summaryrefslogtreecommitdiff
path: root/arch/openrisc/kernel
AgeCommit message (Collapse)AuthorFilesLines
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman2-0/+2
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-07Merge tag 'openrisc-for-linus' of git://github.com/openrisc/linuxLinus Torvalds2-2/+2
Pull OpenRISC updates from Stafford Horne: "Openrisc fixes for this 4.13 merge window, there is not really much here: - include cleanups, one with should reduce build time slightly - switch to new toolchain to new (>2 year old) toolchain prefix" * tag 'openrisc-for-linus' of git://github.com/openrisc/linux: openrisc: defconfig: Cleanup from old Kconfig options openrisc: explicitly include linux/bug.h in asm/fixmap.h openrisc: Switch to use export.h instead of module.h openrisc: Change toolchain from or32- to or1k-
2017-06-29arch: remove unused macro/function thread_saved_pc()Tobias Klauser1-5/+0
The only user of thread_saved_pc() in non-arch-specific code was removed in commit 8243d5597793 ("sched/core: Remove pointless printout in sched_show_task()"). Remove the implementations as well. Some architectures use thread_saved_pc() in their arch-specific code. Leave their thread_saved_pc() intact. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-29kthread: fix boot hang (regression) on MIPS/OpenRISCVegard Nossum1-2/+0
This fixes a regression in commit 4d6501dce079 where I didn't notice that MIPS and OpenRISC were reinitialising p->{set,clear}_child_tid to NULL after our initialisation in copy_process(). We can simply get rid of the arch-specific initialisation here since it is now always done in copy_process() before hitting copy_thread{,_tls}(). Review notes: - As far as I can tell, copy_process() is the only user of copy_thread_tls(), which is the only caller of copy_thread() for architectures that don't implement copy_thread_tls(). - After this patch, there is no arch-specific code touching p->set_child_tid or p->clear_child_tid whatsoever. - It may look like MIPS/OpenRISC wanted to always have these fields be NULL, but that's not true, as copy_process() would unconditionally set them again _after_ calling copy_thread_tls() before commit 4d6501dce079. Fixes: 4d6501dce079c1eb6bf0b1d8f528a5e81770109e ("kthread: Fix use-after-free if kthread fork fails") Reported-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> # MIPS only Acked-by: Stafford Horne <shorne@gmail.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: Jonas Bonn <jonas@southpole.se> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: openrisc@lists.librecores.org Cc: Jamie Iles <jamie.iles@oracle.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-15openrisc: Switch to use export.h instead of module.hStafford Horne2-2/+2
Reduce dependencies on module.h since all we need here is export.h for EXPORT_SYMBOL. Fixes: f50169324df4 ("module.h: split out the EXPORT_SYMBOL into export.h") Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-03-15openrisc: Export symbols needed by modulesStafford Horne2-0/+5
This was detected by allmodconfig, errors reported: ERROR: "empty_zero_page" [net/ceph/libceph.ko] undefined! ERROR: "__ucmpdi2" [lib/842/842_decompress.ko] undefined! ERROR: "empty_zero_page" [fs/nfs/objlayout/objlayoutdriver.ko] undefined! ERROR: "empty_zero_page" [fs/exofs/exofs.ko] undefined! ERROR: "empty_zero_page" [fs/crypto/fscrypto.ko] undefined! ERROR: "__ucmpdi2" [fs/btrfs/btrfs.ko] undefined! ERROR: "pm_power_off" [drivers/regulator/act8865-regulator.ko] undefined! ERROR: "__ucmpdi2" [drivers/media/i2c/adv7842.ko] undefined! ERROR: "__clear_user" [drivers/md/dm-mod.ko] undefined! ERROR: "__clear_user" [net/netfilter/x_tables.ko] undefined! Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-03-02sched/headers: Prepare to move kstack_end() from <linux/sched.h> to ↵Ingo Molnar1-0/+1
<linux/sched/task_stack.h> But first update the usage sites with the new header dependency. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar2-0/+2
<linux/sched/task_stack.h> We are going to split <linux/sched/task_stack.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/task_stack.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar1-0/+1
<linux/sched/task.h> We are going to split <linux/sched/task.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/task.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar2-0/+2
<linux/sched/debug.h> We are going to split <linux/sched/debug.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/debug.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-28scripts/spelling.txt: add "efective" pattern and fix typo instancesMasahiro Yamada1-1/+1
Fix typos and add the following to the scripts/spelling.txt: efective||effective While we are here, fix the "addres" as well in the touched line in arch/openrisc/kernel/entry.S. Link: http://lkml.kernel.org/r/1481573103-11329-10-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-28scripts/spelling.txt: add "aligment" pattern and fix typo instancesMasahiro Yamada3-7/+7
Fix typos and add the following to the scripts/spelling.txt: aligment||alignment I did not touch the "N_BYTE_ALIGMENT" macro in drivers/net/wireless/realtek/rtlwifi/wifi.h to avoid unpredictable impact. I fixed "_aligment_handler" in arch/openrisc/kernel/entry.S because it is surrounded by #if 0 ... #endif. It is surely safe and I confirmed "_alignment_handler" is correct. I also fixed the "controler" I found in the same hunk in arch/openrisc/kernel/head.S. Link: http://lkml.kernel.org/r/1481573103-11329-8-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-26Merge tag 'for-next-dma_ops' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma DMA mapping updates from Doug Ledford: "Drop IB DMA mapping code and use core DMA code instead. Bart Van Assche noted that the ib DMA mapping code was significantly similar enough to the core DMA mapping code that with a few changes it was possible to remove the IB DMA mapping code entirely and switch the RDMA stack to use the core DMA mapping code. This resulted in a nice set of cleanups, but touched the entire tree and has been kept separate for that reason." * tag 'for-next-dma_ops' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (37 commits) IB/rxe, IB/rdmavt: Use dma_virt_ops instead of duplicating it IB/core: Remove ib_device.dma_device nvme-rdma: Switch from dma_device to dev.parent RDS: net: Switch from dma_device to dev.parent IB/srpt: Modify a debug statement IB/srp: Switch from dma_device to dev.parent IB/iser: Switch from dma_device to dev.parent IB/IPoIB: Switch from dma_device to dev.parent IB/rxe: Switch from dma_device to dev.parent IB/vmw_pvrdma: Switch from dma_device to dev.parent IB/usnic: Switch from dma_device to dev.parent IB/qib: Switch from dma_device to dev.parent IB/qedr: Switch from dma_device to dev.parent IB/ocrdma: Switch from dma_device to dev.parent IB/nes: Remove a superfluous assignment statement IB/mthca: Switch from dma_device to dev.parent IB/mlx5: Switch from dma_device to dev.parent IB/mlx4: Switch from dma_device to dev.parent IB/i40iw: Remove a superfluous assignment statement IB/hns: Switch from dma_device to dev.parent ...
2017-02-25Merge tag 'openrisc-for-linus' of git://github.com/openrisc/linuxLinus Torvalds8-178/+349
Pull OpenRISC updates from Stafford Horne: "Highlights include: - optimized memset and memcpy routines, ~20% boot time saving - support for cpu idling - adding support for l.swa and l.lwa atomic operations (in spec from 2014) - use atomics to implement: bitops, cmpxchg, futex - the atomics are in preparation for SMP support" * tag 'openrisc-for-linus' of git://github.com/openrisc/linux: (25 commits) openrisc: head: Init r0 to 0 on start openrisc: Export ioremap symbols used by modules arch/openrisc/lib/memcpy.c: use correct OR1200 option openrisc: head: Remove unused strings openrisc: head: Move init strings to rodata section openrisc: entry: Fix delay slot detection openrisc: entry: Whitespace and comment cleanups scripts/checkstack.pl: Add openrisc support MAINTAINERS: Add the openrisc official repository openrisc: Add .gitignore openrisc: Add optimized memcpy routine openrisc: Add optimized memset openrisc: Initial support for the idle state openrisc: Fix the bitmask for the unit present register openrisc: remove unnecessary stddef.h include openrisc: add futex_atomic_* implementations openrisc: add optimized atomic operations openrisc: add cmpxchg and xchg implementations openrisc: add atomic bitops openrisc: add l.lwa/l.swa emulation ...
2017-02-24openrisc: head: Init r0 to 0 on startStafford Horne1-1/+4
Originally openrisc spec 0 specified that r0 would be wired to ground. This is no longer the case. r0 is not guaranteed to be 0 at init, so we need to initialize it to 0 before using it. Also, if we are clearing r0 we cant use r0 to clear itself. Change the the CLEAR_GPR macro to use movhi for clearing. Reported-by: Jakob Viketoft <jakob.viketoft@aacmicrotec.com> Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-02-24openrisc: head: Remove unused stringsStafford Horne1-11/+0
These string definitions are no longer used removed them. Noticed this while working on a CONFIG_DEBUG_INFO build issue. Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-02-24openrisc: head: Move init strings to rodata sectionStafford Horne1-0/+1
The strings used during the head/init phase of openrisc bootup were stored in the executable section of the binary. This causes compilation to fail when using CONFIG_DEBUG_INFO with error: Error: unaligned opcodes detected in executable segment Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-02-24openrisc: entry: Fix delay slot detectionStafford Horne1-2/+2
Use execption SR stored in pt_regs for detection, the current SR is not correct as the handler is running after return from exception. Also, The code that checks for a delay slot uses a flag bitmask and then wants to check if the result is not zero. The test it implemented was wrong. Correct it by changing the test to check result against non zero. Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-02-24openrisc: entry: Whitespace and comment cleanupsStafford Horne1-20/+18
Cleanups to whitespace and add some comments. Reading through the delay slot logic I noticed some things: - Delay slot instructions were not indented - Some comments are not lined up - Use tabs and spaces consistent with other code No functional change Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-02-24openrisc: Add .gitignoreStafford Horne1-0/+1
This helps to suppress the vmlinux.lds file. Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-02-24openrisc: Add optimized memsetOlof Kindgren1-0/+1
This adds a hand-optimized assembler version of memset and sets __HAVE_ARCH_MEMSET to use this version instead of the generic C routine Signed-off-by: Olof Kindgren <olof.kindgren@gmail.com> Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-02-24openrisc: Initial support for the idle stateSebastian Macke1-0/+11
This patch adds basic support for the idle state of the cpu. The patch overrides the regular idle function, enables the interupts, checks for the power management unit and enables the cpu doze mode if available. Signed-off-by: Sebastian Macke <sebastian@macke.de> [shorne@gmail.com: Fixed checkpatch, blankline after declarations] Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-02-24openrisc: remove unnecessary stddef.h includeStefan Kristiansson1-1/+0
This causes the build to fail when building with the or1k-musl-linux- toolchain and it is not needed. Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-02-06openrisc: add l.lwa/l.swa emulationStefan Kristiansson3-2/+206
This adds an emulation layer for implementations that lack the l.lwa and l.swa instructions. It handles these instructions both in kernel space and user space. Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> [shorne@gmail.com: Added delay slot pc adjust logic] Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-02-06openrisc: head: refactor out tlb flush into it's own functionStefan Kristiansson1-16/+22
This brings it inline with the other setup oprations done like the cache enables _ic_enable and _dc_enable. Also, this is going to make it easier to initialize additional cpu's when smp is introduced. Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> [shorne@gmail.com: Added commit body] Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-02-06openrisc: head: use THREAD_SIZE instead of magic constantStefan Kristiansson1-1/+3
The stack size was hard coded to 0x2000, use the standard THREAD_SIZE definition loaded from thread_info.h. Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> [shorne@gmail.com: Added body to the commit message] Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-02-06openrisc: tlb miss handler optimizationsStefan Kristiansson1-95/+46
By slightly reorganizing the code, the number of registers used in the tlb miss handlers can be reduced by two, thus removing the need to save them to memory. Also, some dead and commented out code is removed. No functional change. Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Signed-off-by: Jonas Bonn <jonas@southpole.se> Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-02-06openrisc: add cache way information to cpuinfoStefan Kristiansson1-31/+36
Motivation for this is to be able to print the way information properly in print_cpuinfo(), instead of hardcoding it to one. Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Signed-off-by: Jonas Bonn <jonas@southpole.se> [shorne@gmail.com fixed conflict with show_cpuinfo change] Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-01-26openrisc: migrate exception table users off module.h and onto extable.hPaul Gortmaker1-1/+1
These files were only including module.h for exception table related functions. We've now separated that content out into its own file "extable.h" so now move over to that and avoid all the extra header content in module.h that we don't really need to compile these files. Reported-by: kbuild test robot <lkp@intel.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Stafford Horne <shorne@gmail.com> Cc: openrisc@lists.librecores.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2017-01-24treewide: Constify most dma_map_ops structuresBart Van Assche1-1/+1
Most dma_map_ops structures are never modified. Constify these structures such that these can be write-protected. This patch has been generated as follows: git grep -l 'struct dma_map_ops' | xargs -d\\n sed -i \ -e 's/struct dma_map_ops/const struct dma_map_ops/g' \ -e 's/const struct dma_map_ops {/struct dma_map_ops {/g' \ -e 's/^const struct dma_map_ops;$/struct dma_map_ops;/' \ -e 's/const const struct dma_map_ops /const struct dma_map_ops /g'; sed -i -e 's/const \(struct dma_map_ops intel_dma_ops\)/\1/' \ $(git grep -l 'struct dma_map_ops intel_dma_ops'); sed -i -e 's/const \(struct dma_map_ops dma_iommu_ops\)/\1/' \ $(git grep -l 'struct dma_map_ops' | grep ^arch/powerpc); sed -i -e '/^struct vmd_dev {$/,/^};$/ s/const \(struct dma_map_ops[[:blank:]]dma_ops;\)/\1/' \ -e '/^static void vmd_setup_dma_ops/,/^}$/ s/const \(struct dma_map_ops \*dest\)/\1/' \ -e 's/const \(struct dma_map_ops \*dest = \&vmd->dma_ops\)/\1/' \ drivers/pci/host/*.c sed -i -e '/^void __init pci_iommu_alloc(void)$/,/^}$/ s/dma_ops->/intel_dma_ops./' arch/ia64/kernel/pci-dma.c sed -i -e 's/static const struct dma_map_ops sn_dma_ops/static struct dma_map_ops sn_dma_ops/' arch/ia64/sn/pci/pci_dma.c sed -i -e 's/(const struct dma_map_ops \*)//' drivers/misc/mic/bus/vop_bus.c Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Juergen Gross <jgross@suse.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: linux-arch@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Russell King <linux@armlinux.org.uk> Cc: x86@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-01-02openrisc: Add _text symbol to fix ksym build errorStafford Horne1-0/+2
The build robot reports: .tmp_kallsyms1.o: In function `kallsyms_relative_base': >> (.rodata+0x8a18): undefined reference to `_text' This is when using 'make alldefconfig'. Adding this _text symbol to mark the start of the kernel as in other architecture fixes this. Signed-off-by: Stafford Horne <shorne@gmail.com> Acked-by: Jonas Bonn <jonas@southpole.se>
2016-12-25clocksource: Use a plain u64 instead of cycle_tThomas Gleixner1-2/+2
There is no point in having an extra type for extra confusion. u64 is unambiguous. Conversion was done with the following coccinelle script: @rem@ @@ -typedef u64 cycle_t; @fix@ typedef cycle_t; @@ -cycle_t +u64 Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org>
2016-12-24Replace <asm/uaccess.h> with <linux/uaccess.h> globallyLinus Torvalds4-4/+4
This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-15arch/openrisc: add option to skip DMA sync as a part of mappingAlexander Duyck1-0/+3
This change allows us to pass DMA_ATTR_SKIP_CPU_SYNC which allows us to avoid invoking cache line invalidation if the driver will just handle it via a sync_for_cpu or sync_for_device call. Link: http://lkml.kernel.org/r/20161110113524.76501.87966.stgit@ahduyck-blue-test.jf.intel.com Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Cc: Jonas Bonn <jonas@southpole.se> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-12openrisc: include l.swa in check for write data pagefaultStefan Kristiansson1-1/+1
During page fault handling we check the last instruction to understand if the fault was for a read or for a write. By default we fall back to read. New instructions were added to the openrisc 1.1 spec for an atomic load/store pair (l.lwa/l.swa). This patch adds the opcode for l.swa (0x33) allowing it to be treated as a write operation. Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> [shorne@gmail.com: expanded a bit on the comment] Signed-off-by: Stafford Horne <shorne@gmail.com>
2016-12-12openrisc: Updates after openrisc.net has been lostStafford Horne1-1/+1
The openrisc.net domain expired and was taken over by squatters. These updates point documentation to the new domain, mailing lists and git repos. Also, Jonas is not the main maintainer anylonger, he reviews changes but does not maintain a repo or sent pull requests. Updating this to add Stafford and Stefan who are the active maintainers. Acked-by: Olof Kindgren <olof.kindgren@gmail.com> Signed-off-by: Stafford Horne <shorne@gmail.com>
2016-12-12openrisc: Consolidate setup to use memblock instead of bootmemStafford Horne1-24/+12
Clearing out one todo item. Use the memblock boot time memory which is the current standard. Tested-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jonas <jonas@southpole.se> Signed-off-by: Stafford Horne <shorne@gmail.com>
2016-12-12openrisc: remove the redundant of_platform_populateRob Herring1-10/+0
The of_platform_populate call in the openrisc arch code is now redundant as the DT core provides a default call. Openrisc has a NULL match table which means only top level nodes with compatible strings will have devices creates. The default version will also descend nodes in the match table such as "simple-bus" which should be fine as openrisc doesn't have any of these (though it is preferred that memory-mapped peripherals be grouped under a bus node(s)). Signed-off-by: Rob Herring <robh@kernel.org> Cc: Jonas Bonn <jonas@southpole.se> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Stafford Horne <shorne@gmail.com>
2016-12-12openrisc: Support both old (or32) and new (or1k) toolchainGuenter Roeck1-1/+7
The output file format for or1k has changed from "elf32-or32" to "elf32-or1k". Select the correct output format automatically to be able to compile the kernel with both toolchain variants. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Stafford Horne <shorne@gmail.com>
2016-12-12openrisc: Add thread-local storage (TLS) supportChristian Svensson1-0/+13
Historically OpenRISC GCC has reserved r10 which we now use to hold the thread pointer for thread-local storage (TLS). Signed-off-by: Christian Svensson <blue@cmd.nu> Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Stafford Horne <shorne@gmail.com>
2016-12-12openrisc: restore all regs on rt_sigreturnJonas Bonn1-1/+9
Fix signal handling for when signals are handled as the result of timers or exceptions, previous code assumed syscalls. This was noticeable with X crashing where it uses SIGALRM. This patch restores all regs before returning to userspace via _resume_userspace instead of via syscall return path. The rt_sigreturn syscall is more like a context switch than a function call; it entails a return from one context (the signal handler) to another (the process in question). For a context switch like this there are effectively no call-saved regs that remain constant across the transition. Reported-by: Sebastian Macke <sebastian@macke.de> Signed-off-by: Jonas Bonn <jonas@southpole.se> Tested-by: Guenter Roeck <linux@roeck-us.net> [shorne@gmail.com: Updated comment better reflect change and issue] Signed-off-by: Stafford Horne <shorne@gmail.com>
2016-10-08nmi_backtrace: generate one-line reports for idle cpusChris Metcalf1-0/+1
When doing an nmi backtrace of many cores, most of which are idle, the output is a little overwhelming and very uninformative. Suppress messages for cpus that are idling when they are interrupted and just emit one line, "NMI backtrace for N skipped: idling at pc 0xNNN". We do this by grouping all the cpuidle code together into a new .cpuidle.text section, and then checking the address of the interrupted PC to see if it lies within that section. This commit suitably tags x86 and tile idle routines, and only adds in the minimal framework for other architectures. Link: http://lkml.kernel.org/r/1472487169-14923-5-git-send-email-cmetcalf@mellanox.com Signed-off-by: Chris Metcalf <cmetcalf@mellanox.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Daniel Thompson <daniel.thompson@linaro.org> [arm] Tested-by: Petr Mladek <pmladek@suse.com> Cc: Aaron Tomlin <atomlin@redhat.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Russell King <linux@arm.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04dma-mapping: use unsigned long for dma_attrsKrzysztof Kozlowski1-11/+10
The dma-mapping core and the implementations do not change the DMA attributes passed by pointer. Thus the pointer can point to const data. However the attributes do not have to be a bitfield. Instead unsigned long will do fine: 1. This is just simpler. Both in terms of reading the code and setting attributes. Instead of initializing local attributes on the stack and passing pointer to it to dma_set_attr(), just set the bits. 2. It brings safeness and checking for const correctness because the attributes are passed by value. Semantic patches for this change (at least most of them): virtual patch virtual context @r@ identifier f, attrs; @@ f(..., - struct dma_attrs *attrs + unsigned long attrs , ...) { ... } @@ identifier r.f; @@ f(..., - NULL + 0 ) and // Options: --all-includes virtual patch virtual context @r@ identifier f, attrs; type t; @@ t f(..., struct dma_attrs *attrs); @@ identifier r.f; @@ f(..., - NULL + 0 ) Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Acked-by: Mark Salter <msalter@redhat.com> [c6x] Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris] Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm] Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp] Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core] Acked-by: David Vrabel <david.vrabel@citrix.com> [xen] Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb] Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon] Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390] Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32] Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc] Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26arch, ftrace: for KASAN put hard/soft IRQ entries into separate sectionsAlexander Potapenko1-0/+1
KASAN needs to know whether the allocation happens in an IRQ handler. This lets us strip everything below the IRQ entry point to reduce the number of unique stack traces needed to be stored. Move the definition of __irq_entry to <linux/interrupt.h> so that the users don't need to pull in <linux/ftrace.h>. Also introduce the __softirq_entry macro which is similar to __irq_entry, but puts the corresponding functions to the .softirqentry.text section. Signed-off-by: Alexander Potapenko <glider@google.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-08-10openrisc/time: Migrate to new 'set-state' interfaceViresh Kumar1-24/+0
Migrate openrisc driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. We weren't doing anything in the ->set_mode() callback. So, this patch doesn't provide any set-state callbacks. Cc: Jonas Bonn <jonas@southpole.se> Cc: linux@lists.openrisc.net Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-04-16Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-24/+26
Merge second patchbomb from Andrew Morton: - the rest of MM - various misc bits - add ability to run /sbin/reboot at reboot time - printk/vsprintf changes - fiddle with seq_printf() return value * akpm: (114 commits) parisc: remove use of seq_printf return value lru_cache: remove use of seq_printf return value tracing: remove use of seq_printf return value cgroup: remove use of seq_printf return value proc: remove use of seq_printf return value s390: remove use of seq_printf return value cris fasttimer: remove use of seq_printf return value cris: remove use of seq_printf return value openrisc: remove use of seq_printf return value ARM: plat-pxa: remove use of seq_printf return value nios2: cpuinfo: remove use of seq_printf return value microblaze: mb: remove use of seq_printf return value ipc: remove use of seq_printf return value rtc: remove use of seq_printf return value power: wakeup: remove use of seq_printf return value x86: mtrr: if: remove use of seq_printf return value linux/bitmap.h: improve BITMAP_{LAST,FIRST}_WORD_MASK MAINTAINERS: CREDITS: remove Stefano Brivio from B43 .mailmap: add Ricardo Ribalda CREDITS: add Ricardo Ribalda Delgado ...
2015-04-16openrisc: remove use of seq_printf return valueJoe Perches1-24/+26
The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by: Joe Perches <joe@perches.com> Cc: Jonas Bonn <jonas@southpole.se> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15Merge branch 'exec_domain_rip_v2' of ↵Linus Torvalds1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/rw/misc Pull exec domain removal from Richard Weinberger: "This series removes execution domain support from Linux. The idea behind exec domains was to support different ABIs. The feature was never complete nor stable. Let's rip it out and make the kernel signal handling code less complicated" * 'exec_domain_rip_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/misc: (27 commits) arm64: Removed unused variable sparc: Fix execution domain removal Remove rest of exec domains. arch: Remove exec_domain from remaining archs arc: Remove signal translation and exec_domain xtensa: Remove signal translation and exec_domain xtensa: Autogenerate offsets in struct thread_info x86: Remove signal translation and exec_domain unicore32: Remove signal translation and exec_domain um: Remove signal translation and exec_domain tile: Remove signal translation and exec_domain sparc: Remove signal translation and exec_domain sh: Remove signal translation and exec_domain s390: Remove signal translation and exec_domain mn10300: Remove signal translation and exec_domain microblaze: Remove signal translation and exec_domain m68k: Remove signal translation and exec_domain m32r: Remove signal translation and exec_domain m32r: Autogenerate offsets in struct thread_info frv: Remove signal translation and exec_domain ...
2015-04-12arch: Remove exec_domain from remaining archsRichard Weinberger1-2/+0
Signed-off-by: Richard Weinberger <richard@nod.at>
2015-04-12whack-a-mole: no need to set_fs(USER_DS) in {start,flush}_thread()Al Viro1-1/+0
flush_old_exec() has already done that. Back on 2011 a bunch of instances like that had been kicked out, but that hadn't taken care of then-out-of-tree architectures, obviously, and they served as reinfection vector... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-26 23:33:32 +0300