summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/clock
AgeCommit message (Collapse)AuthorFilesLines
2018-07-25dt-bindings: remove 'interrupt-parent' from bindingsRob Herring1-7/+0
'interrupt-parent' is often documented as part of define bindings, but it is really outside the scope of a device binding. It's never required in a given node as it is often inherited from a parent node. Or it can be implicit if a parent node is an 'interrupt-controller' node. So remove it from all the binding files. Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2018-06-16docs: Fix more broken referencesMauro Carvalho Chehab3-6/+6
As we move stuff around, some doc references are broken. Fix some of them via this script: ./scripts/documentation-file-ref-check --fix Manually checked that produced results are valid. Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Jonathan Corbet <corbet@lwn.net>
2018-06-12Merge tag 'armsoc-dt' of ↵Linus Torvalds1-5/+11
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC device tree updates from Olof Johansson: "As always, a large number of DT updates. Too many to enumerate them all, but at a glance: New SoCs introduced in this release: - Amlogic: + Meson 8M2 SoC, a.k.a. S812. A quad Cortex-A9 SoC used in some set top boxes and other products. - Mediatek: + MT7623A, which is a flavor of the MT7623 family with other on-chip ethernet options. - Qualcomm: + SDM845, a.k.a Snapdragon 845, an 4+4-core Kryo 385/845 (Cortex-A75/A55 derivative) SoC that's one of the current high-end mobile SoCs. It's great to see mainline support for it. So far, you can't do much with it, since a lot of peripherals are not yet in the DTs but driver support for USB, GPU and other pieces are starting to trickle in. This might end up being a well-supported SoC upstream if the momentum keeps up. - Renesas: + R8A77990, a.k.a R-Car E3, a new automotive entertainment-targeted SoC. Currently only one Cortex-A53 CPU is enabled, we are eagerly awaiting more. So far, basic drivers such as serial, gpios, PMU and ethernet are enabled. + R8A77470, a.k.a. RZ/G1C, a new dual Cortex-A7 SoC with PowerVR GPU. Same here, basic set of drivers such as serial, gpios and ethernet enabled, and SMP support is also forthcoming. - STMicroelectronics: + STM32F469, very similar tih STM32F429 but with display support Enhancements to SoCs/platforms (DTS contents, some driver portions might not be in yet): - Allwinner sun8i (h3/a33/a83t) SMP, DVFS tweaks, misc - Amlogic Meson: I2C, UFS, TDM, GPIO external interrupts, MMC resets - Hisilicon hi3660: Thermal cooling, CPU frequency scaling, mailbox interfaces - Marvell Berlin2CD: SMP support, thermal sensors - Mediatek MT7623: Highspeed DMA, audio support - Qualcomm IPQ8074 PCIe support, MSM8996 UFS support - Renesas: Watchdog and PMU support across many platforms - Rockchip RK3399: USB3 OTG support - Samsung Exynos: Audio-over-HDMI on Odroid X/X2/U3 - STMicro STM32: Lots of peripherals added to STM32MP175C - Uniphier: Ethernet support New boards: - Allwinner A20: Olimex A20-SOM-EVB-eMMC variant - Allwinner H2+: Libre Computer ALL-H3-CC (h2+ version) - Allwinner A33: Nintendo NES/SuperNES Classic Edition - Aspeed: S2600WF, Inventec Lanyang BMC, Portwell Neptune - Berlin2CD: Valve Steam Link - Broadcom BCM5301X: Luxul XAP-1610 and XWR-3150 V1 - Broadcom: Raspberry Pi 3 B+ - Mediatek MT7623N and MT7623A: reference boards - Meson 8M2: Tronsmart MXIII Plus - NXP i.MX: Engicam i.CoreM6, DHCOM iMX6 SOM, BTicino i.MX6DL Mamoj - Qualcomm MSM8974: Sony Xperia Z1 Compact support - Qualcomm SDM845: MTP development board - Renesas: Ebisu R8A77990 board - Renesas RZ/G1C: iwg23s: iWave G235-SDB - TI am335x: Pocketbeagle support" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (448 commits) ARM: dts: aspeed: Fix hwrng register address arm64: dts: sprd: whale2: Add the rtc enable clock for watchdog arm64: dts: sprd: Add GPIO and GPIO keys device nodes arm64: dts: sprd: fix typo in 'remote-endpoint' arm64: dts: apq8096-db820c: Removed bt-en-1-8v regulator arm64: dts: fix regulator property name for wlan pcie endpoint arm64: dts: qcom: msm8996: Use UFS_GDSC for UFS ARM: dts: pxa3xx: fix MMC clocks ARM: pxa: dts: add pin definitions for extended GPIOs ARM: pxa: dts: add gpio-ranges to gpio controller ARM: dts: ipq8074: Enable few peripherals for hk01 board ARM: dts: ipq8074: Add pcie nodes ARM: dts: ipq8074: Add peripheral nodes ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c2 board file ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c1 board file ARM: dts: ipq4019: Add ipq4019-ap.dk07.1 common data ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk04.1-c3 board file ARM: dts: ipq4019: Add ipq4019-ap.dk04.1-c1 board file ARM: dts: ipq4019: Add ipq4019-ap.dk04.dtsi ARM: dts: ipq4019: Change the max opp frequency ...
2018-06-04Merge branches 'clk-davinci-psc-da830', 'clk-renesas', 'clk-at91-recalc', ↵Stephen Boyd2-3/+8
'clk-davinci' and 'clk-meson' into clk-next * clk-davinci-psc-da830: clk: davinci: psc-da830: fix USB0 48MHz PHY clock registration * clk-renesas: clk: renesas: cpg-mssr: Add support for R-Car E3 clk: renesas: Add r8a77990 CPG Core Clock Definitions clk: renesas: rcar-gen2: Centralize quirks handling clk: renesas: r8a77980: Correct parent clock of PCIEC0 clk: renesas: r8a7794: Fix LB clock divider clk: renesas: r8a7792: Fix LB clock divider clk: renesas: r8a7791/r8a7793: Fix LB clock divider clk: renesas: r8a7745: Fix LB clock divider clk: renesas: r8a7743: Fix LB clock divider clk: renesas: cpg-mssr: Add r8a77470 support clk: renesas: Add r8a77470 CPG Core Clock Definitions clk: renesas: r8a77965: Add MSIOF controller clocks * clk-at91-recalc: clk: at91: PLL recalc_rate() now using cached MUL and DIV values * clk-davinci: clk: davinci: Fix link errors when not all SoCs are enabled clk: davinci: psc: allow for dev == NULL clk: davinci: da850-pll: change PLL0 to CLK_OF_DECLARE clk: davinci: pll: allow dev == NULL clk: davinci: psc-dm365: fix few clocks clk: davinci: pll-dm646x: keep PLL2 SYSCLK1 always enabled clk: davinci: psc-dm355: fix ASP0/1 clkdev lookups clk: davinci: pll-dm355: fix SYSCLKn parent names clk: davinci: pll-dm355: drop pll2_sysclk2 * clk-meson: clk: meson: axg: let mpll clocks round closest clk: meson: mpll: add round closest support clk: meson: meson8b: mark fclk_div2 gate clocks as CLK_IS_CRITICAL clk: meson: use SPDX license identifiers consistently clk: meson: drop CLK_SET_RATE_PARENT flag clk: meson-axg: Add AO Clock and Reset controller driver clk: meson: aoclk: refactor common code into dedicated file clk: meson: migrate to devm_of_clk_add_hw_provider API clk: meson: gxbb: add the video decoder clocks clk: meson: meson8b: add support for the NAND clocks dt-bindings: clock: reset: Add AXG AO Clock and Reset Bindings dt-bindings: clock: axg-aoclkc: New binding for Meson-AXG SoC clk: meson: gxbb: expose VDEC_1 and VDEC_HEVC clocks dt-bindings: clock: meson8b: export the NAND clock
2018-06-04Merge branch 'clk-qcom-sdm845' into clk-nextStephen Boyd2-0/+20
* clk-qcom-sdm845: clk: qcom: Export clk_fabia_pll_configure() clk: qcom: Add video clock controller driver for SDM845 dt-bindings: clock: Introduce QCOM Video clock bindings clk: qcom: Add Global Clock controller (GCC) driver for SDM845 clk: qcom: Add DT bindings for SDM845 gcc clock controller clk: qcom: Configure the RCGs to a safe source as needed clk: qcom: Add support for BRANCH_HALT_SKIP flag for branch clocks clk: qcom: Simplify gdsc status checking logic clk: qcom: gdsc: Add support to poll CFG register to check GDSC state clk: qcom: gdsc: Add support to poll for higher timeout value clk: qcom: gdsc: Add support to reset AON and block reset logic clk: qcom: Add support for controlling Fabia PLL clk: qcom: Clear hardware clock control bit of RCG Also fixup the Kconfig mess where SDM845 GCC has msm8998 in the description and also the video Kconfig says things slightly differently from the GCC one so just make it the same.
2018-06-04Merge branches 'clk-match-string', 'clk-ingenic', 'clk-si544-round-fix' and ↵Stephen Boyd1-12/+14
'clk-bcm-stingray' into clk-next * clk-match-string: clk: use match_string() helper clk: bcm2835: use match_string() helper * clk-ingenic: clk: ingenic: jz4770: Add 150us delay after enabling VPU clock clk: ingenic: jz4770: Enable power of AHB1 bus after ungating VPU clock clk: ingenic: jz4770: Modify C1CLK clock to disable CPU clock stop on idle clk: ingenic: jz4770: Change OTG from custom to standard gated clock clk: ingenic: Support specifying "wait for clock stable" delay clk: ingenic: Add support for clocks whose gate bit is inverted * clk-si544-round-fix: clk-si544: Properly round requested frequency to nearest match * clk-bcm-stingray: clk: bcm: Update and add Stingray clock entries dt-bindings: clk: Update Stingray binding doc
2018-06-04Merge branches 'clk-allwinner', 'clk-rockchip', 'clk-tegra', 'clk-berlin' ↵Stephen Boyd2-78/+2
and 'clk-qcom-mmagic' into clk-next * clk-allwinner: clk: sunxi-ng: r40: export a regmap to access the GMAC register clk: sunxi-ng: r40: rewrite init code to a platform driver clk: sunxi-ng: add support for H6 PRCM CCU * clk-rockchip: clk: rockchip: remove deprecated gate-clk code and dt-binding clk: rockchip: use match_string() helper * clk-tegra: clk: tegra: Add quirk for getting CDEV1/2 clocks on Tegra20 clk: tegra20: Correct parents of CDEV1/2 clocks clk: tegra20: Add DEV1/DEV2 OSC dividers * clk-berlin: clk: berlin: switch to SPDX license identifier * clk-qcom-mmagic: clk: qcom: mmcc-msm8996: leave all mmagic gdscs and clocks always enabled clk: qcom: Register the gdscs before the clocks clk: qcom: gdsc: Add support for ALWAYS_ON gdscs
2018-06-04Merge branches 'clk-qcom-rpmh', 'clk-npcm7xx', 'clk-of-parent-count' and ↵Stephen Boyd2-0/+122
'clk-qcom-rcg-fix' into clk-next * clk-qcom-rpmh: dt-bindings: clock: Introduce QCOM RPMh clock bindings * clk-npcm7xx: clk: npcm7xx: fix return value check in npcm7xx_clk_init() clk: npcm7xx: add clock controller dt-binding: clk: npcm750: Add binding for Nuvoton NPCM7XX Clock * clk-of-parent-count: pinctrl: sunxi: Use of_clk_get_parent_count() instead of open coding soc/tegra: pmc: Use of_clk_get_parent_count() instead of open coding soc: rockchip: power-domain: Use of_clk_get_parent_count() instead of open coding ARM: timer-sp: Use of_clk_get_parent_count() instead of open coding clk: Extract OF clock helpers in <linux/of_clk.h> * clk-qcom-rcg-fix: clk: qcom: Base rcg parent rate off plan frequency
2018-06-04Merge branch 'clk-actions' into clk-nextStephen Boyd1-0/+47
* clk-actions: clk: actions: Add S900 SoC clock support clk: actions: Add pll clock support clk: actions: Add composite clock support clk: actions: Add fixed factor clock support clk: actions: Add factor clock support clk: actions: Add divider clock support clk: actions: Add mux clock support clk: actions: Add gate clock support clk: actions: Add common clock driver support dt-bindings: clock: Add Actions S900 clock bindings
2018-06-02dt-bindings: clk: Update Stingray binding docPramod Kumar1-12/+14
Update Stingray clock binding document to add additional clock entries with names matching the latest ASIC datasheet. Also modify a few existing entries to make their naming more consistent with the rest of the entries Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com> Signed-off-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-06-01dt-bindings: clock: Introduce QCOM Video clock bindingsAmit Nischal1-0/+19
Add device tree bindings for video clock controller for Qualcomm Technology Inc's SoCs. Signed-off-by: Amit Nischal <anischal@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-05-23Merge tag 'for-kevin-meson-clk-bindings-v4.18-1' of ↵Kevin Hilman1-0/+1
https://github.com/BayLibre/clk-meson into v4.18/dt64 First round of binding update for meson clocks targeted at v4.18 # gpg: Signature made Wed May 16 01:23:15 2018 PDT # gpg: using RSA key F4E159AE18F3F56D5F1BB71BE6FC0F1C37F2DA85 # gpg: Can't check signature: No public key * tag 'for-kevin-meson-clk-bindings-v4.18-1' of https://github.com/BayLibre/clk-meson: dt-bindings: clock: reset: Add AXG AO Clock and Reset Bindings dt-bindings: clock: axg-aoclkc: New binding for Meson-AXG SoC clk: meson: gxbb: expose VDEC_1 and VDEC_HEVC clocks dt-bindings: clock: meson8b: export the NAND clock
2018-05-23clk: rockchip: remove deprecated gate-clk code and dt-bindingHeiko Stuebner1-77/+0
Initially we tried modeling clocks via the devicetree before switching to clocks declared in the clock drivers and only exporting specific ids to the devicetree. As the old code was in the kernel for 1-2 releases when the new mode of operation was added we kept it for backwards compatibility. That deprecation notice is in the binding since july 2014, so nearly 4 years now and I think it's time to drop the old cruft. Especially as at the time using the mainline kernel on Rockchip devices was not really possible, except for experiments on the really old socs of the rk3066 + rk3188 line, so there shouldn't be any devicetrees still around that rely on that code. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org>
2018-05-15dt-bindings: clock: axg-aoclkc: New binding for Meson-AXG SoCYixun Lan1-0/+1
Update the dt-binding documentation to support new compatible string for the Amlogic's Meson-AXG SoC. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-05-09clk: renesas: cpg-mssr: Add support for R-Car E3Yoshihiro Shimoda1-1/+2
Initial support for R-Car E3 (r8a77990), including core and module clocks. Based on the Table 8.2g of "R-Car Series, 3rd Generation User's Manual: Hardware ((Rev. 0.80, Oct 31, 2017) with Manual Errata on Feb. 28, 2018". Inspried by patches by Takeshi Kihara in the BSP. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-05-08clk: qcom: Add DT bindings for SDM845 gcc clock controllerAmit Nischal1-0/+1
Add compatible string and the include file for gcc clock controller for SDM845. Signed-off-by: Amit Nischal <anischal@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-05-04clk: sunxi-ng: add support for H6 PRCM CCUIcenowy Zheng1-1/+2
The H6 has clock/reset controls in PRCM part, like old SoCs such as H3 and A64. However, the PRCM CCU is rearranged; the register arragement is now similar to the main CCU of H6, and the PRCM now has two APB buses to control -- one is clocked from AHB clock derivde from AR100 clock, the other is clocked from the same mux with AR100 clock. Therefore a new driver is written for it. As there's no official document about the PRCM in H6, all the information are indirectly collected from BSP and parts of the document, and the information source is noted as comments in the driver's source code. If reliable information is provided furtherly, the driver needs to be rechecked. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-05-02dt-bindings: clock: Introduce QCOM RPMh clock bindingsTaniya Das1-0/+22
Add RPMh clock device bindings for Qualcomm Technology Inc's SoCs. These devices would be used for communicating resource state requests to control the clocks managed by RPMh. Signed-off-by: Taniya Das <tdas@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-19dt-bindings: clock: meson: update documentation with hhi sysconJerome Brunet1-5/+11
The HHI register region hosts more than just clocks and needs to accessed drivers other than the clock controller, such as the display driver. This register region should be managed by syscon. It is already the case on gxbb/gxl and it soon will be on axg. The clock controllers must use this system controller instead of directly mapping the registers. This changes the bindings of gxbb and axg's clock controllers. This is due to an initial 'incomplete' knowledge of these SoCs, which is why the meson bindings are unstable ATM. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-04-17clk: qcom: Add MSM8998 Global Clock Control (GCC) driverJoonwoo Park1-0/+1
Add support for the global clock controller found on MSM8998 based devices. This should allow most non-multimedia device drivers to probe and control their clocks. Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org> Signed-off-by: Imran Khan <kimran@codeaurora.org> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> [bjorn: Specify regs for alpha_plls, fix white spaces and add binding] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-16clk: renesas: cpg-mssr: Add r8a77470 supportBiju Das1-3/+6
Add RZ/G1C (R8A77470) Clock Pulse Generator / Module Standby and Software Reset support. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-04-06Merge branches 'clk-stratix10', 'clk-imx', 'clk-bcm', 'clk-cs2000' and ↵Stephen Boyd2-0/+56
'clk-imx6sll' into clk-next * clk-stratix10: clk: socfpga: stratix10: add clock driver for Stratix10 platform dt-bindings: documentation: add clock bindings information for Stratix10 * clk-imx: clk: imx7d: Move clks_init_on before any clock operations clk: imx7d: Correct ahb clk parent select clk: imx7d: Correct dram pll type clk: imx7d: Add USB clock information clk: imx: pllv2: avoid using uninitialized values clk: imx6ull: Add epdc_podf instead of sim_podf clk: imx: imx7d: correct video pll clock tree clk: imx: imx7d: add the Keypad Port module clock clk: imx7d: add CAAM clock clk: imx: imx7d: add the snvs clock clk: imx: imx6sx: update cko mux options * clk-bcm: clk: bcm2835: De-assert/assert PLL reset signal when appropriate * clk-cs2000: clk: cs2000: set pm_ops in hibernate-compatible way * clk-imx6sll: clk: imx: add clock driver for imx6sll dt-bindings: imx: update clock doc for imx6sll clk: imx: add new gate/gate2 wrapper funtion clk: imx: Add CLK_IS_CRITICAL flag for busy divider and busy mux
2018-04-06Merge branches 'clk-davinci', 'clk-si544', 'clk-rockchip', 'clk-uniphier' ↵Stephen Boyd5-0/+286
and 'clk-ti-flag-fix' into clk-next * clk-davinci: clk: davinci: Remove redundant dev_err calls clk: davinci: cfgchip: Add TI DA8XX USB PHY clocks clk: davinci: New driver for TI DA8XX CFGCHIP clocks dt-bindings: clock: Add bindings for DA8XX CFGCHIP clocks clk: davinci: Add platform information for TI DM646x PSC clk: davinci: Add platform information for TI DM644x PSC clk: davinci: Add platform information for TI DM365 PSC clk: davinci: Add platform information for TI DM355 PSC clk: davinci: Add platform information for TI DA850 PSC clk: davinci: Add platform information for TI DA830 PSC clk: davinci: New driver for davinci PSC clocks dt-bindings: clock: New bindings for TI Davinci PSC clk: davinci: Add platform information for TI DM646x PLL clk: davinci: Add platform information for TI DM644x PLL clk: davinci: Add platform information for TI DM365 PLL clk: davinci: Add platform information for TI DM355 PLL clk: davinci: Add platform information for TI DA850 PLL clk: davinci: Add platform information for TI DA830 PLL clk: davinci: New driver for davinci PLL clocks dt-bindings: clock: Add new bindings for TI Davinci PLL clocks * clk-si544: clk: Add driver for the si544 clock generator chip * clk-rockchip: clk: rockchip: assign correct id for pclk_ddr and hclk_sd in rk3399 clk: rockchip: Fix error return in phase clock registration clk: rockchip: Correct the behaviour of restoring cached phase clk: rockchip: Fix wrong parents for MMC phase clock for rk3328 clk: rockchip: Fix wrong parent for SDMMC phase clock for rk3228 clk: rockchip: Add 1.6GHz PLL rate for rk3399 clk: rockchip: Restore the clock phase after the rate was changed clk: rockchip: Prevent calculating mmc phase if clock rate is zero clk: rockchip: Free the memory on the error path clk: rockchip: document hdmi_phy external input for rk3328 clk: rockchip: add flags for rk3328 dclk_lcdc clk: rockchip: remove ignore_unused flag from rk3328 vio_h2p clocks clk: rockchip: protect all remaining rk3328 interconnect clocks clk: rockchip: export sclk_hdmi_sfc on rk3328 clk: rockchip: remove HCLK_VIO from rk3328 dt header clk: rockchip: fix hclk_vio_niu on rk3328 * clk-uniphier: clk: uniphier: add additional ethernet clock lines for Pro4 clk: uniphier: add SATA clock control support clk: uniphier: add PCIe clock control support clk: uniphier: add ethernet clock control support for PXs3 clk: uniphier: add Pro4/Pro5/PXs2 audio system clock * clk-ti-flag-fix: clk: ti: fix flag space conflict with clkctrl clocks clk: ti: clkctrl: add support for CLK_SET_RATE_PARENT flag
2018-04-06Merge branches 'clk-mediatek', 'clk-hisi', 'clk-allwinner', 'clk-ux500' and ↵Stephen Boyd2-2/+8
'clk-renesas' into clk-next * clk-mediatek: clk: mediatek: add audsys support for MT2701 clk: mediatek: add devm_of_platform_populate() for MT7622 audsys dt-bindings: clock: mediatek: add audsys support for MT2701 dt-bindings: clock: mediatek: update audsys documentation to adapt MFD device clk: mediatek: update missing clock data for MT7622 audsys clk: mediatek: fix PWM clock source by adding a fixed-factor clock dt-bindings: clock: mediatek: add binding for fixed-factor clock axisel_d4 * clk-hisi: clk: hisilicon: fix potential NULL dereference in hisi_clk_alloc() clk: hisilicon: mark wdt_mux_p[] as const clk: hisilicon: Mark phase_ops static clk: hi3798cv200: add emmc sample and drive clock clk: hisilicon: add hisi phase clock support clk: hi3798cv200: add COMBPHY0 clock support clk: hi3798cv200: fix define indentation clk: hi3798cv200: add support for HISTB_USB2_OTG_UTMI_CLK clk: hi3798cv200: correct IR clock parent clk: hi3798cv200: fix unregister call sequence in error path * clk-allwinner: clk: sunxi-ng: add missing hdmi-slow clock for H6 CCU clk: sunxi-ng: add support for the Allwinner H6 CCU dt-bindings: add device tree binding for Allwinner H6 main CCU clk: sunxi-ng: Support fixed post-dividers on NKMP style clocks clk: sunxi-ng: h3: h5: export CLK_PLL_VIDEO clk: sunxi-ng: h3: h5: Allow some clocks to set parent rate clk: sunxi-ng: h3: h5: Add minimal rate for video PLL clk: sunxi-ng: Add check for minimal rate to NM PLLs clk: sunxi-ng: Use u64 for calculation of nkmp rate clk: sunxi-ng: Mask nkmp factors when setting register clk: sunxi-ng: remove select on obsolete SUNXI_CCU_X kconfig name * clk-ux500: clk: ux500: Drop AB8540/9540 support * clk-renesas: (27 commits) clk: renesas: cpg-mssr: Adjust r8a77980 ifdef clk: renesas: rcar-gen3: Always use readl()/writel() clk: renesas: sh73a0: Always use readl()/writel() clk: renesas: rza1: Always use readl()/writel() clk: renesas: rcar-gen2: Always use readl()/writel() clk: renesas: r8a7740: Always use readl()/writel() clk: renesas: r8a73a4: Always use readl()/writel() clk: renesas: mstp: Always use readl()/writel() clk: renesas: div6: Always use readl()/writel() clk: fix false-positive Wmaybe-uninitialized warning clk: renesas: r8a77965: Replace DU2 clock clk: renesas: cpg-mssr: Add support for R-Car M3-N clk: renesas: cpg-mssr: add R8A77980 support dt-bindings: clock: add R8A77980 CPG core clock definitions clk: renesas: r8a7792: Add rwdt clock clk: renesas: r8a7794: Add rwdt clock clk: renesas: r8a7791/r8a7793: Add rwdt clock clk: renesas: r8a7790: Add rwdt clock clk: renesas: r8a7745: Add rwdt clock clk: renesas: r8a7743: Add rwdt clock ...
2018-04-06Merge branches 'clk-spreadtrum', 'clk-stm32f', 'clk-stm32mp1', 'clk-hi655x' ↵Stephen Boyd1-0/+60
and 'clk-gpio' into clk-next * clk-spreadtrum: clk: sprd: add RTC gate for SC9860 dt-bindings: clocks: add APB RTC gate for SC9860 * clk-stm32f: clk: stm32: Add clk entry for SDMMC2 on stm32F769 clk: stm32: Add DSI clock for STM32F469 Board clk: stm32: END_PRIMARY_CLK should be declare after CLK_SYSCLK * clk-stm32mp1: clk: stm32: add configuration flags for each of the stm32 drivers clk: stm32mp1: add Debug clocks clk: stm32mp1: add MCO clocks clk: stm32mp1: add RTC clock clk: stm32mp1: add Peripheral & Kernel Clocks clk: stm32mp1: add Kernel timers clk: stm32mp1: add Sub System clocks clk: stm32mp1: add Post-dividers for PLL clk: stm32mp1: add PLL clocks clk: stm32mp1: add Source Clocks for PLLs clk: stm32mp1: add MP1 gate for hse/hsi/csi oscillators clk: stm32mp1: Introduce STM32MP1 clock driver dt-bindings: Document STM32MP1 Reset Clock Controller (RCC) bindings * clk-hi655x: clk: enable hi655x common clk automatically * clk-gpio: clk: clk-gpio: Allow GPIO to sleep in set/get_parent
2018-04-06dt-bindings: imx: update clock doc for imx6sllBai Ping1-0/+36
Add clock binding doc update for imx6sll. Signed-off-by: Bai Ping <ping.bai@nxp.com> Acked-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-06dt-bindings: documentation: add clock bindings information for Stratix10Dinh Nguyen1-0/+20
Document that Stratix10 clock bindings, and add the clock header file. The clock header is an enumeration of all the different clocks on the Stratix10 platform. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-23dt-binding: clk: npcm750: Add binding for Nuvoton NPCM7XX ClockTali Perry1-0/+100
* Nuvoton NPCM7XX Clock Controller Nuvoton Poleg BMC NPCM7XX contains an integrated clock controller, which generates and supplies clocks to all modules within the BMC. Signed-off-by: Tali Perry <tali.perry1@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-23clk: Add driver for the si544 clock generator chipMike Looijmans1-0/+25
This patch adds the driver and devicetree documentation for the Silicon Labs SI544 clock generator chip. This is an I2C controlled oscillator capable of generating clock signals ranging from 200kHz to 1500MHz. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> [sboyd: assign max_freq to 0 in is_valid_frequency() to squelch warning] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-20dt-bindings: clock: Add bindings for DA8XX CFGCHIP clocksDavid Lechner1-0/+93
This adds a new binding for the clocks present in the CFGCHIP syscon registers in TI DA8XX SoCs. Signed-off-by: David Lechner <david@lechnology.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-20dt-bindings: clock: New bindings for TI Davinci PSCDavid Lechner1-0/+71
This adds a new binding for the Power Sleep Controller (PSC) for the mach-davinci family of processors. Note: Although TI Keystone has a very similar PSC, we are not using the existing bindings. Keystone is using a legacy one-node-per-clock binding (actually two nodes if you count the separate reset binding for the same IP block). Also, some davinci LPSCs have quirks that aren't handled by the keystone bindings, so we would be adding one compatible string per clock with quirks instead of just a new compatible string for each controller. Signed-off-by: David Lechner <david@lechnology.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-20dt-bindings: clock: Add new bindings for TI Davinci PLL clocksDavid Lechner1-0/+96
This adds a new binding for the PLL IP blocks in the mach-davinci family of processors. Currently, only da850 has device tree support but these bindings can also work for other SoCs in this family just by adding new compatible strings. Note: Although these PLL controllers are very similar to the TI Keystone SoCs, we are not re-using those bindings. The Keystone bindings use a legacy one-node-per-clock binding. Furthermore, the mach-davinici SoCs have a slightly different PLL register layout and a number of quirks that can't be handled by the existing bindings, so the keystone bindings could not be used as-is anyway. Signed-off-by: David Lechner <david@lechnology.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-20dt-bindings: clock: Add Actions S900 clock bindingsManivannan Sadhasivam1-0/+47
Add Actions Semi S900 clock bindings. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-18dt-bindings: add device tree binding for Allwinner H6 main CCUIcenowy Zheng1-0/+4
The Allwinner H6 main CCU uses the internal oscillator of the SoC, which is different with old SoCs' main CCU. Add device tree binding for the Allwinner H6 main CCU. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-12dt-bindings: Document STM32MP1 Reset Clock Controller (RCC) bindingsGabriel Fernandez1-0/+60
The RCC block is responsible of the management of the clock and reset generation for the complete circuit. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2018-03-08dt-bindings: clock: ti: add latching support to mux and divider clocksTero Kristo2-0/+6
Certain hardware configurations, like dra76x, have some of the clock registers partitioned in a funky manner that requires the clock control setup to be latched for PRCM to be notified of the change. This is accomplished with a separate control bit under the register. Add support for this clock latching support to divider and mux clocks. Signed-off-by: Tero Kristo <t-kristo@ti.com> Reviewed-by: Rob Herring <robh@kernel.org>
2018-02-26clk: renesas: cpg-mssr: Add support for R-Car M3-NJacopo Mondi1-2/+3
Initial support for R-Car M3-N (r8a77965), including core and module clocks. Based on Table 8.2d of "R-Car Series, 3rd Generation User's Manual: Hardware (Rev. 0.80, Oct 31, 2017)". Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-02-20clk: renesas: cpg-mssr: add R8A77980 supportSergei Shtylyov1-2/+3
Add R-Car V3H (R8A77980) Clock Pulse Generator / Module Standby and Software Reset support, using the CPG/MSSR driver core and the common R-Car Gen3 code. Based on the original (and large) patch by Vladimir Barinov. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-02-12clk: rockchip: document hdmi_phy external input for rk3328Heiko Stuebner1-0/+1
The hdmi-phy block inside the soc also loops its pll output back into the clock controller, so document that already used input clock. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Rob Herring <robh@kernel.org>
2018-02-02Merge tag 'clk-for-linus' of ↵Linus Torvalds7-2/+155
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "The core framework has a handful of patches this time around, mostly due to the clk rate protection support added by Jerome Brunet. This feature will allow consumers to lock in a certain rate on the output of a clk so that things like audio playback don't hear pops when the clk frequency changes due to shared parent clks changing rates. Currently the clk API doesn't guarantee the rate of a clk stays at the rate you request after clk_set_rate() is called, so this new API will allow drivers to express that requirement. Beyond this, the core got some debugfs pretty printing patches and a couple minor non-critical fixes. Looking outside of the core framework diff we have some new driver additions and the removal of a legacy TI clk driver. Both of these hit high in the dirstat. Also, the removal of the asm-generic/clkdev.h file causes small one-liners in all the architecture Kbuild files. Overall, the driver diff seems to be the normal stuff that comes all the time to fix little problems here and there and to support new hardware. Summary: Core: - Clk rate protection - Symbolic clk flags in debugfs output - Clk registration enabled clks while doing bookkeeping updates New Drivers: - Spreadtrum SC9860 - HiSilicon hi3660 stub - Qualcomm A53 PLL, SPMI clkdiv, and MSM8916 APCS - Amlogic Meson-AXG - ASPEED BMC Removed Drivers: - TI OMAP 3xxx legacy clk (non-DT) support - asm*/clkdev.h got removed (not really a driver) Updates: - Renesas FDP1-0 module clock on R-Car M3-W - Renesas LVDS module clock on R-Car V3M - Misc fixes to pr_err() prints - Qualcomm MSM8916 audio fixes - Qualcomm IPQ8074 rounded out support for more peripherals - Qualcomm Alpha PLL variants - Divider code was using container_of() on bad pointers - Allwinner DE2 clks on H3 - Amlogic minor data fixes and dropping of CLK_IGNORE_UNUSED - Mediatek clk driver compile test support - AT91 PMC clk suspend/resume restoration support - PLL issues fixed on si5351 - Broadcom IProc PLL calculation updates - DVFS support for Armada mvebu CPU clks - Allwinner fixed post-divider support - TI clkctrl fixes and support for newer SoCs" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (125 commits) clk: aspeed: Handle inverse polarity of USB port 1 clock gate clk: aspeed: Fix return value check in aspeed_cc_init() clk: aspeed: Add reset controller clk: aspeed: Register gated clocks clk: aspeed: Add platform driver and register PLLs clk: aspeed: Register core clocks clk: Add clock driver for ASPEED BMC SoCs clk: mediatek: adjust dependency of reset.c to avoid unexpectedly being built clk: fix reentrancy of clk_enable() on UP systems clk: meson-axg: fix potential NULL dereference in axg_clkc_probe() clk: Simplify debugfs registration clk: Fix debugfs_create_*() usage clk: Show symbolic clock flags in debugfs clk: renesas: r8a7796: Add FDP clock clk: Move __clk_{get,put}() into private clk.h API clk: sunxi: Use CLK_IS_CRITICAL flag for critical clks clk: Improve flags doc for of_clk_detect_critical() arch: Remove clkdev.h asm-generic from Kbuild clk: sunxi-ng: a83t: Add M divider to TCON1 clock clk: Prepare to remove asm-generic/clkdev.h ...
2018-02-02Merge tag 'armsoc-dt' of ↵Linus Torvalds1-2/+5
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC device tree updates from Arnd Bergmann: "We get a moderate number of new machines this time, and only one new SoC variant (Actions S700): Actions: - S700 Soc and CubieBoard7 development board - Allo.com Sparky Single-board-computer Allwinner: - Orange Pi R1 development board - Libre Computer Board ALL-H3-CC H3 single-board computer ASpeed ast2x00: - Witherspoon: OpenPower Power9 server manufactured by IBM that uses the ASPEED ast2500 - Zaius: OpenPower Power9 server manufactured by Invatech that uses the ASPEED ast2500 - Q71L: Intel Xeon server manufactured by Qanta that uses the ASPEED ast2400 AT91: - Axentia Nattis/Natte digital signage - sama5d2 PTC-ek Evaluation board Freescale/NXP i.MX: - SolidRun Humminboard2 development board - Variscite DART-MX6 SoM and Carrier-board - Technologic TS-4600 and TS-7970 development board - Toradex Colibri iMX7D SoM board - v1.5 variant of Solidrun Cubox-i and Hummingboard Freescale/NXP Layerscape: - Moxa UC-8410A Series industrial computer Gemini: - D-Link DNS-313 NAS enclosure OMAP: - LogicPD OMAP35xx SOM-LV devkit - LogicPD OMAP35xx Torpedo devkit Renesas: - r8a77970 (V3M) Starter Kit board - r8a7795 (M3-W) Salvator-XS board We finally managed to get the dtc warnings under control, with no more build-time warnings for bad device tree files. This includes fixes for the majority of platforms, including nomadik, samsung, lpc32xx, STi, spear, mediatek, freescale, qcom, realview, keystone, omap, kirkwood, renesas, hisilicon, and broadcom. Files get rearranged on a few platforms, in particular the Marvell Armada 7K/8K device tree files are changed in preparation for future SoC support, based on more than two of the same chips in one package, and some boards get renamed for oxnas for consistency. Finally, many existing SoCs gain descriptions for additional on-chip devices that we can now support with kernel drivers: - Allwinner A83t (drm, ethernet, i2c, ...), H3/H5 (USB-OTG) - Amlogic AXG family (clk, pinctrl, pwm, ...), and others (vpu, hdmi) - Aspeed clk controller support - Freescale LS1088A, LS1021A device support - Gemini Ethernet, PCI, TVE, panel - Keystone gpio, qspi, more uarts - Mediatek cpufreq, regulator, clock, reset - Marvell thermal, cpufreq, nand - Renesas SMP, thermal, timer, PWM, sound, phy, ipmmu - Rockchip Mipi, GPU, display - Samsung Exynos5433 PMU, power domain, nfc - Spreadtrum: sc9860 clocks - Tegra TX2 PSDI, HDMI, I2C,SMMU, display, fuse, ..." * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (690 commits) arm64: dts: stratix10: fix SPI settings ARM: dts: socfpga: add i2c reset signals arm64: dts: stratix10: add USB ECC reset bit arm64: dts: stratix10: enable USB on the devkit ARM: dts: socfpga: disable over-current for Arria10 USB devkit ARM: dts: Nokia N9: add support for up/down keys in the dts ARM: dts: nomadik: add interrupt-parent for clcd ARM: dts: Add ethernet to a bunch of platforms ARM: dts: Add ethernet to the Gemini SoC ARM: dts: rename oxnas dts files ARM: dts: s5pv210: add interrupt-parent for ohci ARM: lpc3250: fix uda1380 gpio numbers ARM: dts: STi: Add gpio polarity for "hdmi,hpd-gpio" property ARM: dts: dra7: Reduce shut down temperature of non-cpu thermal zones ARM: dts: n900: Add aliases for lcd and tvout displays ARM: dts: Update ti-sysc data for existing users ARM: dts: Fix smartreflex compatible for omap3 shared mpu-iva instance arm64: dts: marvell: armada-80x0: Fix pinctrl compatible string arm: spear13xx: Fix spics gpio controller's warning arm: spear13xx: Fix dmas cells ...
2018-01-27Merge branches 'clk-aspeed', 'clk-lock-UP', 'clk-mediatek' and ↵Stephen Boyd1-2/+3
'clk-allwinner' into clk-next * clk-aspeed: clk: aspeed: Handle inverse polarity of USB port 1 clock gate clk: aspeed: Fix return value check in aspeed_cc_init() clk: aspeed: Add reset controller clk: aspeed: Register gated clocks clk: aspeed: Add platform driver and register PLLs clk: aspeed: Register core clocks clk: Add clock driver for ASPEED BMC SoCs dt-bindings: clock: Add ASPEED constants * clk-lock-UP: clk: fix reentrancy of clk_enable() on UP systems * clk-mediatek: clk: mediatek: adjust dependency of reset.c to avoid unexpectedly being built clk: mediatek: Fix all warnings for missing struct clk_onecell_data clk: mediatek: fixup test-building of MediaTek clock drivers clk: mediatek: group drivers under indpendent menu * clk-allwinner: clk: sunxi-ng: a83t: Add M divider to TCON1 clock clk: sunxi-ng: fix the A64/H5 clock description of DE2 CCU clk: sunxi-ng: add support for Allwinner H3 DE2 CCU dt-bindings: fix the binding of Allwinner DE2 CCU of A83T and H3 clk: sunxi-ng: sun8i: a83t: Use sigma-delta modulation for audio PLL clk: sunxi-ng: sun8i: a83t: Add /2 fixed post divider to audio PLL clk: sunxi-ng: Support fixed post-dividers on NM style clocks clk: sunxi-ng: sun50i: a64: Add 2x fixed post-divider to MMC module clocks clk: sunxi-ng: Support fixed post-dividers on MP style clocks clk: sunxi: Use PTR_ERR_OR_ZERO()
2018-01-27Merge branches 'clk-remove-asm-clkdev', 'clk-debugfs-fixes', 'clk-renesas' ↵Stephen Boyd1-2/+5
and 'clk-meson' into clk-next * clk-remove-asm-clkdev: clk: Move __clk_{get,put}() into private clk.h API clk: sunxi: Use CLK_IS_CRITICAL flag for critical clks arch: Remove clkdev.h asm-generic from Kbuild clk: Prepare to remove asm-generic/clkdev.h blackfin: Use generic clkdev.h header * clk-debugfs-fixes: clk: Simplify debugfs registration clk: Fix debugfs_create_*() usage clk: Show symbolic clock flags in debugfs clk: Improve flags doc for of_clk_detect_critical() * clk-renesas: clk: renesas: r8a7796: Add FDP clock clk: renesas: cpg-mssr: Keep wakeup sources active during system suspend clk: renesas: mstp: Keep wakeup sources active during system suspend clk: renesas: r8a77970: Add LVDS clock * clk-meson: clk: meson-axg: fix potential NULL dereference in axg_clkc_probe() clk: meson-axg: make local symbol axg_gp0_params_table static clk: meson-axg: fix return value check in axg_clkc_probe() clk: meson: mpll: use 64-bit maths in params_from_rate clk: meson-axg: add clock controller drivers clk: meson-axg: add clocks dt-bindings required header dt-bindings: clock: add compatible variant for the Meson-AXG clk: meson: make the spinlock naming more specific clk: meson: gxbb: remove IGNORE_UNUSED from mmc clocks clk: meson: gxbb: fix wrong clock for SARADC/SANA
2018-01-27Merge branches 'clk-iproc', 'clk-mvebu' and 'clk-qcom-a53' into clk-nextStephen Boyd1-0/+22
* clk-iproc: clk: iproc: Minor tidy up of iproc pll data structures clk: iproc: Allow plls to do minor rate changes without reset clk: iproc: Fix error in the pll post divider rate calculation clk: iproc: Allow iproc pll to runtime calculate vco parameters * clk-mvebu: clk: mvebu: armada-37xx-periph: Use PTR_ERR_OR_ZERO() * clk-qcom-a53: clk: qcom: Add APCS clock controller support clk: qcom: Add regmap mux-div clocks support clk: qcom: Add A53 PLL support
2018-01-27Merge branches 'clk-at91', 'clk-imx7ulp', 'clk-axigen', 'clk-si5351' and ↵Stephen Boyd1-0/+1
'clk-pxa' into clk-next * clk-at91: clk: at91: pmc: Support backup for programmable clocks clk: at91: pmc: Save SCSR during suspend clk: at91: pmc: Wait for clocks when resuming * clk-imx7ulp: clk: Don't touch hardware when reparenting during registration * clk-axigen: clk: axi-clkgen: Round closest in round_rate() and recalc_rate() clk: axi-clkgen: Correctly handle nocount bit in recalc_rate() * clk-si5351: clk: si5351: _si5351_clkout_reset_pll() can be static clk: si5351: Do not enable parent clocks on probe clk: si5351: Rename internal plls to avoid name collisions clk: si5351: Apply PLL soft reset before enabling the outputs clk: si5351: Add DT property to enable PLL reset clk: si5351: implement remove handler * clk-pxa: clk: pxa: unbreak lookup of CLK_POUT
2018-01-27Merge branches 'clk-spreadtrum', 'clk-mvebu-dvfs', 'clk-qoriq', 'clk-imx' ↵Stephen Boyd2-0/+64
and 'clk-qcom-ipq8074' into clk-next * clk-spreadtrum: clk: sprd: add clocks support for SC9860 clk: sprd: Add dt-bindings include file for SC9860 dt-bindings: Add Spreadtrum clock binding documentation clk: sprd: add adjustable pll support clk: sprd: add composite clock support clk: sprd: add divider clock support clk: sprd: add mux clock support clk: sprd: add gate clock support clk: sprd: Add common infrastructure clk: move clock common macros out from vendor directories * clk-mvebu-dvfs: clk: mvebu: armada-37xx-periph: add DVFS support for cpu clocks clk: mvebu: armada-37xx-periph: prepare cpu clk to be used with DVFS clk: mvebu: armada-37xx-periph: cosmetic changes * clk-qoriq: clk: qoriq: add more divider clocks support * clk-imx: clk: imx51: uart4, uart5 gates only exist on imx50, imx53 * clk-qcom-ipq8074: clk: qcom: ipq8074: add misc resets for PCIE and NSS dt-bindings: clock: qcom: add misc resets for PCIE and NSS clk: qcom: ipq8074: add GP and Crypto clocks clk: qcom: ipq8074: add NSS ethernet port clocks clk: qcom: ipq8074: add NSS clocks clk: qcom: ipq8074: add PCIE, USB and SDCC clocks clk: qcom: ipq8074: add remaining PLL’s dt-bindings: clock: qcom: add remaining clocks for IPQ8074 clk: qcom: ipq8074: fix missing GPLL0 divider width clk: qcom: add parent map for regmap mux clk: qcom: add read-only divider operations
2018-01-12Merge tag 'amlogic-dt64-3' of ↵Olof Johansson1-2/+5
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt Another round of 64-bit DT changes for the new Amlogic SoCs. These include IR, SPI and ethernet MAC support for the new AXG family SoCs. * tag 'amlogic-dt64-3' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM64: dts: meson-axg: enable ethernet for A113D S400 board ARM64: dts: meson-axg: add ethernet mac controller ARM64: dts: meson-axg: add the SPICC controller ARM64: dts: meson-axg: enable IR controller arm64: dts: meson-axg: switch uart_ao clock to CLK81 clk: meson-axg: add clocks dt-bindings required header dt-bindings: clock: add compatible variant for the Meson-AXG Signed-off-by: Olof Johansson <olof@lixom.net>
2018-01-02clk: qcom: Add A53 PLL supportGeorgi Djakov1-0/+22
The CPUs on Qualcomm MSM8916-based platforms are clocked by two PLLs, a primary (A53) CPU PLL and a secondary fixed-rate GPLL0. These sources are connected to a mux and half-integer divider, which is feeding the CPU cores. This patch adds support for the primary CPU PLL which generates the higher range of frequencies above 1GHz. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Amit Kucheria <amit.kucheria@linaro.org> [sboyd@codeaurora.org: Move to devm provider registration, NUL terminate frequency table, made tristate/modular] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-12-29dt-bindings: fix the binding of Allwinner DE2 CCU of A83T and H3Icenowy Zheng1-2/+3
The DE2 CCU is different on A83T and H3 -- the parent of the clocks on A83T is PLL_DE but on H3 it's the DE module clock. This is not noticed when I develop the DE2 CCU driver. Fix the binding by using different compatibles for A83T and H3, adding notes for the PLL_DE usage on A83T, and change the binding example's compatible from A83T to H3 (as it specifies the DE module clock). Fixes: ed74f8a8a679 ("dt-bindings: add binding for the Allwinner DE2 CCU") Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2017-12-26dt-bindings: Use lower case hex in unit-addressesRob Herring4-4/+4
DT unit addresses should be lower case hex. Fix all the binding examples. Converted with the following command from Krzysztof Kozlowski: sed -e 's/@\([a-fA-F0-9_-]*\) {/@\L\1 {/' -i $(find Documentation/devicetree/bindings -name '*.txt') Signed-off-by: Rob Herring <robh@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-28 08:59:16 +0300