| Age | Commit message (Collapse) | Author | Files | Lines |
|
The 32-bit #VC handler has no GHCB and can only handle CPUID exit codes.
It is needed by the early boot code to handle #VC exceptions raised in
verify_cpu() and to get the position of the C-bit.
But the CPUID information comes from the hypervisor which is untrusted
and might return results which trick the guest into the no-SEV boot path
with no C-bit set in the page-tables. All data written to memory would
then be unencrypted and could leak sensitive data to the hypervisor.
Add sanity checks to the 32-bit boot #VC handler to make sure the
hypervisor does not pretend that SEV is not enabled.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210312123824.306-7-joro@8bytes.org
|
|
Add a #VC exception handler which is used when the kernel still executes
in protected mode. This boot-path already uses CPUID, which will cause #VC
exceptions in an SEV-ES guest.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210312123824.306-6-joro@8bytes.org
|
|
Antoine Tenart says:
====================
net: xps: improve the xps maps handling
This series aims at fixing various issues with the xps code, including
out-of-bound accesses and use-after-free. While doing so we try to
improve the xps code maintainability and readability.
The main change is moving dev->num_tc and dev->nr_ids in the xps maps, to
avoid out-of-bound accesses as those two fields can be updated after the
maps have been allocated. This allows further reworks, to improve the
xps code readability and allow to stop taking the rtnl lock when
reading the maps in sysfs. The maps are moved to an array in net_device,
which simplifies the code a lot.
One future improvement may be to remove the use of xps_map_mutex from
net/core/dev.c, but that may require extra care.
Thanks!
Antoine
Since v3:
- Removed the 3 patches about the rtnl lock and __netif_set_xps_queue
as there are extra issues. Those patches were not tied to the
others, and I'll see want can be done as a separate effort.
- One small fix in patch 12.
Since v2:
- Patches 13-16 are new to the series.
- Fixed another issue I found while preparing v3 (use after free of
old xps maps).
- Kept the rtnl lock when calling netdev_get_tx_queue and
netdev_txq_to_tc.
- Use get_device/put_device when using the sb_dev.
- Take the rtnl lock in mlx5 and virtio_net when calling
netif_set_xps_queue.
- Fixed a coding style issue.
Since v1:
- Reordered the patches to improve readability and avoid introducing
issues in between patches.
- Use dev_maps->nr_ids to allocate the mask in xps_queue_show but
still default to nr_cpu_ids/dev->num_rx_queues in xps_queue_show
when dev_maps hasn't been allocated yet for backward
compatibility.:w
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In __netif_set_xps_queue, old map entries from the old dev_maps are
freed but their corresponding entry in the old dev_maps aren't NULLed.
Fix this.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When setting up an new dev_maps in __netif_set_xps_queue, we remove and
free maps from unused CPUs/rx-queues near the end of the function; by
calling remove_xps_queue. However it's possible those maps are also part
of the old not-freed-yet dev_maps, which might be used concurrently.
When that happens, a map can be freed while its corresponding entry in
the old dev_maps table isn't NULLed, leading to: "BUG: KASAN:
use-after-free" in different places.
This fixes the map freeing logic for unused CPUs/rx-queues, to also NULL
the map entries from the old dev_maps table.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Most of the xps_cpus_show and xps_rxqs_show functions share the same
logic. Having it in two different functions does not help maintenance.
This patch moves their common logic into a new function, xps_queue_show,
to improve this.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now that nr_ids and num_tc are stored in the xps dev_maps, which are RCU
protected, we do not have the need to protect the maps in the rtnl lock.
Move the rtnl unlock up so we reduce the rtnl locking section.
We also increase the reference count on the subordinate device if any,
as we don't want this device to be freed while we use it (now that the
rtnl lock isn't protecting it in the whole function).
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Improve the readability of the loop removing tx-queue from unused
CPUs/rx-queues in __netif_set_xps_queue. The change should only be
cosmetic.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds an helper, xps_copy_dev_maps, to copy maps from dev_maps
to new_dev_maps at a given index. The logic should be the same, with an
improved code readability and maintenance.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move the xps maps (xps_cpus_map and xps_rxqs_map) to an array in
net_device. That will simplify a lot the code removing the need for lots
of if/else conditionals as the correct map will be available using its
offset in the array.
This should not modify the xps maps behaviour in any way.
Suggested-by: Alexander Duyck <alexander.duyck@gmail.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove the xps possible_mask. It was an optimization but we can just
loop from 0 to nr_ids now that it is embedded in the xps dev_maps. That
simplifies the code a bit.
Suggested-by: Alexander Duyck <alexander.duyck@gmail.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Embed nr_ids (the number of cpu for the xps cpus map, and the number of
rxqs for the xps cpus map) in dev_maps. That will help not accessing out
of bound memory if those values change after dev_maps was allocated.
Suggested-by: Alexander Duyck <alexander.duyck@gmail.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The xps cpus/rxqs map is accessed using dev->num_tc, which is used when
allocating the map. But later updates of dev->num_tc can lead to having
a mismatch between the maps and how they're accessed. In such cases the
map values do not make any sense and out of bound accesses can occur
(that can be easily seen using KASAN).
This patch aims at fixing this by embedding num_tc into the maps, using
the value at the time the map is created. This brings two improvements:
- The maps can be accessed using the embedded num_tc, so we know for
sure we won't have out of bound accesses.
- Checks can be made before accessing the maps so we know the values
retrieved will make sense.
We also update __netif_set_xps_queue to conditionally copy old maps from
dev_maps in the new one only if the number of traffic classes from both
maps match.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make the implementations of xps_cpus_show and xps_rxqs_show to converge,
as the two share the same logic but diverted over time. This should not
modify their behaviour but will help future changes and improve
maintenance.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In net-sysfs, get_netdev_queue_index returns an unsigned int. Some of
its callers use an unsigned long to store the returned value. Update the
code to be consistent, this should only be cosmetic.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use bitmap_zalloc instead of zalloc_cpumask_var in xps_cpus_show to
align with xps_rxqs_show. This will improve maintenance and allow us to
factorize the two functions. The function should behave the same.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix the following warning:
drivers/interconnect/bulk.c:63: warning: expecting prototype for
icc_bulk_set(). Prototype was for icc_bulk_set_bw() instead
Link: https://lore.kernel.org/r/20210318163415.30941-1-georgi.djakov@linaro.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
|
|
BCM4908 has only 1 RGMII reg for controlling port 7.
Fixes: 73b7a6047971 ("net: dsa: bcm_sf2: support BCM4908's integrated switch")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Simple macro like REG_RGMII_CNTRL_P() is insufficient as:
1. It doesn't validate port argument
2. It doesn't support chipsets with non-lineral RGMII regs layout
Missing port validation could result in getting register offset from out
of array. Random memory -> random offset -> random reads/writes. It
affected e.g. BCM4908 for REG_RGMII_CNTRL_P(7).
Fixes: a78e86ed586d ("net: dsa: bcm_sf2: Prepare for different register layouts")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
__dev_alloc_name(), when supplied with a name containing '%d',
will search for the first available device number to generate a
unique device name.
Since commit ff92741270bf8b6e78aa885f166b68c7a67ab13a ("net:
introduce name_node struct to be used in hashlist") network
devices may have alternate names. __dev_alloc_name() does take
these alternate names into account, possibly generating a name
that is already taken and failing with -ENFILE as a result.
This demonstrates the bug:
# rmmod dummy 2>/dev/null
# ip link property add dev lo altname dummy0
# modprobe dummy numdummies=1
modprobe: ERROR: could not insert 'dummy': Too many open files in system
Instead of creating a device named dummy1, modprobe fails.
Fix this by checking all the names in the d->name_node list, not just d->name.
Signed-off-by: Jiri Bohac <jbohac@suse.cz>
Fixes: ff92741270bf ("net: introduce name_node struct to be used in hashlist")
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add device tree support to b53_mmap.c while keeping platform devices support.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Mohammad Athari Bin Ismail says:
====================
net: stmmac: EST interrupts and ethtool
This patchset adds support for handling EST interrupts and reporting EST
errors. Additionally, the errors are added into ethtool statistic.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Below EST errors are added into ethtool statistic:
1) Constant Gate Control Error (CGCE):
The counter "mtl_est_cgce" increases everytime CGCE interrupt is
triggered.
2) Head-of-Line Blocking due to Scheduling (HLBS):
The counter "mtl_est_hlbs" increases everytime HLBS interrupt is
triggered.
3) Head-of-Line Blocking due to Frame Size (HLBF):
The counter "mtl_est_hlbf" increases everytime HLBF interrupt is
triggered.
4) Base Time Register error (BTRE):
The counter "mtl_est_btre" increases everytime BTRE interrupt is
triggered but BTRL not reaches maximum value of 15.
5) Base Time Register Error Loop Count (BTRL) reaches maximum value:
The counter "mtl_est_btrlm" increases everytime BTRE interrupt is
triggered and BTRL value reaches maximum value of 15.
Please refer to MTL_EST_STATUS register in DesignWare Cores Ethernet
Quality-of-Service Databook for more detail explanation.
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Co-developed-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Enabled EST related interrupts as below:
1) Constant Gate Control Error (CGCE)
2) Head-of-Line Blocking due to Scheduling (HLBS)
3) Head-of-Line Blocking due to Frame Size (HLBF).
4) Base Time Register error (BTRE)
5) Switch to S/W owned list Complete (SWLC)
For HLBS, the user will get the info of all the queues that shows this
error. For HLBF, the user will get the info of all the queue with the
latest frame size which causes the error. Frame size 0 indicates no
error.
The ISR handling takes place when EST feature is enabled by user.
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Co-developed-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 92c8c16f3457 ("powerpc/embedded6xx: Remove C2K board support")
removed last selector of CONFIG_MV64X60.
As it is not a user selectable config item, all references to it
are stale. Remove them.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Ong Boon Leong says:
====================
stmmac: add VLAN priority based RX steering
The current tc flower implementation in stmmac supports both L3 and L4
filter offloading. This patch adds the support of VLAN priority based
RX frame steering into different Rx Queues.
The patches have been tested on both configuration test (include L3/L4)
and traffic test (multi VLAN ping streams with RX Frame Steering) below:-
> tc qdisc delete dev eth0 ingress
> tc qdisc del dev eth0 parent root 2&> /dev/null
> tc qdisc del dev eth0 parent ffff: 2&> /dev/null
> tc qdisc add dev eth0 ingress
> tc filter add dev eth0 parent ffff: protocol ip flower dst_ip 192.168.0.1 \
src_ip 192.168.1.1 ip_proto tcp dst_port 5201 src_port 6201 action drop
> tc filter add dev eth0 parent ffff: protocol ip flower dst_ip 192.168.0.2 \
src_ip 192.168.1.2 ip_proto tcp dst_port 5202 src_port 6202 action drop
> tc filter show dev eth0 ingress
filter parent ffff: protocol ip pref 49151 flower chain 0
filter parent ffff: protocol ip pref 49151 flower chain 0 handle 0x1
eth_type ipv4
ip_proto tcp
dst_ip 192.168.0.2
src_ip 192.168.1.2
dst_port 5202
src_port 6202
in_hw in_hw_count 1
action order 1: gact action drop
random type none pass val 0
index 2 ref 1 bind 1
filter parent ffff: protocol ip pref 49152 flower chain 0
filter parent ffff: protocol ip pref 49152 flower chain 0 handle 0x1
eth_type ipv4
ip_proto tcp
dst_ip 192.168.0.1
src_ip 192.168.1.1
dst_port 5201
src_port 6201
in_hw in_hw_count 1
action order 1: gact action drop
random type none pass val 0
index 1 ref 1 bind 1
> tc qdisc delete dev eth0 ingress
> tc qdisc del dev eth0 parent root 2&> /dev/null
> tc qdisc del dev eth0 parent ffff: 2&> /dev/null
> tc qdisc add dev eth0 ingress
> tc qdisc add dev eth0 root mqprio num_tc 4 \
map 0 1 2 3 0 0 0 0 0 0 0 0 0 0 0 0 \
queues 1@0 1@1 1@2 1@3 hw 0
> tc filter add dev eth0 parent ffff: protocol 802.1Q flower vlan_prio 0 hw_tc 3
> tc filter add dev eth0 parent ffff: protocol 802.1Q flower vlan_prio 1 hw_tc 2
> tc filter add dev eth0 parent ffff: protocol 802.1Q flower vlan_prio 2 hw_tc 1
> tc filter add dev eth0 parent ffff: protocol 802.1Q flower vlan_prio 3 hw_tc 0
> tc filter show dev eth0 ingress
filter parent ffff: protocol 802.1Q pref 49149 flower chain 0
filter parent ffff: protocol 802.1Q pref 49149 flower chain 0 handle 0x1 hw_tc 0
vlan_prio 3
in_hw in_hw_count 1
filter parent ffff: protocol 802.1Q pref 49150 flower chain 0
filter parent ffff: protocol 802.1Q pref 49150 flower chain 0 handle 0x1 hw_tc 1
vlan_prio 2
in_hw in_hw_count 1
filter parent ffff: protocol 802.1Q pref 49151 flower chain 0
filter parent ffff: protocol 802.1Q pref 49151 flower chain 0 handle 0x1 hw_tc 2
vlan_prio 1
in_hw in_hw_count 1
filter parent ffff: protocol 802.1Q pref 49152 flower chain 0
filter parent ffff: protocol 802.1Q pref 49152 flower chain 0 handle 0x1 hw_tc 3
vlan_prio 0
in_hw in_hw_count 1
> tc qdisc delete dev eth0 ingress
> ip address flush dev eth0
> ip address add 169.254.1.11/24 dev eth0
> ip link delete dev eth0.vlan1 2> /dev/null
> ip link add link eth0 name eth0.vlan1 type vlan id 1
> ip address flush dev eth0.vlan1 2> /dev/null
> ip address add 169.254.11.11/24 dev eth0.vlan1
> ip link delete dev eth0.vlan2 2> /dev/null
> ip link add link eth0 name eth0.vlan2 type vlan id 2
> ip address flush dev eth0.vlan2 2> /dev/null
> ip address add 169.254.12.11/24 dev eth0.vlan2
> ip link delete dev eth0.vlan3 2> /dev/null
> ip link add link eth0 name eth0.vlan3 type vlan id 3
> ip address flush dev eth0.vlan3 2> /dev/null
> ip address add 169.254.13.11/24 dev eth0.vlan3
> ip link delete dev eth0.vlan4 2> /dev/null
> ip link add link eth0 name eth0.vlan4 type vlan id 4
> ip address flush dev eth0.vlan4 2> /dev/null
> ip address add 169.254.14.11/24 dev eth0.vlan4
> ip address flush dev eth0
> ip address add 169.254.1.22/24 dev eth0
> ip link delete dev eth0.vlan1 2> /dev/null
> ip link add link eth0 name eth0.vlan1 type vlan id 1
> ip address flush dev eth0.vlan1 2> /dev/null
> ip address add 169.254.11.22/24 dev eth0.vlan1
> ip link delete dev eth0.vlan2 2> /dev/null
> ip link add link eth0 name eth0.vlan2 type vlan id 2
> ip address flush dev eth0.vlan2 2> /dev/null
> ip address add 169.254.12.22/24 dev eth0.vlan2
> ip link delete dev eth0.vlan3 2> /dev/null
> ip link add link eth0 name eth0.vlan3 type vlan id 3
> ip address flush dev eth0.vlan3 2> /dev/null
> ip address add 169.254.13.22/24 dev eth0.vlan3
> ip link delete dev eth0.vlan4 2> /dev/null
> ip link add link eth0 name eth0.vlan4 type vlan id 4
> ip address flush dev eth0.vlan4 2> /dev/null
> ip address add 169.254.14.22/24 dev eth0.vlan4
> mkdir -p /sys/fs/cgroup/net_prio/grp0
> echo eth0 0 > /sys/fs/cgroup/net_prio/grp0/net_prio.ifpriomap
> echo eth0.vlan1 0 > /sys/fs/cgroup/net_prio/grp0/net_prio.ifpriomap
> mkdir -p /sys/fs/cgroup/net_prio/grp1
> echo eth0 0 > /sys/fs/cgroup/net_prio/grp1/net_prio.ifpriomap
> echo eth0.vlan2 1 > /sys/fs/cgroup/net_prio/grp1/net_prio.ifpriomap
> mkdir -p /sys/fs/cgroup/net_prio/grp2
> echo eth0 0 > /sys/fs/cgroup/net_prio/grp2/net_prio.ifpriomap
> echo eth0.vlan3 2 > /sys/fs/cgroup/net_prio/grp2/net_prio.ifpriomap
> mkdir -p /sys/fs/cgroup/net_prio/grp3
> echo eth0 0 > /sys/fs/cgroup/net_prio/grp3/net_prio.ifpriomap
> echo eth0.vlan4 3 > /sys/fs/cgroup/net_prio/grp3/net_prio.ifpriomap
> tc qdisc del dev eth0 parent root 2&> /dev/null
> tc qdisc del dev eth0 parent ffff: 2&> /dev/null
> tc qdisc add dev eth0 ingress
> tc qdisc add dev eth0 root mqprio num_tc 4 map 0 1 2 3 0 0 0 0 0 0 0 0 0 0 0 0 queues 1@0 1@1 1@2 1@3 hw 0
> tc filter add dev eth0 parent ffff: protocol 802.1Q flower vlan_prio 0 hw_tc 0
> tc filter add dev eth0 parent ffff: protocol 802.1Q flower vlan_prio 1 hw_tc 1
> tc filter add dev eth0 parent ffff: protocol 802.1Q flower vlan_prio 2 hw_tc 2
> tc filter add dev eth0 parent ffff: protocol 802.1Q flower vlan_prio 3 hw_tc 3
> ip link set eth0.vlan1 type vlan egress-qos-map 0:0
> ip link set eth0.vlan2 type vlan egress-qos-map 1:1
> ip link set eth0.vlan3 type vlan egress-qos-map 2:2
> ip link set eth0.vlan4 type vlan egress-qos-map 3:3
> tc filter show dev eth0 ingress
filter parent ffff: protocol 802.1Q pref 49149 flower chain 0
filter parent ffff: protocol 802.1Q pref 49149 flower chain 0 handle 0x1 hw_tc 3
vlan_prio 3
in_hw in_hw_count 1
filter parent ffff: protocol 802.1Q pref 49150 flower chain 0
filter parent ffff: protocol 802.1Q pref 49150 flower chain 0 handle 0x1 hw_tc 2
vlan_prio 2
in_hw in_hw_count 1
filter parent ffff: protocol 802.1Q pref 49151 flower chain 0
filter parent ffff: protocol 802.1Q pref 49151 flower chain 0 handle 0x1 hw_tc 1
vlan_prio 1
in_hw in_hw_count 1
filter parent ffff: protocol 802.1Q pref 49152 flower chain 0
filter parent ffff: protocol 802.1Q pref 49152 flower chain 0 handle 0x1 hw_tc 0
vlan_prio 0
in_hw in_hw_count 1
> echo 1 > /proc/irq/131/smp_affinity
> echo 1 > /proc/irq/132/smp_affinity
> echo 4 > /proc/irq/133/smp_affinity
> echo 4 > /proc/irq/134/smp_affinity
> echo 4 > /proc/irq/135/smp_affinity
> echo 4 > /proc/irq/136/smp_affinity
> echo 2 > /proc/irq/137/smp_affinity
> echo 2 > /proc/irq/138/smp_affinity
> ping -i 0.001 169.254.11.22 2&> /dev/null &
> PID1="$!"
> echo $PID1 > /sys/fs/cgroup/net_prio/grp0/cgroup.procs
> ping -i 0.001 169.254.12.22 2&> /dev/null &
> PID2="$!"
> echo $PID2 > /sys/fs/cgroup/net_prio/grp1/cgroup.procs
> ping -i 0.001 169.254.13.22 2&> /dev/null &
> PID3="$!"
> echo $PID3 > /sys/fs/cgroup/net_prio/grp2/cgroup.procs
> ping -i 0.001 169.254.14.22 2&> /dev/null &
> PID4="$!"
> echo $PID4 > /sys/fs/cgroup/net_prio/grp3/cgroup.procs
> ping -i 0.001 169.254.11.11 2&> /dev/null &
> PID1="$!"
> echo $PID1 > /sys/fs/cgroup/net_prio/grp0/cgroup.procs
> ping -i 0.001 169.254.12.11 2&> /dev/null &
> PID2="$!"
> echo $PID2 > /sys/fs/cgroup/net_prio/grp1/cgroup.procs
> ping -i 0.001 169.254.13.11 2&> /dev/null &
> PID3="$!"
> echo $PID3 > /sys/fs/cgroup/net_prio/grp2/cgroup.procs
> ping -i 0.001 169.254.14.11 2&> /dev/null &
> PID4="$!"
> echo $PID4 > /sys/fs/cgroup/net_prio/grp3/cgroup.procs
> watch -n 0.5 -d "cat /proc/interrupts | grep eth0"
131: 251918 41 0 0 IR-PCI-MSI 477184-edge eth0:rx-0
132: 18969 1 0 0 IR-PCI-MSI 477185-edge eth0:tx-0
133: 0 0 295872 0 IR-PCI-MSI 477186-edge eth0:rx-1
134: 0 0 16136 0 IR-PCI-MSI 477187-edge eth0:tx-1
135: 0 0 288042 0 IR-PCI-MSI 477188-edge eth0:rx-2
136: 0 0 16135 0 IR-PCI-MSI 477189-edge eth0:tx-2
137: 0 211177 0 0 IR-PCI-MSI 477190-edge eth0:rx-3
138: 2 16144 0 0 IR-PCI-MSI 477191-edge eth0:tx-3
139: 0 0 0 0 IR-PCI-MSI 477192-edge eth0:rx-4
140: 0 0 0 0 IR-PCI-MSI 477193-edge eth0:tx-4
141: 0 0 0 0 IR-PCI-MSI 477194-edge eth0:rx-5
142: 0 0 0 0 IR-PCI-MSI 477195-edge eth0:tx-5
143: 0 0 0 0 IR-PCI-MSI 477196-edge eth0:rx-6
144: 0 0 0 0 IR-PCI-MSI 477197-edge eth0:tx-6
145: 0 0 0 0 IR-PCI-MSI 477198-edge eth0:rx-7
146: 0 0 0 0 IR-PCI-MSI 477199-edge eth0:tx-7
157: 0 0 0 0 IR-PCI-MSI 477210-edge eth0:safety-ue
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We extend tc flower to support configuration of VLAN priority-based RX
frame steering hardware offloading.
To map VLAN <PCP> to Traffic Class <TC>:
$ tc filter add dev <IFNAME> parent ffff: protocol 802.1Q flower \
vlan_prio <PCP> hw_tc <TC>
Note: <TC> < N whereby "tc qdisc ... num_tc N ..."
To delete all tc flower configurations:
$ tc qdisc delete dev <IFNAME> ingress
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current tc_add_flow() and tc_del_flow() use hardware L3 & L4 filters
as offloading. The number of L3/L4 filters is read from L3L4FNUM field
from MAC_HW_Feature1 register and is used to alloc priv->tc_entries[].
For RX frame steering based on VLAN priority offloading, we use
MAC_RXQ_CTRL2 & MAC_RXQ_CTRL3 registers and all VLAN priority level
can be configured independent from L3 & L4 filters.
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Hariprasad Kelam says:
====================
octeontx2: miscellaneous fixes
This series of patches fixes various issues related to NPC MCAM entry
management, debugfs, devlink, CGX LMAC mapping, RSS config etc
Change-log:
v2:
Fixed below review comments
- corrected Fixed tag syntax with 12 digits SHA1
and providing space between SHA1 and subject line
- remove code improvement patch
- make commit description more clear
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Initialize l4_key_offset variable to fix uninitialized
variable compiler warning.
Fixes: b9b7421a01d8 ("octeontx2-af: Support ESP/AH RSS hashing")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
unmapping npc counter works in a way by traversing all mcam
entries to find which mcam rule is associated with counter.
But loop cursor variable 'entry' is not incremented before
checking next mcam entry which resulting in infinite loop.
This in turn hogs the kworker thread forever and no other
mbox message is processed by AF driver after that.
Fix this by updating entry value before checking next
mcam entry.
Fixes: a958dd59f9ce ("octeontx2-af: Map or unmap NPC MCAM entry and counter")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
RSS configuration can not be get/set when interface is in down state
as they required mbox communication. RSS enable flag status
is used for set/get configuration. Current code do not clear the
RSS enable flag on interface down which lead to mbox error while
trying to set/get RSS configuration.
Fixes: 85069e95e531 ("octeontx2-pf: Receive side scaling support")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Current devlink code try to free already freed irqs as the
irq_allocate flag is not cleared after free leading to kernel
crash while removing rvu driver. The patch fixes the irq free
sequence and clears the irq_allocate flag on free.
Fixes: 7304ac4567bc ("octeontx2-af: Add mailbox IRQ and msg handlers")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
CGX receive buffer size is a constant value and
cannot be read from CGX0 block always since
CGX0 may not enabled everytime. Hence return CGX
receive buffer size from first enabled CGX block
instead of CGX0.
Fixes: 6e54e1c5399a ("octeontx2-af: cn10K: MTU configuration")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The MKEX profile describes what packet fields need to be extracted from
the input packet and how to place those packet fields in the output key
for MCAM matching. The MKEX profile can be in a way where higher layer
packet fields can overwrite lower layer packet fields in output MCAM
Key.
Hence MKEX profile is always ensured that there are no overlaps between
any of the layers. But the commit 42006910b5ea
("octeontx2-af: cleanup KPU config data") introduced TX TOS field which
overlaps with DMAC in MCAM key.
This led to AF driver returning error when TX rule is installed with
DMAC as match criteria since DMAC gets overwritten and cannot be
supported. This patch fixes the issue by removing TOS field from MKEX TX
profile.
Fixes: 42006910b5ea ("octeontx2-af: cleanup KPU config data")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
With the existing rsrc_alloc's format, there is misalignment for the
pcifunc entries whose VF's index is a double digit. This patch fixes
this.
pcifunc NPA NIX0 NIX1 SSO GROUP SSOWS
TIM CPT0 CPT1 REE0 REE1
PF0:VF0 8 5
PF0:VF1 9 3
PF0:VF10 18 10
PF0:VF11 19 8
PF0:VF12 20 11
PF0:VF13 21 9
PF0:VF14 22 12
PF0:VF15 23 10
PF1 0 0
Fixes: 23205e6d06d4 ("octeontx2-af: Dump current resource provisioning status")
Signed-off-by: Rakesh Babu <rsaladi2@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the ETHTOOL_GRXCLSRLALL ioctl ethtool uses
below structure to read number of rules from the driver.
struct ethtool_rxnfc {
__u32 cmd;
__u32 flow_type;
__u64 data;
struct ethtool_rx_flow_spec fs;
union {
__u32 rule_cnt;
__u32 rss_context;
};
__u32 rule_locs[0];
};
Driver must not modify rule_cnt member. But currently driver
modifies it by modifying rss_context. Hence fix it by using a
local variable.
Fixes: 81a4362016e7 ("octeontx2-pf: Add RSS multi group support")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Describe the /proc/PID/loginuid interface in Documentation/ABI/stable that
was added 2008-03-13 in commit 1e0bd7550ea9 ("[PATCH] export sessionid
alongside the loginuid in procfs")
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Describe the /proc/PID/loginuid interface in Documentation/ABI/stable that
was added 2005-02-01 by commit 1e2d1492e178 ("[PATCH] audit: handle
loginuid through proc")
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"There are still regressions being found and fixed in the zoned mode
and subpage code, the rest are fixes for bugs reported by users.
Regressions:
- subpage block support:
- readahead works on the proper block size
- fix last page zeroing
- zoned mode:
- linked list corruption for tree log
Fixes:
- qgroup leak after falloc failure
- tree mod log and backref resolving:
- extent buffer cloning race when resolving backrefs
- pin deleted leaves with active tree mod log users
- drop debugging flag from slab cache"
* tag 'for-5.12-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: always pin deleted leaves when there are active tree mod log users
btrfs: fix race when cloning extent buffer during rewind of an old root
btrfs: fix slab cache flags for free space tree bitmap
btrfs: subpage: make readahead work properly
btrfs: subpage: fix wild pointer access during metadata read failure
btrfs: zoned: fix linked list corruption after log root tree allocation failure
btrfs: fix qgroup data rsv leak caused by falloc failure
btrfs: track qgroup released data in own variable in insert_prealloc_file_extent
btrfs: fix wrong offset to zero out range beyond i_size
|
|
Commit 1dae796aabf6 ("btrfs: inode: sink parameter start and len to
check_data_csum()") replaced the start parameter to check_data_csum()
with page_offset(), but page_offset() is not meaningful for direct I/O
pages. Bring back the start parameter.
Fixes: 265d4ac03fdf ("btrfs: sink parameter start and len to check_data_csum")
CC: stable@vger.kernel.org # 5.11+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Pull VFIO fixes from Alex Williamson:
- Fix 32-bit issue with new unmap-all flag (Steve Sistare)
- Various Kconfig changes for better coverage (Jason Gunthorpe)
- Fix to batch pinning support (Daniel Jordan)
* tag 'vfio-v5.12-rc4' of git://github.com/awilliam/linux-vfio:
vfio/type1: fix vaddr_get_pfns() return in vfio_pin_page_external()
vfio: Depend on MMU
ARM: amba: Allow some ARM_AMBA users to compile with COMPILE_TEST
vfio-platform: Add COMPILE_TEST to VFIO_PLATFORM
vfio: IOMMU_API should be selected
vfio/type1: fix unmap all on ILP32
|
|
Pull xfs fixes from Darrick Wong:
"A couple of minor corrections for the new idmapping functionality, and
a fix for a theoretical hang that could occur if we decide to abort a
mount after dirtying the quota inodes.
Summary:
- Fix quota accounting on creat() when id mapping is enabled
- Actually reclaim dirty quota inodes when mount fails
- Typo fixes for documentation
- Restrict both bulkstat calls on idmapped/namespaced mounts"
* tag 'xfs-5.12-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: also reject BULKSTAT_SINGLE in a mount user namespace
docs: ABI: Fix the spelling oustanding to outstanding in the file sysfs-fs-xfs
xfs: force log and push AIL to clear pinned inodes when aborting mount
xfs: fix quota accounting when a mount is idmapped
|
|
Add files maintaned by the audit subsystem.
Files from arch/*/*/*audit*.[ch] and arch/x86/include/asm/audit.h were not
added due to concern of the list not holding up over time. There exist
already exceptions that caused the need for this specificity.
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
fast_switch_enabled
Note that sugov_update_next_freq() may return false, that means the
caller sugov_fast_switch() will do nothing except fast switch check.
Similarly, sugov_deferred_update() also has unnecessary operations
of raw_spin_{lock,unlock} in sugov_update_single_freq() for that case.
So, let's call sugov_update_next_freq() before the fast switch check
to avoid unnecessary behaviors above. Accordingly, update interface
definition to sugov_deferred_update() and remove sugov_fast_switch()
since we will call cpufreq_driver_fast_switch() directly instead.
Signed-off-by: Yue Hu <huyue2@yulong.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Enable Hygon Fam18h RAPL support for the power capping framework.
Signed-off-by: Pu Wen <puwen@hygon.cn>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Runtime resuming a device upfront in the genpd_prepare() callback,
to check if there is a wakeup pending for it, seems like an
unnecessary thing to do.
The PM core already manages these kind of things in a common way in
__device_suspend(), via calling pm_runtime_barrier() and
pm_wakeup_pending().
Therefore, let's simply drop this behaviour from genpd_prepare().
Note that, this change is applicable only for devices that are
attached to a genpd that has the GENPD_FLAG_ACTIVE_WAKEUP set
(Renesas, Mediatek, and Rockchip platforms). Moreover, a driver
that needs to restore power for its device to re-configure it
for a system wakeup, may still call pm_runtime_get_sync(), for
example, to do this.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Naveen Mamindlapalli says:
====================
Add tc hardware offloads
This patch series adds support for tc hardware offloads.
Patch #1 adds support for offloading flows that matches IP tos and IP
protocol which will be used by tc hw offload support. Also
added ethtool n-tuple filter to code to offload the flows
matching the above fields.
Patch #2 adds tc flower hardware offload support on ingress traffic.
Patch #3 adds TC flower offload stats.
Patch #4 adds tc TC_MATCHALL egress ratelimiting offload.
* tc flower hardware offload in PF driver
The driver parses the flow match fields and actions received from the tc
subsystem and adds/delete MCAM rules for the same. Each flow contains set
of match and action fields. If the action or fields are not supported,
the rule cannot be offloaded to hardware. The tc uses same set of MCAM
rules allocated for ethtool n-tuple filters. So, at a time only one entity
can offload the flows to hardware, they're made mutually exclusive in the
driver.
Following match and actions are supported.
Match: Eth dst_mac, EtherType, 802.1Q {vlan_id,vlan_prio}, vlan EtherType,
IP proto {tcp,udp,sctp,icmp,icmp6}, IPv4 tos, IPv4{dst_ip,src_ip},
L4 proto {dst_port|src_port number}.
Actions: drop, accept, vlan pop, redirect to another port on the device.
The Hardware stats are also supported. Currently only packet counter stats
are updated.
* tc egress rate limiting support
Added TC-MATCHALL classifier offload with police action applied for all
egress traffic on the specified interface.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add TC_MATCHALL egress ratelimiting offload support with POLICE
action for entire traffic going out of the interface.
Eg: To ratelimit egress traffic to 100Mbps
$ ethtool -K eth0 hw-tc-offload on
$ tc qdisc add dev eth0 clsact
$ tc filter add dev eth0 egress matchall skip_sw \
action police rate 100Mbit burst 16Kbit
HW supports a max burst size of ~128KB.
Only one ratelimiting filter can be installed at a time.
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support to get the stats for tc flower flows that are
offloaded to hardware. To support this feature, added a
new AF mbox handler which returns the MCAM entry stats
for a flow that has hardware stat counter enabled.
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|