summaryrefslogtreecommitdiff
path: root/arch/powerpc/mm/mem.c
AgeCommit message (Collapse)AuthorFilesLines
2019-02-21Merge branch 'topic/dma' into nextMichael Ellerman1-22/+0
Merge hch's big DMA rework series. This is in a topic branch in case he wants to merge it to minimise conflicts.
2019-02-18powerpc/dma: use the dma-direct allocator for coherent platformsChristoph Hellwig1-22/+0
The generic code allows a few nice things such as node local allocations and dipping into the CMA area. The lookup of the right zone for a given dma mask works a little different, but the results should be the same. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-02-04powerpc: Drop page_is_ram() and walk_system_ram_range()Christophe Leroy1-33/+6
Since commit c40dd2f76644 ("powerpc: Add System RAM to /proc/iomem") it is possible to use the generic walk_system_ram_range() and the generic page_is_ram(). To enable the use of walk_system_ram_range() by the IBM EHEA ethernet driver, we still need an export of the generic function. As powerpc was the only user of CONFIG_ARCH_HAS_WALK_MEMORY, the ifdef around the generic walk_system_ram_range() has become useless and can be dropped. Fixes: c40dd2f76644 ("powerpc: Add System RAM to /proc/iomem") Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> [mpe: Keep the EXPORT_SYMBOL_GPL in powerpc code] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-28mm, memory_hotplug: add nid parameter to arch_remove_memoryOscar Salvador1-1/+2
Patch series "Do not touch pages in hot-remove path", v2. This patchset aims for two things: 1) A better definition about offline and hot-remove stage 2) Solving bugs where we can access non-initialized pages during hot-remove operations [2] [3]. This is achieved by moving all page/zone handling to the offline stage, so we do not need to access pages when hot-removing memory. [1] https://patchwork.kernel.org/cover/10691415/ [2] https://patchwork.kernel.org/patch/10547445/ [3] https://www.spinics.net/lists/linux-mm/msg161316.html This patch (of 5): This is a preparation for the following-up patches. The idea of passing the nid is that it will allow us to get rid of the zone parameter afterwards. Link: http://lkml.kernel.org/r/20181127162005.15833-2-osalvador@suse.de Signed-off-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-20powerpc: use mm zones more sensiblyChristoph Hellwig1-30/+17
Powerpc has somewhat odd usage where ZONE_DMA is used for all memory on common 64-bit configfs, and ZONE_DMA32 is used for 31-bit schemes. Move to a scheme closer to what other architectures use (and I dare to say the intent of the system): - ZONE_DMA: optionally for memory < 31-bit (64-bit embedded only) - ZONE_NORMAL: everything addressable by the kernel - ZONE_HIGHMEM: memory > 32-bit for 32-bit kernels Also provide information on how ZONE_DMA is used by defining ARCH_ZONE_DMA_BITS. Contains various fixes from Benjamin Herrenschmidt. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-11-26powerpc: change CONFIG_PPC_STD_MMU to CONFIG_PPC_BOOK3SChristophe Leroy1-2/+2
Today we have: config PPC_BOOK3S def_bool y depends on PPC_BOOK3S_32 || PPC_BOOK3S_64 config PPC_STD_MMU def_bool y depends on PPC_BOOK3S PPC_STD_MMU is therefore redundant with PPC_BOOK3S. Lets remove it. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-31mm: remove include/linux/bootmem.hMike Rapoport1-2/+1
Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include <linux/memblock.h> @@ @@ - #include <linux/bootmem.h> + #include <linux/memblock.h> [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31memblock: rename free_all_bootmem to memblock_free_allMike Rapoport1-1/+1
The conversion is done using sed -i 's@free_all_bootmem@memblock_free_all@' \ $(git grep -l free_all_bootmem) Link: http://lkml.kernel.org/r/1536927045-23536-26-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-14powerpc/mm: don't use _PAGE_EXEC for calling hash_preload()Christophe Leroy1-4/+5
The 'access' parameter of hash_preload() is either 0 or _PAGE_EXEC. Among the two versions of hash_preload(), only the PPC64 one is doing something with this 'access' parameter. In order to remove the use of _PAGE_EXEC outside platform code, 'access' parameter is replaced by 'is_exec' which will be either true of false, and the PPC64 version of hash_preload() creates the access flag based on 'is_exec'. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-14powerpc: handover page flags with a pgprot_t parameterChristophe Leroy1-2/+2
In order to avoid multiple conversions, handover directly a pgprot_t to map_kernel_page() as already done for radix. Do the same for __ioremap_caller() and __ioremap_at(). Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-09-18powerpc: Avoid code patching freed init sectionsMichael Neuling1-0/+2
This stops us from doing code patching in init sections after they've been freed. In this chain: kvm_guest_init() -> kvm_use_magic_page() -> fault_in_pages_readable() -> __get_user() -> __get_user_nocheck() -> barrier_nospec(); We have a code patching location at barrier_nospec() and kvm_guest_init() is an init function. This whole chain gets inlined, so when we free the init section (hence kvm_guest_init()), this code goes away and hence should no longer be patched. We seen this as userspace memory corruption when using a memory checker while doing partition migration testing on powervm (this starts the code patching post migration via /sys/kernel/mobility/migration). In theory, it could also happen when using /sys/kernel/debug/powerpc/barrier_nospec. Cc: stable@vger.kernel.org # 4.13+ Signed-off-by: Michael Neuling <mikey@neuling.org> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-15treewide: use PHYS_ADDR_MAX to avoid type casting ULLONG_MAXStefan Agner1-1/+1
With PHYS_ADDR_MAX there is now a type safe variant for all bits set. Make use of it. Patch created using a semantic patch as follows: // <smpl> @@ typedef phys_addr_t; @@ -(phys_addr_t)ULLONG_MAX +PHYS_ADDR_MAX // </smpl> Link: http://lkml.kernel.org/r/20180419214204.19322-1-stefan@agner.ch Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-03powerpc/64s/radix: prefetch user address in update_mmu_cacheNicholas Piggin1-1/+3
Prefetch the faulting address in update_mmu_cache to give the page table walker perhaps 100 cycles head start as locks are dropped and the interrupt completed. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-24powerpc/mm: Flush cache on memory hot(un)plugBalbir Singh1-0/+2
This patch adds support for flushing potentially dirty cache lines when memory is hot-plugged/hot-un-plugged. The support is currently limited to 64 bit systems. The bug was exposed when mappings for a device were actually hot-unplugged and plugged in back later. A similar issue was observed during the development of memtrace, but memtrace does it's own flushing of region via a custom routine. These patches do a flush both on hotplug/unplug to clear any stale data in the cache w.r.t mappings, there is a small race window where a clean cache line may be created again just prior to tearing down the mapping. The patches were tested by disabling the flush routines in memtrace and doing I/O on the trace file. The system immediately checkstops (quite reliablly if prior to the hot-unplug of the memtrace region, we memset the regions we are about to hot unplug). After these patches no custom flushing is needed in the memtrace code. Fixes: 9d5171a8f248 ("powerpc/powernv: Enable removal of memory for in memory tracing") Cc: stable@vger.kernel.org # v4.14+ Signed-off-by: Balbir Singh <bsingharora@gmail.com> Acked-by: Reza Arbab <arbab@linux.ibm.com> Reviewed-by: Rashmica Gupta <rashmica.g@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-31powerpc/mm: Use memblock API for PPC32 page_is_ramJonathan Neuschäfer1-4/+0
To support accurate checking for different blocks of memory on PPC32, use the same memblock-based approach that's already used on PPC64 also on PPC32. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-31powerpc/mm: Simplify page_is_ram by using memblock_is_memoryJonathan Neuschäfer1-7/+1
Instead of open-coding the search in page_is_ram, call memblock_is_memory. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-31Merge branch 'topic/paca' into nextMichael Ellerman1-3/+6
Bring in yet another series that touches KVM code, and might need to be merged into the kvm-ppc branch to resolve conflicts. This required some changes in pnv_power9_force_smt4_catch/release() due to the paca array becomming an array of pointers.
2018-03-30powerpc/mm: Pass node id into create_section_mappingNicholas Piggin1-2/+2
Signed-off-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Move __map_kernel_page_nid() inside #ifdef SPARSEMEM_VMEMMAP] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-30powerpc/mm/numa: move numa topology discovery earlierNicholas Piggin1-1/+4
Split sparsemem initialisation from basic numa topology discovery. Move the parsing earlier in boot, before pacas are allocated. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-27powerpc/mm: Fix section mismatch warning in stop_machine_change_mapping()Mauricio Faria de Oliveira1-2/+2
Fix the warning messages for stop_machine_change_mapping(), and a number of other affected functions in its call chain. All modified functions are under CONFIG_MEMORY_HOTPLUG, so __meminit is okay (keeps them / does not discard them). Boot-tested on powernv/power9/radix-mmu and pseries/power8/hash-mmu. $ make -j$(nproc) CONFIG_DEBUG_SECTION_MISMATCH=y vmlinux ... MODPOST vmlinux.o WARNING: vmlinux.o(.text+0x6b130): Section mismatch in reference from the function stop_machine_change_mapping() to the function .meminit.text:create_physical_mapping() The function stop_machine_change_mapping() references the function __meminit create_physical_mapping(). This is often because stop_machine_change_mapping lacks a __meminit annotation or the annotation of create_physical_mapping is wrong. WARNING: vmlinux.o(.text+0x6b13c): Section mismatch in reference from the function stop_machine_change_mapping() to the function .meminit.text:create_physical_mapping() The function stop_machine_change_mapping() references the function __meminit create_physical_mapping(). This is often because stop_machine_change_mapping lacks a __meminit annotation or the annotation of create_physical_mapping is wrong. ... Signed-off-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> Acked-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-02-06Merge tag 'libnvdimm-for-4.16' of ↵Linus Torvalds1-6/+5
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Ross Zwisler: - Require struct page by default for filesystem DAX to remove a number of surprising failure cases. This includes failures with direct I/O, gdb and fork(2). - Add support for the new Platform Capabilities Structure added to the NFIT in ACPI 6.2a. This new table tells us whether the platform supports flushing of CPU and memory controller caches on unexpected power loss events. - Revamp vmem_altmap and dev_pagemap handling to clean up code and better support future future PCI P2P uses. - Deprecate the ND_IOCTL_SMART_THRESHOLD command whose payload has become out-of-sync with recent versions of the NVDIMM_FAMILY_INTEL spec, and instead rely on the generic ND_CMD_CALL approach used by the two other IOCTL families, NVDIMM_FAMILY_{HPE,MSFT}. - Enhance nfit_test so we can test some of the new things added in version 1.6 of the DSM specification. This includes testing firmware download and simulating the Last Shutdown State (LSS) status. * tag 'libnvdimm-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (37 commits) libnvdimm, namespace: remove redundant initialization of 'nd_mapping' acpi, nfit: fix register dimm error handling libnvdimm, namespace: make min namespace size 4K tools/testing/nvdimm: force nfit_test to depend on instrumented modules libnvdimm/nfit_test: adding support for unit testing enable LSS status libnvdimm/nfit_test: add firmware download emulation nfit-test: Add platform cap support from ACPI 6.2a to test libnvdimm: expose platform persistence attribute for nd_region acpi: nfit: add persistent memory control flag for nd_region acpi: nfit: Add support for detect platform CPU cache flush on power loss device-dax: Fix trailing semicolon libnvdimm, btt: fix uninitialized err_lock dax: require 'struct page' by default for filesystem dax ext2: auto disable dax instead of failing mount ext4: auto disable dax instead of failing mount mm, dax: introduce pfn_t_special() mm: Fix devm_memremap_pages() collision handling mm: Fix memory size alignment in devm_memremap_pages_release() memremap: merge find_dev_pagemap into get_dev_pagemap memremap: change devm_memremap_pages interface to use struct dev_pagemap ...
2018-01-08mm: pass the vmem_altmap to arch_remove_memory and __remove_pagesChristoph Hellwig1-4/+2
We can just pass this on instead of having to do a radix tree lookup without proper locking 2 levels into the callchain. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-01-08mm: pass the vmem_altmap to arch_add_memory and __add_pagesChristoph Hellwig1-2/+3
We can just pass this on instead of having to do a radix tree lookup without proper locking 2 levels into the callchain. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-12-04powerpc: Use pr_warn instead of pr_warningJoe Perches1-2/+1
At some point, pr_warning will be removed so all logging messages use a consistent <prefix>_warn style. Update arch/powerpc/ Miscellanea: o Coalesce formats o Realign arguments o Use %s, __func__ instead of embedded function names o Remove unnecessary line continuations Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Geoff Levand <geoff@infradead.org> [mpe: Rebase due to some %pOF changes.] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-10powerpc/8xx: Getting rid of remaining use of CONFIG_8xxChristophe Leroy1-1/+1
Two config options exist to define powerpc MPC8xx: * CONFIG_PPC_8xx * CONFIG_8xx arch/powerpc/platforms/Kconfig.cputype has contained the following comment about CONFIG_8xx item for some years: "# this is temp to handle compat with arch=ppc" arch/powerpc is now the only place with remaining use of CONFIG_8xx: get rid of them. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-07-18powerpc/mm: Mark __init memory no-execute when STRICT_KERNEL_RWX=yMichael Ellerman1-0/+1
Currently even with STRICT_KERNEL_RWX we leave the __init text marked executable after init, which is bad. Add a hook to mark it NX (no-execute) before we free it, and implement it for radix and hash. Note that we use __init_end as the end address, not _einittext, because overlaps_kernel_text() uses __init_end, because there are additional executable sections other than .init.text between __init_begin and __init_end. Tested on radix and hash with: 0:mon> p $__init_begin *** 400 exception occurred Fixes: 1e0fc9d1eb2b ("powerpc/Kconfig: Enable STRICT_KERNEL_RWX for some configs") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-07-07Merge tag 'powerpc-4.13-1' of ↵Linus Torvalds1-5/+15
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Highlights include: - Support for STRICT_KERNEL_RWX on 64-bit server CPUs. - Platform support for FSP2 (476fpe) board - Enable ZONE_DEVICE on 64-bit server CPUs. - Generic & powerpc spin loop primitives to optimise busy waiting - Convert VDSO update function to use new update_vsyscall() interface - Optimisations to hypercall/syscall/context-switch paths - Improvements to the CPU idle code on Power8 and Power9. As well as many other fixes and improvements. Thanks to: Akshay Adiga, Andrew Donnellan, Andrew Jeffery, Anshuman Khandual, Anton Blanchard, Balbir Singh, Benjamin Herrenschmidt, Christophe Leroy, Christophe Lombard, Colin Ian King, Dan Carpenter, Gautham R. Shenoy, Hari Bathini, Ian Munsie, Ivan Mikhaylov, Javier Martinez Canillas, Madhavan Srinivasan, Masahiro Yamada, Matt Brown, Michael Neuling, Michal Suchanek, Murilo Opsfelder Araujo, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Paul Mackerras, Pavel Machek, Russell Currey, Santosh Sivaraj, Stephen Rothwell, Thiago Jung Bauermann, Yang Li" * tag 'powerpc-4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (158 commits) powerpc/Kconfig: Enable STRICT_KERNEL_RWX for some configs powerpc/mm/radix: Implement STRICT_RWX/mark_rodata_ro() for Radix powerpc/mm/hash: Implement mark_rodata_ro() for hash powerpc/vmlinux.lds: Align __init_begin to 16M powerpc/lib/code-patching: Use alternate map for patch_instruction() powerpc/xmon: Add patch_instruction() support for xmon powerpc/kprobes/optprobes: Use patch_instruction() powerpc/kprobes: Move kprobes over to patch_instruction() powerpc/mm/radix: Fix execute permissions for interrupt_vectors powerpc/pseries: Fix passing of pp0 in updatepp() and updateboltedpp() powerpc/64s: Blacklist rtas entry/exit from kprobes powerpc/64s: Blacklist functions invoked on a trap powerpc/64s: Un-blacklist system_call() from kprobes powerpc/64s: Move system_call() symbol to just after setting MSR_EE powerpc/64s: Blacklist system_call() and system_call_common() from kprobes powerpc/64s: Convert .L__replay_interrupt_return to a local label powerpc64/elfv1: Only dereference function descriptor for non-text symbols cxl: Export library to support IBM XSL powerpc/dts: Use #include "..." to include local DT powerpc/perf/hv-24x7: Aggregate result elements on POWER9 SMT8 ...
2017-07-07mm, memory_hotplug: replace for_device by want_memblock in arch_add_memoryMichal Hocko1-2/+2
arch_add_memory gets for_device argument which then controls whether we want to create memblocks for created memory sections. Simplify the logic by telling whether we want memblocks directly rather than going through pointless negation. This also makes the api easier to understand because it is clear what we want rather than nothing telling for_device which can mean anything. This shouldn't introduce any functional change. Link: http://lkml.kernel.org/r/20170515085827.16474-13-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Daniel Kiper <daniel.kiper@oracle.com> Cc: David Rientjes <rientjes@google.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Joonsoo Kim <js1304@gmail.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Reza Arbab <arbab@linux.vnet.ibm.com> Cc: Tobias Regnery <tobias.regnery@gmail.com> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-07mm, memory_hotplug: do not associate hotadded memory to zones until onlineMichal Hocko1-9/+1
The current memory hotplug implementation relies on having all the struct pages associate with a zone/node during the physical hotplug phase (arch_add_memory->__add_pages->__add_section->__add_zone). In the vast majority of cases this means that they are added to ZONE_NORMAL. This has been so since 9d99aaa31f59 ("[PATCH] x86_64: Support memory hotadd without sparsemem") and it wasn't a big deal back then because movable onlining didn't exist yet. Much later memory hotplug wanted to (ab)use ZONE_MOVABLE for movable onlining 511c2aba8f07 ("mm, memory-hotplug: dynamic configure movable memory and portion memory") and then things got more complicated. Rather than reconsidering the zone association which was no longer needed (because the memory hotplug already depended on SPARSEMEM) a convoluted semantic of zone shifting has been developed. Only the currently last memblock or the one adjacent to the zone_movable can be onlined movable. This essentially means that the online type changes as the new memblocks are added. Let's simulate memory hot online manually $ echo 0x100000000 > /sys/devices/system/memory/probe $ grep . /sys/devices/system/memory/memory32/valid_zones Normal Movable $ echo $((0x100000000+(128<<20))) > /sys/devices/system/memory/probe $ grep . /sys/devices/system/memory/memory3?/valid_zones /sys/devices/system/memory/memory32/valid_zones:Normal /sys/devices/system/memory/memory33/valid_zones:Normal Movable $ echo $((0x100000000+2*(128<<20))) > /sys/devices/system/memory/probe $ grep . /sys/devices/system/memory/memory3?/valid_zones /sys/devices/system/memory/memory32/valid_zones:Normal /sys/devices/system/memory/memory33/valid_zones:Normal /sys/devices/system/memory/memory34/valid_zones:Normal Movable $ echo online_movable > /sys/devices/system/memory/memory34/state $ grep . /sys/devices/system/memory/memory3?/valid_zones /sys/devices/system/memory/memory32/valid_zones:Normal /sys/devices/system/memory/memory33/valid_zones:Normal Movable /sys/devices/system/memory/memory34/valid_zones:Movable Normal This is an awkward semantic because an udev event is sent as soon as the block is onlined and an udev handler might want to online it based on some policy (e.g. association with a node) but it will inherently race with new blocks showing up. This patch changes the physical online phase to not associate pages with any zone at all. All the pages are just marked reserved and wait for the onlining phase to be associated with the zone as per the online request. There are only two requirements - existing ZONE_NORMAL and ZONE_MOVABLE cannot overlap - ZONE_NORMAL precedes ZONE_MOVABLE in physical addresses the latter one is not an inherent requirement and can be changed in the future. It preserves the current behavior and made the code slightly simpler. This is subject to change in future. This means that the same physical online steps as above will lead to the following state: Normal Movable /sys/devices/system/memory/memory32/valid_zones:Normal Movable /sys/devices/system/memory/memory33/valid_zones:Normal Movable /sys/devices/system/memory/memory32/valid_zones:Normal Movable /sys/devices/system/memory/memory33/valid_zones:Normal Movable /sys/devices/system/memory/memory34/valid_zones:Normal Movable /sys/devices/system/memory/memory32/valid_zones:Normal Movable /sys/devices/system/memory/memory33/valid_zones:Normal Movable /sys/devices/system/memory/memory34/valid_zones:Movable Implementation: The current move_pfn_range is reimplemented to check the above requirements (allow_online_pfn_range) and then updates the respective zone (move_pfn_range_to_zone), the pgdat and links all the pages in the pfn range with the zone/node. __add_pages is updated to not require the zone and only initializes sections in the range. This allowed to simplify the arch_add_memory code (s390 could get rid of quite some of code). devm_memremap_pages is the only user of arch_add_memory which relies on the zone association because it only hooks into the memory hotplug only half way. It uses it to associate the new memory with ZONE_DEVICE but doesn't allow it to be {on,off}lined via sysfs. This means that this particular code path has to call move_pfn_range_to_zone explicitly. The original zone shifting code is kept in place and will be removed in the follow up patch for an easier review. Please note that this patch also changes the original behavior when offlining a memory block adjacent to another zone (Normal vs. Movable) used to allow to change its movable type. This will be handled later. [richard.weiyang@gmail.com: simplify zone_intersects()] Link: http://lkml.kernel.org/r/20170616092335.5177-1-richard.weiyang@gmail.com [richard.weiyang@gmail.com: remove duplicate call for set_page_links] Link: http://lkml.kernel.org/r/20170616092335.5177-2-richard.weiyang@gmail.com [akpm@linux-foundation.org: remove unused local `i'] Link: http://lkml.kernel.org/r/20170515085827.16474-12-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Reza Arbab <arbab@linux.vnet.ibm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> # For s390 bits Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Daniel Kiper <daniel.kiper@oracle.com> Cc: David Rientjes <rientjes@google.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Joonsoo Kim <js1304@gmail.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Tobias Regnery <tobias.regnery@gmail.com> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-07mm, memory_hotplug: get rid of is_zone_device_sectionMichal Hocko1-1/+1
Device memory hotplug hooks into regular memory hotplug only half way. It needs memory sections to track struct pages but there is no need/desire to associate those sections with memory blocks and export them to the userspace via sysfs because they cannot be onlined anyway. This is currently expressed by for_device argument to arch_add_memory which then makes sure to associate the given memory range with ZONE_DEVICE. register_new_memory then relies on is_zone_device_section to distinguish special memory hotplug from the regular one. While this works now, later patches in this series want to move __add_zone outside of arch_add_memory path so we have to come up with something else. Add want_memblock down the __add_pages path and use it to control whether the section->memblock association should be done. arch_add_memory then just trivially want memblock for everything but for_device hotplug. remove_memory_section doesn't need is_zone_device_section either. We can simply skip all the memblock specific cleanup if there is no memblock for the given section. This shouldn't introduce any functional change. Link: http://lkml.kernel.org/r/20170515085827.16474-5-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Daniel Kiper <daniel.kiper@oracle.com> Cc: David Rientjes <rientjes@google.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Joonsoo Kim <js1304@gmail.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Reza Arbab <arbab@linux.vnet.ibm.com> Cc: Tobias Regnery <tobias.regnery@gmail.com> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-02powerpc/vmemmap: Add altmap supportOliver O'Halloran1-3/+13
Adds support to powerpc for the altmap feature of ZONE_DEVICE memory. An altmap is a driver provided region that is used to provide the backing storage for the struct pages of ZONE_DEVICE memory. In situations where large amount of ZONE_DEVICE memory is being added to the system the altmap reduces pressure on main system memory by allowing the mm/ metadata to be stored on the device itself rather in main memory. Reviewed-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-06-05powerpc/mm: Rename map_page() to map_kernel_page() on 32-bitChristophe Leroy1-2/+2
These two functions implement the same semantics, so unify their naming so we can share code that calls them. The longer name is more descriptive so use it. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Acked-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-10powerpc/pseries: Automatically resize HPT for memory hot add/removeDavid Gibson1-0/+4
We've now implemented code in the pseries platform to use the new PAPR interface to allow resizing the hash page table (HPT) at runtime. This patch uses that interface to automatically attempt to resize the HPT when memory is hot added or removed. This tries to always keep the HPT at a reasonable size for our current memory size. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-07powerpc: Fix build with CONFIG_MEMORY_HOTPLUG on some configsBenjamin Herrenschmidt1-0/+10
For memory hotplug to work, the MMU code needs to provide the functions create_section_mapping() and remove_section_mapping() to respectively map and unmap portions of the linear mapping. At the moment only hash64 provides these, so we provide weak stubs that just error out. This fixes the build with configurations such as 64-bit BookE with CONFIG_MEMORY_HOTPLUG enabled. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-06-16powerpc/mm: Ensure "special" zones are emptyOliver O'Halloran1-1/+7
The mm zone mechanism was traditionally used by arch specific code to partition memory into allocation zones. However there are several zones that are managed by the mm subsystem rather than the architecture. Most architectures set the max PFN of these special zones to zero, however on powerpc we set them to ~0ul. This, in conjunction with a bug in free_area_init_nodes() results in all of system memory being placed in ZONE_DEVICE when enabled. Device memory cannot be used for regular kernel memory allocations so this will cause a kernel panic at boot. Given the planned addition of more mm managed zones (ZONE_CMA) we should aim to be consistent with every other architecture and set the max PFN for these zones to zero. Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Reviewed-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-11powerpc/mm: Improve readability of update_mmu_cache()Gavin Shan1-7/+14
The function is used to update the MMU with software PTE. It can be called by data access exception handler (0x300) or instruction access exception handler (0x400). If the function is called by 0x400 handler, the local variable @access is set to _PAGE_EXEC to indicate the software PTE should have that flag set. When the function is called by 0x300 handler, @access is set to zero. This improves the readability of the function by replacing if statements with switch. No logical changes introduced. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-11powerpc/mm: define TOP_ZONE as a constantOliver O'Halloran1-12/+5
The zone that contains the top of memory will be either ZONE_NORMAL or ZONE_HIGHMEM depending on the kernel config. There are two functions that require this information and both of them use an #ifdef to set a local variable (top_zone). This is a little silly so lets just make it a constant. Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Cc: linux-mm@kvack.org Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-11powerpc/radix: Update MMU cacheAneesh Kumar K.V1-0/+2
With radix there is no MMU cache. Hence we don't need to do anything in update_mmu_cache(). Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-03-20Merge tag 'powerpc-4.6-1' of ↵Linus Torvalds1-2/+8
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "This was delayed a day or two by some build-breakage on old toolchains which we've now fixed. There's two PCI commits both acked by Bjorn. There's one commit to mm/hugepage.c which is (co)authored by Kirill. Highlights: - Restructure Linux PTE on Book3S/64 to Radix format from Paul Mackerras - Book3s 64 MMU cleanup in preparation for Radix MMU from Aneesh Kumar K.V - Add POWER9 cputable entry from Michael Neuling - FPU/Altivec/VSX save/restore optimisations from Cyril Bur - Add support for new ftrace ABI on ppc64le from Torsten Duwe Various cleanups & minor fixes from: - Adam Buchbinder, Andrew Donnellan, Balbir Singh, Christophe Leroy, Cyril Bur, Luis Henriques, Madhavan Srinivasan, Pan Xinhui, Russell Currey, Sukadev Bhattiprolu, Suraj Jitindar Singh. General: - atomics: Allow architectures to define their own __atomic_op_* helpers from Boqun Feng - Implement atomic{, 64}_*_return_* variants and acquire/release/ relaxed variants for (cmp)xchg from Boqun Feng - Add powernv_defconfig from Jeremy Kerr - Fix BUG_ON() reporting in real mode from Balbir Singh - Add xmon command to dump OPAL msglog from Andrew Donnellan - Add xmon command to dump process/task similar to ps(1) from Douglas Miller - Clean up memory hotplug failure paths from David Gibson pci/eeh: - Redesign SR-IOV on PowerNV to give absolute isolation between VFs from Wei Yang. - EEH Support for SRIOV VFs from Wei Yang and Gavin Shan. - PCI/IOV: Rename and export virtfn_{add, remove} from Wei Yang - PCI: Add pcibios_bus_add_device() weak function from Wei Yang - MAINTAINERS: Update EEH details and maintainership from Russell Currey cxl: - Support added to the CXL driver for running on both bare-metal and hypervisor systems, from Christophe Lombard and Frederic Barrat. - Ignore probes for virtual afu pci devices from Vaibhav Jain perf: - Export Power8 generic and cache events to sysfs from Sukadev Bhattiprolu - hv-24x7: Fix usage with chip events, display change in counter values, display domain indices in sysfs, eliminate domain suffix in event names, from Sukadev Bhattiprolu Freescale: - Updates from Scott: "Highlights include 8xx optimizations, 32-bit checksum optimizations, 86xx consolidation, e5500/e6500 cpu hotplug, more fman and other dt bits, and minor fixes/cleanup" * tag 'powerpc-4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (179 commits) powerpc: Fix unrecoverable SLB miss during restore_math() powerpc/8xx: Fix do_mtspr_cpu6() build on older compilers powerpc/rcpm: Fix build break when SMP=n powerpc/book3e-64: Use hardcoded mttmr opcode powerpc/fsl/dts: Add "jedec,spi-nor" flash compatible powerpc/T104xRDB: add tdm riser card node to device tree powerpc32: PAGE_EXEC required for inittext powerpc/mpc85xx: Add pcsphy nodes to FManV3 device tree powerpc/mpc85xx: Add MDIO bus muxing support to the board device tree(s) powerpc/86xx: Introduce and use common dtsi powerpc/86xx: Update device tree powerpc/86xx: Move dts files to fsl directory powerpc/86xx: Switch to kconfig fragments approach powerpc/86xx: Update defconfigs powerpc/86xx: Consolidate common platform code powerpc32: Remove one insn in mulhdu powerpc32: small optimisation in flush_icache_range() powerpc: Simplify test in __dma_sync() powerpc32: move xxxxx_dcache_range() functions inline powerpc32: Remove clear_pages() and define clear_page() inline ...
2016-03-01powerpc/mm: Clean up memory hotplug failure pathsDavid Gibson1-2/+8
This makes a number of cleanups to handling of mapping failures during memory hotplug on Power: For errors creating the linear mapping for the hot-added region: * This is now reported with EFAULT which is more appropriate than the previous EINVAL (the failure is unlikely to be related to the function's parameters) * An error in this path now prints a warning message, rather than just silently failing to add the extra memory. * Previously a failure here could result in the region being partially mapped. We now clean up any partial mapping before failing. For errors creating the vmemmap for the hot-added region: * This is now reported with EFAULT instead of causing a BUG() - this could happen for external reason (e.g. full hash table) so it's better to handle this non-fatally * An error message is also printed, so the failure won't be silent * As above a failure could cause a partially mapped region, we now clean this up. [mpe: move htab_remove_mapping() out of #ifdef CONFIG_MEMORY_HOTPLUG to enable this] Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Paul Mackerras <paulus@samba.org> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-01-30arch: Set IORESOURCE_SYSTEM_RAM flag for System RAMToshi Kani1-1/+1
Set IORESOURCE_SYSTEM_RAM in flags of resource ranges with "System RAM", "Kernel code", "Kernel data", and "Kernel bss". Note that: - IORESOURCE_SYSRAM (i.e. modifier bit) is set in flags when IORESOURCE_MEM is already set. IORESOURCE_SYSTEM_RAM is defined as (IORESOURCE_MEM|IORESOURCE_SYSRAM). - Some archs do not set 'flags' for children nodes, such as "Kernel code". This patch does not change 'flags' in this case. Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: linux-arch@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mips@linux-mips.org Cc: linux-mm <linux-mm@kvack.org> Cc: linux-parisc@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: linux-sh@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: sparclinux@vger.kernel.org Link: http://lkml.kernel.org/r/1453841853-11383-7-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-01-25powerpc/mm: Allow user space to map rtas_rmo_bufVasant Hegde1-2/+2
With commit 90a545e9 (restrict /dev/mem to idle io memory ranges) mapping rtas_rmo_buf from user space is failing. Hence we are not able to make RTAS syscall. This patch calls page_is_rtas_user_buf before calling iomem_is_exclusive in devmem_is_allowed(). This will allow user space to map rtas_rmo_buf and we are able to make RTAS syscall. Reported-by: Bharata B Rao <bharata@linux.vnet.ibm.com> CC: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-09-09Merge tag 'libnvdimm-for-4.3' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: "This update has successfully completed a 0day-kbuild run and has appeared in a linux-next release. The changes outside of the typical drivers/nvdimm/ and drivers/acpi/nfit.[ch] paths are related to the removal of IORESOURCE_CACHEABLE, the introduction of memremap(), and the introduction of ZONE_DEVICE + devm_memremap_pages(). Summary: - Introduce ZONE_DEVICE and devm_memremap_pages() as a generic mechanism for adding device-driver-discovered memory regions to the kernel's direct map. This facility is used by the pmem driver to enable pfn_to_page() operations on the page frames returned by DAX ('direct_access' in 'struct block_device_operations'). For now, the 'memmap' allocation for these "device" pages comes from "System RAM". Support for allocating the memmap from device memory will arrive in a later kernel. - Introduce memremap() to replace usages of ioremap_cache() and ioremap_wt(). memremap() drops the __iomem annotation for these mappings to memory that do not have i/o side effects. The replacement of ioremap_cache() with memremap() is limited to the pmem driver to ease merging the api change in v4.3. Completion of the conversion is targeted for v4.4. - Similar to the usage of memcpy_to_pmem() + wmb_pmem() in the pmem driver, update the VFS DAX implementation and PMEM api to provide persistence guarantees for kernel operations on a DAX mapping. - Convert the ACPI NFIT 'BLK' driver to map the block apertures as cacheable to improve performance. - Miscellaneous updates and fixes to libnvdimm including support for issuing "address range scrub" commands, clarifying the optimal 'sector size' of pmem devices, a clarification of the usage of the ACPI '_STA' (status) property for DIMM devices, and other minor fixes" * tag 'libnvdimm-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (34 commits) libnvdimm, pmem: direct map legacy pmem by default libnvdimm, pmem: 'struct page' for pmem libnvdimm, pfn: 'struct page' provider infrastructure x86, pmem: clarify that ARCH_HAS_PMEM_API implies PMEM mapped WB add devm_memremap_pages mm: ZONE_DEVICE for "device memory" mm: move __phys_to_pfn and __pfn_to_phys to asm/generic/memory_model.h dax: drop size parameter to ->direct_access() nd_blk: change aperture mapping from WC to WB nvdimm: change to use generic kvfree() pmem, dax: have direct_access use __pmem annotation dax: update I/O path to do proper PMEM flushing pmem: add copy_from_iter_pmem() and clear_pmem() pmem, x86: clean up conditional pmem includes pmem: remove layer when calling arch_has_wmb_pmem() pmem, x86: move x86 PMEM API to new pmem.h header libnvdimm, e820: make CONFIG_X86_PMEM_LEGACY a tristate option pmem: switch to devm_ allocations devres: add devm_memremap libnvdimm, btt: write and validate parent_uuid ...
2015-08-28mm: ZONE_DEVICE for "device memory"Dan Williams1-2/+2
While pmem is usable as a block device or via DAX mappings to userspace there are several usage scenarios that can not target pmem due to its lack of struct page coverage. In preparation for "hot plugging" pmem into the vmemmap add ZONE_DEVICE as a new zone to tag these pages separately from the ones that are subject to standard page allocations. Importantly "device memory" can be removed at will by userspace unbinding the driver of the device. Having a separate zone prevents allocation and otherwise marks these pages that are distinct from typical uniform memory. Device memory has different lifetime and performance characteristics than RAM. However, since we have run out of ZONES_SHIFT bits this functionality currently depends on sacrificing ZONE_DMA. Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Jerome Glisse <j.glisse@gmail.com> [hch: various simplifications in the arch interface] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-08-08powerpc/mm: Don't call __flush_dcache_icache_phys() with PA>VAScott Wood1-7/+7
__flush_dcache_icache_phys() requires the ability to access the memory with the MMU disabled, which means that on a 32-bit system any memory above 4 GiB is inaccessible. In particular, mpc86xx is 32-bit and can have more than 4 GiB of RAM. Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-06-03powerpc/mm: Use PFN_PHYS() in devmem_is_allowed()Scott Wood1-1/+1
This function can run on systems where physical addresses don't fit in unsigned long, so make sure to use the macro that contains the proper cast. Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-04-10powerpc: Replace mem_init_done with slab_is_available()Michael Ellerman1-3/+0
We have a powerpc specific global called mem_init_done which is "set on boot once kmalloc can be called". But that's not *quite* true. We set it at the bottom of mem_init(), and rely on the fact that mm_init() calls kmem_cache_init() immediately after that, and nothing is running in parallel. So replace it with the generic and 100% correct slab_is_available(). Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-11-10powerpc: Move sparse_init() into initmem_initAnton Blanchard1-0/+1
We did part of sparse initialisation in setup_arch and part in initmem_init. Put them together. Signed-off-by: Anton Blanchard <anton@samba.org> Tested-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-11-10powerpc: Remove bootmem allocatorAnton Blanchard1-60/+2
At the moment we transition from the memblock alloctor to the bootmem allocator. Gitting rid of the bootmem allocator removes a bunch of complicated code (most of which I owe the dubious honour of being responsible for writing). Signed-off-by: Anton Blanchard <anton@samba.org> Tested-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-11-05powerpc: Remove ppc_md.remove_memoryAnton Blanchard1-2/+12
We have an extra level of indirection on memory hot remove which is not matched on memory hot add. Memory hotplug is book3s only, so there is no need for it. This also enables means remove_memory() (ie memory hot unplug) works on powernv. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-19 17:25:08 +0300