summaryrefslogtreecommitdiff
path: root/Documentation/devicetree
AgeCommit message (Collapse)AuthorFilesLines
2019-07-02dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schemaAndrew Jeffery2-119/+134
Convert ASPEED pinctrl bindings to DT schema format using json-schema. OpenBMC-Staging-Count: 1 Cc: Johnny Huang <johnny_huang@aspeedtech.com> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-07-02dt-bindings: pinctrl: aspeed: Convert AST2400 bindings to json-schemaAndrew Jeffery2-80/+81
Convert ASPEED pinctrl bindings to DT schema format using json-schema OpenBMC-Staging-Count: 1 Cc: Johnny Huang <johnny_huang@aspeedtech.com> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-07-02dt-bindings: pinctrl: aspeed: Split bindings document in twoAndrew Jeffery2-58/+85
Have one for each of the AST2400 and AST2500. The only thing that was common was the fact that both support ASPEED BMC SoCs. OpenBMC-Staging-Count: 1 Cc: Johnny Huang <johnny_huang@aspeedtech.com> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-06-18Merge tag 'v5.1.11' into dev-5.1Joel Stanley1-0/+1
This is the 5.1.11 stable release Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-06-15Input: goodix - add GT5663 CTP supportJagan Teki1-0/+1
[ Upstream commit a5f50c501321249d67611353dde6d68d48c5b959 ] GT5663 is capacitive touch controller with customized smart wakeup gestures. Add support for it by adding compatible and supported chip data. The chip data on GT5663 is similar to GT1151, like - config data register has 0x8050 address - config data register max len is 240 - config data checksum has 16-bit Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-06-05dt-binding: edac: add NPCM ECC documentationGeorge Hung1-0/+17
Add device tree documentation for Nuvoton BMC ECC OpenBMC-Staging-Count: 1 Signed-off-by: George Hung <george.hung@quantatw.com> Reviewed-by: Avi Fishman <avifishman70@gmail.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-06-04Merge tag 'v5.1.6' into dev-5.1Joel Stanley1-2/+4
This is the 5.1.6 stable release Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-05-31dt-bindings: phy-qcom-qmp: Add UFS PHY resetEvan Green1-2/+4
[ Upstream commit 95cee0b4e30a09a411a17e9a3bc6b72ed92063da ] Add a required reset to the SDM845 UFS phy to express the PHY reset bit inside the UFS controller register space. Before this change, this reset was not expressed in the DT, and the driver utilized two different callbacks (phy_init and phy_poweron) to implement a two-phase initialization procedure that involved deasserting this reset between init and poweron. This abused the two callbacks and diluted their purpose. That scheme does not work as regulators cannot be turned off in phy_poweroff because they were turned on in init, rather than poweron. The net result is that regulators are left on in suspend that shouldn't be. This new scheme gives the UFS reset to the PHY, so that it can fully initialize itself in a single callback. We can then turn regulators on during poweron and off during poweroff. Signed-off-by: Evan Green <evgreen@chromium.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-27Merge tag 'v5.1.5' into dev-5.1Joel Stanley1-0/+2
This is the 5.1.5 stable release Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-05-22dt-bindings: mmc: Add disable-cqe-dcmd property.Christoph Muellner1-0/+2
commit 28f22fb755ecf9f933f045bc0afdb8140641b01c upstream. Add disable-cqe-dcmd as optional property for MMC hosts. This property allows to disable or not enable the direct command features of the command queue engine. Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Fixes: 84362d79f436 ("mmc: sdhci-of-arasan: Add CQHCI support for arasan,sdhci-5.1") Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-07dt-bindings: rtc: Add on-chip ASPEED RTC documentationJoel Stanley1-0/+22
Describe the RTC as used in the ASPEED BMC SoCs. Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> (cherry picked from commit e3b371109e01a9f12715e7d43a3a4e187c246ae3) Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-05-07dt-bindings: gpu: Add ASPEED GFX bindings documentJoel Stanley1-0/+41
This describes the ASPEED BMC SoC's display controller. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Link: https://patchwork.freedesktop.org/patch/msgid/20190403001909.31637-2-joel@jms.id.au (cherry picked from commit eff9f244c1237f681c41dd66b811efec590e9deb) Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-05-07dt-bindings: Add isl68137 as a trivial devicePatrick Venture1-0/+2
The isl68137 is a digital output 7-phrase configurable PWM controller with an AVSBus interface from Intersil. OpenBMC-Staging-Count: 2 Signed-off-by: Patrick Venture <venture@google.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-05-07dt-bindings: Add ir38064 as a trivial devicePatrick Venture1-0/+2
The ir38064 is a voltage regulator from Infineon. OpenBMC-Staging-Count: 2 Signed-off-by: Patrick Venture <venture@google.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-05-07dt-bindings: misc: aspeed-p2a-ctrl: add supportPatrick Venture1-0/+47
Document the ast2400, ast2500 PCI-to-AHB bridge control driver bindings. Signed-off-by: Patrick Venture <venture@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> (cherry picked from commit 28703c6ef6228635f7c8b248c1d846511a2b60a3) Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-05-06dt-binding: peci: add NPCM PECI documentationTomer Maimon1-0/+38
Added device tree binding documentation for Nuvoton BMC NPCM Platform Environment Control Interface(PECI). OpenBMC-Staging-Count: 2 Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-05-06media: dt-bindings: aspeed-video: Add missing memory-region propertyEddie James1-0/+6
Missed documenting this property in the initial commit. OpenBMC-Staging-Count: 2 Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-05-06dt-binding: net: document NPCM7xx EMC DT bindingsTomer Maimon1-0/+36
Added device tree binding documentation for Nuvoton NPCM7xx Ethernet MAC Controller (EMC). OpenBMC-Staging-Count: 3 Signed-off-by: Avi Fishman <avifishman70@gmail.com> Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-05-06dt-binding: bmc: add npcm7xx pci mailbox documentTomer Maimon1-0/+19
Added device tree binding documentation for Nuvoton BMC NPCM7XX PCI mailbox. OpenBMC-Staging-Count: 3 Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-05-06dt-binding: bmc: Add NPCM7xx LPC BPC documentationTomer Maimon1-0/+26
Added device tree binding documentation for Nuvoton BMC NPCM7xx BIOS Post Code (BPC). The NPCM7xx BPC monitoring two configurable I/O addresses written by the host on Low Pin Count (LPC) bus. OpenBMC-Staging-Count: 3 Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-05-06dt-bindings: i2c: npcm7xx: add binding for i2c controllerTomer Maimon1-0/+29
OpenBMC-Staging-Count: 3 Signed-off-by: Tali Perry <tali.perry1@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-05-06dt-binding: mtd: add NPCM FIU controllerTomer Maimon1-0/+64
Added device tree binding documentation for Nuvoton BMC NPCM Flash Interface Unit(FIU) SPI-NOR controller. OpenBMC-Staging-Count: 3 Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-05-06dt-bindings: mfd: Add a document for PECI client MFDJae Hyun Yoo1-0/+34
This commit adds a dt-bindings document for PECI client MFD. OpenBMC-Staging-Count: 3 Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-05-06dt-bindings: Add a document of PECI adapter driver for ASPEED AST24xx/25xx SoCsJae Hyun Yoo1-0/+55
This commit adds a dt-bindings document of PECI adapter driver for ASPEED AST24xx/25xx SoCs. OpenBMC-Staging-Count: 3 Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Haiyue Wang <haiyue.wang@linux.intel.com> Reviewed-by: James Feist <james.feist@linux.intel.com> Reviewed-by: Vernon Mauery <vernon.mauery@linux.intel.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-05-06dt-bindings: Add a document of PECI subsystemJae Hyun Yoo1-0/+43
This commit adds a document of generic PECI bus, adapter and client driver. OpenBMC-Staging-Count: 3 Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Haiyue Wang <haiyue.wang@linux.intel.com> Reviewed-by: James Feist <james.feist@linux.intel.com> Reviewed-by: Vernon Mauery <vernon.mauery@linux.intel.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-05-06dt-bindings: hwmon: pmbus: Add Maxim MAX31785 documentationAndrew Jeffery1-0/+158
OpenBMC-Staging-Count: 7 Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-04-21dt-bindings: add an explanation for internal phy-modeCorentin Labbe1-1/+2
When working on the Allwinner internal PHY, the first work was to use the "internal" mode, but some answer was made my mail on what are really internal mean for PHY. This patch write that in the doc. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-19of_net: Fix residues after of_get_nvmem_mac_address removalPetr Štetiar3-2/+6
I've discovered following discrepancy in the bindings/net/ethernet.txt documentation, where it states following: - nvmem-cells: phandle, reference to an nvmem node for the MAC address; - nvmem-cell-names: string, should be "mac-address" if nvmem is to be.. which is actually misleading and confusing. There are only two ethernet drivers in the tree, cadence/macb and davinci which supports this properties. This nvmem-cell* properties were introduced in commit 9217e566bdee ("of_net: Implement of_get_nvmem_mac_address helper"), but commit afa64a72b862 ("of: net: kill of_get_nvmem_mac_address()") forget to properly clean up this parts. So this patch fixes the documentation by moving the nvmem-cell* properties at the appropriate places. While at it, I've removed unused include as well. Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Fixes: afa64a72b862 ("of: net: kill of_get_nvmem_mac_address()") Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08Merge tag 'armsoc-fixes' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Olof Johansson: "A collection of fixes from the last few weeks. Most of them are smaller tweaks and fixes to DT and hardware descriptions for boards. Some of the more significant ones are: - eMMC and RGMII stability tweaks for rk3288 - DDC fixes for Rock PI 4 - Audio fixes for two TI am335x eval boards - D_CAN clock fix for am335x - Compilation fixes for clang - !HOTPLUG_CPU compilation fix for one of the new platforms this release (milbeaut) - A revert of a gpio fix for nomadik that instead was fixed in the gpio subsystem - Whitespace fix for the DT JSON schema (no tabs allowed)" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits) ARM: milbeaut: fix build with !CONFIG_HOTPLUG_CPU ARM: iop: don't use using 64-bit DMA masks ARM: orion: don't use using 64-bit DMA masks Revert "ARM: dts: nomadik: Fix polarity of SPI CS" dt-bindings: cpu: Fix JSON schema arm/mach-at91/pm : fix possible object reference leak ARM: dts: at91: Fix typo in ISC_D0 on PC9 ARM: dts: Fix dcan clkctrl clock for am3 reset: meson-audio-arb: Fix missing .owner setting of reset_controller_dev dt-bindings: reset: meson-g12a: Add missing USB2 PHY resets ARM: dts: rockchip: Remove #address/#size-cells from rk3288-veyron gpio-keys ARM: dts: rockchip: Remove #address/#size-cells from rk3288 mipi_dsi ARM: dts: rockchip: Fix gpu opp node names for rk3288 ARM: dts: am335x-evmsk: Correct the regulators for the audio codec ARM: dts: am335x-evm: Correct the regulators for the audio codec ARM: OMAP2+: add missing of_node_put after of_device_is_available ARM: OMAP1: ams-delta: Fix broken GPIO ID allocation arm64: dts: stratix10: add the sysmgr-syscon property from the gmac's arm64: dts: rockchip: fix rk3328 sdmmc0 write errors arm64: dts: rockchip: fix rk3328 rgmii high tx error rate ...
2019-04-08dt-bindings: cpu: Fix JSON schemaMaxime Ripard1-1/+1
Commit fd73403a4862 ("dt-bindings: arm: Add SMP enable-method for Milbeaut") added support for a new cpu enable-method, but did so using tabulations to ident. This is however invalid in the syntax, and resulted in a failure when trying to use that schemas for validation. Use spaces instead of tabs to indent to fix this. Fixes: fd73403a4862 ("dt-bindings: arm: Add SMP enable-method for Milbeaut") Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Sugaya Taichi <sugaya.taichi@socionext.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-03Merge tag 'hwmon-for-v5.1-rc4' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "Couple of minor hwmon fixes" * tag 'hwmon-for-v5.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: dt-bindings: hwmon: (adc128d818) Specify ti,mode property size hwmon: (ntc_thermistor) Fix temperature type reporting hwmon: (occ) Fix power sensor indexing hwmon: (w83773g) Select REGMAP_I2C to fix build error
2019-03-30Merge tag 'tty-5.1-rc3' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are some small tty and serial driver fixes for 5.1-rc3. Nothing major here, just a number of potential problems fixes for error handling paths, as well as some other minor bugfixes for reported issues with 5.1-rc1. All of these have been in linux-next with no reported issues" * tag 'tty-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: fix NULL pointer issue when tty_port ops is not set Disable kgdboc failed by echo space to /sys/module/kgdboc/parameters/kgdboc dt-bindings: serial: Add compatible for Mediatek MT8183 tty/serial: atmel: RS485 HD w/DMA: enable RX after TX is stopped tty/serial: atmel: Add is_half_duplex helper serial: sh-sci: Fix setting SCSCR_TIE while transferring data serial: ar933x_uart: Fix build failure with disabled console tty: serial: qcom_geni_serial: Initialize baud in qcom_geni_console_setup sc16is7xx: missing unregister/delete driver on error in sc16is7xx_init() tty: mxs-auart: fix a potential NULL pointer dereference tty: atmel_serial: fix a potential NULL pointer dereference serial: max310x: Fix to avoid potential NULL pointer dereference serial: mvebu-uart: Fix to avoid a potential NULL pointer dereference
2019-03-30Merge branch 'i2c/for-current' of ↵Linus Torvalds5-0/+0
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "A new ID for the i801 driver and some Documentation fixes to make it easier for people to find the bindings (which is also a basis for further improvements in that area)" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: wmt: make bindings file name match the driver i2c: sun6i-p2wi: make bindings file name match the driver i2c: stu300: make bindings file name match the driver i2c: mt65xx: make bindings file name match the driver i2c: iop3xx: make bindings file name match the driver i2c: i801: Add support for Intel Comet Lake
2019-03-29dt-bindings: hwmon: (adc128d818) Specify ti,mode property sizeCarlos Menin1-2/+2
By default, cells in DT are 32-bit in size. The driver reads "ti,mode" using the function of_property_read_u8() which causes the value to be read incorrectly in little-endian architectures if the size is not specified. Make it explicit in the binding documentation that this prorperty must be set as a 8-bit value. Signed-off-by: Carlos Menin <menin@carlosaurelio.net> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-03-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-7/+66
Pull networking fixes from David Miller: "Fixes here and there, a couple new device IDs, as usual: 1) Fix BQL race in dpaa2-eth driver, from Ioana Ciornei. 2) Fix 64-bit division in iwlwifi, from Arnd Bergmann. 3) Fix documentation for some eBPF helpers, from Quentin Monnet. 4) Some UAPI bpf header sync with tools, also from Quentin Monnet. 5) Set descriptor ownership bit at the right time for jumbo frames in stmmac driver, from Aaro Koskinen. 6) Set IFF_UP properly in tun driver, from Eric Dumazet. 7) Fix load/store doubleword instruction generation in powerpc eBPF JIT, from Naveen N. Rao. 8) nla_nest_start() return value checks all over, from Kangjie Lu. 9) Fix asoc_id handling in SCTP after the SCTP_*_ASSOC changes this merge window. From Marcelo Ricardo Leitner and Xin Long. 10) Fix memory corruption with large MTUs in stmmac, from Aaro Koskinen. 11) Do not use ipv4 header for ipv6 flows in TCP and DCCP, from Eric Dumazet. 12) Fix topology subscription cancellation in tipc, from Erik Hugne. 13) Memory leak in genetlink error path, from Yue Haibing. 14) Valid control actions properly in packet scheduler, from Davide Caratti. 15) Even if we get EEXIST, we still need to rehash if a shrink was delayed. From Herbert Xu. 16) Fix interrupt mask handling in interrupt handler of r8169, from Heiner Kallweit. 17) Fix leak in ehea driver, from Wen Yang" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (168 commits) dpaa2-eth: fix race condition with bql frame accounting chelsio: use BUG() instead of BUG_ON(1) net: devlink: skip info_get op call if it is not defined in dumpit net: phy: bcm54xx: Encode link speed and activity into LEDs tipc: change to check tipc_own_id to return in tipc_net_stop net: usb: aqc111: Extend HWID table by QNAP device net: sched: Kconfig: update reference link for PIE net: dsa: qca8k: extend slave-bus implementations net: dsa: qca8k: remove leftover phy accessors dt-bindings: net: dsa: qca8k: support internal mdio-bus dt-bindings: net: dsa: qca8k: fix example net: phy: don't clear BMCR in genphy_soft_reset bpf, libbpf: clarify bump in libbpf version info bpf, libbpf: fix version info and add it to shared object rxrpc: avoid clang -Wuninitialized warning tipc: tipc clang warning net: sched: fix cleanup NULL pointer exception in act_mirr r8169: fix cable re-plugging issue net: ethernet: ti: fix possible object reference leak net: ibm: fix possible object reference leak ...
2019-03-27dt-bindings: serial: Add compatible for Mediatek MT8183Erin Lo1-0/+1
This adds dt-binding documentation of uart for Mediatek MT8183 SoC Platform. Signed-off-by: Erin Lo <erin.lo@mediatek.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-27i2c: wmt: make bindings file name match the driverWolfram Sang1-0/+0
If we use the "i2c-" prefix for the binding documentation file name, then it should match the file name of the driver, if possible. It is possible for this driver, so rename it. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-03-27i2c: sun6i-p2wi: make bindings file name match the driverWolfram Sang1-0/+0
If we use the "i2c-" prefix for the binding documentation file name, then it should match the file name of the driver, if possible. It is possible for this driver, so rename it. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-03-27i2c: stu300: make bindings file name match the driverWolfram Sang1-0/+0
If we use the "i2c-" prefix for the binding documentation file name, then it should match the file name of the driver, if possible. It is possible for this driver, so rename it. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-03-27i2c: mt65xx: make bindings file name match the driverWolfram Sang1-0/+0
If we use the "i2c-" prefix for the binding documentation file name, then it should match the file name of the driver, if possible. It is possible for this driver, so rename it. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-03-27i2c: iop3xx: make bindings file name match the driverWolfram Sang1-0/+0
If we use the "i2c-" prefix for the binding documentation file name, then it should match the file name of the driver, if possible. It is possible for this driver, so rename it. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-03-26dt-bindings: net: dsa: qca8k: support internal mdio-busChristian Lamparter1-5/+64
This patch updates the qca8k's binding to document to the approach for using the internal mdio-bus of the supported qca8k switches. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-26dt-bindings: net: dsa: qca8k: fix exampleChristian Lamparter1-2/+2
In the example, the phy at phy@0 is clashing with the switch0@0 at the same address. Usually, the switches are accessible through pseudo PHYs which in case of the qca8k are located at 0x10 - 0x18. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21Merge tag 'irqchip-5.1-2' of ↵Thomas Gleixner1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip updates for 5.1 from Marc Zyngier: - irqsteer error handling fix - GICv3 range coalescing fix - stm32 coprocessor coexistence fixes - mbigen MSI teardown fix - non-DT secondary GIC infrastructure removed - various cleanups (brcmstb-l2, mmp) - new DT bindings (r8a774c0)
2019-03-21dt-bindings: irqchip: renesas-irqc: Document r8a774c0 supportFabrizio Castro1-0/+1
Document RZ/G2E (R8A774C0) SoC bindings. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-03-16Merge tag 'fbdev-v5.1' of git://github.com/bzolnier/linuxLinus Torvalds1-2/+0
Pull fbdev updates from Bartlomiej Zolnierkiewicz: "Just a couple of small fixes and cleanups: - fix memory access if logo is bigger than the screen (Manfred Schlaegl) - silence fbcon logo on 'quiet' boots (Prarit Bhargava) - use kvmalloc() for scrollback buffer in fbcon (Konstantin Khorenko) - misc fixes (Colin Ian King, YueHaibing, Matteo Croce, Mathieu Malaterre, Anders Roxell, Arnd Bergmann) - misc cleanups (Rob Herring, Lubomir Rintel, Greg Kroah-Hartman, Jani Nikula, Michal Vokáč)" * tag 'fbdev-v5.1' of git://github.com/bzolnier/linux: fbdev: mbx: fix a misspelled variable name fbdev: omap2: fix warnings in dss core video: fbdev: Fix potential NULL pointer dereference fbcon: Silence fbcon logo on 'quiet' boots printk: Export console_printk ARM: dts: imx28-cfa10036: Fix the reset gpio signal polarity video: ssd1307fb: Do not hard code active-low reset sequence dt-bindings: display: ssd1307fb: Remove reset-active-low from examples fbdev: fbmem: fix memory access if logo is bigger than the screen video/fbdev: refactor video= cmdline parsing fbdev: mbx: fix up debugfs file creation fbdev: omap2: no need to check return value of debugfs_create functions video: fbdev: geode: remove ifdef OLPC noise video: offb: annotate implicit fall throughs omapfb: fix typo fbdev: Use of_node_name_eq for node name comparisons fbcon: use kvmalloc() for scrollback buffer fbdev: chipsfb: remove set but not used variable 'size' fbdev/via: fix spelling mistake "Expandsion" -> "Expansion"
2019-03-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-0/+5
Pull networking fixes from David Miller: "More fixes in the queue: 1) Netfilter nat can erroneously register the device notifier twice, fix from Florian Westphal. 2) Use after free in nf_tables, from Pablo Neira Ayuso. 3) Parallel update of steering rule fix in mlx5 river, from Eli Britstein. 4) RX processing panic in lan743x, fix from Bryan Whitehead. 5) Use before initialization of TCP_SKB_CB, fix from Christoph Paasch. 6) Fix locking in SRIOV mode of mlx4 driver, from Jack Morgenstein. 7) Fix TX stalls in lan743x due to mishandling of interrupt ACKing modes, from Bryan Whitehead. 8) Fix infoleak in l2tp_ip6_recvmsg(), from Eric Dumazet" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits) pptp: dst_release sk_dst_cache in pptp_sock_destruct MAINTAINERS: GENET & SYSTEMPORT: Add internal Broadcom list l2tp: fix infoleak in l2tp_ip6_recvmsg() net/tls: Inform user space about send buffer availability net_sched: return correct value for *notify* functions lan743x: Fix TX Stall Issue net/mlx4_core: Fix qp mtt size calculation net/mlx4_core: Fix locking in SRIOV mode when switching between events and polling net/mlx4_core: Fix reset flow when in command polling mode mlxsw: minimal: Initialize base_mac mlxsw: core: Prevent duplication during QSFP module initialization net: dwmac-sun8i: fix a missing check of of_get_phy_mode net: sh_eth: fix a missing check of of_get_phy_mode net: 8390: fix potential NULL pointer dereferences net: fujitsu: fix a potential NULL pointer dereference net: qlogic: fix a potential NULL pointer dereference isdn: hfcpci: fix potential NULL pointer dereference Documentation: devicetree: add a new optional property for port mac address net: rocker: fix a potential NULL pointer dereference net: qlge: fix a potential NULL pointer dereference ...
2019-03-14Merge tag 'dmaengine-5.1-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds6-7/+69
Pull dmaengine updates from Vinod Koul: - dmatest updates for modularizing common struct and code - remove SG support for VDMA xilinx IP and updates to driver - Update to dw driver to support Intel iDMA controllers multi-block support - tegra updates for proper reporting of residue - Add Snow Ridge ioatdma device id and support for IOATDMA v3.4 - struct_size() usage and useless LIST_HEAD cleanups in subsystem. - qDMA controller driver for Layerscape SoCs - stm32-dma PM Runtime support - And usual updates to imx-sdma, sprd, Documentation, fsl-edma, bcm2835, qcom_hidma etc * tag 'dmaengine-5.1-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (81 commits) dmaengine: imx-sdma: fix consistent dma test failures dmaengine: imx-sdma: add a test for imx8mq multi sdma devices dmaengine: imx-sdma: add clock ratio 1:1 check dmaengine: dmatest: move test data alloc & free into functions dmaengine: dmatest: add short-hand `buf_size` var in dmatest_func() dmaengine: dmatest: wrap src & dst data into a struct dmaengine: ioatdma: support latency tolerance report (LTR) for v3.4 dmaengine: ioatdma: add descriptor pre-fetch support for v3.4 dmaengine: ioatdma: disable DCA enabling on IOATDMA v3.4 dmaengine: ioatdma: Add Snow Ridge ioatdma device id dmaengine: sprd: Change channel id to slave id for DMA cell specifier dt-bindings: dmaengine: sprd: Change channel id to slave id for DMA cell specifier dmaengine: mv_xor: Use correct device for DMA API Documentation :dmaengine: clarify DMA desc. pointer after submission Documentation: dmaengine: fix dmatest.rst warning dmaengine: k3dma: Add support for dma-channel-mask dmaengine: k3dma: Delete axi_config dmaengine: k3dma: Upgrade k3dma driver to support hisi_asp_dma hardware Documentation: bindings: dma: Add binding for dma-channel-mask Documentation: bindings: k3dma: Extend the k3dma driver binding to support hisi-asp ...
2019-03-14Merge tag 'rproc-v5.1' of git://github.com/andersson/remoteprocLinus Torvalds3-12/+95
Pull remoteproc updates from Bjorn Andersson: "This contains the last patches in Loic's remoteproc resource table handling changes, a number of updates to documentation, support for invoking the crash handler (for testing purposes), a fix for the handling of virtio devices during recovery, performance state votes in Qualcomm modem driver, support for specifying board specific firmware path for Qualcomm modem driver and improved support for graceful shutdown of Qualcomm remoteprocs" * tag 'rproc-v5.1' of git://github.com/andersson/remoteproc: (33 commits) remoteproc: fix for "dma-mapping: remove the DMA_MEMORY_EXCLUSIVE flag" remoteproc: fix rproc_check_carveout_da() returned error and comments remoteproc: fix trace buffer va initialization remoteproc: fix rproc_alloc_carveout() for rproc with iommu domain remoteproc: add warning on resource table cast remoteproc: fix rproc_alloc_carveout() bad variable cast remoteproc: fix rproc_da_to_va in case of unallocated carveout remoteproc: correct rproc_mem_entry_init() comments remoteproc: fix recovery procedure rpmsg: virtio: change header file sort style rpmsg: virtio: allocate buffer from parent remoteproc: st: add reserved memory support remoteproc: create vdev subdevice with specific dma memory pool remoteproc: q6v5_adsp: Remove voting for lpass_aon clock dt-binding: remoteproc: Remove lpass_aon clock from adsp pil clock list remoteproc: q6v5-mss: Active powerdomain for SDM845 remoteproc: q6v5-mss: Vote for rpmh power domains remoteproc: qcom: Add support for parsing fw dt bindings remoteproc: qcom_q6v5: don't auto boot remote processor remoteproc: qcom: Wait for shutdown-ack/ind on sysmon shutdown ...
2019-03-14Merge tag 'clk-for-linus' of ↵Linus Torvalds11-54/+183
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk subsystem updates from Stephen Boyd: "We have a fairly balanced mix of clk driver updates and clk framework updates this time around. It's the usual pile of new drivers for new hardware out there and the normal small fixes and updates, but then we have some core framework changes too. In the core framework, we introduce support for a clk_get_optional() API to get clks that may not always be populated and a way to devm manage clkdev lookups registered by provider drivers. We also do some refactoring to simplify the interface between clkdev and the common clk framework so we can reuse the DT parsing and clk_get() path in provider drivers in the future. This work will continue in the next few cycles while we convert how providers specify clk parents. On the driver side, the biggest part of the dirstat is the Amlogic clk driver that got support for the G12A SoC. It dominates with almost half the overall diff, while the second largest part of the diff is in the i.MX clk driver that gained support for imx8mm SoCs. After that, we have the Actions Semiconductor and Qualcomm drivers rounding out the big part of the dirstat because they both got new hardware support for SoCs. The rest is just various updates and non-critical fixes for existing drivers. Core: - Convert a few clk bindings to JSON schema format - Add a {devm_}clk_get_optional() API - Add devm_clk_hw_register_clkdev() API to manage clkdev lookups - Start rewriting clk parent registration and supporting device links by moving around code that supports clk_get() and DT parsing of the 'clocks' property New Drivers: - Add Qualcomm MSM8998 RPM managed clks - IPA clk support on Qualcomm RPMh clk controllers - Actions Semi S500 SoC clk support - Support for fixed rate clks populated from an MMIO register - Add RPC (QSPI/HyperFLASH) clocks on Renesas R-Car V3H - Add TMU (timer) clocks on Renesas RZ/G2E - Add Amlogic G12A Always-On Clock Controller - Add 32k clock generation for Amlogic AXG - Add support for the Mali GPU clocks on Amlogic Meson8 - Add Amlogic G12A EE clock controller driver - Add missing CANFD clocks on Renesas RZ/G2M and RZ/G2E - Add i.MX8MM SoC clk driver support Removed Drivers: - Remove clps711x driver as the board support is gone Updates: - 3rd ECO fix for Mediatek MT2712 SoCs - Updates for Qualcomm MSM8998 GCC clks - Random static analysis fixes for clk drivers - Support for sleeping gpios in the clk-gpio type - Minor fixes for STM32MP1 clk driver (parents, critical flag, etc.) - Split LCDC into two clks on the Marvell MMP2 SoC - Various DT of_node refcount fixes - Get rid of CLK_IS_BASIC from TI code (yay!) - TI Autoidle clk support - Fix Amlogic Meson8 APB clock ID name - Claim input clocks through DT for Amlogic AXG and GXBB - Correct the DU (display unit) parent clock on Renesas RZ/G2E - Exynos5433 IMEM CMU crypto clk support (SlimSS) - Fix for the PLL-MIPI on the Allwinner A23 - Fix Rockchip rk3328 PLL rate calculation - Add SET_RATE_PARENT flag on display clk of Rockhip rk3066 - i.MX SCU clk driver clk_set_parent() and cpufreq support" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (150 commits) dt-bindings: clock: imx8mq: Fix numbering overlaps and gaps clk: ti: clkctrl: Fix clkdm_name regression for TI_CLK_CLKCTRL_COMPAT clk: fixup default index for of_clk_get_by_name() clk: Move of_clk_*() APIs into clk.c from clkdev.c clk: Inform the core about consumer devices clk: Introduce of_clk_get_hw_from_clkspec() clk: core: clarify the check for runtime PM clk: Combine __clk_get() and __clk_create_clk() clk: imx8mq: add GPIO clocks to clock tree clk: mediatek: correct cpu clock name for MT8173 SoC clk: imx: Refactor entire sccg pll clk clk: imx: scu: add cpu frequency scaling support clk: mediatek: Mark bus and DRAM related clocks as critical clk: mediatek: Add flags to mtk_gate clk: mediatek: Add MUX_FLAGS macro clk: qcom: gcc-sdm845: Define parent of PCIe PIPE clocks clk: ingenic: Remove set but not used variable 'enable' clk: at91: programmable: remove unneeded register read clk: mediatek: using CLK_MUX_ROUND_CLOSEST for the clock of dpi1_sel clk: mediatek: add MUX_GATE_FLAGS_2 ...
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-22 12:15:42 +0300