summaryrefslogtreecommitdiff
path: root/arch/mips
AgeCommit message (Collapse)AuthorFilesLines
2017-01-25MIPS: Lantiq: Lock DMA register accesses for SMPHauke Mehrtens1-18/+20
The DMA controller channel and port configuration is changed by selecting the port or channel in one register and then update the configuration in other registers. This has to be done in an atomic operation. Previously only the local interrupts were deactivated which works for single CPU systems. If the system supports SMP a better locking is needed, use spinlocks instead. On more recent SoCs (at least xrx200 and later) there are two memory regions to change the configuration, there we could use one area for each CPU and do not have to synchronize between the CPUs and more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: john@phrozen.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14912/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-25mips: ath79: clock:- Unmap region obtained by of_iomapArvind Yadav1-2/+5
Free memory mapping, if ath79_clocks_init_dt_ng is not successful. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Fixes: 3bdf1071ba7d ("MIPS: ath79: update devicetree clock support for AR9132") Cc: antonynpavlov@gmail.com Cc: albeu@free.fr Cc: hackpascal@gmail.com Cc: sboyd@codeaurora.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14915/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-25MIPS: Generic: Fix big endian CPUs on generic machineMatt Redfearn1-0/+1
Big endian CPUs require SWAP_IO_SPACE enabled to swap accesses to little endian peripherals. Without this patch, big endian kernels fail to communicate with little endian periperals, such as PCI devices, on QEMU and FPGA based platforms. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Fixes: eed0eabd12ef ("MIPS: generic: Introduce generic DT-based board support") Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15105/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-25MIPS: BCM47XX: Add Luxul devices to the databaseDan Haab4-0/+171
So far only Luxul XWR-1750 router was supported. This adds a set of other Luxul devices based on BCM47XX. It's a standard support for LEDs and buttons. Signed-off-by: Dan Haab <dhaab@luxul.com> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15106/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-25MIPS: syscall: Return directly in mips_mmap()Markus Elfring1-9/+2
* Return an error code without storing it in an intermediate variable. * Delete the local variable "result" which became unnecessary with this refactoring. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: linux-mips@linux-mips.org Cc: LKML <linux-kernel@vger.kernel.org> Cc: kernel-janitors@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15073/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-25MIPS: MT: Move an assignment for the variable "retval" in ↵Markus Elfring1-2/+3
mipsmt_sys_sched_setaffinity() A local variable was set to an error code in one case before a concrete error situation was detected. Thus move the corresponding assignment into an if branch to indicate a software failure there. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: linux-mips@linux-mips.org Cc: LKML <linux-kernel@vger.kernel.org> Cc: kernel-janitors@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15072/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-25MIPS: Return directly in 32_mmap2()Markus Elfring1-8/+3
* Return a failure indication without storing it in an intermediate variable. * Delete the local variable "error" which became unnecessary with this refactoring. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: linux-mips@linux-mips.org Cc: LKML <linux-kernel@vger.kernel.org> Cc: kernel-janitors@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15071/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-25MIPS: Avoid old-style declarationArnd Bergmann4-5/+5
gcc warns about nonstandard declarations: arch/mips/sgi-ip32/ip32-irq.c:31:1: error: 'inline' is not at beginning of declaration [-Werror=old-style-declaration] arch/mips/sgi-ip32/ip32-irq.c:36:1: error: 'inline' is not at beginning of declaration [-Werror=old-style-declaration] arch/mips/sgi-ip27/ip27-klnuma.c: In function 'replicate_kernel_text': arch/mips/sgi-ip27/ip27-klnuma.c:85:116: error: old-style function definition [-Werror=old-style-definition] Moving 'inline' before the return type, and adding argument types shuts up the warning here. This patch affects several platforms, but all in a trivial way. I'm fixing up all instances I found in any of the 'defconfig' builds. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15050/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-25MIPS: ip22: Fix ip28 build for modern gccArnd Bergmann1-1/+1
kernelci reports a failure of the ip28_defconfig build after upgrading its gcc version: arch/mips/sgi-ip22/Platform:29: *** gcc doesn't support needed option -mr10k-cache-barrier=store. Stop. The problem apparently is that the -mr10k-cache-barrier=store option is now rejected for CPUs other than r10k. Explicitly including the CPU in the check fixes this and is safe because both options were introduced in gcc-4.4. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15049/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-25MIPS: Octeon: Avoid empty-body warningArnd Bergmann1-10/+5
gcc-6 reports a harmless build warning: arch/mips/cavium-octeon/dma-octeon.c: In function 'octeon_dma_alloc_coherent': arch/mips/cavium-octeon/dma-octeon.c:179:3: error: suggest braces around empty body in an 'else' statement [-Werror=empty-body] We can fix this by rearranging the code slightly using the IS_ENABLED() macro. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15048 Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-25MIPS: Loongson64: Fix empty-body warning in dma_allocArnd Bergmann1-14/+6
A new gcc warning shows up for this old code with gcc-6: arch/mips/loongson64/common/dma-swiotlb.c: In function 'loongson_dma_alloc_coherent': arch/mips/loongson64/common/dma-swiotlb.c:35:2: error: suggest braces around empty body in an 'else' statement [-Werror=empty-body] The code can be easily restructured to look more readable and avoid the warning at the same time. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Robin Murphy <robin.murphy@arm.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15047/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-25MIPS: ralink: Remove unused rt*_wdt_reset functionsArnd Bergmann3-31/+0
All pointers to these functions were removed, so now they produce warnings: arch/mips/ralink/rt305x.c:92:13: error: 'rt305x_wdt_reset' defined but not used [-Werror=unused-function] This removes the functions. If we need them again, the patch can be reverted later. Fixes: f576fb6a0700 ("MIPS: ralink: cleanup the soc specific pinmux data") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: John Crispin <john@phrozen.org> Cc: Colin Ian King <colin.king@canonical.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15044/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-25MIPS: ralink: Fix request_mem_region error handlingArnd Bergmann2-4/+4
request_mem_region returns a NULL pointer on error, comparing it against a number results in a warning: arch/mips/ralink/of.c: In function 'plat_of_remap_node': arch/mips/ralink/of.c:45:15: error: ordered comparison of pointer with integer zero [-Werror=extra] arch/mips/ralink/irq.c: In function 'intc_of_init': arch/mips/ralink/irq.c:167:15: error: ordered comparison of pointer with integer zero [-Werror=extra] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: John Crispin <john@phrozen.org> Cc: Tobias Wolf <dev-NTEO@vplace.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15045/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-25MIPS: ralink: Remove unused timer functionsArnd Bergmann1-14/+0
The functions were originally used for the module unload path, but are not referenced any more and just cause warnings: arch/mips/ralink/timer.c:104:13: error: 'rt_timer_disable' defined but not used [-Werror=unused-function] arch/mips/ralink/timer.c:74:13: error: 'rt_timer_free' defined but not used [-Werror=unused-function] Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Fixes: 62ee73d284e7 ("MIPS: ralink: Make timer explicitly non-modular") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: John Crispin <john@phrozen.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15041/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-25MIPS: Lantiq: Fix another request_mem_region() return code checkArnd Bergmann1-2/+2
Hauke already fixed a couple of them, but one instance remains that checks for a negative integer when it should check for a NULL pointer: arch/mips/lantiq/xway/sysctrl.c: In function 'ltq_soc_init': arch/mips/lantiq/xway/sysctrl.c:473:19: error: ordered comparison of pointer with integer zero [-Werror=extra] Fixes: 6e807852676a ("MIPS: Lantiq: Fix check for return value of request_mem_region()") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: John Crispin <john@phrozen.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15043/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-25MIPS: Alchemy: Remove duplicate initializerArnd Bergmann1-1/+0
We get a harmless warning about a duplicate initalizer for the i2c board info structure: arch/mips/alchemy/board-gpr.c:239:11: error: initialized field overwritten [-Werror=override-init] As both initializers have the identical value, we can simply drop the second one. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15046/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-25MIPS: 'make -s' should be silentArnd Bergmann1-2/+2
A clean mips64 build produces no output except for two lines: Checking missing-syscalls for N32 Checking missing-syscalls for O32 On other architectures, there is no output at all, so let's do the same here for the sake of build testing. The 'kecho' macro is used to print the message on a normal build but skip it with 'make -s'. Fixes: e48ce6b8df5b ("[MIPS] Simplify missing-syscalls for N32 and O32") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: Maarten ter Huurne <maarten@treewalker.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15040/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-25MIPS: VDSO: avoid duplicate CAC_BASE definitionArnd Bergmann1-2/+4
vdso.h includes <spaces.h> implicitly after defining CONFIG_32BITS. This defeats the override in mach-ip27/spaces.h, leading to a build error that shows up in kernelci.org: In file included from arch/mips/include/asm/mach-ip27/spaces.h:29:0, from arch/mips/include/asm/page.h:12, from arch/mips/vdso/vdso.h:26, from arch/mips/vdso/gettimeofday.c:11: arch/mips/include/asm/mach-generic/spaces.h:28:0: error: "CAC_BASE" redefined [-Werror] #define CAC_BASE _AC(0x80000000, UL) An earlier patch tried to make the second definition conditional, but that patch had the #ifdef in the wrong place, and would lead to another warning: arch/mips/include/asm/io.h: In function 'phys_to_virt': arch/mips/include/asm/io.h:138:9: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] For all I can tell, there is no other reason than vdso32 to ever include this file with CONFIG_32BITS set, and the vdso itself should never refer to the base addresses as it is running in user space, so adding an #ifdef here is safe. Link: https://patchwork.kernel.org/patch/9418187/ Fixes: 3ffc17d8768b ("MIPS: Adjust MIPS64 CAC_BASE to reflect Config.K0") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15039/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-24MIPS: Fix modversionsArnd Bergmann6-9/+43
kernelci.org reports tons of build warnings for linux-next: 35 WARNING: "memcpy" [fs/fat/msdos.ko] has no CRC! 35 WARNING: "__copy_user" [fs/fat/fat.ko] has no CRC! 32 WARNING: EXPORT symbol "memset" [vmlinux] version generation failed, symbol will not be versioned. 32 WARNING: EXPORT symbol "copy_page" [vmlinux] version generation failed, symbol will not be versioned. 32 WARNING: EXPORT symbol "clear_page" [vmlinux] version generation failed, symbol will not be versioned. 32 WARNING: EXPORT symbol "__strncpy_from_user_nocheck_asm" [vmlinux] version generation failed, symbol will not be versioned. The problem here is mainly the missing asm/asm-prototypes.h header file that is supposed to include the prototypes for each symbol that is exported from an assembler file. A second problem is that the asm/uaccess.h header contains some but not all the necessary declarations for the user access helpers. Finally, the vdso build is broken once we add asm/asm-prototypes.h, so we have to fix this at the same time by changing the vdso header. My approach here is to just not look for exported symbols in the VDSO assembler files, as the symbols cannot be exported anyway. Fixes: 576a2f0c5c6d ("MIPS: Export memcpy & memset functions alongside their definitions") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: James Hogan <james.hogan@imgtec.com> Cc: Maciej W. Rozycki <macro@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15038/ Patchwork: https://patchwork.linux-mips.org/patch/15069/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-24MIPS: Update ip27_defconfig for SCSI_DH changeArnd Bergmann1-1/+1
Since linux-4.3, SCSI_DH is a bool symbol, causing a warning in kernelci.org: arch/mips/configs/ip27_defconfig:136:warning: symbol value 'm' invalid for SCSI_DH This updates the defconfig to have the feature built-in. Fixes: 086b91d052eb ("scsi_dh: integrate into the core SCSI code") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15001/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-24MIPS: Update lemote2f_defconfig for CPU_FREQ_STAT changeArnd Bergmann1-1/+1
Since linux-4.8, CPU_FREQ_STAT is a bool symbol, causing a warning in kernelci.org: arch/mips/configs/lemote2f_defconfig:42:warning: symbol value 'm' invalid for CPU_FREQ_STAT This updates the defconfig to have the feature built-in. Fixes: 1aefc75b2449 ("cpufreq: stats: Make the stats code non-modular") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15000/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-24MIPS: Update defconfigs for NF_CT_PROTO_DCCP/UDPLITE changeArnd Bergmann7-12/+12
In linux-4.10-rc, NF_CT_PROTO_UDPLITE and NF_CT_PROTO_DCCP are bool symbols instead of tristate, and kernelci.org reports a bunch of warnings for this, like: arch/mips/configs/malta_kvm_guest_defconfig:63:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE arch/mips/configs/malta_defconfig:62:warning: symbol value 'm' invalid for NF_CT_PROTO_DCCP arch/mips/configs/malta_defconfig:63:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE arch/mips/configs/ip22_defconfig:70:warning: symbol value 'm' invalid for NF_CT_PROTO_DCCP arch/mips/configs/ip22_defconfig:71:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE This changes all the MIPS defconfigs with these symbols to have them built-in. Fixes: 9b91c96c5d1f ("netfilter: conntrack: built-in support for UDPlite") Fixes: c51d39010a1b ("netfilter: conntrack: built-in support for DCCP") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14999/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-24MIPS: BMIPS: Add support SPI device nodesJaedon Shin16-6/+478
Adds SPI device nodes to BCM7xxx MIPS based SoCs. Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14990/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-24MIPS: Fix printk continuations in cpu-bugs64.cJames Hogan1-12/+12
64-bit pre-r6 kernels output the following broken printk continuation lines during boot: Checking for the multiply/shift bug... no. Checking for the daddiu bug... no. Checking for the daddi bug... no. Fix the printk continuations in cpu-bugs64.c to use pr_cont to restore the correct output: Checking for the multiply/shift bug... no. Checking for the daddiu bug... no. Checking for the daddi bug... no. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14916/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-03MIPS: zboot: Consolidate compiler flag filtering.Ralf Baechle1-1/+1
Al Viro noticed that we were using two different methods to filter out flags from KBUILD_CFLAGS. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Reported-by: Al Viro <viro@zeniv.linux.org.uk>
2017-01-03MIPS: ralink: Fix incorrect assignment on ralink_socColin Ian King1-1/+1
ralink_soc sould be assigned to RT3883_SOC, replace incorrect comparision with assignment. Signed-off-by: Colin Ian King <colin.king@canonical.com> Fixes: 418d29c87061 ("MIPS: ralink: Unify SoC id handling") Cc: John Crispin <john@phrozen.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14903/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-03MIPS: sc-mips: L2 cache is inclusive of L1 dcache for CM3Paul Burton1-0/+1
In systems with CM3 & higher, the L2 cache is inclusive of the L1 dcache. Indicate this such that cpu_has_inclusive_pcaches evaluates true and we avoid some unnecessary cache ops during DMA cache maintenance. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14018/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-03MIPS: c-r4k: Treat physically indexed dcaches as not aliasingPaul Burton1-0/+4
Physically indexed caches cannot suffer from virtual aliasing, so clear the MIPS_CACHE_ALIASES bit in order to ensure we don't do extra work avoiding aliasing that cannot happen. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14017/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-03MIPS: c-r4k: Treat I6400 dcache as though physically indexedPaul Burton1-1/+1
The L1 data cache in I6400 CPUs is indexed by physical address bits if an entry for the address is present in the DTLB early enough in the pipelined execution of a memory access instruction. If an entry is not present then it's indexed by virtual address bits, but hardware will check in a later pipeline stage when a DTLB entry has been created whether the virtual address bits used match the physical address bits, and if not will transparently restart the memory access instruction. This means that although it isn't always physically indexed, it appears so to software & we can treat the I6400 L1 data cache as being physically indexed in order to avoid considering aliasing. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14016/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-03MIPS: Loongson1B: Change the OSC clock nameKelvin Cheung1-1/+1
This patch changes the OSC clock name to "osc_clk" as expected by all clock users. Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-clk@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13903/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-03MIPS: Netlogic: Fix assembler warning from smpboot.SPaul Burton1-2/+2
The netlogic platform can be built for either MIPS32 or MIPS64, and when built for MIPS32 (as by nlm_xlr_defconfig) the use of the dla pseudo-instruction leads to warnings such as the following from recent versions of the GNU assembler: arch/mips/netlogic/common/smpboot.S: Assembler messages: arch/mips/netlogic/common/smpboot.S:62: Warning: dla used to load 32-bit register; recommend using la instead arch/mips/netlogic/common/smpboot.S:63: Warning: dla used to load 32-bit register; recommend using la instead Avoid these warnings by using the PTR_LA macro to make use of the appropriate la or dla pseudo-instruction for the build. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Fixes: 66d29985fab8 ("MIPS: Netlogic: Merge some of XLR/XLP wakup code") Cc: James Hogan <james.hogan@imgtec.com> Cc: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14185/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-03MIPS: Export {copy, clear}_page functions alongside their definitionsPaul Burton4-25/+6
Now that EXPORT_SYMBOL can be used from assembly source, move the EXPORT_SYMBOL invocations for the copy_page & clear_page functions to be alongside their definitions. With this change there are no longer any symbols exported from mips_ksyms.c so remove the file. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14515/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-03MIPS: Export memcpy & memset functions alongside their definitionsPaul Burton4-24/+19
Now that EXPORT_SYMBOL can be used from assembly source, move the EXPORT_SYMBOL invocations for the memcpy & memset functions & variants thereof to be alongside their definitions. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14514/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-03MIPS: Export string functions alongside their definitionsPaul Burton4-24/+10
Now that EXPORT_SYMBOL can be used from assembly source, move the EXPORT_SYMBOL invocations for the strlen*, strnlen* & strncpy* functions to be alongside their definitions. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14513/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-03MIPS: Export csum functions alongside their definitionsPaul Burton2-8/+6
Now that EXPORT_SYMBOL can be used from assembly source, move the EXPORT_SYMBOL invocations for the csum_partial_* functions to be alongside their definitions. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14512/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-03MIPS: Export invalid_pte_table alongside its definitionPaul Burton2-2/+2
It's unclear to me why this wasn't always the case, but move the EXPORT_SYMBOL invocation for invalid_pte_table to be alongside its definition. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14511/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-03MIPS: Export _mcount alongside its definitionPaul Burton2-4/+3
Now that EXPORT_SYMBOL can be used from assembly source, move the EXPORT_SYMBOL invocation for _mcount to be alongside its definition. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14525/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-03MIPS: Export _save_fp & _save_msa alongside their definitionsPaul Burton3-8/+5
Now that EXPORT_SYMBOL can be used from assembly source, move the EXPORT_SYMBOL invocations for _save_fp & _save_msa to be alongside their definitions. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14509/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-03MIPS: End asm function prologue macros with .insnPaul Burton1-4/+6
When building a kernel targeting a microMIPS ISA, recent GNU linkers will fail the link if they cannot determine that the target of a branch or jump is microMIPS code, with errors such as the following: mips-img-linux-gnu-ld: arch/mips/built-in.o: .text+0x542c: Unsupported jump between ISA modes; consider recompiling with interlinking enabled. mips-img-linux-gnu-ld: final link failed: Bad value or: ./arch/mips/include/asm/uaccess.h:1017: warning: JALX to a non-word-aligned address Placing anything other than an instruction at the start of a function written in assembly appears to trigger such errors. In order to prepare for allowing us to follow function prologue macros with an EXPORT_SYMBOL invocation, end the prologue macros (LEAD, NESTED & FEXPORT) with a .insn directive. This ensures that the start of the function is marked as code, which always makes sense for functions & safely prevents us from hitting the link errors described above. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: Maciej W. Rozycki <macro@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14508/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-03MIPS: tlbex: Clear ISA bit when writing to handle_tlb{l,m,s}Paul Burton1-3/+3
When generating TLB exception handling code we write to memory reserved at the handle_tlbl, handle_tlbm & handle_tlbs symbols. Up until now the ISA bit has always been clear simply because the assembly code reserving the space for those functions places no instructions in them. In preparation for marking all LEAF functions as containing code, explicitly clear the ISA bit when calculating the addresses at which to write TLB exception handling code. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14507/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-03MIPS: Use generic asm/export.hPaul Burton1-0/+1
Include export.h in the list of generic headers used by the MIPS architecture for use by later patches. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14506/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-03MIPS: IRQ: Remove useless i8259_of_init() prototype.Ralf Baechle1-1/+0
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-03MIPS: uprobes: Remove __weak attribute from arch_uprobe_copy_ixol.Marcin Nowakowski1-1/+1
Arch-specific implementation of arch_uprobe_copy_ixol is expected to override the weak implementation in generic code. As currently both implementations are marked as weak, it is up to the linker to chose one. Remove the __weak attribute from MIPS code to make sure the correct version is used. Fixes: 40e084a506eb ("MIPS: Add uprobes support.") Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14660/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-03MIPS: ralink: Cosmetic change to prom_init().John Crispin1-5/+4
Over the years the code has been changed various times leading to argc/argv being defined in a different function to where we actually use the variables. Clean this up by moving them to prom_init_cmdline(). Signed-off-by: John Crispin <john@phrozen.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14902/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-03MIPS: ralink: Add missing symbol for highmem support.John Crispin1-0/+1
MT7621 has highmem. this was previously not working as the required symbol was not selected in the Kconfig file. Signed-off-by: John Crispin <john@phrozen.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14901/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-03MIPS: ralink: Add missing clk_round_rate().John Crispin1-0/+6
As we dont use the common clock api yet we need to add this stub to allow building drivers that use the API. Signed-off-by: John Crispin <john@phrozen.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14900/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-03MIPS: ralink: Fix a typo in the pinmux setup.John Crispin1-9/+9
There is a typo inside the pinmux setup code. The function is really called utif and not util. This was recently discovered when people were trying to make the UTIF interface work. Signed-off-by: John Crispin <john@phrozen.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14899/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-03MIPS: ralink: Add missing pinmux.John Crispin2-3/+12
The mt7620 has a pin that can be used to generate an external reference clock. The pinmux setup was missing the definition of said pin. This patch adds it. Signed-off-by: John Crispin <john@phrozen.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14898/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-03MIPS: ralink: Add missing I2C and I2S clocks.John Crispin4-0/+10
This patch adds two additional clocks required by the audio interface of the SoCs. Signed-off-by: John Crispin <john@phrozen.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14897/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-03MIPS: ralink: MT7621 does not set its SoC type.John Crispin1-1/+1
The code does not set the SoC type properly. This went unnoticed until now as the SoC does not share any of the driver code with the other SoCs, until we made the mmc driver work. Signed-off-by: John Crispin <john@phrozen.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14896/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-16 09:40:06 +0300