| Age | Commit message (Collapse) | Author | Files | Lines |
|
In the situations where the DWC3 gadget stops active transfers, once
calling the dwc3_gadget_giveback(), there is a chance where a function
driver can queue a new USB request in between the time where the dwc3
lock has been released and re-aquired. This occurs after we've already
issued an ENDXFER command. When the stop active transfers continues
to remove USB requests from all dep lists, the newly added request will
also be removed, while controller still has an active TRB for it.
This can lead to the controller accessing an unmapped memory address.
Fix this by ensuring parameters to prevent EP queuing are set before
calling the stop active transfers API.
Fixes: ae7e86108b12 ("usb: dwc3: Stop active transfers before halting the controller")
Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
Link: https://lore.kernel.org/r/1615507142-23097-1-git-send-email-wcheng@codeaurora.org
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The if condition in irq_matrix_reserve() can be much simpler.
While at it fix a typo in the comment.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210211070953.5914-1-jgross@suse.com
|
|
tcpm-source-psy- does not invoke power_supply_changed API when
one of the published power supply properties is changed.
power_supply_changed needs to be called to notify
userspace clients(uevents) and kernel clients.
Fixes: f2a8aa053c176 ("typec: tcpm: Represent source supply through power_supply")
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210317181249.1062995-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove the unused "u32 vdo[3]" part in the tps6598x_rx_identity_reg
struct. This helps avoid "failed to register partner" errors which
happen when tps6598x_read_partner_identity() fails because the
amount of data read is 12 bytes smaller than the struct size.
Note that vdo[3] is already in usb_pd_identity and hence
shouldn't be added to tps6598x_rx_identity_reg as well.
Fixes: f6c56ca91b92 ("usb: typec: Add the Product Type VDOs to struct usb_pd_identity")
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Elias Rudberg <mail@eliasrudberg.se>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210311124710.6563-1-mail@eliasrudberg.se
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Matthias reports that the Amazon Kindle automatically removes its
emulated media if it doesn't receive another SCSI command within about
one second after a SYNCHRONIZE CACHE. It does so even when the host
has sent a PREVENT MEDIUM REMOVAL command. The reason for this
behavior isn't clear, although it's not hard to make some guesses.
At any rate, the results can be unexpected for anyone who tries to
access the Kindle in an unusual fashion, and in theory they can lead
to data loss (for example, if one file is closed and synchronized
while other files are still in the middle of being written).
To avoid such problems, this patch creates a new usb-storage quirks
flag telling the driver always to issue a REQUEST SENSE following a
SYNCHRONIZE CACHE command, and adds an unusual_devs entry for the
Kindle with the flag set. This is sufficient to prevent the Kindle
from doing its automatic unload, without interfering with proper
operation.
Another possible way to deal with this would be to increase the
frequency of TEST UNIT READY polling that the kernel normally carries
out for removable-media storage devices. However that would increase
the overall load on the system and it is not as reliable, because the
user can override the polling interval. Changing the driver's
behavior is safer and has minimal overhead.
CC: <stable@vger.kernel.org>
Reported-and-tested-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20210317190654.GA497856@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When gadget is disconnected, running sequence is like this.
. composite_disconnect
. Call trace:
usb_string_copy+0xd0/0x128
gadget_config_name_configuration_store+0x4
gadget_config_name_attr_store+0x40/0x50
configfs_write_file+0x198/0x1f4
vfs_write+0x100/0x220
SyS_write+0x58/0xa8
. configfs_composite_unbind
. configfs_composite_bind
In configfs_composite_bind, it has
"cn->strings.s = cn->configuration;"
When usb_string_copy is invoked. it would
allocate memory, copy input string, release previous pointed memory space,
and use new allocated memory.
When gadget is connected, host sends down request to get information.
Call trace:
usb_gadget_get_string+0xec/0x168
lookup_string+0x64/0x98
composite_setup+0xa34/0x1ee8
If gadget is disconnected and connected quickly, in the failed case,
cn->configuration memory has been released by usb_string_copy kfree but
configfs_composite_bind hasn't been run in time to assign new allocated
"cn->configuration" pointer to "cn->strings.s".
When "strlen(s->s) of usb_gadget_get_string is being executed, the dangling
memory is accessed, "BUG: KASAN: use-after-free" error occurs.
Cc: stable@vger.kernel.org
Signed-off-by: Jim Lin <jilin@nvidia.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Link: https://lore.kernel.org/r/1615444961-13376-1-git-send-email-macpaul.lin@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently udc->ud.tcp_rx is being assigned twice, the second assignment
is incorrect, it should be to udc->ud.tcp_tx instead of rx. Fix this.
Fixes: 46613c9dfa96 ("usbip: fix vudc usbip_sockfd_store races leading to gpf")
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: stable <stable@vger.kernel.org>
Addresses-Coverity: ("Unused value")
Link: https://lore.kernel.org/r/20210311104445.7811-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
MODULE_SUPPORTED_DEVICE was added in pre-git era and never was
implemented. We can safely remove it, because the kernel has grown
to have many more reliable mechanisms to determine if device is
supported or not.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fix from Thomas Bogendoerfer:
"Fix for fdt alignment when image is compressed"
* tag 'mips-fixes_5.12_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: vmlinux.lds.S: Fix appended dtb not properly aligned
|
|
Vladimir Oltean says:
====================
DSA/switchdev documentation fixups
These are some small fixups after the recently merged documentation
update.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
automatically
Since commit 9d5ef190e561 ("net: dsa: automatically bring up DSA master
when opening user port"), DSA manages the administrative status of the
host port automatically. Update the configuration steps to reflect this.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
"make htmldocs" complains:
configuration.rst:165: WARNING: duplicate label networking/dsa/configuration:single port, other instance in (...)
configuration.rst:212: WARNING: duplicate label networking/dsa/configuration:bridge, other instance in (...)
configuration.rst:252: WARNING: duplicate label networking/dsa/configuration:gateway, other instance in (...)
And for good reason, because the "single port", "bridge" and "gateway"
use cases are replicated twice, once for normal taggers and twice for
DSA_TAG_PROTO_NONE. So when trying to reference these sections via a
hyperlink such as:
https://www.kernel.org/doc/html/latest/networking/dsa/configuration.html#single-port
it will always reference the first occurrence, and never the second one.
This change makes the "single port", "bridge" and "gateway"
configuration examples consistent with the formatting used in the
"Configuration showcases" subsection.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
"make htmldocs" produces these warnings:
Documentation/networking/dsa/dsa.rst:468: WARNING: Unexpected indentation.
Documentation/networking/dsa/dsa.rst:477: WARNING: Block quote ends without a blank line; unexpected unindent.
Fixes: 8411abbcad8e ("Documentation: networking: dsa: mention integration with devlink")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Even though this is clear from the context, it is nice to actually be
grammatically correct.
Fixes: 0f22ad45f47c ("Documentation: networking: switchdev: clarify device driver behavior")
Reported-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It looks like "make htmldocs" produces this warning:
Documentation/networking/switchdev.rst:482: WARNING: Unexpected indentation.
Fixes: 0f22ad45f47c ("Documentation: networking: switchdev: clarify device driver behavior")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Naveen Mamindlapalli says:
====================
refactor code related to npc install flow
This patchset refactors and cleans up the code associated with the
npc install flow API, specifically to eliminate different code paths
while installing MCAM rules by AF and PF. This makes the code easier
to understand and maintain. Also added support for multi channel NIX
promisc entry.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The mbox handler npc_install_flow returns ENOTSUPP for unsupported
flow keys. This patch modifies the return value to AF driver defined
error code for debugging purpose.
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A mcam rule described by mcam_rule struct has all the info
such as the hardware MCAM entry number, match criteria and
corresponding action etc. All mcam rules are stored in a
linked list mcam->rules. When adding/updating a rule to the
mcam->rules it is checked if a rule already exists for the
mcam entry. If the rule already exists, the same rule is
updated instead of creating new rule. This way only one
mcam_rule exists for the only one default unicast entry
installed by AF. But a PF/VF can get different NIXLF
(or default unicast entry number) after a attach-detach-attach
sequence. When that happens mcam_rules list end up with two
default unicast rules. Fix the problem by deleting the default
unicast rule list node always when disabling mcam rules.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use npc_install_flow mailbox API for installing the default promisc
and broadcast match entries. Earlier these entries were installed
using low level npc_config_mcam_entry API, which does not store these
rules and is not available when the rules are dumped using debugfs.
Added chan_mask field to npc_install_flow_req to calculate channel
mask when channel count is greater than 1 and configure the channel
mask in entry kw_mask.
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds support for multi channel NIX promisc entry. Packets sent
on all those channels by the host should be received by the interface to
which those channels belong. Channel count, if greater than 1, should be
power of 2 as only one promisc entry is available for the interface. Key
mask is modified such that incoming packets from channel base to channel
count are directed to the same pci function.
Signed-off-by: Nalla, Pradeep <pnalla@marvell.com>
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch refactors npc_install_flow function to install AF
installed default MCAM entries similar to other MCAM entries
installed by PF/VF. As a result the code would be more readable
and easy to maintain. Modified npc_verify_entry and npc_verify_channel
to properly check MCAM rules installed by AF.
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal framework fix from Daniel Lezcano:
"Fix NULL pointer access when the cooling device transition stats
table failed to allocate due to a big number of states (Manaf
Meethalavalappu Pallikunhi)"
* tag 'thermal-v5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/core: Add NULL pointer check before using cooling device stats
|
|
mlxsw: Allow 802.1d and .1ad VxLAN bridges to coexist on Spectrum>=2
Ido Schimmel says:
====================
This patchset allows user space to simultaneously configure both 802.1d
and 802.1ad VxLAN bridges on Spectrum-2 and later ASICs. 802.1ad VxLAN
bridges are still forbidden on Spectrum-1.
The reason for the current limitation is that up until now the EtherType
that was pushed to decapsulated VxLAN packets was a property of the
tunnel port, of which there is only one. This meant that a 802.1ad VxLAN
bridge could not be configured if the tunnel port was already configured
to push a 802.1q tag.
This patchset improves the situation by making two changes. First,
decapsulated packets are marked as having their EtherType decided by the
egress port. Second, local ports member in the bridge (e.g., swp1) are
configured to set the correct egress EtherType.
Patchset overview:
Patch #1 adds a register required for the first change
Patches #2-#3 add the register required for the second change and a
corresponding API
Patch #4 prepares the driver for the split in behavior between
Spectrum-1 and later ASICs
Patch #5 performs the two above mentioned changes to allow the driver to
support simultaneous 802.1ad and 802.1d VxLAN bridges on Spectrum-2 and
later ASICs
Patch #6 adds a selftest
Patch #7 removes a selftest that verified the limitation that was lifted
by this patchset
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
q_in_vni_veto.sh is not needed anymore because VxLAN with an 802.1ad
bridge and VxLAN with an 802.1d bridge can coexist.
Remove the test.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Configure VxLAN with an 802.1ad bridge and VxLAN with an 802.1d bridge
at the same time in same switch, verify that traffic passed as expected.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently only one EtherType can be configured for pushing in tunnels
because EtherType is configured using SPVID.et_vlan for tunnel port.
This behavior is forbidden by comparing mlxsw_sp_nve_config struct for
each new tunnel, the struct contains 'ethertype' field which means that
only one EtherType is legal at any given time. Remove 'ethertype' field to
allow creating VxLAN devices with different bridges.
To allow using several types of VxLAN bridges at the same time, the
EtherType should be determined at the egress port. This behavior is
achieved by setting SPVID to decide which EtherType to push at egress and
for each local_port which is member in 802.1ad bridge, set SPEVET.et_vlan
to ether_type1 (i.e., 0x88A8).
Use switchdev_ops->init() to set different mlxsw_sp_bridge_ops for
different ASICs in order to be able to split the behavior when port joins /
leaves an 802.1ad bridge in different ASICs.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A subsequent patch will need to implement different set of operations
when a port joins / leaves an 802.1ad bridge, based on the ASIC type.
Prepare for this change by allowing to initialize the bridge module
based on the ASIC type via 'struct mlxsw_sp_switchdev_ops'.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A subsequent patch will cause decapsulated packets to have their EtherType
determined by the egress port. Add mlxsw_sp_port_egress_ethtype_set() which
will be called when a port joins an 802.1ad bridge, so that it will set an
802.1ad EtherType on decapsulated packets transmitted through it, instead
of the default 802.1q EtherType.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
SPEVET configures which EtherType to push at egress for packets incoming
through a local port for which 'SPVID.egr_et_set' is set.
The next patches will use SPEVET to configure EtherType 0x88A8 and
0x8100 for local ports member in 802.1ad and 802.1q bridges,
respectively. This allows using dual VxLAN bridges (802.1d and 802.1ad at
the same time).
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
SPVID.egr_et_set=1 means that when VLAN is pushed at ingress (for untagged
packets or for QinQ push mode) then the EtherType is decided at the egress
port.
The next patches will use this field for VxLAN devices (tunnel port) in
order to allow using dual VxLAN bridges (802.1d and 802.1ad at the same
time).
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Álvaro Fernández Rojas says:
====================
net: dsa: b53: support legacy tags
Legacy Broadcom tags are needed for older switches.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
These tags are used on BCM5325, BCM5365 and BCM63xx switches.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for legacy Broadcom tags, which are similar to DSA_TAG_PROTO_BRCM.
These tags are used on BCM5325, BCM5365 and BCM63xx switches.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
First round of fixes for 5.12-rc:
* HE (802.11ax) elements can be extended, handle that
* fix locking in network namespace changes that was
broken due to the RTNL-redux work
* various other small fixes
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
s/procesing/processing/
s/comparations/comparisons/
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Building perf on ppc causes:
In file included from util/intel-pt-decoder/intel-pt-insn-decoder.c:15:
util/intel-pt-decoder/../../../arch/x86/lib/insn.c:14:10: fatal error: asm/inat.h: No such file or directory
14 | #include <asm/inat.h> /*__ignore_sync_check__ */
| ^~~~~~~~~~~~
Restore the relative include paths so that the compiler can find the
headers.
Fixes: 93281c4a9657 ("x86/insn: Add an insn_decode() API")
Reported-by: Ian Rogers <irogers@google.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Ian Rogers <irogers@google.com>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lkml.kernel.org/r/20210317150858.02b1bbc8@canb.auug.org.au
|
|
The rpmsg_create_ept function is invoked when the device is opened.
As only one endpoint must be created per device. It is not possible to
open the same device twice. But there is nothing to prevent multi open.
Return -EBUSY when device is already opened to have a generic error
instead of relying on the back-end to potentially detect the error.
Without this patch for instance the GLINK driver return -EBUSY while
the virtio bus return -ENOSPC.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20210311140413.31725-7-arnaud.pouliquen@foss.st.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Instantiate the rpmsg_char device on virtio RPMsg bus creation.
This provides the capability, with the RPMSG_CREATE_EPT_IOCTL ioctl,
to create RPMsg char device endpoints relying on the
rpmsg_chrdev_create_eptdev API.
Notice that the created endpoints are attached to the rpmsg_ctldev
device, but not associated to a channel.
As consequence, the endpoint source and destination addresses have to
been specified and there is no channel creation and no name service
announcement to inform the remote side.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20210311140413.31725-6-arnaud.pouliquen@foss.st.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
When the endpoint device is created by the application, a destination
address is specified in the rpmsg_channel_info structure. Since the
rpmsg_endpoint structure does not store the destination address,
this destination address must be specified when sending a message.
Replaces rpmsg_send with rpmsg_sendto to allow to specify the
destination address. This implementation is requested for compatibly with
some rpmsg backends like the virtio backend.
For this, the GLINK an SMD drivers have been updated to support the
rpmsg_sendto, even if the destination address is ignored for these
backends. For these drivers, the rpmsg_send and rpmsg_trysend ops are
preserved to avoid breaking the legacy.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210311140413.31725-5-arnaud.pouliquen@foss.st.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Add a description of the IOCTLs and provide information on the default
value of the source and destination addresses.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20210311140413.31725-4-arnaud.pouliquen@foss.st.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
As the RPMSG_ADDR_ANY is a valid src or dst address that can be set by
user applications, migrate its definition in user API.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20210311140413.31725-3-arnaud.pouliquen@foss.st.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
To be coherent with the other functions which are prefixed by
rpmsg_chrdev, rename the rpmsg_char_init function.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20210311140413.31725-2-arnaud.pouliquen@foss.st.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
The K3 PRUs are 32-bit processors and in general have some limitations
in using the standard ARMv8 memcpy function for loading firmware segments,
so the driver already uses a custom memcpy implementation. This added
logic however is limited to only IRAMs at the moment, but the loading
into Data RAMs is not completely ok either and does generate a kernel
crash for unaligned accesses.
Fix these crashes by removing the existing IRAM logic limitation and
extending the custom memcpy usage to Data RAMs as well for all K3 SoCs.
Fixes: 1d39f4d19921 ("remoteproc: pru: Add support for various PRU cores on K3 AM65x SoCs")
Signed-off-by: Suman Anna <s-anna@ti.com>
Link: https://lore.kernel.org/r/20210315205859.19590-1-s-anna@ti.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
The sensor *is* in fact used and does report temperature.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Acked-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210225213119.116550-1-konrad.dybcio@somainline.org
|
|
BCM63xx switches are present on bcm63xx and bmips devices.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
According to Synopsis DesignWare EQoS Databook, the Clock Domain Cross
synchronization error is introduced tue to the clock(GMII Tx/Rx clock)
being different at the capture as compared to the PTP
clock(clk_ptp_ref_i) that is used to generate the time.
The CDC synchronization error is almost equal to 2 times the clock
period of the PTP clock(clk_ptp_ref_i).
On a Intel Tigerlake platform (with Marvell 88E2110 external PHY):
Before applying this patch (with CDC synchronization error):
ptp4l[64.044]: rms 8 max 13 freq +30877 +/- 11 delay 216 +/- 0
ptp4l[65.047]: rms 13 max 20 freq +30869 +/- 17 delay 213 +/- 0
ptp4l[66.050]: rms 12 max 20 freq +30857 +/- 11 delay 213 +/- 0
ptp4l[67.052]: rms 11 max 22 freq +30849 +/- 10 delay 215 +/- 0
ptp4l[68.055]: rms 10 max 16 freq +30853 +/- 13 delay 215 +/- 0
ptp4l[69.057]: rms 7 max 13 freq +30848 +/- 9 delay 216 +/- 0
ptp4l[70.060]: rms 8 max 13 freq +30846 +/- 10 delay 216 +/- 0
ptp4l[71.063]: rms 9 max 15 freq +30836 +/- 8 delay 218 +/- 0
After applying this patch (CDC syncrhonization error is taken care of):
ptp4l[61.516]: rms 773 max 824 freq +31526 +/- 158 delay 200 +/- 0
ptp4l[62.519]: rms 427 max 596 freq +31668 +/- 39 delay 198 +/- 0
ptp4l[63.522]: rms 113 max 206 freq +31482 +/- 57 delay 198 +/- 0
ptp4l[64.525]: rms 40 max 56 freq +31316 +/- 29 delay 200 +/- 0
ptp4l[65.528]: rms 47 max 56 freq +31255 +/- 17 delay 200 +/- 0
ptp4l[66.531]: rms 26 max 36 freq +31246 +/- 9 delay 200 +/- 0
ptp4l[67.534]: rms 12 max 18 freq +31254 +/- 12 delay 202 +/- 0
ptp4l[68.537]: rms 7 max 12 freq +31263 +/- 10 delay 202 +/- 0
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: Wong Vee Khee <vee.khee.wong@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
AM64 EVM board has a micro USB 2.0 AB connector and the USB0_VBUS is
connected with a resistor divider in between. USB0_DRVVBUS pin is muxed
between USB0_DRVVBUS and GPIO1_79 signals.
Add the corresponding properties and set the pinmux mode for USB subsystem
in the evm dts file.
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Link: https://lore.kernel.org/r/20210317043007.18272-3-a-govindraju@ti.com
|
|
Add DT node for the single USB subsystem in main dtsi file.
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Link: https://lore.kernel.org/r/20210317043007.18272-2-a-govindraju@ti.com
|
|
The ct_state validate should not only check the mask bit and also
check mask_bit & key_bit..
For the +new+est case example, The 'new' and 'est' bits should be
set in both state_mask and state flags. Or the -new-est case also
will be reject by kernel.
When Openvswitch with two flows
ct_state=+trk+new,action=commit,forward
ct_state=+trk+est,action=forward
A packet go through the kernel and the contrack state is invalid,
The ct_state will be +trk-inv. Upcall to the ovs-vswitchd, the
finally dp action will be drop with -new-est+trk.
Fixes: 1bcc51ac0731 ("net/sched: cls_flower: Reject invalid ct_state flags rules")
Fixes: 3aed8b63336c ("net/sched: cls_flower: validate ct_state for invalid and reply flags")
Signed-off-by: wenxu <wenxu@ucloud.cn>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Jon Maloy says:
====================
tipc: cleanups and simplifications
We do a number of cleanups and simplifications, especially regarding
call signatures in the binding table. This makes the code easier to
understand and serves as preparation for upcoming functional additions.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|