summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)AuthorFilesLines
2021-07-01Merge branch 'dev-5.10' into dev-5.10-inteldev-5.10.46-intelJae Hyun Yoo7-56/+43
This is the 5.10.46 stable release. Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@intel.com>
2021-06-28ARM: dts: everest: Add phase corrections for eMMCAndrew Jeffery1-0/+1
The values were determined experimentally via boot tests, not by measuring the bus behaviour with a scope. We plan to do scope measurements to confirm or refine the values and will update the devicetree if necessary once these have been obtained. However, with the patch we can write and read data without issue, where as booting the system without the patch failed at the point of mounting the rootfs. OpenBMC-Staging-Count: 1 Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20210628013605.1257346-1-andrew@aj.id.au Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-28ARM: dts: tacoma: Add phase corrections for eMMCAndrew Jeffery1-0/+1
The degree values were reversed out from the magic tap values of 7 (in) and 15 + inversion (out) initially suggested by Aspeed. With the patch tacoma survives several gigabytes of reads and writes using dd while without it locks up randomly during the boot process. OpenBMC-Staging-Count: 1 Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20210625061017.1149942-1-andrew@aj.id.au Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-24Merge tag 'v5.10.46' into dev-5.10Joel Stanley3-6/+11
This is the 5.10.46 stable release Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-24ARM: dts: aspeed: p10bmc: Enable KCS channel 2Andrew Jeffery2-0/+10
Rainier uses KCS channel 2 as the source for the debug-trigger application outlined at [1] and implemented at [2]. [1] https://github.com/openbmc/docs/blob/master/designs/bmc-service-failure-debug-and-recovery.md [2] https://github.com/openbmc/debug-trigger OpenBMC-Staging-Count: 1 Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20210623033854.587464-8-andrew@aj.id.au Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-24ARM: dts: aspeed: p10bmc: Switch to KCS 3 for MCTP bindingAndrew Jeffery2-2/+2
The reset state of the status bits on KCS 4 is inappropriate for the MCTP LPC binding. Switch to KCS 3 which has a different reset behaviour. OpenBMC-Staging-Count: 1 Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20210623033854.587464-7-andrew@aj.id.au Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-24misc: Remove obsolete mctp-lpc chardevAndrew Jeffery1-1/+0
The mctp-lpc chardev is replaced (temporarily) by the raw KCS chardev. The raw chardev is required for IBM's purposes until Jeremy's socket-based MCTP patches are merged[1][2]. [1] https://github.com/openbmc/docs/blob/master/designs/mctp/mctp-kernel.md [2] https://lore.kernel.org/openbmc/f4f5fa66542401e8d5e78c1fb30153195d384b62.camel@codeconstruct.com.au/ OpenBMC-Staging-Count: 1 Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20210623033854.587464-6-andrew@aj.id.au Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-24ARM: dts: p10bmc: Drop the openbmc, mctp-lpc nodeAndrew Jeffery2-10/+12
The MCTP LPC driver was loaded by hacking up the compatible in the devicetree node for KCS 4. With the introduction of the raw KCS driver this hack is no-longer required. Use the regular compatible string for KCS 4 and configure the appropriate SerIRQ. OpenBMC-Staging-Count: 1 Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20210623033854.587464-5-andrew@aj.id.au Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-24ARM: configs: Enable IPMI KCS raw chardevAndrew Jeffery1-0/+1
The raw KCS chardev is used by libmctp's vendor-defined LPC binding. OpenBMC-Staging-Count: 1 Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20210623033854.587464-4-andrew@aj.id.au Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-24ARM: dts: aspeed: Fix AST2600 machines line namesJoel Stanley2-8/+2
Tacoma and Rainier both have a line-names array that is too long: gpio gpiochip0: gpio-line-names is length 232 but should be at most length 208 This was probably copied from an AST2500 device tree that did have more GPIOs on the controller. OpenBMC-Staging-Count: 1 Fixes: e9b24b55ca4f ("ARM: dts: aspeed: rainier: Add gpio line names") Fixes: 2f68e4e7df67 ("ARM: dts: aspeed: tacoma: Add gpio line names") Link: https://lore.kernel.org/r/20210624090742.56640-1-joel@jms.id.au Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-24ARM: dts: aspeed: Rainier remove PSU gpio-keysB. J. Wyman1-28/+0
Remove the gpio-keys entries for the power supply presence lines from the Rainier device tree. The user space applications are going to change from using libevdev to libgpiod. OpenBMC-Staging-Count: 1 Signed-off-by: B. J. Wyman <bjwyman@gmail.com> Link: https://lore.kernel.org/r/20210623230401.3050076-1-bjwyman@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-24ARM: dts: aspeed: rainier: Add eMMC clock phase compensationAndrew Jeffery1-0/+1
Determined by scope measurements at speed. OpenBMC-Staging-Count: 1 Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20201208012615.2717412-7-andrew@aj.id.au Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-23ARM: dts: aspeed: Everest PSU #3 address changeB. J. Wyman1-2/+2
The third power supply had an I2C address conflict with another device in the system. The device will have the address changed from 6Ah to 6Dh. OpenBMC-Staging-Count: 1 Signed-off-by: B. J. Wyman <bjwyman@gmail.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210610202940.3650554-1-bjwyman@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-18ARM: OMAP2+: Fix build warning when mmc_omap is not builtYongqiang Liu1-1/+1
[ Upstream commit 040ab72ee10ea88e1883ad143b3e2b77596abc31 ] GCC reports the following warning with W=1: arch/arm/mach-omap2/board-n8x0.c:325:19: warning: variable 'index' set but not used [-Wunused-but-set-variable] 325 | int bit, *openp, index; | ^~~~~ Fix this by moving CONFIG_MMC_OMAP to cover the rest codes in the n8x0_mmc_callback(). Signed-off-by: Yongqiang Liu <liuyongqiang13@huawei.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-18ARM: OMAP1: Fix use of possibly uninitialized irq variableMaciej Falkowski1-3/+7
[ Upstream commit 3c4e0147c269738a19c7d70cd32395600bcc0714 ] The current control flow of IRQ number assignment to `irq` variable allows a request of IRQ of unspecified value, generating a warning under Clang compilation with omap1_defconfig on linux-next: arch/arm/mach-omap1/pm.c:656:11: warning: variable 'irq' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] else if (cpu_is_omap16xx()) ^~~~~~~~~~~~~~~~~ ./arch/arm/mach-omap1/include/mach/soc.h:123:30: note: expanded from macro 'cpu_is_omap16xx' ^~~~~~~~~~~~~ arch/arm/mach-omap1/pm.c:658:18: note: uninitialized use occurs here if (request_irq(irq, omap_wakeup_interrupt, 0, "peripheral wakeup", ^~~ arch/arm/mach-omap1/pm.c:656:7: note: remove the 'if' if its condition is always true else if (cpu_is_omap16xx()) ^~~~~~~~~~~~~~~~~~~~~~ arch/arm/mach-omap1/pm.c:611:9: note: initialize the variable 'irq' to silence this warning int irq; ^ = 0 1 warning generated. The patch provides a default value to the `irq` variable along with a validity check. Signed-off-by: Maciej Falkowski <maciej.falkowski9@gmail.com> Link: https://github.com/ClangBuiltLinux/linux/issues/1324 Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-17ARM: config: aspeed: Enable KCS adapter for raw SerIOJoel Stanley1-1/+2
Raw SerIO is used by the OpenBMC debug-trigger application to take signals from the host that applications are unresponsive on the BMC. OpenBMC-Staging-Count: 1 Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-16Merge branch 'dev-5.10' into dev-5.10-intelJae Hyun Yoo7-6/+22
This is the 5.10.43 stable release Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@intel.com>
2021-06-16ARM: cpuidle: Avoid orphan section warningArnd Bergmann1-2/+3
commit d94b93a9101573eb75b819dee94b1417acff631b upstream. Since commit 83109d5d5fba ("x86/build: Warn on orphan section placement"), we get a warning for objects in orphan sections. The cpuidle implementation for OMAP causes this when CONFIG_CPU_IDLE is disabled: arm-linux-gnueabi-ld: warning: orphan section `__cpuidle_method_of_table' from `arch/arm/mach-omap2/pm33xx-core.o' being placed in section `__cpuidle_method_of_table' arm-linux-gnueabi-ld: warning: orphan section `__cpuidle_method_of_table' from `arch/arm/mach-omap2/pm33xx-core.o' being placed in section `__cpuidle_method_of_table' arm-linux-gnueabi-ld: warning: orphan section `__cpuidle_method_of_table' from `arch/arm/mach-omap2/pm33xx-core.o' being placed in section `__cpuidle_method_of_table' Change the definition of CPUIDLE_METHOD_OF_DECLARE() to silently drop the table and all code referenced from it when CONFIG_CPU_IDLE is disabled. Fixes: 06ee7a950b6a ("ARM: OMAP2+: pm33xx-core: Add cpuidle_ops for am335x/am437x") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Miguel Ojeda <ojeda@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20201230155506.1085689-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-10Merge tag 'v5.10.43' into dev-5.10Joel Stanley5-4/+20
This is the 5.10.43 stable release Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-10ARM: config: aspeed: Enable hardened allocator featureJoel Stanley2-2/+2
SLAB_FREELIST_HARDENED can protect from freelist overwrite attacks with really small overhead. It works best with the SLUB allocator, so make SLUB the default by removing SLAB=y. total used free shared buff/cache available SLAB 425596 44065.3+/-220 311099+/-3800 14864+/-3900 70432+/-3700 352767+/-3900 SLUB 425592 44225.3+/-280 313275+/-600 12132+/-3.3 68092+/-530 355295+/-280 These figures are the average memory usage from three boots of each option in qemu, running the Romulus userspace. The output is from free(1), reported in kilobytes. OpenBMC-Staging-Count: 1 Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-10ARM: dts: imx6q-dhcom: Add PU,VDD1P1,VDD2P5 regulatorsMarek Vasut1-0/+12
commit 8967b27a6c1c19251989c7ab33c058d16e4a5f53 upstream. Per schematic, both PU and SOC regulator are supplied from LTC3676 SW1 via VDDSOC_IN rail, add the PU input. Both VDD1P1, VDD2P5 are supplied from LTC3676 SW2 via VDDHIGH_IN rail, add both inputs. While no instability or problems are currently observed, the regulators should be fully described in DT and that description should fully match the hardware, else this might lead to unforseen issues later. Fix this. Fixes: 52c7a088badd ("ARM: dts: imx6q: Add support for the DHCOM iMX6 SoM and PDK2") Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Ludwig Zenz <lzenz@dh-electronics.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: stable@vger.kernel.org Reviewed-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-10ARM: dts: imx6dl-yapp4: Fix RGMII connection to QCA8334 switchMichal Vokáč1-1/+5
commit 0e4a4a08cd78efcaddbc2e4c5ed86b5a5cb8a15e upstream. The FEC does not have a PHY so it should not have a phy-handle. It is connected to the switch at RGMII level so we need a fixed-link sub-node on both ends. This was not a problem until the qca8k.c driver was converted to PHYLINK by commit b3591c2a3661 ("net: dsa: qca8k: Switch to PHYLINK instead of PHYLIB"). That commit revealed the FEC configuration was not correct. Fixes: 87489ec3a77f ("ARM: dts: imx: Add Y Soft IOTA Draco, Hydra and Ursa boards") Cc: stable@vger.kernel.org Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-10ARM: dts: imx: emcon-avari: Fix nxp,pca8574 #gpio-cellsGeert Uytterhoeven1-1/+1
[ Upstream commit b73eb6b3b91ff7d76cff5f8c7ab92fe0c51e3829 ] According to the DT bindings, #gpio-cells must be two. Fixes: 63e71fedc07c4ece ("ARM: dts: Add support for emtrion emCON-MX6 series") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-10ARM: dts: imx7d-pico: Fix the 'tuning-step' propertyFabio Estevam1-1/+1
[ Upstream commit 0e2fa4959c4f44815ce33e46e4054eeb0f346053 ] According to Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml, the correct name of the property is 'fsl,tuning-step'. Fix it accordingly. Signed-off-by: Fabio Estevam <festevam@gmail.com> Fixes: f13f571ac8a1 ("ARM: dts: imx7d-pico: Extend peripherals support") Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-10ARM: dts: imx7d-meerkat96: Fix the 'tuning-step' propertyFabio Estevam1-1/+1
[ Upstream commit 7c8f0338cdacc90fdf6468adafa8e27952987f00 ] According to Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml, the correct name of the property is 'fsl,tuning-step'. Fix it accordingly. Signed-off-by: Fabio Estevam <festevam@gmail.com> Fixes: ae7b3384b61b ("ARM: dts: Add support for 96Boards Meerkat96 board") Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-09Merge branch 'dev-5.10' into dev-5.10-intelJae Hyun Yoo38-190/+2053
This is the 5.10.42 stable release. Also, this commit merges OpenBMC upstream changes. Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@intel.com>
2021-06-07ARM: dts: aspeed: everest: Add pcie cable card indicator ledsVishwanatha Subbanna1-2/+618
These are leds on the IBM proprietary PCIE cards called cable cards. Cable cards have 2 ports on them and each port has an indicator led. OpenBMC-Staging-Count: 1 Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-07ARM: dts: aspeed: everest: Add vrm and other indicator ledsVishwanatha Subbanna1-0/+270
This commit adds indicator leds for vrms, processors, opencapi connectors, tpm, planar, power distribution card and dasd backplane and are driven by PIC16F882. OpenBMC-Staging-Count: 1 Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-07ARM: dts: aspeed: everest: Add dimm indicator ledsVishwanatha Subbanna1-0/+552
These are dimm indicator leds driven by PIC16F882. OpenBMC-Staging-Count: 1 Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-07ARM: dts: aspeed: everest: Add pcie slot indicator ledsVishwanatha Subbanna1-0/+123
These are pcie slot indicator leds driven by PCA9552. OpenBMC-Staging-Count: 1 Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-07ARM: dts: aspeed: everest: Add nvme and fan indicator ledsVishwanatha Subbanna1-0/+132
These are the indicator leds for nvme slots and fans and are driven by PCA9552. OpenBMC-Staging-Count: 1 Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-07ARM: dts: aspeed: everest: Add system level indicator ledsVishwanatha Subbanna1-0/+42
These are the system level indicator leds that are driven by PCA9551 connected to the Operator Panel. OpenBMC-Staging-Count: 1 Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-07ARM: dts: aspeed: Rainier 1S4U: Fix fan nodesEddie James1-1/+1
The 1S4U system populates fans 0, 1, 2, and 4. Update the dts to reflect this. OpenBMC-Staging-Count: 1 Fixes: 7f03894a6555 ("ARM: dts: aspeed: Add Rainier 1S4U machine") Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-07ARM: dts: aspeed: ast2600evb: Actually add dts file for A1 and A0Steven Lee1-0/+15
The first attempt at merging this patch missed the dts. Signed-off-by: Steven Lee <steven_lee@aspeedtech.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-04ARM: dts: aspeed-g5: Add SCU phandle to GFX nodeJoel Stanley1-0/+1
In v5.13 the DRM driver gained support for using a phandle to the SCU, instead of matching on the scu compatible. OpenBMC-Staging-Count: 1 Link: https://lore.kernel.org/r/20210603064536.165297-1-joel@jms.id.au Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-04ARM: dts: aspeed: Everest: Add directly controlled LEDsVishwanatha Subbanna1-2/+31
These LEDs are directly connected to the BMC's GPIO bank OpenBMC-Staging-Count: 1 Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-04ARM: dts: aspeed: Rainier 4U: Remove fan updatesEddie James1-30/+0
The 4U fans do not need a different "tach-pulses" property than the 2U machine. In addition, the "maxim,fan-dual-tach" property does not exist upstream yet, so it should also be removed. OpenBMC-Staging-Count: 1 Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-04ARM: dts: aspeed: Everest: Fix cable card PCA chipsSantosh Puranik1-85/+83
Correct two PCA chips which were placed on the wrong I2C bus and address. OpenBMC-Staging-Count: 1 Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Santosh Puranik <santosh.puranik@in.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-04ARM: dts: aspeed: Grow u-boot partition 64MiB OpenBMC flash layoutTroy Lee2-40/+10
Aspeed AST2600 u-boot requires 600KiB+ flash space. Sharing the same openbmc-flash-layout-64.dtsi requires to resize the flash partition. The updated flash layout as follows: - u-boot: 896 KiB - u-boot-env: 128 KiB - kernel: 9MiB - rofs: 32 MiB - rwfs: 22 MiB OpenBMC-Staging-Count: 1 Signed-off-by: Troy Lee <troy_lee@aspeedtech.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210316085932.2601-1-troy_lee@aspeedtech.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-04ARM: dts: aspeed: mtjade: switch to 64MB flash layoutQuan Nguyen1-1/+1
As the 32MB flash layout will soon be exhausted, switch to 64MB layout. OpenBMC-Staging-Count: 1 Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com> Signed-off-by: Phong Vo <phong@os.amperecomputing.com> Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com> Link: https://lore.kernel.org/r/20210517040036.13667-4-quan@os.amperecomputing.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-04ARM: dts: aspeed: mtjade: Add PSU supportQuan Nguyen1-2/+40
Enable PSU support on Ampere's Mt. Jade BMC. OpenBMC-Staging-Count: 1 Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com> Signed-off-by: Phong Vo <phong@os.amperecomputing.com> Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com> Link: https://lore.kernel.org/r/20210517040036.13667-3-quan@os.amperecomputing.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-04ARM: dts: aspeed: mtjade: Enable OCP card support via NC-SIQuan Nguyen1-1/+12
Enable OCP card support on Ampere's Mt. Jade BMC. OpenBMC-Staging-Count: 1 Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com> Signed-off-by: Phong Vo <phong@os.amperecomputing.com> Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com> Link: https://lore.kernel.org/r/20210517040036.13667-2-quan@os.amperecomputing.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-04ARM: dts: aspeed: Set earlycon boot argumentJoel Stanley29-29/+29
Most of the aspeed boards have copied the 'earlyprink' string in the bootargs. However, there's no earlyprink driver configured in the defconfigs, so this does nothing. A combination of setting stdout in the chosen node and adding earlycon to bootargs causes early serial output to appear early. This changes all boards to use this option. The console=ttyS4,115200 option is still required, as this is used by the run time uart driver. OpenBMC-Staging-Count: 1 Signed-off-by: Joel Stanley <joel@jms.id.au> Acked-by: Andrew Jeffery <andrew@aj.id.au> Acked-by: Alexander Filippov <a.filippov@yadro.com> Link: https://lore.kernel.org/r/20210526051220.136432-1-joel@jms.id.au Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-04ARM: dts: aspeed-g6: Add pinctrl settingsSteven Lee1-0/+10
AST2600 supports 2 SGPIO master interfaces and 2 SGPIO slave interfaces. Currently, only SGPIO master 1 and SGPIO slve 1 in the pinctrl dtsi. SGPIO master 2 and slave 2 should be added in pinctrl dtsi as well. OpenBMC-Staging-Count: 1 Signed-off-by: Steven Lee <steven_lee@aspeedtech.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210525055308.31069-3-steven_lee@aspeedtech.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-04ARM: dts: aspeed: ast2600evb: Add dts file for A1 and A0Steven Lee1-0/+1
aspeed-ast2600-evb.dts was modified for supporting A2 evb. Since A1/A0 evbs don't have GPIO regulators and SD clock frequency (SCU210) is different to A2 as well. Adding a new dts that removes new nodes created in aspeed-ast2600-evb.dts is necessary. OpenBMC-Staging-Count: 1 Signed-off-by: Steven Lee <steven_lee@aspeedtech.com> Acked-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20210524073308.9328-4-steven_lee@aspeedtech.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-04ARM: dts: aspeed: ast2600evb: Add phase correction for emmc controller.Steven Lee1-1/+2
Set MMC timing-phase register by adding the phase correction binding in the device tree. OpenBMC-Staging-Count: 1 Signed-off-by: Steven Lee <steven_lee@aspeedtech.com> Acked-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210524073308.9328-3-steven_lee@aspeedtech.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-04ARM: dts: aspeed: ast2600evb: Add sdhci node and gpio regulator for A2 evb.Steven Lee1-0/+84
AST2600 A2 (or newer) EVB has gpio regulators for toggling signal voltage between 3.3v and 1.8v, the patch adds sdhci node and gpio regulator in the dts file and adds comment for describing the reference design. OpenBMC-Staging-Count: 1 Signed-off-by: Steven Lee <steven_lee@aspeedtech.com> Acked-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20210524073308.9328-2-steven_lee@aspeedtech.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-05-26Merge branch 'dev-5.10' into dev-5.10-intelJae Hyun Yoo101-486/+2630
This is the 5.10.39 stable release Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@intel.com>
2021-05-26Revert "ARM: dts: aspeed-g6: add GFX node"Jae Hyun Yoo2-14/+0
This reverts commit d910c0d4351e7b00c9dd7dc8a42a5c5b2346b9b6. Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@intel.com>
2021-05-24Merge tag 'v5.10.39' into dev-5.10Joel Stanley32-48/+148
This is the 5.10.39 stable release Signed-off-by: Joel Stanley <joel@jms.id.au>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-28 07:16:56 +0300