summaryrefslogtreecommitdiff
path: root/arch/arm/configs/marzen_defconfig
AgeCommit message (Collapse)AuthorFilesLines
2014-02-04ARM: shmobile: marzen: enable CONFIG_DEVTMPFS in defconfigKuninori Morimoto1-0/+2
This reverts commit 41307133da4b6f242ecbb45950b9d043c0b21b96 ("ARM: shmobile: marzen: Do not enable CONFIG_DEVTMPFS defconfig"). DEVTMPFS is needed for udev. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [horms+renesas@verge.net.au: Added subject of reverted patch to changelog] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-30Merge tag 'renesas-boards-for-v3.14' of ↵Olof Johansson1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards From Simon Horman: Renesas ARM based SoC board updates for v3.14 * Global - Kconfig: Mention Renesas ARM SoCs instead of SH-Mobile * r7s72100 SoC (RZ/A1H) based Genmai Board - Add Multiplatform support - Add Reference DT * r8a7791 (R-Car M2) based Koelsch board - Add pinctrl_register_mappings() for Koelsch - Hook up SW30-SW36 on Koelsch - Mark GPIO keys as wake-up sources - Use ->init_late() - Add Multiplatform support - Set .debounce_interval for GPIO keys - Add SW2 to GPIO keys - Add Led 6, 7 and 8 support - Add reference DT - Enable PFC/GPIO * r8a7790 (R-Car H2) based Lager board - Add gpio/fixed regulator for SDHI - Add SPI FLASH support on QSPI - Mark GPIO keys as wake-up sources - Use ->init_late() - Set .debounce_interval for GPIO keys * r8a7778 (R-Car M1) based Bock-W board - bockw: remove unused RSND_SSI_CLK_FROM_ADG - Set .debounce_interval for GPIO keys - Correct FPGA ioremap area - Use regulator for MMCIF * r8a7740 (R-Mobile A1) based Armadillo board - Correct FSI address size * sh7374 (SH-Mobile AP4) based Mackerel board - Use pinconf API to configure pin pull-down - clk_round_rate() can return a zero to indicate an error * tag 'renesas-boards-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (75 commits) ARM: shmobile: lager: add gpio/fixed regulator for SDHI ARM: shmobile: bockw: remove unused RSND_SSI_CLK_FROM_ADG ARM: shmobile: armadillo: fixup FSI address size ARM: Kconfig: Mention Renesas ARM SoCs instead of SH-Mobile ARM: shmobile: mackerel: Use pinconf API to configure pin pull-down ARM: shmobile: Lager:add SPI FLASH support on QSPI ARM: shmobile: mackerel: clk_round_rate() can return a zero to indicate an error ARM: shmobile: Add pinctrl_register_mappings() for Koelsch ARM: shmobile: Use ->init_late() on Lager ARM: shmobile: Hook up SW30-SW36 on Koelsch ARM: shmobile: koelsch: mark GPIO keys as wake-up sources ARM: shmobile: Use ->init_late() on Koelsch ARM: shmobile: lager: mark GPIO keys as wake-up sources ARM: shmobile: r7s72100 Genmai Multiplatform ARM: shmobile: r7s72100 Genmai DT reference C bits ARM: shmobile: r7s72100 Genmai DT reference DTS bits ARM: shmobile: Initial r8a7791 and Koelsch multiplatform support ARM: shmobile: koelsch: set .debounce_interval ARM: shmobile: lager: set .debounce_interval ARM: shmobile: bockw: add pin pull-up setting for SDHI ... Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-10ARM: Rename ARCH_SHMOBILE to ARCH_SHMOBILE_LEGACYLaurent Pinchart1-1/+1
SH-Mobile platforms are transitioning from non-multiplatform to multiplatform kernel. A new ARCH_SHMOBILE_MULTI configuration symbol has been created to group all multiplatform-enabled SH-Mobile SoCs. The existing ARCH_SHMOBILE configuration symbol groups SoCs that haven't been converted yet. This arrangement works fine for the arch/ code, but lots of drivers needed on both ARCH_SHMOBILE and ARCH_SHMOBILE_MULTI depend on ARCH_SHMOBILE only. In order to avoid changing them, rename ARCH_SHMOBILE to ARCH_SHMOBILE_LEGACY, and create a new boolean ARCH_SHMOBILE configuration symbol that is selected by both ARCH_SHMOBILE_LEGACY and ARCH_SHMOBILE_MULTI. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-11-24ARM: shmobile: marzen: enable HPB-DMAC in defconfigSergei Shtylyov1-0/+2
Enable HPB-DMAC driver in 'marzen_defconfig'. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-11-24ARM: shmobile: marzen: Do not enable CONFIG_SMC911X in defconfigSimon Horman1-1/+0
CONFIG_SMC911X is not needed by marzen. It appears to have been accidently enabled as well as CONFIG_SMSC911X which is needed by marzen. Signed-off-by: Simon Horman <horms@verge.net.au>
2013-11-24ARM: shmobile: marzen: Enable CONFIG_PACKET in defconfigSimon Horman1-0/+1
CONFIG_PACKET is required for the ISC dhcpd daemon function. This change brings the marzen defconfig into line with other shmobile defconfigs. Signed-off-by: Simon Horman <horms@verge.net.au>
2013-11-24ARM: shmobile: marzen: Do not enable CONFIG_DEVTMPFS defconfigSimon Horman1-2/+0
This change brings the marzen defconfig into line with other shmobile defconfigs. Signed-off-by: Simon Horman <horms@verge.net.au>
2013-11-24ARM: shmobile: marzen: Enable CONFIG_VFP in defconfigSimon Horman1-0/+1
CONFIG_VFP is required to boot into a Debian armhf user-space. This change brings the marzen defconfig into line with other shmobile defconfigs. Signed-off-by: Simon Horman <horms@verge.net.au>
2013-11-24ARM: shmobile: marzen: Do not disable CONFIG_INOTIFY_USER in defconfigSimon Horman1-1/+0
CONFIG_INOTIFY_USER is required for udev to function. This change brings the marzen defconfig into line with other shmobile defconfigs. Signed-off-by: Simon Horman <horms@verge.net.au>
2013-11-24ARM: shmobile: marzen: Do not set command line in defconfigSimon Horman1-2/+0
As a set towards moving shmobile towards multi-platform the kernel command line should be set in the DTB rather than in the kernel config. marzen already has the command line present in its DTS file but it was being overrirden by the kernel config. Signed-off-by: Simon Horman <horms@verge.net.au>
2013-09-21ARM: shmobile: marzen: Select DRM_RCAR_DU in defconfigLaurent Pinchart1-0/+2
A R-Car DU DRM device is registered for the Marzen board, select the corresponding driver in its defconfig. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-07Merge tag 'boards-for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC board updates from Olof Johansson: "Board updates for 3.12. Again, a bit of domain overlap with SoC and DT branches, but most of this is around legacy code and board support. We've found that platform maintainers have a hard time separating all of these out and might move towards fewer branches for next release. - Removal of a number of Marvell Kirkwood board files, since contents is now common and mostly configured via DT. - Device-tree updates for Marvell Dove, including irqchip and clocksource setup. - Defconfig updates. Gotta go somewhere. One new one for Renesas Lager. - New backlight drivers for backlights used on Renesas shmobile platforms. - Removal of Renesas leds driver. - Shuffling of some of the new Broadcom platforms to give room for others in the same mach directory. More in 3.13" * tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (67 commits) mmc: sdhci-bcm-kona: Staticize sdhci_bcm_kona_card_event mmc: sdhci-bcm-kona: Remove unneeded version.h inclusion ARM: bcm: Make secure API call optional ARM: DT: binding fixup to align with vendor-prefixes.txt (drivers) ARM: mmc: fix NONREMOVABLE test in sdhci-bcm-kona ARM: bcm: Rename board_bcm mmc: sdhci-bcm-kona: make linker-section warning go away ARM: tegra: defconfig updates ARM: dove: add initial DT file for Globalscale D2Plug ARM: dove: add GPIO IR receiver node to SolidRun CuBox ARM: dove: add common pinmux functions to DT ARM: dove: add cpu device tree node ARM: dove: update dove_defconfig with SI5351, PCI, and xHCI arch/arm/mach-kirkwood: Avoid using ARRAY_AND_SIZE(e) as a function argument ARM: kirkwood: fix DT building and update defconfig ARM: kirkwood: Remove all remaining trace of DNS-320/325 platform code ARM: configs: disable DEBUG_LL in bcm_defconfig ARM: bcm281xx: Board specific reboot code ARM bcm281xx: Turn on socket & network support. ARM: bcm281xx: Turn on L2 cache. ...
2013-08-25[media] ARM: shmobile: Marzen: enable VIN and ADV7180 in defconfigVladimir Barinov1-0/+7
Add the VIN and ADV7180 drivers to 'marzen_defconfig'. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-07-30ARM: shmobile: marzen: Enable ARM_APPENDED_DTB in defconfigSimon Horman1-0/+1
"ARM: shmobile: marzen: Switch to DT_MACHINE_START" moves marzen over to use DT_MACHINE_START, however, the prevalent boot loader does not support booting with a separate dtb. Thus, it makes sense to use ARM_APPENDED_DTB by default. This is consistent with other shmobile defconfigs. Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-27ARM: shmobile: marzen: defconfig: enable GPIO LEDs driverSimon Horman1-0/+3
This enables the code added to the marzen board in "ARM: shmobile: marzen: Add GPIO LEDs". Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-27ARM: shmobile: marzen: defconfig: add GPIO RCAR driver supportSimon Horman1-0/+1
This enables the driver added in "gpio: Renesas R-Car GPIO driver V3" Cc: Magnus Damm <damm@opensource.se> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-14ARM: mach-shmobile: marzen: add SATA supportVladimir Barinov1-0/+4
Add SATA support to marzen_defconfig. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-02-14ARM: shmobile: fix defconfig warning on CONFIG_USBArnd Bergmann1-1/+0
A recent update to the marzen_defconfig introduced a duplicate CONFIG_USB=y line. This removes one of the two. arch/arm/configs/marzen_defconfig:86:warning: override: reassigning to symbol USB Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Simon Horman <horms+renesas@verge.net.au> Cc: linux-sh@vger.kernel.org
2012-11-08ARM: shmobile: marzen: add USB OHCI driver supportKuninori Morimoto1-2/+3
This patch supports CN21/CN22 USB 1.x (port 0/1/2), and enable input event on defconfig Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms@verge.net.au>
2012-11-08ARM: shmobile: marzen: add USB EHCI driver supportKuninori Morimoto1-0/+6
This patch supports CN21/CN22 USB 2.0 (port 0/1/2), and enable USB momery on defconfig Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms@verge.net.au>
2012-11-08ARM: shmobile: marzen: add USB phy supportKuninori Morimoto1-1/+2
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms@verge.net.au>
2012-10-30ARM: shmobile: marzen: add HSPI supportKuninori Morimoto1-0/+4
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms@verge.net.au>
2012-10-07Merge tag 'defconfig' of ↵Linus Torvalds1-5/+10
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM soc defconfig updates from Olof Johansson: "This might be the last time we do a standalone defconfig branch, since we now prefer to get them with the rest of the subarch updates instead. These add a handful of useful options on various platforms, enable new boards and SoCs, etc." * tag 'defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: tegra: defconfig updates ARM: LPC32xx: Defconfig update ARM: mach-shmobile: marzen: defconfig update ARM: mxs_defconfig: Add SPI and LRADC support ARM: s3c6400_defconfig: enable more boards in defconfig ARM: imx_v6_v7_defconfig: Remove CONFIG_DEFAULT_MMAP_MIN_ADDR ARM: imx_v6_v7_defconfig: Add Chipidea USB driver support ARM: mxs_defconfig: Add framebuffer support ARM: mxs_defconfig: Add LED, PWM and MTD_CHAR support ARM: mxs_defconfig: Enable USB host
2012-09-06ARM: shmobile: marzen: enable thermal sensorKuninori Morimoto1-0/+2
Marzen board can measure its thermal by this patch. cat /sys/class/thermal/thermal_zoneX/temp Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms@verge.net.au>
2012-09-06ARM: mach-shmobile: marzen: defconfig updateSimon Horman1-5/+10
Update marzen defconfig * Enable MMC Block device as SDHI hw is now supported. * Default to NFS root, this is consistent with many other shmobile boards * Enable UNIX which is required by udevd * Enable SDHI Other changes are noise due to using make savedefconfig to create the new defconfig. Cc: Phil Edworthy <phil.edworthy@renesas.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms@verge.net.au>
2012-01-10ARM: mach-shmobile: Add marzen defconfig.Paul Mundt1-0/+87
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-02 22:01:08 +0300