| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit 3a5f3d61de657bc1c2b53b77d065c5526f982e10 ]
These two arrays are populated with data read from the I2C device
through regmap_read(), and the data is then compared with hardcoded
vendor/product ID values of supported chips.
However, the return value of regmap_read() was never checked. This is
fine, as long as the two arrays are zero-initialized, so that we don't
compare the vendor/product IDs against whatever garbage is left on the
stack.
Address this issue by zero-initializing these two arrays.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Fixes: 988156dc2fc9 ("drm: bridge: add it66121 driver")
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210827163956.27517-1-paul@crapouillou.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4034fb207e302cc0b1f304084d379640c1fb1436 ]
SPR M3UPI have the exact same event constraints as ICX, so add the
constraints.
Fixes: 2a8e51eae7c8 ("perf/x86/intel/uncore: Add Sapphire Rapids server M3UPI support")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1629991963-102621-8-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f01d7d558e1855d4aa8e927b86111846536dd476 ]
Similar to the ICX M2PCIE events, some of the SPR M2PCIE events also
have constraints. Add the constraints for SPR M2PCIE.
Fixes: f85ef898f884 ("perf/x86/intel/uncore: Add Sapphire Rapids server M2PCIe support")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1629991963-102621-7-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 67c5d44384f8dc57e1c1b3040423cfce99b578cd ]
SPR IIO events have the exact same event constraints as ICX, so add the
constraints.
Fixes: 3ba7095beaec ("perf/x86/intel/uncore: Add Sapphire Rapids server IIO support")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1629991963-102621-6-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9d756e408e080d40e7916484b00c802026e6d1ad ]
SPR CHA events have the exact same event constraints as SKX, so add the
constraints.
Fixes: 949b11381f81 ("perf/x86/intel/uncore: Add Sapphire Rapids server CHA support")
Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1629991963-102621-5-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7f16d0f3b8e2d13f940e944cd17044ca8eeb8b32 ]
The return value of sp_tx_rst_aux() is not propagated, which means
both compiler warnings and potential errors not being handled.
Fixes: 8bdfc5dae4e3 ("drm/bridge: anx7625: Add anx7625 MIPI DSI/DPI to DP")
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210818171318.1848272-1-robert.foss@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 55285e21f04517939480966164a33898c34b2af2 ]
Atm the EFI FB platform driver gets a runtime PM reference for the
associated GFX PCI device during probing the EFI FB platform device and
releases it only when the platform device gets unbound.
When fbcon switches to the FB provided by the PCI device's driver (for
instance i915/drmfb), the EFI FB will get only unregistered without the
EFI FB platform device getting unbound, keeping the runtime PM reference
acquired during the platform device probing. This reference will prevent
the PCI driver from runtime suspending the device.
Fix this by releasing the RPM reference from the EFI FB's destroy hook,
called when the FB gets unregistered.
While at it assert that pm_runtime_get_sync() didn't fail.
v2:
- Move pm_runtime_get_sync() before register_framebuffer() to avoid its
race wrt. efifb_destroy()->pm_runtime_put(). (Daniel)
- Assert that pm_runtime_get_sync() didn't fail.
- Clarify commit message wrt. platform/PCI device/driver and driver
removal vs. device unbinding.
Fixes: a6c0fd3d5a8b ("efifb: Ensure graphics device for efifb stays at PCI D0")
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v1)
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210809133146.2478382-1-imre.deak@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0133c20480b14820d43c37c0e9502da4bffcad3a ]
After most recent nightly Clang update strobemeta selftests started
failing with the following error (relevant portion of assembly included):
1624: (85) call bpf_probe_read_user_str#114
1625: (bf) r1 = r0
1626: (18) r2 = 0xfffffffe
1628: (5f) r1 &= r2
1629: (55) if r1 != 0x0 goto pc+7
1630: (07) r9 += 104
1631: (6b) *(u16 *)(r9 +0) = r0
1632: (67) r0 <<= 32
1633: (77) r0 >>= 32
1634: (79) r1 = *(u64 *)(r10 -456)
1635: (0f) r1 += r0
1636: (7b) *(u64 *)(r10 -456) = r1
1637: (79) r1 = *(u64 *)(r10 -368)
1638: (c5) if r1 s< 0x1 goto pc+778
1639: (bf) r6 = r8
1640: (0f) r6 += r7
1641: (b4) w1 = 0
1642: (6b) *(u16 *)(r6 +108) = r1
1643: (79) r3 = *(u64 *)(r10 -352)
1644: (79) r9 = *(u64 *)(r10 -456)
1645: (bf) r1 = r9
1646: (b4) w2 = 1
1647: (85) call bpf_probe_read_user_str#114
R1 unbounded memory access, make sure to bounds check any such access
In the above code r0 and r1 are implicitly related. Clang knows that,
but verifier isn't able to infer this relationship.
Yonghong Song narrowed down this "regression" in code generation to
a recent Clang optimization change ([0]), which for BPF target generates
code pattern that BPF verifier can't handle and loses track of register
boundaries.
This patch works around the issue by adding an BPF assembly-based helper
that helps to prove to the verifier that upper bound of the register is
a given constant by controlling the exact share of generated BPF
instruction sequence. This fixes the immediate issue for strobemeta
selftest.
[0] https://github.com/llvm/llvm-project/commit/acabad9ff6bf13e00305d9d8621ee8eafc1f8b08
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20211029182907.166910-1-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b7b1d02fc43925a4d569ec221715db2dfa1ce4f5 ]
The internal stream state sets the timeout to 120 seconds 2 seconds
after the creation of the flow, attach this internal stream state to the
IPS_ASSURED flag for consistent event reporting.
Before this patch:
[NEW] udp 17 30 src=10.246.11.13 dst=216.239.35.0 sport=37282 dport=123 [UNREPLIED] src=216.239.35.0 dst=10.246.11.13 sport=123 dport=37282
[UPDATE] udp 17 30 src=10.246.11.13 dst=216.239.35.0 sport=37282 dport=123 src=216.239.35.0 dst=10.246.11.13 sport=123 dport=37282
[UPDATE] udp 17 30 src=10.246.11.13 dst=216.239.35.0 sport=37282 dport=123 src=216.239.35.0 dst=10.246.11.13 sport=123 dport=37282 [ASSURED]
[DESTROY] udp 17 src=10.246.11.13 dst=216.239.35.0 sport=37282 dport=123 src=216.239.35.0 dst=10.246.11.13 sport=123 dport=37282 [ASSURED]
Note IPS_ASSURED for the flow not yet in the internal stream state.
after this update:
[NEW] udp 17 30 src=10.246.11.13 dst=216.239.35.0 sport=37282 dport=123 [UNREPLIED] src=216.239.35.0 dst=10.246.11.13 sport=123 dport=37282
[UPDATE] udp 17 30 src=10.246.11.13 dst=216.239.35.0 sport=37282 dport=123 src=216.239.35.0 dst=10.246.11.13 sport=123 dport=37282
[UPDATE] udp 17 120 src=10.246.11.13 dst=216.239.35.0 sport=37282 dport=123 src=216.239.35.0 dst=10.246.11.13 sport=123 dport=37282 [ASSURED]
[DESTROY] udp 17 src=10.246.11.13 dst=216.239.35.0 sport=37282 dport=123 src=216.239.35.0 dst=10.246.11.13 sport=123 dport=37282 [ASSURED]
Before this patch, short-lived UDP flows never entered IPS_ASSURED, so
they were already candidate flow to be deleted by early_drop under
stress.
Before this patch, IPS_ASSURED is set on regardless the internal stream
state, attach this internal stream state to IPS_ASSURED.
packet #1 (original direction) enters NEW state
packet #2 (reply direction) enters ESTABLISHED state, sets on IPS_SEEN_REPLY
paclet #3 (any direction) sets on IPS_ASSURED (if 2 seconds since the
creation has passed by).
Reported-by: Maciej Żenczykowski <zenczykowski@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 66e29fcda1824f0427966fbee2bd2c85bf362c82 ]
With idle polling, IPIs are not sent when a CPU idle, but queued
and run later from do_idle(). The default kgdb_call_nmi_hook()
implementation gets the pointer to struct pt_regs from get_irq_reqs(),
which doesn't work in that case because it was not called from the
IPI interrupt handler. Fix it by defining our own kgdb_roundup()
function which sents an IPI_ENTER_KGDB. When that IPI is received
on the target CPU kgdb_nmicallback() is called.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8e0ba125c2bf1030af3267058019ba86da96863f ]
With 64 bit kernels unwind_special() is not working because
it compares the pc to the address of the function descriptor.
Add a helper function that compares pc with the dereferenced
address. This fixes all of the backtraces on my c8000. Without
this changes, a lot of backtraces are missing in kdb or the
show-all-tasks command from /proc/sysrq-trigger.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a0961f351d82d43ab0b845304caa235dfe249ae9 ]
syzbot reported a WARNING [1] due to corrupted compressed data.
As Dmitry said, "If this is not a kernel bug, then the code should
not use WARN. WARN if for kernel bugs and is recognized as such by
all testing systems and humans."
[1] https://lore.kernel.org/r/000000000000b3586105cf0ff45e@google.com
Link: https://lore.kernel.org/r/20211025074311.130395-1-hsiangkao@linux.alibaba.com
Cc: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Reported-by: syzbot+d8aaffc3719597e8cfb4@syzkaller.appspotmail.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9cc2fa4f4a92ccc6760d764e7341be46ee8aaaa1 ]
The function end_of_stack() returns a pointer to the last entry of a
stack. For architectures like parisc where the stack grows upwards
return the pointer to the highest address in the stack.
Without this change I faced a crash on parisc, because the stackleak
functionality wrote STACKLEAK_POISON to the lowest address and thus
overwrote the first 4 bytes of the task_struct which included the
TIF_FLAGS.
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1030d681319b43869e0d5b568b9d0226652d1a6f ]
I've got the following splat after enabling preemption:
[ 3.724721] BUG: using __this_cpu_add() in preemptible [00000000] code: swapper/0/1
[ 3.734630] caller is __this_cpu_preempt_check+0x38/0x50
[ 3.740635] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.15.0-rc4-64bit+ #324
[ 3.744605] Hardware name: 9000/785/C8000
[ 3.744605] Backtrace:
[ 3.744605] [<00000000401d9d58>] show_stack+0x74/0xb0
[ 3.744605] [<0000000040c27bd4>] dump_stack_lvl+0x10c/0x188
[ 3.744605] [<0000000040c27c84>] dump_stack+0x34/0x48
[ 3.744605] [<0000000040c33438>] check_preemption_disabled+0x178/0x1b0
[ 3.744605] [<0000000040c334f8>] __this_cpu_preempt_check+0x38/0x50
[ 3.744605] [<00000000401d632c>] flush_tlb_all+0x58/0x2e0
[ 3.744605] [<00000000401075c0>] 0x401075c0
[ 3.744605] [<000000004010b8fc>] 0x4010b8fc
[ 3.744605] [<00000000401080fc>] 0x401080fc
[ 3.744605] [<00000000401d5224>] do_one_initcall+0x128/0x378
[ 3.744605] [<0000000040102de8>] 0x40102de8
[ 3.744605] [<0000000040c33864>] kernel_init+0x60/0x3a8
[ 3.744605] [<00000000401d1020>] ret_from_kernel_thread+0x20/0x28
[ 3.744605]
Fix this by moving the __inc_irq_stat() into the locked section.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2de71ee153efa93099d2ab864acffeec70a8dcd5 ]
This patch fixes the encoding for INST_RETIRED.PREC_DIST as published by Intel
(download.01.org/perfmon/) for Icelake. The official encoding
is event code 0x00 umask 0x1, a change from Skylake where it was code 0xc0
umask 0x1.
With this patch applied it is possible to run:
$ perf record -a -e cpu/event=0x00,umask=0x1/pp .....
Whereas before this would fail.
To avoid problems with tools which may use the old code, we maintain the old
encoding for Icelake.
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20211014001214.2680534-1-eranian@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f35dcaa0a8a29188ed61083d153df1454cf89d08 ]
close_range() test type conflicts with close_range() library call in
x86_64-linux-gnu/bits/unistd_ext.h. Fix it by changing the name to
core_close_range().
gcc -g -I../../../../usr/include/ close_range_test.c -o ../tools/testing/selftests/core/close_range_test
In file included from close_range_test.c:16:
close_range_test.c:57:6: error: conflicting types for ‘close_range’; have ‘void(struct __test_metadata *)’
57 | TEST(close_range)
| ^~~~~~~~~~~
../kselftest_harness.h:181:21: note: in definition of macro ‘__TEST_IMPL’
181 | static void test_name(struct __test_metadata *_metadata); \
| ^~~~~~~~~
close_range_test.c:57:1: note: in expansion of macro ‘TEST’
57 | TEST(close_range)
| ^~~~
In file included from /usr/include/unistd.h:1204,
from close_range_test.c:13:
/usr/include/x86_64-linux-gnu/bits/unistd_ext.h:56:12: note: previous declaration of ‘close_range’ with type ‘int(unsigned int, unsigned int, int)’
56 | extern int close_range (unsigned int __fd, unsigned int __max_fd,
| ^~~~~~~~~~~
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bc39a69a2ac484e6575a958567c162ef56c9f278 ]
Limit when FPU is enabled to only functions that does FPU operations for
dcn20_resource_construct, which gets called during driver
initialization.
Enabling FPU operation disables preemption. Sleeping functions(mutex
(un)lock, memory allocation using GFP_KERNEL, etc.) should not be called
when preemption is disabled.
Fixes the following case caught by enabling
CONFIG_DEBUG_ATOMIC_SLEEP in kernel config
[ 1.338434] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:281
[ 1.347395] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 197, name: systemd-udevd
[ 1.356356] CPU: 7 PID: 197 Comm: systemd-udevd Not tainted 5.13.0+ #3
[ 1.356358] Hardware name: System manufacturer System Product Name/PRIME X570-PRO, BIOS 3405 02/01/2021
[ 1.356360] Call Trace:
[ 1.356361] dump_stack+0x6b/0x86
[ 1.356366] ___might_sleep.cold+0x87/0x98
[ 1.356370] __might_sleep+0x4b/0x80
[ 1.356372] mutex_lock+0x21/0x50
[ 1.356376] smu_get_uclk_dpm_states+0x3f/0x80 [amdgpu]
[ 1.356538] pp_nv_get_uclk_dpm_states+0x35/0x50 [amdgpu]
[ 1.356711] init_soc_bounding_box+0xf9/0x210 [amdgpu]
[ 1.356892] ? create_object+0x20d/0x340
[ 1.356897] ? dcn20_resource_construct+0x46f/0xd30 [amdgpu]
[ 1.357077] dcn20_resource_construct+0x4b1/0xd30 [amdgpu]
...
Tested on: 5700XT (NAVI10 0x1002:0x731F 0x1DA2:0xE410 0xC1)
Cc: Christian König <christian.koenig@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Anson Jacob <Anson.Jacob@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 285f68afa8b20f752b0b7194d54980b5e0e27b75 ]
The following issue is observed with CONFIG_DEBUG_PREEMPT when KVM loads:
KVM: vmx: using Hyper-V Enlightened VMCS
BUG: using smp_processor_id() in preemptible [00000000] code: systemd-udevd/488
caller is set_hv_tscchange_cb+0x16/0x80
CPU: 1 PID: 488 Comm: systemd-udevd Not tainted 5.15.0-rc5+ #396
Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.0 12/17/2019
Call Trace:
dump_stack_lvl+0x6a/0x9a
check_preemption_disabled+0xde/0xe0
? kvm_gen_update_masterclock+0xd0/0xd0 [kvm]
set_hv_tscchange_cb+0x16/0x80
kvm_arch_init+0x23f/0x290 [kvm]
kvm_init+0x30/0x310 [kvm]
vmx_init+0xaf/0x134 [kvm_intel]
...
set_hv_tscchange_cb() can get preempted in between acquiring
smp_processor_id() and writing to HV_X64_MSR_REENLIGHTENMENT_CONTROL. This
is not an issue by itself: HV_X64_MSR_REENLIGHTENMENT_CONTROL is a
partition-wide MSR and it doesn't matter which particular CPU will be
used to receive reenlightenment notifications. The only real problem can
(in theory) be observed if the CPU whose id was acquired with
smp_processor_id() goes offline before we manage to write to the MSR,
the logic in hv_cpu_die() won't be able to reassign it correctly.
Reported-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20211012155005.1613352-1-vkuznets@redhat.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9dfc685e0262d4c5e44e13302f89841fa75173ca ]
syzbot reported data-races in inet_getname() multiple times,
it is time we fix this instead of pretending applications
should not trigger them.
getsockname() and getpeername() are not really considered fast path.
v2: added the missing BPF_CGROUP_RUN_SA_PROG() declaration
needed when CONFIG_CGROUP_BPF=n, as reported by
kernel test robot <lkp@intel.com>
syzbot typical report:
BUG: KCSAN: data-race in __inet_hash_connect / inet_getname
write to 0xffff888136d66cf8 of 2 bytes by task 14374 on cpu 1:
__inet_hash_connect+0x7ec/0x950 net/ipv4/inet_hashtables.c:831
inet_hash_connect+0x85/0x90 net/ipv4/inet_hashtables.c:853
tcp_v4_connect+0x782/0xbb0 net/ipv4/tcp_ipv4.c:275
__inet_stream_connect+0x156/0x6e0 net/ipv4/af_inet.c:664
inet_stream_connect+0x44/0x70 net/ipv4/af_inet.c:728
__sys_connect_file net/socket.c:1896 [inline]
__sys_connect+0x254/0x290 net/socket.c:1913
__do_sys_connect net/socket.c:1923 [inline]
__se_sys_connect net/socket.c:1920 [inline]
__x64_sys_connect+0x3d/0x50 net/socket.c:1920
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xa0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
read to 0xffff888136d66cf8 of 2 bytes by task 14408 on cpu 0:
inet_getname+0x11f/0x170 net/ipv4/af_inet.c:790
__sys_getsockname+0x11d/0x1b0 net/socket.c:1946
__do_sys_getsockname net/socket.c:1961 [inline]
__se_sys_getsockname net/socket.c:1958 [inline]
__x64_sys_getsockname+0x3e/0x50 net/socket.c:1958
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xa0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
value changed: 0x0000 -> 0xdee0
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 14408 Comm: syz-executor.3 Not tainted 5.15.0-rc3-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20211026213014.3026708-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d33cc657372366a8959f099c619a208b4c5dc664 ]
With CONFIG_DEBUG_PREEMPT we observed reports like:
BUG: using smp_processor_id() in preemptible
caller is perf_ftrace_function_call+0x6f/0x2e0
CPU: 1 PID: 680 Comm: a.out Not tainted
Call Trace:
<TASK>
dump_stack_lvl+0x8d/0xcf
check_preemption_disabled+0x104/0x110
? optimize_nops.isra.7+0x230/0x230
? text_poke_bp_batch+0x9f/0x310
perf_ftrace_function_call+0x6f/0x2e0
...
__text_poke+0x5/0x620
text_poke_bp_batch+0x9f/0x310
This telling us the CPU could be changed after task is preempted, and
the checking on CPU before preemption will be invalid.
Since now ftrace_test_recursion_trylock() will help to disable the
preemption, this patch just do the checking after trylock() to address
the issue.
Link: https://lkml.kernel.org/r/54880691-5fe2-33e7-d12f-1fa6136f5183@linux.alibaba.com
CC: Steven Rostedt <rostedt@goodmis.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Jisheng Zhang <jszhang@kernel.org>
Reported-by: Abaci <abaci@linux.alibaba.com>
Signed-off-by: Michael Wang <yun.wang@linux.alibaba.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 43ea9bd84f27d06482cc823d9749cc9dd2993bc8 ]
Firmware link offload monitoring can be made to work in 3/4 cases by
switching on firmware feature bit WLANACTIVE_OFFLOAD
- Secure power-save on
- Secure power-save off
- Open power-save on
However, with an open AP if we switch off power-saving - thus never
entering Beacon Mode Power Save - BMPS, firmware never forwards loss
of beacon upwards.
We had hoped that WLANACTIVE_OFFLOAD and some fixes for sequence numbers
would unblock this but, it hasn't and further investigation is required.
Its possible to have a complete set of Secure power-save on/off and Open
power-save on/off provided we use Linux' link monitoring mechanism.
While we debug the Open AP failure we need to fix upstream.
This reverts commit c973fdad79f6eaf247d48b5fc77733e989eb01e1.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211025093037.3966022-2-bryan.odonoghue@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit df0697801d8aa2eebfe7f0b7388879639f8fe7cc ]
If the system is resumed because of an incoming packet, the wcn36xx RX
interrupts is fired before actual resuming of the wireless/mac80211
stack, causing any received packets to be simply dropped. E.g. a ping
request causes a system resume, but is dropped and so never forwarded
to the IP stack.
This change fixes that, disabling DMA interrupts on suspend to no pass
packets until mac80211 is resumed and ready to handle them.
Note that it's not incompatible with RX irq wake.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1635150496-19290-1-git-send-email-loic.poulain@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8a27ca39478270e07baf9c09aa0c99709769ba03 ]
For packets originating from hardware scan, the channel and band is
included in the buffer descriptor (bd->rf_band & bd->rx_ch).
For 2Ghz band the channel value is directly reported in the 4-bit
rx_ch field. For 5Ghz band, the rx_ch field contains a mapping
index (given the 4-bit limitation).
The reserved0 value field is also used to extend 4-bit mapping to
5-bit mapping to support more than 16 5Ghz channels.
This change adds correct reporting of the frequency/band, that is
used in scan mechanism. And is required for 5Ghz hardware scan
support.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1634554678-7993-1-git-send-email-loic.poulain@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ca9b8f56ec089d3a436050afefd17b7237301f47 ]
Fix the missing clk_disable_unprepare() before return
from bcm_qspi_probe() in the error handling case.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20211018073413.2029081-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8ef9dc0f14ba6124c62547a4fdc59b163d8b864e ]
We got the following lockdep splat while running fstests (specifically
btrfs/003 and btrfs/020 in a row) with the new rc. This was uncovered
by 87579e9b7d8d ("loop: use worker per cgroup instead of kworker") which
converted loop to using workqueues, which comes with lockdep
annotations that don't exist with kworkers. The lockdep splat is as
follows:
WARNING: possible circular locking dependency detected
5.14.0-rc2-custom+ #34 Not tainted
------------------------------------------------------
losetup/156417 is trying to acquire lock:
ffff9c7645b02d38 ((wq_completion)loop0){+.+.}-{0:0}, at: flush_workqueue+0x84/0x600
but task is already holding lock:
ffff9c7647395468 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x650 [loop]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #5 (&lo->lo_mutex){+.+.}-{3:3}:
__mutex_lock+0xba/0x7c0
lo_open+0x28/0x60 [loop]
blkdev_get_whole+0x28/0xf0
blkdev_get_by_dev.part.0+0x168/0x3c0
blkdev_open+0xd2/0xe0
do_dentry_open+0x163/0x3a0
path_openat+0x74d/0xa40
do_filp_open+0x9c/0x140
do_sys_openat2+0xb1/0x170
__x64_sys_openat+0x54/0x90
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
-> #4 (&disk->open_mutex){+.+.}-{3:3}:
__mutex_lock+0xba/0x7c0
blkdev_get_by_dev.part.0+0xd1/0x3c0
blkdev_get_by_path+0xc0/0xd0
btrfs_scan_one_device+0x52/0x1f0 [btrfs]
btrfs_control_ioctl+0xac/0x170 [btrfs]
__x64_sys_ioctl+0x83/0xb0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
-> #3 (uuid_mutex){+.+.}-{3:3}:
__mutex_lock+0xba/0x7c0
btrfs_rm_device+0x48/0x6a0 [btrfs]
btrfs_ioctl+0x2d1c/0x3110 [btrfs]
__x64_sys_ioctl+0x83/0xb0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
-> #2 (sb_writers#11){.+.+}-{0:0}:
lo_write_bvec+0x112/0x290 [loop]
loop_process_work+0x25f/0xcb0 [loop]
process_one_work+0x28f/0x5d0
worker_thread+0x55/0x3c0
kthread+0x140/0x170
ret_from_fork+0x22/0x30
-> #1 ((work_completion)(&lo->rootcg_work)){+.+.}-{0:0}:
process_one_work+0x266/0x5d0
worker_thread+0x55/0x3c0
kthread+0x140/0x170
ret_from_fork+0x22/0x30
-> #0 ((wq_completion)loop0){+.+.}-{0:0}:
__lock_acquire+0x1130/0x1dc0
lock_acquire+0xf5/0x320
flush_workqueue+0xae/0x600
drain_workqueue+0xa0/0x110
destroy_workqueue+0x36/0x250
__loop_clr_fd+0x9a/0x650 [loop]
lo_ioctl+0x29d/0x780 [loop]
block_ioctl+0x3f/0x50
__x64_sys_ioctl+0x83/0xb0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
other info that might help us debug this:
Chain exists of:
(wq_completion)loop0 --> &disk->open_mutex --> &lo->lo_mutex
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&lo->lo_mutex);
lock(&disk->open_mutex);
lock(&lo->lo_mutex);
lock((wq_completion)loop0);
*** DEADLOCK ***
1 lock held by losetup/156417:
#0: ffff9c7647395468 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x650 [loop]
stack backtrace:
CPU: 8 PID: 156417 Comm: losetup Not tainted 5.14.0-rc2-custom+ #34
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
Call Trace:
dump_stack_lvl+0x57/0x72
check_noncircular+0x10a/0x120
__lock_acquire+0x1130/0x1dc0
lock_acquire+0xf5/0x320
? flush_workqueue+0x84/0x600
flush_workqueue+0xae/0x600
? flush_workqueue+0x84/0x600
drain_workqueue+0xa0/0x110
destroy_workqueue+0x36/0x250
__loop_clr_fd+0x9a/0x650 [loop]
lo_ioctl+0x29d/0x780 [loop]
? __lock_acquire+0x3a0/0x1dc0
? update_dl_rq_load_avg+0x152/0x360
? lock_is_held_type+0xa5/0x120
? find_held_lock.constprop.0+0x2b/0x80
block_ioctl+0x3f/0x50
__x64_sys_ioctl+0x83/0xb0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f645884de6b
Usually the uuid_mutex exists to protect the fs_devices that map
together all of the devices that match a specific uuid. In rm_device
we're messing with the uuid of a device, so it makes sense to protect
that here.
However in doing that it pulls in a whole host of lockdep dependencies,
as we call mnt_may_write() on the sb before we grab the uuid_mutex, thus
we end up with the dependency chain under the uuid_mutex being added
under the normal sb write dependency chain, which causes problems with
loop devices.
We don't need the uuid mutex here however. If we call
btrfs_scan_one_device() before we scratch the super block we will find
the fs_devices and not find the device itself and return EBUSY because
the fs_devices is open. If we call it after the scratch happens it will
not appear to be a valid btrfs file system.
We do not need to worry about other fs_devices modifying operations here
because we're protected by the exclusive operations locking.
So drop the uuid_mutex here in order to fix the lockdep splat.
A more detailed explanation from the discussion:
We are worried about rm and scan racing with each other, before this
change we'll zero the device out under the UUID mutex so when scan does
run it'll make sure that it can go through the whole device scan thing
without rm messing with us.
We aren't worried if the scratch happens first, because the result is we
don't think this is a btrfs device and we bail out.
The only case we are concerned with is we scratch _after_ scan is able
to read the superblock and gets a seemingly valid super block, so lets
consider this case.
Scan will call device_list_add() with the device we're removing. We'll
call find_fsid_with_metadata_uuid() and get our fs_devices for this
UUID. At this point we lock the fs_devices->device_list_mutex. This is
what protects us in this case, but we have two cases here.
1. We aren't to the device removal part of the RM. We found our device,
and device name matches our path, we go down and we set total_devices
to our super number of devices, which doesn't affect anything because
we haven't done the remove yet.
2. We are past the device removal part, which is protected by the
device_list_mutex. Scan doesn't find the device, it goes down and
does the
if (fs_devices->opened)
return -EBUSY;
check and we bail out.
Nothing about this situation is ideal, but the lockdep splat is real,
and the fix is safe, tho admittedly a bit scary looking.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ copy more from the discussion ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 44bee215f72f13874c0e734a0712c2e3264c0108 ]
Fix a warning reported by smatch that ret could be returned without
initialized. The dedupe operations are supposed to to return 0 for a 0
length range but the caller does not pass olen == 0. To keep this
behaviour and also fix the warning initialize ret to 0.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Sidong Yang <realwakka@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1b26ae40092b43bb6e9c5df376227382b390b953 ]
The Medion s17 series laptops have the same issue on the keyboard
as the s15 series, if skipping to call acpi_get_override_irq(), the
keyboard could work well. So put the DMI info of s17 series in the
IRQ override quirk table as well.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213031
Tested-by: dirksche <dirksche@posteo.de>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3d730ee686800d71ecc5c3cb8460dcdcdeaf38a3 ]
Let GK45 not go into BIOS for determining the AC power state.
The BIOS wrongly returns 0, so hardcode the power state to 1.
The mini PC GK45 by Besstar Tech Lld. (aka Kodlix) just runs
off AC. It does not include any batteries. Nevertheless BIOS
reports AC off:
root@kodlix:/usr/src/linux# cat /sys/class/power_supply/ADP1/online
0
root@kodlix:/usr/src/linux# modprobe acpi_dbg
root@kodlix:/usr/src/linux# tools/power/acpi/acpidbg
- find _PSR
\_SB.PCI0.SBRG.H_EC.ADP1._PSR Method 000000009283cee8 001 Args 0 Len 001C Aml 00000000f54e5f67
- execute \_SB.PCI0.SBRG.H_EC.ADP1._PSR
Evaluating \_SB.PCI0.SBRG.H_EC.ADP1._PSR
Evaluation of \_SB.PCI0.SBRG.H_EC.ADP1._PSR returned object 00000000dc08c187, external buffer length 18
[Integer] = 0000000000000000
that should be
[Integer] = 0000000000000001
Signed-off-by: Stefan Schaeckeler <schaecsn@gmx.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d18785e213866935b4c3dc0c33c3e18801ce0ce8 ]
neigh_output() reads n->nud_state and hh->hh_len locklessly.
This is fine, but we need to add annotations and document this.
We evaluate skip_cache first to avoid reading these fields
if the cache has to by bypassed.
syzbot report:
BUG: KCSAN: data-race in __neigh_event_send / ip_finish_output2
write to 0xffff88810798a885 of 1 bytes by interrupt on cpu 1:
__neigh_event_send+0x40d/0xac0 net/core/neighbour.c:1128
neigh_event_send include/net/neighbour.h:444 [inline]
neigh_resolve_output+0x104/0x410 net/core/neighbour.c:1476
neigh_output include/net/neighbour.h:510 [inline]
ip_finish_output2+0x80a/0xaa0 net/ipv4/ip_output.c:221
ip_finish_output+0x3b5/0x510 net/ipv4/ip_output.c:309
NF_HOOK_COND include/linux/netfilter.h:296 [inline]
ip_output+0xf3/0x1a0 net/ipv4/ip_output.c:423
dst_output include/net/dst.h:450 [inline]
ip_local_out+0x164/0x220 net/ipv4/ip_output.c:126
__ip_queue_xmit+0x9d3/0xa20 net/ipv4/ip_output.c:525
ip_queue_xmit+0x34/0x40 net/ipv4/ip_output.c:539
__tcp_transmit_skb+0x142a/0x1a00 net/ipv4/tcp_output.c:1405
tcp_transmit_skb net/ipv4/tcp_output.c:1423 [inline]
tcp_xmit_probe_skb net/ipv4/tcp_output.c:4011 [inline]
tcp_write_wakeup+0x4a9/0x810 net/ipv4/tcp_output.c:4064
tcp_send_probe0+0x2c/0x2b0 net/ipv4/tcp_output.c:4079
tcp_probe_timer net/ipv4/tcp_timer.c:398 [inline]
tcp_write_timer_handler+0x394/0x520 net/ipv4/tcp_timer.c:626
tcp_write_timer+0xb9/0x180 net/ipv4/tcp_timer.c:642
call_timer_fn+0x2e/0x1d0 kernel/time/timer.c:1421
expire_timers+0x135/0x240 kernel/time/timer.c:1466
__run_timers+0x368/0x430 kernel/time/timer.c:1734
run_timer_softirq+0x19/0x30 kernel/time/timer.c:1747
__do_softirq+0x12c/0x26e kernel/softirq.c:558
invoke_softirq kernel/softirq.c:432 [inline]
__irq_exit_rcu kernel/softirq.c:636 [inline]
irq_exit_rcu+0x4e/0xa0 kernel/softirq.c:648
sysvec_apic_timer_interrupt+0x69/0x80 arch/x86/kernel/apic/apic.c:1097
asm_sysvec_apic_timer_interrupt+0x12/0x20
native_safe_halt arch/x86/include/asm/irqflags.h:51 [inline]
arch_safe_halt arch/x86/include/asm/irqflags.h:89 [inline]
acpi_safe_halt drivers/acpi/processor_idle.c:109 [inline]
acpi_idle_do_entry drivers/acpi/processor_idle.c:553 [inline]
acpi_idle_enter+0x258/0x2e0 drivers/acpi/processor_idle.c:688
cpuidle_enter_state+0x2b4/0x760 drivers/cpuidle/cpuidle.c:237
cpuidle_enter+0x3c/0x60 drivers/cpuidle/cpuidle.c:351
call_cpuidle kernel/sched/idle.c:158 [inline]
cpuidle_idle_call kernel/sched/idle.c:239 [inline]
do_idle+0x1a3/0x250 kernel/sched/idle.c:306
cpu_startup_entry+0x15/0x20 kernel/sched/idle.c:403
secondary_startup_64_no_verify+0xb1/0xbb
read to 0xffff88810798a885 of 1 bytes by interrupt on cpu 0:
neigh_output include/net/neighbour.h:507 [inline]
ip_finish_output2+0x79a/0xaa0 net/ipv4/ip_output.c:221
ip_finish_output+0x3b5/0x510 net/ipv4/ip_output.c:309
NF_HOOK_COND include/linux/netfilter.h:296 [inline]
ip_output+0xf3/0x1a0 net/ipv4/ip_output.c:423
dst_output include/net/dst.h:450 [inline]
ip_local_out+0x164/0x220 net/ipv4/ip_output.c:126
__ip_queue_xmit+0x9d3/0xa20 net/ipv4/ip_output.c:525
ip_queue_xmit+0x34/0x40 net/ipv4/ip_output.c:539
__tcp_transmit_skb+0x142a/0x1a00 net/ipv4/tcp_output.c:1405
tcp_transmit_skb net/ipv4/tcp_output.c:1423 [inline]
tcp_xmit_probe_skb net/ipv4/tcp_output.c:4011 [inline]
tcp_write_wakeup+0x4a9/0x810 net/ipv4/tcp_output.c:4064
tcp_send_probe0+0x2c/0x2b0 net/ipv4/tcp_output.c:4079
tcp_probe_timer net/ipv4/tcp_timer.c:398 [inline]
tcp_write_timer_handler+0x394/0x520 net/ipv4/tcp_timer.c:626
tcp_write_timer+0xb9/0x180 net/ipv4/tcp_timer.c:642
call_timer_fn+0x2e/0x1d0 kernel/time/timer.c:1421
expire_timers+0x135/0x240 kernel/time/timer.c:1466
__run_timers+0x368/0x430 kernel/time/timer.c:1734
run_timer_softirq+0x19/0x30 kernel/time/timer.c:1747
__do_softirq+0x12c/0x26e kernel/softirq.c:558
invoke_softirq kernel/softirq.c:432 [inline]
__irq_exit_rcu kernel/softirq.c:636 [inline]
irq_exit_rcu+0x4e/0xa0 kernel/softirq.c:648
sysvec_apic_timer_interrupt+0x69/0x80 arch/x86/kernel/apic/apic.c:1097
asm_sysvec_apic_timer_interrupt+0x12/0x20
native_safe_halt arch/x86/include/asm/irqflags.h:51 [inline]
arch_safe_halt arch/x86/include/asm/irqflags.h:89 [inline]
acpi_safe_halt drivers/acpi/processor_idle.c:109 [inline]
acpi_idle_do_entry drivers/acpi/processor_idle.c:553 [inline]
acpi_idle_enter+0x258/0x2e0 drivers/acpi/processor_idle.c:688
cpuidle_enter_state+0x2b4/0x760 drivers/cpuidle/cpuidle.c:237
cpuidle_enter+0x3c/0x60 drivers/cpuidle/cpuidle.c:351
call_cpuidle kernel/sched/idle.c:158 [inline]
cpuidle_idle_call kernel/sched/idle.c:239 [inline]
do_idle+0x1a3/0x250 kernel/sched/idle.c:306
cpu_startup_entry+0x15/0x20 kernel/sched/idle.c:403
rest_init+0xee/0x100 init/main.c:734
arch_call_rest_init+0xa/0xb
start_kernel+0x5e4/0x669 init/main.c:1142
secondary_startup_64_no_verify+0xb1/0xbb
value changed: 0x20 -> 0x01
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.15.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
packets
[ Upstream commit 8c9c296adfae9ea05f655d69e9f6e13daa86fb4a ]
The VRF driver invokes netfilter for output+postrouting hooks so that users
can create rules that check for 'oif $vrf' rather than lower device name.
This is a problem when NAT rules are configured.
To avoid any conntrack involvement in round 1, tag skbs as 'untracked'
to prevent conntrack from picking them up.
This gets cleared before the packet gets handed to the ip stack so
conntrack will be active on the second iteration.
One remaining issue is that a rule like
output ... oif $vrfname notrack
won't propagate to the second round because we can't tell
'notrack set via ruleset' and 'notrack set by vrf driver' apart.
However, this isn't a regression: the 'notrack' removal happens
instead of unconditional nf_reset_ct().
I'd also like to avoid leaking more vrf specific conditionals into the
netfilter infra.
For ingress, conntrack has already been done before the packet makes it
to the vrf driver, with this patch egress does connection tracking with
lower/physical device as well.
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f604de20c0a47e0e9518940a1810193678c92fa8 ]
queue_full_warning is a pointer, so it is wrong to use sizeof to calculate
the number of characters of the string it points to. The effect is that we
only print out the first few characters of the warning string.
The correct way is to use strlen(). We don't need to add 1 to the strlen()
because we don't want to write the terminating null character to stdout.
Link: https://lkml.kernel.org/r/20211019160701.15587-1-Viktor.Rosendahl@bmw.de
Link: https://lore.kernel.org/r/8fd4bb65ef3da67feac9ce3258cdbe9824752cf1.1629198502.git.jing.yangyang@zte.com.cn
Link: https://lore.kernel.org/r/20211012025424.180781-1-davidcomponentone@gmail.com
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Viktor Rosendahl <Viktor.Rosendahl@bmw.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 345dac33f58894a56d17b92a41be10e16585ceff ]
When configuring the kernel for big-endian, we set either BE-8 or BE-32
based on the CPU architecture level. Until linux-4.4, we did not have
any ARMv7-M platform allowing big-endian builds, but now i.MX/Vybrid
is in that category, adn we get a build error because of this:
arch/arm/kernel/module-plts.c: In function 'get_module_plt':
arch/arm/kernel/module-plts.c:60:46: error: implicit declaration of function '__opcode_to_mem_thumb32' [-Werror=implicit-function-declaration]
This comes down to picking the wrong default, ARMv7-M uses BE8
like ARMv7-A does. Changing the default gets the kernel to compile
and presumably works.
https://lore.kernel.org/all/1455804123-2526139-2-git-send-email-arnd@arndb.de/
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7427f3bb49d81525b7dd1d0f7c5f6bbc752e6f0e ]
So far, glock_hash_walk took a reference on each glock it iterated over, and it
was the examiner's responsibility to drop those references. Dropping the final
reference to a glock can sleep and the examiners are called in a RCU critical
section with spin locks held, so examiners that didn't need the extra reference
had to drop it asynchronously via gfs2_glock_queue_put or similar. This wasn't
done correctly in thaw_glock which did call gfs2_glock_put, and not at all in
dump_glock_func.
Change glock_hash_walk to not take glock references at all. That way, the
examiners that don't need them won't have to bother with slow asynchronous
puts, and the examiners that do need references can take them themselves.
Reported-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 486408d690e130c3adacf816754b97558d715f46 ]
In gfs2_inode_lookup and gfs2_create_inode, we're calling
gfs2_cancel_delete_work which currently cancels any remote delete work
(delete_work_func) synchronously. This means that if the work is
currently running, it will wait for it to finish. We're doing this to
pevent a previous instance of an inode from having any influence on the
next instance.
However, delete_work_func uses gfs2_inode_lookup internally, and we can
end up in a deadlock when delete_work_func gets interrupted at the wrong
time. For example,
(1) An inode's iopen glock has delete work queued, but the inode
itself has been evicted from the inode cache.
(2) The delete work is preempted before reaching gfs2_inode_lookup.
(3) Another process recreates the inode (gfs2_create_inode). It tries
to cancel any outstanding delete work, which blocks waiting for
the ongoing delete work to finish.
(4) The delete work calls gfs2_inode_lookup, which blocks waiting for
gfs2_create_inode to instantiate and unlock the new inode =>
deadlock.
It turns out that when the delete work notices that its inode has been
re-instantiated, it will do nothing. This means that it's safe to
cancel the delete work asynchronously. This prevents the kind of
deadlock described above.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
unsigned int
[ Upstream commit e346290439609a8ac67122418ca2efbad8d0a7e7 ]
All timing calculation is done with unsigned integers, so change type
of tseg1 and alltseg to unsigned int, too.
Link: https://lore.kernel.org/all/20211013130653.1513627-1-mkl@pengutronix.de
Link: https://github.com/linux-can/can-utils/pull/314
Reported-by: Gary Bisson <bisson.gary@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
IN6_ADDR_GEN_MODE_NONE
[ Upstream commit 61e18ce7348bfefb5688a8bcd4b4d6b37c0f9b2a ]
When addr_gen_mode is set to IN6_ADDR_GEN_MODE_NONE, the link-local addr
should not be generated. But it isn't the case for GRE (as well as GRE6)
and SIT tunnels. Make it so that tunnels consider the addr_gen_mode,
especially for IN6_ADDR_GEN_MODE_NONE.
Do this in add_v4_addrs() to cover both GRE and SIT only if the addr
scope is link.
Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Acked-by: Antonio Quartulli <a@unstable.cc>
Link: https://lore.kernel.org/r/20211020200618.467342-1-ssuryaextr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b3ea5d56f212ad81328c82454829a736197ebccc ]
Currently the stacktrace on clang compiled arm kernel uses the 'lr'
register to find the first frame address from pt_regs. However, that
is wrong after calling another function, because the 'lr' register
is used by 'bl' instruction and never be recovered.
As same as gcc arm kernel, directly use the frame pointer (r11) of
the pt_regs to find the first frame address.
Note that this fixes kretprobe stacktrace issue only with
CONFIG_UNWINDER_FRAME_POINTER=y. For the CONFIG_UNWINDER_ARM,
we need another fix.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f91488ee15bd3cac467e2d6a361fc2d34d1052ae ]
syzbot is reporting kernel panic at smk_cipso_doi() due to memory
allocation fault injection [1]. The reason for need to use panic() was
not explained. But since no fix was proposed for 18 months, for now
let's use __GFP_NOFAIL for utilizing syzbot resource on other bugs.
Link: https://syzkaller.appspot.com/bug?extid=89731ccb6fec15ce1c22 [1]
Reported-by: syzbot <syzbot+89731ccb6fec15ce1c22@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e5322b9ab5f63536c41301150b7ce64605ce52cc ]
Just like we have default SMPS mode as dynamic in powersave,
we should not enable RX-diversity in powersave, to reduce
power consumption when connected to a non-MIMO AP.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017113927.fc896bc5cdaa.I1d11da71b8a5cbe921a37058d5f578f1b14a2023@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d4121376ac7a9c81a696d7558789b2f29ef3574e ]
The perf_buffer fails on system with offline cpus:
# test_progs -t perf_buffer
test_perf_buffer:PASS:nr_cpus 0 nsec
test_perf_buffer:PASS:nr_on_cpus 0 nsec
test_perf_buffer:PASS:skel_load 0 nsec
test_perf_buffer:PASS:attach_kprobe 0 nsec
test_perf_buffer:PASS:perf_buf__new 0 nsec
test_perf_buffer:PASS:epoll_fd 0 nsec
skipping offline CPU #24
skipping offline CPU #25
skipping offline CPU #26
skipping offline CPU #27
skipping offline CPU #28
skipping offline CPU #29
skipping offline CPU #30
skipping offline CPU #31
test_perf_buffer:PASS:perf_buffer__poll 0 nsec
test_perf_buffer:PASS:seen_cpu_cnt 0 nsec
test_perf_buffer:FAIL:buf_cnt got 24, expected 32
Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED
Changing the test to check online cpus instead of possible.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20211021114132.8196-2-jolsa@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c3867ab5924b7a9a0b4a117902a08669d8be7c21 ]
get_warnings_count() does fclose() using File * returned from popen().
Fix it to call pclose() as it should.
tools/testing/selftests/kvm/x86_64/mmio_warning_test
x86_64/mmio_warning_test.c: In function ‘get_warnings_count’:
x86_64/mmio_warning_test.c:87:9: warning: ‘fclose’ called on pointer returned from a mismatched allocation function [-Wmismatched-dealloc]
87 | fclose(f);
| ^~~~~~~~~
x86_64/mmio_warning_test.c:84:13: note: returned from ‘popen’
84 | f = popen("dmesg | grep \"WARNING:\" | wc -l", "r");
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 39fbef4b0f77f9c89c8f014749ca533643a37c9f ]
The following kernel crash can be triggered:
[ 89.266592] ------------[ cut here ]------------
[ 89.267427] kernel BUG at fs/buffer.c:3020!
[ 89.268264] invalid opcode: 0000 [#1] SMP KASAN PTI
[ 89.269116] CPU: 7 PID: 1750 Comm: kmmpd-loop0 Not tainted 5.10.0-862.14.0.6.x86_64-08610-gc932cda3cef4-dirty #20
[ 89.273169] RIP: 0010:submit_bh_wbc.isra.0+0x538/0x6d0
[ 89.277157] RSP: 0018:ffff888105ddfd08 EFLAGS: 00010246
[ 89.278093] RAX: 0000000000000005 RBX: ffff888124231498 RCX: ffffffffb2772612
[ 89.279332] RDX: 1ffff11024846293 RSI: 0000000000000008 RDI: ffff888124231498
[ 89.280591] RBP: ffff8881248cc000 R08: 0000000000000001 R09: ffffed1024846294
[ 89.281851] R10: ffff88812423149f R11: ffffed1024846293 R12: 0000000000003800
[ 89.283095] R13: 0000000000000001 R14: 0000000000000000 R15: ffff8881161f7000
[ 89.284342] FS: 0000000000000000(0000) GS:ffff88839b5c0000(0000) knlGS:0000000000000000
[ 89.285711] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 89.286701] CR2: 00007f166ebc01a0 CR3: 0000000435c0e000 CR4: 00000000000006e0
[ 89.287919] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 89.289138] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 89.290368] Call Trace:
[ 89.290842] write_mmp_block+0x2ca/0x510
[ 89.292218] kmmpd+0x433/0x9a0
[ 89.294902] kthread+0x2dd/0x3e0
[ 89.296268] ret_from_fork+0x22/0x30
[ 89.296906] Modules linked in:
by running the following commands:
1. mkfs.ext4 -O mmp /dev/sda -b 1024
2. mount /dev/sda /home/test
3. echo "/dev/sda" > /sys/power/resume
That happens because swsusp_check() calls set_blocksize() on the
target partition which confuses the file system:
Thread1 Thread2
mount /dev/sda /home/test
get s_mmp_bh --> has mapped flag
start kmmpd thread
echo "/dev/sda" > /sys/power/resume
resume_store
software_resume
swsusp_check
set_blocksize
truncate_inode_pages_range
truncate_cleanup_page
block_invalidatepage
discard_buffer --> clean mapped flag
write_mmp_block
submit_bh
submit_bh_wbc
BUG_ON(!buffer_mapped(bh))
To address this issue, modify swsusp_check() to open the target block
device with exclusive access.
Signed-off-by: Ye Bin <yebin10@huawei.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 14831fad73f5ac30ac61760487d95a538e6ab3cb ]
When running the following command without arm-linux-gnueabi-gcc in
one's $PATH, the following warning is observed:
$ ARCH=arm64 CROSS_COMPILE_COMPAT=arm-linux-gnueabi- make -j72 LLVM=1 mrproper
make[1]: arm-linux-gnueabi-gcc: No such file or directory
This is because KCONFIG is not run for mrproper, so CONFIG_CC_IS_CLANG
is not set, and we end up eagerly evaluating various variables that try
to invoke CC_COMPAT.
This is a similar problem to what was observed in
commit dc960bfeedb0 ("h8300: suppress error messages for 'make clean'")
Reported-by: Lucas Henneman <henneman@google.com>
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20211019223646.1146945-4-ndesaulniers@google.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b599015f044df53e93ad0a2957b615bc1a26bf73 ]
The coccinelle check report:
"./samples/bpf/xdp_redirect_cpu_user.c:397:32-38:
ERROR: application of sizeof to pointer"
Using the "strlen" to fix it.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: David Yang <davidcomponentone@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211012111649.983253-1-davidcomponentone@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2b81a5f015199f3d585ce710190a9e87714d3c1e ]
When reading the partition table on initial scan hits an I/O error the
I/O will hang with the scan_mutex held:
[<0>] do_read_cache_page+0x49b/0x790
[<0>] read_part_sector+0x39/0xe0
[<0>] read_lba+0xf9/0x1d0
[<0>] efi_partition+0xf1/0x7f0
[<0>] bdev_disk_changed+0x1ee/0x550
[<0>] blkdev_get_whole+0x81/0x90
[<0>] blkdev_get_by_dev+0x128/0x2e0
[<0>] device_add_disk+0x377/0x3c0
[<0>] nvme_mpath_set_live+0x130/0x1b0 [nvme_core]
[<0>] nvme_mpath_add_disk+0x150/0x160 [nvme_core]
[<0>] nvme_alloc_ns+0x417/0x950 [nvme_core]
[<0>] nvme_validate_or_alloc_ns+0xe9/0x1e0 [nvme_core]
[<0>] nvme_scan_work+0x168/0x310 [nvme_core]
[<0>] process_one_work+0x231/0x420
and trying to delete the controller will deadlock as it tries to grab
the scan mutex:
[<0>] nvme_mpath_clear_ctrl_paths+0x25/0x80 [nvme_core]
[<0>] nvme_remove_namespaces+0x31/0xf0 [nvme_core]
[<0>] nvme_do_delete_ctrl+0x4b/0x80 [nvme_core]
As we're now properly ordering the namespace list there is no need to
hold the scan_mutex in nvme_mpath_clear_ctrl_paths() anymore.
And we always need to kick the requeue list as the path will be marked
as unusable and I/O will be requeued _without_ a current path.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2351ead99ce9164fb42555aee3f96af84c4839e9 ]
When removing a port, all its controllers are being removed, but there
are queues on the port that doesn't belong to any controller (during
connection time). This causes a use-after-free bug for any command
that dereferences req->port (like in nvmet_alloc_ctrl). Those queues
should be destroyed before freeing the port via configfs. Destroy
the remaining queues after the accept_work was cancelled guarantees
that no new queue will be created.
Signed-off-by: Israel Rukshin <israelr@nvidia.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fcf73a804c7d6bbf0ea63531c6122aa363852e04 ]
When removing a port, all its controllers are being removed, but there
are queues on the port that doesn't belong to any controller (during
connection time). This causes a use-after-free bug for any command
that dereferences req->port (like in nvmet_alloc_ctrl). Those queues
should be destroyed before freeing the port via configfs. Destroy the
remaining queues after the RDMA-CM was destroyed guarantees that no
new queue will be created.
Signed-off-by: Israel Rukshin <israelr@nvidia.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e3e19dcc4c416d65f99f13d55be2b787f8d0050e ]
When a port is removed through configfs, any connected controllers
are starting teardown flow asynchronously and can still send commands.
This causes a use-after-free bug for any command that dereferences
req->port (like in nvmet_parse_io_cmd).
To fix this, wait for all the teardown scheduled works to complete
(like release_work at rdma/tcp drivers). This ensures there are no
active controllers when the port is eventually removed.
Signed-off-by: Israel Rukshin <israelr@nvidia.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 68e3871dcd6e547f6c47454492bc452356cb9eac ]
When selecting between levels in the force performance levels interface
sclk (gfxclk) was not set correctly for all levels. Select the proper
sclk settings for all levels.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1726
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1ecda6393db4be44aba27a243e648dc98c9b92e3 ]
The mailbox is initialized after the interrupt handler is installed. As
the firmware is loaded and started even later, it should not happen that
the interrupt occurs without the mailbox being initialized.
As the Linux Driver Verification project (linuxtesting.org) keeps
reporting this as an error, add a check to ignore interrupts before the
mailbox is initialized to fix this potential null pointer dereference.
Reported-by: Yuri Savinykh <s02190703@gse.cs.msu.ru>
Reported-by: Nadezda Lutovinova <lutovinova@ispras.ru>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
