summaryrefslogtreecommitdiff
path: root/arch/arc/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2018-07-20Merge tag 'arc-4.18-rc6' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fixes from Vineet Gupta: "ARC is back after radio silence in 4.17: - Fix CONFIG_SWAP [Alexey] - Robustify cmpxchg emulation for systems w/o atomics [Alexey / PeterZ] - Allow mprotext(PROT_EXEC) for stack mappings [Vineet] - HSDK platform enable PCIe, APG GPIO [Gustavo] - miscll other fixes, config updates etc" * tag 'arc-4.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARCv2: [plat-hsdk]: Save accl reg pair by default ARC: mm: allow mprotect to make stack mappings executable ARC: Fix CONFIG_SWAP ARC: [arcompact] entry.S: minor code movement ARC: configs: Remove CONFIG_INITRAMFS_SOURCE from defconfigs ARC: configs: remove no longer needed CONFIG_DEVPTS_MULTIPLE_INSTANCES ARC: Improve cmpxchg syscall implementation ARC: [plat-hsdk]: Configure APB GPIO controller on ARC HSDK platform ARC: [plat-hsdk] Add PCIe support ARC: Enable machine_desc->init_per_cpu for !CONFIG_SMP ARC: Explicitly add -mmedium-calls to CFLAGS
2018-07-19ARCv2: [plat-hsdk]: Save accl reg pair by defaultVineet Gupta1-1/+1
This manifsted as strace segfaulting on HSDK because gcc was targetting the accumulator registers as GPRs, which kernek was not saving/restoring by default. Cc: stable@vger.kernel.org #4.14+ Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2018-06-08mm: introduce ARCH_HAS_PTE_SPECIALLaurent Dufour1-0/+1
Currently the PTE special supports is turned on in per architecture header files. Most of the time, it is defined in arch/*/include/asm/pgtable.h depending or not on some other per architecture static definition. This patch introduce a new configuration variable to manage this directly in the Kconfig files. It would later replace __HAVE_ARCH_PTE_SPECIAL. Here notes for some architecture where the definition of __HAVE_ARCH_PTE_SPECIAL is not obvious: arm __HAVE_ARCH_PTE_SPECIAL which is currently defined in arch/arm/include/asm/pgtable-3level.h which is included by arch/arm/include/asm/pgtable.h when CONFIG_ARM_LPAE is set. So select ARCH_HAS_PTE_SPECIAL if ARM_LPAE. powerpc __HAVE_ARCH_PTE_SPECIAL is defined in 2 files: - arch/powerpc/include/asm/book3s/64/pgtable.h - arch/powerpc/include/asm/pte-common.h The first one is included if (PPC_BOOK3S & PPC64) while the second is included in all the other cases. So select ARCH_HAS_PTE_SPECIAL all the time. sparc: __HAVE_ARCH_PTE_SPECIAL is defined if defined(__sparc__) && defined(__arch64__) which are defined through the compiler in sparc/Makefile if !SPARC32 which I assume to be if SPARC64. So select ARCH_HAS_PTE_SPECIAL if SPARC64 There is no functional change introduced by this patch. Link: http://lkml.kernel.org/r/1523433816-14460-2-git-send-email-ldufour@linux.vnet.ibm.com Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com> Suggested-by: Jerome Glisse <jglisse@redhat.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: David S. Miller <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Albert Ou <albert@sifive.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Christophe LEROY <christophe.leroy@c-s.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-05-19arc: use generic dma_noncoherent_opsChristoph Hellwig1-0/+4
Switch to the generic noncoherent direct mapping implementation. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Alexey Brodkin <abrodkin@synopsys.com> Acked-by: Vineet Gupta <vgupta@synopsys.com>
2018-05-09arch: define the ARCH_DMA_ADDR_T_64BIT config symbol in lib/KconfigChristoph Hellwig1-3/+0
Define this symbol if the architecture either uses 64-bit pointers or the PHYS_ADDR_T_64BIT is set. This covers 95% of the old arch magic. We only need an additional select for Xen on ARM (why anyway?), and we now always set ARCH_DMA_ADDR_T_64BIT on mips boards with 64-bit physical addressing instead of only doing it when highmem is set. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: James Hogan <jhogan@kernel.org>
2018-05-09arch: remove the ARCH_PHYS_ADDR_T_64BIT config symbolChristoph Hellwig1-3/+1
Instead select the PHYS_ADDR_T_64BIT for 32-bit architectures that need a 64-bit phys_addr_t type directly. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: James Hogan <jhogan@kernel.org>
2018-03-02Merge tag 'arc-4.15-rc4' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fixes from Vineet Gupta: - MCIP aka ARconnect fixes for SMP builds [Euginey] - preventive fix for SLC (L2 cache) flushing [Euginey] - Kconfig default fix [Ulf Magnusson] - trailing semicolon fixes [Luis de Bethencourt] - other assorted minor fixes * tag 'arc-4.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: setup cpu possible mask according to possible-cpus dts property ARC: mcip: update MCIP debug mask when the new cpu came online ARC: mcip: halt GFRC counter when ARC cores halt ARCv2: boot log: fix HS48 release number arc: dts: use 'atmel' as manufacturer for at24 in axs10x_mb ARC: Fix malformed ARC_EMUL_UNALIGNED default ARC: boot log: Fix trailing semicolon ARC: dw2 unwind: Fix trailing semicolon ARC: Enable fatal signals on boot for dev platforms ARCv2: Don't pretend we may set L-bit in STATUS32 with kflag instruction ARCv2: cache: fix slc_entire_op: flush only instead of flush-n-inv
2018-02-05ARC: Fix malformed ARC_EMUL_UNALIGNED defaultUlf Magnusson1-1/+0
'default N' should be 'default n', though they happen to have the same effect here, due to undefined symbols (N in this case) evaluating to n in a tristate sense. Remove the default from ARC_EMUL_UNALIGNED instead of changing it. bool and tristate symbols implicitly default to n. Discovered with the https://urldefense.proofpoint.com/v2/url?u=https-3A__github.com_ulfalizer_Kconfiglib_blob_master_examples_list-5Fundefined.py&d=DwIBAg&c=DPL6_X_6JkXFx7AXWqB0tg&r=c14YS-cH-kdhTOW89KozFhBtBJgs1zXscZojEZQ0THs&m=WxxD8ozR7QQUVzNCBksiznaisBGO_crN7PBOvAoju8s&s=1LmxsNqxwT-7wcInVpZ6Z1J27duZKSoyKxHIJclXU_M&e= script. Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2018-01-09arc: remove CONFIG_ARC_PLAT_NEEDS_PHYS_TO_DMAChristoph Hellwig1-3/+0
We always use the stub definitions, so remove the unused other code. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Vineet Gupta <vgupta@synopsys.com>
2017-11-25Merge tag 'arc-4.15-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC updates from Vineet Gupta: - more changes for HS48 cores: supporting MMUv5, detecting new micro-arch gizmos - axs10x platform wiring up reset driver merged in this cycle - ARC perf driver optimizations * tag 'arc-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: perf: avoid vmalloc backed mmap ARCv2: perf: optimize given that num counters <= 32 ARCv2: perf: tweak overflow interrupt ARC: [plat-axs10x] DTS: Add reset controller node to manage ethernet reset ARCv2: boot log: updates for HS48: dual-issue, ECC, Loop Buffer ARCv2: Accomodate HS48 MMUv5 by relaxing MMU ver checking ARC: [plat-axs10x] auto-select AXS101 or AXS103 given the ISA config
2017-11-22ARC: perf: avoid vmalloc backed mmapVineet Gupta1-1/+1
For non-alising Dcache, vmalloc is not needed. vmalloc triggers additonal D-TLB Misses in the perf interrupt code path making it slightly inefficient as evident from hackbench runs below. | [ARCLinux]# perf stat -e dTLB-load-misses --repeat 5 hackbench | Running with 10*40 (== 400) tasks. | Time: 35.060 | ... | Performance counter stats for 'hackbench' (5 runs): Before: 399235 dTLB-load-misses ( +- 2.08% ) After : 397676 dTLB-load-misses ( +- 2.27% ) Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-10-12treewide: Fix typos in KconfigMasanari Iida1-3/+3
This patch fixes some spelling typos found in Kconfig files. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-10-04ARC: fix allnoconfig build warningVineet Gupta1-1/+1
Reported-by: Dmitrii Kolesnichenko <dmitrii@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-09-01ARC: [plat-hsdk] initial port for HSDK boardAlexey Brodkin1-0/+1
This initial port adds support of ARC HS Development Kit board with some basic features such serial port, USB, SD/MMC and Ethernet. Essentially we run Linux kernel on all 4 cores (i.e. utilize SMP) and heavily use IO Coherency for speeding-up DMA-aware peripherals. Note as opposed to other ARC boards we link Linux kernel to 0x9000_0000 intentionally because cores 1 and 3 configured with DCCM situated at our more usual link base 0x8000_0000. We still can use memory region starting at 0x8000_0000 as we reallocate DCCM in our platform code. Note that PAE remapping for DMA clients does not work due to an RTL bug, so CREG_PAE register must be programmed to all zeroes, otherwise it will cause problems with DMA to/from peripherals even if PAE40 is not used. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-09-01ARC: mm: Decouple RAM base address from kernel link addressEugeniy Paltsev1-1/+9
[Needed for HSDK] Currently the first page of system (hence RAM base) is assumed to be @ CONFIG_LINUX_LINK_BASE, where kernel itself is linked. However is case of HSDK platform, for reasons explained in that patch, this is not true. kernel needs to be linked @ 0x9000_0000 while DDR is still wired at 0x8000_0000. To properly account for this 256M of RAM, we need to introduce a new option and base page frame accountiing off of it. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> [vgupta: renamed CONFIG_KERNEL_RAM_BASE_ADDRESS => CONFIG_LINUX_RAM_BASE : simplified changelog]
2017-08-04ARC: [plat-sim] Include this platform unconditionallyVineet Gupta1-1/+0
Essentially remove CONFIG_ARC_PLAT_SIM There is no need for any platform specific code, just the board DTS match strings which we can include unconditionally Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-05-05Revert "ARCv2: Allow enabling PAE40 w/o HIGHMEM"Alexey Brodkin1-0/+1
This reverts commit 7cab91b87dd8eeee5911ec34be8bb0288ebba18b. Now when we have a real hardware platform with PAE40 enabled (here I mean axs103 with firmware v1.2) and 1 Gb of DDR mapped to 0x1_a000_0000-0x1_ffff_ffff we're really targeting memory above 4Gb when PAE40 is enabled. This in its turn requires HIGHMEM to be enabled otherwise user won't see any difference with enabling PAE in kernel configuration as only lowmem will be used anyways. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-04-21ARCv2: entry: save Accumulator register pair (r58:59) if presentVineet Gupta1-0/+8
Accumulator is present in configs with FPU and/or DSP MPY (mpy > 6) Instead of doing this in pt_regs (and thus every kernel entry/exit), this could have been done in context switch (and for user task only) as currently kernel doesn't clobber these registers for its own accord. However we will soon start using 64-bit multiply instructions for kernel which can clobber these. Also gcc folks also plan to start using these as GPRs, hence better to always save/restore them Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-02-06ARC: [plat-*] ARC_HAS_COH_CACHES no longer relevantVineet Gupta1-6/+0
A typical SMP system expects cache coherency. Initial NPS platform support was slated to be SMP w/o cache coherency. However it seems the platform now selects that option, so there is no point in keeping it around. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-02-06ARCv2: intc: Rework the build time irq count informationYuriy Kolerov1-11/+0
Currently Kconfig knob ARC_NUMBER_OF_INTERRUPTS is used as indicator of hard irq count. But it is flawed that it doesn't affect - NR_IRQS : for number of virtual interrupts - NR_CPU_IRQS : for number of hardware interrupts Moreover the actual hardware irq count might still not be same as ARC_NUMBER_OF_INTERRUPTS. So use the information availble in the Build Configuration Registers and get rid of the Kconfig option. We still need "some" build time info about irq count to set up sufficient number of vector table entries. This is done with a sufficiently large NR_CPU_IRQS which will eventually be used soley for that purpose (subsequent patches will remove its usage elsewhere) So to summarize what this patch does: * NR_CPU_IRQS defines a maximum number of hardware interrupts. * Remove ARC_NUMBER_OF_INTERRUPTS option and create interrupts table for all possible hardware interrupts. * Increase a maximum number of virtual IRQs to 512. ARCv2 can support 240 interrupts in the core interrupts controllers and 128 interrupts in IDU. Thus 512 virtual IRQs must be enough for most configurations of boards. This patch leads to NR_CPU_IRQS in 2 places, to reduce the overall churn. The next patch will remove the 2nd definition anyways. Signed-off-by: Yuriy Kolerov <yuriy.kolerov@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> [vgupta: reworked the changelog a bit]
2017-01-18ARC: module: Fix !CONFIG_ARC_DW2_UNWIND buildsVineet Gupta1-1/+1
commit d65283f7b695b5 added mod->arch.secstr under CONFIG_ARC_DW2_UNWIND, but used it unconditionally which broke builds when the option was disabled. Fix that by adjusting the #ifdef guard. And while at it add a missing guard (for unwinder) in module.c as well Reported-by: Waldemar Brodkorb <wbx@openadk.org> Cc: stable@vger.kernel.org #4.9 Fixes: d65283f7b695b5 ("ARC: module: elide loop to save reference to .eh_frame") Tested-by: Anton Kolesov <akolesov@synopsys.com> Reviewed-by: Alexey Brodkin <abrodkin@synopsys.com> [abrodkin: provided fixlet to Kconfig per failure in allnoconfig build] Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-12-19ARC: enable SG chainingVladimir Kondratiev1-0/+1
Signed-off-by: Vladimir Kondratiev <vladimir.kondratiev@intel.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-11-30clocksource: import ARC timer driverVineet Gupta1-5/+2
This adds support for - CONFIG_ARC_TIMERS : legacy 32-bit TIMER0 and TIMER1 which count UP from @CNT to @LIMIT, before optionally triggering an interrupt. These are programmed using ARC auxiliary register interface. These are present in all ARC cores (ARC700 and ARC HS38) TIMER0 serves as clockevent for all ARC linux builds. TIMER1 is used for clocksource in arc700 builds. - CONFIG_ARC_TIMERS_64BIT: 64-bit counters, RTC and GFRC found in ARC HS38 cores. These are independnet IP blocks with different programming model respectively. Link: http://lkml.kernel.org/r/20161111231132.GA4186@mai Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-11-30ARC: timer: gfrc, rtc: build under same option (64-bit timers)Vineet Gupta1-8/+2
The original distinction was done as they were developed at different times and primarily because they are specific to UP (RTC) and SMP (GFRC). But given that driver handles that at runtime, (i.e. not allowing RTC as clocksource in SMP), we can simplify things a bit. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-10-28ARC: mm: retire ARC_DBG_TLB_MISS_COUNT...Vineet Gupta1-8/+0
... given that we have perf counters abel to do the same thing non intrusively Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-10-17ARC: [build] Support gz, lzma compressed uImageDaniel Mentz1-0/+2
Add support for lzma compressed uImage. Support for gzip was already available but could not be enabled because we were missing CONFIG_HAVE_KERNEL_GZIP in arch/arc/Kconfig. Signed-off-by: Daniel Mentz <danielmentz@google.com> Cc: linux-snps-arc@lists.infradead.org Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-10-17ARCv2: intc: untangle SMP, MCIP and IDUVineet Gupta1-8/+9
The IDU intc is technically part of MCIP (Multi-core IP) hence historically was only available in a SMP hardware build (and thus only in a SMP kernel build). Now that hardware restriction has been lifted, so a UP kernel needs to support it. This requires breaking mcip.c into parts which are strictly SMP (inter-core interrupts) and IDU which in reality is just another intc and thus has no bearing on SMP. This change allows IDU in UP builds and with a suitable device tree, we can have the cascaded intc system ARCv2 core intc <---> ARCv2 IDU intc <---> periperals Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-10-01ARC: CONFIG_NODES_SHIFT fix default valuesNoam Camus1-2/+2
Seem like values assigned as absolute number and not and shift value, i.e. should be 0 for one node (2^0) and 1 for couple of nodes (2^1) Signed-off-by: Noam Camus <noamca@mellanox.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-10-01ARCv2: Implement atomic64 based on LLOCKD/SCONDD instructionsVineet Gupta1-1/+1
ARCv2 ISA provides 64-bit exclusive load/stores so use them to implement the 64-bit atomics and elide the spinlock based generic 64-bit atomics boot tested with atomic64 self-test (and GOD bless the person who wrote them, I realized my inline assmebly is sloppy as hell) Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-snps-arc@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-06-02Revert "ARCv2: spinlock/rwlock/atomics: Delayed retry of failed SCOND with ↵Vineet Gupta1-5/+0
exponential backoff" This reverts commit e78fdfef84be13a5c2b8276e12203cdf24778596. The issue was fixed in hardware in HS2.1C release and there are no known external users of affected RTL so revert the whole delayed retry series ! Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-05-31ARC: don't enable DISCONTIGMEM unconditionallyVineet Gupta1-2/+2
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-05-30ARC: [intc-compact] simplify code for 2 priority levelsVineet Gupta1-20/+2
ARC700 support for 2 interrupt priorities historically allowed even slow perpherals such as emac and uart to setup high priority interrupts which was wrong from the beginning as they could possibly delay the more critical timer interrupt. The hardware support for 2 level interrupts in ARCompact is less than ideal anyways (judging from the "hacks" in low level entry code and thus is not used in productions systems I know of. So reduce the scope of this to timer only, thereby reducing a bunch of complexity. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-05-21lib/GCD.c: use binary GCD algorithm instead of EuclideanZhaoxiu Zeng1-0/+1
The binary GCD algorithm is based on the following facts: 1. If a and b are all evens, then gcd(a,b) = 2 * gcd(a/2, b/2) 2. If a is even and b is odd, then gcd(a,b) = gcd(a/2, b) 3. If a and b are all odds, then gcd(a,b) = gcd((a-b)/2, b) = gcd((a+b)/2, b) Even on x86 machines with reasonable division hardware, the binary algorithm runs about 25% faster (80% the execution time) than the division-based Euclidian algorithm. On platforms like Alpha and ARMv6 where division is a function call to emulation code, it's even more significant. There are two variants of the code here, depending on whether a fast __ffs (find least significant set bit) instruction is available. This allows the unpredictable branches in the bit-at-a-time shifting loop to be eliminated. If fast __ffs is not available, the "even/odd" GCD variant is used. I use the following code to benchmark: #include <stdio.h> #include <stdlib.h> #include <stdint.h> #include <string.h> #include <time.h> #include <unistd.h> #define swap(a, b) \ do { \ a ^= b; \ b ^= a; \ a ^= b; \ } while (0) unsigned long gcd0(unsigned long a, unsigned long b) { unsigned long r; if (a < b) { swap(a, b); } if (b == 0) return a; while ((r = a % b) != 0) { a = b; b = r; } return b; } unsigned long gcd1(unsigned long a, unsigned long b) { unsigned long r = a | b; if (!a || !b) return r; b >>= __builtin_ctzl(b); for (;;) { a >>= __builtin_ctzl(a); if (a == b) return a << __builtin_ctzl(r); if (a < b) swap(a, b); a -= b; } } unsigned long gcd2(unsigned long a, unsigned long b) { unsigned long r = a | b; if (!a || !b) return r; r &= -r; while (!(b & r)) b >>= 1; for (;;) { while (!(a & r)) a >>= 1; if (a == b) return a; if (a < b) swap(a, b); a -= b; a >>= 1; if (a & r) a += b; a >>= 1; } } unsigned long gcd3(unsigned long a, unsigned long b) { unsigned long r = a | b; if (!a || !b) return r; b >>= __builtin_ctzl(b); if (b == 1) return r & -r; for (;;) { a >>= __builtin_ctzl(a); if (a == 1) return r & -r; if (a == b) return a << __builtin_ctzl(r); if (a < b) swap(a, b); a -= b; } } unsigned long gcd4(unsigned long a, unsigned long b) { unsigned long r = a | b; if (!a || !b) return r; r &= -r; while (!(b & r)) b >>= 1; if (b == r) return r; for (;;) { while (!(a & r)) a >>= 1; if (a == r) return r; if (a == b) return a; if (a < b) swap(a, b); a -= b; a >>= 1; if (a & r) a += b; a >>= 1; } } static unsigned long (*gcd_func[])(unsigned long a, unsigned long b) = { gcd0, gcd1, gcd2, gcd3, gcd4, }; #define TEST_ENTRIES (sizeof(gcd_func) / sizeof(gcd_func[0])) #if defined(__x86_64__) #define rdtscll(val) do { \ unsigned long __a,__d; \ __asm__ __volatile__("rdtsc" : "=a" (__a), "=d" (__d)); \ (val) = ((unsigned long long)__a) | (((unsigned long long)__d)<<32); \ } while(0) static unsigned long long benchmark_gcd_func(unsigned long (*gcd)(unsigned long, unsigned long), unsigned long a, unsigned long b, unsigned long *res) { unsigned long long start, end; unsigned long long ret; unsigned long gcd_res; rdtscll(start); gcd_res = gcd(a, b); rdtscll(end); if (end >= start) ret = end - start; else ret = ~0ULL - start + 1 + end; *res = gcd_res; return ret; } #else static inline struct timespec read_time(void) { struct timespec time; clock_gettime(CLOCK_PROCESS_CPUTIME_ID, &time); return time; } static inline unsigned long long diff_time(struct timespec start, struct timespec end) { struct timespec temp; if ((end.tv_nsec - start.tv_nsec) < 0) { temp.tv_sec = end.tv_sec - start.tv_sec - 1; temp.tv_nsec = 1000000000ULL + end.tv_nsec - start.tv_nsec; } else { temp.tv_sec = end.tv_sec - start.tv_sec; temp.tv_nsec = end.tv_nsec - start.tv_nsec; } return temp.tv_sec * 1000000000ULL + temp.tv_nsec; } static unsigned long long benchmark_gcd_func(unsigned long (*gcd)(unsigned long, unsigned long), unsigned long a, unsigned long b, unsigned long *res) { struct timespec start, end; unsigned long gcd_res; start = read_time(); gcd_res = gcd(a, b); end = read_time(); *res = gcd_res; return diff_time(start, end); } #endif static inline unsigned long get_rand() { if (sizeof(long) == 8) return (unsigned long)rand() << 32 | rand(); else return rand(); } int main(int argc, char **argv) { unsigned int seed = time(0); int loops = 100; int repeats = 1000; unsigned long (*res)[TEST_ENTRIES]; unsigned long long elapsed[TEST_ENTRIES]; int i, j, k; for (;;) { int opt = getopt(argc, argv, "n:r:s:"); /* End condition always first */ if (opt == -1) break; switch (opt) { case 'n': loops = atoi(optarg); break; case 'r': repeats = atoi(optarg); break; case 's': seed = strtoul(optarg, NULL, 10); break; default: /* You won't actually get here. */ break; } } res = malloc(sizeof(unsigned long) * TEST_ENTRIES * loops); memset(elapsed, 0, sizeof(elapsed)); srand(seed); for (j = 0; j < loops; j++) { unsigned long a = get_rand(); /* Do we have args? */ unsigned long b = argc > optind ? strtoul(argv[optind], NULL, 10) : get_rand(); unsigned long long min_elapsed[TEST_ENTRIES]; for (k = 0; k < repeats; k++) { for (i = 0; i < TEST_ENTRIES; i++) { unsigned long long tmp = benchmark_gcd_func(gcd_func[i], a, b, &res[j][i]); if (k == 0 || min_elapsed[i] > tmp) min_elapsed[i] = tmp; } } for (i = 0; i < TEST_ENTRIES; i++) elapsed[i] += min_elapsed[i]; } for (i = 0; i < TEST_ENTRIES; i++) printf("gcd%d: elapsed %llu\n", i, elapsed[i]); k = 0; srand(seed); for (j = 0; j < loops; j++) { unsigned long a = get_rand(); unsigned long b = argc > optind ? strtoul(argv[optind], NULL, 10) : get_rand(); for (i = 1; i < TEST_ENTRIES; i++) { if (res[j][i] != res[j][0]) break; } if (i < TEST_ENTRIES) { if (k == 0) { k = 1; fprintf(stderr, "Error:\n"); } fprintf(stderr, "gcd(%lu, %lu): ", a, b); for (i = 0; i < TEST_ENTRIES; i++) fprintf(stderr, "%ld%s", res[j][i], i < TEST_ENTRIES - 1 ? ", " : "\n"); } } if (k == 0) fprintf(stderr, "PASS\n"); free(res); return 0; } Compiled with "-O2", on "VirtualBox 4.4.0-22-generic #38-Ubuntu x86_64" got: zhaoxiuzeng@zhaoxiuzeng-VirtualBox:~/develop$ ./gcd -r 500000 -n 10 gcd0: elapsed 10174 gcd1: elapsed 2120 gcd2: elapsed 2902 gcd3: elapsed 2039 gcd4: elapsed 2812 PASS zhaoxiuzeng@zhaoxiuzeng-VirtualBox:~/develop$ ./gcd -r 500000 -n 10 gcd0: elapsed 9309 gcd1: elapsed 2280 gcd2: elapsed 2822 gcd3: elapsed 2217 gcd4: elapsed 2710 PASS zhaoxiuzeng@zhaoxiuzeng-VirtualBox:~/develop$ ./gcd -r 500000 -n 10 gcd0: elapsed 9589 gcd1: elapsed 2098 gcd2: elapsed 2815 gcd3: elapsed 2030 gcd4: elapsed 2718 PASS zhaoxiuzeng@zhaoxiuzeng-VirtualBox:~/develop$ ./gcd -r 500000 -n 10 gcd0: elapsed 9914 gcd1: elapsed 2309 gcd2: elapsed 2779 gcd3: elapsed 2228 gcd4: elapsed 2709 PASS [akpm@linux-foundation.org: avoid #defining a CONFIG_ variable] Signed-off-by: Zhaoxiu Zeng <zhaoxiu.zeng@gmail.com> Signed-off-by: George Spelvin <linux@horizon.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-09ARC: Add eznps platform to Kconfig and MakefileNoam Camus1-0/+1
This commit should be left last since only now eznps platform is in state which one can actually use. Signed-off-by: Noam Camus <noamc@ezchip.com>
2016-05-09ARC: Make vmalloc size configurableNoam Camus1-0/+11
On ARC, lower 2G of address space is translated and used for - user vaddr space (region 0 to 5) - unused kernel-user gutter (region 6) - kernel vaddr space (region 7) where each region simply represents 256MB of address space. The kernel vaddr space of 256MB is used to implement vmalloc, modules So far this was enough, but not on EZChip system with 4K CPUs (given that per cpu mechanism uses vmalloc for allocating chunks) So allow VMALLOC_SIZE to be configurable by expanding down into the unused kernel-user gutter region which at default 256M was excessive anyways. Also use _BITUL() to fix a build error since PGDIR_SIZE cannot use "1UL" as called from assembly code in mm/tlbex.S Signed-off-by: Noam Camus <noamc@ezchip.com> [vgupta: rewrote changelog, debugged bootup crash due to int vs. hex] Acked-by: Vineet Gupta <vgupta@synopsys.com>
2016-05-09ARC: [intc-*] Do a domain lookup in primary handler for hwirq -> linux virqVineet Gupta1-0/+1
The primary interrupt handler arch_do_IRQ() was passing hwirq as linux virq to core code. This was fragile and worked so far as we only had legacy/linear domains. This came out of a rant by Marc Zyngier. http://lists.infradead.org/pipermail/linux-snps-arc/2015-December/000298.html Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Noam Camus <noamc@ezchip.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-05-09ARC: clockevent: Prepare for DT based probeNoam Camus1-1/+2
- call clocksource_probe() - This in turns needs of_clk_init() to be called earlier Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Noam Camus <noamc@ezchip.com> [vgupta: broken off from a bigger patch] Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-05-05ARC: support HIGHMEM even without PAE40Vineet Gupta1-0/+13
Initial HIGHMEM support on ARC was introduced for PAE40 where the low memory (0x8000_0000 based) and high memory (0x1_0000_0000) were physically contiguous. So CONFIG_FLATMEM sufficed (despite a peipheral hole in the middle, which wasted a bit of struct page memory, but things worked). However w/o PAE, highmem was not possible and we could only reach ~1.75GB of DDR. Now there is a use case to access ~4GB of DDR w/o PAE40 The idea is to have low memory at canonical 0x8000_0000 and highmem at 0 so enire 4GB address space is available for physical addressing This needs additional platform/interconnect mapping to convert the non contiguous physical addresses into linear bus adresses. From Linux point of view, non contiguous divide means FLATMEM no longer works and DISCONTIGMEM is needed to track the pfns in the 2 regions. This scheme would also work for PAE40, only better in that we don't waste struct page memory for the peripheral hole. The DT description will be something like memory { ... reg = <0x80000000 0x200000000 /* 512MB: lowmem */ 0x00000000 0x10000000>; /* 256MB: highmem */ } Signed-off-by: Noam Camus <noamc@ezchip.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-04-27ARC: add support for reserved memory defined by device treeAlexey Brodkin1-0/+1
Enable reserved memory initialization from device tree. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: linux-kernel@vger.kernel.org Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-04-27ARC: support generic per-device coherent dma memAlexey Brodkin1-0/+1
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: linux-kernel@vger.kernel.org Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-04-07ARC: Don't source drivers/pci/pcie/Kconfig ourselvesAndreas Ziegler1-1/+0
Commit 5f8fc43217a0 ("PCI: Include pci/pcie/Kconfig directly from pci/Kconfig") in linux-next changed drivers/pci/Kconfig to include drivers/pci/pcie/Kconfig itself, so that architectures do not need to source both files themselves. ARC just recently gained PCI support through commit 6b3fb77998dd ("ARC: Add PCI support"), but this change was based on the old behaviour of the Kconfig files. This makes Kconfig now spit out the following warnings: drivers/pci/pcie/Kconfig:61:warning: choice value used outside its choice group drivers/pci/pcie/Kconfig:67:warning: choice value used outside its choice group drivers/pci/pcie/Kconfig:74:warning: choice value used outside its choice group This change updates the Kconfig file for ARC, dropping the now unnecessary 'source' statement, which makes the warning disappear. Signed-off-by: Andreas Ziegler <andreas.ziegler@fau.de> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-03-21Merge tag 'arc-4.6-rc1' of ↵Linus Torvalds1-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC architecture updates from Vineet Gupta: - Big Endian io accessors fix [Lada] - Spellos fixes [Adam] - Fix for DW GMAC breakage [Alexey] - Making DMA API 64-bit ready - Shutting up -Wmaybe-uninitialized noise for ARC - Other minor fixes here and there, comments update * tag 'arc-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: (21 commits) ARCv2: ioremap: Support dynamic peripheral address space ARC: dma: reintroduce platform specific dma<->phys ARC: dma: ioremap: use phys_addr_t consistenctly in code paths ARC: dma: pass_phys() not sg_virt() to cache ops ARC: dma: non-coherent pages need V-P mapping if in HIGHMEM ARC: dma: Use struct page based page allocator helpers ARC: build: Turn off -Wmaybe-uninitialized for ARC gcc 4.8 ARC: [plat-axs10x] add Ethernet PHY description in .dts arc: use of_platform_default_populate() to populate default bus ARC: thp: unbork !CONFIG_TRANSPARENT_HUGEPAGE build arc: [plat-nsimosci*] use ezchip network driver ARCv2: LLSC: software backoff is NOT needed starting HS2.1c ARC: mm: Use virt_to_pfn() for addr >> PAGE_SHIFT pattern ARC: [plat-nsim] document ranges ARC: build: Better way to detect ISA compatible toolchain ARCv2: Allow enabling PAE40 w/o HIGHMEM ARC: [BE] readl()/writel() to work in Big Endian CPU configuration ARC: [*defconfig] No need to specify CONFIG_CROSS_COMPILE ARC: [BE] Select correct CROSS_COMPILE prefix ARC: bitops: Remove non relevant comments ...
2016-03-19ARC: dma: reintroduce platform specific dma<->physVineet Gupta1-0/+3
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-03-17Merge tag 'pci-v4.6-changes' of ↵Linus Torvalds1-0/+26
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "PCI changes for v4.6: Enumeration: - Disable IO/MEM decoding for devices with non-compliant BARs (Bjorn Helgaas) - Mark Broadwell-EP Home Agent & PCU as having non-compliant BARs (Bjorn Helgaas Resource management: - Mark shadow copy of VGA ROM as IORESOURCE_PCI_FIXED (Bjorn Helgaas) - Don't assign or reassign immutable resources (Bjorn Helgaas) - Don't enable/disable ROM BAR if we're using a RAM shadow copy (Bjorn Helgaas) - Set ROM shadow location in arch code, not in PCI core (Bjorn Helgaas) - Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs (Bjorn Helgaas) - ia64: Use ioremap() instead of open-coded equivalent (Bjorn Helgaas) - ia64: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas) - MIPS: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas) - Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY (Bjorn Helgaas) - Don't leak memory if sysfs_create_bin_file() fails (Bjorn Helgaas) - rcar: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi) - designware: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi) Virtualization: - Wait for up to 1000ms after FLR reset (Alex Williamson) - Support SR-IOV on any function type (Kelly Zytaruk) - Add ACS quirk for all Cavium devices (Manish Jaggi) AER: - Rename pci_ops_aer to aer_inj_pci_ops (Bjorn Helgaas) - Restore pci_ops pointer while calling original pci_ops (David Daney) - Fix aer_inject error codes (Jean Delvare) - Use dev_warn() in aer_inject (Jean Delvare) - Log actual error causes in aer_inject (Jean Delvare) - Log aer_inject error injections (Jean Delvare) VPD: - Prevent VPD access for buggy devices (Babu Moger) - Move pci_read_vpd() and pci_write_vpd() close to other VPD code (Bjorn Helgaas) - Move pci_vpd_release() from header file to pci/access.c (Bjorn Helgaas) - Remove struct pci_vpd_ops.release function pointer (Bjorn Helgaas) - Rename VPD symbols to remove unnecessary "pci22" (Bjorn Helgaas) - Fold struct pci_vpd_pci22 into struct pci_vpd (Bjorn Helgaas) - Sleep rather than busy-wait for VPD access completion (Bjorn Helgaas) - Update VPD definitions (Hannes Reinecke) - Allow access to VPD attributes with size 0 (Hannes Reinecke) - Determine actual VPD size on first access (Hannes Reinecke) Generic host bridge driver: - Move structure definitions to separate header file (David Daney) - Add pci_host_common_probe(), based on gen_pci_probe() (David Daney) - Expose pci_host_common_probe() for use by other drivers (David Daney) Altera host bridge driver: - Fix altera_pcie_link_is_up() (Ley Foon Tan) Cavium ThunderX host bridge driver: - Add PCIe host driver for ThunderX processors (David Daney) - Add driver for ThunderX-pass{1,2} on-chip devices (David Daney) Freescale i.MX6 host bridge driver: - Add DT bindings to configure PHY Tx driver settings (Justin Waters) - Move imx6_pcie_reset_phy() near other PHY handling functions (Lucas Stach) - Move PHY reset into imx6_pcie_establish_link() (Lucas Stach) - Remove broken Gen2 workaround (Lucas Stach) - Move link up check into imx6_pcie_wait_for_link() (Lucas Stach) Freescale Layerscape host bridge driver: - Add "fsl,ls2085a-pcie" compatible ID (Yang Shi) Intel VMD host bridge driver: - Attach VMD resources to parent domain's resource tree (Jon Derrick) - Set bus resource start to 0 (Keith Busch) Microsoft Hyper-V host bridge driver: - Add fwnode_handle to x86 pci_sysdata (Jake Oshins) - Look up IRQ domain by fwnode_handle (Jake Oshins) - Add paravirtual PCI front-end for Microsoft Hyper-V VMs (Jake Oshins) NVIDIA Tegra host bridge driver: - Add pci_ops.{add,remove}_bus() callbacks (Thierry Reding) - Implement ->{add,remove}_bus() callbacks (Thierry Reding) - Remove unused struct tegra_pcie.num_ports field (Thierry Reding) - Track bus -> CPU mapping (Thierry Reding) - Remove misleading PHYS_OFFSET (Thierry Reding) Renesas R-Car host bridge driver: - Depend on ARCH_RENESAS, not ARCH_SHMOBILE (Simon Horman) Synopsys DesignWare host bridge driver: - ARC: Add PCI support (Joao Pinto) - Add generic dw_pcie_wait_for_link() (Joao Pinto) - Add default link up check if sub-driver doesn't override (Joao Pinto) - Add driver for prototyping kits based on ARC SDP (Joao Pinto) TI Keystone host bridge driver: - Defer probing if devm_phy_get() returns -EPROBE_DEFER (Shawn Lin) Xilinx AXI host bridge driver: - Use of_pci_get_host_bridge_resources() to parse DT (Bharat Kumar Gogada) - Remove dependency on ARM-specific struct hw_pci (Bharat Kumar Gogada) - Don't call pci_fixup_irqs() on Microblaze (Bharat Kumar Gogada) - Update Zynq binding with Microblaze node (Bharat Kumar Gogada) - microblaze: Support generic Xilinx AXI PCIe Host Bridge IP driver (Bharat Kumar Gogada) Xilinx NWL host bridge driver: - Add support for Xilinx NWL PCIe Host Controller (Bharat Kumar Gogada) Miscellaneous: - Check device_attach() return value always (Bjorn Helgaas) - Move pci_set_flags() from asm-generic/pci-bridge.h to linux/pci.h (Bjorn Helgaas) - Remove includes of empty asm-generic/pci-bridge.h (Bjorn Helgaas) - ARM64: Remove generated include of asm-generic/pci-bridge.h (Bjorn Helgaas) - Remove empty asm-generic/pci-bridge.h (Bjorn Helgaas) - Remove includes of asm/pci-bridge.h (Bjorn Helgaas) - Consolidate PCI DMA constants and interfaces in linux/pci-dma-compat.h (Bjorn Helgaas) - unicore32: Remove unused HAVE_ARCH_PCI_SET_DMA_MASK definition (Bjorn Helgaas) - Cleanup pci/pcie/Kconfig whitespace (Andreas Ziegler) - Include pci/hotplug Kconfig directly from pci/Kconfig (Bjorn Helgaas) - Include pci/pcie/Kconfig directly from pci/Kconfig (Bogicevic Sasa) - frv: Remove stray pci_{alloc,free}_consistent() declaration (Christoph Hellwig) - Move pci_dma_* helpers to common code (Christoph Hellwig) - Add PCI_CLASS_SERIAL_USB_DEVICE definition (Heikki Krogerus) - Add QEMU top-level IDs for (sub)vendor & device (Robin H. Johnson) - Fix broken URL for Dell biosdevname (Naga Venkata Sai Indubhaskar Jupudi)" * tag 'pci-v4.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (94 commits) PCI: Add PCI_CLASS_SERIAL_USB_DEVICE definition PCI: designware: Add driver for prototyping kits based on ARC SDP PCI: designware: Add default link up check if sub-driver doesn't override PCI: designware: Add generic dw_pcie_wait_for_link() PCI: Cleanup pci/pcie/Kconfig whitespace PCI: Simplify pci_create_attr() control flow PCI: Don't leak memory if sysfs_create_bin_file() fails PCI: Simplify sysfs ROM cleanup PCI: Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY MIPS: Loongson 3: Keep CPU physical (not virtual) addresses in shadow ROM resource MIPS: Loongson 3: Use temporary struct resource * to avoid repetition ia64/PCI: Keep CPU physical (not virtual) addresses in shadow ROM resource ia64/PCI: Use ioremap() instead of open-coded equivalent ia64/PCI: Use temporary struct resource * to avoid repetition PCI: Clean up pci_map_rom() whitespace PCI: Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs PCI: thunder: Add driver for ThunderX-pass{1,2} on-chip devices PCI: thunder: Add PCIe host driver for ThunderX processors PCI: generic: Expose pci_host_common_probe() for use by other drivers PCI: generic: Add pci_host_common_probe(), based on gen_pci_probe() ...
2016-03-15ARCv2: LLSC: software backoff is NOT needed starting HS2.1cVineet Gupta1-1/+1
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-03-12ARCv2: Allow enabling PAE40 w/o HIGHMEMVineet Gupta1-1/+0
This allows for regression testing in PAE specific code as we lack a 32+ bit physical memory platform other than nSIM. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-03-10ARC: Add PCI supportJoao Pinto1-0/+26
Add PCI support to ARC and update drivers/pci Makefile enabling the ARC arch to use the generic PCI setup functions. [bhelgaas: fold in Joao's pci-dma-compat.h & pci-bridge.h build fix (I should have caught this myself, sorry] Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Vineet Gupta <vgupta@synopsys.com>
2016-02-24ARC: SMP: No need for CONFIG_ARC_IPI_DBGVineet Gupta1-8/+0
This was more relevant during SMP bringup. The warning for bogus msg better be visible always. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-02-23arc: get rid of DEVTMPFS dependency on INITRAMFS_SOURCEAlexey Brodkin1-2/+0
Even though DEVTMPFS is required when our pre-built initramfs is used it is not the case in general. It is perfectly possible to use initramfs with device nodes already populated or there could be other usages, see discussion below for more detials: http://thread.gmane.org/gmane.comp.embedded.openwrt.devel/37819/focus=37821 This change removes mentioned dependency from arch/arc/Kconfig updating instead those defconfigs that are usually used with this kind of pre-build initramfs. And while at it all touched defconfigs were regenerated via savedefconfig and some options were removed: * USB is selected by other options implicitly * VGA_CONSOLE is disableb for ARC since 031e29b5877f31676739dc2f847d04c2c0732034 * EXT3_FS automatically selects EXT4_FS * MTDxxx and JFFS2_FS make no sense for AXS because AXS NAND controller is not upstreamed * NET_OSCI_LAN is not in upstream as well * ARCPGU_xxx options make no sense because ARC PGU is not yet in upstream and when it gets there all config options would be taken from devicetree Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-02-18ARC: Assume multiplier is always presentVineet Gupta1-8/+0
It is unlikely that designs running Linux will not have multiplier. Further the current support is not complete as tool don't generate a multilib w/o multiplier. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-07 18:26:57 +0300