summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/r8a77470.dtsi
AgeCommit message (Collapse)AuthorFilesLines
2020-02-24ARM: dts: rzg1: Add reset control properties for displayGeert Uytterhoeven1-2/+3
Add reset control properties to the devices node for the Display Units on all supported RZ/G1 SoCs. Note that on these SoCs, there is only a single reset for all DU channels. Join the clocks lines while at it, to increase uniformity. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20200218133019.22299-3-geert+renesas@glider.be
2019-12-31ARM: dts: rcar-gen2: Add missing mmio-sram bus propertiesGeert Uytterhoeven1-0/+6
"#address-cells", "#size-cells", and "ranges" are required properties for devices nodes compatible with "mmio-sram", leading to warnings when running "make dtbs_check": $ make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/sram/sram.yaml arch/arm/boot/dts/r8a7791-koelsch.dt.yaml: sram@e63a0000: '#address-cells' is a required property arch/arm/boot/dts/r8a7791-koelsch.dt.yaml: sram@e63a0000: '#size-cells' is a required property arch/arm/boot/dts/r8a7791-koelsch.dt.yaml: sram@e63a0000: 'ranges' is a required property ... Fix this by adding the missing properties to the mmio-sram device nodes in the DTS files for all affected R-Car Gen2 and RZ/G1 SoCs. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20191213162604.1890-1-geert+renesas@glider.be
2019-12-20ARM: dts: renesas: Group tuples in interrupt propertiesGeert Uytterhoeven1-40/+40
To improve human readability and enable automatic validation, the tuples in the various properties containing interrupt specifiers should be grouped. While "make dtbs_check" does not impose this yet for the "interrupts" property, it does for the "interrupt-map" property, leading to warnings like: pci@ee090000: interrupt-map:0: [0, 0, 0, 1, 5, 0, 108, 4, 2048, 0, 0, 1, 5, 0, 108, 4, 4096, 0, 0, 2, 5, 0, 108, 4] is too long pci@ee0d0000: interrupt-map:0: [0, 0, 0, 1, 5, 0, 113, 4, 2048, 0, 0, 1, 5, 0, 113, 4, 4096, 0, 0, 2, 5, 0, 113, 4] is too long Fix this by grouping the tuples of the "interrupts" and "interrupt-map" properties using angle brackets. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20191213164115.3697-4-geert+renesas@glider.be Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
2019-08-21ARM: dts: r8a77470: Add PMU device nodeGeert Uytterhoeven1-0/+7
Enable support for the ARM Performance Monitor Units in the Cortex-A7 CPU cores on RZ/G1C by adding a device node for the PMU. New Linux output: hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
2019-04-12ARM: dts: r8a77470: Add HSUSB device nodesBiju Das1-0/+35
Define the r8a77470 generic part of the HSUSB0/1 device nodes. Currently the renesas_usbhs driver doesn't handle multiple phys and we don't have a proper hardware to validate such driver changes. So for hsusb1 it is assumed that usbphy0 will be enabled by either channel0 host or device. In future, if any boards support hsusb1, we will need to add multiple phy support in the renesas_usbhs driver and override the board dts to enable the same. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-04-12ARM: dts: r8a77470: Add USB2.0 Host (EHCI/OHCI) deviceBiju Das1-0/+50
Define the r8a77470 generic part of the USB2.0 Host Controller device nodes (ehci[01]/ohci[01]). Signed-off-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-04-12ARM: dts: r8a77470: Add USB PHY DT supportBiju Das1-0/+56
Define the r8a77470 generic part of the USB PHY device node. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-04-12ARM: dts: r8a77470: Add VIN supportCao Van Dong1-0/+22
Add vin{0|1} nodes to dtsi for VIN support on the RZ/G1C (r8a77470) SoC. Signed-off-by: Cao Van Dong <cv-dong@jinso.co.jp> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-04-12ARM: dts: r8a77470: Add PWM supportCao Van Dong1-0/+70
Add pwm{0|1|2|3|4|5|6} nodes to dtsi for PWM support on the RZ/G1C (r8a77470) SoC. Signed-off-by: Cao Van Dong <cv-dong@jinso.co.jp> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-04-12ARM: dts: r8a77470: Add HSCIF supportCao Van Dong1-0/+48
Add hscif{0|1|2} nodes to dtsi for HSCIF support on the RZ/G1C (r8a77470) SoC. Signed-off-by: Cao Van Dong <cv-dong@jinso.co.jp> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-03-25ARM: dts: r8a77470: Add DU supportFabrizio Castro1-0/+32
This commit adds DU support to the RZ/G1C (a.k.a. r8a77470) specific device tree. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-11-28ARM: dts: r8a77470: Add QSPI supportFabrizio Castro1-0/+32
Add QSPI[01] support to the RZ/G1C SoC specific device tree. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-11-28ARM: dts: r8a77470: Add CMT SoC specific supportBiju Das1-0/+32
Add CMT[01] support to r8a77470 SoC DT. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-11-28ARM: dts: r8a77470: Add USB-DMAC device nodesBiju Das1-0/+56
This patch adds USB DMAC nodes. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-11-28ARM: dts: r8a77470: Add watchdog support to SoC dtsiBiju Das1-0/+10
This patch adds watchdog support to the r8a77470 SoC dtsi. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> [simon: moved node to preserve sort order] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-11-28ARM: dts: r8a77470: Add SDHI1 supportFabrizio Castro1-0/+11
Althought interface SDHI1 found on the RZ/G1C SoC (a.k.a. r8a77470) is compatible with the R-Car Gen3 ones, its OF compatibility is restricted to the SoC specific compatible string to avoid confusion, as from a more generic perspective the RZ/G1C is sharing the most similarities with the R-Car Gen2 family of SoCs, and there is a combination of R-Car Gen2 compatible SDHI IPs and R-Car Gen3 compatible SDHI IP on this specific chip. This patch adds the SoC specific part of SDHI1 support, and since SDHI1 comes with internal DMA, its DT node looks fairly different from SDHI0 and SDHI2. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-11-28ARM: dts: r8a77470: Add SDHI0 supportFabrizio Castro1-1/+16
RZ/G1C comes with two different types of IP for the SDHI interfaces, SDHI0 and SDHI2 share the same IP type, and such an IP is also compatible with the one found in R-Car Gen2. SDHI1 IP on the other hand is compatible with R-Car Gen3 with internal DMA. This patch completes the SDHI support of the R-Car Gen2 compatible IPs, including fixing the max-frequency definition of SDHI2, as it turns out there is a bug in Section 1.3.9 of the RZ/G1C Hardware User's Manual (Rev. 1.00 Oct. 2017). Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-11-28ARM: dts: r8a77470: Add I2C[0123] supportFabrizio Castro1-0/+64
Add device tree nodes for the I2C[0123] controllers. Also, add the aliases node. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-09-28ARM: dts: r8a77470: Add I2C4 supportFabrizio Castro1-0/+14
Add I2C4 support to RZ/G1C (a.k.a. r8a77470) SoC specific device tree. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Biju Das <biju.das@bp.renesas.com> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-09-28ARM: dts: r8a77470: Add SDHI2 supportFabrizio Castro1-0/+15
Add SoC specific device tree definitions for the SDHI2 interface. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Biju Das <biju.das@bp.renesas.com> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-09-28ARM: dts: r8a77470: Add SMP supportFabrizio Castro1-0/+16
Add DT node for the Advanced Power Management Unit (APMU), add the second CPU core, and use "renesas,apmu" as "enable-method". Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-08-27ARM: dts: r8a77470: Add GPIO supportBiju Das1-0/+91
Describe GPIO blocks in the R8A77470 device tree. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-08-27ARM: dts: r8a77470: Add PFC supportBiju Das1-0/+5
Define the generic R8A77470 part of the PFC device node. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-08-27ARM: dts: r8a77470: Use r8a77470-sysc binding definitionsBiju Das1-13/+14
Replace the hardcoded power domain indices by R8A77470_PD_* symbols. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Chris Paterson <chris.paterson2@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-07-23ARM: dts: r8a77470: Use r8a77470-cpg-mssr binding definitionsGeert Uytterhoeven1-8/+8
Replace the hardcoded clock indices by R8A77470_CLK_* symbols. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-04-30ARM: dts: r8a77470: Add EtherAVB supportBiju Das1-0/+13
Define the generic R8A77470 part of the EtherAVB device node. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Chris Paterson <chris.paterson2@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-04-25ARM: dts: r8a77470: Add SCIF DMA supportBiju Das1-0/+18
Add SCIF DMA support for R8A77470 SoC. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-04-25ARM: dts: r8a77470: Add SCIF supportBiju Das1-2/+67
Describe SCIF ports in the R8A77470 device tree. Also it fixes the CPG clock index ZS from 6 to 5. Fixes: 6929dfc5918049 ("ARM: dts: r8a77470: Initial SoC device tree") Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-04-25ARM: dts: r8a77470: Add IRQC supportBiju Das1-0/+20
Describe the IRQC interrupt controller in the R8A77470 device tree. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-04-25ARM: dts: r8a77470: Add SYS-DMAC supportBiju Das1-0/+66
Describe SYS-DMAC0/1 in the R8A77470 device tree. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-04-16ARM: dts: r8a77470: Initial SoC device treeBiju Das1-0/+154
The initial R8A77470 SoC device tree including CPU0, GIC, timer, SYSC, RST, CPG, and the required clock descriptions. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-04 16:38:50 +0300