summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
AgeCommit message (Collapse)AuthorFilesLines
2016-08-26ARM: dts: kirkwood: Fix Openblock A6 external GPIO pinsJason Cooper1-1/+8
By assigning the pin hog to the pinctrl node, we correctly configure the MPPs. However, they are not available to userspace. Fix this by assigning the hogs to the gpio node. After this, the following works as expected: # echo 28 >/sys/class/gpio/export # echo low >/sys/class/gpio/gpio28/direction [gregory.clement@free-electrons.com: fix title] Signed-off-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-04-14ARM: dts: kirkwood: Remove button address and fixup namesAndrew Lunn1-1/+1
The DT compiler is now warning about unit names with addresses but not reg property. Fix all the gpio-key buttons which causes warnings. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2014-05-20Merge tag 'mvebu-dt-3.16' of git://git.infradead.org/linux-mvebu into next/dtOlof Johansson1-11/+4
Merge "ARM: mvebu: DT changes for v3.16" from Jason Cooper: mvebu DT changes for v3.16 - kirkwood - rework nsa3x0 board to add nsa320 - large cleanup to facilitate use in barebox - guruplug phy updates - audio updates for t5325 - mvebu - use clocks vice clock-frequency for uart nodes - armada 375/380/385 - add watchdog node - add coherency fabric - add smp support - add sdhci - add ahci - add thermal sensor - armada 370/XP - and pmsu * tag 'mvebu-dt-3.16' of git://git.infradead.org/linux-mvebu: (35 commits) ARM: Kirkwood: t5325: Use simple card to instantiate audio ARM: Kirkwood: DT: Add missing #sound-dai-cells property ARM: Kirkwood: Add node for audio codec ARM: dts: kirkwood: set Guruplug phy-connection-type to rgmii-id ARM: dts: kirkwood: set Guruplug ethernet PHY compatible ARM: dts: kirkwood: set default pinctrl for I2C1 on 6282 ARM: dts: kirkwood: set default pinctrl for I2C0 ARM: dts: kirkwood: set default pinctrl for NAND ARM: dts: kirkwood: set default pinctrl for SPI0 ARM: dts: kirkwood: set default pinctrl for UART0/1 ARM: dts: kirkwood: set default pinctrl for GBE1 ARM: dts: kirkwood: consolidate common pinctrl settings ARM: dts: kirkwood: add pinctrl node to common SoC include ARM: dts: kirkwood: rename pin-controller nodes ARM: dts: kirkwood: remove clock-frequency properties from UART nodes ARM: dts: kirkwood: add stdout-path property to all boards ARM: dts: kirkwood: add node labels ARM: mvebu: Enable the thermal sensor in Armada 380/385 SoC ARM: mvebu: Enable the thermal sensor in Armada 375 SoC ARM: mvebu: don't use clocks property in UART node for Netgear RN2120 ... Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-05ARM: dts: kirkwood: set default pinctrl for I2C1 on 6282Sebastian Hesselbarth1-2/+0
Currently, the only 6282-based Kirkwood boards that use I2C1 are Openblocks A6/A7. Both use the same default I2C1 pinctrl setting from kirkwood-6282.dtsi. Move the pinctrl setting to the I2C1 node directly and put a note in front of the corresponding pinctrl node to overwrite the setting on board level. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Link: https://lkml.kernel.org/r/1398862602-29595-14-git-send-email-sebastian.hesselbarth@gmail.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-05-05ARM: dts: kirkwood: set default pinctrl for NANDSebastian Hesselbarth1-2/+0
There is only one valid pinctrl setting for NAND on Kirkwood. Now that we have the setting in the common SoC pinctrl, move it to the NAND controller node directly and remove it from the individual boards. While at it, also fix up status = "okay" to "ok" on one board's NAND node. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Link: https://lkml.kernel.org/r/1398862602-29595-12-git-send-email-sebastian.hesselbarth@gmail.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-05-05ARM: dts: kirkwood: set default pinctrl for UART0/1Sebastian Hesselbarth1-6/+2
Most boards use the default UART0/1 pinctrl setting without RTS/CTS. Add the pinctrl setting to the toplevel SoC UART nodes and put a note in front of the corresponding pinctrl node to overwrite the setting on board level. Currently, both boards using a different UART pinctrl setting (Openblocks A6, A7) already overwrite the pinctrl node. While at it, also fix up some status = "ok" to "okay" and again whitespace issues on mplcec4 uart nodes. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Link: https://lkml.kernel.org/r/1398862602-29595-10-git-send-email-sebastian.hesselbarth@gmail.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-05-05ARM: dts: kirkwood: rename pin-controller nodesSebastian Hesselbarth1-1/+1
To prepare pin-controller consolidation, first rename all pinctrl nodes to a more appropriate name regarding ePAPR recommended names. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Link: https://lkml.kernel.org/r/1398862602-29595-6-git-send-email-sebastian.hesselbarth@gmail.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-05-05ARM: dts: kirkwood: add stdout-path property to all boardsSebastian Hesselbarth1-0/+1
ePAPR allows to reference the device used for console output by stdout-path property. With node labels for Kirkwood UART0, now reference it on all Kirkwood boards that already have ttyS0 in their bootargs property. While at it, fix some whitespace issues on mplcec4's chosen node (there are more, but we only fix the chosen node now) Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Link: https://lkml.kernel.org/r/1398862602-29595-4-git-send-email-sebastian.hesselbarth@gmail.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-04-07ARM: Kirkwood: DT: Add missing vendor prefixAndrew Lunn1-1/+1
Add vendor prefixes to compatible strings where they are missing. Both the I2C and MTD framework ignore the prefix, so adding them has no effect on backwards compatibility. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Link: https://lkml.kernel.org/r/1395492360-1865-6-git-send-email-andrew@lunn.ch Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-01-25Merge tag 'devicetree-for-3.14' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: - Add new documents with guidelines for DT binding stability and review process. This is one of the outcomes of Kernel Summit DT discussions - Remove a bunch of device_type usage which is only for OF and deprecated with FDT - Fix a long standing issue with compatible string match ordering - Various minor binding documentation updates * tag 'devicetree-for-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: add rockchip vendor prefix serial: vt8500: Add missing binding document for arch-vt8500 serial driver. dt/bindings: submitting patches and ABI documents DT: Add vendor prefix for Emerging Display Technologies of: add vendor prefixe for EPFL of: add vendor prefix for Gumstix of: add vendor prefix for Ka-Ro electronics GmbH devicetree: macb: Document clock properties dts: bindings: trivial clock bindings doc fixes of: Fix __of_device_is_available check dt/bindings: Remove device_type "serial" from marvell,mv64360-mpsc dt/bindings: remove device_type "network" references dt/bindings: remove users of device_type "mdio" dt/bindings: Remove references to linux,phandle properties dt/bindings: Remove all references to device_type "ethernet-phy" of: irq: Ignore disabled intc's when searching map of: irq: Ignore disabled interrupt controllers OF: base: match each node compatible against all given matches first dt-bindings: add GIC-400 binding
2014-01-16dt/bindings: Remove all references to device_type "ethernet-phy"Grant Likely1-1/+0
The device_type property is deprecated for the flattened device tree and the value "ethernet-phy" has never been defined as having a useful meaning. Neither the kernel nor u-boot depend on it. It should never have appeared in PHY bindings. This patch removes all references to "ethernet-phy" as a device_type value from the documentation and the .dts files. This patch was generated mechanically with the following command and then verified by looking at the diff. sed -i '/"ethernet-phy"/d' `git grep -l '"ethernet-phy"'` Signed-off-by: Grant Likely <grant.likely@linaro.org> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-12-08ARM: DT: Kirkwood: Use symbolic names from gpio.hAndrew Lunn1-4/+4
Use GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW instead of 0 and 1. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-12-08ARM: DT: Kirkwood: Use symbolic names from input.hAndrew Lunn1-1/+1
Replace the numeric key value with a symbolic name from <bt-bindings/input/input.h> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-10-01ARM: kirkwood: Move the nand node under the mbus nodeJason Gunthorpe1-37/+37
There should be no nodes that are not children of the mbus. Move the nand node under the mbus, and rework the board .dts files to use an & reference to the nand node. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Acked-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-09-07Merge tag 'boards-for-linus' of ↵Linus Torvalds1-0/+16
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC board updates from Olof Johansson: "Board updates for 3.12. Again, a bit of domain overlap with SoC and DT branches, but most of this is around legacy code and board support. We've found that platform maintainers have a hard time separating all of these out and might move towards fewer branches for next release. - Removal of a number of Marvell Kirkwood board files, since contents is now common and mostly configured via DT. - Device-tree updates for Marvell Dove, including irqchip and clocksource setup. - Defconfig updates. Gotta go somewhere. One new one for Renesas Lager. - New backlight drivers for backlights used on Renesas shmobile platforms. - Removal of Renesas leds driver. - Shuffling of some of the new Broadcom platforms to give room for others in the same mach directory. More in 3.13" * tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (67 commits) mmc: sdhci-bcm-kona: Staticize sdhci_bcm_kona_card_event mmc: sdhci-bcm-kona: Remove unneeded version.h inclusion ARM: bcm: Make secure API call optional ARM: DT: binding fixup to align with vendor-prefixes.txt (drivers) ARM: mmc: fix NONREMOVABLE test in sdhci-bcm-kona ARM: bcm: Rename board_bcm mmc: sdhci-bcm-kona: make linker-section warning go away ARM: tegra: defconfig updates ARM: dove: add initial DT file for Globalscale D2Plug ARM: dove: add GPIO IR receiver node to SolidRun CuBox ARM: dove: add common pinmux functions to DT ARM: dove: add cpu device tree node ARM: dove: update dove_defconfig with SI5351, PCI, and xHCI arch/arm/mach-kirkwood: Avoid using ARRAY_AND_SIZE(e) as a function argument ARM: kirkwood: fix DT building and update defconfig ARM: kirkwood: Remove all remaining trace of DNS-320/325 platform code ARM: configs: disable DEBUG_LL in bcm_defconfig ARM: bcm281xx: Board specific reboot code ARM bcm281xx: Turn on socket & network support. ARM: bcm281xx: Turn on L2 cache. ...
2013-08-06ARM: kirkwood: Use the preprocessor on device tree filesEzequiel Garcia1-2/+2
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-07-26ARM: kirkwood: add gigabit ethernet and mvmdio device tree nodesSebastian Hesselbarth1-0/+16
This patch adds mv643xx_eth and mvmdio device tree nodes for DT enabled Kirkwood boards. Phy nodes are also added with reg property set on a per-board basis. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-05-27arm: kirkwood: openblocks-a6: add support for Init buttonThomas Petazzoni1-0/+14
The Kirkwood-based PlatHome OpenBlocks A6 board has an Init button connected to MPP pin 38. This commit adds support for this button. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Atsushi Yamagata <yamagata@plathome.co.jp> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-05-27arm: kirkwood: openblocks-a6: group pinmux configurationsThomas Petazzoni1-73/+9
Instead of having one separate pinmux configuration for each LED, for each GPIO of the GPIO header, for each DIP switch, this patch groups them together in configurations that make sense together: LEDs on one side, GPIOs of the GPIO header on another side, and DIP switches on yet another side. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Atsushi Yamagata <yamagata@plathome.co.jp> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-05-27arm: kirkwood: openblocks_a6: move pinmux configs to the right devicesThomas Petazzoni1-10/+16
When the pinmux mechanism was added in Kirkwood, the device driver core was not yet providing the possibility of attaching pinmux configurations to all devices, drivers had to do it explicitly, and not all drivers were doing this. Now that the driver core does that in a generic way, it makes sense to attach the pinmux configuration to their corresponding devices. This allows the pinctrl subsystem to show in debugfs to which device is related which pins, for example: pin 41 (PIN41): gpio-leds.1 mvebu-gpio:41 function gpio group mpp41 pin 42 (PIN42): gpio-leds.1 mvebu-gpio:42 function gpio group mpp42 pin 43 (PIN43): gpio-leds.1 mvebu-gpio:43 function gpio group mpp43 Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Atsushi Yamagata <yamagata@plathome.co.jp> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-03-09ARM: kirkwood: of_serial: fix clock gating by removing clock-frequencyJason Cooper1-2/+0
When DT support for kirkwood was first introduced, there was no clock infrastructure. As a result, we had to manually pass the clock-frequency to the driver from the device node. Unfortunately, on kirkwood, with minimal config or all module configs, clock-frequency breaks booting because of_serial doesn't consume the gate_clk when clock-frequency is defined. The end result on kirkwood is that runit gets gated, and then the boot fails when the kernel tries to write to the serial port. Fix the issue by removing the clock-frequency parameter from all kirkwood dts files. Booted on dreamplug without earlyprintk and successfully logged in via ttyS0. Reported-by: Simon Baatz <gmbnomis@gmail.com> Tested-by: Simon Baatz <gmbnomis@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28ARM: Kirkwood: Convert openblocks A6 board to pinctrlNobuhiro Iwamatsu1-0/+116
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-11-24ARM: Kirkwood: Add support LED of OpenBlocks A6Nobuhiro Iwamatsu1-0/+19
OpenBlocks A6 has three leds via GPIO. This supports them. And this fix typo about led, because hardware manual has typo. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-11-24ARM: kirkwood: Add NAND partiton map for OpenBlocks A6Nobuhiro Iwamatsu1-0/+30
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-11-24ARM: kirkwood: Add support second I2C bus and RTC on OpenBlocks A6Nobuhiro Iwamatsu1-0/+10
OpenBlocks A6 uses second I2C with RTC of s35390a. This supports them. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-11-22ARM: kirkwood: Add Plat'Home OpenBlocks A6 supportNobuhiro Iwamatsu1-0/+39
Add support for Plat'Home OpenBlocks A6 using the device tree where possible. This commit supports SATA, USB, ether and serial console. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-30 09:06:14 +0300