summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/qcom/msm8916.dtsi
AgeCommit message (Collapse)AuthorFilesLines
2018-05-23arm64: dts: msm8916: fix gic_irq_domain_translate warningsSrinivas Kandagatla1-9/+9
Remove the usage of IRQ_TYPE_NONE to fix loud warnings from patch (83a86fbb5b56b "irqchip/gic: Loudly complain about the use of IRQ_TYPE_NONE"). Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Thierry Escande <thierry.escande@linaro.org> Tested-by: Thierry Escande <thierry.escande@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-03-09arm64: dts: msm8916: Add cpu cooling mapsRajendra Nayak1-0/+19
Add cpu cooling maps for cpu passive trip points. The cpu cooling device states are mapped to cpufreq based scaling frequencies. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-03-09arm64: dts: qcom: msm8916: Add CPU frequency scaling supportGeorgi Djakov1-0/+26
Add a CPU OPP table to allow CPU frequency scaling on msm8916 platforms. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Tested-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-03-09arm64: dts: qcom: msm8916: Add clock properties to the APCS nodeGeorgi Djakov1-0/+2
There are clock controller registers in the APCS block, which purpose is to control the main CPU mux and divider. Add the clock properties as part of the APCS device-tree node. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-03-09arm64: dts: qcom: msm8916: Probe the APCS mailbox driverGeorgi Djakov1-3/+4
The APCS block was exposed until now as a syscon, but now we have a proper driver for this block. Add the compatible string of the new driver to probe and register the mailbox functionality. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-03-09arm64: dts: qcom: msm8916: Add msm8916 A53 PLL DT nodeGeorgi Djakov1-0/+6
Add a device tree node for the A53 PLL, which exists on msm8916 platforms. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-01-01arm64: dts: qcom: msm8916: normalize I2C and SPI nodesDamien Riegel1-12/+12
The QUP core can be used either for I2C or SPI, so the same IP is mapped by a driver or the other. SPI bindings use a leading 0 for the start address and a size of 0x600, I2C bindings don't have the leading 0 and have a size 0x1000. To make them more similar, add the leading 0 to I2C bindings and changes the size to 0x500 for all of them, as this is the actual size of these blocks. Also align the second entry of the clocks array. Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-01-01arm64: dts: msm8916: Correct ipc references for smsmBjorn Andersson1-2/+2
SMSM is not symmetrical, the incoming bits from WCNSS are available at index 6, but the outgoing host id for WCNSS is 3. Further more, upstream references the base of APCS (in contrast to downstream), so the register offset of 8 must be included. Fixes: 1fb47e0a9ba4 ("arm64: dts: qcom: msm8916: Add smsm and smp2p nodes") Cc: stable@vger.kernel.org Reported-by: Ramon Fried <rfried@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-01-01arm64: dts: msm8916: Add missing #phy-cellsBjorn Andersson1-0/+1
Add a missing #phy-cells to the dsi-phy, to silence dtc warning. Cc: Archit Taneja <architt@codeaurora.org> Fixes: 305410ffd1b2 ("arm64: dts: msm8916: Add display support") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-10-20Merge tag 'qcom-arm64-for-4.15' of ↵Arnd Bergmann1-1/+6
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/soc Pull "Qualcomm ARM64 Updates for v4.15" from Andy Gross: * Add PCIE support to relevant MSM8996 based boards * Add RPM clock controller node on MSM8996 * Add dload address on MSM8916 and MSM8996 * Add MBHC button support on APQ8016 SBC * Add RTMFS specific compatible for rmtfs memory node * Fixups for MSM8916 GPIO line names and MDP address length * tag 'qcom-arm64-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: arm64: dts: msm8916: Mark rmtfs node as qcom, rmtfs-mem compatible arm64: dts: msm8996: Add the rpm clock controller node arm64: dts: qcom: sbc: Name GPIO lines arm64: dts: qcom: msm8916: Shrink mdp address length for msm8916 arm64: dts: apq8016-sbc: add mbhc buttons support arm64: dts: qcom: Specify dload address for msm8916 and msm8996 arm64: dts: apq8096-db820c: never disable regulator on LS expansion arm64: dts: apq8096-db820c: Enable on board 3 pcie root complex arm64: dts: qcom: msm8996: add support to pcie
2017-10-20arm64: dts: fix unit-address leading 0sRob Herring1-3/+3
Fix dtc warnings for 'simple_bus_reg' due to leading 0s. Converted using the following command: perl -p -i -e 's/\@0+([0-9a-f])/\@$1/g' `find arch/arm64/boot/dts -type -f -name '*.dts*' Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-10-12arm64: dts: msm8916: Mark rmtfs node as qcom, rmtfs-mem compatibleBjorn Andersson1-0/+3
Now that we have a binding defined for the shared file system memory use this to describe the rmtfs memory region. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-10-12arm64: dts: qcom: msm8916: Shrink mdp address length for msm8916Craig Tatlor1-1/+1
This shrinks the address size down to 89000 from its previous 90000 which was mistakenly pulled from downstream. Signed-off-by: Craig Tatlor <ctatlor97@gmail.com> Acked-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-10-12arm64: dts: qcom: Specify dload address for msm8916 and msm8996Bjorn Andersson1-0/+2
On msm8916 and msm8996 boards a secure io-write is used to write the magic for selecting "download mode", specify this address in the DeviceTree. Note that qcom_scm.download_mode=1 must be specified on the kernel command line for the kernel to attempt selecting download mode. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-08-16arm64: dts: qcom: msm8916: Add IOMMU supportRob Clark1-0/+57
This patch adds the IOMMU node for the IOMMU that resides on the Qualcomm MSM8916 platforms. Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-08-16arm64: dts: qcom: msm8916: Add Venus video codec supportStanimir Varbanov1-0/+26
This patch adds the Qualcomm Venus video codec node for the video codec hardware residing on MSM8916 platforms. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-08-15arm64: dts: qcom: msm8916: Add gpu supportRob Clark1-0/+35
This patch adds the Qualcomm Adreno GPU node that exists in the MSM8916. Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-08-09arm64: dts: qcom-msm8916: dts: Update coresight replicatorSuzuki K. Poulose1-1/+1
Replace the obsolete compatible string for Coresight programmable replicator with the new one. Cc: Andy Gross <andy.gross@linaro.org> Cc: David Brown <david.brown@linaro.org> Cc: linux-arm-msm@vger.kernel.org Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-07-05Merge tag 'armsoc-dt64' of ↵Linus Torvalds1-33/+29
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM 64-bit DT updates from Arnd Bergmann: "Device-tree updates for arm64 platforms. For the first time I can remember, this is actually larger than the corresponding branch for 32-bit platforms overall, though that has more individual changes. A significant portion this time is due to added machine support: - Initial support for the Realtek RTD1295 SoC, along with the Zidoo X9S set-top-box - Initial support for Actions Semi S900 and the Bubblegum-96 single-board-cёmputer. - Rockchips support for the rk3399-Firefly single-board-computer gets added, this one stands out for being relatively fast, affordable and well₋supported, compared to many boards that only fall into one or two of the above categories. - Mediatek gains support for the mt6797 mobile-phone SoC platform and corresponding evaluation board. - Amlogic board support gets added for the NanoPi K2 and S905x LibreTech CC single-board computers and the R-Box Pro set-top-box - Allwinner board support gets added for the OrangePi Win, Orangepi Zero Plus 2, NanoPi NEO2 and Orange Pi Prime single board computers and the SoPine system-on-module. - Renesas board support for Salvator-XS and H3ULCB automotive development systems. - Socionext Uniphier board support for LD11-global and LD20-global, whatever those may be. - Broadcom adds support for the new Stingray communication processor in its iProc family, along with two reference boards. Other updates include: - For the hisicon platform, support for Hi3660-Hikey960 gets extended significantly. - Lots of smaller updates for Renesas, Amlogic, Rockchip, UniPhier, Broadcom, Allwinner, Hisilicon, Qualcomm, Marvell, and NXP" * tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (243 commits) ARM64: dts: marvell: armada37xx: Fix timer interrupt specifiers Revert "arm64: dts: marvell: add dma-mask in crypto nodes for 7k/8k" arm64: dts: mediatek: don't include missing file ARM64: dts: meson-gxl: Add Libre Technology CC support dt-bindings: arm: amlogic: Add Libre Technology CC board dt-bindings: add Libre Technology vendor prefix arm64: dts: marvell: enable GICP and ICU on Armada 7K/8K arm64: dts: zte: Use - instead of @ for DT OPP entries arm64: dts: marvell: add gpio support for Armada 7K/8K arm64: dts: marvell: add pinctrl support for Armada 7K/8K arm64: dts: marvell: use new binding for the system controller on cp110 arm64: dts: marvell: remove *-clock-output-names on cp110 arm64: dts: marvell: use new bindings for xor clocks on ap806 arm64: dts: marvell: mcbin: enable the mdio node arm64: dts: Add Actions Semi S900 and Bubblegum-96 dt-bindings: Add vendor prefix for uCRobotics arm64: dts: marvell: add xmdio nodes for 7k/8k arm64: dts: marvell: add a comment on the cp110 slave node status arm64: dts: marvell: remove cpm crypto nodes from dts files arm64: dts: marvell: cp110: enable the crypto engine at the SoC level ...
2017-06-09arm64: dts: qcom: msm8916: Add debug unitLeo Yan1-0/+32
Add debug unit on Qualcomm msm8916 based platforms, including the DragonBoard 410c board. Signed-off-by: Leo Yan <leo.yan@linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Acked-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-26arm64: dts: qcom: Collapse usb support into one nodeStephen Boyd1-33/+29
We currently have three device nodes for the same USB hardware block, as evident by the reuse of the same reg address multiple times. Now that the chipidea driver fully supports OTG with the MSM wrapper we can collapse all these nodes into one USB device node, reflecting the true nature of the hardware. Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-03-28arm64: dts: qcom: msm8916: Update hexagon nodeBjorn Andersson1-10/+14
It's necessary to reference the xo clock and cx supply, so specify these in the node. Also move the Hexagon smd-edge into the hexagon node, to enable SSR. As cxo is not yet available we reference the fixed version of cxo for now, which will work until proper power management is implemented. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-03-28arm64: dts: qcom: Replace PMU compatible with a53 specific oneStephen Boyd1-1/+1
The PMU on msm8916 is for the cortex-a53 type CPU. Update the compatible to the more specific one so we can get the a53 specific events out of the PMU. Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-02-01arm64: dts: qcom: Add msm8916 CoreSight componentsIvan T. Ivanov1-0/+240
Add initial set of CoreSight components found on Qualcomm msm8916 and apq8016 based platforms, including the DragonBoard 410c board. Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org> Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-01-13ARM: dts: msm8916: Add and enable wcnss nodeBjorn Andersson1-1/+72
Add the wcnss remoteproc node the SMD edge and the wcnss ctrl, bluetooth and wifi nodes specified and enable this on db410c. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-01-13arm64: dts: qcom: msm8916: Use fixed factor xo clockGeorgi Djakov1-1/+1
The rpmcc driver is providing the XO clock, which is the parent of almost all clocks. But during boot, this driver may probe later and leave most of the clocks without parent. The common clock framework currently reports invalid rate for orphan clocks and this may confuse drivers. To resolve this, use fixed clocks registration until we have some support to deal with the this issue. Removing the generic rpmcc compatible is enough to switch back to fixed factor XO clock. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-11-24arm64: dts: qcom: msm8916: Add ddr support to sdhc1Ritesh Harjani1-0/+1
This adds mmc-ddr-1_8v support to DT for sdhc1 of msm8916. Signed-off-by: Ritesh Harjani <riteshh@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-11-23ARM: dts: Add xo to sdhc clock node on qcom platformsRitesh Harjani1-4/+6
Add xo entry to sdhc clock node on all qcom platforms. Signed-off-by: Ritesh Harjani <riteshh@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-11-13arm64: dts: apq8016-sbc: add analog audio support with multicodecSrinivas Kandagatla1-0/+9
This patch add support to Analog audio both Playback and Capture via msm8916 WCD muti codec. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-10-24arm64: dts: qcom: msm8916: Add Hexagon PIL nodeBjorn Andersson1-1/+44
The Hexagon core on the msm8916 provides services for audio control, audio output, sensors and the Hexagon SDK. The Hexagon remoteproc node allows us to boot this core. Although its part of the core platform its left disabled as it will crash without the rmtfs QMI service and we do not yet handle crashes gracefully. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-10-24arm64: dts: qcom: msm8916: Add Hexagon SMD edgeBjorn Andersson1-0/+8
Add the Hexagon SMD edge, so that QRTR is probed when the Hexagon is booted. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-08-26arm64: dts: msm8916: Add display supportArchit Taneja1-0/+117
The MSM8916 SoC contains a MDP5 based display block, and one DSI output. Add the top level MDSS DT node, and the MDP5, DSI and DSI PHY children sub-blocks. Establish the link between MDP5's INTF1 output port and DSI's input port. Cc: Andy Gross <andy.gross@linaro.org> Cc: Rob Herring <robh@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Archit Taneja <architt@codeaurora.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-08-24arm64: dts: msm8916: Add thermal zones, tsens and qfprom nodesRajendra Nayak1-0/+64
Add thermal zones, tsens and qfprom nodes Acked-by: Eduardo Valentin <edubezval@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-08-24arm64: dts: qcom: Fix broken interrupt trigger settingsMarc Zyngier1-5/+5
When a device uses the GIC as its interrupt controller and generates SPIs, only the values 1 (edge rising) and 4 (level high) are legal. Anything else is just plain wrong (can't be programmed into the HW), and leads to aborted driver probes (USB doesn't work with 4.8-rc1 on a Dragonboard 410C). Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-08-24arm64: dts: qcom: msm8916: Add tcsr sysconBjorn Andersson1-0/+5
The TCSR memory segment includes various functionality, among other things the halt-registers for the Hexagon. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-08-24arm64: dts: qcom: msm8916: Make scm a reset-controllerBjorn Andersson1-1/+2
On msm8916 SCM acts as a controller for the MSS_RESET found in the GCC, update the DT node so that we can address this. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-08-24arm64: dts: qcom: msm8916: Add mba memory reserveBjorn Andersson1-0/+5
The modem boot authenticator needs space to play in, this is supposed to be relocatable and as such could later be replaced with a dynamically allocated chunk of memory. But let's give it a reserve for now, as we know that works. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-08-24arm64: dts: qcom: msm8916: Add smsm and smp2p nodesBjorn Andersson1-0/+82
This patch adds the smsm and smp2p nodes for the hexagon and wcnss cores. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-06-12ARM: dts: msm8916: Update reserved-memoryBjorn Andersson1-3/+38
Update reserved-memory in accordance with memory the detailed memory map for 8916, so that we will be able to reference the firmware memory regions. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-06-12arm64: dts: msm8916: Add SCM firmware nodeAndy Gross1-0/+8
This adds the devicetree node for the SCM firmware. Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
2016-06-12arm64: dts: qcom: Add msm8916 PMU nodeStephen Boyd1-0/+5
Add the PMU so we can get proper perf event support on this SoC. Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-06-12ARM64: dts: Add PSCI cpuidle support for MSM8916Lina Iyer1-0/+24
Add device bindings for CPUs to suspend using PSCI as the enable-method. Cc: <devicetree@vger.kernel.org> Signed-off-by: Lina Iyer <lina.iyer@linaro.org> Tested-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-02-26arm64: dts: qcom: fix usb digital voltage levelsSrinivas Kandagatla1-1/+1
This patch updates the digital voltage levels from corner values to microvolts as we are going to use s1 regulator directly for vddcx instead of s1_corner. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
2016-02-26arm64: dts: qcom: add lpass nodeSrinivas Kandagatla1-0/+26
This patch adds lpass node to the SOC. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
2016-02-26arm64: dts: qcom: add manual pullup setting to otg.Srinivas Kandagatla1-0/+1
This patch adds manual pull up setting for usb otg indicating that the vbus is vbus is not routed to USB controller/phy therefore enables pull-up explicitly before starting controller. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
2016-02-24arm64: dts: qcom: msm8916: Add RPMCC DT nodeGeorgi Djakov1-0/+5
Add the RPM Clock Controller DT node and include the necessary header file for clocks. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-02-24arm64: dts: qcom: add lable for smd rpm regulatorsSrinivas Kandagatla1-1/+1
This patch adds label to smd rpm regulators so that the board level file can use the label directly to populate the regulators, rather than having deep nesting. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-02-24arm64: dts: remove s2 regulator from smd regulators.Srinivas Kandagatla1-1/+0
s2 is spmi controller regulator on msm8916 according to downstream 3.10 kernel, so remove it from the dt to avoid confusion an use of it. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-02-24arm64: dts: Add L2 cache node to msm8916Stephen Boyd1-0/+9
The msm8916 SoC has an L2 cache for all 4 CPUs. Add it to the dtsi file so that the cache hierarchy can be probed. Cc: <devicetree@vger.kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Reviewed-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-02-24arm64: dts: Rename qcom,gcc node to clock-controllerStephen Boyd1-1/+1
Use the standard name for clock controller nodes instead of a qcom specific name. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Reviewed-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-25 18:24:50 +0300