summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/rk3066a.dtsi
AgeCommit message (Collapse)AuthorFilesLines
2015-12-14ARM: dts: rockchip: add eFuse node for rk3066a SoCsCaesar Wang1-0/+13
This patch add the eFuse dt node for rk3066a SoCs. Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-11-20ARM: dts: rockchip: add channels properties for i2sSugar Zhang1-0/+6
add playback and capture properties to compatible various chips. Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-08-08ARM: dts: rockchip: add usb phys to Cortex-A9 socsHeiko Stuebner1-0/+22
This adds the usbphy nodes to rk3066 and rk3188, which share the usb hosts in rk3xxx.dtsi and also enables it on boards based around these socs. The usb-phy itself is the same as used on the rk3288 already. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-05-13ARM: dts: rockchip: relicense rk3066a.dtsi under GPLv2/X11Heiko Stuebner1-8/+36
GPLv2-only devicetrees make reuse difficult for software components licensed under a different license. The consensus is that a GPL/X11 dual-license should allow all necessary uses, so relicense the rk3066a.dtsi to this combination. CCs were aquired by git shortlog -sne so it should've hopefully catched every contributor. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Beniamino Galvani <b.galvani@gmail.com> Acked-by: Romain Perier <romain.perier@gmail.com> Acked-by: Julien Chauveau <chauveau.julien@gmail.com>
2014-11-02ARM: dts: rockchip: Add EMAC Rockchip for RK3066 SoCsRomain Perier1-0/+22
This patch adds the right pins topology for the MAC and MDIO found in RK3066 SoCs. Boards based on this SoC have an initial support for the emac-rockchip dt-binding. Signed-off-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-10-20ARM: dts: rockchip: add I2S controllers for rk3066 and rk3188Julien CHAUVEAU1-0/+81
Add the I2S/PCM controller nodes and pin controls for rk3066 and rk3188. Signed-off-by: Julien CHAUVEAU <julien.chauveau@neo-technologies.fr> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-10-20ARM: dts: rockchip: add operating points and armclk referencesHeiko Stuebner1-1/+11
Add basic OPP entries for current supported Rockchip SoCs. The operating points are currently very conservative, so individual boards may opt to redefine them. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2014-09-13ARM: dts: rockchip: add emmc nodes for rk3066 and rk3188Heiko Stuebner1-0/+21
Add the controller node, pinctrl settings for the customizable pins and sort the controllers like on rk3288 as emmc, sdmmc, sdio for handling convenience. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-09-13ARM: dts: rockchip: add Cortex-A9 SPI controller nodesHeiko Stuebner1-0/+46
This adds basic spi nodes and pinctrl settings to the rk3066 and rk3188 devicetree files. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-07-30ARM: dts: rockchip: add watchdog nodeHeiko Stuebner1-0/+4
This adds the Designware compatible watchdog found on RK3xxx Cortex-A9 SoCs. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-07-27ARM: dts: rockchip: add pwm nodesBeniamino Galvani1-0/+44
This adds the necessary nodex and pinctrl settings for the Rockchip PWM-driver. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Modified to use the new clock defines and added rk3066 pins. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-07-27ARM: dts: add rk3066 and rk3188 i2c device nodes and pinctrl settingsHeiko Stuebner1-0/+60
The core controller settings themself are identical, only the compatible and pinctrl settings differ. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-07-27ARM: dts: rockchip: oder nodes by register addressHeiko Stuebner1-24/+24
To create some sort of ordering of nodes, they are suggested to be ordered by their register address. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-07-27ARM: dts: rockchip: remove address from pinctrl nodesHeiko Stuebner1-1/+1
The pincontroller uses the GRF and PMU syscons nowadays, so should not contain an address in its device node. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-07-27ARM: dts: uses handles to reference nodes for changesHeiko Stuebner1-0/+30
Use the handles for subsequent changes to nodes, similar to like the rk3288 submission does it. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-07-27ARM: dts: rockchip: add handles for shared nodes that don't have one yetHeiko Stuebner1-1/+1
Some nodes that are changed in the dtsi hierarchy do not have handles yet. As it was suggested in the rk3288 submission to do subsequent nodes changes through such handle-references, add the missing ones. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-07-27ARM: dts: rockchip: remove soc subnodesHeiko Stuebner1-196/+194
Comments received from the rk3288 submission indicated that a generic subnode to group soc components should not be used. So to keep all rockchip devicetree files similar, remove it from rk3066 and rk3188. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-07-27arm: dts: rockchip: remove obsolete clock gate definitionsHeiko Stuebner1-1/+0
The clock and reset unit is now provided by the rk3188-cru clock driver and thus the old style definitions of the gate clocks can go away. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de>
2014-07-27ARM: dts: rockchip: add cru nodes and update device clocks to use itHeiko Stuebner1-9/+19
This adds a node for the clock and reset unit on rk3188 and rk3066 SoCs and also updates the device nodes retrieve their clocks from there, instead of the previous gate clock nodes. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de>
2014-06-03Merge tag 'dt-for-3.16' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into next Pull ARM SoC devicetree updates from Olof Johansson: "As with previous release, this continues to be among the largest branches we merge, with lots of new contents. New things for this release are among other things: - DTSI contents for the new SoCs supported in 3.16 (see SoC pull request) - Qualcomm APQ8064 and APQ8084 SoCs and eval boards - Nvidia Jetson TK1 development board (Tegra T124-based) Two new SoCs that didn't need enough new platform code to stand out enough for me to notice when writing the SoC tag, but that adds new DT contents are: - TI DRA72 - Marvell Berlin 2Q" * tag 'dt-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (500 commits) ARM: dts: add secure firmware support for exynos5420-arndale-octa ARM: dts: add pmu sysreg node to exynos3250 ARM: dts: correct the usb phy node in exynos5800-peach-pi ARM: dts: correct the usb phy node in exynos5420-peach-pit ARM: dts: add dts files for exynos5410 and exynos5410-smdk5410 ARM: dts: add dts files for exynos3250 SoC ARM: dts: add mfc node for exynos5800 ARM: dts: add Vbus regulator for USB 3.0 on exynos5800-peach-pi ARM: dts: enable fimd for exynos5800-peach-pi ARM: dts: enable display controller for exynos5800-peach-pi ARM: dts: enable hdmi for exynos5800-peach-pi ARM: dts: add dts file for exynos5800-peach-pi board ARM: dts: add dts file for exynos5800 SoC ARM: dts: add dts file for exynos5260-xyref5260 board ARM: dts: add dts files for exynos5260 SoC ARM: dts: update watchdog node name in exynos5440 ARM: dts: use key code macros on Origen and Arndale boards ARM: dts: enable RTC and WDT nodes on Origen boards ARM: dts: qcom: Add APQ8084-MTP board support ARM: dts: qcom: Add APQ8084 SoC support ...
2014-05-26ARM: rockchip: convert smp bringup to CPU_METHOD_OF_DECLAREHeiko Stübner1-0/+1
With the newly introduced CPU_METHOD_OF_DECLARE is not necessary anymore to reference the relevant smp_ops in the board file, but instead it can simply be set by the enable-method property of the cpu nodes. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-10ARM: dts: rockchip: convert pinctrl nodes to new bindingsHeiko Stuebner1-1/+1
Introduce the grf syscon and convert the pinctrl drivers for rk3066 and rk3188 to use it, instead of mapping the grf registers themselfs. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Max Schwarz <max.schwarz@online.de> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-01ARM: rockchip: add sram dt nodes and documentationHeiko Stuebner1-0/+13
Add dt-nodes for the sram on rk3066 and rk3188 including the reserved section needed for smp bringup. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Ulrich Prinz <ulrich.prinz@googlemail.com>
2013-11-11Merge tag 'boards-for-linus' of ↵Linus Torvalds1-97/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC board updates from Olof Johansson: "Board-related updates. This branch is getting smaller and smaller, which is the whole idea so that's reassuring. Right now by far most of the code is related to shmobile updates, and they are now switching over to removal of board code and migration to multiplatform, so we'll see their board code base shrink in the near future too, I hope. In addition to that is some defconfig updates, some display updates for OMAP and a bit of new board support for Rockchip boards" * tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (56 commits) ARM: rockchip: add support for rk3188 and Radxa Rock board ARM: rockchip: add dts for bqcurie2 tablet ARM: rockchip: enable arm-global-timer ARM: rockchip: move shared dt properties to common source file ARM: OMAP2+: display: Create omap_vout device inside omap_display_init ARM: OMAP2+: display: Create omapvrfb and omapfb devices inside omap_display_init ARM: OMAP2+: display: Create omapdrm device inside omap_display_init ARM: OMAP2+: drm: Don't build device for DMM ARM: tegra: defconfig updates RX-51: Add support for OMAP3 ROM Random Number Generator ARM: OMAP3: RX-51: ARM errata 430973 workaround ARM: OMAP3: Add secure function omap_smc3() which calling instruction smc #1 ARM: shmobile: marzen: enable INTC IRQ ARM: shmobile: bockw: add SMSC support on reference ARM: shmobile: Use SMP on Koelsch ARM: shmobile: Remove KZM9D reference DTS ARM: shmobile: Let KZM9D multiplatform boot with KZM9D DTB ARM: shmobile: Remove non-multiplatform KZM9D reference support ARM: shmobile: Use KZM9D without reference for multiplatform ARM: shmobile: Sync KZM9D DTS with KZM9D reference DTS ...
2013-10-15ARM: rockchip: move shared dt properties to common source fileHeiko Stuebner1-97/+1
The rk3188 SoC shares a lot of peripherals with the rk3066 SoC, but not all. Therefore move the common parts to a shared dtsi. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2013-10-14ARM: rockchip: remove obsolete rockchip,config propertiesHeiko Stuebner1-22/+0
These were used only in one intermediate variant of the pinctrl driver but forgotten in the dtsi file. rockchip,config properties are neither part of the actual binding nor handled by the pinctrl driver at all, so remove them. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2013-06-21arm: add basic support for Rockchip RK3066a boardsHeiko Stuebner1-0/+390
This adds a generic devicetree board file and a dtsi for boards based on the RK3066a SoCs from Rockchip. Apart from the generic parts (gic, clocks, pinctrl) the only components currently supported are the timers, uarts and mmc ports (all DesignWare- based). Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Olof Johansson <olof@lixom.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-23 01:52:13 +0300