summaryrefslogtreecommitdiff
path: root/arch/arm/boot
AgeCommit message (Collapse)AuthorFilesLines
2014-03-05ARM: dts: OMAP4: Add device nodes for ABBAndrii.Tseglytskyi3-0/+89
Add ABB device nodes for OMAP443x family of devices. abb_iva is populated, but disabled as it is not used on current OMAP443x family, but the node is used on OMAP446x family. Data is based on OMAP443x Technical Reference Manual revision AN (April 2013). ABB device nodes for OMAP4460 device Data is based on OMAP4460 Technical Reference Manual revision Z (April 2013) [nm@ti.com: co-developer] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-05ARM: dts: OMAP36xx: Add device node for ABBAndrii.Tseglytskyi1-0/+20
Add ABB device node for OMAP36xx family of devices. Data is based on OMAP36XX Technical Reference Manual revision AB (Dec 2012). [nm@ti.com: co-developer] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-05ARM: dts: am43x-epos-evm: add SD card hotplug supportBalaji T K2-0/+10
Add card detect gpio for SD card slot and include dt gpio header. Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-05ARM: dts: am335x-evm: add SD card hotplug supportBalaji T K1-0/+9
Add card detect gpio for SD card slot Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-05ARM: dts: am437x gp-evm: add sd card dt nodesBalaji T K1-0/+27
enable sd card slot on am437x-gp-evm Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-05ARM: dts: omap5: added dt properties to adapt to the new phy framworkKishon Vijay Abraham I1-1/+4
Added device tree bindings for dwc3, usb2 and usb3 PHYs. The documentation of these can be found at Documentation/devicetree/bindings/phy/phy-bindings.txt and Documentation/devicetree/bindings/phy/ti-phy.txt. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-04ARM: OMAP2+: Use pdata quirks for wl12xx on the AM335x EV-MSKImre Kaloz1-0/+40
Enable the WiLink6 connected to mmc2. Signed-off-by: Imre Kaloz <kaloz@openwrt.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-04ARM: dts: Get rid of incompatible ids for hci-omap USB host nodesRoger Quadros3-6/+6
The OMAP EHCI and OHCI controllers are not compatible with drivers other than "ti,ehci-omap" and "ti,ohci-omap3" respectively, so get rid of the incompatible ids. CC: Alan Stern <stern@rowland.harvard.edu> CC: Nishant Menon <nm@ti.com> CC: Kevin Hilman <khilman@linaro.org> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-04ARM: OMAP2+: Remove legacy_init_ehci_clk()Roger Quadros2-12/+4
The necessary clock phandle for the EHCI clock is now provided via device tree so we no longer need this legacy method. Update the omap4-panda and omap5-uevm board DTS to provide the necessary EHCI PHY clock information. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-04ARM: dts: Add support for OMAP4 Gumstix DuoVero/ParlorFlorian Vaussard3-0/+399
Gumstix DuoVero is an OMAP4430-based Computer On Module. Parlor is one of the available expansion board. Tested features: - GPMC ethernet - HSUSB2 and OTG - Audio out - WiFi and Bluetooth (w2cbw0015 SDIO module) - LED and button Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-03Merge tag 'for_3.15/dts_signed' of ↵Tony Lindgren19-9/+716
git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt into omap-for-v3.15/dt Add craneboard devices Add more N900 devices Add am43x-epos-evm and am437x-gp-evm devices Add OMAP4 DMM devices Conflicts: arch/arm/boot/dts/am43x-epos-evm.dts arch/arm/boot/dts/dra7.dtsi
2014-03-03ARM: dts: omap4+: Add DMM bindingsArchit Taneja3-0/+21
Add Dynamic Memory Manager (DMM) bindings for OMAP4 and OMAP5 and DRA7x devices. DMM only requires address and irq information. Add documentation for the DMM bindings. Originally worked on by Andy Gross <andygro@gmail.com> Cc: Andy Gross <andygro@gmail.com> Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2014-03-03ARM: dts: am43x-gp-evm: Add matrix gpio keys.Sourav Poddar1-0/+21
Add gpio keys node for am43x gp evm. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2014-03-02ARM: dts: am43xx: add support for parallel NAND flashPekon Gupta2-0/+131
This patch: - enables GPMC h/w and ELM h/w engine for AM43xx devices (am4372.dtsi) - adds pinmux and DT node for Micron 4K-paged x8 NAND device (MT29F4G08AB) present on following boards: am43x-epos-evm: On this board, NAND Flash control lines are muxed with QSPI, Thus only one of the two can be used at a time. Selection is controlled by: (a) dynamically driving following GPIO pin from software GPMC_A0(GPIO) == 0 NAND is selected (default) GPMC_A0(GPIO) == 1 eMMC is selected Signed-off-by: Pekon Gupta <pekon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-02ARM: dts: AM33xx: updated default ECC scheme in nand-ecc-optPekon Gupta2-5/+3
This patch updated MTD/NAND DT node binding to replace deprecated bindings as per following commit. commit ac65caf514ec3e55e8d3d510ee37f80dd97418fe ARM: OMAP2+: cleaned-up DT support of various ECC schemes Also Refer: Documentation/devicetree/bindings/mtd/gpmc-nand.txt Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Pekon Gupta <pekon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-02ARM: dts: am335x-evm: NAND: update MTD partition tablePekon Gupta1-23/+25
This patch has following updates, specific to MTD/NAND DT - update MTD NAND partition table to keep compatibility between different boards and mainline u-boot. - prefix 'NAND.' in names of NAND device MTD partitions to differentiate them from other MTD device partitions (like NOR and QSPI) Partition_Name Partition_Size /dev/mtd0 NAND.SPL 1 block-size* /dev/mtd1 NAND.SPL.backup1 1 block-size* /dev/mtd2 NAND.SPL.backup2 1 block-size* /dev/mtd3 NAND.SPL.backup3 1 block-size* /dev/mtd5 NAND.u-boot-spl-os 2 block-size* [for falcon boot] /dev/mtd4 NAND.u-boot 1 MB /dev/mtd6 NAND.u-boot-env 1 block-size* /dev/mtd7 NAND.u-boot-env.backup1 1 block-size* /dev/mtd8 NAND.kernel till 0xA00000 /dev/mtd9 NAND.file-system till end of device * am335x-evm uses NAND device with block-size=128KiB Signed-off-by: Pekon Gupta <pekon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-02ARM: dts: omap3-gta04: Add bma180 accelerometerNeilBrown1-0/+8
Add node for bma180 driver. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-02ARM: dts: omap3-gta04: Enable mmc2 for wifiNeilBrown1-1/+8
This requires vaux4. Reset line isn't used yet, so wifi isn't reliable. But it does work once per boot. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Marek Belisko <marek@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-02ARM: dts: omap3-gta04: Add basic sound supportNeilBrown1-0/+14
This adds basic sound support for gta04 board. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Marek Belisko <marek@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-02ARM: dts: omap3-gta04: Add twl4030 chargerNeilBrown1-0/+4
Define twl4030 charger node used for charging. Signed-off-by: Marek Belisko <marek@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-02ARM: dts: omap3-gta04: Add touchscreen propertiesMarek Belisko1-0/+10
Gta04 using tcs2007 touchscreen. Add support for that. Signed-off-by: Marek Belisko <marek@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-02ARM: dts: omap3-gta04: Add support for magnetometerNeilBrown1-0/+6
Add magnetometer hmc5843 node. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Marek Belisko <marek@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-02ARM: dts: am437x-gp-evm: Enable gpio.Sourav Poddar1-0/+8
Enable gpio3, gpio4, it will be used by gpio matrix keys. Also, can be used by othe peripherals. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2014-03-02ARM: dts: am437x-gp-evm: Add pwm backlight support.Sourav Poddar1-0/+24
Add pwm backlight support for gp evm. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2014-03-02ARM: dts: am437x-gp-evm: Add gp dts.Lokesh Vutla2-0/+48
AM437x GP EVM DTS with pinmux information to make I2C on EVM usable. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2014-03-02ARM: dts: am43x-epos-evm: Add SPI data.Sourav Poddar1-0/+30
Add SPI dts data. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2014-03-02ARM: dts: am43x-epos-evm: Add I2C2 data.Sourav Poddar1-0/+13
Add I2C2 dts data. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2014-03-02ARM: dts: am43x-epos-evm: Add pwm backlight support.Sourav Poddar1-0/+24
Add pwm backlight support for am43x epos evm. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2014-03-02ARM: dts: am4372: Add pwm-cells property for ecap device.Sourav Poddar1-0/+9
Add "pwm-cells" node for all ecap, ehrpwm in am43x dtsi files. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2014-03-02ARM: dts: OMAP3-N900: Add bq24150a supportSebastian Reichel1-0/+14
This adds support for the bq24150a chip to the Nokia N900 DTS file. Signed-off-by: Sebastian Reichel <sre@debian.org> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2014-03-02ARM: dts: OMAP3-N900: Add isp1704 supportSebastian Reichel1-0/+5
This adds support for the isp1704 chip to the Nokia N900 DTS file. Signed-off-by: Sebastian Reichel <sre@debian.org> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2014-03-02ARM: dts: OMAP3-N900: Add tpa6130a2 supportSebastian Reichel1-0/+9
This adds support for the N900's headphone amplifier to the N900 DTS file. Signed-off-by: Sebastian Reichel <sre@debian.org> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2014-03-02ARM: dts: OMAP3-N900: Add support for tsl2563Sebastian Reichel1-0/+7
Add support for tsl2563 light sensor to the Nokia N900. Signed-off-by: Sebastian Reichel <sre@debian.org> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2014-03-02ARM: dts: OMAP3-N900: Add TWL4030 Keypad MatrixSebastian Reichel1-0/+55
Add Keyboard Matrix information to N900's DTS file. This patch maps the keys exactly as the original board code. Signed-off-by: Sebastian Reichel <sre@debian.org> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2014-03-02ARM: dts: TWL4030: Add keypad nodeSebastian Reichel1-0/+7
Add keypad node to twl4030, so that board DTS files can just add the keymap. Signed-off-by: Sebastian Reichel <sre@debian.org> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2014-03-02ARM: dts: omap3430-sdp: add dip switch information for MMC operationNishanth Menon1-0/+4
MMC 8 bit mode operation depends on dip switch setting which is not obvious - The current board file has this description. However, with removal of the board file in the future, this information will be lost and has to be rediscovered. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2014-03-02ARM: dts: Add basic devices for AM3517-craneboardNishanth Menon2-0/+175
Craneboard is a hardware development platform based on the Sitara AM3517 ARM Cortex - A8 microprocessor device - see [1] for more details. Add basic devices for craneboard as replacement for the board file scheduled for removal as part of device tree conversion [1] http://craneboard.org Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2014-03-01ARM: dts: am335x-evmsk: enable USB1Yegor Yefremov1-0/+9
Enable second USB channel and set it into 'host' mode. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-01arm: dts: am33xx.dtsi: Add node name to rtc device nodeStefan Roese1-1/+1
Making it possible to reference and therefor change (disable) this device node from other dts file which import this dtsi file. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Lukas Stockmann <lukas.stockmann@siemens.com> Cc: Benoit Cousson <bcousson@baylibre.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-01ARM: dts: AM33XX: Add ecap interrupt propertiesMatt Porter1-0/+6
Add missing interrupt properties to the ecap0, ecap1, and ecap2 nodes. Signed-off-by: Matt Porter <mporter@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-01ARM: dts: OMAP3+: add clock nodes for CPUNishanth Menon6-0/+30
OMAP34xx, AM3517 and OMAP36xx platforms use dpll1 clock. OMAP443x, OMAP446x, OMAP447x, OMAP5, DRA7, AM43xx platforms use dpll_mpu clock. Latency used is the generic latency defined in omap-cpufreq driver. Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Acked-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-01ARM: dts: omap3: Add support for INCOstartec DBB056 baseboardChristoph Fritz2-0/+171
INCOstartec LILLY-DBB056 is a carrier board (baseboard) for computer-on-module LILLY-A83X. This patch adds device-tree support for most of its features. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-01ARM: dts: omap3: Add support for INCOstartec a83x moduleChristoph Fritz1-0/+459
INCOstartec LILLY-A83X module is a TI DM3730xx100 (OMAP3) SoC computer-on-module. This patch adds device tree support for most of its features. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-01ARM: dts: am335x-evmsk: Correct audio clock frequencyPeter Ujfalusi1-1/+1
The clock for audio is sourced from virt_24000000_ck, so the correct frequency is 24000000. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> CC: <stable@vger.kernel.org> # 3.13.x Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-01ARM: dts: omap2: Set disabled status for McBSP instances as default statePeter Ujfalusi2-0/+7
In omap2420.dtsi and omap2430.dtsi disable all mcbsp nodes and board dts files can explicitly enable the mcbsp they are using. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-01ARM: dts: omap3: Set disabled status for McBSP instances as default statePeter Ujfalusi6-14/+20
In omap3.dtsi disable all mcbsp nodes and board dts files can explicitly enable the mcbsp they are using. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-01ARM: dts: omap5: Set all audio related IP's status to disabled as defaultPeter Ujfalusi1-0/+5
Board dts files will need to enable the IP nodes which they are using and does not have to care about the not used ones (to disable them). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-01ARM: dts: omap4-sdp: No need to disable mcbsp3 nodePeter Ujfalusi1-4/+0
All audio nodes has been set to disabled state in omap4.dtsi file. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-01ARM: dts: omap4-panda-common: No need to disable the unused audio nodesPeter Ujfalusi1-12/+0
All audio nodes has been set to disabled state in omap4.dtsi file. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-01ARM: dts: omap4: Set all audio related IP's status to disabled as defaultPeter Ujfalusi1-0/+6
Board dts files will need to enable the IP nodes which they are using and does not have to care about the not used ones (to disable them). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-22 02:16:50 +0300