summaryrefslogtreecommitdiff
path: root/arch/mips/include/asm
AgeCommit message (Collapse)AuthorFilesLines
2019-07-04Merge tag 'v5.1.16' into dev-5.1dev-5.1Joel Stanley1-0/+30
This is the 5.1.16 stable release Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-07-03irqchip/mips-gic: Use the correct local interrupt map registersPaul Burton1-0/+30
commit 6d4d367d0e9ffab4d64a3436256a6a052dc1195d upstream. The MIPS GIC contains a block of registers used to map local interrupts to a particular CPU interrupt pin. Since these registers are found at a consecutive range of addresses we access them using an index, via the (read|write)_gic_v[lo]_map accessor functions. We currently use values from enum mips_gic_local_interrupt as those indices. Unfortunately whilst enum mips_gic_local_interrupt provides the correct offsets for bits in the pending & mask registers, the ordering of the map registers is subtly different... Compared with the ordering of pending & mask bits, the map registers move the FDC from the end of the list to index 3 after the timer interrupt. As a result the performance counter & software interrupts are therefore at indices 4-6 rather than indices 3-5. Notably this causes problems with performance counter interrupts being incorrectly mapped on some systems, and presumably will also cause problems for FDC interrupts. Introduce a function to map from enum mips_gic_local_interrupt to the index of the corresponding map register, and use it to ensure we access the map registers for the correct interrupts. Signed-off-by: Paul Burton <paul.burton@mips.com> Fixes: a0dc5cb5e31b ("irqchip: mips-gic: Simplify gic_local_irq_domain_map()") Fixes: da61fcf9d62a ("irqchip: mips-gic: Use irq_cpu_online to (un)mask all-VP(E) IRQs") Reported-and-tested-by: Archer Yan <ayan@wavecomp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: stable@vger.kernel.org # v4.14+ Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-02treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner60-300/+60
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> (cherry picked from commit 2874c5fd284268364ece81a7bd936f3c8168e567) Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-06-25MIPS: mark ginvt() as __always_inlineMasahiro Yamada1-1/+1
[ Upstream commit 6074c33c6b2eabc70867ef76d57ca256e9ea9da7 ] To meet the 'i' (immediate) constraint for the asm operands, this function must be always inlined. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-05syscalls: Remove start and number from syscall_get_arguments() argsSteven Rostedt (Red Hat)1-1/+2
At Linux Plumbers, Andy Lutomirski approached me and pointed out that the function call syscall_get_arguments() implemented in x86 was horribly written and not optimized for the standard case of passing in 0 and 6 for the starting index and the number of system calls to get. When looking at all the users of this function, I discovered that all instances pass in only 0 and 6 for these arguments. Instead of having this function handle different cases that are never used, simply rewrite it to return the first 6 arguments of a system call. This should help out the performance of tracing system calls by ptrace, ftrace and perf. Link: http://lkml.kernel.org/r/20161107213233.754809394@goodmis.org Cc: Oleg Nesterov <oleg@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Dave Martin <dave.martin@arm.com> Cc: "Dmitry V. Levin" <ldv@altlinux.org> Cc: x86@kernel.org Cc: linux-snps-arc@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-c6x-dev@linux-c6x.org Cc: uclinux-h8-devel@lists.sourceforge.jp Cc: linux-hexagon@vger.kernel.org Cc: linux-ia64@vger.kernel.org Cc: linux-mips@vger.kernel.org Cc: nios2-dev@lists.rocketboards.org Cc: openrisc@lists.librecores.org Cc: linux-parisc@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-riscv@lists.infradead.org Cc: linux-s390@vger.kernel.org Cc: linux-sh@vger.kernel.org Cc: sparclinux@vger.kernel.org Cc: linux-um@lists.infradead.org Cc: linux-xtensa@linux-xtensa.org Cc: linux-arch@vger.kernel.org Acked-by: Paul Burton <paul.burton@mips.com> # MIPS parts Acked-by: Max Filippov <jcmvbkbc@gmail.com> # For xtensa changes Acked-by: Will Deacon <will.deacon@arm.com> # For the arm64 bits Reviewed-by: Thomas Gleixner <tglx@linutronix.de> # for x86 Reviewed-by: Dmitry V. Levin <ldv@altlinux.org> Reported-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-03-19Merge tag 'mips_fixes_5.1_1' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Paul Burton: "A small batch of MIPS fixes for 5.1: - An interrupt masking fix for Loongson-based Lemote 2F systems (fixing a regression from v3.19) - A relocation fix for configurations in which the devicetree is stored in an ELF section (fixing a regression from v4.7) - Fix jump labels for MIPSr6 kernels where they previously could inadvertently place a control transfer instruction in a forbidden slot & take unexpected exceptions (fixing MIPSr6 support added in v4.0) - Extend an existing USB power workaround for the Netgear WNDR3400 to v2 boards in addition to the v3 ones that already used it - Remove the custom MIPS32 definition of __kernel_fsid_t to make it consistent with MIPS64 & every other architecture, in particular resolving issues for code which tries to print the val field whose type previously differed (though had identical memory layout)" * tag 'mips_fixes_5.1_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: Remove custom MIPS32 __kernel_fsid_t type mips: bcm47xx: Enable USB power on Netgear WNDR3400v2 MIPS: Fix kernel crash for R6 in jump label branch function MIPS: Ensure ELF appended dtb is relocated mips: loongson64: lemote-2f: Add IRQF_NO_SUSPEND to "cascade" irqaction.
2019-03-16Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-1/+1
Pull KVM updates from Paolo Bonzini: "ARM: - some cleanups - direct physical timer assignment - cache sanitization for 32-bit guests s390: - interrupt cleanup - introduction of the Guest Information Block - preparation for processor subfunctions in cpu models PPC: - bug fixes and improvements, especially related to machine checks and protection keys x86: - many, many cleanups, including removing a bunch of MMU code for unnecessary optimizations - AVIC fixes Generic: - memcg accounting" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (147 commits) kvm: vmx: fix formatting of a comment KVM: doc: Document the life cycle of a VM and its resources MAINTAINERS: Add KVM selftests to existing KVM entry Revert "KVM/MMU: Flush tlb directly in the kvm_zap_gfn_range()" KVM: PPC: Book3S: Add count cache flush parameters to kvmppc_get_cpu_char() KVM: PPC: Fix compilation when KVM is not enabled KVM: Minor cleanups for kvm_main.c KVM: s390: add debug logging for cpu model subfunctions KVM: s390: implement subfunction processor calls arm64: KVM: Fix architecturally invalid reset value for FPEXC32_EL2 KVM: arm/arm64: Remove unused timer variable KVM: PPC: Book3S: Improve KVM reference counting KVM: PPC: Book3S HV: Fix build failure without IOMMU support Revert "KVM: Eliminate extra function calls in kvm_get_dirty_log_protect()" x86: kvmguest: use TSC clocksource if invariant TSC is exposed KVM: Never start grow vCPU halt_poll_ns from value below halt_poll_ns_grow_start KVM: Expose the initial start value in grow_halt_poll_ns() as a module parameter KVM: grow_halt_poll_ns() should never shrink vCPU halt_poll_ns KVM: x86/mmu: Consolidate kvm_mmu_zap_all() and kvm_mmu_zap_mmio_sptes() KVM: x86/mmu: WARN if zapping a MMIO spte results in zapping children ...
2019-03-11MIPS: Fix kernel crash for R6 in jump label branch functionArcher Yan1-4/+4
Insert Branch instruction instead of NOP to make sure assembler don't patch code in forbidden slot. In jump label function, it might be possible to patch Control Transfer Instructions(CTIs) into forbidden slot, which will generate Reserved Instruction exception in MIPS release 6. Signed-off-by: Archer Yan <ayan@wavecomp.com> Reviewed-by: Paul Burton <paul.burton@mips.com> [paul.burton@mips.com: - Add MIPS prefix to subject. - Mark for stable from v4.0, which introduced r6 support, onwards.] Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org Cc: stable@vger.kernel.org # v4.0+
2019-03-10Merge tag 'dma-mapping-5.1' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds1-10/+0
Pull DMA mapping updates from Christoph Hellwig: - add debugfs support for dumping dma-debug information (Corentin Labbe) - Kconfig cleanups (Andy Shevchenko and me) - debugfs cleanups (Greg Kroah-Hartman) - improve dma_map_resource and use it in the media code - arch_setup_dma_ops / arch_teardown_dma_ops cleanups - various small cleanups and improvements for the per-device coherent allocator - make the DMA mask an upper bound and don't fail "too large" dma mask in the remaning two architectures - this will allow big driver cleanups in the following merge windows * tag 'dma-mapping-5.1' of git://git.infradead.org/users/hch/dma-mapping: (21 commits) Documentation/DMA-API-HOWTO: update dma_mask sections sparc64/pci_sun4v: allow large DMA masks sparc64/iommu: allow large DMA masks sparc64: refactor the ali DMA quirk ccio: allow large DMA masks dma-mapping: remove the DMA_MEMORY_EXCLUSIVE flag dma-mapping: remove dma_mark_declared_memory_occupied dma-mapping: move CONFIG_DMA_CMA to kernel/dma/Kconfig dma-mapping: improve selection of dma_declare_coherent availability dma-mapping: remove an incorrect __iommem annotation of: select OF_RESERVED_MEM automatically device.h: dma_mem is only needed for HAVE_GENERIC_DMA_COHERENT mfd/sm501: depend on HAS_DMA dma-mapping: add a kconfig symbol for arch_teardown_dma_ops availability dma-mapping: add a kconfig symbol for arch_setup_dma_ops availability dma-mapping: move debug configuration options to kernel/dma dma-debug: add dumping facility via debugfs dma: debug: no need to check return value of debugfs_create functions videobuf2: replace a layering violation with dma_map_resource dma-mapping: don't BUG when calling dma_map_resource on RAM ...
2019-03-06Merge branch 'timers-2038-for-linus' of ↵Linus Torvalds1-15/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull year 2038 updates from Thomas Gleixner: "Another round of changes to make the kernel ready for 2038. After lots of preparatory work this is the first set of syscalls which are 2038 safe: 403 clock_gettime64 404 clock_settime64 405 clock_adjtime64 406 clock_getres_time64 407 clock_nanosleep_time64 408 timer_gettime64 409 timer_settime64 410 timerfd_gettime64 411 timerfd_settime64 412 utimensat_time64 413 pselect6_time64 414 ppoll_time64 416 io_pgetevents_time64 417 recvmmsg_time64 418 mq_timedsend_time64 419 mq_timedreceiv_time64 420 semtimedop_time64 421 rt_sigtimedwait_time64 422 futex_time64 423 sched_rr_get_interval_time64 The syscall numbers are identical all over the architectures" * 'timers-2038-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits) riscv: Use latest system call ABI checksyscalls: fix up mq_timedreceive and stat exceptions unicore32: Fix __ARCH_WANT_STAT64 definition asm-generic: Make time32 syscall numbers optional asm-generic: Drop getrlimit and setrlimit syscalls from default list 32-bit userspace ABI: introduce ARCH_32BIT_OFF_T config option compat ABI: use non-compat openat and open_by_handle_at variants y2038: add 64-bit time_t syscalls to all 32-bit architectures y2038: rename old time and utime syscalls y2038: remove struct definition redirects y2038: use time32 syscall names on 32-bit syscalls: remove obsolete __IGNORE_ macros y2038: syscalls: rename y2038 compat syscalls x86/x32: use time64 versions of sigtimedwait and recvmmsg timex: change syscalls to use struct __kernel_timex timex: use __kernel_timex internally sparc64: add custom adjtimex/clock_adjtime functions time: fix sys_timer_settime prototype time: Add struct __kernel_timex time: make adjtime compat handling available for 32 bit ...
2019-03-05Merge tag 'mips_5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds25-615/+400
Pull MIPS updates from Paul Burton: - Support for the MIPSr6 MemoryMapID register & Global INValidate TLB (GINVT) instructions, allowing for more efficient TLB maintenance when running on a CPU such as the I6500 that supports these. - Enable huge page support for MIPS64r6. - Optimize post-DMA cache sync by removing that code entirely for kernel configurations in which we know it won't be needed. - The number of pages allocated for interrupt stacks is now calculated correctly, where before we would wastefully allocate too much memory in some configurations. - The ath79 platform migrates to devicetree. - The bcm47xx platform sees fixes for the Buffalo WHR-G54S board. - The ingenic/jz4740 platform gains support for appended devicetrees. - The cavium_octeon, lantiq, loongson32 & sgi-ip27 platforms all see cleanups as do various pieces of core architecture code. * tag 'mips_5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (66 commits) MIPS: lantiq: Remove separate GPHY Firmware loader MIPS: ingenic: Add support for appended devicetree MIPS: SGI-IP27: rework HUB interrupts MIPS: SGI-IP27: do boot CPU init later MIPS: SGI-IP27: do xtalk scanning later MIPS: SGI-IP27: use pr_info/pr_emerg and pr_cont to fix output MIPS: SGI-IP27: clean up bridge access and header files MIPS: SGI-IP27: get rid of volatile and hubreg_t MIPS: irq: Allocate accurate order pages for irq stack MIPS: dma-noncoherent: Remove bogus condition in dma_sync_phys() MIPS: eBPF: Remove REG_32BIT_ZERO_EX MIPS: eBPF: Always return sign extended 32b values MIPS: CM: Fix indentation MIPS: BCM47XX: Fix/improve Buffalo WHR-G54S support MIPS: OCTEON: program rx/tx-delay always from DT MIPS: OCTEON: delete board-specific link status MIPS: OCTEON: don't lie about interface type of CN3005 board MIPS: OCTEON: warn if deprecated link status is being used MIPS: OCTEON: add fixed-link nodes to in-kernel device tree MIPS: Delete unused flush_cache_sigtramp() ...
2019-03-05Merge tag 'spi-v5.1' of ↵Linus Torvalds1-19/+0
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "A fairly quiet release for SPI, the biggest thing is the conversion to use GPIO descriptors which is now 90% done but still needs some stragglers converting. Summary: - Support for inter-word delays - Conversion of the core and most drivers to use GPIO descriptors for GPIO controlled chip selects - New drivers for NXP FlexSPI and QuadSPI, SiFive and Spreadtrum" * tag 'spi-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (104 commits) spi: sh-msiof: Restrict bits per word to 8/16/24/32 on R-Car Gen2/3 spi: sifive: Remove redundant dev_err call in sifive_spi_probe() spi: sifive: Remove spi_master_put in sifive_spi_remove() spi: spi-gpio: fix SPI_CS_HIGH capability spi: pxa2xx: Setup maximum supported DMA transfer length spi: sifive: Add driver for the SiFive SPI controller spi: sifive: Add DT documentation for SiFive SPI controller spi: sprd: Add a prefix for SPI DMA channel macros spi: sprd: spi: sprd: Add DMA mode support dt-bindings: spi: Add the DMA properties for the SPI dma mode spi: sprd: Add the SPI irq function for the SPI DMA mode dt-bindings: spi: imx: Add an entry for the i.MX8QM compatible spi: use gpio[d]_set_value_cansleep for setting chipselect GPIO spi: gpio: Advertise support for SPI_CS_HIGH spi: sh-msiof: Replace spi_master by spi_controller spi: sh-hspi: Replace spi_master by spi_controller spi: rspi: Replace spi_master by spi_controller spi: atmel-quadspi: add support for sam9x60 qspi controller dt-bindings: spi: atmel-quadspi: QuadSPI driver for Microchip SAM9X60 spi: atmel-quadspi: add support for named peripheral clock ...
2019-03-04get rid of legacy 'get_ds()' functionLinus Torvalds1-1/+0
Every in-kernel use of this function defined it to KERNEL_DS (either as an actual define, or as an inline function). It's an entirely historical artifact, and long long long ago used to actually read the segment selector valueof '%ds' on x86. Which in the kernel is always KERNEL_DS. Inspired by a patch from Jann Horn that just did this for a very small subset of users (the ones in fs/), along with Al who suggested a script. I then just took it to the logical extreme and removed all the remaining gunk. Roughly scripted with git grep -l '(get_ds())' -- :^tools/ | xargs sed -i 's/(get_ds())/(KERNEL_DS)/' git grep -lw 'get_ds' -- :^tools/ | xargs sed -i '/^#define get_ds()/d' plus manual fixups to remove a few unusual usage patterns, the couple of inline function cases and to fix up a comment that had become stale. The 'get_ds()' function remains in an x86 kvm selftest, since in user space it actually does something relevant. Inspired-by: Jann Horn <jannh@google.com> Inspired-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-04Merge branch 'spi-5.1' into spi-nextMark Brown1-19/+0
2019-02-21KVM: Call kvm_arch_memslots_updated() before updating memslotsSean Christopherson1-1/+1
kvm_arch_memslots_updated() is at this point in time an x86-specific hook for handling MMIO generation wraparound. x86 stashes 19 bits of the memslots generation number in its MMIO sptes in order to avoid full page fault walks for repeat faults on emulated MMIO addresses. Because only 19 bits are used, wrapping the MMIO generation number is possible, if unlikely. kvm_arch_memslots_updated() alerts x86 that the generation has changed so that it can invalidate all MMIO sptes in case the effective MMIO generation has wrapped so as to avoid using a stale spte, e.g. a (very) old spte that was created with generation==0. Given that the purpose of kvm_arch_memslots_updated() is to prevent consuming stale entries, it needs to be called before the new generation is propagated to memslots. Invalidating the MMIO sptes after updating memslots means that there is a window where a vCPU could dereference the new memslots generation, e.g. 0, and incorrectly reuse an old MMIO spte that was created with (pre-wrap) generation==0. Fixes: e59dbe09f8e6 ("KVM: Introduce kvm_arch_memslots_updated()") Cc: <stable@vger.kernel.org> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-19MIPS: SGI-IP27: rework HUB interruptsThomas Bogendoerfer3-17/+8
This commit rearranges the HUB interrupt code by using MIPS_IRQ_CPU interrupt handling code and modern Linux IRQ framework features to get rid of global arrays. It also adds support for irq affinity setting. Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
2019-02-19MIPS: SGI-IP27: do boot CPU init laterThomas Bogendoerfer1-0/+1
To make use of per_cpu variables in interrupt code per_cpu_init() must be done after setup_per_cpu_areas(). This is achieved by calling it in smp_prepare_boot_cpu() via a new smp_ops method. Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
2019-02-19MIPS: SGI-IP27: clean up bridge access and header filesThomas Bogendoerfer2-118/+89
Introduced bridge_read/bridge_write/bridge_set/bridge_clr for accessing bridge register and get rid of volatile declarations. Also removed all typedefs from arch/mips/include/asm/pci/bridge.h and cleaned up language in arch/mips/pci/ops-bridge.c Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
2019-02-19MIPS: SGI-IP27: get rid of volatile and hubreg_tThomas Bogendoerfer3-66/+10
Replace hub register access with __raw_readq/__raw_writeq and get rid of hubreg_t completely. Also remove no longer (probably never used) used defines Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
2019-02-13dma-mapping: add a kconfig symbol for arch_setup_dma_ops availabilityChristoph Hellwig1-10/+0
Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Paul Burton <paul.burton@mips.com> # MIPS Acked-by: Catalin Marinas <catalin.marinas@arm.com> # arm64
2019-02-10Merge tag 'y2038-new-syscalls' of ↵Thomas Gleixner1-2/+2
git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground into timers/2038 Pull y2038 - time64 system calls from Arnd Bergmann: This series finally gets us to the point of having system calls with 64-bit time_t on all architectures, after a long time of incremental preparation patches. There was actually one conversion that I missed during the summer, i.e. Deepa's timex series, which I now updated based the 5.0-rc1 changes and review comments. The following system calls are now added on all 32-bit architectures using the same system call numbers: 403 clock_gettime64 404 clock_settime64 405 clock_adjtime64 406 clock_getres_time64 407 clock_nanosleep_time64 408 timer_gettime64 409 timer_settime64 410 timerfd_gettime64 411 timerfd_settime64 412 utimensat_time64 413 pselect6_time64 414 ppoll_time64 416 io_pgetevents_time64 417 recvmmsg_time64 418 mq_timedsend_time64 419 mq_timedreceiv_time64 420 semtimedop_time64 421 rt_sigtimedwait_time64 422 futex_time64 423 sched_rr_get_interval_time64 Each one of these corresponds directly to an existing system call that includes a 'struct timespec' argument, or a structure containing a timespec or (in case of clock_adjtime) timeval. Not included here are new versions of getitimer/setitimer and getrusage/waitid, which are planned for the future but only needed to make a consistent API rather than for correct operation beyond y2038. These four system calls are based on 'timeval', and it has not been finally decided what the replacement kernel interface will use instead. So far, I have done a lot of build testing across most architectures, which has found a number of bugs. Runtime testing so far included testing LTP on 32-bit ARM with the existing system calls, to ensure we do not regress for existing binaries, and a test with a 32-bit x86 build of LTP against a modified version of the musl C library that has been adapted to the new system call interface [3]. This library can be used for testing on all architectures supported by musl-1.1.21, but it is not how the support is getting integrated into the official musl release. Official musl support is planned but will require more invasive changes to the library. Link: https://lore.kernel.org/lkml/20190110162435.309262-1-arnd@arndb.de/T/ Link: https://lore.kernel.org/lkml/20190118161835.2259170-1-arnd@arndb.de/ Link: https://git.linaro.org/people/arnd/musl-y2038.git/ [2]
2019-02-10Merge tag 'y2038-syscall-cleanup' of ↵Thomas Gleixner1-13/+0
git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground into timers/2038 Pull preparatory work for y2038 changes from Arnd Bergmann: System call unification and cleanup The system call tables have diverged a bit over the years, and a number of the recent additions never made it into all architectures, for one reason or another. This is an attempt to clean it up as far as we can without breaking compatibility, doing a number of steps: - Add system calls that have not yet been integrated into all architectures but that we definitely want there. This includes {,f}statfs64() and get{eg,eu,g,p,u,pp}id() on alpha, which have been missing traditionally. - The s390 compat syscall handling is cleaned up to be more like what we do on other architectures, while keeping the 31-bit pointer extension. This was merged as a shared branch by the s390 maintainers and is included here in order to base the other patches on top. - Add the separate ipc syscalls on all architectures that traditionally only had sys_ipc(). This version is done without support for IPC_OLD that is we have in sys_ipc. The new semtimedop_time64 syscall will only be added here, not in sys_ipc - Add syscall numbers for a couple of syscalls that we probably don't need everywhere, in particular pkey_* and rseq, for the purpose of symmetry: if it's in asm-generic/unistd.h, it makes sense to have it everywhere. I expect that any future system calls will get assigned on all platforms together, even when they appear to be specific to a single architecture. - Prepare for having the same system call numbers for any future calls. In combination with the generated tables, this hopefully makes it easier to add new calls across all architectures together. All of the above are technically separate from the y2038 work, but are done as preparation before we add the new 64-bit time_t system calls everywhere, providing a common baseline set of system calls. I expect that glibc and other libraries that want to use 64-bit time_t will require linux-5.1 kernel headers for building in the future, and at a much later point may also require linux-5.1 or a later version as the minimum kernel at runtime. Having a common baseline then allows the removal of many architecture or kernel version specific workarounds.
2019-02-08MIPS: OCTEON: program rx/tx-delay always from DTAaro Koskinen1-12/+0
Program rx/tx-delay always from DT. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org
2019-02-07MIPS: Delete unused flush_cache_sigtramp()Paul Burton1-2/+0
Commit adcc81f148d7 ("MIPS: math-emu: Write-protect delay slot emulation pages") left flush_cache_sigtramp() unused. Delete the dead code. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: linux-mips@vger.kernel.org
2019-02-07y2038: rename old time and utime syscallsArnd Bergmann1-2/+2
The time, stime, utime, utimes, and futimesat system calls are only used on older architectures, and we do not provide y2038 safe variants of them, as they are replaced by clock_gettime64, clock_settime64, and utimensat_time64. However, for consistency it seems better to have the 32-bit architectures that still use them call the "time32" entry points (leaving the traditional handlers for the 64-bit architectures), like we do for system calls that now require two versions. Note: We used to always define __ARCH_WANT_SYS_TIME and __ARCH_WANT_SYS_UTIME and only set __ARCH_WANT_COMPAT_SYS_TIME and __ARCH_WANT_SYS_UTIME32 for compat mode on 64-bit kernels. Now this is reversed: only 64-bit architectures set __ARCH_WANT_SYS_TIME/UTIME, while we need __ARCH_WANT_SYS_TIME32/UTIME32 for 32-bit architectures and compat mode. The resulting asm/unistd.h changes look a bit counterintuitive. This is only a cleanup patch and it should not change any behavior. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-02-07syscalls: remove obsolete __IGNORE_ macrosArnd Bergmann1-13/+0
These are all for ignoring the lack of obsolete system calls, which have been marked the same way in scripts/checksyscall.sh, so these can be removed. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-02-07MIPS: Fix set_pte() for Netlogic XLR using cmpxchg64()Paul Burton2-6/+102
Commit 46011e6ea392 ("MIPS: Make set_pte() SMP safe.") introduced an open-coded version of cmpxchg() within set_pte(), that always operated on a value the size of an unsigned long. That is, it used ll/sc instructions when CONFIG_32BIT=y or lld/scd instructions when CONFIG_64BIT=y. This was broken for configurations in which pte_t is larger than an unsigned long (with the exception of XPA configurations which have a different implementation of set_pte()), because we no longer update the whole PTE. Indeed commit 46011e6ea392 ("MIPS: Make set_pte() SMP safe.") notes: > The case of CONFIG_64BIT_PHYS_ADDR && CONFIG_CPU_MIPS32 is *not* > handled. In practice this affects Netlogic XLR/XLS systems including nlm_xlr_defconfig. Commit 82f4f66ddf11 ("MIPS: Remove open-coded cmpxchg() in set_pte()") then replaced this open-coded version of cmpxchg() with an actual call to cmpxchg(). Unfortunately the configurations mentioned above then fail to build because cmpxchg() can only operate on values 32 bits or smaller in size, resulting in: arch/mips/include/asm/cmpxchg.h:166:11: error: call to '__cmpxchg_called_with_bad_pointer' declared with attribute error: Bad argument size for cmpxchg One option that would fix the build failure & restore the previous behaviour would be to cast the pte pointer to a pointer to unsigned long, so that cmpxchg() would operate on just 32 bits of the PTE as it has been since commit 46011e6ea392 ("MIPS: Make set_pte() SMP safe."). That feels like an ugly hack though, and the behaviour of set_pte() is likely a little broken. Instead we take advantage of the fact that the affected configurations already know at compile time that the CPU will support 64 bits (ie. have hardcoded cpu_has_64bits in cpu-feature-overrides.h) in order to allow cmpxchg64() to be used in these configurations. set_pte() then makes use of cmpxchg64() when necessary. Signed-off-by: Paul Burton <paul.burton@mips.com> Fixes: 46011e6ea392 ("MIPS: Make set_pte() SMP safe.") Fixes: 82f4f66ddf11 ("MIPS: Remove open-coded cmpxchg() in set_pte()")
2019-02-04MIPS: Remove open-coded cmpxchg() in set_pte()Paul Burton1-43/+2
set_pte() contains an open coded version of cmpxchg() - it atomically replaces the buddy pte's value if it is currently zero. Simplify the code considerably by just using cmpxchg() instead of reinventing it. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org
2019-02-04MIPS: MemoryMapID (MMID) SupportPaul Burton5-5/+73
Introduce support for using MemoryMapIDs (MMIDs) as an alternative to Address Space IDs (ASIDs). The major difference between the two is that MMIDs are global - ie. an MMID uniquely identifies an address space across all coherent CPUs. In contrast ASIDs are non-global per-CPU IDs, wherein each address space is allocated a separate ASID for each CPU upon which it is used. This global namespace allows a new GINVT instruction be used to globally invalidate TLB entries associated with a particular MMID across all coherent CPUs in the system, removing the need for IPIs to invalidate entries with separate ASIDs on each CPU. The allocation scheme used here is largely borrowed from arm64 (see arch/arm64/mm/context.c). In essence we maintain a bitmap to track available MMIDs, and MMIDs in active use at the time of a rollover to a new MMID version are preserved in the new version. The allocation scheme requires efficient 64 bit atomics in order to perform reasonably, so this support depends upon CONFIG_GENERIC_ATOMIC64=n (ie. currently it will only be included in MIPS64 kernels). The first, and currently only, available CPU with support for MMIDs is the MIPS I6500. This CPU supports 16 bit MMIDs, and so for now we cap our MMIDs to 16 bits wide in order to prevent the bitmap growing to absurd sizes if any future CPU does implement 32 bit MMIDs as the architecture manuals suggest is recommended. When MMIDs are in use we also make use of GINVT instruction which is available due to the global nature of MMIDs. By executing a sequence of GINVT & SYNC 0x14 instructions we can avoid the overhead of an IPI to each remote CPU in many cases. One complication is that GINVT will invalidate wired entries (in all cases apart from type 0, which targets the entire TLB). In order to avoid GINVT invalidating any wired TLB entries we set up, we make sure to create those entries using a reserved MMID (0) that we never associate with any address space. Also of note is that KVM will require further work in order to support MMIDs & GINVT, since KVM is involved in allocating IDs for guests & in configuring the MMU. That work is not part of this patch, so for now when MMIDs are in use KVM is disabled. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org
2019-02-04MIPS: Add GINVT instruction helpersPaul Burton3-0/+82
Add a family of ginvt_* functions making it easy to emit a GINVT instruction to globally invalidate TLB entries. We make use of the _ASM_MACRO infrastructure to support emitting the instructions even if the assembler isn't new enough to support them natively. An associated STYPE_GINV definition & sync_ginv() function are added to emit a sync instruction of type 0x14, which operates as a completion barrier for these new GINVT (and GINVI) instructions. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org
2019-02-04MIPS: mm: Add set_cpu_context() for ASID assignmentsPaul Burton1-3/+13
When we gain MMID support we'll be storing MMIDs as atomic64_t values and accessing them via atomic64_* functions. This necessitates that we don't use cpu_context() as the left hand side of an assignment, ie. as a modifiable lvalue. In preparation for this introduce a new set_cpu_context() function & replace all assignments with cpu_context() on their left hand side with an equivalent call to set_cpu_context(). To enforce that cpu_context() should not be used for assignments, we rewrite it as a static inline function. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org
2019-02-04MIPS: mm: Unify ASID version checksPaul Burton1-5/+3
Introduce a new check_mmu_context() function to check an mm's ASID version & get a new one if it's outdated, and a check_switch_mmu_context() function which additionally sets up the new ASID & page directory. Simplify switch_mm() & various get_new_mmu_context() callsites in MIPS KVM by making use of the new functions, which will help reduce the amount of code that requires modification to gain MMID support. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org
2019-02-04MIPS: mm: Un-inline get_new_mmu_contextPaul Burton1-19/+1
In preparation for adding MMID support to get_new_mmu_context() which will increase the size of the function somewhat, move it from asm/mmu_context.h into a C file. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org
2019-02-04MIPS: mm: Remove local_flush_tlb_mm()Paul Burton1-2/+3
All 3 variants of local_flush_tlb_mm() are now effectively simple calls to drop_mmu_context(). Remove them and use drop_mmu_context() directly. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org
2019-02-04MIPS: mm: Move drop_mmu_context() comment into appropriate blockPaul Burton1-5/+5
drop_mmu_context() is preceded by a comment indicating what happens if the mm provided is currently active on the local CPU. Move that comment into the block that executes in this case, adjusting slightly to reflect its new location. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org
2019-02-04MIPS: mm: Consolidate drop_mmu_context() has-ASID checksPaul Burton1-1/+3
If an mm does not have an ASID on the local CPU then drop_mmu_context() is always redundant, since there's no context to "drop". Various callers of drop_mmu_context() check whether the mm has been allocated an ASID before making the call. Move that check into drop_mmu_context() and remove it from callers to simplify them. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org
2019-02-04MIPS: mm: Avoid HTW stop/start when dropping an inactive mmPaul Burton1-2/+3
If drop_mmu_context() is called with an mm that is not currently active on the local CPU then there's no need for us to stop & start a hardware page table walker because it can't be fetching entries for the ASID corresponding to the mm we're operating on. Move the htw_stop() & htw_start() calls into the block which we run only if the mm is currently active, in order to avoid the redundant work. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org
2019-02-04MIPS: mm: Remove redundant get_new_mmu_context() cpu argumentPaul Burton1-4/+8
get_new_mmu_context() accepts a cpu argument, but implicitly assumes that this is always equal to smp_processor_id() by operating on the local CPU's TLB & icache. Remove the cpu argument and have get_new_mmu_context() call smp_processor_id() instead. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org
2019-02-04MIPS: mm: Remove redundant drop_mmu_context() cpu argumentPaul Burton1-1/+3
The drop_mmu_context() function accepts a cpu argument, but it implicitly expects that this is always equal to smp_processor_id() by allocating & configuring an ASID on the local CPU when the mm is active on the CPU indicated by the cpu argument. All callers do provide the value of smp_processor_id() to the cpu argument. Remove the redundant argument and have drop_mmu_context() call smp_processor_id() itself, making it clearer that the cpu variable always represents the local CPU. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org
2019-02-04MIPS: mm: Define activate_mm() using switch_mm()Paul Burton1-27/+1
MIPS has separate definitions of activate_mm() & switch_mm() which are identical apart from switch_mm() checking that the ASID is valid before acquiring a new one. We know that when activate_mm() is called cpu_context(X, mm) will be zero, and this will never be considered a valid ASID because we never allow the ASID version number to be zero, instead beginning with version 1 using asid_first_version(). Therefore switch_mm() will always allocate a new ASID when called for a new task, meaning that it will behave identically to activate_mm(). Take advantage of this to remove the duplication & define activate_mm() using switch_mm() just like many other architectures do. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org
2019-02-04MIPS: Loongson: Introduce and use loongson_llsc_mb()Huacai Chen5-0/+52
On the Loongson-2G/2H/3A/3B there is a hardware flaw that ll/sc and lld/scd is very weak ordering. We should add sync instructions "before each ll/lld" and "at the branch-target between ll/sc" to workaround. Otherwise, this flaw will cause deadlock occasionally (e.g. when doing heavy load test with LTP). Below is the explaination of CPU designer: "For Loongson 3 family, when a memory access instruction (load, store, or prefetch)'s executing occurs between the execution of LL and SC, the success or failure of SC is not predictable. Although programmer would not insert memory access instructions between LL and SC, the memory instructions before LL in program-order, may dynamically executed between the execution of LL/SC, so a memory fence (SYNC) is needed before LL/LLD to avoid this situation. Since Loongson-3A R2 (3A2000), we have improved our hardware design to handle this case. But we later deduce a rarely circumstance that some speculatively executed memory instructions due to branch misprediction between LL/SC still fall into the above case, so a memory fence (SYNC) at branch-target (if its target is not between LL/SC) is needed for Loongson 3A1000, 3B1500, 3A2000 and 3A3000. Our processor is continually evolving and we aim to to remove all these workaround-SYNCs around LL/SC for new-come processor." Here is an example: Both cpu1 and cpu2 simutaneously run atomic_add by 1 on same atomic var, this bug cause both 'sc' run by two cpus (in atomic_add) succeed at same time('sc' return 1), and the variable is only *added by 1*, sometimes, which is wrong and unacceptable(it should be added by 2). Why disable fix-loongson3-llsc in compiler? Because compiler fix will cause problems in kernel's __ex_table section. This patch fix all the cases in kernel, but: +. the fix at the end of futex_atomic_cmpxchg_inatomic is for branch-target of 'bne', there other cases which smp_mb__before_llsc() and smp_llsc_mb() fix the ll and branch-target coincidently such as atomic_sub_if_positive/ cmpxchg/xchg, just like this one. +. Loongson 3 does support CONFIG_EDAC_ATOMIC_SCRUB, so no need to touch edac.h +. local_ops and cmpxchg_local should not be affected by this bug since only the owner can write. +. mips_atomic_set for syscall.c is deprecated and rarely used, just let it go Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Huang Pei <huangpei@loongson.cn> [paul.burton@mips.com: - Simplify the addition of -mno-fix-loongson3-llsc to cflags, and add a comment describing why it's there. - Make loongson_llsc_mb() a no-op when CONFIG_CPU_LOONGSON3_WORKAROUNDS=n, rather than a compiler memory barrier. - Add a comment describing the bug & how loongson_llsc_mb() helps in asm/barrier.h.] Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: ambrosehua@gmail.com Cc: Steven J . Hill <Steven.Hill@cavium.com> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: Li Xuefeng <lixuefeng@loongson.cn> Cc: Xu Chenghua <xuchenghua@loongson.cn>
2019-01-29MIPS: OCTEON: delete unused cvmx-smix-defs.hAaro Koskinen1-276/+0
Delete unused cvmx-smix-defs.h. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org
2019-01-23MIPS: remove meaningless generic-(CONFIG_GENERIC_CSUM) += checksum.hMasahiro Yamada1-1/+0
This line is weird in multiple ways. (CONFIG_GENERIC_CSUM) might be a typo of $(CONFIG_GENERIC_CSUM). Even if you add '$' to it, $(CONFIG_GENERIC_CSUM) is never evaluated to 'y' because scripts/Makefile.asm-generic does not include include/config/auto.conf. So, the asm-generic wrapper of checksum.h is never generated. Even if you manage to generate it, it is never included by anyone because MIPS has the checkin header with the same file name: arch/mips/include/asm/checksum.h As you see in the top Makefile, the checkin headers are included before generated ones. LINUXINCLUDE := \ -I$(srctree)/arch/$(SRCARCH)/include \ -I$(objtree)/arch/$(SRCARCH)/include/generated \ ... Commit 4e0748f5beb9 ("MIPS: Use generic checksum functions for MIPS R6") already added the asm-generic fallback code in the checkin header: #ifdef CONFIG_GENERIC_CSUM #include <asm/generic/checksum.h> #else ... #endif Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-kernel@vger.kernel.org
2019-01-23MIPS: Loongson32: workaround di issueJiaxun Yang1-1/+1
GS232 core used in Loongson-1 processors has a bug that di instruction doesn't save the irqflag immediately. Workaround by set irqflag in CP0 before di instructions as same as Loongson-3. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org Cc: keguang.zhang@gmail.com
2019-01-22MIPS: ath79: drop legacy IRQ codeJohn Crispin1-4/+0
With the target now being fully OF based, we can drop the legacy IRQ code. All IRQs are now handled via the new irqchip drivers. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: Felix Fietkau <nbd@nbd.name>
2019-01-22MIPS: Loongson32: Remove unused platform devicesJiaxun Yang1-4/+0
platform.c contains several unused platform device with no drivers submited. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org Cc: keguang.zhang@gmail.com
2019-01-17spi: ath79: Enable support for compile testAlban Bedel1-19/+0
To allow building this driver in compile test we need to remove all dependency on headers from arch/mips/include. To allow this we explicitly define all the registers locally instead of using ar71xx_regs.h and we move the platform data struct definition to include/linux/platform_data/spi-ath79.h. Signed-off-by: Alban Bedel <albeu@free.fr> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-08MIPS: lantiq: Use CP0_LEGACY_COMPARE_IRQHauke Mehrtens2-4/+0
Instead of using the lantiq specific MIPS_CPU_TIMER_IRQ use the generic CP0_LEGACY_COMPARE_IRQ constant for the timer interrupt number. MIPS_CPU_TIMER_IRQ was already defined to 7 for both supported SoC families. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: jhogan@kernel.org Cc: ralf@linux-mips.org Cc: john@phrozen.org Cc: linux-mips@linux-mips.org Cc: linux-mips@vger.kernel.org
2019-01-05Merge tag 'mips_fixes_4.21_1' of ↵Linus Torvalds4-20/+4
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Paul Burton: "A few early MIPS fixes for 4.21: - The Broadcom BCM63xx platform sees a fix for resetting the BCM6368 ethernet switch, and the removal of a platform device we've never had a driver for. - The Alchemy platform sees a few fixes for bitrot that occurred within the past few cycles. - We now enable vectored interrupt support for the MediaTek MT7620 SoC, which makes sense since they're supported by the SoC but in this case also works around a bug relating to the location of exception vectors when using a recent version of U-Boot. - The atomic64_fetch_*_relaxed() family of functions see a fix for a regression in MIPS64 kernels since v4.19. - Cavium Octeon III CN7xxx systems will now disable their RGMII interfaces rather than attempt to enable them & warn about the lack of support for doing so, as they did since initial CN7xxx ethernet support was added in v4.7. - The Microsemi/Microchip MSCC SoCs gain a MAINTAINERS entry. - .mailmap now provides consistency for Dengcheng Zhu's name & current email address" * tag 'mips_fixes_4.21_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: OCTEON: mark RGMII interface disabled on OCTEON III MIPS: Fix a R10000_LLSC_WAR logic in atomic.h MIPS: BCM63XX: drop unused and broken DSP platform device mailmap: Update name spelling and email for Dengcheng Zhu MIPS: ralink: Select CONFIG_CPU_MIPSR2_IRQ_VI on MT7620/8 MAINTAINERS: Add a maintainer for MSCC MIPS SoCs MIPS: Alchemy: update dma masks for devboard devices MIPS: Alchemy: update cpu-feature-overrides MIPS: Alchemy: drop DB1000 IrDA support bits MIPS: alchemy: cpu_all_mask is forbidden for clock event devices MIPS: BCM63XX: fix switch core reset on BCM6368
2019-01-05Merge branch 'akpm' (patches from Andrew)Linus Torvalds2-5/+3
Merge more updates from Andrew Morton: - procfs updates - various misc bits - lib/ updates - epoll updates - autofs - fatfs - a few more MM bits * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (58 commits) mm/page_io.c: fix polled swap page in checkpatch: add Co-developed-by to signature tags docs: fix Co-Developed-by docs drivers/base/platform.c: kmemleak ignore a known leak fs: don't open code lru_to_page() fs/: remove caller signal_pending branch predictions mm/: remove caller signal_pending branch predictions arch/arc/mm/fault.c: remove caller signal_pending_branch predictions kernel/sched/: remove caller signal_pending branch predictions kernel/locking/mutex.c: remove caller signal_pending branch predictions mm: select HAVE_MOVE_PMD on x86 for faster mremap mm: speed up mremap by 20x on large regions mm: treewide: remove unused address argument from pte_alloc functions initramfs: cleanup incomplete rootfs scripts/gdb: fix lx-version string output kernel/kcov.c: mark write_comp_data() as notrace kernel/sysctl: add panic_print into sysctl panic: add options to print system info when panic happens bfs: extra sanity checking and static inode bitmap exec: separate MM_ANONPAGES and RLIMIT_STACK accounting ...
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-15 18:17:09 +0300