summaryrefslogtreecommitdiff
path: root/arch/arm/boot
AgeCommit message (Collapse)AuthorFilesLines
2012-01-05Merge branch 'devel-stable' into for-linusRussell King1-0/+1
Conflicts: arch/arm/kernel/setup.c arch/arm/mach-shmobile/board-kota2.c
2012-01-03ARM: 7184/1: fix $(CROSS_COMPILE) prefix missing from size invocationJanusz Krzysztofik1-1/+2
Otherwise, cross compilation may fail with error messages like: ... size: arch/arm/boot/compressed/../../../../vmlinux: File format is ambiguous size: Matching formats: elf32-littlearm elf32-littlearm-symbian elf32-littlearm-vxworks LD arch/arm/boot/compressed/vmlinux arm-angstrom-linux-uclibcgnueabi-ld:--defsym _kernel_bss_size=: syntax error Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-12-08Merge branch 'for-rmk' of ↵Russell King1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux into devel-stable Conflicts: arch/arm/mm/ioremap.c
2011-12-08ARM: LPAE: add ISBs around MMU enabling codeWill Deacon1-0/+1
Before we enable the MMU, we must ensure that the TTBR registers contain sane values. After the MMU has been enabled, we jump to the *virtual* address of the following function, so we also need to ensure that the SCTLR write has taken effect. This patch adds ISB instructions around the SCTLR write to ensure the visibility of the above. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2011-11-21Merge branch 'fixes' of ↵Linus Torvalds1-0/+2
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'fixes' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: ARM: wire up process_vm_writev and process_vm_readv syscalls ARM: 7160/1: setup: avoid overflowing {elf,arch}_name from proc_info_list ARM: 7158/1: add new MFP implement for NUC900 ARM: 7157/1: fix a building WARNING for nuc900 ARM: 7156/1: l2x0: fix compile error on !CONFIG_USE_OF ARM: 7155/1: arch.h: Declare 'pt_regs' locally ARM: 7154/1: mach-bcmring: fix build error in dma.c ARM: 7153/1: mach-bcmring: fix build error in core.c ARM: 7152/1: distclean: Remove generated .dtb files ARM: 7150/1: Allow kernel unaligned accesses on ARMv6+ processors ARM: 7149/1: spi/pl022: Enable clock in probe Revert "ARM: 7098/1: kdump: copy kernel relocation code at the kexec prepare stage"
2011-11-09arm/dt: Fix ventana SDHCI power-gpiosStephen Warren1-2/+1
Ventana uses the same SDHCI GPIOs as Seaboard; PI6 (70) is the power GPIO for the SD port, and there is no power GPIO for the MMC chip. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-11-08ARM: 7152/1: distclean: Remove generated .dtb filesDirk B1-0/+2
The patch 'arm/dt: Add dtb make rule' adds support to create a .dtb file. But this is never removed afterwards. Remove the generated .dtb file if 'distclean' is called. Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Jason Liu <jason.hui@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-02Merge branch 'next/soc' of git://git.linaro.org/people/arnd/arm-socLinus Torvalds7-0/+1627
* 'next/soc' of git://git.linaro.org/people/arnd/arm-soc: (21 commits) MAINTAINERS: add ARM/FREESCALE IMX6 entry arm/imx: merge i.MX3 and i.MX6 arm/imx6q: add suspend/resume support arm/imx6q: add device tree machine support arm/imx6q: add smp and cpu hotplug support arm/imx6q: add core drivers clock, gpc, mmdc and src arm/imx: add gic_handle_irq function arm/imx6q: add core definitions and low-level debug uart arm/imx6q: add device tree source ARM: highbank: add suspend support ARM: highbank: Add cpu hotplug support ARM: highbank: add SMP support MAINTAINERS: add Calxeda Highbank ARM platform ARM: add Highbank core platform support ARM: highbank: add devicetree source ARM: l2x0: add empty l2x0_of_init picoxcell: add a definition of VMALLOC_END picoxcell: remove custom ioremap implementation picoxcell: add the DTS for the PC7302 board picoxcell: add the DTS for pc3x2 and pc3x3 devices ... Fix up trivial conflicts in arch/arm/Kconfig, and some more header file conflicts in arch/arm/mach-omap2/board-generic.c (as per an ealier merge by Arnd).
2011-11-02Merge branch 'next/dt' of git://git.linaro.org/people/arnd/arm-socLinus Torvalds12-0/+1523
* 'next/dt' of git://git.linaro.org/people/arnd/arm-soc: ARM: gic: use module.h instead of export.h ARM: gic: fix irq_alloc_descs handling for sparse irq ARM: gic: add OF based initialization ARM: gic: add irq_domain support irq: support domains with non-zero hwirq base of/irq: introduce of_irq_init ARM: at91: add at91sam9g20 and Calao USB A9G20 DT support ARM: at91: dt: at91sam9g45 family and board device tree files arm/mx5: add device tree support for imx51 babbage arm/mx5: add device tree support for imx53 boards ARM: msm: Add devicetree support for msm8660-surf msm_serial: Add devicetree support msm_serial: Use relative resources for iomem Fix up conflicts in arch/arm/mach-at91/{at91sam9260.c,at91sam9g45.c}
2011-11-02Merge branch 'next/cleanup2' of git://git.linaro.org/people/arnd/arm-socLinus Torvalds5-0/+253
* 'next/cleanup2' of git://git.linaro.org/people/arnd/arm-soc: (31 commits) ARM: OMAP: Warn if omap_ioremap is called before SoC detection ARM: OMAP: Move set_globals initialization to happen in init_early ARM: OMAP: Map SRAM later on with ioremap_exec() ARM: OMAP: Remove calls to SRAM allocations for framebuffer ARM: OMAP: Avoid cpu_is_omapxxxx usage until map_io is done ARM: OMAP1: Use generic map_io, init_early and init_irq arm/dts: OMAP3+: Add mpu, dsp and iva nodes arm/dts: OMAP4: Add a main ocp entry bound to l3-noc driver ARM: OMAP2+: l3-noc: Add support for device-tree ARM: OMAP2+: board-generic: Add i2c static init ARM: OMAP2+: board-generic: Add DT support to generic board arm/dts: Add support for OMAP3 Beagle board arm/dts: Add initial device tree support for OMAP3 SoC arm/dts: Add support for OMAP4 SDP board arm/dts: Add support for OMAP4 PandaBoard arm/dts: Add initial device tree support for OMAP4 SoC ARM: OMAP: omap_device: Add a method to build an omap_device from a DT node ARM: OMAP: omap_device: Add omap_device_[alloc|delete] for DT integration of: Add helpers to get one string in multiple strings property ARM: OMAP2+: devices: Remove all omap_device_pm_latency structures ... Fix up trivial header file conflicts in arch/arm/mach-omap2/board-generic.c
2011-11-02Merge branch 'next/devel' of git://git.linaro.org/people/arnd/arm-socLinus Torvalds2-0/+40
* 'next/devel' of git://git.linaro.org/people/arnd/arm-soc: (50 commits) ARM: tegra: update defconfig arm/tegra: Harmony: Configure PMC for low-level interrupts arm/tegra: device tree support for ventana board arm/tegra: add support for ventana pinmuxing arm/tegra: prepare Seaboard pinmux code for derived boards arm/tegra: pinmux: ioremap registers gpio/tegra: Convert to a platform device arm/tegra: Convert pinmux driver to a platform device arm/dt: Tegra: Add pinmux node to tegra20.dtsi arm/tegra: Prep boards for gpio/pinmux conversion to pdevs ARM: mx5: fix clock usage for suspend ARM i.MX entry-macro.S: remove now unused code ARM i.MX boards: use CONFIG_MULTI_IRQ_HANDLER ARM i.MX tzic: add handle_irq function ARM i.MX avic: add handle_irq function ARM: mx25: Add the missing IIM base definition ARM i.MX avic: convert to use generic irq chip mx31moboard: Add poweroff support ARM: mach-qong: Add watchdog support ARM: davinci: AM18x: Add wl1271/wlan support ... Fix up conflicts in: arch/arm/mach-at91/at91sam9g45.c arch/arm/mach-mx5/devices-imx53.h arch/arm/plat-mxc/include/mach/memory.h
2011-11-02Merge branch 'next/pm' of git://git.linaro.org/people/arnd/arm-socLinus Torvalds1-3/+11
* 'next/pm' of git://git.linaro.org/people/arnd/arm-soc: (66 commits) ARM: CSR: PM: use outer_resume to resume L2 cache ARM: CSR: call l2x0_of_init to init L2 cache of SiRFprimaII ARM: OMAP: voltage: voltage layer present, even when CONFIG_PM=n ARM: CSR: PM: add sleep entry for SiRFprimaII ARM: CSR: PM: save/restore irq status in suspend cycle ARM: CSR: PM: save/restore timer status in suspend cycle OMAP4: PM: TWL6030: add cmd register OMAP4: PM: TWL6030: fix ON/RET/OFF voltages OMAP4: PM: TWL6030: address 0V conversions OMAP4: PM: TWL6030: fix uv to voltage for >0x39 OMAP4: PM: TWL6030: fix voltage conversion formula omap: voltage: add a stub header file for external/regulator use OMAP2+: VC: more registers are per-channel starting with OMAP5 OMAP3+: voltage: update nominal voltage in voltdm_scale() not VC post-scale OMAP3+: voltage: rename omap_voltage_get_nom_volt -> voltdm_get_voltage OMAP3+: voltdm: final removal of omap_vdd_info OMAP3+: voltage: move/rename curr_volt from vdd_info into struct voltagedomain OMAP3+: voltage: rename scale and reset functions using voltdm_ prefix OMAP3+: VP: combine setting init voltage into common function OMAP3+: VP: remove unused omap_vp_get_curr_volt() ... Fix up trivial conflict in arch/arm/mach-prima2/l2x0.c (code removal vs edit)
2011-11-02Merge branch 'next/fixes' of git://git.linaro.org/people/arnd/arm-socLinus Torvalds2-0/+5
* 'next/fixes' of git://git.linaro.org/people/arnd/arm-soc: (28 commits) ARM: pxa/cm-x300: properly set bt_reset pin ARM: mmp: rename SHEEVAD to GPLUGD ARM: imx: Fix typo 'MACH_MX31_3DS_MXC_NAND_USE_BBT' ARM: i.MX28: shift frac value in _CLK_SET_RATE plat-mxc: iomux-v3.h: implicitly enable pull-up/down when that's desired ARM: mx5: fix clock usage for suspend ARM: pxa: use correct __iomem annotations ARM: pxa: sharpsl pm needs SPI ARM: pxa: centro and treo680 need palm27x ARM: pxa: make pxafb_smart_*() empty when not enabled ARM: pxa: select POWER_SUPPLY on raumfeld ARM: pxa: pxa95x is incompatible with earlier pxa ARM: pxa: CPU_FREQ_TABLE is needed for CPU_FREQ ARM: pxa: pxa95x/saarb depends on pxa3xx code ARM: pxa: allow selecting just one of TREO680/CENTRO ARM: pxa: export symbols from pxa3xx-ulpi ARM: pxa: make zylonite_pxa*_init declaration match code ARM: pxa/z2: fix building error of pxa27x_cpu_suspend() no longer available ARM: at91: add defconfig for at91sam9g45 family ARM: at91: remove dependency for Atmel PWM driver selector in Kconfig ...
2011-11-02Merge branch 'imx/imx6q' into next/socArnd Bergmann2-0/+637
Conflicts: Documentation/devicetree/bindings/arm/fsl.txt arch/arm/Kconfig arch/arm/Kconfig.debug arch/arm/plat-mxc/include/mach/common.h
2011-11-02Merge branch 'picoxcell/soc' into next/socArnd Bergmann4-0/+792
2011-11-02Merge branch 'highbank/soc' into next/socArnd Bergmann1-0/+198
Conflicts: arch/arm/mach-mxs/include/mach/gpio.h arch/arm/mach-omap2/board-generic.c arch/arm/plat-mxc/include/mach/gpio.h
2011-10-31arm/imx6q: add device tree sourceShawn Guo2-0/+637
It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-10-31Merge branch 'depends/rmk/devel-stable' into imx/imx6qArnd Bergmann8-52/+395
2011-10-31ARM: highbank: add devicetree sourceRob Herring1-0/+198
This adds the devicetree source and documentation for the Calxeda highbank platform. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Jamie Iles <jamie@jamieiles.com> Reviewed-by: Shawn Guo <shawn.guo@linaro.org>
2011-10-31Merge branch 'dt/gic' into next/dtArnd Bergmann8-52/+395
Conflicts: arch/arm/include/asm/localtimer.h arch/arm/mach-msm/board-msm8x60.c arch/arm/mach-omap2/board-generic.c
2011-10-31Merge branch 'omap/dt' into next/dtArnd Bergmann5-0/+253
2011-10-31Merge branches 'msm/dt', 'imx/dt' and 'at91/dt' into next/dtArnd Bergmann15-11/+1510
2011-10-28Merge branch 'devel-stable' of ↵Linus Torvalds8-52/+396
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'devel-stable' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: (178 commits) ARM: 7139/1: fix compilation with CONFIG_ARM_ATAG_DTB_COMPAT and large TEXT_OFFSET ARM: gic, local timers: use the request_percpu_irq() interface ARM: gic: consolidate PPI handling ARM: switch from NO_MACH_MEMORY_H to NEED_MACH_MEMORY_H ARM: mach-s5p64x0: remove mach/memory.h ARM: mach-s3c64xx: remove mach/memory.h ARM: plat-mxc: remove mach/memory.h ARM: mach-prima2: remove mach/memory.h ARM: mach-zynq: remove mach/memory.h ARM: mach-bcmring: remove mach/memory.h ARM: mach-davinci: remove mach/memory.h ARM: mach-pxa: remove mach/memory.h ARM: mach-ixp4xx: remove mach/memory.h ARM: mach-h720x: remove mach/memory.h ARM: mach-vt8500: remove mach/memory.h ARM: mach-s5pc100: remove mach/memory.h ARM: mach-tegra: remove mach/memory.h ARM: plat-tcc: remove mach/memory.h ARM: mach-mmp: remove mach/memory.h ARM: mach-cns3xxx: remove mach/memory.h ... Fix up mostly pretty trivial conflicts in: - arch/arm/Kconfig - arch/arm/include/asm/localtimer.h - arch/arm/kernel/Makefile - arch/arm/mach-shmobile/board-ap4evb.c - arch/arm/mach-u300/core.c - arch/arm/mm/dma-mapping.c - arch/arm/mm/proc-v7.S - arch/arm/plat-omap/Kconfig largely due to some CONFIG option renaming (ie CONFIG_PM_SLEEP -> CONFIG_ARM_CPU_SUSPEND for the arm-specific suspend code etc) and addition of NEED_MACH_MEMORY_H next to HAVE_IDE.
2011-10-25ARM: at91: add at91sam9g20 and Calao USB A9G20 DT supportJean-Christophe PLAGNIOL-VILLARD2-0/+149
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Reviewed-by: Rob Herring <rob.herring@calxeda.com>
2011-10-25ARM: at91: dt: at91sam9g45 family and board device tree filesNicolas Ferre2-0/+141
Create a new device tree source file for Atmel at91sam9g45 SoC family. The Evaluation Kit at91sam9m10g45ek includes it. This first basic support will be populated as drivers and boards will be converted to device tree. Contains serial, dma and interrupt controllers. The generic board file still takes advantage of platform data for early serial init. As we need a storage media and the NAND flash driver is not converted to DT yet, we keep old initialization for it. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Reviewed-by: Rob Herring <rob.herring@calxeda.com>
2011-10-25Merge branch 'misc' into for-linusRussell King2-0/+17
Conflicts: arch/arm/mach-integrator/integrator_ap.c
2011-10-24ARM: 7139/1: fix compilation with CONFIG_ARM_ATAG_DTB_COMPAT and large ↵Nicolas Pitre1-1/+2
TEXT_OFFSET If TEXT_OFFSET is too large (e.g. like on MSM) the resulting immediate argument gets wider than 8 bits. Noticed by David Brown <davidb@codeaurora.org> Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-24Merge remote-tracking branch 'rmk/devel-stable' into HEADRob Herring8-52/+395
2011-10-24ARM: CSR: call l2x0_of_init to init L2 cache of SiRFprimaIIBarry Song1-1/+4
Cc: Rob Herring <robherring2@gmail.com> Signed-off-by: Barry Song <Baohua.Song@csr.com>
2011-10-20Merge branch 'tegra/devel' into next/develArnd Bergmann2-0/+40
2011-10-20Merge branch 'imx/devel' into next/develArnd Bergmann2-9/+9
2011-10-18arm/mx5: add device tree support for imx51 babbageShawn Guo2-0/+381
It adds device tree support for imx51 babbage board. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-18arm/mx5: add device tree support for imx53 boardsShawn Guo5-0/+828
It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17ARM: 7120/1: remove bashism in check for multiple zreladdrsRabin Vincent1-1/+1
Get rid of this complaint from dash: AS arch/arm/boot/compressed/lib1funcs.o /bin/sh: 1: [: y: unexpected operator LD arch/arm/boot/compressed/vmlinux Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-17ARM: 7021/1: Check for multiple load addresses before building a uImageSascha Hauer1-0/+9
uImages need a load address specified. This makes them incompatible with multiple zreladdrs. Catch this error before building an uImage so that we do not end up with broken uImages. The load address can still be specified with LOADADDR= on the command line. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-17ARM: 7020/1: Check for multiple zreladdrsSascha Hauer1-0/+8
Without CONFIG_AUTO_ZRELADDR being set the kernel needs a single zreladdr for building zImages. Bail out if we detect multiple zreladdrs without CONFIG_AUTO_ZRELADDR. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-14arm/tegra: device tree support for ventana boardPeter De Schrijver1-0/+32
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-10-12arm/dt: Tegra: Add pinmux node to tegra20.dtsiStephen Warren1-0/+8
Add a pinmux node to tegra20.dtsi in order to instantiate the future pinmux device. v2: Specify reg property precisely; don't just point at the whole APB_MISC register range. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-10-05arm/dts: OMAP3+: Add mpu, dsp and iva nodesBenoit Cousson2-0/+42
Add nodes for devices used by PM code (mpu, dsp, iva). Add a cpus node as well as recommended in the DT spec. Remove mpu, dsp, iva devices init if is populated. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: Kevin Hilman <khilman@ti.com>
2011-10-05arm/dts: OMAP4: Add a main ocp entry bound to l3-noc driverBenoit Cousson1-1/+2
Used the main OCP node to add bindings with the l3_noc driver. Remove l3_noc static device creation if DT is populated. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
2011-10-05arm/dts: Add support for OMAP3 Beagle boardBenoit Cousson1-0/+29
Add OMAP3 beagleboard DTS file to use the omap3.dtsi SoC file. Add a default bootargs line to allow a boot from RAMDISK. Add memory node information. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: G, Manjunath Kondaiah <manjugk@ti.com>
2011-10-05arm/dts: Add initial device tree support for OMAP3 SoCBenoit Cousson1-0/+44
Add initial OMAP3 soc file with empty ocp bus. Based on initial patch from Manju: http://www.spinics.net/lists/linux-omap/msg55830.html Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: G, Manjunath Kondaiah <manjugk@ti.com>
2011-10-05arm/dts: Add support for OMAP4 SDP boardBenoit Cousson1-0/+29
Add the SDP/Blaze (Software Development Board) support with device tree. That file is based on the omap4-panda.dts. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: G, Manjunath Kondaiah <manjugk@ti.com>
2011-10-05arm/dts: Add support for OMAP4 PandaBoardBenoit Cousson1-0/+29
Based on the original omap4-panda.dts file from Manju. http://www.spinics.net/lists/linux-omap/msg55836.html Add memory information and a default bootargs to allow a boot from RAMDISK. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: G, Manjunath Kondaiah <manjugk@ti.com>
2011-10-05arm/dts: Add initial device tree support for OMAP4 SoCBenoit Cousson1-0/+79
Add initial device-tree support for OMAP4 SoC. This is based on the original panda board patch done by Manju: http://permalink.gmane.org/gmane.linux.ports.arm.omap/60393 Add the generic GIC interrupt-controller from ARM. Add an empty "soc" node to contain non memory mapped IPs (DSP, MPU, IPU...). Note: Since reg, irq and dma are provided by hwmod for the moment, these attributes will not be present at all in DTS to highlight the gap. They will be added as soon as dma bindings will be there and drivers will be adapted. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: G, Manjunath Kondaiah <manjugk@ti.com>
2011-09-26picoxcell: add the DTS for the PC7302 boardJamie Iles2-0/+178
The PC7302 board can be populated with either a PC3X2 or PC3X3 device. Add DTS files for both variants of the PC7302. v3: - remove bootargs from dts files Signed-off-by: Jamie Iles <jamie@jamieiles.com>
2011-09-26picoxcell: add the DTS for pc3x2 and pc3x3 devicesJamie Iles2-0/+614
This describes the basic hierarchy of picoxcell pc3x3 devices including clocks and bus interconnect. Some onchip devices are currently omitted as there haven't been bindings created for them. v2: - change timer compatible strings to be more soc specific - split vic node into 2 devices Signed-off-by: Jamie Iles <jamie@jamieiles.com>
2011-09-22arm/dt: Tegra: Add support-8bit to SDHCI nodesStephen Warren2-0/+5
For Seaboard's internal eMMC, this makes the difference between a 5.5MB/s and 10.2MB/s transfer rate. On Harmony, there wasn't any measurable difference on my cheap/slow ~2MB/s card. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-09-21arm/dt: Tegra: Update SDHCI nodes to match bindingsStephen Warren2-9/+9
The bindings were recently updated to have separate properties for each type of GPIO. Update the Device Tree source to match that. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-09-17Merge branch 'for-rmk' of git://linux-arm.org/linux-2.6-wd into devel-stableRussell King2-2/+2
Conflicts: arch/arm/mach-imx/mach-cpuimx27.c
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-24 11:55:28 +0300