summaryrefslogtreecommitdiff
path: root/arch/powerpc/Makefile
AgeCommit message (Collapse)AuthorFilesLines
2019-02-23powerpc/32: Remove CURRENT_THREAD_INFO and rename TI_CPUChristophe Leroy1-1/+1
Now that thread_info is similar to task_struct, its address is in r2 so CURRENT_THREAD_INFO() macro is useless. This patch removes it. This patch also moves the 'tovirt(r2, r2)' down just before the reactivation of MMU translation, so that we keep the physical address of 'current' in r2 until then. It avoids a few calls to tophys(). At the same time, as the 'cpu' field is not anymore in thread_info, TI_CPU is renamed TASK_CPU by this patch. It also allows to get rid of a couple of '#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE' as ACCOUNT_CPU_USER_ENTRY() and ACCOUNT_CPU_USER_EXIT() are empty when CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not defined. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> [mpe: Fix a missed conversion of TI_CPU idle_6xx.S] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-02-23powerpc: Activate CONFIG_THREAD_INFO_IN_TASKChristophe Leroy1-0/+7
This patch activates CONFIG_THREAD_INFO_IN_TASK which moves the thread_info into task_struct. Moving thread_info into task_struct has the following advantages: - It protects thread_info from corruption in the case of stack overflows. - Its address is harder to determine if stack addresses are leaked, making a number of attacks more difficult. This has the following consequences: - thread_info is now located at the beginning of task_struct. - The 'cpu' field is now in task_struct, and only exists when CONFIG_SMP is active. - thread_info doesn't have anymore the 'task' field. This patch: - Removes all recopy of thread_info struct when the stack changes. - Changes the CURRENT_THREAD_INFO() macro to point to current. - Selects CONFIG_THREAD_INFO_IN_TASK. - Modifies raw_smp_processor_id() to get ->cpu from current without including linux/sched.h to avoid circular inclusion and without including asm/asm-offsets.h to avoid symbol names duplication between ASM constants and C constants. - Modifies klp_init_thread_info() to take a task_struct pointer argument. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Add task_stack.h to livepatch.h to fix build fails] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-01-14powerpc: remove redundant header search path additionsMasahiro Yamada1-2/+2
The same path -Iarch/$(ARCH) is passed to KBUILD_CPPFLAGS, KBUILD_AFLAGS, and KBUILD_CFLAGS. As you see in scripts/Makefile.lib, KBUILD_CPPFLAGS is passed to c_flags and a_flags as well. Passing it to KBUILD_CPPFLAGS is enough. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-27Merge tag 'powerpc-4.21-1' of ↵Linus Torvalds1-5/+23
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Notable changes: - Mitigations for Spectre v2 on some Freescale (NXP) CPUs. - A large series adding support for pass-through of Nvidia V100 GPUs to guests on Power9. - Another large series to enable hardware assistance for TLB table walk on MPC8xx CPUs. - Some preparatory changes to our DMA code, to make way for further cleanups from Christoph. - Several fixes for our Transactional Memory handling discovered by fuzzing the signal return path. - Support for generating our system call table(s) from a text file like other architectures. - A fix to our page fault handler so that instead of generating a WARN_ON_ONCE, user accesses of kernel addresses instead print a ratelimited and appropriately scary warning. - A cosmetic change to make our unhandled page fault messages more similar to other arches and also more compact and informative. - Freescale updates from Scott: "Highlights include elimination of legacy clock bindings use from dts files, an 83xx watchdog handler, fixes to old dts interrupt errors, and some minor cleanup." And many clean-ups, reworks and minor fixes etc. Thanks to: Alexandre Belloni, Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Benjamin Herrenschmidt, Breno Leitao, Christian Lamparter, Christophe Leroy, Christoph Hellwig, Daniel Axtens, Darren Stevens, David Gibson, Diana Craciun, Dmitry V. Levin, Firoz Khan, Geert Uytterhoeven, Greg Kurz, Gustavo Romero, Hari Bathini, Joel Stanley, Kees Cook, Madhavan Srinivasan, Mahesh Salgaonkar, Markus Elfring, Mathieu Malaterre, Michal Suchánek, Naveen N. Rao, Nick Desaulniers, Oliver O'Halloran, Paul Mackerras, Ram Pai, Ravi Bangoria, Rob Herring, Russell Currey, Sabyasachi Gupta, Sam Bobroff, Satheesh Rajendran, Scott Wood, Segher Boessenkool, Stephen Rothwell, Tang Yuantian, Thiago Jung Bauermann, Yangtao Li, Yuantian Tang, Yue Haibing" * tag 'powerpc-4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (201 commits) Revert "powerpc/fsl_pci: simplify fsl_pci_dma_set_mask" powerpc/zImage: Also check for stdout-path powerpc: Fix HMIs on big-endian with CONFIG_RELOCATABLE=y macintosh: Use of_node_name_{eq, prefix} for node name comparisons ide: Use of_node_name_eq for node name comparisons powerpc: Use of_node_name_eq for node name comparisons powerpc/pseries/pmem: Convert to %pOFn instead of device_node.name powerpc/mm: Remove very old comment in hash-4k.h powerpc/pseries: Fix node leak in update_lmb_associativity_index() powerpc/configs/85xx: Enable CONFIG_DEBUG_KERNEL powerpc/dts/fsl: Fix dtc-flagged interrupt errors clk: qoriq: add more compatibles strings powerpc/fsl: Use new clockgen binding powerpc/83xx: handle machine check caused by watchdog timer powerpc/fsl-rio: fix spelling mistake "reserverd" -> "reserved" powerpc/fsl_pci: simplify fsl_pci_dma_set_mask arch/powerpc/fsl_rmu: Use dma_zalloc_coherent vfio_pci: Add NVIDIA GV100GL [Tesla V100 SXM2] subdriver vfio_pci: Allow regions to add own capabilities vfio_pci: Allow mapping extra regions ...
2018-12-21powerpc: generate uapi header and system call table filesFiroz Khan1-0/+3
System call table generation script must be run to gener- ate unistd_32/64.h and syscall_table_32/64/c32/spu.h files. This patch will have changes which will invokes the script. This patch will generate unistd_32/64.h and syscall_table- _32/64/c32/spu.h files by the syscall table generation script invoked by parisc/Makefile and the generated files against the removed files must be identical. The generated uapi header file will be included in uapi/- asm/unistd.h and generated system call table header file will be included by kernel/systbl.S file. Signed-off-by: Firoz Khan <firoz.khan@linaro.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-20powerpc/32: Avoid unsupported flags with clangJoel Stanley1-1/+8
When building for ppc32 with clang these flags are unsupported: -ffixed-r2 and -mmultiple llvm's lib/Target/PowerPC/PPCRegisterInfo.cpp marks r2 as reserved on when building for SVR4ABI and !ppc64: // The SVR4 ABI reserves r2 and r13 if (Subtarget.isSVR4ABI()) { // We only reserve r2 if we need to use the TOC pointer. If we have no // explicit uses of the TOC pointer (meaning we're a leaf function with // no constant-pool loads, etc.) and we have no potential uses inside an // inline asm block, then we can treat r2 has an ordinary callee-saved // register. const PPCFunctionInfo *FuncInfo = MF.getInfo<PPCFunctionInfo>(); if (!TM.isPPC64() || FuncInfo->usesTOCBasePtr() || MF.hasInlineAsm()) markSuperRegs(Reserved, PPC::R2); // System-reserved register markSuperRegs(Reserved, PPC::R13); // Small Data Area pointer register } This means we can safely omit -ffixed-r2 when building for 32-bit targets. The -mmultiple/-mno-multiple flags are not supported by clang, so platforms that might support multiple miss out on using multiple word instructions. We wrap these flags in cc-option so that when Clang gains support the kernel will be able use these flags. Clang 8 can then build a ppc44x_defconfig which boots in Qemu: make CC=clang-8 ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- ppc44x_defconfig ./scripts/config -e CONFIG_DEVTMPFS -d DEVTMPFS_MOUNT make CC=clang-8 ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- qemu-system-ppc -M bamboo \ -kernel arch/powerpc/boot/zImage \ -dtb arch/powerpc/boot/dts/bamboo.dtb \ -initrd ~/ppc32-440-rootfs.cpio \ -nographic -serial stdio -monitor pty -append "console=ttyS0" Link: https://github.com/ClangBuiltLinux/linux/issues/261 Link: https://bugs.llvm.org/show_bug.cgi?id=39556 Link: https://bugs.llvm.org/show_bug.cgi?id=39555 Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-17powerpc/32: Move the old 6xx -mcpu logic before the TARGET_CPU logicMathieu Malaterre1-4/+4
The code: ifdef CONFIG_6xx KBUILD_CFLAGS += -mcpu=powerpc endif was added in 2006 in commit f48b8296b315 ("[PATCH] powerpc32: Set cpu explicitly in kernel compiles"). This change was acceptable since the TARGET_CPU logic was 64-bit only. Since commit 0e00a8c9fd92 ("powerpc: Allow CPU selection also on PPC32") this logic is no longer acceptable after the TARGET_CPU specific. It currently appends -mcpu=powerpc at the end of the command line, after any TARGET_CPU specific: gcc -Wp,-MD,init/.do_mounts.o.d ... -mcpu=powerpc -mbig-endian -m32 ... -mcpu=e300c2 ... -mcpu=powerpc ... ../init/do_mounts.c Fixes: 0e00a8c9fd92 ("powerpc: Allow CPU selection also on PPC32") Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-09x86, powerpc: Remove -funit-at-a-time compiler option entirelyMasahiro Yamada1-4/+0
GCC 4.6 manual says: -funit-at-a-time This option is left for compatibility reasons. -funit-at-a-time has no effect, while -fno-unit-at-a-time implies -fno-toplevel-reorder and -fno-section-anchors. Enabled by default. Remove it. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Richard Weinberger <richard@sigma-star.at> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linuxppc-dev@lists.ozlabs.org Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/1541990120-9643-3-git-send-email-yamada.masahiro@socionext.com
2018-11-26powerpc: change CONFIG_6xx to CONFIG_PPC_BOOK3S_32Christophe Leroy1-1/+1
Today we have: config PPC_BOOK3S_32 bool "512x/52xx/6xx/7xx/74xx/82xx/83xx/86xx" [depends on PPC32 within a choice] config PPC_BOOK3S def_bool y depends on PPC_BOOK3S_32 || PPC_BOOK3S_64 config 6xx def_bool y depends on PPC32 && PPC_BOOK3S 6xx is therefore redundant with PPC_BOOK3S_32. In order to make the code clearer, lets use preferably PPC_BOOK3S_32. This will allow to remove CONFIG_6xx in a later patch. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-11-26powerpc/configs: Add KVM guest defconfigSatheesh Rajendran1-0/+8
This patch adds new defconfig options for powerpc KVM guest and guest.config with additional config symbols enabled, which is to build kernel to boot without initramfs and can be used as place holder for guest specific additional config symbols in future. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-11-02kbuild: replace cc-name test with CONFIG_CC_IS_CLANGMasahiro Yamada1-2/+2
Evaluating cc-name invokes the compiler every time even when you are not compiling anything, like 'make help'. This is not efficient. The compiler type has been already detected in the Kconfig stage. Use CONFIG_CC_IS_CLANG, instead. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Acked-by: Paul Burton <paul.burton@mips.com> (MIPS) Acked-by: Joel Stanley <joel@jms.id.au>
2018-10-27Merge tag 'powerpc-4.20-1' of ↵Linus Torvalds1-55/+36
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Notable changes: - A large series to rewrite our SLB miss handling, replacing a lot of fairly complicated asm with much fewer lines of C. - Following on from that, we now maintain a cache of SLB entries for each process and preload them on context switch. Leading to a 27% speedup for our context switch benchmark on Power9. - Improvements to our handling of SLB multi-hit errors. We now print more debug information when they occur, and try to continue running by flushing the SLB and reloading, rather than treating them as fatal. - Enable THP migration on 64-bit Book3S machines (eg. Power7/8/9). - Add support for physical memory up to 2PB in the linear mapping on 64-bit Book3S. We only support up to 512TB as regular system memory, otherwise the percpu allocator runs out of vmalloc space. - Add stack protector support for 32 and 64-bit, with a per-task canary. - Add support for PTRACE_SYSEMU and PTRACE_SYSEMU_SINGLESTEP. - Support recognising "big cores" on Power9, where two SMT4 cores are presented to us as a single SMT8 core. - A large series to cleanup some of our ioremap handling and PTE flags. - Add a driver for the PAPR SCM (storage class memory) interface, allowing guests to operate on SCM devices (acked by Dan). - Changes to our ftrace code to handle very large kernels, where we need to use a trampoline to get to ftrace_caller(). And many other smaller enhancements and cleanups. Thanks to: Alan Modra, Alistair Popple, Aneesh Kumar K.V, Anton Blanchard, Aravinda Prasad, Bartlomiej Zolnierkiewicz, Benjamin Herrenschmidt, Breno Leitao, Cédric Le Goater, Christophe Leroy, Christophe Lombard, Dan Carpenter, Daniel Axtens, Finn Thain, Gautham R. Shenoy, Gustavo Romero, Haren Myneni, Hari Bathini, Jia Hongtao, Joel Stanley, John Allen, Laurent Dufour, Madhavan Srinivasan, Mahesh Salgaonkar, Mark Hairgrove, Masahiro Yamada, Michael Bringmann, Michael Neuling, Michal Suchanek, Murilo Opsfelder Araujo, Nathan Fontenot, Naveen N. Rao, Nicholas Piggin, Nick Desaulniers, Oliver O'Halloran, Paul Mackerras, Petr Vorel, Rashmica Gupta, Reza Arbab, Rob Herring, Sam Bobroff, Samuel Mendoza-Jonas, Scott Wood, Stan Johnson, Stephen Rothwell, Stewart Smith, Suraj Jitindar Singh, Tyrel Datwyler, Vaibhav Jain, Vasant Hegde, YueHaibing, zhong jiang" * tag 'powerpc-4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (221 commits) Revert "selftests/powerpc: Fix out-of-tree build errors" powerpc/msi: Fix compile error on mpc83xx powerpc: Fix stack protector crashes on CPU hotplug powerpc/traps: restore recoverability of machine_check interrupts powerpc/64/module: REL32 relocation range check powerpc/64s/radix: Fix radix__flush_tlb_collapsed_pmd double flushing pmd selftests/powerpc: Add a test of wild bctr powerpc/mm: Fix page table dump to work on Radix powerpc/mm/radix: Display if mappings are exec or not powerpc/mm/radix: Simplify split mapping logic powerpc/mm/radix: Remove the retry in the split mapping logic powerpc/mm/radix: Fix small page at boundary when splitting powerpc/mm/radix: Fix overuse of small pages in splitting logic powerpc/mm/radix: Fix off-by-one in split mapping logic powerpc/ftrace: Handle large kernel configs powerpc/mm: Fix WARN_ON with THP NUMA migration selftests/powerpc: Fix out-of-tree build errors powerpc/time: no steal_time when CONFIG_PPC_SPLPAR is not selected powerpc/time: Only set CONFIG_ARCH_HAS_SCALED_CPUTIME on PPC64 powerpc/time: isolate scaled cputime accounting in dedicated functions. ...
2018-10-18powerpc: Move core kernel logic into arch/powerpc/KbuildMichael Ellerman1-12/+2
This is a nice cleanup, arch/powerpc/Makefile is long and messy so moving this out helps a little. It also allows us to do: $ make arch/powerpc Which can be helpful if you just want to compile test some changes to arch code and not link everything. Finally it also gives us a single place to do subdir-cc-flags assignments which affect the whole of arch/powerpc, which we will do in a future patch. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-13powerpc/Makefile: Fix PPC_BOOK3S_64 ASFLAGSJoel Stanley1-1/+5
Ever since commit 15a3204d24a3 ("powerpc/64s: Set assembler machine type to POWER4") we force -mpower4 to be passed to the assembler irrespective of the CFLAGS used (for Book3s 64). When building a powerpc64 kernel with clang, clang will not add -many to the assembler flags, so any instructions that the compiler has generated that are not available on power4 will cause an error: /usr/bin/as -a64 -mppc64 -mlittle-endian -mpower8 \ -I ./arch/powerpc/include -I ./arch/powerpc/include/generated \ -I ./include -I ./arch/powerpc/include/uapi \ -I ./arch/powerpc/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi -I arch/powerpc -I arch/powerpc \ -maltivec -mpower4 -o init/do_mounts.o /tmp/do_mounts-3b0a3d.s /tmp/do_mounts-51ce54.s:748: Error: unrecognized opcode: `isel' GCC does include -many, so the GCC driven gas call will succeed: as -v -I ./arch/powerpc/include -I ./arch/powerpc/include/generated -I ./include -I ./arch/powerpc/include/uapi -I ./arch/powerpc/include/generated/uapi -I ./include/uapi -I ./include/generated/uapi -I arch/powerpc -I arch/powerpc -a64 -mpower8 -many -mlittle -maltivec -mpower4 -o init/do_mounts.o Note that isel is power7 and above for IBM CPUs. GCC only generates it for Power9 and above, but the above test was run against the clang generated assembly. Peter Bergner explains: When using -many -mpower4, gas will first try and find a matching power4 mnemonic and failing that, it will then allow any valid mnemonic that gas knows about. GCC's use of -many predates me though. IIRC, Alan looked at trying to remove it, but I forget why he didn't. Could be either a gcc or gas issue at the time. I'm not sure whether issue still exists or not. He and I have modified how gas works internally a fair amount since he tried removing gcc use of -many. I will also note that when using -many, gas will choose the first mnemonic that matches in the mnemonic table and we have (mostly) sorted the table so that server mnemonics show up earlier in the table than other mnemonics, so they'll be seen/chosen first. By explicitly setting -many we can build with Clang and GCC while retaining the -mpower4 option. Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-04powerpc: remove leftover code of old GCC version checksMasahiro Yamada1-8/+0
Clean up the leftover of commit f2910f0e6835 ("powerpc: remove old GCC version checks"). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-03powerpc/64: add stack protector supportChristophe Leroy1-0/+8
On PPC64, as register r13 points to the paca_struct at all time, this patch adds a copy of the canary there, which is copied at task_switch. That new canary is then used by using the following GCC options: -mstack-protector-guard=tls -mstack-protector-guard-reg=r13 -mstack-protector-guard-offset=offsetof(struct paca_struct, canary)) Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-03powerpc/32: add stack protector supportChristophe Leroy1-0/+10
This functionality was tentatively added in the past (commit 6533b7c16ee5 ("powerpc: Initial stack protector (-fstack-protector) support")) but had to be reverted (commit f2574030b0e3 ("powerpc: Revert the initial stack protector support") because of GCC implementing it differently whether it had been built with libc support or not. Now, GCC offers the possibility to manually set the stack-protector mode (global or tls) regardless of libc support. This time, the patch selects HAVE_STACKPROTECTOR only if -mstack-protector-guard=tls is supported by GCC. On PPC32, as register r2 points to current task_struct at all time, the stack_canary located inside task_struct can be used directly by using the following GCC options: -mstack-protector-guard=tls -mstack-protector-guard-reg=r2 -mstack-protector-guard-offset=offsetof(struct task_struct, stack_canary)) The protector is disabled for prom_init and bootx_init as it is too early to handle it properly. $ echo CORRUPT_STACK > /sys/kernel/debug/provoke-crash/DIRECT [ 134.943666] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: lkdtm_CORRUPT_STACK+0x64/0x64 [ 134.943666] [ 134.955414] CPU: 0 PID: 283 Comm: sh Not tainted 4.18.0-s3k-dev-12143-ga3272be41209 #835 [ 134.963380] Call Trace: [ 134.965860] [c6615d60] [c001f76c] panic+0x118/0x260 (unreliable) [ 134.971775] [c6615dc0] [c001f654] panic+0x0/0x260 [ 134.976435] [c6615dd0] [c032c368] lkdtm_CORRUPT_STACK_STRONG+0x0/0x64 [ 134.982769] [c6615e00] [ffffffff] 0xffffffff Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-02kbuild: consolidate Devicetree dtb build rulesRob Herring1-3/+0
There is nothing arch specific about building dtb files other than their location under /arch/*/boot/dts/. Keeping each arch aligned is a pain. The dependencies and supported targets are all slightly different. Also, a cross-compiler for each arch is needed, but really the host compiler preprocessor is perfectly fine for building dtbs. Move the build rules to a common location and remove the arch specific ones. This is done in a single step to avoid warnings about overriding rules. The build dependencies had been a mixture of 'scripts' and/or 'prepare'. These pull in several dependencies some of which need a target compiler (specifically devicetable-offsets.h) and aren't needed to build dtbs. All that is really needed is dtc, so adjust the dependencies to only be dtc. This change enables support 'dtbs_install' on some arches which were missing the target. Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Paul Burton <paul.burton@mips.com> Acked-by: Ley Foon Tan <ley.foon.tan@intel.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Michal Marek <michal.lkml@markovi.net> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Michal Simek <monstr@monstr.eu> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: linux-kbuild@vger.kernel.org Cc: linux-snps-arc@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: uclinux-h8-devel@lists.sourceforge.jp Cc: linux-mips@linux-mips.org Cc: nios2-dev@lists.rocketboards.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-xtensa@linux-xtensa.org Signed-off-by: Rob Herring <robh@kernel.org>
2018-10-02powerpc: build .dtb files in dts directoryRob Herring1-1/+1
Align powerpc with other architectures which build the dtb files in the same directory as the dts files. This is also in line with most other build targets which are located in the same directory as the source. This move will help enable the 'dtbs' target which builds all the dtbs regardless of kernel config. This transition could break some scripts if they expect dtb files in the old location. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Rob Herring <robh@kernel.org>
2018-09-19powerpc: avoid -mno-sched-epilog on GCC 4.9 and newerNicholas Piggin1-2/+6
Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-09-19powerpc: consolidate -mno-sched-epilog into FTRACE flagsNicholas Piggin1-6/+6
Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-09-19powerpc: remove old GCC version checksNicholas Piggin1-29/+2
GCC 4.6 is the minimum supported now. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-08-24kbuild: rename LDFLAGS to KBUILD_LDFLAGSMasahiro Yamada1-3/+3
Commit a0f97e06a43c ("kbuild: enable 'make CFLAGS=...' to add additional options to CC") renamed CFLAGS to KBUILD_CFLAGS. Commit 222d394d30e7 ("kbuild: enable 'make AFLAGS=...' to add additional options to AS") renamed AFLAGS to KBUILD_AFLAGS. Commit 06c5040cdb13 ("kbuild: enable 'make CPPFLAGS=...' to add additional options to CPP") renamed CPPFLAGS to KBUILD_CPPFLAGS. For some reason, LDFLAGS was not renamed. Using a well-known variable like LDFLAGS may result in accidental override of the variable. Kbuild generally uses KBUILD_ prefixed variables for the internally appended options, so here is one more conversion to sanitize the naming convention. I did not touch Makefiles under tools/ since the tools build system is a different world. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
2018-08-13Merge branch 'fixes' into nextMichael Ellerman1-0/+1
Merge our fixes branch from the 4.18 cycle to resolve some minor conflicts.
2018-08-07powerpc: Make CPU selection logic generic in MakefileChristophe Leroy1-7/+1
At the time being, when adding a new CPU for selection, both Kconfig.cputype and Makefile have to be modified. This patch moves into Kconfig.cputype the name of the CPU to me passed to the -mcpu= argument. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Rename the option to TARGET_CPU to echo the gcc documentation] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-08-07powerpc/Makefiles: Convert ifeq to ifdef where possibleRodrigo R. Galvao1-13/+13
In Makefiles if we're testing a CONFIG_FOO symbol for equality with 'y' we can instead just use ifdef. The latter reads easily, so convert to it where possible. Signed-off-by: Rodrigo R. Galvao <rosattig@linux.vnet.ibm.com> Reviewed-by: Mauro S. M. Rodrigues <maurosr@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-24powerpc: Add ppc64le and ppc64_book3e allmodconfig targetsMichael Ellerman1-0/+10
Similarly as we just did for 32-bit, add phony targets for generating a little endian and Book3E allmodconfig. These aren't covered by the regular allmodconfig, which is big endian and Book3S due to the way the Kconfig symbols are structured. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-24powerpc: Add ppc32_allmodconfig defconfig targetMichael Ellerman1-0/+5
Because the allmodconfig logic just sets every symbol to M or Y, it has the effect of always generating a 64-bit config, because CONFIG_PPC64 becomes Y. So to make it easier for folks to test 32-bit code, provide a phony defconfig target that generates a 32-bit allmodconfig. The 32-bit port has several mutually exclusive CPU types, we choose the Book3S variants as that's what the help text in Kconfig says is most common. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-18powerpc/Makefile: Assemble with -me500 when building for E500James Clarke1-0/+1
Some of the assembly files use instructions specific to BookE or E500, which are rejected with the now-default -mcpu=powerpc, so we must pass -me500 to the assembler just as we pass -me200 for E200. Fixes: 4bf4f42a2feb ("powerpc/kbuild: Set default generic machine type for 32-bit compile") Signed-off-by: James Clarke <jrtc27@jrtc27.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-19powerpc/e500mc: Set assembler machine type to e500mcMichael Jeanson1-0/+1
In binutils 2.26 a new opcode for the "wait" instruction was added for the POWER9 and has precedence over the one specific to the e500mc. Commit ebf714ff3756 ("powerpc/e500mc: Add support for the wait instruction in e500_idle") uses this instruction specifically on the e500mc to work around an erratum. This results in an invalid instruction in idle_e500 when we build for the e500mc on bintutils >= 2.26 with the default assembler machine type. Since multiplatform between e500 and non-e500 is not supported, set the assembler machine type globaly when CONFIG_PPC_E500MC=y. Signed-off-by: Michael Jeanson <mjeanson@efficios.com> Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Paul Mackerras <paulus@samba.org> CC: Michael Ellerman <mpe@ellerman.id.au> CC: Kumar Gala <galak@kernel.crashing.org> CC: Vakul Garg <vakul.garg@nxp.com> CC: Scott Wood <swood@redhat.com> CC: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> CC: linuxppc-dev@lists.ozlabs.org CC: linux-kernel@vger.kernel.org CC: stable@vger.kernel.org Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-11powerpc/kbuild: move -mprofile-kernel check to KconfigNicholas Piggin1-12/+1
This eliminates the workaround that requires disabling -mprofile-kernel by default in Kconfig. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-06-03powerpc/Makefile: set -mcpu=860 flag for the 8xxChristophe Leroy1-0/+1
When compiled with GCC 8.1, vmlinux is significantly bigger than with GCC 4.8. When looking at the generated code with objdump, we notice that all functions and loops when a 16 bytes alignment. This significantly increases the size of the kernel. It is pointless and even counterproductive as on the 8xx 'nop' also consumes one clock cycle. Size of vmlinux with GCC 4.8: text data bss dec hex filename 5801948 1626076 457796 7885820 7853fc vmlinux Size of vmlinux with GCC 8.1: text data bss dec hex filename 6764592 1630652 456476 8851720 871108 vmlinux Size of vmlinux with GCC 8.1 and this patch: text data bss dec hex filename 6331544 1631756 456476 8419776 8079c0 vmlinux Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-01powerpc/kbuild: Use flags variables rather than overriding LD/CC/ASNicholas Piggin1-7/+9
The powerpc toolchain can compile combinations of 32/64 bit and big/little endian, so it's convenient to consider, e.g., `CC -m64 -mbig-endian` To be the C compiler for the purpose of invoking it to build target artifacts. So overriding the CC variable to include these flags works for this purpose. Unfortunately that is not compatible with the way the proposed new Kconfig macro language will work. After previous patches in this series, these flags can be carefully passed in using flags instead. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-01powerpc/kbuild: Remove CROSS32 defines from top level powerpc MakefileNicholas Piggin1-7/+0
Switch VDSO32 build over to use CROSS32_COMPILE directly, and have it pass in -m32 after the standard c_flags. This allows endianness overrides to be removed and the endian and bitness flags moved into standard flags variables. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-01powerpc/kbuild: Set default generic machine type for 32-bit compileNicholas Piggin1-0/+8
Some 64-bit toolchains uses the wrong ISA variant for compiling 32-bit kernels, even with -m32. Debian's powerpc64le is one such case, and that is because it is built with --with-cpu=power8. So when cross compiling a 32-bit kernel with a 64-bit toolchain, set -mcpu=powerpc initially, which is the generic 32-bit powerpc machine type and scheduling model. CPU and platform code can override this with subsequent -mcpu flags if necessary. This is not done for 32-bit toolchains otherwise it would override their defaults, which are presumably set appropriately for the environment (moreso than a 64-bit cross compiler). This fixes a lot of build failures due to incompatible assembly when compiling 32-bit kernel with the Debian powerpc64le 64-bit toolchain. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-01powerpc/64s: Add POWER9 CPU type selectionNicholas Piggin1-1/+2
Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-01powerpc/64: Add GENERIC_CPU support for little endianNicholas Piggin1-0/+5
Add GENERIC_CPU support for little-endian rather than using POWER8 specific selection for POWER9 and above. Restrict GENERIC_CPU to POWER8 and above on little endian. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Duplicate GENERIC_CPU to avoid a kbuild warning about the prompt being redefined. Spell out that GENERIC means >= POWER4 for BE.] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-31powerpc/64s: Remove POWER4 supportNicholas Piggin1-3/+2
POWER4 has been broken since at least the change 49d09bf2a6 ("powerpc/64s: Optimise MSR handling in exception handling"), which requires mtmsrd L=1 support. This was introduced in ISA v2.01, and POWER4 supports ISA v2.00. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-31powerpc/64s: Set assembler machine type to POWER4Nicholas Piggin1-0/+1
Rather than override the machine type in .S code (which can hide wrong or ambiguous code generation for the target), set the type to power4 for all assembly. This also means we need to be careful not to build power4-only code when we're not building for Book3S, such as the "power7" versions of copyuser/page/memcpy. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Fix Book3E build, don't build the "power7" variants for non-Book3S] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-06powerpc: Keep const vars out of writable .sdataSegher Boessenkool1-0/+2
Newer gcc will support "-mno-readonly-in-sdata"[1], which makes sure that the optimization on PPC32 for variables getting moved into the .sdata section will not apply to const variables (which must be in .rodata). This was originally noticed in mm/rodata_test.c when rodata_test_data was not static: c0695034 g O .data 00000004 rodata_test_data After this patch with an updated compiler, this is correctly in .rodata. [1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82411 Reported-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-12-11powerpc/modules: Fix alignment of .toc section in kernel modulesAlan Modra1-0/+1
powerpc64 gcc can generate code that offsets an address, to access part of an object in memory. If the address is a -mcmodel=medium toc pointer relative address then code like the following is possible. addis r9,r2,var@toc@ha ld r3,var@toc@l(r9) ld r4,(var+8)@toc@l(r9) This works fine so long as var is naturally aligned, *and* r2 is sufficiently aligned. If not, there is a possibility that the offset added to access var+8 wraps over a n*64k+32k boundary. Modules don't have any guarantee that r2 is sufficiently aligned. Moreover, code generated by older compilers generates a .toc section with 2**0 alignment, which can result in relocation failures at module load time even without the wrap problem. Thus, this patch links modules with an aligned .toc section (Makefile and module.lds changes), and forces alignment for out of tree modules or those without a .toc section (module_64.c changes). Signed-off-by: Alan Modra <amodra@gmail.com> [desnesn: updated patch to apply to powerpc-next kernel v4.15 ] Signed-off-by: Desnes A. Nunes do Rosario <desnesn@linux.vnet.ibm.com> [mpe: Fix out-of-tree build, swap -256 for ~0xff, reflow comment] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-23Merge branch 'fixes' into nextMichael Ellerman1-12/+13
There's a non-trivial dependency between some commits we want to put in next and the KVM prefetch work around that went into fixes. So merge fixes into next.
2017-08-10powerpc/8xx: Getting rid of remaining use of CONFIG_8xxChristophe Leroy1-1/+1
Two config options exist to define powerpc MPC8xx: * CONFIG_PPC_8xx * CONFIG_8xx arch/powerpc/platforms/Kconfig.cputype has contained the following comment about CONFIG_8xx item for some years: "# this is temp to handle compat with arch=ppc" arch/powerpc is now the only place with remaining use of CONFIG_8xx: get rid of them. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-07-31powerpc/configs: Add a powernv_be_defconfigMichael Ellerman1-0/+4
Although pretty much everyone using powernv is running little endian, we should still test we can build for big endian. So add a powernv_be_defconfig, which is autogenerated by flipping the endian symbol in powernv_defconfig. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Cyril Bur <cyrilbur@gmail.com>
2017-07-26powerpc/Makefile: Fix ld version check with 64-bit LE-only toolchainMichael Ellerman1-12/+13
In commit efe0160cfd40 ("powerpc/64: Linker on-demand sfpr functions for modules"), we added an ld version check early in the powerpc top-level Makefile. Because the Makefile runs before the kernel config is setup, the checks for CONFIG_CPU_LITTLE_ENDIAN etc. all take the default case. So we end up configuring ld for 32-bit big endian. That would be OK, except that for historical (or perhaps no) reason, we use 'override LD' to add the endian flags to the LD variable itself, rather than the normal approach of adding them to LDFLAGS. The end result is that when we check the ld version we run it as: $(CROSS_COMPILE)ld -EB -m elf32ppc --version This often works, unless you are using a 64-bit only and/or little endian only, toolchain. In which case you see something like: $ make defconfig powerpc64le-linux-ld: unrecognised emulation mode: elf32ppc Supported emulations: elf64lppc elf32lppc elf32lppclinux elf32lppcsim /bin/sh: 1: [: -ge: unexpected operator The proper fix is to stop using 'override LD', but that will require a fair bit of testing. Instead we can fix it for now just by reordering the Makefile to do the version check earlier. Fixes: efe0160cfd40 ("powerpc/64: Linker on-demand sfpr functions for modules") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-05-30powerpc: Link warning for orphan sectionsNicholas Piggin1-0/+1
Add --orphan-handling=warn to final link flags. This ensures we can handle all sections explicitly. This would have caught subtle breakage such as 7de3b27bac47da9de08409df1d69664acbb72197 at build-time. Also bring existing orphan sections into the fold: - .text.hot and .text.unlikely are compiler generated sections. - .sdata2, .dynsbss, .plt are used by PPC32 - We previously did not specify DWARF_DEBUG or STABS_DEBUG - DWARF_DEBUG did not include all DWARF sections that can be emitted - A number of sections are unused and can be discarded. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-05-30powerpc/64: Linker on-demand sfpr functions for modulesNicholas Piggin1-0/+10
For final link, the powerpc64 linker generates fpr save/restore functions on-demand, placing them in the .sfpr section. Starting with binutils 2.25, these can be provided for non-final links with --save-restore-funcs. Use that where possible for module links. This saves about 200 bytes per module (~60kB) on powernv defconfig build. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-28powerpc: Add arch/powerpc/tools directoryNicholas Piggin1-1/+1
Move a couple of existing scripts under there. Remove scripts directory: a script is a tool, a tool is not a script. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-28powerpc: Use the new post-link pass to check relocationsNicholas Piggin1-11/+0
Currently powerpc has to introduce a dependency on its default build target zImage in order to run a relocation check pass over the linked vmlinux. This is deficient because the check is not run if the plain vmlinux target is built, or if one of the other boot targets is built. Switch to using the kbuild post-link pass, added in commit fbe6e37dab97 ("kbuild: add arch specific post-link Makefile") in order to run this check. In future powerpc will use this to do more complicated operations, but initially using it for something simple is a good first step. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-03powerpc: Fix compiling a BE kernel with a powerpc64le toolchainNicholas Piggin1-1/+10
GCC can compile with either endian, but the default ABI version is set based on the default endianness of the toolchain. Alan Modra says: you need both -mbig and -mabi=elfv1 to make a powerpc64le gcc generate powerpc64 code The opposite is true for powerpc64 when generating -mlittle it requires -mabi=elfv2 to generate v2 ABI, which we were already doing. This change adds ABI annotations together with endianness for all cases, LE and BE. This fixes the case of building a BE kernel with a toolchain that is LE by default. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-19 11:41:12 +0300