summaryrefslogtreecommitdiff
path: root/MAINTAINERS
AgeCommit message (Collapse)AuthorFilesLines
2018-08-02watchdog: add driver for the MEN 16z069 IP-CoreJohannes Thumshirn1-0/+6
Add a driver for the MEN 16z069 Watchdog and Reset Controller IP-Core. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Michael Moese <mmoese@suse.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-08-02media: Rename CAMSS driver pathTodor Tomov1-1/+1
Support for camera subsystem on QComm MSM8996/APQ8096 is to be added so remove hardware version from CAMSS driver's path. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02dt-bindings: mux: add adi,adgs1408Mircea Caprioru1-0/+6
Adding documentation for adgs1408/1409 multiplexer. The bindings follow the standard SPI and mux bindings and do not require any additional custom properties. Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com> Reviewed-by: Rob Herring <robh@kernel.org> [peda: reword idle-state to non-array for singular mux controller] Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-01MAINTAINERS: Add .clang-format entryMiguel Ojeda1-0/+5
As discussed in https://lkml.org/lkml/2018/6/25/877 Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2018-08-01MAINTAINERS: drop Wenyou Yang from Atmel NAND driver supportMiquel Raynal1-1/+0
Mails to wenyou.yang@microchip.com are not deliverable. Drop him as Microchip/Atmel NAND controller driver maintainer. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Boris Brezillon <boris.brezillon@bootlin.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-07-31i2c: i2c-qcom-geni: Add bus driver for the Qualcomm GENI I2C controllerKarthikeyan Ramasubramanian1-0/+8
This bus driver supports the GENI based i2c hardware controller in the Qualcomm SOCs. The Qualcomm Generic Interface (GENI) is a programmable module supporting a wide range of serial interfaces including I2C. The driver supports FIFO mode and DMA mode of transfer and switches modes dynamically depending on the size of the transfer. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@codeaurora.org> Signed-off-by: Sagar Dharia <sdharia@codeaurora.org> Signed-off-by: Girish Mahadevan <girishm@codeaurora.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Stephen Boyd <swboyd@chromium.org> [wsa: squashed the MAINTAINER addition and a RPM fix by Evan Green] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-07-30Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Misc fixes: - AMD IBS data corruptor fix (uncovered by UBSAN) - an Intel PEBS entry unwind error fix - a HW-tracing crash fix - a MAINTAINERS update" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Fix crash when using HW tracing kernel filters perf/x86/intel: Fix unwind errors from PEBS entries (mk-II) MAINTAINERS: Add Naveen N. Rao as kprobes co-maintainer perf/x86/amd/ibs: Don't access non-started event
2018-07-30MAINTAINERS: add entries for several media driversAkihiro Tsukada1-0/+36
add entries for the following drivers: - earth_pt{1,3} DVB adapter drivers - mxl301rf DVB tuner drivers - qm1d1{b0004, c0042} DVB tuner drivers - tc90522 DVB demod driver Signed-off-by: Akihiro Tsukada <tskd08@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-30Merge tag 'usb-for-v4.19' of ↵Greg Kroah-Hartman1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: changes for v4.19 Not a big pull request with only 37 non-merge commits, most of which are touching dwc2 (74% of the changes). The most important changes are dwc2's support for uframe scheduling and its endian-agnostic readl/writel wrappers. From dwc3 side we have a special new glue layer for Synopsys HAPS which will help Synopsys running FPGA validation using our upstream driver. We also have the beginnings of dual-role support for Intel Merrifield platform. Apart from these, just a series of non-critical changes.
2018-07-30Merge 4.18-rc7 into staging-nextGreg Kroah-Hartman1-5/+5
We want the staging changes in here for testing and merge issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-30Merge 4.18-rc7 into usb-nextGreg Kroah-Hartman1-5/+5
We want the USB fixes in here as well to handle merge issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-30BackMerge v4.18-rc7 into drm-nextDave Airlie1-9/+12
rmk requested this for armada and I think we've had a few conflicts build up. Signed-off-by: Dave Airlie <airlied@redhat.com>
2018-07-29Merge tag 'at24-4.19-updates-for-wolfram' of ↵Wolfram Sang1-5/+4
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-4.19 at24: updates for v4.19 New property: 'address-width' which allows to specify the number of addressing bits. Up until now we only could choose one of the defined models and rely on the flags specified in its corresponding chip data structure.
2018-07-28Merge tag 'phy-for-4.19' of ↵Greg Kroah-Hartman1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next Kishon writes: phy: for 4.19 *) Add new PHY driver for GEN3 PCIe PHY on Renesas R-Car *) Add new PHY driver for PCIe PHY on Broadcom's Stingray SoC *) Enable battery charging in Mediatek T-PHY *) Switch to SPDX identifier in Marvell PHY drivers *) Fix compilation warning in phy-qcom-usb-hs.c Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-07-27Merge branch 'for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: - a couple of new device IDs added to Elan i2c touchpad controller driver - another entry in i8042 reset quirk list * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: i8042 - add Lenovo LaVie Z to the i8042 reset list Input: elan_i2c - add another ACPI ID for Lenovo Ideapad 330-15AST MAINTAINERS: Add file patterns for serio device tree bindings Input: elan_i2c - add ACPI ID for lenovo ideapad 330
2018-07-27media: ov2680: dt: Add bindings for OV2680Rui Miguel Silva1-0/+8
Add device tree binding documentation for the OV2680 camera sensor. [Sakari Ailus: Squash MAINTAINERS entry from Rui] CC: devicetree@vger.kernel.org Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-27media: dt-bindings: media: i2c: Document MT9V111 bindingsJacopo Mondi1-0/+8
Add documentation for Aptina MT9V111 image sensor. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-27staging: erofs: add a TODO and update MAINTAINERS for stagingGao Xiang1-0/+7
This patch adds a TODO to list the things to be done, and the relevant info to MAINTAINERS so we can take all the blame :) Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-27Merge branches 'ib-mfd-4.19', 'ib-mfd-gpio-pinctrl-4.19', ↵Lee Jones1-14/+52
'ib-mfd-i915-media-platform-4.19' and 'ib-mfd-regulator-4.19', tag 'ib-platform-chrome-mfd-move-cros-ec-transport-for-4.19' into ibs-for-mfd-merged Immutable branch (mfd, chrome) due for the v4.19 window Immutable Branch which moves the cros_ec_i2c and cros_ec_spi transport drivers from mfd to platform/chrome. Changes in arm are a simple rename in defconfigs. Change in input is a rename in help text.
2018-07-26usb: gadget: uvc: Move userspace API definition to public headerLaurent Pinchart1-0/+1
The UVC gadget userspace API (V4L2 events and custom ioctls) is defined in a header internal to the kernel. Move it to a new public header to make it accessible to userspace. The UVC_INTF_CONTROL and UVC_INTF_STREAMING macros are not used, so remove them in the process. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-07-26Merge tag 'soc-fsl-for-4.19' of ↵Olof Johansson1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into next/drivers Various updates to soc/fsl for 4.19 Moves DPAA2 DPIO driver from staging to fsl/soc Adds multiple-pin support to QE gpio driver * tag 'soc-fsl-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux: soc: fsl: cleanup Kconfig menu soc: fsl: dpio: Convert DPIO documentation to .rst staging: fsl-mc: Remove remaining files staging: fsl-mc: Move DPIO from staging to drivers/soc/fsl staging: fsl-dpaa2: eth: move generic FD defines to DPIO soc: fsl: qe: gpio: Add qe_gpio_set_multiple Signed-off-by: Olof Johansson <olof@lixom.net>
2018-07-26Merge tag 'renesas-arm-dt-for-v4.19' of ↵Olof Johansson1-0/+1
https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Renesas ARM Based SoC DT Updates for v4.19 * RZ/G1C (r8a77470) SoC: Use r8a77470-cpg-mssr binding definitions * Add GR-Peach audio camera shield support with MT9V111 image sensor * Add initial support for RZ/N1D (r9a06g032) SoC and its RZN1D-DB board * Use SPDX identifiers in DT for all SoCs and boards * Add missing OPP properties for all CPUs on various SoCs * Add missing PMIC nodes to R-Car Gen2 M2-W (r8a7791) based porter board * tag 'renesas-arm-dt-for-v4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: dts: r8a77470: Use r8a77470-cpg-mssr binding definitions ARM: dts: gr-peach: Add GR-Peach audiocamerashield support ARM: dts: Renesas R9A06G032 SMP enable method ARM: dts: Renesas RZN1D-DB Board base file ARM: dts: Renesas R9A06G032 base device tree file ARM: dts: convert to SPDX identifier for Renesas boards ARM: dts: r8a77(43|9[013]): Add missing OPP properties for CPUs ARM: dts: porter: Add missing PMIC nodes Signed-off-by: Olof Johansson <olof@lixom.net>
2018-07-25MAINTAINERS: add entry for AMD PP codeChristian König1-0/+8
Add separate entry for the power managent code on AMD GPUs. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Rex Zhu <rezhu@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-25MAINTAINERS: Add separate section for DCChristian König1-0/+8
Note that Harry and Leo Li are maintainers for that stuff. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-25MAINTAINERS: add new TTM maintainersChristian König1-1/+2
Roger unfortunately doesn't work for AMD any longer. So add Rui and Jerry as co-maintainer as well. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-25media: MAINTAINERS: Add entry for STM32 DCMI media driverHugues Fruchet1-0/+8
Add an entry to make myself a maintainer of STM32 DCMI media driver. Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-25media: vicodec: add the virtual codec driverHans Verkuil1-0/+8
Add the virtual codec driver that uses the Fast Walsh Hadamard Transform. Keiichi Watanabe contributed the multiplanar support. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Co-Developed-by: Keiichi Watanabe <keiichiw@chromium.org> Signed-off-by: Keiichi Watanabe <keiichiw@chromium.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-25Merge tag 'iio-for-4.19b' of ↵Greg Kroah-Hartman1-0/+8
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Second set of IIO new device support, features and cleanups. There are also a couple of fixes that can wait for the coming merge window. Core new features * Support for phase channels (used in time of flight sensors amongst other things) * Support for deep UV light channel modifier. New Device Support * AD4758 DAC - New driver and dt bindings. * adxl345 - Support the adxl375 +-200g part which is register compatible. * isl29501 Time of flight sensor. - New driver * meson-saradc - Support the Meson8m2 Socs - right now this is just an ID, but there will be additional difference in future. * mpu6050 - New ID for 6515 variant. * si1133 UV sensor. - New driver * Spreadtrum SC27xx PMIC ADC - New driver and dt bindings. Features * adxl345 - Add calibration offset readback and writing. - Add sampling frequency control. Fixes and Cleanups * ad5933 - Use a macro for the channel definition to reduce duplication. * ad9523 - Replace use of core mlock with a local lock. Part of ongoing efforts to avoid confusing the purpose of mlock which is only about iio core state changes. - Fix displayed phase which was out by a factor of 10. * adxl345 - Add a link to the datasheet. - Rework the use of the address field in the chan_spec structures to allow addition of more per channel information. * adis imu - Mark switch fall throughs. * at91-sama5d2 - Fix some casting on big endian systems. * bmp280 - Drop some DT elements that aren't used and should mostly be done from userspace rather than in DT. * hx711 - add clock-frequency dt binding and resulting delay to deal with capacitance issue on some boards. - fix a spurious unit-address in the example. * ina2xx - Avoid a possible kthread_stop with a stale task_struct. * ltc2632 - Remove some unused local variables (assigned but value never used). * max1363 - Use device_get_match_data to remove some boilerplate. * mma8452 - Mark switch fall throughs. * sca3000 - Fix a missing return in a switch statement (a bad fallthrough previously!) * sigma-delta-modulator - Drop incorrect unit address from the DT example. * st_accel - Use device_get_match_data to drop some boiler plate. - Move to probe_new for i2c driver as second parameter not used. * st_sensors library - Use a strlcpy (safe in this case). * st_lsm6dsx - Add some error logging. * ti-ads7950 - SPDX - Allow simultaneous buffered and polled reads. Needed on a Lego Mindstorms EV3 where some channels are used for power supply monitoring at a very low rate. * ti-dac5571 - Remove an unused variable. * xadc - Drop some dead code.
2018-07-25Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
2018-07-25staging: fsl-mc: Move DPIO from staging to drivers/soc/fslRoy Pledge1-1/+1
Move the NXP DPIO (Datapath I/O Driver) out of the drivers/staging directory and into the drivers/soc/fsl directory. The DPIO driver enables access to Queue and Buffer Manager (QBMAN) hardware on NXP DPAA2 devices. This is a prerequisite to moving the DPAA2 Ethernet driver out of staging. Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Reviewed-by: Horia Geantă <horia.geanta@nxp.com> Reviewed-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2018-07-25ARC: Add Ofer Levi as plat-eznps maintainerLeon Romanovsky1-0/+1
Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2018-07-24MAINTAINERS: Add Naveen N. Rao as kprobes co-maintainerAnanth N Mavinakayanahalli1-1/+1
Naveen has been contributing consistently reviewing and hardening kprobes for some time now. I have not been able to do the same due to other commitments. Signed-off-by: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: akpm@linux-foundation.org Cc: mhiramat@kernel.org Link: http://lkml.kernel.org/r/153180735790.1914.15547706781664285286.stgit@thinktux Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-07-24MAINTAINERS: Remove Dave Goodell from the usnic RDMA driver maintainer listBart Van Assche1-1/+0
The e-mail address dgoodell@exch.cisco.com no longer exists. Additionally, according to https://www.linkedin.com/in/goodell/ Dave is an Amazon employee since December 2017. Hence remove his Cisco e-mail address from the usnic maintainer list. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Acked-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-07-23ARM: dts: Renesas R9A06G032 base device tree fileMichel Pollet1-0/+1
This adds the Renesas R9A06G032 bare bone support. This currently only handles the SYSCTRL block note, generic parts (gic, architected timer) and a UART. Signed-off-by: Michel Pollet <michel.pollet@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> [simon: updated MAINTAINERS file [simon: do not use r9a06g032-sysctrl.h as it is not in the renesas tree yet] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-07-22Merge tag 'am654-for-v4.19-signed' of ↵Olof Johansson1-0/+9
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt TI AM654 support for v4.19 merge window This branch adds initial support for new Texas Instruments AM654 quad core A53 ARMv8 SoC. It's the first device for TI K3 multicore SoC architecture. Initially only basic devices are configured, support for more devices will follow later on. And many of the internal devices familiar from earlier TI SoCs should work with existing kernel device drivers. * tag 'am654-for-v4.19-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: arm64: dts: ti: Add support for AM654 EVM base board soc: ti: Add Support for AM654 SoC config option arm64: dts: ti: Add Support for AM654 SoC arm64: Add support for TI's K3 Multicore SoC architecture dt-bindings: arm: ti: Add bindings for AM654 SoC Signed-off-by: Olof Johansson <olof@lixom.net>
2018-07-22Merge tag 'at91-ab-4.19-soc' of ↵Olof Johansson1-5/+0
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/soc AT91 SoC for 4.19: - New low power mode for sama5d2: ULP1 * tag 'at91-ab-4.19-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: ARM: at91: pm: configure wakeup sources for ULP1 mode ARM: at91: pm: add PMC fast startup registers defines ARM: at91: pm: Add ULP1 mode support ARM: at91: pm: Use ULP0 naming instead of slow clock MAINTAINERS: Remove the AT91 clk driver entry Signed-off-by: Olof Johansson <olof@lixom.net>
2018-07-21MAINTAINERS: Peter has movedPeter Senna Tschudin1-1/+1
Update my E-mail address in the MAINTAINERS file. Link: http://lkml.kernel.org/r/20180710144702.1308-1-peter.senna@gmail.com Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Acked-by: Martyn Welch <martyn.welch@collabora.co.uk> Cc: David S. Miller <davem@davemloft.net> Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Martin Donnelly <martin.donnelly@ge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-07-21Merge ra.kernel.org:/pub/scm/linux/kernel/git/torvalds/linuxDavid S. Miller1-8/+10
All conflicts were trivial overlapping changes, so reasonably easy to resolve. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-21MAINTAINERS: Add Eddie as the maintainer for the FSI-attached I2C driverEddie James1-0/+8
Signed-off-by: Eddie James <eajames@linux.vnet.ibm.com> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-07-20MAINTAINERS: add entry for STM32 audio driversArnaud Pouliquen1-0/+8
Add sound/soc/stm drivers entry for STM32 audio drivers from ST Microelectronics. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-20MAINTAINERS: add entry for STI audio driversArnaud Pouliquen1-0/+7
Add sound/soc/sti drivers entry for STI audio drivers from ST Microelectronics. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-19MAINTAINERS: Remove the entry for the orphaned ams driverMichael Hanselmann1-5/+0
I no longer have any hardware with the Apple motion sensor and thus relinquish maintainership of the driver. Remove the maintainers entry entirely, meaning the code will now fall under "LINUX FOR POWER MACINTOSH". Signed-off-by: Michael Hanselmann <linux-kernel@hansmi.ch> [mpe: Drop the entry entirely, munge change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-4/+3
Pull networking fixes from David Miller: "Lots of fixes, here goes: 1) NULL deref in qtnfmac, from Gustavo A. R. Silva. 2) Kernel oops when fw download fails in rtlwifi, from Ping-Ke Shih. 3) Lost completion messages in AF_XDP, from Magnus Karlsson. 4) Correct bogus self-assignment in rhashtable, from Rishabh Bhatnagar. 5) Fix regression in ipv6 route append handling, from David Ahern. 6) Fix masking in __set_phy_supported(), from Heiner Kallweit. 7) Missing module owner set in x_tables icmp, from Florian Westphal. 8) liquidio's timeouts are HZ dependent, fix from Nicholas Mc Guire. 9) Link setting fixes for sh_eth and ravb, from Vladimir Zapolskiy. 10) Fix NULL deref when using chains in act_csum, from Davide Caratti. 11) XDP_REDIRECT needs to check if the interface is up and whether the MTU is sufficient. From Toshiaki Makita. 12) Net diag can do a double free when killing TCP_NEW_SYN_RECV connections, from Lorenzo Colitti. 13) nf_defrag in ipv6 can unnecessarily hold onto dst entries for a full minute, delaying device unregister. From Eric Dumazet. 14) Update MAC entries in the correct order in ixgbe, from Alexander Duyck. 15) Don't leave partial mangles bpf program in jit_subprogs, from Daniel Borkmann. 16) Fix pfmemalloc SKB state propagation, from Stefano Brivio. 17) Fix ACK handling in DCTCP congestion control, from Yuchung Cheng. 18) Use after free in tun XDP_TX, from Toshiaki Makita. 19) Stale ipv6 header pointer in ipv6 gre code, from Prashant Bhole. 20) Don't reuse remainder of RX page when XDP is set in mlx4, from Saeed Mahameed. 21) Fix window probe handling of TCP rapair sockets, from Stefan Baranoff. 22) Missing socket locking in smc_ioctl(), from Ursula Braun. 23) IPV6_ILA needs DST_CACHE, from Arnd Bergmann. 24) Spectre v1 fix in cxgb3, from Gustavo A. R. Silva. 25) Two spots in ipv6 do a rol32() on a hash value but ignore the result. Fixes from Colin Ian King" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (176 commits) tcp: identify cryptic messages as TCP seq # bugs ptp: fix missing break in switch hv_netvsc: Fix napi reschedule while receive completion is busy MAINTAINERS: Drop inactive Vitaly Bordug's email net: cavium: Add fine-granular dependencies on PCI net: qca_spi: Fix log level if probe fails net: qca_spi: Make sure the QCA7000 reset is triggered net: qca_spi: Avoid packet drop during initial sync ipv6: fix useless rol32 call on hash ipv6: sr: fix useless rol32 call on hash net: sched: Using NULL instead of plain integer net: usb: asix: replace mii_nway_restart in resume path net: cxgb3_main: fix potential Spectre v1 lib/rhashtable: consider param->min_size when setting initial table size net/smc: reset recv timeout after clc handshake net/smc: add error handling for get_user() net/smc: optimize consumer cursor updates net/nfc: Avoid stalls when nfc_alloc_send_skb() returned NULL. ipv6: ila: select CONFIG_DST_CACHE net: usb: rtl8150: demote allmulti message to dev_dbg() ...
2018-07-19MAINTAINERS: Drop inactive Vitaly Bordug's emailKrzysztof Kozlowski1-1/+0
The Vitaly Bordug's email bounces ("ru.mvista.com: Name or service not known") and there was no activity (ack, review, sign) since 2009. Cc: Vitaly Bordug <vitb@kernel.crashing.org> Cc: Pantelis Antoniou <pantelis.antoniou@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-18arm64: dts: ti: Add support for AM654 EVM base boardNishanth Menon1-0/+1
The EValuation Module(EVM) platform for AM654 consists of a common Base board + one or more of daughter cards, which include: a) "Personality Modules", which can be specific to a profile, such as ICSSG enabled or Multi-media (including audio). b) SERDES modules, which may be 2 lane PCIe or two port PCIe + USB2 c) Camera daughter card d) various display panels Among other options. There are two basic configurations defined which include an "EVM" configuration and "IDK" (Industrial development kit) which differ in the specific combination of daughter cards that are used. To simplify support, we choose to support just the base board as the core device tree file and all daughter cards would be expected to be device tree overlays. Reviewed-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-07-18arm64: dts: ti: Add Support for AM654 SoCNishanth Menon1-0/+1
The AM654 SoC is a lead device of the K3 Multicore SoC architecture platform, targeted for broad market and industrial control with aim to meet the complex processing needs of modern embedded products. Some highlights of this SoC are: * Quad ARMv8 A53 cores split over two clusters * GICv3 compliant GIC500 * Configurable L3 Cache and IO-coherent architecture * Dual lock-step capable R5F uC for safety-critical applications * High data throughput capable distributed DMA architecture under NAVSS * Three Gigabit Industrial Communication Subsystems (ICSSG), each with dual PRUs and dual RTUs * Hardware accelerator block containing AES/DES/SHA/MD5 called SA2UL * Centralized System Controller for Security, Power, and Resource management. * Dual ADCSS, eQEP/eCAP, eHRPWM, dual CAN-FD * Flash subsystem with OSPI and Hyperbus interfaces * Multimedia capability with CAL, DSS7-UL, SGX544, McASP * Peripheral connectivity including USB3, PCIE, MMC/SD, GPMC, I2C, SPI, GPIO See AM65x Technical Reference Manual (SPRUID7, April 2018) for further details: http://www.ti.com/lit/pdf/spruid7 NOTE: 1. AM654 is the first of the device variants, hence we introduce a generic am65.dtsi. 2. We indicate the proper bus topology, the ranges are elaborated in each bus segment instead of using the top level ranges to make sure that peripherals in each segment use the address space accurately. 3. Peripherals in each bus segment is maintained in a separate dtsi allowing for reuse in different bus segment representation from a different core such as R5. This is also the reason for maintaining a 1-1 address map in the ranges. 4. Cache descriptions follow the ARM64 standard description. Further tweaks may be necessary as we introduce more complex devices, but can be introduced in context of the device introduction. Reviewed-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Benjamin Fair <b-fair@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-07-18dt-bindings: arm: ti: Add bindings for AM654 SoCNishanth Menon1-0/+7
The AM654 SoC is a lead device of the K3 Multicore SoC architecture platform, targeted for broad market and industrial control with aim to meet the complex processing needs of modern embedded products. Some highlights of this SoC are: * Quad ARMv8 A53 cores split over two clusters * GICv3 compliant GIC500 * Configurable L3 Cache and IO-coherent architecture * Dual lock-step capable R5F uC for safety-critical applications * High data throughput capable distributed DMA architecture under NAVSS * Three Gigabit Industrial Communication Subsystems (ICSSG), each with dual PRUs and dual RTUs * Hardware accelerator block containing AES/DES/SHA/MD5 called SA2UL * Centralized System Controller for Security, Power, and Resource management. * Dual ADCSS, eQEP/eCAP, eHRPWM, dual CAN-FD * Flash subsystem with OSPI and Hyperbus interfaces * Multimedia capability with CAL, DSS7-UL, SGX544, McASP * Peripheral connectivity including USB3, PCIE, MMC/SD, GPMC, I2C, SPI, GPIO See AM65x Technical Reference Manual (SPRUID7, April 2018) for further details: http://www.ti.com/lit/pdf/spruid7 Reviewed-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-07-18net: dsa: realtek-smi: Add Realtek SMI driverLinus Walleij1-0/+7
This adds a driver core for the Realtek SMI chips and a subdriver for the RTL8366RB. I just added this chip simply because it is all I can test. The code is a massaged variant of the code that has been sitting out-of-tree in OpenWRT for years in the absence of a proper switch subsystem. This creates a DSA driver for it. I have tried to credit the original authors wherever possible. The main changes I've done from the OpenWRT code: - Added an IRQ chip inside the RTL8366RB switch to demux and handle the line state IRQs. - Distributed the phy handling out to the PHY driver. - Added some RTL8366RB code that was missing in the driver at the time, such as setting up "green ethernet" with a funny jam table and forcing MAC5 (the CPU port) into 1 GBit. - Select jam table and add the default jam table from the vendor driver, also for ASIC "version 0" if need be. - Do not store jam tables in the device tree, store them in the driver. - Pick in the "initvals" jam tables from OpenWRT's driver and make those get selected per compatible for the whole system. It's apparently about electrical settings for this system and whatnot, not really configuration from device tree. - Implemented LED control: beware of bugs because there are no LEDs on the device I am using! We do not implement custom DSA tags. This is explained in a comment in the driver as well: this "tagging protocol" is not simply a few extra bytes tagged on to the ethernet frame as DSA is used to. Instead, enabling the CPU tags will make the switch start talking Realtek RRCP internally. For example a simple ping will make this kind of packets appear inside the switch: 0000 ff ff ff ff ff ff bc ae c5 6b a8 3d 88 99 a2 00 0010 08 06 00 01 08 00 06 04 00 01 bc ae c5 6b a8 3d 0020 a9 fe 01 01 00 00 00 00 00 00 a9 fe 01 02 00 00 0030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 As you can see a custom "8899" tagged packet using the protocol 0xa2. Norm RRCP appears to always have this protocol set to 0x01 according to OpenRRCP. You can also see that this is not a ping packet at all, instead the switch is starting to talk network management issues with the CPU port. So for now custom "tagging" is disabled. This was tested on the D-Link DIR-685 with initramfs and OpenWRT userspaces and works fine on all the LAN ports (lan0 .. lan3). The WAN port is yet not working. Cc: Antti Seppälä <a.seppala@gmail.com> Cc: Roman Yeryomin <roman@advem.lv> Cc: Colin Leitner <colin.leitner@googlemail.com> Cc: Gabor Juhos <juhosg@openwrt.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-17tools/memory-model: Add informal LKMM documentation to MAINTAINERSPaul E. McKenney1-0/+5
The Linux-kernel memory model has been informal, with a number of text files documenting it. It would be good to make sure that these informal descriptions are kept up to date and/or pruned appropriately. This commit therefore brings more of those text files into the LKMM MAINTAINERS file entry. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Andrea Parri <andrea.parri@amarulasolutions.com> Cc: Akira Yokosawa <akiyks@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Daniel Lustig <dlustig@nvidia.com> Cc: David Howells <dhowells@redhat.com> Cc: David S. Miller <davem@davemloft.net> Cc: Jade Alglave <j.alglave@ucl.ac.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luc Maranget <luc.maranget@inria.fr> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arch@vger.kernel.org Cc: parri.andrea@gmail.com Link: http://lkml.kernel.org/r/20180716180605.16115-9-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-07-17MAINTAINERS: Add Daniel Lustig as an LKMM reviewerPalmer Dabbelt1-0/+1
Dan runs the RISC-V memory model working group. I've been forwarding him LKMM emails that end up in my inbox, but I'm far from an expert in this stuff. He requested to be added as a reviewer, which seems sane to me as it'll take a human out of the loop. Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Daniel Lustig <dlustig@nvidia.com> Acked-by: Andrea Parri <andrea.parri@amarulasolutions.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: akiyks@gmail.com Cc: boqun.feng@gmail.com Cc: dhowells@redhat.com Cc: j.alglave@ucl.ac.uk Cc: linux-arch@vger.kernel.org Cc: luc.maranget@inria.fr Cc: npiggin@gmail.com Cc: parri.andrea@gmail.com Cc: stern@rowland.harvard.edu Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/20180716180605.16115-3-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-17 17:56:06 +0300