summaryrefslogtreecommitdiff
path: root/Documentation/ABI
AgeCommit message (Collapse)AuthorFilesLines
2020-10-25Merge tag 'for-linus-5.10b-rc1c-tag' of ↵Linus Torvalds2-1/+19
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull more xen updates from Juergen Gross: - a series for the Xen pv block drivers adding module parameters for better control of resource usge - a cleanup series for the Xen event driver * tag 'for-linus-5.10b-rc1c-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: Documentation: add xen.fifo_events kernel parameter description xen/events: unmask a fifo event channel only if it was masked xen/events: only register debug interrupt for 2-level events xen/events: make struct irq_info private to events_base.c xen: remove no longer used functions xen-blkfront: Apply changed parameter name to the document xen-blkfront: add a parameter for disabling of persistent grants xen-blkback: add a parameter for disabling of persistent grants
2020-10-22Merge tag 'rproc-v5.10' of ↵Linus Torvalds1-0/+44
git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc Pull remoteproc updates from Bjorn Andersson: "This introduces support for the Mediatek MT9182 SCP and controlling the Cortex R5F processors found in TI K3 platforms. It clones the longstanding debugfs interface for controlling crash handling to sysfs. Lastly it solves a bug where after a warm reset of Qualcomm platforms the modem would crash upon first boot" * tag 'rproc-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: remoteproc/mediatek: Remove non-standard dsb() remoteproc: Add recovery configuration to the sysfs interface remoteproc: Add coredump as part of sysfs interface remoteproc: Change default dump configuration to "disabled" remoteproc: k3-r5: Add loading support for on-chip SRAM regions remoteproc: k3-r5: Initialize TCM memories for ECC remoteproc: k3-r5: Add a remoteproc driver for R5F subsystem dt-bindings: remoteproc: Add bindings for R5F subsystem on TI K3 SoCs remoteproc/mediatek: Add support for mt8192 SCP remoteproc: Fixup coredump debugfs disable request remoteproc: qcom_q6v5: Assign mpss region to Q6 before MBA boot remoteproc/mediatek: fix null pointer dereference on null scp pointer remoteproc: stm32: Fix pointer assignement remoteproc: scp: add COMPILE_TEST dependency
2020-10-21xen-blkfront: Apply changed parameter name to the documentSeongJae Park1-1/+1
Commit 14e710fe7897 ("xen-blkfront: rename indirect descriptor parameter") changed the name of the module parameter for the maximum amount of segments in indirect requests but missed updating the document. This commit updates the document. Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Juergen Gross <jgross@suse.com> Acked-by: Roger Pau Monné <roger.pau@citrix.com> Link: https://lore.kernel.org/r/20200923061841.20531-4-sjpark@amazon.com Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2020-10-21xen-blkfront: add a parameter for disabling of persistent grantsSeongJae Park1-0/+9
Persistent grants feature provides high scalability. On some small systems, however, it could incur data copy overheads[1] and thus it is required to be disabled. It can be disabled from blkback side using a module parameter, 'feature_persistent'. But, it is impossible from blkfront side. For the reason, this commit adds a blkfront module parameter for disabling of the feature. [1] https://wiki.xen.org/wiki/Xen_4.3_Block_Protocol_Scalability Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Juergen Gross <jgross@suse.com> Acked-by: Roger Pau Monné <roger.pau@citrix.com> Link: https://lore.kernel.org/r/20200923061841.20531-3-sjpark@amazon.com Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2020-10-21xen-blkback: add a parameter for disabling of persistent grantsSeongJae Park1-0/+9
Persistent grants feature provides high scalability. On some small systems, however, it could incur data copy overheads[1] and thus it is required to be disabled. But, there is no option to disable it. For the reason, this commit adds a module parameter for disabling of the feature. [1] https://wiki.xen.org/wiki/Xen_4.3_Block_Protocol_Scalability Signed-off-by: Anthony Liguori <aliguori@amazon.com> Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Juergen Gross <jgross@suse.com> Acked-by: Roger Pau Monné <roger.pau@citrix.com> Link: https://lore.kernel.org/r/20200923061841.20531-2-sjpark@amazon.com Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2020-10-20Merge tag 'for-v5.10' of ↵Linus Torvalds1-3/+5
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: "Power-supply core: - add wireless type - properly document current direction Battery/charger driver changes: - new fuel-gauge/charger driver for RN5T618/RN5T619 - new charger driver for BQ25980, BQ25975 and BQ25960 - bq27xxx-battery: add support for TI bq34z100 - gpio-charger: convert to GPIO descriptors - gpio-charger: add optional support for charge current limiting - max17040: add support for max17041, max17043, max17044 - max17040: add support for max17048, max17049, max17058, max17059 - smb347-charger: add DT support - smb247-charger: add SMB345 and SMB358 support - simple-battery: add temperature properties - lots of minor fixes, cleanups and DT binding YAML conversions Reset drivers: - ocelot: Add support for Sparx5" * tag 'for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (81 commits) power: reset: POWER_RESET_OCELOT_RESET should depend on Ocelot or Sparx5 power: supply: bq25980: Fix uninitialized wd_reg_val and overrun power: supply: ltc2941: Fix ptr to enum cast power: supply: test-power: revise parameter printing to use sprintf power: supply: charger-manager: fix incorrect check on charging_duration_ms power: supply: max17040: Fix ptr to enum cast power: supply: bq25980: Fix uninitialized wd_reg_val power: supply: bq25980: remove redundant zero check on ret power: reset: ocelot: Add support for Sparx5 dt-bindings: reset: ocelot: Add Sparx5 support power: supply: sbs-battery: keep error code when get_property() fails power: supply: bq25980: Add support for the BQ259xx family dt-binding: bq25980: Add the bq25980 flash charger power: supply: fix spelling mistake "unprecise" -> "imprecise" power: supply: test_power: add missing newlines when printing parameters by sysfs power: supply: pm2301: drop duplicated i2c_device_id power: supply: charger-manager: drop unused charger assignment power: supply: rt9455: skip 'struct acpi_device_id' when !CONFIG_ACPI power: supply: goldfish: skip 'struct acpi_device_id' when !CONFIG_ACPI power: supply: bq25890: skip 'struct acpi_device_id' when !CONFIG_ACPI ...
2020-10-17Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds1-17/+0
Pull rdma updates from Jason Gunthorpe: "A usual cycle for RDMA with a typical mix of driver and core subsystem updates: - Driver minor changes and bug fixes for mlx5, efa, rxe, vmw_pvrdma, hns, usnic, qib, qedr, cxgb4, hns, bnxt_re - Various rtrs fixes and updates - Bug fix for mlx4 CM emulation for virtualization scenarios where MRA wasn't working right - Use tracepoints instead of pr_debug in the CM code - Scrub the locking in ucma and cma to close more syzkaller bugs - Use tasklet_setup in the subsystem - Revert the idea that 'destroy' operations are not allowed to fail at the driver level. This proved unworkable from a HW perspective. - Revise how the umem API works so drivers make fewer mistakes using it - XRC support for qedr - Convert uverbs objects RWQ and MW to new the allocation scheme - Large queue entry sizes for hns - Use hmm_range_fault() for mlx5 On Demand Paging - uverbs APIs to inspect the GID table instead of sysfs - Move some of the RDMA code for building large page SGLs into lib/scatterlist" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (191 commits) RDMA/ucma: Fix use after free in destroy id flow RDMA/rxe: Handle skb_clone() failure in rxe_recv.c RDMA/rxe: Move the definitions for rxe_av.network_type to uAPI RDMA: Explicitly pass in the dma_device to ib_register_device lib/scatterlist: Do not limit max_segment to PAGE_ALIGNED values IB/mlx4: Convert rej_tmout radix-tree to XArray RDMA/rxe: Fix bug rejecting all multicast packets RDMA/rxe: Fix skb lifetime in rxe_rcv_mcast_pkt() RDMA/rxe: Remove duplicate entries in struct rxe_mr IB/hfi,rdmavt,qib,opa_vnic: Update MAINTAINERS IB/rdmavt: Fix sizeof mismatch MAINTAINERS: CISCO VIC LOW LATENCY NIC DRIVER RDMA/bnxt_re: Fix sizeof mismatch for allocation of pbl_tbl. RDMA/bnxt_re: Use rdma_umem_for_each_dma_block() RDMA/umem: Move to allocate SG table from pages lib/scatterlist: Add support in dynamic allocation of SG table from pages tools/testing/scatterlist: Show errors in human readable form tools/testing/scatterlist: Rejuvenate bit-rotten test RDMA/ipoib: Set rtnl_link_ops for ipoib interfaces RDMA/uverbs: Expose the new GID query API to user space ...
2020-10-17Merge tag 'f2fs-for-5.10-rc1' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs updates from Jaegeuk Kim: "In this round, we've added new features such as zone capacity for ZNS and a new GC policy, ATGC, along with in-memory segment management. In addition, we could improve the decompression speed significantly by changing virtual mapping method. Even though we've fixed lots of small bugs in compression support, I feel that it becomes more stable so that I could give it a try in production. Enhancements: - suport zone capacity in NVMe Zoned Namespace devices - introduce in-memory current segment management - add standart casefolding support - support age threshold based garbage collection - improve decompression speed by changing virtual mapping method Bug fixes: - fix condition checks in some ioctl() such as compression, move_range, etc - fix 32/64bits support in data structures - fix memory allocation in zstd decompress - add some boundary checks to avoid kernel panic on corrupted image - fix disallowing compression for non-empty file - fix slab leakage of compressed block writes In addition, it includes code refactoring for better readability and minor bug fixes for compression and zoned device support" * tag 'f2fs-for-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (51 commits) f2fs: code cleanup by removing unnecessary check f2fs: wait for sysfs kobject removal before freeing f2fs_sb_info f2fs: fix writecount false positive in releasing compress blocks f2fs: introduce check_swap_activate_fast() f2fs: don't issue flush in f2fs_flush_device_cache() for nobarrier case f2fs: handle errors of f2fs_get_meta_page_nofail f2fs: fix to set SBI_NEED_FSCK flag for inconsistent inode f2fs: reject CASEFOLD inode flag without casefold feature f2fs: fix memory alignment to support 32bit f2fs: fix slab leak of rpages pointer f2fs: compress: fix to disallow enabling compress on non-empty file f2fs: compress: introduce cic/dic slab cache f2fs: compress: introduce page array slab cache f2fs: fix to do sanity check on segment/section count f2fs: fix to check segment boundary during SIT page readahead f2fs: fix uninit-value in f2fs_lookup f2fs: remove unneeded parameter in find_in_block() f2fs: fix wrong total_sections check and fsmeta check f2fs: remove duplicated code in sanity_check_area_boundary f2fs: remove unused check on version_bitmap ...
2020-10-16Merge tag 'powerpc-5.10-1' of ↵Linus Torvalds2-0/+63
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - A series from Nick adding ARCH_WANT_IRQS_OFF_ACTIVATE_MM & selecting it for powerpc, as well as a related fix for sparc. - Remove support for PowerPC 601. - Some fixes for watchpoints & addition of a new ptrace flag for detecting ISA v3.1 (Power10) watchpoint features. - A fix for kernels using 4K pages and the hash MMU on bare metal Power9 systems with > 16TB of RAM, or RAM on the 2nd node. - A basic idle driver for shallow stop states on Power10. - Tweaks to our sched domains code to better inform the scheduler about the hardware topology on Power9/10, where two SMT4 cores can be presented by firmware as an SMT8 core. - A series doing further reworks & cleanups of our EEH code. - Addition of a filter for RTAS (firmware) calls done via sys_rtas(), to prevent root from overwriting kernel memory. - Other smaller features, fixes & cleanups. Thanks to: Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Athira Rajeev, Biwen Li, Cameron Berkenpas, Cédric Le Goater, Christophe Leroy, Christoph Hellwig, Colin Ian King, Daniel Axtens, David Dai, Finn Thain, Frederic Barrat, Gautham R. Shenoy, Greg Kurz, Gustavo Romero, Ira Weiny, Jason Yan, Joel Stanley, Jordan Niethe, Kajol Jain, Konrad Rzeszutek Wilk, Laurent Dufour, Leonardo Bras, Liu Shixin, Luca Ceresoli, Madhavan Srinivasan, Mahesh Salgaonkar, Nathan Lynch, Nicholas Mc Guire, Nicholas Piggin, Nick Desaulniers, Oliver O'Halloran, Pedro Miraglia Franco de Carvalho, Pratik Rajesh Sampat, Qian Cai, Qinglang Miao, Ravi Bangoria, Russell Currey, Satheesh Rajendran, Scott Cheloha, Segher Boessenkool, Srikar Dronamraju, Stan Johnson, Stephen Kitt, Stephen Rothwell, Thiago Jung Bauermann, Tyrel Datwyler, Vaibhav Jain, Vaidyanathan Srinivasan, Vasant Hegde, Wang Wensheng, Wolfram Sang, Yang Yingliang, zhengbin. * tag 'powerpc-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (228 commits) Revert "powerpc/pci: unmap legacy INTx interrupts when a PHB is removed" selftests/powerpc: Fix eeh-basic.sh exit codes cpufreq: powernv: Fix frame-size-overflow in powernv_cpufreq_reboot_notifier powerpc/time: Make get_tb() common to PPC32 and PPC64 powerpc/time: Make get_tbl() common to PPC32 and PPC64 powerpc/time: Remove get_tbu() powerpc/time: Avoid using get_tbl() and get_tbu() internally powerpc/time: Make mftb() common to PPC32 and PPC64 powerpc/time: Rename mftbl() to mftb() powerpc/32s: Remove #ifdef CONFIG_PPC_BOOK3S_32 in head_book3s_32.S powerpc/32s: Rename head_32.S to head_book3s_32.S powerpc/32s: Setup the early hash table at all time. powerpc/time: Remove ifdef in get_dec() and set_dec() powerpc: Remove get_tb_or_rtc() powerpc: Remove __USE_RTC() powerpc: Tidy up a bit after removal of PowerPC 601. powerpc: Remove support for PowerPC 601 powerpc: Remove PowerPC 601 powerpc: Drop SYNC_601() ISYNC_601() and SYNC() powerpc: Remove CONFIG_PPC601_SYNC_FIX ...
2020-10-16Merge tag 'dmaengine-5.10-rc1' of ↵Linus Torvalds1-0/+20
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine updates from Vinod Koul: "Core: - Mark dma_request_slave_channel() deprecated in favour of dma_request_chan() - subsystem conversion for tasklet_setup() API - subsystem removal of local dma_parms for arm drivers Also updates to bunch of driver notably TI, DW and AXI-DMAC" * tag 'dmaengine-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (104 commits) dmaengine: owl-dma: fix kernel-doc style for enum dmaengine: zynqmp_dma: fix kernel-doc style for tasklet dmaengine: xilinx_dma: fix kernel-doc style for tasklet dmaengine: qcom: bam_dma: fix kernel-doc style for tasklet dmaengine: altera-msgdma: fix kernel-doc style for tasklet dmaengine: xilinx: dpdma: convert tasklets to use new tasklet_setup() API dmaengine: sf-pdma: convert tasklets to use new tasklet_setup() API dt-bindings: Fix 'reg' size issues in zynqmp examples dmaengine: rcar-dmac: drop double zeroing dmaengine: sh: drop double zeroing dmaengine: ioat: Allocate correct size for descriptor chunk dmaengine: ti: k3-udma: use devm_platform_ioremap_resource_byname dmaengine: fsl: remove bad channel update dmaengine: dma-jz4780: Fix race in jz4780_dma_tx_status dmaengine: pl330: fix argument for tasklet dmaengine: dmatest: Return boolean result directly in filter() dmaengine: dmatest: Check list for emptiness before access its last entry dmaengine: ti: k3-udma-glue: fix channel enable functions dmaengine: iop-adma: Fix pointer cast warnings dmaengine: dw-edma: Fix Using plain integer as NULL pointer in dw-edma-v0-debugfs.c ...
2020-10-15Merge tag 'sound-5.10-rc1' of ↵Linus Torvalds1-0/+16
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "The amount of changes is smaller at this round (what a surprise), but lots of activity is seen. Most of changes are about ASoC driver development, especially Intel platforms. Here are some highlights: General: - Replace all tasklet usages with other alternatives - Cleanup of the ASoC error unwinding code - Fixes for trivial issues caught by static checker - Spell fixes allover the places ALSA Core: - Lockdep fix for control devices - Fix for potential OSS sequencer mutex stalls HD-audio and USB-audio: - SoundBlaster AE-7 support - Changes in quirk table for the rename handling - Quirks for HP and ASUS machines, Pioneer DJ DJM-250MK2. ASoC: - Lots of updates for Intel SOF and SoundWire enablement - Replacement of the DSP driver for some older x86 systems; the new code was written from scratch, better maintenance expected - Helpers for parsing auxiluary devices from the device tree - New support for AllWinner A64, Cirrus Logic CS4234, Mediatek MT6359 Microchip S/PDIF TX and RX controllers, Realtek RT1015P, and Texas Instruments J721E, TAS2110, TAS2564 and TAS2764" * tag 'sound-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (498 commits) ALSA: hda/hdmi: fix incorrect locking in hdmi_pcm_close ALSA: hda: fix jack detection with Realtek codecs when in D3 ALSA: fireworks: use semicolons rather than commas to separate statements ALSA: hda: use semicolons rather than commas to separate statements ALSA: hda/i915 - fix list corruption with concurrent probes ASoC: dmaengine: Document support for TX only or RX only streams ASoC: mchp-spdiftx: remove 'TX' from playback stream name ASoC: ti: davinci-mcasp: Use &pdev->dev for early dev_warn ASoC: tas2764: Add the driver for the TAS2764 dt-bindings: tas2764: Add the TAS2764 binding doc ASoC: Intel: catpt: Add explicit DMADEVICES kconfig dependency ASoC: Intel: catpt: Fix compilation when CONFIG_MODULES is disabled ASoC: stm32: dfsdm: add actual resolution trace ASoC: stm32: dfsdm: change rate limits ASoC: qcom: sc7180: Add support for audio over DP Asoc: qcom: lpass-platform : Increase buffer size ASoC: qcom: Add support for lpass hdmi driver Asoc: qcom: lpass:Update lpaif_dmactl members order Asoc:qcom:lpass-cpu:Update dts property read API ASoC: dt-bindings: Add dt binding for lpass hdmi ...
2020-10-15Merge tag 'char-misc-5.10-rc1' of ↵Linus Torvalds7-3/+135
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big set of char, misc, and other assorted driver subsystem patches for 5.10-rc1. There's a lot of different things in here, all over the drivers/ directory. Some summaries: - soundwire driver updates - habanalabs driver updates - extcon driver updates - nitro_enclaves new driver - fsl-mc driver and core updates - mhi core and bus updates - nvmem driver updates - eeprom driver updates - binder driver updates and fixes - vbox minor bugfixes - fsi driver updates - w1 driver updates - coresight driver updates - interconnect driver updates - misc driver updates - other minor driver updates All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (396 commits) binder: fix UAF when releasing todo list docs: w1: w1_therm: Fix broken xref, mistakes, clarify text misc: Kconfig: fix a HISI_HIKEY_USB dependency LSM: Fix type of id parameter in kernel_post_load_data prototype misc: Kconfig: add a new dependency for HISI_HIKEY_USB firmware_loader: fix a kernel-doc markup w1: w1_therm: make w1_poll_completion static binder: simplify the return expression of binder_mmap test_firmware: Test partial read support firmware: Add request_partial_firmware_into_buf() firmware: Store opt_flags in fw_priv fs/kernel_file_read: Add "offset" arg for partial reads IMA: Add support for file reads without contents LSM: Add "contents" flag to kernel_read_file hook module: Call security_kernel_post_load_data() firmware_loader: Use security_post_load_data() LSM: Introduce kernel_post_load_data() hook fs/kernel_read_file: Add file_size output argument fs/kernel_read_file: Switch buffer size arg to size_t fs/kernel_read_file: Remove redundant size argument ...
2020-10-15Merge tag 'staging-5.10-rc1' of ↵Linus Torvalds4-28/+91
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging / IIO driver updates from Greg KH: "Here is the large set of staging and IIO driver updates for 5.10-rc1. Included in here are: - new IIO drivers - new IIO driver frameworks - various IIO driver fixes and updates - IIO device tree conversions to yaml - so many minor staging driver coding style cleanups - most cdev driver moved out of staging - no staging drivers added or removed Full details are in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'staging-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (476 commits) staging: comedi: check validity of wMaxPacketSize of usb endpoints found staging: wfx: improve robustness of wfx_get_hw_rate() staging: wfx: drop unicode characters from strings staging: wfx: gpiod_get_value() can return an error staging: wfx: increase robustness of hif_generic_confirm() staging: wfx: wfx_init_common() returns NULL on error staging: wfx: standardize the error when vif does not exist staging: wfx: check memory allocation staging: wfx: improve error handling of hif_join() staging: dpaa2-switch: add a dpaa2_switch prefix to all functions in ethsw.c staging: dpaa2-switch: add a dpaa2_switch_ prefix to all functions in ethsw-ethtool.c staging: rtl8188eu: Fix long lines dt-bindings: staging: wfx: silabs,wfx yaml conversion staging: wfx: update copyrights dates staging: wfx: fix QoS priority for slow buses staging: wfx: fix BA sessions for older firmwares staging: wfx: remove remaining code of 'secure link' feature staging: wfx: fix handling of MMIC error staging: vchiq: Fix list_for_each exit tests staging: greybus: use __force when assigning __u8 value to snd_ctl_elem_type_t ...
2020-10-15Merge tag 'mfd-next-5.10' of ↵Linus Torvalds1-0/+15
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Add support for initialising shared (between children) Regmaps - Add support for Kontron SL28CPLD - Add support for ENE KB3930 Embedded Controller - Add support for Intel FPGA PAC MAX 10 BMC New Device Support: - Add support for Power to Ricoh RN5T618 - Add support for UART to Intel Lakefield - Add support for LP87524_Q1 to Texas Instruments LP87565 New Functionality: - Device Tree; ene-kb3930, sl28cpld, syscon, lp87565, lp87524-q1 - Use new helper dev_err_probe(); madera-core, stmfx, wcd934x - Use new GPIOD API; dm355evm_msp - Add wake-up capability; sprd-sc27xx-spi - Add ACPI support; kempld-core Fix-ups: - Trivial (spelling/whitespace); Kconfig, ab8500 - Fix for unused variables; khadas-mcu, kempld-core - Remove unused header file(s); mt6360-core - Use correct IRQ flags in docs; act8945a, gateworks-gsc, rohm,bd70528-pmic - Add COMPILE_TEST support; asic3, tmio_core - Add dependency on I2C; SL28CPLD Bug Fixes: - Fix memory leak(s); sm501 - Do not free regmap_config's 'name' until exit; syscon" * tag 'mfd-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (34 commits) mfd: kempld-core: Fix unused variable 'kempld_acpi_table' when !ACPI mfd: sl28cpld: Depend on I2C mfd: asic3: Build if COMPILE_TEST=y dt-bindings: mfd: Correct interrupt flags in examples mfd: Add ACPI support to Kontron PLD driver mfd: intel-m10-bmc: Add Intel MAX 10 BMC chip support for Intel FPGA PAC mfd: lp87565: Add LP87524-Q1 variant dt-bindings: mfd: Add LP87524-Q1 dt-bindings: mfd: lp87565: Convert to yaml mfd: mt6360: Remove unused include <linux/version.h> mfd: sm501: Fix leaks in probe() mfd: syscon: Don't free allocated name for regmap_config dt-bindings: mfd: syscon: Document Exynos3 and Exynos5433 compatibles dt-bindings: mfd: syscon: Merge Samsung Exynos Sysreg bindings dt-bindings: mfd: ab8500: Remove weird Unicode characters mfd: sprd: Add wakeup capability for PMIC IRQ mfd: intel-lpss: Add device IDs for UART ports for Lakefield mfd: dm355evm_msp: Convert LEDs to GPIO descriptor table mfd: wcd934x: Simplify with dev_err_probe() mfd: stmfx: Simplify with dev_err_probe() ...
2020-10-14Merge tag 'acpi-5.10-rc1' of ↵Linus Torvalds1-0/+16
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These add support for generic initiator-only proximity domains to the ACPI NUMA code and the architectures using it, clean up some non-ACPICA code referring to debug facilities from ACPICA, reduce the overhead related to accessing GPE registers, add a new DPTF (Dynamic Power and Thermal Framework) participant driver, update the ACPICA code in the kernel to upstream revision 20200925, add a new ACPI backlight whitelist entry, fix a few assorted issues and clean up some code. Specifics: - Add support for generic initiator-only proximity domains to the ACPI NUMA code and the architectures using it (Jonathan Cameron) - Clean up some non-ACPICA code referring to debug facilities from ACPICA that are not actually used in there (Hanjun Guo) - Add new DPTF driver for the PCH FIVR participant (Srinivas Pandruvada) - Reduce overhead related to accessing GPE registers in ACPICA and the OS interface layer and make it possible to access GPE registers using logical addresses if they are memory-mapped (Rafael Wysocki) - Update the ACPICA code in the kernel to upstream revision 20200925 including changes as follows: + Add predefined names from the SMBus sepcification (Bob Moore) + Update acpi_help UUID list (Bob Moore) + Return exceptions for string-to-integer conversions in iASL (Bob Moore) + Add a new "ALL <NameSeg>" debugger command (Bob Moore) + Add support for 64 bit risc-v compilation (Colin Ian King) + Do assorted cleanups (Bob Moore, Colin Ian King, Randy Dunlap) - Add new ACPI backlight whitelist entry for HP 635 Notebook (Alex Hung) - Move TPS68470 OpRegion driver to drivers/acpi/pmic/ and split out Kconfig and Makefile specific for ACPI PMIC (Andy Shevchenko) - Clean up the ACPI SoC driver for AMD SoCs (Hanjun Guo) - Add missing config_item_put() to fix refcount leak (Hanjun Guo) - Drop lefrover field from struct acpi_memory_device (Hanjun Guo) - Make the ACPI extlog driver check for RDMSR failures (Ben Hutchings) - Fix handling of lid state changes in the ACPI button driver when input device is closed (Dmitry Torokhov) - Fix several assorted build issues (Barnabás Pőcze, John Garry, Nathan Chancellor, Tian Tao) - Drop unused inline functions and reduce code duplication by using kobj_to_dev() in the NFIT parsing code (YueHaibing, Wang Qing) - Serialize tools/power/acpi Makefile (Thomas Renninger)" * tag 'acpi-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits) ACPICA: Update version to 20200925 Version 20200925 ACPICA: Remove unnecessary semicolon ACPICA: Debugger: Add a new command: "ALL <NameSeg>" ACPICA: iASL: Return exceptions for string-to-integer conversions ACPICA: acpi_help: Update UUID list ACPICA: Add predefined names found in the SMBus sepcification ACPICA: Tree-wide: fix various typos and spelling mistakes ACPICA: Drop the repeated word "an" in a comment ACPICA: Add support for 64 bit risc-v compilation ACPI: button: fix handling lid state changes when input device closed tools/power/acpi: Serialize Makefile ACPI: scan: Replace ACPI_DEBUG_PRINT() with pr_debug() ACPI: memhotplug: Remove 'state' from struct acpi_memory_device ACPI / extlog: Check for RDMSR failure ACPI: Make acpi_evaluate_dsm() prototype consistent docs: mm: numaperf.rst Add brief description for access class 1. node: Add access1 class to represent CPU to memory characteristics ACPI: HMAT: Fix handling of changes from ACPI 6.2 to ACPI 6.3 ACPI: Let ACPI know we support Generic Initiator Affinity Structures x86: Support Generic Initiator only proximity domains ...
2020-10-14remoteproc: Add recovery configuration to the sysfs interfaceRishabh Bhatnagar1-0/+20
Add recovery configuration to the sysfs interface. This will allow usage of this configuration feature in production devices where access to debugfs might be limited. Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org> Link: https://lore.kernel.org/r/1601662144-5964-4-git-send-email-rishabhb@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-10-14remoteproc: Add coredump as part of sysfs interfaceRishabh Bhatnagar1-0/+24
Add coredump as part of the sysfs interface. This will allow usage of this configuration feature in production devices where access to debugfs might be limited. Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org> Link: https://lore.kernel.org/r/1601662144-5964-3-git-send-email-rishabhb@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-10-14Merge tag 'selinux-pr-20201012' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux Pull selinux updates from Paul Moore: "A decent number of SELinux patches for v5.10, twenty two in total. The highlights are listed below, but all of the patches pass our test suite and merge cleanly. - A number of changes to how the SELinux policy is loaded and managed inside the kernel with the goal of improving the atomicity of a SELinux policy load operation. These changes account for the bulk of the diffstat as well as the patch count. A special thanks to everyone who contributed patches and fixes for this work. - Convert the SELinux policy read-write lock to RCU. - A tracepoint was added for audited SELinux access control events; this should help provide a more unified backtrace across kernel and userspace. - Allow the removal of security.selinux xattrs when a SELinux policy is not loaded. - Enable policy capabilities in SELinux policies created with the scripts/selinux/mdp tool. - Provide some "no sooner than" dates for the SELinux checkreqprot sysfs deprecation" * tag 'selinux-pr-20201012' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: (22 commits) selinux: provide a "no sooner than" date for the checkreqprot removal selinux: Add helper functions to get and set checkreqprot selinux: access policycaps with READ_ONCE/WRITE_ONCE selinux: simplify away security_policydb_len() selinux: move policy mutex to selinux_state, use in lockdep checks selinux: fix error handling bugs in security_load_policy() selinux: convert policy read-write lock to RCU selinux: delete repeated words in comments selinux: add basic filtering for audit trace events selinux: add tracepoint on audited events selinux: Create new booleans and class dirs out of tree selinux: Standardize string literal usage for selinuxfs directory names selinux: Refactor selinuxfs directory populating functions selinux: Create function for selinuxfs directory cleanup selinux: permit removing security.selinux xattr before policy load selinux: fix memdup.cocci warnings selinux: avoid dereferencing the policy prior to initialization selinux: fix allocation failure check on newpolicy->sidtab selinux: refactor changing booleans selinux: move policy commit after updating selinuxfs ...
2020-10-13Merge tag 'docs-5.10' of git://git.lwn.net/linuxLinus Torvalds1-0/+5
Pull documentation updates from Jonathan Corbet: "As hoped, things calmed down for docs this cycle; fewer changes and almost no conflicts at all. This includes: - A reworked and expanded user-mode Linux document - Some simplifications and improvements for submitting-patches.rst - An emergency fix for (some) problems with Sphinx 3.x - Some welcome automarkup improvements to automatically generate cross-references to struct definitions and other documents - The usual collection of translation updates, typo fixes, etc" * tag 'docs-5.10' of git://git.lwn.net/linux: (81 commits) gpiolib: Update indentation in driver.rst for code excerpts Documentation/admin-guide: tainted-kernels: Fix typo occured Documentation: better locations for sysfs-pci, sysfs-tagging docs: programming-languages: refresh blurb on clang support Documentation: kvm: fix a typo Documentation: Chinese translation of Documentation/arm64/amu.rst doc: zh_CN: index files in arm64 subdirectory mailmap: add entry for <mstarovoitov@marvell.com> doc: seq_file: clarify role of *pos in ->next() docs: trace: ring-buffer-design.rst: use the new SPDX tag Documentation: kernel-parameters: clarify "module." parameters Fix references to nommu-mmap.rst docs: rewrite admin-guide/sysctl/abi.rst docs: fb: Remove vesafb scrollback boot option docs: fb: Remove sstfb scrollback boot option docs: fb: Remove matroxfb scrollback boot option docs: fb: Remove framebuffer scrollback boot option docs: replace the old User Mode Linux HowTo with a new one Documentation/admin-guide: blockdev/ramdisk: remove use of "rdev" Documentation/admin-guide: README & svga: remove use of "rdev" ...
2020-10-08docs: w1: w1_therm: Fix broken xref, mistakes, clarify textIvan Zaentsev1-3/+3
sysfs attribute names are mixed with the same normal text terms. Use ReST to distinguish. Fix typos and mistakes. Reported-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Ivan Zaentsev <ivan.zaentsev@wirenboard.ru> Link: https://lore.kernel.org/r/20201008054259.5461-1-ivan.zaentsev@wirenboard.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-07powerpc/hv-gpci: Add sysfs files inside hv-gpci device to show cpumaskKajol Jain1-0/+7
Patch here adds a cpumask attr to hv_gpci pmu along with ABI documentation. Primary use to expose the cpumask is for the perf tool which has the capability to parse the driver sysfs folder and understand the cpumask file. Having cpumask file will reduce the number of perf command line parameters (will avoid "-C" option in the perf tool command line). It can also notify the user which is the current cpu used to retrieve the counter data. command:# cat /sys/devices/hv_gpci/cpumask 0 Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201003074943.338618-5-kjain@linux.ibm.com
2020-10-07Documentation/ABI: Add ABI documentation for hv-gpci formatKajol Jain1-0/+31
This patch adds ABI documentation for hv-gpci event format. Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201003074943.338618-3-kjain@linux.ibm.com
2020-10-07Documentation/ABI: Add ABI documentation for hv-24x7 formatKajol Jain1-0/+25
This patch adds ABI documentation for hv-24x7 format. Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201003074943.338618-2-kjain@linux.ibm.com
2020-10-03power: supply: document current directionSebastian Reichel1-2/+4
Currently the sign for CURRENT_NOW and CURRENT_AVG is a bit of a mess. There are basically 3 different ways battery fuel gauges report the current: 1. uses negative values for discharging and positive values for charging 2. uses positive values for discharging and negative values for discharging (opposit of 1) 3. only uses positive values As a result userspace currently cannot use the sign at all in a generic way. Let's solve the issue by documenting a canonical way for reporting the data and ensure new drivers follow this way. Then existing drivers can be fixed on a case-by-case basis. The 'negative value = battery discharging' has been choosen, since there are only very few drivers doing it the other way around. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-10-02ASoC: Intel: catpt: Simple sysfs attributesCezary Rojewski1-0/+16
Add sysfs entries for displaying version of FW currently in use as well as dumping full FW information including build and log-providers hashes. Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200929141247.8058-10-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-10-02w1: w1_therm: Add support for GXCAS GX20MH01 device.Ivan Zaentsev1-2/+2
GX20MH01 device shares family number 0x28 with DS18B20. The device is generally compatible with DS18B20. Added are the lowest 2^-5, 2^-6 temperature bits in Config register; R2 bit in Config register enabling 13 and 14 bit resolutions. It is powered up in 14 bit mode. Signed-off-by: Ivan Zaentsev <ivan.zaentsev@wirenboard.ru> Link: https://lore.kernel.org/r/20200904160004.87710-2-ivan.zaentsev@wirenboard.ru Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02w1: w1_therm: Add sysfs entries to control conversion time and driver featuresIvan Zaentsev1-0/+47
The conversion time of common DS18B20 clones deviates from datasheet specs. Allow adjustment and automatic measure of the conversion time. Add 'conv_time' sysfs attribute: *read*: Current conversion time in milliseconds. *write*: '0': Set default conversion time. '1': Measure and set the conversion time. Make a single temperature conversion, poll and measure an actual value. Measured value is increased by 20% for temperature drift. A new conversion time is returned by reading the same attribute. other positive value: Set the conversion time in milliseconds. The setting is active until a resolution change. Then it is reset to default conversion time for a new resolution. Add 'features' sysfs attribute to control optional driver settings per device. Bit masks to read/write (logical OR): 1: Enable check for conversion success. If byte 6 of scratchpad memory is 0xC after conversion, and temperature reads 85.00 (powerup value) or 127.94 (insufficient power) - return a conversion error. 2: Enable poll for conversion completion. Generate read cycles after the conversion start and wait for 1's. In parasite power mode this feature is not available. There are some clones of DS18B20 with fixed 12 bit resolution. Make the driver verify the resolution by reading back the device after resolution change. Signed-off-by: Ivan Zaentsev <ivan.zaentsev@wirenboard.ru> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Link: https://lore.kernel.org/r/20200904160004.87710-1-ivan.zaentsev@wirenboard.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus: mhi: core: Introduce sysfs entries for MHIBhaumik Bhatt1-0/+21
Introduce sysfs entries to enable userspace clients the ability to read the serial number and the OEM PK Hash values obtained from BHI. OEMs need to read these device-specific hardware information values through userspace for factory testing purposes and cannot be exposed via degbufs as it may remain disabled for performance reasons. Also, update the documentation for ABI to include these entries. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> [mani: used dev_groups to manage sysfs attributes] Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200929175218.8178-16-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-01Merge tag 'soundwire-5.10-rc1' of ↵Greg Kroah-Hartman1-0/+18
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-next Vinod writes: soundwire updates for 5.10-rc1 This round of update includes: - Generic bandwidth allocation algorithm from Intel folks - PM support for Intel chipsets - Updates to Intel drivers which makes sdw usable on latest laptops - Support for MMIO SDW controllers found in QC chipsets - Update to subsystem to use helpers in bitfield.h to manage register bits * tag 'soundwire-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (66 commits) soundwire: sysfs: add slave status and device number before probe soundwire: bus: add enumerated Slave device to device list soundwire: remove an unnecessary NULL check soundwire: cadence: add data port test fail interrupt soundwire: intel: enable test modes soundwire: enable Data Port test modes soundwire: intel: use {u32|u16}p_replace_bits soundwire: cadence: use u32p_replace_bits soundwire: qcom: get max rows and cols info from compatible soundwire: qcom: add support to block packing mode soundwire: qcom: clear BIT FIELDs before value set. soundwire: Add generic bandwidth allocation algorithm soundwire: cadence: add parity error injection through debugfs soundwire: bus: export broadcast read/write capability for tests ASoC: codecs: realtek-soundwire: ignore initial PARITY errors soundwire: bus: use quirk to filter out invalid parity errors soundwire: slave: add first_interrupt_done status soundwire: bus: filter-out unwanted interrupt reports ASoC/soundwire: bus: use property to set interrupt masks soundwire: qcom: fix SLIBMUS/SLIMBUS typo ...
2020-09-30mfd: intel-m10-bmc: Add Intel MAX 10 BMC chip support for Intel FPGA PACXu Yilun1-0/+15
This patch implements the basic functions of the BMC chip for some Intel FPGA PCIe Acceleration Cards (PAC). The BMC is implemented using the Intel MAX 10 CPLD. This BMC chip is connected to the FPGA by a SPI bus. To provide direct register access from the FPGA, the "SPI slave to Avalon Master Bridge" (spi-avmm) IP is integrated in the chip. It converts encoded streams of bytes from the host to the internal register read/write on the Avalon bus. So This driver uses the regmap-spi-avmm for register accessing. Signed-off-by: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> Signed-off-by: Russ Weight <russell.h.weight@intel.com> Reviewed-by: Tom Rix <trix@redhat.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-09-29selinux: provide a "no sooner than" date for the checkreqprot removalPaul Moore1-1/+1
We marked /sys/fs/selinux/checkreqprot as deprecated in Linux v5.7, but didn't provide any guidance as to the timeframe. Considering the state of checkreqprot, it seems like one year should be enough time. Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2020-09-28soundwire: sysfs: add slave status and device number before probePierre-Louis Bossart1-0/+18
The MIPI DisCo device properties that are read by the driver from platform firmware, or hard-coded in the driver, should only be provided as sysfs entries when a driver probes successfully. However the device status and device number is updated even when there is no driver present, and hence can be updated when a Slave device is detected on the bus without being described in platform firmware and without any driver registered/probed. As suggested by GregKH, the attribute group for Slave status and device number is is added by default upon device registration. Credits to Vinod Koul for the status_show() function, shared in a separate patch and used as is here. The status table was modified to remove an unnecessary enum and status_show() is handled in a different group attribute than what was suggested by Vinod. Tested-by: Srinivas Kandgatla <srinivas.kandagatla@linaro.org> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Co-developed-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20200924194430.121058-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-22habanalabs: replace armcp with the generic cpucpOded Gabbay1-1/+17
ArmCP mandates that the device CPU is always an ARM processor, which might be wrong in the future. Most of this change is an internal renaming of variables, functions and defines but there are two entries in sysfs which have armcp in their names. Add identical cpucp entries but don't remove yet the armcp entries. Those will be deprecated next year. Add the documentation about it in sysfs documentation. Signed-off-by: Moti Haimovski <mhaimovski@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-09-22Merge tag 'iio-for-5.10b-take2' of ↵Greg Kroah-Hartman2-0/+21
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Second set of features and cleanups for IIO in 5.10 We have a couple of changes that apply to large sets of drivers, so I have grouped those to keep this short. There are a few late breaking fixes in here that can wait for the merge window. dt yaml conversions ------------------- * adi,ad7768-1 * adi,ad7949 * aspeed,ast2400 * cosmic,10001-adc * dlg,da9150-gpadc * fsl,imx25-gcq * fsl,imx7d-adc * fsl,vf610 * holt,hi8435 * marvell,berlin2-adc * motorola,cpcap-adc * nuvoton,nau7802 * nuvoton,npcm750-adc * nxp,lpc1850-adc * nxp,lpc3220 * sprd,sc2720-adc * st,stmpe-adc * ti,adc12138 * ti,ads1015 * ti,ads7950 * ti,twl4030-madc Features -------- * adxrs290 - Add triggered buffer support and expose data ready signal as a possible trigger. Includes updating bindings. - Add debugfs hooks for register access. * mlx90632 - Add a clear user interface to override the measured ambient temperature. * vl53l0x - Add IRQ support including dt bindings. Cleanups and minor fixes ------------------------ (groups) Replace mlock with local lock: * adf4350 * exynos-adc * fls-imx25-gcq * stm32-dac devm use to simplify probe error handling and remove functions. * adis16201 * adis16203 * adis16209 * adis16240 * adis16136 * adis16260 * adis16400 * adis16460 * adis16480 * adis library - drop unused adis_setup_buffer_and_trigger() of_match_ptr removal and incorrect ACPI binding removal of_match_ptr() rarely makes sense in an IIO driver as space saving is trivial and it breaks ACPI PRP0001 based instantiation. Mostly this series is about removing examples that get copied into new drivers. * ad2s1200 * ad5272 * ad5446 * ad5592r * ad5593r * ad5703 * ak8974 * ak8975 * ams-iaq-core * as3935 * atlas-sensor * ds1803 * hdc100x * htu21 * icp10100 * lmp91000 * pulsedlight * max30102 * max5432 * max5481 * mcp4018 * mcp4131 * mcp4531 * mcp4725 * ms5611 * ms5637 * si7020 * sgp30 * ti-dac082s085 * ti-dac5571 * tmp007 * tsys01 * vz89x * zpa2326 kernel-doc fixes * iio-core * ad7303 * ad7947 * adis16080 * adis16400 * iio_dummy_evgen * sgp30 Fixes for buffer alignment when passed to iio_push_to_buffers_with_timestamp() This is a long running effort. There are a few more drivers to come. * inv_mpu6050 * itg3200 * si1145 * st_lsm6dsx * ti-adc0832 * ti-adc12138 (not driver focused) * MAINTAINERS - Consolidate Analog Device IIO entries whilst removing Beniamin Bia. - Remove Hartmut Knaack as a listed IIO maintainer as he hasn't been active for a long time and people are getting intermitted bounces. * Add __printf() markings to a few functions that were missing them. * drop some rotted documentation from staging. * rework buffer sysfs file creation (precursor to multiple buffer support) (individual drivers) * ad5592r - Fix use of true for IIO_SHARED_BY_TYPE - Tidy up locking and indentation. * ad9467 - Improve error message on chip-id missmatch. - Use more appropriate error value if chip-id not recognised. * adis-library - Simplify burst mode handling. * adxrs290 - Make sure to switch device to standby mode during remove. * as73211 - Increase measurement timeout as seems some devices are slower. * bma180 - Fix use of true fo IIO_SHARED_BY_TYPE * exynos_adc - Update binding to require second interrut with touch screen. - Update binding to not require syscon on S5Pv210 * hmc5843 - Fix use of true for IIO_SHARED_BY_TYPE * inv_mpu6050 - Use regmap_noinc_read() for fifo reading. * palmas_gpadc - Use module_platform_driver() to remove boilerplate. * meson-saradc - style consistency fixes * rockchip_saradc - Allow compile testing with !ARM. * st_lsm6dsx - Changing scaling factor to use IIO_VAL_INT_PLUS_NANO to improve precision. - Fix an issue with unchecked return value. * stm32-adc - Fix a missing return introduced in dev_err_probe() patch earlier in cycle. * sx9310 - Prefer async mode for probe as paticularly slow startup. * vcnl4000 - Add missing interrupt property to dt binding. * tag 'iio-for-5.10b-take2' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (126 commits) dt-bindings: iio: vishay,vcnl4000: add interrupts property iio:imu:inv_mpu6050: Use regmap_noinc_read for fifo reads. iio:imu:inv_mpu6050 Fix dma and ts alignment and data leak issues. iio:adc:ti-adc12138 Fix alignment issue with timestamp iio:adc:ti-adc0832 Fix alignment issue with timestamp iio:imu:st_lsm6dsx Fix alignment and data leak issues iio:light:si1145: Fix timestamp alignment and prevent data leak. iio:gyro:itg3200: Fix timestamp alignment and prevent data leak. iio:imu:st_lsm6dsx: check st_lsm6dsx_shub_read_output return iio: adc: exynos_adc: Replace indio_dev->mlock with own device lock dt-bindings:iio:adc:holt,hi8435 yaml conversion dt-bindings:iio:adc:adi,ad7768-1 yaml conversion dt-bindings:iio:adc:adi,ad7949 yaml conversion dt-bindings:iio:adc:dlg,da9150-gpadc yaml conversion dt-bindings:iio:adc:motorola,cpcap-adc yaml conversion dt-bindings:iio:adc:nxp,lpc3220-adc yaml conversion dt-bindings:iio:adc:nxp,lpc1850-adc yaml conversion dt-bindings:iio:adc:fsl,imx25-gcq yaml conversion dt-bindings:iio:adc:fsl,imx7d-adc yaml conversion dt-bindings:iio:adc:ti,ads1015 yaml conversion ...
2020-09-18ACPI: DPTF: Add PCH FIVR participant driverSrinivas Pandruvada1-0/+16
This driver adds support for Dynamic Platform and Thermal Framework (DPTF) PCH (Platform Controller Hub) FIVR (Fully Integrated Voltage Regulator) participant support. This participant is responsible for exposing platform telemetry and control for: freq_mhz_high_clock freq_mhz_low_clock These attributes are used to get and set PCH FIVR switching frequency for thermal and radio frequency interference mitigation. Refer to Documentation/ABI/testing/sysfs-platform-dptf for ABI details. ACPI methods description used in this driver: RFC0: This ACPI method to set PCH FIVR switching frequency when FIVR clock is 19.2MHz or 24MHz. The ACPI method takes a DWORD value. GFC0: This ACPI method to get PCH FIVR switching frequency when FIVR clock is 19.2MHz or 24MHz. RFC1: This ACPI method to set PCH FIVR switching frequency when FIVR clock is 38.4MHz. The ACPI method takes a DWORD value. GFC1: This ACPI method to get PCH FIVR switching frequency when FIVR clock is 38.4MHz. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-09-16docs: stable-ABI: Document /sys/kernel/notesStephen Boyd1-0/+5
Document the notes file in sysfs as the running vmlinux's .note section in binary format. Hopefully this helps someone like me realize the kernel exposes the note section in sysfs in the future. Take the date from when the file was introduced. It's been a while so presumably this is stable and not testing material. Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20200909063752.931283-1-swboyd@chromium.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-09-16staging:iio:light: Move tsl2x7x ABI docs to correct location.Jonathan Cameron1-0/+13
These seem to be up to date but never moved out of staging when the driver did. Hence let us move them out now. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Brian Masney <masneyb@onstation.org> Cc: Brian Masney <masneyb@onstation.org> Link: https://lore.kernel.org/r/20200905174721.216452-3-jic23@kernel.org
2020-09-14Merge tag 'fpga-for-5.10' of ↵Greg Kroah-Hartman1-0/+15
git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga into char-misc-next Moritz writes: Here is the first set of changes for the 5.10-rc1 merge window. Xilinx: - Luca's changes clean up the xilinx-spi driver and add better diagnostics on errors. Core: - I cleaned up a stray comment. - Richard's change marks FPGA manager tasks un-interruptible. - Tom has agreed to help out as Reviewer in the FPGA Manager subsystem. DFL: - Xu's changes add a new bus that is the first part of a series to support adding devices via DFL (the other parts are still under review) All patches have been reviewed on the mailing list, and have been in the last few linux-next releases (as part of my for-next branch) without issues. Signed-off-by: Moritz Fischer <mdf@kernel.org> * tag 'fpga-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga: fpga: dfl: create a dfl bus type to support DFL devices fpga: fpga-region: Cleanup an outdated comment fpga: dfl: map feature mmio resources in their own feature drivers fpga manager: xilinx-spi: provide better diagnostics on programming failure fpga manager: xilinx-spi: add error checking after gpiod_get_value() fpga manager: xilinx-spi: fix write_complete timeout handling fpga manager: xilinx-spi: remove final dot from dev_err() strings fpga manager: xilinx-spi: remove stray comment fpga: dfl: change data type of feature id to u16 MAINTAINERS: Add Tom Rix as fpga reviewer fpga: stratix10-soc: make FPGA task un-interruptible
2020-09-14Merge 5.9-rc5 into staging-nextGreg Kroah-Hartman1-1/+1
We want the staging/iio changes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-13iio: temperature: mlx90632: Interface to change object ambient temperatureCrt Mori1-0/+8
Since object temperature might be different than the sensor temperature the infrared sensors should provide an interface to inject ambient temperature. This was in past done via write to ambient temperature interface (in_temp_ambient_raw), but I think most people did not know about it. This solution introduces a new iio type of the CALIBAMBIENT which is hopefully more descriptive and more explicit about the purpose and capabilities of the sensors. Signed-off-by: Crt Mori <cmo@melexis.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20200906210231.383976-1-cmo@melexis.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-09-11f2fs: support age threshold based garbage collectionChao Yu1-1/+2
There are several issues in current background GC algorithm: - valid blocks is one of key factors during cost overhead calculation, so if segment has less valid block, however even its age is young or it locates hot segment, CB algorithm will still choose the segment as victim, it's not appropriate. - GCed data/node will go to existing logs, no matter in-there datas' update frequency is the same or not, it may mix hot and cold data again. - GC alloctor mainly use LFS type segment, it will cost free segment more quickly. This patch introduces a new algorithm named age threshold based garbage collection to solve above issues, there are three steps mainly: 1. select a source victim: - set an age threshold, and select candidates beased threshold: e.g. 0 means youngest, 100 means oldest, if we set age threshold to 80 then select dirty segments which has age in range of [80, 100] as candiddates; - set candidate_ratio threshold, and select candidates based the ratio, so that we can shrink candidates to those oldest segments; - select target segment with fewest valid blocks in order to migrate blocks with minimum cost; 2. select a target victim: - select candidates beased age threshold; - set candidate_radius threshold, search candidates whose age is around source victims, searching radius should less than the radius threshold. - select target segment with most valid blocks in order to avoid migrating current target segment. 3. merge valid blocks from source victim into target victim with SSR alloctor. Test steps: - create 160 dirty segments: * half of them have 128 valid blocks per segment * left of them have 384 valid blocks per segment - run background GC Benefit: GC count and block movement count both decrease obviously: - Before: - Valid: 86 - Dirty: 1 - Prefree: 11 - Free: 6001 (6001) GC calls: 162 (BG: 220) - data segments : 160 (160) - node segments : 2 (2) Try to move 41454 blocks (BG: 41454) - data blocks : 40960 (40960) - node blocks : 494 (494) IPU: 0 blocks SSR: 0 blocks in 0 segments LFS: 41364 blocks in 81 segments - After: - Valid: 87 - Dirty: 0 - Prefree: 4 - Free: 6008 (6008) GC calls: 75 (BG: 76) - data segments : 74 (74) - node segments : 1 (1) Try to move 12813 blocks (BG: 12813) - data blocks : 12544 (12544) - node blocks : 269 (269) IPU: 0 blocks SSR: 12032 blocks in 77 segments LFS: 855 blocks in 2 segments Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: fix a bug along with pinfile in-mem segment & clean up] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-09-11Merge tag 'fsi-for-5.10' of ↵Greg Kroah-Hartman1-0/+8
git://git.kernel.org/pub/scm/linux/kernel/git/joel/fsi into char-misc-next Joel writes: FSI changes for 5.10 - Misc code cleanups. Thanks to Colin, Xu and Rikard - Features for the ASPEED FSI master * Detect connection type and routing for Tacoma * Run at full speed (200MHz) by default * Set bus speed with a parameter * CFAM reset GPIO * 23 bit addressing - Core features * Disable unused links * Set LBUS ownership * tag 'fsi-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/fsi: fsi: aspeed: Support CFAM reset GPIO fsi: aspeed: Add module param for bus divisor fsi: aspeed: Run the bus at maximum speed fsi: aspeed: Support cabled FSI dt-bindings: fsi: Document gpios fsi: scom: Constify scom_ids fsi: sbefifo: Constify sbefifo_ids fsi: master: Constify hub_master_ids fsi: master: Remove link enable read-back fsi: core: Set slave local bus ownership during init fsi: core: Disable link when slave init fails fsi: master: Add boolean parameter to link_enable function fsi: fsi-occ: fix return value check in occ_probe() fsi: aspeed: Enable 23-bit addressing fsi: master-ast-cf: fix spelling mistake "firwmare" -> "firmware"
2020-09-11Merge tag 'v5.9-rc4' into nextVinod Koul1-1/+1
Linux 5.9-rc4
2020-09-10fpga: dfl: create a dfl bus type to support DFL devicesXu Yilun1-0/+15
A new bus type "dfl" is introduced for private features which are not initialized by DFL feature drivers (dfl-fme & dfl-afu drivers). So these private features could be handled by separate driver modules. DFL feature drivers (dfl-fme, dfl-port) will create DFL devices on enumeration. DFL drivers could be registered on this bus to match these DFL devices. They are matched by dfl type & feature_id. [mdf@kernel.org: Add missing Documentation part to MAINTAINERS file] Signed-off-by: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> Signed-off-by: Russ Weight <russell.h.weight@intel.com> Reviewed-by: Tom Rix <trix@redhat.com> Acked-by: Wu Hao <hao.wu@intel.com> Signed-off-by: Moritz Fischer <mdf@kernel.org>
2020-09-10fsi: aspeed: Support CFAM reset GPIOJoel Stanley1-0/+8
Systems have a line for restting the remote CFAM. This is not part of the FSI master, but is associated with it, so it makes sense to include it in the master driver. This exposes a sysfs interface to reset the cfam, abstracting away the direction and polarity of the GPIO, as well as the timing of the reset pulse. Userspace will be blocked until the reset pulse is finished. The reset is hard coded to be in the range of (900, 1000) us. It was observed with a scope to regularly be just over 1ms. If the device tree property is not preset the driver will silently continue. Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20200728025527.174503-6-joel@jms.id.au Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-09-03iio: accel: adxl372: Add additional trigger ABI docsAlexandru Tachici1-0/+7
Document use of additional trigger supplied by driver. Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Link: https://lore.kernel.org/r/20200810093257.65929-3-alexandru.tachici@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-09-03docs: abi: iio: Use What: consistentlyGwendal Grignou1-24/+24
Change "[w|W]hat[:| ]" to What: for consistency. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Link: https://lore.kernel.org/r/20200828233156.2264689-2-gwendal@chromium.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-09-03iio: documentation: light: Add as73211 sysfs documentationChristian Eggers1-1/+25
The driver for the as73211 light sensor provides the following not yet documented sysfs entries: - in_intensity_(x|y|z)_raw - in_intensity_(x|y|z)_scale - in_intensity_sampling_frequency(_available) - in_intensity_hardwaregain(_available) - in_intensity_integration_time Signed-off-by: Christian Eggers <ceggers@arri.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-09-03Documentation: ABI: iio: fix some spelling mistakesAhmad Fatoum1-3/+3
This fixes some typos found while browsing the documentation. Cc: trivial@kernel.org Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-09-03iio: humidity: Add TI HDC20x0 supportEugene Zaikonnikov1-0/+9
Add driver support for HDC2010/2080 series devices and sysfs documentation for their heater element. HDC2010 is an integrated high-accuracy humidity and temperature sensor with very low power consumption. The device includes a resistive heating element. The temperature range is -40C to 125C with 0.2C accuracy. Humidity measurement is 0 to 100% with 2% RH accuracy. Signed-off-by: Eugene Zaikonnikov <ez@norphonic.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-14 01:29:38 +0300