| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add s390 support to dump user stack to user space for DWARF
stack unwinding.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-and-tested-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Previously, the cpum_sf PMU was registered even if there is no
sampling mode authorized. Add a check and register cpum_sf only
at least one sampling mode is authorized.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Raw sample was implemented to export the diagnostic samples.
With having this achieved with AUX buffers, there is no requirement
for basic samples to export raw data. In particular, most basic
sampling information are consumed for creating the perf event sample.
Signed-off-by: Pu Hou <bjhoupu@linux.vnet.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Modify PMU callback to use AUX buffer for diagnostic mode sampling.
Basic-mode sampling still use orignal way.
Signed-off-by: Pu Hou <bjhoupu@linux.vnet.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Current implementation uses a private buffer for cpumf to dump samples.
Samples first go to this buffer. Then copy to ring buffer allocated
by perf core. With AUX buffer, this copy is not needed. AUX buffer is
shared and zero-copy mapped to user space. The trailer information at
the end of each SDB(sample data block) is also exported to user space.
AUX buffer is used when diagnostic sampling mode is enabled.
This patch contains functions to setup/free AUX buffer or to begin/end
sampling per-cpu. Also include function called in interrupt to
collect samples.
Signed-off-by: Pu Hou <bjhoupu@linux.vnet.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Current buffer size of 64 is too small. objdump shows that there are
instructions which would require up to 75 bytes buffer (with current
formating). 128 bytes "ought to be enough for anybody".
Also replaces 8 spaces with a single tab to reduce the memory footprint.
Fixes the following KASAN finding:
BUG: KASAN: stack-out-of-bounds in number+0x3fe/0x538
Write of size 1 at addr 000000005a4a75a0 by task bash/1282
CPU: 1 PID: 1282 Comm: bash Not tainted 4.14.0+ #215
Hardware name: IBM 2964 N96 702 (z/VM 6.4.0)
Call Trace:
([<000000000011eeb6>] show_stack+0x56/0x88)
[<0000000000e1ce1a>] dump_stack+0x15a/0x1b0
[<00000000004e2994>] print_address_description+0xf4/0x288
[<00000000004e2cf2>] kasan_report+0x13a/0x230
[<0000000000e38ae6>] number+0x3fe/0x538
[<0000000000e3dfe4>] vsnprintf+0x194/0x948
[<0000000000e3ea42>] sprintf+0xa2/0xb8
[<00000000001198dc>] print_insn+0x374/0x500
[<0000000000119346>] show_code+0x4ee/0x538
[<000000000011f234>] show_registers+0x34c/0x388
[<000000000011f2ae>] show_regs+0x3e/0xa8
[<000000000011f502>] die+0x1ea/0x2e8
[<0000000000138f0e>] do_no_context+0x106/0x168
[<0000000000139a1a>] do_protection_exception+0x4da/0x7d0
[<0000000000e55914>] pgm_check_handler+0x16c/0x1c0
[<000000000090639e>] sysrq_handle_crash+0x46/0x58
([<0000000000000007>] 0x7)
[<00000000009073fa>] __handle_sysrq+0x102/0x218
[<0000000000907c06>] write_sysrq_trigger+0xd6/0x100
[<000000000061d67a>] proc_reg_write+0xb2/0x128
[<0000000000520be6>] __vfs_write+0xee/0x368
[<0000000000521222>] vfs_write+0x21a/0x278
[<000000000052156a>] SyS_write+0xda/0x178
[<0000000000e555cc>] system_call+0xc4/0x270
The buggy address belongs to the page:
page:000003d1016929c0 count:0 mapcount:0 mapping: (null) index:0x0
flags: 0x0()
raw: 0000000000000000 0000000000000000 0000000000000000 ffffffff00000000
raw: 0000000000000100 0000000000000200 0000000000000000 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
000000005a4a7480: 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1
000000005a4a7500: 00 00 00 00 00 00 00 00 f2 f2 f2 f2 00 00 00 00
>000000005a4a7580: 00 00 00 00 f3 f3 f3 f3 00 00 00 00 00 00 00 00
^
000000005a4a7600: 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 f8 f8
000000005a4a7680: f2 f2 f2 f2 f2 f2 f8 f8 f2 f2 f3 f3 f3 f3 00 00
==================================================================
Cc: <stable@vger.kernel.org>
Signed-off-by: Vasily Gorbik <gor@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Remove the CPU_ALTERNATIVES config option and enable the code
unconditionally. The config option was only added to avoid a conflict
with the named saved segment support. Since that code is gone there is
no reason to keep the CPU_ALTERNATIVES config option.
Just enable it unconditionally to also reduce the number of config
options and make it less likely that something breaks.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
The vdso code for the getcpu() and the clock_gettime() call use the access
register mode to access the per-CPU vdso data page with the current code.
An alternative to the complicated AR mode is to use the secondary space
mode. This makes the vdso faster and quite a bit simpler. The downside is
that the uaccess code has to be changed quite a bit.
Which instructions are used depends on the machine and what kind of uaccess
operation is requested. The instruction dictates which ASCE value needs
to be loaded into %cr1 and %cr7.
The different cases:
* User copy with MVCOS for z10 and newer machines
The MVCOS instruction can copy between the primary space (aka user) and
the home space (aka kernel) directly. For set_fs(KERNEL_DS) the kernel
ASCE is loaded into %cr1. For set_fs(USER_DS) the user space is already
loaded in %cr1.
* User copy with MVCP/MVCS for older machines
To be able to execute the MVCP/MVCS instructions the kernel needs to
switch to primary mode. The control register %cr1 has to be set to the
kernel ASCE and %cr7 to either the kernel ASCE or the user ASCE dependent
on set_fs(KERNEL_DS) vs set_fs(USER_DS).
* Data access in the user address space for strnlen / futex
To use "normal" instruction with data from the user address space the
secondary space mode is used. The kernel needs to switch to primary mode,
%cr1 has to contain the kernel ASCE and %cr7 either the user ASCE or the
kernel ASCE, dependent on set_fs.
To load a new value into %cr1 or %cr7 is an expensive operation, the kernel
tries to be lazy about it. E.g. for multiple user copies in a row with
MVCP/MVCS the replacement of the vdso ASCE in %cr7 with the user ASCE is
done only once. On return to user space a CPU bit is checked that loads the
vdso ASCE again.
To enable and disable the data access via the secondary space two new
functions are added, enable_sacf_uaccess and disable_sacf_uaccess. The fact
that a context is in secondary space uaccess mode is stored in the
mm_segment_t value for the task. The code of an interrupt may use set_fs
as long as it returns to the previous state it got with get_fs with another
call to set_fs. The code in finish_arch_post_lock_switch simply has to do a
set_fs with the current mm_segment_t value for the task.
For CPUs with MVCOS:
CPU running in | %cr1 ASCE | %cr7 ASCE |
--------------------------------------|-----------|-----------|
user space | user | vdso |
kernel, USER_DS, normal-mode | user | vdso |
kernel, USER_DS, normal-mode, lazy | user | user |
kernel, USER_DS, sacf-mode | kernel | user |
kernel, KERNEL_DS, normal-mode | kernel | vdso |
kernel, KERNEL_DS, normal-mode, lazy | kernel | kernel |
kernel, KERNEL_DS, sacf-mode | kernel | kernel |
For CPUs without MVCOS:
CPU running in | %cr1 ASCE | %cr7 ASCE |
--------------------------------------|-----------|-----------|
user space | user | vdso |
kernel, USER_DS, normal-mode | user | vdso |
kernel, USER_DS, normal-mode lazy | kernel | user |
kernel, USER_DS, sacf-mode | kernel | user |
kernel, KERNEL_DS, normal-mode | kernel | vdso |
kernel, KERNEL_DS, normal-mode, lazy | kernel | kernel |
kernel, KERNEL_DS, sacf-mode | kernel | kernel |
The lines with "lazy" refer to the state after a copy via the secondary
space with a delayed reload of %cr1 and %cr7.
There are three hardware address spaces that can cause a DAT exception,
primary, secondary and home space. The exception can be related to
four different fault types: user space fault, vdso fault, kernel fault,
and the gmap faults.
Dependent on the set_fs state and normal vs. sacf mode there are a number
of fault combinations:
1) user address space fault via the primary ASCE
2) gmap address space fault via the primary ASCE
3) kernel address space fault via the primary ASCE for machines with
MVCOS and set_fs(KERNEL_DS)
4) vdso address space faults via the secondary ASCE with an invalid
address while running in secondary space in problem state
5) user address space fault via the secondary ASCE for user-copy
based on the secondary space mode, e.g. futex_ops or strnlen_user
6) kernel address space fault via the secondary ASCE for user-copy
with secondary space mode with set_fs(KERNEL_DS)
7) kernel address space fault via the primary ASCE for user-copy
with secondary space mode with set_fs(USER_DS) on machines without
MVCOS.
8) kernel address space fault via the home space ASCE
Replace user_space_fault() with a new function get_fault_type() that
can distinguish all four different fault types.
With these changes the futex atomic ops from the kernel and the
strnlen_user will get a little bit slower, as well as the old style
uaccess with MVCP/MVCS. All user accesses based on MVCOS will be as
fast as before. On the positive side, the user space vdso code is a
lot faster and Linux ceases to use the complicated AR mode.
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
The identification of guest fault currently relies on the PF_VCPU flag.
This is set in guest_entry_irqoff and cleared in guest_exit_irqoff.
Both functions are called by __vcpu_run, the PF_VCPU flag is set for
quite a lot of kernel code outside of the guest execution.
Replace the PF_VCPU scheme with the PIF_GUEST_FAULT in the pt_regs and
make the program check handler code in entry.S set the bit only for
exception that occurred between the .Lsie_gmap and .Lsie_done labels.
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Yet another big pile of changes:
- More year 2038 work from Arnd slowly reaching the point where we
need to think about the syscalls themself.
- A new timer function which allows to conditionally (re)arm a timer
only when it's either not running or the new expiry time is sooner
than the armed expiry time. This allows to use a single timer for
multiple timeout requirements w/o caring about the first expiry
time at the call site.
- A new NMI safe accessor to clock real time for the printk timestamp
work. Can be used by tracing, perf as well if required.
- A large number of timer setup conversions from Kees which got
collected here because either maintainers requested so or they
simply got ignored. As Kees pointed out already there are a few
trivial merge conflicts and some redundant commits which was
unavoidable due to the size of this conversion effort.
- Avoid a redundant iteration in the timer wheel softirq processing.
- Provide a mechanism to treat RTC implementations depending on their
hardware properties, i.e. don't inflict the write at the 0.5
seconds boundary which originates from the PC CMOS RTC to all RTCs.
No functional change as drivers need to be updated separately.
- The usual small updates to core code clocksource drivers. Nothing
really exciting"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits)
timers: Add a function to start/reduce a timer
pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday()
timer: Prepare to change all DEFINE_TIMER() callbacks
netfilter: ipvs: Convert timers to use timer_setup()
scsi: qla2xxx: Convert timers to use timer_setup()
block/aoe: discover_timer: Convert timers to use timer_setup()
ide: Convert timers to use timer_setup()
drbd: Convert timers to use timer_setup()
mailbox: Convert timers to use timer_setup()
crypto: Convert timers to use timer_setup()
drivers/pcmcia: omap1: Fix error in automated timer conversion
ARM: footbridge: Fix typo in timer conversion
drivers/sgi-xp: Convert timers to use timer_setup()
drivers/pcmcia: Convert timers to use timer_setup()
drivers/memstick: Convert timers to use timer_setup()
drivers/macintosh: Convert timers to use timer_setup()
hwrng/xgene-rng: Convert timers to use timer_setup()
auxdisplay: Convert timers to use timer_setup()
sparc/led: Convert timers to use timer_setup()
mips: ip22/32: Convert timers to use timer_setup()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
"Since Martin is on vacation you get the s390 pull request for the
v4.15 merge window this time from me.
Besides a lot of cleanups and bug fixes these are the most important
changes:
- a new regset for runtime instrumentation registers
- hardware accelerated AES-GCM support for the aes_s390 module
- support for the new CEX6S crypto cards
- support for FORTIFY_SOURCE
- addition of missing z13 and new z14 instructions to the in-kernel
disassembler
- generate opcode tables for the in-kernel disassembler out of a
simple text file instead of having to manually maintain those
tables
- fast memset16, memset32 and memset64 implementations
- removal of named saved segment support
- hardware counter support for z14
- queued spinlocks and queued rwlocks implementations for s390
- use the stack_depth tracking feature for s390 BPF JIT
- a new s390_sthyi system call which emulates the sthyi (store
hypervisor information) instruction
- removal of the old KVM virtio transport
- an s390 specific CPU alternatives implementation which is used in
the new spinlock code"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (88 commits)
MAINTAINERS: add virtio-ccw.h to virtio/s390 section
s390/noexec: execute kexec datamover without DAT
s390: fix transactional execution control register handling
s390/bpf: take advantage of stack_depth tracking
s390: simplify transactional execution elf hwcap handling
s390/zcrypt: Rework struct ap_qact_ap_info.
s390/virtio: remove unused header file kvm_virtio.h
s390: avoid undefined behaviour
s390/disassembler: generate opcode tables from text file
s390/disassembler: remove insn_to_mnemonic()
s390/dasd: avoid calling do_gettimeofday()
s390: vfio-ccw: Do not attempt to free no-op, test and tic cda.
s390: remove named saved segment support
s390/archrandom: Reconsider s390 arch random implementation
s390/pci: do not require AIS facility
s390/qdio: sanitize put_indicator
s390/qdio: use atomic_cmpxchg
s390/nmi: avoid using long-displacement facility
s390: pass endianness info to sparse
s390/decompressor: remove informational messages
...
|
|
Rebooting into a new kernel with kexec fails (system dies) if tried on
a machine that has no-execute support. Reason for this is that the so
called datamover code gets executed with DAT on (MMU is active) and
the page that contains the datamover is marked as non-executable.
Therefore when branching into the datamover an unexpected program
check happens and afterwards the machine is dead.
This can be simply avoided by disabling DAT, which also disables any
no-execute checks, just before the datamover gets executed.
In fact the first thing done by the datamover is to disable DAT. The
code in the datamover that disables DAT can be removed as well.
Thanks to Michael Holzheu and Gerald Schaefer for tracking this down.
Reviewed-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Reviewed-by: Philipp Rudo <prudo@linux.vnet.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Fixes: 57d7f939e7bd ("s390: add no-execute support")
Cc: <stable@vger.kernel.org> # v4.11+
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
Dan Horák reported the following crash related to transactional execution:
User process fault: interruption code 0013 ilc:3 in libpthread-2.26.so[3ff93c00000+1b000]
CPU: 2 PID: 1 Comm: /init Not tainted 4.13.4-300.fc27.s390x #1
Hardware name: IBM 2827 H43 400 (z/VM 6.4.0)
task: 00000000fafc8000 task.stack: 00000000fafc4000
User PSW : 0705200180000000 000003ff93c14e70
R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:1 AS:0 CC:2 PM:0 RI:0 EA:3
User GPRS: 0000000000000077 000003ff00000000 000003ff93144d48 000003ff93144d5e
0000000000000000 0000000000000002 0000000000000000 000003ff00000000
0000000000000000 0000000000000418 0000000000000000 000003ffcc9fe770
000003ff93d28f50 000003ff9310acf0 000003ff92b0319a 000003ffcc9fe6d0
User Code: 000003ff93c14e62: 60e0b030 std %f14,48(%r11)
000003ff93c14e66: 60f0b038 std %f15,56(%r11)
#000003ff93c14e6a: e5600000ff0e tbegin 0,65294
>000003ff93c14e70: a7740006 brc 7,3ff93c14e7c
000003ff93c14e74: a7080000 lhi %r0,0
000003ff93c14e78: a7f40023 brc 15,3ff93c14ebe
000003ff93c14e7c: b2220000 ipm %r0
000003ff93c14e80: 8800001c srl %r0,28
There are several bugs with control register handling with respect to
transactional execution:
- on task switch update_per_regs() is only called if the next task has
an mm (is not a kernel thread). This however is incorrect. This
breaks e.g. for user mode helper handling, where the kernel creates
a kernel thread and then execve's a user space program. Control
register contents related to transactional execution won't be
updated on execve. If the previous task ran with transactional
execution disabled then the new task will also run with
transactional execution disabled, which is incorrect. Therefore call
update_per_regs() unconditionally within switch_to().
- on startup the transactional execution facility is not enabled for
the idle thread. This is not really a bug, but an inconsistency to
other facilities. Therefore enable the facility if it is available.
- on fork the new thread's per_flags field is not cleared. This means
that a child process inherits the PER_FLAG_NO_TE flag. This flag can
be set with a ptrace request to disable transactional execution for
the current process. It should not be inherited by new child
processes in order to be consistent with the handling of all other
PER related debugging options. Therefore clear the per_flags field in
copy_thread_tls().
Reported-and-tested-by: Dan Horák <dan@danny.cz>
Fixes: d35339a42dd1 ("s390: add support for transactional memory")
Cc: <stable@vger.kernel.org> # v3.7+
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
Just use MACHINE_HAS_TE to decide if HWCAP_S390_TE needs
to be added to elf_hwcap.
Suggested-by: Dan Horák <dan@danny.cz>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
With commit 7fb2b2d51244 ("s390/virtio: remove the old KVM virtio
transport") the pre-ccw virtio transport for s390 was removed. To
complete the removal the uapi header file that contains the related data
structures must also be removed.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
The current way of adding new instructions to the opcode tables is
painful and error prone. Therefore add, similar to binutils, a text
file which contains all opcodes and the corresponding mnemonics and
instruction formats.
A small gen_opcode_table tool then generates a header file with the
required enums and opcode table initializers at the prepare step of
the kernel build.
This way only a simple text file has to be maintained, which can be
rather easily extended.
Unlike before where there were plenty of opcode tables and a large
switch statement to find the correct opcode table, there is now only
one opcode table left which contains all instructions. A second opcode
offset table now contains offsets within the opcode table to find
instructions which have the same opcode prefix. In order to save space
all 1-byte opcode instructions are grouped together at the end of the
opcode table. This is also quite similar to like it was before.
In addition also move and change code and definitions within the
disassembler. As a side effect this reduces the size required for the
code and opcode tables by ~1.5k.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
insn_to_mnemonic() was introduced ages ago for KVM debugging, but is
unused in the meantime. Therefore remove it.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
Remove the support to create a z/VM named saved segment (NSS). This
feature is not supported since quite a while in favour of jump labels,
function tracing and (now) CPU alternatives. All of these features
require to write to the kernel text section which is not possible if
the kernel is contained within an NSS.
Given that memory savings are minimal if kernel images are shared and
in addition updates of shared images are painful, the NSS feature can
be removed.
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull initial SPDX identifiers from Greg KH:
"License cleanup: add SPDX license identifiers to some files
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the
'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally
binding shorthand, which can be used instead of the full boiler plate
text.
This patch is based on work done by Thomas Gleixner and Kate Stewart
and Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset
of the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to
license had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied
to a file was done in a spreadsheet of side by side results from of
the output of two independent scanners (ScanCode & Windriver)
producing SPDX tag:value files created by Philippe Ombredanne.
Philippe prepared the base worksheet, and did an initial spot review
of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537
files assessed. Kate Stewart did a file by file comparison of the
scanner results in the spreadsheet to determine which SPDX license
identifier(s) to be applied to the file. She confirmed any
determination that was not immediately clear with lawyers working with
the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained
>5 lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that
was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that
became the concluded license(s).
- when there was disagreement between the two scanners (one detected
a license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply
(and which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases,
confirmation by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.
The Windriver scanner is based on an older version of FOSSology in
part, so they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot
checks in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect
the correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial
patch version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch
license was not GPL-2.0 WITH Linux-syscall-note to ensure that the
applied SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
License cleanup: add SPDX license identifier to uapi header files with a license
License cleanup: add SPDX license identifier to uapi header files with no license
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
|
|
__LC_MCESAD is currently 4528 /* offsetof(struct lowcore, mcesad) */
that would require long-displacement facility for lg, which we don't
have on z900.
Fixes: 3037a52f9846 ("s390/nmi: do register validation as early as possible")
Signed-off-by: Vasily Gorbik <gor@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add the hardware counters that are available with z14. With z14,
the number of problem-state counters is reduced. The initialization
is updated respectively.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
The new detection code for guest machine checks added a check based
on %r11 to .Lcleanup_sie to distinguish between normal asynchronous
interrupts and machine checks. But the funtion is called from the
program check handler as well with an undefined value in %r11.
The effect is that all program exceptions pointing to the SIE instruction
will set the CIF_MCCK_GUEST bit. The bit stays set for the CPU until the
next machine check comes in which will incorrectly be interpreted as a
guest machine check.
The simplest fix is to stop using .Lcleanup_sie in the program check
handler and duplicate a few instructions.
Fixes: c929500d7a5a ("s390/nmi: s390: New low level handling for machine check happening in guest")
Cc: <stable@vger.kernel.org> # v4.13+
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
The validation of the CPU registers in the machine check handler is
currently split into two parts. The first part is done at the start
of the low level mcck_int_handler function, this includes the CPU
timer register and the general purpose registers.
The second part is done a bit later in s390_do_machine_check for all
the other registers, including the control registers, floating pointer
control, vector or floating pointer registers, the access registers,
the guarded storage registers, the TOD programmable registers and the
clock comparator.
This is working fine to far but in theory a future extensions could
cause the C code to use registers that are not validated yet. A better
approach is to validate all CPU registers in "safe" assembler code
before any C function is called.
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
The machine check extended save area is needed to store the vector
registers and the guarded storage control block when a CPU is
interrupted by a machine check.
Move the slab cache allocation of the full save area to nmi.c,
for early boot use a static __initdata block.
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Add a decoding union for the bits in control registers 2 and use
'union ctlreg0' and 'union ctlreg2' in update_cr_regs to improve
readability.
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
The smp_send_stop() function can be called from s390_handle_damage
while DAT is off. This happens if a machine check indicates that
kernel gprs or control registers can not be restored. The function
smp_send_stop reenables DAT via __load_psw_mask. That should work
for the case of lost kernel gprs and the system will do the expected
stop of all CPUs. But if control registers are lost, in particular
CR13 with the home space ASCE, interesting secondary crashes may
occur.
Make smp_emergency_stop callable from nmi.c and remove the cpumask
argument. Replace the smp_send_stop call with smp_emergency_stop in
the s390_handle_damage function.
In addition add notrace and NOKPROBE_SYMBOL annotations for all
functions required for the emergency shutdown.
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
The boot_vdso_data variable is related to the vdso code, the magic of the
initial vdso area for the early boot and the replacement of it in vdso_init
should all be put into vdso.c.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Implement CPU alternatives, which allows to optionally patch newer
instructions at runtime, based on CPU facilities availability.
A new kernel boot parameter "noaltinstr" disables patching.
Current implementation is derived from x86 alternatives. Although
ideal instructions padding (when altinstr is longer then oldinstr)
is added at compile time, and no oldinstr nops optimization has to be
done at runtime. Also couple of compile time sanity checks are done:
1. oldinstr and altinstr must be <= 254 bytes long,
2. oldinstr and altinstr must not have an odd length.
alternative(oldinstr, altinstr, facility);
alternative_2(oldinstr, altinstr1, facility1, altinstr2, facility2);
Both compile time and runtime padding consists of either 6/4/2 bytes nop
or a jump (brcl) + 2 bytes nop filler if padding is longer then 6 bytes.
.altinstructions and .altinstr_replacement sections are part of
__init_begin : __init_end region and are freed after initialization.
Signed-off-by: Vasily Gorbik <gor@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
debug_event_common memsets the active debug entry with zeros to
prevent stale data leakage. This is overwritten with the actual
debug data in the next step. Only write zeros to that part of the
debug entry that's not used by new debug data.
Micro benchmarks show a 2-10% reduction of cpu cycles with this
approach.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Acked-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
debug_event currently truncates the data if used with a size larger than
the buf_size of the debug feature. For lots of callers of this function,
wrappers have been implemented that loop until all data is handled.
Move that functionality into debug_event_common and get rid of the wrappers.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Acked-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Before kexec boots to a crash kernel it checks whether the image in memory
changed after load. This is done by the function kdump_csum_valid, which
returns true, i.e. an int != 0, on success and 0 otherwise. In other words
when kdump_csum_valid returns an error code it means that the validation
succeeded. This is not only counterintuitive but also produces the wrong
result if the kernel was build without CONFIG_CRASH_DUMP. Fix this by
making kdump_csum_valid return a bool.
Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com>
Acked-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
The debug feature code hasn't been touched in ages and the code also
looks like this. Therefore clean up the code so it looks a bit more
like current coding style.
There is no functional change - actually I made also sure that the
generated code with performance_defconfig is identical.
A diff of old vs new with "objdump -d" is empty.
The code is still not checkpatch clean, but that was not the goal.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
On CPU hotplug some cpu stats contain bogus values:
$ cat /proc/stat
cpu 0 0 49 1280 0 0 0 3 0 0
cpu0 0 0 49 618 0 0 0 3 0 0
cpu1 0 0 0 662 0 0 0 0 0 0
[...]
$ echo 0 > /sys/devices/system/cpu/cpu1/online
$ echo 1 > /sys/devices/system/cpu/cpu1/online
$ cat /proc/stat
cpu 0 0 49 3200 0 450359962737 450359962737 3 0 0
cpu0 0 0 49 1956 0 0 0 3 0 0
cpu1 0 0 0 1244 0 450359962737 450359962737 0 0 0
[...]
pcpu_attach_task() needs the same assignments as vtime_task_switch.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Fixes: b7394a5f4ce9 ("sched/cputime, s390: Implement delayed accounting of system time")
Cc: stable@vger.kernel.org # 4.11+
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
For an unknown reason the s390 kprobes instruction replacement
function modifies the kprobe_status of the current CPU to
KPROBE_SWAP_INST. This was supposed to catch traps that happened
during instruction patching. Such a fault is not supposed to happen,
and silently discarding such a fault is certainly also not what we
want. In fact s390 is the only architecture which has this odd piece
of code.
Just remove this and behave like all other architectures. This was
pointed out by Jens Remus.
Reported-by: Jens Remus <jremus@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Use memset64 instead of the (now) open-coded variant clear_table.
Performance wise there is no difference.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Add the store-hypervisor-information code into features
using a tip branch for parallel merging into the KVM tree.
|
|
Add a syscall of s390_sthyi to implement STHYI instruction in LPAR
which reuses the implementation for KVM by Janosch Frank -
commit 95ca2cb57985 ("KVM: s390: Add sthyi emulation").
STHYI(Store Hypervisor Information) is an emulated z/VM instruction that
provides a guest with basic information about the layers it is running
on. This includes information about the cpu configuration of both the
machine and the lpar, as well as their names, machine model and
machine type. This information enables an application to determine the
maximum capacity of CPs and IFLs available to software.
For the arguments of s390_sthyi, code shall be 0 and flags is reserved for
future use, info is the output argument to store the required hypervisor
info.
Signed-off-by: QingFeng Hao <haoqf@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
STHYI requires extensive locking in the higher hypervisors and is
very computational/memory expensive. Therefore we cache the retrieved
hypervisor info whose valid period is 1s with mutex to allow concurrent
access. rw semaphore can't benefit here due to cache line bounce.
Signed-off-by: QingFeng Hao <haoqf@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
As we need to support sthyi instruction on LPAR too, move the common code
to kernel part and kvm related code to intercept.c for better reuse.
Signed-off-by: QingFeng Hao <haoqf@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
This removes uses of TIMER_DEFERRED_INITIALIZER and chooses a location
to call timer_setup() from before add_timer() or mod_timer() is called.
Adjusts callbacks to use from_timer() as needed.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mips@linux-mips.org
Cc: Petr Mladek <pmladek@suse.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Kalle Valo <kvalo@qca.qualcomm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: linux1394-devel@lists.sourceforge.net
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: linux-s390@vger.kernel.org
Cc: linux-wireless@vger.kernel.org
Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Ursula Braun <ubraun@linux.vnet.ibm.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Harish Patil <harish.patil@cavium.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Manish Chopra <manish.chopra@cavium.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-pm@vger.kernel.org
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Mark Gross <mark.gross@intel.com>
Cc: linux-watchdog@vger.kernel.org
Cc: linux-scsi@vger.kernel.org
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Michael Reed <mdr@sgi.com>
Cc: netdev@vger.kernel.org
Cc: Tejun Heo <tj@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lkml.kernel.org/r/1507159627-127660-7-git-send-email-keescook@chromium.org
|
|
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
This instruction came with a z/VM extension and not with a specific
machine generation.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Remove a couple of instructions that are listed twice.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
The e7 opcode table does not have an end marker. Hence when trying to
find an unknown e7 instruction the code will access memory behind the
table until it finds something that matches the opcode, or the kernel
crashes, whatever comes first.
This affects not only the in-kernel disassembler but also uprobes and
kprobes which refuse to set a probe on unknown instructions, and
therefore search the opcode tables to figure out if instructions are
known or not.
Cc: <stable@vger.kernel.org> # v3.18+
Fixes: 3585cb0280654 ("s390/disassembler: add vector instructions")
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
The queued spinlock code for s390 follows the principles of the common
code qspinlock implementation but with a few notable differences.
The format of the spinlock_t locking word differs, s390 needs to store
the logical CPU number of the lock holder in the spinlock_t to be able
to use the diagnose 9c directed yield hypervisor call.
The inline code sequences for spin_lock and spin_unlock are nice and
short. The inline portion of a spin_lock now typically looks like this:
lhi %r0,0 # 0 indicates an empty lock
l %r1,0x3a0 # CPU number + 1 from lowcore
cs %r0,%r1,<some_lock> # lock operation
jnz call_wait # on failure call wait function
locked:
...
call_wait:
la %r2,<some_lock>
brasl %r14,arch_spin_lock_wait
j locked
A spin_unlock is as simple as before:
lhi %r0,0
sth %r0,2(%r2) # unlock operation
After a CPU has queued itself it may not enable interrupts again for the
arch_spin_lock_flags() variant. The arch_spin_lock_wait_flags wait function
is removed.
To improve performance the code implements opportunistic lock stealing.
If the wait function finds a spinlock_t that indicates that the lock is
free but there are queued waiters, the CPU may steal the lock up to three
times without queueing itself. The lock stealing update the steal counter
in the lock word to prevent more than 3 steals. The counter is reset at
the time the CPU next in the queue successfully takes the lock.
While the queued spinlocks improve performance in a system with dedicated
CPUs, in a virtualized environment with continuously overcommitted CPUs
the queued spinlocks can have a negative effect on performance. This
is due to the fact that a queued CPU that is preempted by the hypervisor
will block the queue at some point even without holding the lock. With
the classic spinlock it does not matter if a CPU is preempted that waits
for the lock. Therefore use the queued spinlock code only if the system
runs with dedicated CPUs and fall back to classic spinlocks when running
with shared CPUs.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
The topology information returned by STSI 15.x.x contains a flag
if the CPUs of a topology-list are dedicated or shared. Make this
information available if the machine provides topology information.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
