summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/rtc
AgeCommit message (Collapse)AuthorFilesLines
2019-04-04rtc: x1205: Add DT bindingsLinus Walleij1-0/+1
This adds device tree bindings for the Xircom X1205 RTC found in the Linksys NSLU2. Cc: devicetree@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> [alexandre.belloni@bootlin.com: move doc to rtc.txt] Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-03-03dt-bindings: rtc: add rx8571 compatibleBiju Das1-0/+1
The Epson rx8571 is compatible with the Epson rx8581 RTC. The difference between the rx8571 and rx8581 RTC is that the former has 16 bytes more RAM. This renders them incompatible from a DT point of view. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-02-17dt-bindings: rtc: add ABEOZ9Artem Panfilov1-0/+1
Add ABEOZ9 to the list of trivial RTCs Signed-off-by: Artem Panfilov <panfilov.artyom@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-02-17rtc: rv3028: add new driverAlexandre Belloni1-0/+1
Add a driver for the MicroCrystal RV-3028. It is a SMT Real-Time Clock Module that incorporates an integrated CMOS circuit together with an XTAL. It has an i2c interface. The driver handles date/time, alarms, trickle charging, timestamping, frequency offset correction, EEPROM and NVRAM. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-02-17dt-bindings: rtc: Update for new chip in isl1208 seriesTrent Piepho2-29/+38
Since this documents multiple chips controlled by the isl1208 driver, name it isil,isl1208.txt, as the convention is to use the base driver name in the bindings document for drivers with multiple devices. Include all chips supported by this driver in the docs. Make it clear which properties apply to which chips. Expand documentation for existing isil,evienb property to explain operation in more detail. Existing docs just describe it in terms of setting a bit in a register. CC: Alessandro Zummo <a.zummo@towertech.it> CC: Alexandre Belloni <alexandre.belloni@bootlin.com> CC: Rob Herring <robh+dt@kernel.org> CC: Mark Rutland <mark.rutland@arm.com> CC: devicetree@vger.kernel.org Signed-off-by: Trent Piepho <tpiepho@impinj.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-02-11dt-bindings: rtc: add device-tree bindings for the Amlogic Meson RTCMartin Blumenstingl1-0/+35
The 32-bit Amlogic Meson SoCs (Meson6, Meson8, Meson8b and Meson8m2) have a built-in RTC block. It has the following inputs: - an 32.768kHz crystal oscillator - an interrupt line - a reset line - 0.9V voltage input Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> [resurrected patches from Ben after 2 years] Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-01-30dt-bindings: rtc: Add RV1805 to abracon,abx80x bindingsMarek Vasut1-0/+1
Add compatible string for Microcrystal RV1805 RTC, which is compatible with AB1805. The RV1805 uses smaller 10 pin package, while the AB1805 uses larger 16pin package, however the die inside the chip is the same. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Rob Herring <robh+dt@kernel.org> To: devicetree@vger.kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-01-22dt-bindings: rtc: Add bindings for Cadence RTCJan Kotas1-0/+25
This patch adds a DT binding documentation for Cadence RTC controller. Signed-off-by: Jan Kotas <jank@cadence.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-01-22dt-binding: pcf85063: add xtal load capacitanceSam Ravnborg2-1/+18
The NXP pcf85063 supports two different xtal load capacitance - 7000fF (7pF) HW default, Linux driver default - 12500fF (12.5pF) Minimum power consumption To obtain a precise RTC the pcf85063 must be configured with the correct capacitance load of the xtal. Add a property to specify the xtal capacitance load. The default value matches that of the current Linux driver. With a dedicated binding remove the entry in rtc.txt Signed-off-by: Søren Andersen <san@skov.dk> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Urs Fässler <urs.fassler@bbv.ch> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-01-22dt-binding: pcf8523: add xtal load capacitanceSam Ravnborg2-1/+18
The NXP pcf8523 supports two different xtal load capacitance - 7000fF (7pF) HW default - 12500fF (12.5pF) Minimum power consumption, driver default To obtain a precise RTC the pcf8523 must be configured with the correct capacitance load of the xtal. Add a property to specify the xtal capacitance load. The default value matches that of the current Linux driver. With a dedicated binding remove the entry in rtc.txt Signed-off-by: Søren Andersen <san@skov.dk> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Rob Herring <robh@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-01-22dt-bindings: rtc: Add quartz-load-femtofarads propertySam Ravnborg1-6/+10
The quartz-load-femtofarads are relevant for several users. Add it as a common property in rtc. Note that valid values and default values must be documented. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Suggested-by: Rob Herring <robh+dt@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-01-10rtc: pcf8523: Add rv8523 compatibleAlexandre Belloni1-0/+1
The Microcrystal RV-8523 is compatible with the PCF8523. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-01-10dt-bindings: rtc: sd3078: add device tree documentationDianlong Li1-0/+1
The devicetree documentation for the SD3078 device tree. Signed-off-by: Dianlong Li <long17.cool@163.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-01-02Merge tag 'rtc-4.21' of ↵Linus Torvalds5-11/+31
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "Subsystem: - new %ptR printk format - rename core files - allow registration of multiple nvmem devices New driver: - i.MX system controller RTC Driver updates: - abx80x: handle voltage ioctls, correct binding doc - m41t80: correct month in alarm reads - pcf85363: add pcf85263 support - pcf8523: properly handle battery low flag - s3c: limit alarm to one year in the future as ALMYEAR is broken - sun6i: rework clock output binding" * tag 'rtc-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (54 commits) rtc: rename core files rtc: nvmem: fix possible use after free rtc: add i.MX system controller RTC support dt-bindings: fsl: scu: add rtc binding rtc: pcf2123: Add Microcrystal rv2123 rtc: class: reimplement devm_rtc_device_register rtc: enforce rtc_timer_init private_data type rtc: abx80x: Implement RTC_VL_READ,CLR ioctls rtc: pcf85363: Add support for NXP pcf85263 rtc dt-bindings: rtc: pcf85363: Document pcf85263 real-time clock rtc: pcf8523: don't return invalid date when battery is low dt-bindings: rtc: use a generic node name for ds1307 PM: Switch to use %ptR m68k/mac: Switch to use %ptR Input: hp_sdc_rtc - Switch to use %ptR rtc: tegra: Switch to use %ptR rtc: s5m: Switch to use %ptR rtc: s3c: Switch to use %ptR rtc: rx8025: Switch to use %ptR rtc: rx6110: Switch to use %ptR ...
2018-12-19rtc: pcf2123: Add Microcrystal rv2123Alexandre Belloni1-0/+1
Add a compatible string for Microcrystal rv2123 as the reset procedure seem to be differing. However, the current driver works just fine. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-12-11dt-bindings: rtc: pcf85363: Document pcf85263 real-time clockBiju Das1-2/+2
The pcf85263 RTC is compatible with the pcf85363 RTC. The difference between the pcf85263 and pcf85363 RTC is that the latter has 64 bytes more RAM. This renders them incompatible from a DT point of view. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-12-11dt-bindings: rtc: use a generic node name for ds1307Lubomir Rintel1-1/+1
The example should follow the practice or using a generic node name instead of the precise programming model, as recommended by the DTSpec. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-12-07dt-bindings: rtc: sun6i-rtc: Fix register range in exampleChen-Yu Tsai1-1/+1
The register range for the RTC extends beyond 0x54. Use the size from the user manual's memory map instead. Fixes: 9765d2d94309 ("rtc: sun6i: Add sun6i RTC driver") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-12-06dt-bindings: rtc: sun6i-rtc: Export internal RC oscillatorChen-Yu Tsai1-1/+2
Experiments showed that on at least the H3/H5/A64 the RTC's internal oscillator also feeds the CPUS mux in the PRCM. Export this clock through the device tree, instead of having to use a dummy fixed-clock device node, for the PRCM to consume. This will properly describe the relationship between the clocks. Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-12-06dt-bindings: rtc: sun6i-rtc: Deprecate external clock output for A31Chen-Yu Tsai1-2/+4
The A31 does not have an external clock output directly from the RTC. Instead, it has four muxable clock outputs: three (A, B, C) are controlled from the CCU, and the last (D) is controlled from the PRCM. Deprecate the usage of the external clock output for the A31 compatible. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-12-06dt-bindings: rtc: sun6i-rtc: Add compatible strings for pre-H6 variantsChen-Yu Tsai1-1/+15
While doing Bluetooth enablement for various boards based on various Allwinner SoCs, minor differences in the RTC modules were found. These include a lack of an external clock output (A31), different internal oscillator frequencies (H3/H5/A64/V3/V3s), different regulator voltage settings (H5/H6), and the presence of miscellaneous registers unrelated to the RTC (A64/R40/H5/H6). The datasheet also describes different number of registers for non-volatile storage, though based on actual experiments the actual number is the same across the board. This patch adds a list of all pre-H6 variants, grouped by the internal oscillator's clock rate, regulator settings, and the presence of the external clock output. Combinations are introduced for the variants that have miscellaneous registers. The RTC block in the H6 also handles the 24 MHz DCXO. This will require more device tree binding changes and will be done later. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-12-06dt-bindings: rtc: sun6i-rtc: Rewrite clock outputs as a listChen-Yu Tsai1-4/+6
The clock output section for this binding describes the two outputs in the descriptions for both the #clock-cells and clock-output-names properties. Instead of overlapping information that is hard to read, rewrite the clock outputs as a list of indices and descriptions. The properies can reference this list instead. This will also make it easier to add notes or conditions to the clocks, and also for adding new outputs. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-12-04dt-bindings: rtc: Move trivial RTCs to rtc.txtAlexandre Belloni1-0/+34
Move trivial RTCs to the rtc generic binding documentation as they all also support at least 'start-year'. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Rob Herring <robh@kernel.org>
2018-12-04dt-bindings: rtc: add generic bindingsAlexandre Belloni1-0/+30
Add generic binding documentation for the RTC subsystem. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Rob Herring <robh@kernel.org>
2018-11-22rtc: dt-binding: abx80x: fix resistance scaleBaruch Siach1-1/+1
The abracon,tc-resistor property value is in kOhm. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-08-21Merge tag 'rtc-4.19' of ↵Linus Torvalds2-0/+30
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "It is now possible to add custom sysfs attributes while avoiding a possible race condition. Unused code has been removed resulting in a nice reduction of the code base. And more drivers have been switched to SPDX by their maintainers. Summary: Subsystem: - new helpers to add custom sysfs attributes - struct rtc_task removal along with rtc_irq_[un]register() - rtc_irq_set_state and rtc_irq_set_freq are not exported anymore Drivers: - armada38x: reset after rtc power loss - ds1307: now supports m41t11 - isl1208: now supports isl1219 and tamper detection - pcf2127: internal SRAM support" * tag 'rtc-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (34 commits) rtc: ds1307: simplify hwmon config rtc: s5m: Add SPDX license identifier rtc: maxim: Add SPDX license identifiers rtc: isl1219: add device tree documentation rtc: isl1208: set ev-evienb bit from device tree rtc: isl1208: Add "evdet" interrupt source for isl1219 rtc: isl1208: add support for isl1219 with tamper detection rtc: sysfs: facilitate attribute add to rtc device rtc: remove struct rtc_task char: rtc: remove task handling rtc: pcf85063: preserve control register value between stop and start rtc: sh: remove unused variable rtc_dev rtc: unexport rtc_irq_set_* rtc: simplify rtc_irq_set_state/rtc_irq_set_freq rtc: remove irq_task and irq_task_lock rtc: remove rtc_irq_register/rtc_irq_unregister rtc: sh: remove dead code rtc: sa1100: don't set PIE frequency rtc: ds1307: support m41t11 variant rtc: ds1307: fix data pointer to m41t0 ...
2018-08-15rtc: isl1219: add device tree documentationDenis Osterland1-0/+29
The devicetree documentation for the ISL1219 device tree binding is added with a short example. It is not a trivial device, because it supports two interrupt sources. Signed-off-by: Denis Osterland <Denis.Osterland@diehl.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-07-25dt-bindings: remove 'interrupt-parent' from bindingsRob Herring11-16/+0
'interrupt-parent' is often documented as part of define bindings, but it is really outside the scope of a device binding. It's never required in a given node as it is often inherited from a parent node. Or it can be implicit if a parent node is an 'interrupt-controller' node. So remove it from all the binding files. Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2018-07-17rtc: ds1307: support m41t11 variantGiulio Benetti1-0/+1
The m41t11 variant is very similar to the already supported m41t00 and m41t0, but it has also 56 bytes of NVRAM. Add it to driver taking into account NVRAM section. Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-05-22dt-bindings: rtc: update stm32-rtc documentation for stm32mp1 rtcAmelie Delaunay1-7/+20
RTC embedded in stm32mp1 SoC is slightly different from stm32h7 one, it doesn't require to disable backup domain write protection, and rtc_ck parent clock assignment isn't allowed. To sum up, stm32mp1 RTC requires 2 clocks, pclk and rtc_ck, and an RTC alarm interrupt. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-05-14dt-bindings: rtc-2123: Make the node name genericFabio Estevam1-1/+1
According to Devicetree Specification v0.2 document: "The name of a node should be somewhat generic, reflecting the function of the device and not its precise programming model." Do as suggested in the binding example. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-05-06dt-bindings: rtc: update stm32-rtc documentation for st, syscfg propertyAmelie Delaunay1-4/+6
RTC driver should not be aware of the PWR registers offset and bits position. Furthermore, we can imagine that Disable Backup Protection (DBP) relative register and bit mask could change depending on the SoC. So this patch moves st,syscfg property from single pwrcfg phandle to pwrcfg phandle/offset/mask triplet. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-17rtc: isl12026: new driver.David Daney1-0/+28
The ISL12026 is a combination RTC and EEPROM device with I2C interface. The standard RTC driver interface is provided. The EEPROM is accessed via the NVMEM interface. Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-01-12dt-bindings: rtc: add bindings for i.MX53 SRTCPatrick Bruenn1-0/+17
Document the binding for i.MX53 SRTC implemented by rtc-mxc_v2 Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-11-23Merge tag 'rtc-4.15' of ↵Linus Torvalds4-7/+72
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "There is nothing scary this cycle, mostly driver fixes and updates. The core fix has been in for a while and has been tested on multiple kernel revisions by multiple teams. Core: - Fix setting the alarm to the next expiring timer New drivers: - Mediatek MT7622 RTC - NXP PCF85363 - Spreadtrum SC27xx PMIC RTC Drivers updates: - Use generic nvmem to expose the Non volatile ram for ds1305, ds1511, m48t86 and omap - abx80x: solve possible race condition at probe - armada38x: support trimming the RTC oscillator - at91rm9200: fix reading the alarm value at boot - ds1511: allow waking platform - m41t80: rework square wave output - pcf8523: support trimming the RTC oscillator - pcf8563: fix clock output rate - pl031: make interrupt optional - xgene: fix suspend/resume" * tag 'rtc-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (50 commits) dt-bindings: rtc: imxdi: Improve the bindings text rtc: sc27xx: Add Spreadtrum SC27xx PMIC RTC driver dt-bindings: rtc: Add Spreadtrum SC27xx RTC documentation rtc: at91rm9200: fix reading alarm value rtc: at91rm9200: stop calculating yday in at91_rtc_readalarm rtc: sysfs: Use time64_t variables to set time/alarm rtc: xgene: mark PM functions as __maybe_unused rtc: xgene: Fix suspend/resume rtc: pcf8563: don't alway enable the alarm rtc: pcf8563: fix output clock rate rtc: rx8010: Fix for incorrect return value rtc: rx8010: Specify correct address for RX8010_RESV31 rtc: rx8010: Remove duplicate define rtc: m41t80: remove unneeded checks from m41t80_sqw_set_rate rtc: m41t80: avoid i2c read in m41t80_sqw_is_prepared rtc: m41t80: avoid i2c read in m41t80_sqw_recalc_rate rtc: m41t80: fix m41t80_sqw_round_rate return value rtc: m41t80: m41t80_sqw_set_rate should return 0 on success rtc: add support for NXP PCF85363 real-time clock rtc: omap: Support scratch registers ...
2017-11-21dt-bindings: rtc: imxdi: Improve the bindings textFabio Estevam1-7/+7
Improve the bindings text by doing the following changes: - Remove the i.MX53 reference, as the RTC on i.MX53 is a different hardware - Add 'clocks' to the list of required properties - Explain that the optional security violation irq is the second entry - Use the real unit address and irq numbers for i.MX25 Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Juergen Borleis <jbe@pengutronix.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-11-15dt-bindings: rtc: Add Spreadtrum SC27xx RTC documentationBaolin Wang1-0/+27
This patch adds the binding documentation for Spreadtrum SC27xx series RTC device. Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-11-10dt-bindings: Remove leading zeros from bindings notationMarco Franchi2-2/+2
Improve the binding example by removing all the leading zeros to fix the following dtc warnings: Warning (unit_address_format): Node /XXX unit name should not have leading 0s Converted using the following command: perl -p -i -e 's/\@0+([0-9a-f])/\@$1/g' `find ./Documentation/devicetree/bindings "*.txt"` Some unnecessary changes were manually fixed. Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-11-08rtc: add support for NXP PCF85363 real-time clockEric Nelson1-0/+17
Note that alarms are not currently implemented. 64 bytes of nvmem is supported and exposed in sysfs (# is the instance number, starting with 0): /sys/bus/nvmem/devices/pcf85363-#/nvmem Signed-off-by: Eric Nelson <eric@nelint.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Tested-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-10-26dt-bindings: rtc: mediatek: add bindings for MediaTek SoC based RTCSean Wang1-0/+21
Add device-tree binding for MediaTek SoC based RTC Cc: devicetree@vger.kernel.org Signed-off-by: Sean Wang <sean.wang@mediatek.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-10-06dt-bindings: rtc: merge ds1339 in ds1307 documentationAlexandre Belloni2-18/+8
Now that there is documentation for the ds1307 and compatible RTCs, merge the ds1339 documentation in it. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-10-06dt-bindings: rtc: Add bindings for m41t80 and compatiblesAlexandre Belloni1-0/+31
The ST M41T80 family of RTC are not trivial devices, document them. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-10-06dt-bindings: rtc: DS1307 and compatibles are not trivialAlexandre Belloni1-0/+36
Document optional properties for ds1307 and compatible RTCs Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-10-06dt-bindings: rtc: Add sirf,prima2-sysrtc bindingsAlexandre Belloni1-0/+13
Add device tree bindings for the SiRFSoC Real Time Clock. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-10-06dt-bindings: rtc: add stericsson,coh901331 bindingsAlexandre Belloni1-0/+17
Add device tree bindings for the ST-Ericsson COH 901 331 Real Time Clock Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-09-13Merge tag 'rtc-4.14' of ↵Linus Torvalds4-3/+35
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "Subsystem: - remove .open() and .release() RTC ops - constify i2c_device_id New driver: - Realtek RTD1295 - Android emulator (goldfish) RTC Drivers: - ds1307: Beginning of a huge cleanup - s35390a: handle invalid RTC time - sun6i: external oscillator gate support" * tag 'rtc-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (40 commits) rtc: ds1307: use octal permissions rtc: ds1307: fix braces rtc: ds1307: fix alignments and blank lines rtc: ds1307: use BIT rtc: ds1307: use u32 rtc: ds1307: use sizeof rtc: ds1307: remove regs member rtc: Add Realtek RTD1295 dt-bindings: rtc: Add Realtek RTD1295 rtc: sun6i: Add support for the external oscillator gate rtc: goldfish: Add RTC driver for Android emulator dt-bindings: Add device tree binding for Goldfish RTC driver rtc: ds1307: add basic support for ds1341 chip rtc: ds1307: remove member nvram_offset from struct ds1307 rtc: ds1307: factor out offset to struct chip_desc rtc: ds1307: factor out rtc_ops to struct chip_desc rtc: ds1307: factor out irq_handler to struct chip_desc rtc: ds1307: improve irq setup rtc: ds1307: constify struct chip_desc variables rtc: ds1307: improve trickle charger initialization ...
2017-09-05dt-bindings: Remove "status" from examplesRob Herring1-1/+0
Pretty much any node can have a status property, so it doesn't need to be in examples. Converted with the following command and removed examples with SoC and board specific splits: git grep -l -E 'status.*=.*' Documentation/devicetree/ | xargs sed -i -E '/\sstatus.*=.*"(disabled|ok|okay)/d' Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-09-05dt-bindings: rtc: Add Realtek RTD1295Andreas Färber1-0/+16
Add a binding for the RTC on the Realtek RTD119x/RTD129x SoC families. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-09-01rtc: sun6i: Add support for the external oscillator gateMaxime Ripard1-2/+2
The RTC can output its 32kHz clock outside of the SoC, for example to clock a WiFi chip. Create a new clock that other devices will be able to retrieve, while maintaining the DT stability by providing a default name for that clock if clock-output-names doesn't list one. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-09-01dt-bindings: Add device tree binding for Goldfish RTC driverAleksandar Markovic1-0/+17
Add documentation for DT binding of Goldfish RTC driver. The compatible string used by OS for binding the driver is "google,goldfish-rtc". Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com> Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com> Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-28 23:23:20 +0300