summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)AuthorFilesLines
2010-04-27Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds34-124/+113
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (39 commits) omap: delete unused bootloader tag variables omap: Devkit8000: Remove unused pins omap: Devkit8000: Change position of init calls omap: Devkit8000: Remove unnecessary include file omap: Devkit8000: Fix typo in pin name omap: Devkit8000: Add missing package selection omap: Devkit8000: Fix typo in supplies n8x0_defconfig: remove CONFIG_NILFS2_FS override omap: board-sdp-flash.c: Fix typos in debug output omap4: Fix McBSP4 base address omap: rx51_defconfig: Remove CONFIG_SYSFS_DEPRECATED*=y options omap: rx51_defconfig: Remove duplicate phonet omap: fix a gpmc nand problem AM3517: initialize i2c subsystem after mux subsystem omap: remove one of the define of INT_34XX_BENCH_MPU_EMUL omap: fix the compile error if CONFIG_MTD_NAND_OMAP2 is notenabled OMAP4: Clocks: Change SPI Instance Names omap: Devkit8000: Fix wrong usb port on Devkit8000 OMAP4: Fix for CONTROL register Base OMAP4-HSMMC: FIX for MMC5 Controller IRQ Base ...
2010-04-24omap: delete unused bootloader tag variablesAaro Koskinen1-3/+0
They are not needed and add over 512 bytes to kernel data. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-24omap: Devkit8000: Remove unused pinsThomas Weber1-20/+0
Old code from original patch contains beagle board pins that are not available on the Devkit8000. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-24omap: Devkit8000: Change position of init callsThomas Weber1-4/+4
Change position of calling serial and ethernet initialization. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-24omap: Devkit8000: Remove unnecessary include fileThomas Weber1-1/+0
Remove include otg.h. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-24omap: Devkit8000: Fix typo in pin nameThomas Weber1-2/+2
Replace wrong sdr_cke[01] with sdrc_cke[01]. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-24omap: Devkit8000: Add missing package selectionThomas Weber1-2/+4
Devkit8000 uses the CUS package for OMAP3530. This patch adds missing package selection for CUS and enables CONFIG_MUX. Replace whitespace with tab in Kconfig. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-24omap: Devkit8000: Fix typo in suppliesThomas Weber1-1/+1
Replace wrong vdss_dsi with vdds_dsi. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-24n8x0_defconfig: remove CONFIG_NILFS2_FS overrideFrancisco Alecrim1-1/+0
arch/arm/configs/n8x0_defconfig:1061:warning: override: reassigning to symbol NILFS2_FS Signed-off-by: Francisco Alecrim <francisco.alecrim@openbossa.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-24omap: board-sdp-flash.c: Fix typos in debug outputThomas Weber1-4/+4
Corrected type of flash in output (OneNAND => NOR). Removed whitespace after newline in output. Removed double whitespace in output. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-24omap4: Fix McBSP4 base addressSantosh Shilimkar1-1/+1
This patch fixes the McBSP4 base address for OMAP4 Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-24omap: rx51_defconfig: Remove CONFIG_SYSFS_DEPRECATED*=y optionsJarkko Nikula1-2/+0
Modern udev will not work with the CONFIG_SYSFS_DEPRECATED*=y options and it seems also that the Maemo release works without when testing with the Maemo 2.6.28 kernel. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-24omap: rx51_defconfig: Remove duplicate phonetJarkko Nikula1-1/+0
Phonet is enabled by the commit bce54fed941e03695ab557100a4bd1e457abca42 and this duplicate gives a warning when doing make rx51_defconfig. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-24omap: fix a gpmc nand problemstanley.miao1-0/+3
If gpmc_t isn't given, we don't need to set timing for gpmc, or it will cause a Oops. Signed-off-by: Stanley.Miao <stanley.miao@windriver.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-24AM3517: initialize i2c subsystem after mux subsystemstanley.miao1-2/+2
The initialize of i2c subsystem will set pinmux, so it should be done after the initialize of mux subsystem initialization. Signed-off-by: Stanley.Miao <stanley.miao@windriver.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-24omap: remove one of the define of INT_34XX_BENCH_MPU_EMULstanley.miao1-2/+0
INT_34XX_BENCH_MPU_EMUL was defined twice, another is at Line 312. Signed-off-by: Stanley.Miao <stanley.miao@windriver.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-24omap: fix the compile error if CONFIG_MTD_NAND_OMAP2 is notenabledstanley.miao1-0/+7
If CONFIG_MTD_NAND_OMAP2 is not enabled, there will be a compile error, "gpmc_nand_init() is not defined". Add a inline noop function to fix it. Signed-off-by: Stanley.Miao <stanley.miao@windriver.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-24OMAP4: Clocks: Change SPI Instance NamesAbraham Arce1-4/+4
Change the name for the spi instances on omap44xx_clks to match the names omap2 spi driver gives: omap-mcspi.1 -> omap2_mcspi.1 omap-mcspi.2 -> omap2_mcspi.2 omap-mcspi.3 -> omap2_mcspi.3 omap-mcspi.4 -> omap2_mcspi.4 Signed-off-by: Abraham Arce <x0066660@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-24omap: Devkit8000: Fix wrong usb port on Devkit8000Thomas Weber1-2/+2
Disable the nonexistent ehci port on Devkit8000. Signed-off-by: Thomas Weber <weber@corscience.de> Acked-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-24OMAP4: Fix for CONTROL register BaseSantosh Shilimkar1-1/+1
This patch fixes the base address of CONTROL register on OMAP4430SDP. The control base is used by peripherals like MMC1 for PBIAS configuration. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-24OMAP4-HSMMC: FIX for MMC5 Controller IRQ Basekishore kadiyala1-1/+1
This patch fixes HSMMC Controller5 IRQ Base. Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-24omap3: Fix EHCI port for IGEP v2 boardEnric Balletbo i Serra1-4/+4
IGEP v2 uses EHCI port 1 instead of EHCI port 2. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Acked-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-24omap: Fix n8x0 mmc_mmc_init compile warnings and typosTony Lindgren1-9/+9
Fix warning: 'return' with a value, in function returning void in n8x0_mmc_init. Also fix a search and replace typo. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-24omap2: Fix ARM processor check for 24xxTony Lindgren1-1/+1
The value to check is 7 for V6 instead. The code has been working as it falls through to 24xx code if the other checks fail. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-24omap4: Fix build break when used with gcc-4.4.1 (2009-q3)Richard Woodruff2-4/+4
This patch adds argument to smc calls as gcc-4.4.1 requires it otherwise the build breaks with 2009-q3 toolchanin. arch/arm/mach-omap2/omap-headsmp.S: Assembler messages: arch/arm/mach-omap2/omap-headsmp.S:36: Error: missing expression -- `smc' arch/arm/mach-omap2/omap-headsmp.S:55: Error: missing expression -- `smc' arch/arm/mach-omap2/omap-headsmp.S:63: Error: missing expression -- `smc' make[1]: *** [arch/arm/mach-omap2/omap-headsmp.o] Error 1 Signed-off-by: Richard Woodruff <r-woodruff2@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: DMA: Init CDAC to zeromanjugk manjugk1-0/+9
The register DMA4_CDAC needs to be initialized to zero before starting DMA transfer. Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Govindraj R <govindraj.raja@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Reported-by:S, Venkatraman <svenkatr@ti.com> Signed-off-by: Manjunatha GK <manjugk@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: gpio: fix incorrect matching of IRQ_TYPE_EDGE_BOTHJanusz Krzysztofik1-3/+3
Since IRQ_TYPE_EDGE_BOTH is defined as (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING), testing against it with a bitwise AND also matches both single-edge cases in addition to the intended both edges case. Fix it, replacing with a more accurate expression. Created and tested againts linux-2.6.34-rc3. Applicable to 2.6.33-stable as well. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23arm: omap1: remove dead code from timer32k.cFelipe Balbi1-15/+0
Trivial patch, no functional changes Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: fix clocksource_32k to start from zeroAaro Koskinen1-5/+14
When the 32k sync timer is used for sched_clock(), it should count time from the kernel boot (clocksource init) instead of the last HW reset. Otherwise printk.time values will jump suddenly during the boot: [ 0.000000] calling omap2_clk_arch_init+0x0/0x138 @ 1 [ 0.000000] initcall omap2_clk_arch_init+0x0/0x138 returned -22 after 0 usecs [ 0.000000] initcall omap2_clk_arch_init+0x0/0x138 returned with error code -22 [ 0.000000] calling omap_init_clocksource_32k+0x0/0x98 @ 1 [ 508.697937] initcall omap_init_clocksource_32k+0x0/0x98 returned 0 after 0 usecs [ 508.697967] calling omap_init_devices+0x0/0x38 @ 1 [ 508.698425] initcall omap_init_devices+0x0/0x38 returned 0 after 0 usecs This will confuse tools such as scripts/bootgraph.pl. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-22Merge branch 'for_2.6.34rc_a' of git://git.pwsan.com/linux-2.6 into ↵Tony Lindgren17-39/+113
omap-fixes-for-linus
2010-04-14ARM: 5974/1: arm/mach-at91 Makefile: remove two blanks.Ernst Schwab1-2/+2
Cosmetic change to mach-at91 Makefile: remove two blanks introduced by earlier patches. Signed-off-by: Ernst Schwab <eschwab@online.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-14ARM: 6052/1: kdump: make kexec work in interrupt contextMika Westerberg1-4/+6
When crash happens in interrupt context there is no userspace context. We always use current->active_mm in those cases. Signed-off-by: Mika Westerberg <ext-mika.1.westerberg@nokia.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-14ARM: 6051/1: VFP: preserve the HW context when calling signal handlersImre Deak3-17/+111
From: Imre Deak <imre.deak@nokia.com> Signal handlers can use floating point, so prevent them to corrupt the main thread's VFP context. So far there were two signal stack frame formats defined based on the VFP implementation, but the user struct used for ptrace covers all posibilities, so use it for the signal stack too. Introduce also a new user struct for VFP exception registers. In this too fields not relevant to the current VFP architecture are ignored. Support to save / restore the exception registers was added by Will Deacon. Signed-off-by: Imre Deak <imre.deak@nokia.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-14ARM: 6050/1: VFP: fix the SMP versions of vfp_{sync,flush}_hwstateImre Deak1-21/+10
From: Imre Deak <imre.deak@nokia.com> Recently the UP versions of these functions were refactored and as a side effect it became possible to call them for the current thread. This isn't true for the SMP versions however, so fix this up. Signed-off-by: Imre Deak <imre.deak@nokia.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-14ARM: 6007/1: fix highmem with VIPT cache and DMANicolas Pitre6-20/+122
The VIVT cache of a highmem page is always flushed before the page is unmapped. This cache flush is explicit through flush_cache_kmaps() in flush_all_zero_pkmaps(), or through __cpuc_flush_dcache_area() in kunmap_atomic(). There is also an implicit flush of those highmem pages that were part of a process that just terminated making those pages free as the whole VIVT cache has to be flushed on every task switch. Hence unmapped highmem pages need no cache maintenance in that case. However unmapped pages may still be cached with a VIPT cache because the cache is tagged with physical addresses. There is no need for a whole cache flush during task switching for that reason, and despite the explicit cache flushes in flush_all_zero_pkmaps() and kunmap_atomic(), some highmem pages that were mapped in user space end up still cached even when they become unmapped. So, we do have to perform cache maintenance on those unmapped highmem pages in the context of DMA when using a VIPT cache. Unfortunately, it is not possible to perform that cache maintenance using physical addresses as all the L1 cache maintenance coprocessor functions accept virtual addresses only. Therefore we have no choice but to set up a temporary virtual mapping for that purpose. And of course the explicit cache flushing when unmapping a highmem page on a system with a VIPT cache now can go, which should increase performance. While at it, because the code in __flush_dcache_page() has to be modified anyway, let's also make sure the mapped highmem pages are pinned with kmap_high_get() for the duration of the cache maintenance operation. Because kunmap() does unmap highmem pages lazily, it was reported by Gary King <GKing@nvidia.com> that those pages ended up being unmapped during cache maintenance on SMP causing segmentation faults. Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-14ARM: 5975/1: AT91 slow-clock suspend: don't wait when turning PLLs offAnders Larsen1-4/+0
From: Julien Langer <julien.langer@gmail.com> AT91: when turning off the PLLs during suspend, don't wait for the lock flag to be set. Previously the code would always run into the loop limitation of 1000 iterations because the flag is never set when turning the PLLs off. Comments from Anders Larsen: (in http://marc.info/?l=linux-kernel&m=127058929724193&w=2) Signed-off-by: Julien Langer <julien.langer@gmail.com> Signed-off-by: Anders Larsen <al@alarsen.net> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-13Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds19-77/+412
* master.kernel.org:/home/rmk/linux-2.6-arm: (21 commits) ARM: Fix ioremap_cached()/ioremap_wc() for SMP platforms ARM: 6043/1: AT91 slow-clock resume: Don't wait for a disabled PLL to lock ARM: 6031/1: fix Thumb-2 decompressor ARM: 6029/1: ep93xx: gpio.c: local functions should be static ARM: 6028/1: ARM: add MAINTAINERS for U300 ARM: 6024/1: bcmring: fix missing down on semaphore in dma.c MXC: mach_armadillo5x0: Add USB Host support. ARM mach-mx3: duplicated include ARM mach-mx3: duplicated include imx31: add watchdog device on litekit board. imx3: Add watchdog platform device support MXC: mach-mx31_3ds: add support for freescale mc13783 power management device. MXC: mach-mx31_3ds: Add SPI1 device support. MXC: mach-mx31_3ds: Add support for on board NAND Flash. MXC: mach-mx31_3ds: Update variable names over recent mach name modification. imx31: fix parent clock for rtc i.MX51: remove NFC AXI static mapping i.MX51: determine silicon revision dynamically i.MX51: map TZIC dynamically i.MX51: Use correct clock for gpt ...
2010-04-09ARM: Fix ioremap_cached()/ioremap_wc() for SMP platformsRussell King1-0/+4
Write combining/cached device mappings are not setting the shared bit, which could potentially cause problems on SMP systems since the cache lines won't participate in the cache coherency protocol. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-04-09ARM: 6043/1: AT91 slow-clock resume: Don't wait for a disabled PLL to lockAnders Larsen1-0/+12
at91 slow-clock resume: Don't wait for a disabled PLL to lock. We run into this problem with the PLLB on the at91: ohci-at91 disables the PLLB when going to suspend. The slowclock code however tries to do the same: It saves the PLLB register value and when restoring the value during resume, it waits for the PLLB to lock again. However the PLL will never lock and the loop would run into its timeout because the slowclock code just stored and restored an empty register. This fixes the problem by only restoring PLLA/PLLB when they were enabled at suspend time. Cc: Andrew Victor <avictor.za@gmail.com> Signed-off-by: Anders Larsen <al@alarsen.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-08Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6Russell King14-70/+382
Conflicts: arch/arm/mach-mx3/mach-pcm037.c
2010-04-08ARM: 6031/1: fix Thumb-2 decompressorRabin Vincent1-1/+1
98e12b5a6e05413 ("ARM: Fix decompressor's kernel size estimation for ROM=y") broke the Thumb-2 decompressor because it added an entry in the LC0 table but didn't adjust the offset the Thumb-2 code uses to load the SP from that table. Fix it. Cc: stable <stable@kernel.org> Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-08ARM: 6029/1: ep93xx: gpio.c: local functions should be staticHartley Sweeten1-3/+3
The functions ep93xx_gpio_update_int_params and ep93xx_gpio_int_mask are not exported and should be static. This was overlooked when moving the code from core.c. Also, change a comment to better indicate what the code is for. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-08ARM: 6024/1: bcmring: fix missing down on semaphore in dma.cLeo Chen1-3/+10
Added missing down on the memMap->lock semaphore. Also fixed a return statement so that we always exit with an up (i.e. early exit via return is not allowed) Signed-off-by: Leo Hao Chen <leochen@broadcom.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-07Merge branch 'davinci-fixes-for-linus' of ↵Linus Torvalds4-5/+13
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci * 'davinci-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci: davinci: fix compile warning: <mach/da8xx.h>: #include <linux/platform_device.h> davinci: DM365: fix duplicate default IRQ priorities davinci: edma: clear events in edma_start() davinci: da8xx/omap-l1: fix build error when CONFIG_DAVINCI_MUX is undefined davinci: timers: don't enable timer until clocksource is initialized
2010-04-07davinci: fix compile warning: <mach/da8xx.h>: #include <linux/platform_device.h>Sergei Shtylyov1-1/+3
This hushes the following warning: arch/arm/mach-davinci/include/mach/da8xx.h:104: warning: ‘struct platform_device’ declared inside parameter list arch/arm/mach-davinci/include/mach/da8xx.h:104: warning: its scope is only this definition or declaration, which is probably not what you want Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-04-06davinci: DM365: fix duplicate default IRQ prioritiesKevin Hilman1-1/+0
IRQ 29 has two possible interrupts DDRINT and RTC, but having both in the default priority table is confusing (and triggers a warning from sparse.) This patch removes the lower priority DDRINT from the default priority table leaving the RTC setting as the default. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-04-06davinci: edma: clear events in edma_start()Brian Niebuhr1-1/+2
This patch fixes an issue where a DMA channel can erroneously process an event generated by a previous transfer. A failure case is where DMA is being used for SPI transmit and receive channels on OMAP L138. In this case there is a single bit that controls all event generation from the SPI peripheral. Therefore it is possible that between when edma_stop() has been called for the transmit channel on a previous transfer and edma_start() is called for the transmit channel on a subsequent transfer, that a transmit event has been generated. The fix is to clear events in edma_start(). This prevents false events from being processed when events are enabled for that channel. Signed-off-by: Brian Niebuhr <bniebuhr@efjohnson.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-04-06davinci: da8xx/omap-l1: fix build error when CONFIG_DAVINCI_MUX is undefinedSekhar Nori1-0/+4
The da8xx/omap-l1 boards refuse to build when CONFIG_DAVINCI_MUX is undefined because arch/arm/mach-davinci/mux.c:da8xx_pinmux_setup() is not defined. This patch fixes this issue. This is build tested with davinci_all_defconfig and da8xx_omapl_defconfig and boot tested on DA830 EVM. Reported-by: Shanmuga Sundaram Mahendran <shanmuga@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-04-06davinci: timers: don't enable timer until clocksource is initializedKevin Hilman1-2/+4
On da830, when the same timer is used for clocksource and clockevent, the timer can be started before the clockevent is registered/initialzed. This creates a window where a timer interrupt might fire before the clockevent handler has been setup and causes a crash. This patch moves the actual enable/start of the timer after the clockevent has ben registered. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-04-05Merge branch 'master' into export-slabhTejun Heo10-47/+123
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-04 00:27:29 +0300