summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-03-23arm64: socfpga: merge Agilex and N5X into ARCH_INTEL_SOCFPGAKrzysztof Kozlowski8-28/+13
Agilex, N5X and Stratix 10 share all quite similar arm64 hard cores and SoC-part. Up to a point that N5X uses the same DTSI as Agilex. From the Linux kernel point of view these are flavors of the same architecture so there is no need for three top-level arm64 architectures. Simplify this by merging all three architectures into ARCH_INTEL_SOCFPGA and dropping the other ARCH* arm64 Kconfig entries. The side effect is that the INTEL_STRATIX10_SERVICE will now be available for both 32-bit and 64-bit Intel SoCFPGA, even though it is used only for 64-bit. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2021-03-23EDAC: altera: merge ARCH_SOCFPGA and ARCH_STRATIX10Krzysztof Kozlowski2-7/+12
Simplify 32-bit and 64-bit Intel SoCFPGA Kconfig options by having only one for both of them. This the common practice for other platforms. Additionally, the ARCH_SOCFPGA is too generic as SoCFPGA designs come from multiple vendors. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2021-03-23clk: socfpga: merge ARCH_SOCFPGA and ARCH_STRATIX10Krzysztof Kozlowski1-2/+1
Simplify 32-bit and 64-bit Intel SoCFPGA Kconfig options by having only one for both of them. This the common practice for other platforms. Additionally, the ARCH_SOCFPGA is too generic as SoCFPGA designs come from multiple vendors. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2021-03-23clk: socfpga: build together Stratix 10, Agilex and N5X clock driversKrzysztof Kozlowski2-7/+6
On a multiplatform kernel there is little benefit in splitting each clock driver per platform because space savings are minimal. Such split also complicates the code, especially after adding compile testing. Build all arm64 Intel SoCFPGA clocks together with one entry in Makefile. This also removed duplicated line in the Makefile (selecting common part of clocks per platform). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2021-03-23net: stmmac: merge ARCH_SOCFPGA and ARCH_STRATIX10Krzysztof Kozlowski1-2/+2
Simplify 32-bit and 64-bit Intel SoCFPGA Kconfig options by having only one for both of them. This the common practice for other platforms. Additionally, the ARCH_SOCFPGA is too generic as SoCFPGA designs come from multiple vendors. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2021-03-23mfd: altera: merge ARCH_SOCFPGA and ARCH_STRATIX10Krzysztof Kozlowski1-2/+2
Simplify 32-bit and 64-bit Intel SoCFPGA Kconfig options by having only one for both of them. This the common practice for other platforms. Additionally, the ARCH_SOCFPGA is too generic as SoCFPGA designs come from multiple vendors. The side effect is that the MFD_ALTERA_A10SR will now be available for both 32-bit and 64-bit Intel SoCFPGA, even though it is used only for 32-bit. Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2021-03-23ARM: socfpga: introduce common ARCH_INTEL_SOCFPGAKrzysztof Kozlowski7-7/+15
Simplify 32-bit and 64-bit Intel SoCFPGA Kconfig options by having only one for both of them. This the common practice for other platforms. Additionally, the ARCH_SOCFPGA is too generic as SoCFPGA designs come from multiple vendors. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2021-03-23clk: socfpga: allow building N5X clocks with ARCH_N5XKrzysztof Kozlowski4-2/+10
The Intel's eASIC N5X (ARCH_N5X) architecture shares a lot with Agilex (ARCH_AGILEX) so it uses the same socfpga_agilex.dtsi, with minor changes. Also the clock drivers are the same. However the clock drivers won't be build without ARCH_AGILEX. One could assume that ARCH_N5X simply depends on ARCH_AGILEX but this was not modeled in Kconfig. In current stage the ARCH_N5X is simply unbootable. Add a separate Kconfig entry for clocks used by both ARCH_N5X and ARCH_AGILEX so the necessary objects will be built if either of them is selected. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2021-03-23block: clear GD_NEED_PART_SCAN later in bdev_disk_changedChris Chiu1-2/+2
The GD_NEED_PART_SCAN is set by bdev_check_media_change to initiate a partition scan while removing a block device. It should be cleared after blk_drop_paritions because blk_drop_paritions could return -EBUSY and then the consequence __blkdev_get has no chance to do delete_partition if GD_NEED_PART_SCAN already cleared. It causes some problems on some card readers. Ex. Realtek card reader 0bda:0328 and 0bda:0158. The device node of the partition will not disappear after the memory card removed. Thus the user applications can not update the device mapping correctly. BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1920874 Signed-off-by: Chris Chiu <chris.chiu@canonical.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20210323085219.24428-1-chris.chiu@canonical.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-03-23media: staging: atomisp: reduce kernel stack usageArnd Bergmann3-36/+33
The atomisp_set_fmt() function has multiple copies of the large v4l2_format structure on its stack, resulting in a warning about excessive stack usage in some rare randconfig builds. drivers/staging/media/atomisp/pci/atomisp_cmd.c:5600:5: error: stack frame size of 1084 bytes in function 'atomisp_set_fmt' [-Werror,-Wframe-larger-than=] Of this structure, only three members in the 'fmt.pix' member are used, so simplify it by using the smaller v4l2_pix_format structure directly. This reduces the stack usage to 612 bytes, and it could be reduced further by only storing the three members that are used. Link: https://lore.kernel.org/linux-media/20210226140524.3478346-1-arnd@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-23media: staging: media: omap4iss: code style - avoid macro argument ↵Nikolay Kyx1-8/+8
precedence issues This patch fixes the following checkpatch.pl check: CHECK: Macro argument 'i' may be better as '(i)' to avoid precedence issues in file iss_regs.h Link: https://lore.kernel.org/linux-media/20210221195308.1451-1-knv418@gmail.com Signed-off-by: Nikolay Kyx <knv418@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-23usb: gadget: pch_udc: Provide a GPIO line used on Intel Minnowboard (v1)Andy Shevchenko1-14/+57
Intel Minnowboard (v1) uses SCH GPIO line SUS7 (i.e. 12) for VBUS sense. Provide a DMI based quirk to have it's being used. Fixes: e20849a8c883 ("usb: gadget: pch_udc: Convert to use GPIO descriptors") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210323153626.54908-7-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23usb: gadget: pch_udc: Initialize device pointer before useAndy Shevchenko1-2/+3
During conversion to use GPIO descriptors the device pointer, which is applied to devm_gpiod_get(), is not yet initialized. Move initialization in the ->probe() in order to have it set before use. Fixes: e20849a8c883 ("usb: gadget: pch_udc: Convert to use GPIO descriptors") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210323153626.54908-6-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23usb: gadget: pch_udc: Revert d3cb25a12138 completelyAndy Shevchenko1-4/+13
The commit d3cb25a12138 ("usb: gadget: udc: fix spin_lock in pch_udc") obviously was not thought through and had made the situation even worse than it was before. Two changes after almost reverted it. but a few leftovers have been left as it. With this revert d3cb25a12138 completely. While at it, narrow down the scope of unlocked section to prevent potential race when prot_stall is assigned. Fixes: d3cb25a12138 ("usb: gadget: udc: fix spin_lock in pch_udc") Fixes: 9903b6bedd38 ("usb: gadget: pch-udc: fix lock") Fixes: 1d23d16a88e6 ("usb: gadget: pch_udc: reorder spin_[un]lock to avoid deadlock") Cc: Iago Abal <mail@iagoabal.eu> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210323153626.54908-5-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23usb: gadget: pch_udc: Move pch_udc_init() to satisfy kernel docAndy Shevchenko1-1/+2
Kernel doc and the content described by it shouldn't be torn apart. Otherwise validator is not happy: .../pch_udc.c:573: warning: expecting prototype for pch_udc_reconnect(). Prototype was for pch_udc_init() instead Fixes: 1c575d2d2e3f ("usb: gadget: pch_udc: Fix usb/gadget/pch_udc: Fix ether gadget connect/disconnect issue") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210323153626.54908-4-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23usb: gadget: pch_udc: Check for DMA mapping errorAndy Shevchenko1-1/+1
DMA mapping might fail, we have to check it with dma_mapping_error(). Otherwise DMA-API is not happy: DMA-API: pch_udc 0000:02:02.4: device driver failed to check map error[device address=0x00000000027ee678] [size=64 bytes] [mapped as single] Fixes: abab0c67c061 ("usb: pch_udc: Fixed issue which does not work with g_serial") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210323153626.54908-3-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23usb: gadget: pch_udc: Check if driver is present before calling ->setup()Andy Shevchenko1-10/+18
Since we have a separate routine for VBUS sense, the interrupt may occur before gadget driver is present. Hence, ->setup() call may oops the kernel: [ 55.245843] BUG: kernel NULL pointer dereference, address: 00000010 ... [ 55.245843] EIP: pch_udc_isr.cold+0x162/0x33f ... [ 55.245843] <IRQ> [ 55.245843] ? pch_udc_svc_data_out+0x160/0x160 Check if driver is present before calling ->setup(). Fixes: f646cf94520e ("USB device driver of Topcliff PCH") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210323153626.54908-2-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23usb: gadget: pch_udc: Replace cpu_to_le32() by lower_32_bits()Andy Shevchenko1-1/+1
Either way ~0 will be in the correct byte order, hence replace cpu_to_le32() by lower_32_bits(). Moreover, it makes sparse happy, otherwise it complains: .../pch_udc.c:1813:27: warning: incorrect type in assignment (different base types) .../pch_udc.c:1813:27: expected unsigned int [usertype] dataptr .../pch_udc.c:1813:27: got restricted __le32 [usertype] Fixes: f646cf94520e ("USB device driver of Topcliff PCH") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210323153626.54908-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23usb: xhci: Remove unused functionThinh Nguyen1-147/+0
Now that we replaced the xhci_create_usb3_bos_desc() function. We can remove it along with the static usb_bos_descriptor structure. Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/ce0acbbd0bd3c3c3a08e6418ab3bdb431a44bbfd.1615432770.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23usb: xhci: Rewrite xhci_create_usb3_bos_desc()Thinh Nguyen1-2/+235
The current xhci_create_usb3_bos_desc() uses a static bos u8 array and various magic numbers and offsets making it difficult to extend support for USB 3.2. Let's rewrite this entire function to support dual-lane in USB 3.2. The hub driver matches the port speed ID from the extended port status to the SSID of the sublink speed attributes to detect if the device supports SuperSpeed Plus. Currently we don't provide the default gen1x2 and gen2x2 sublink speed capability descriptor for USB 3.2 roothub. The USB stack depends on this to detect and match the correct speed. In addition, if the xHCI host provides Protocol Speed ID (PSI) capability, then make sure to convert Protocol Speed ID Mantissa and Exponent (PSIM & PSIE) to lane speed for gen1x2 and gen2x2. Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/19cd09b03f96346996270579fd27d38b8a6844aa.1615432770.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23usb: xhci: Fix port minor revisionThinh Nguyen1-0/+9
Some hosts incorrectly use sub-minor version for minor version (i.e. 0x02 instead of 0x20 for bcdUSB 0x320 and 0x01 for bcdUSB 0x310). Currently the xHCI driver works around this by just checking for minor revision > 0x01 for USB 3.1 everywhere. With the addition of USB 3.2, checking this gets a bit cumbersome. Since there is no USB release with bcdUSB 0x301 to 0x309, we can assume that sub-minor version 01 to 09 is incorrect. Let's try to fix this and use the minor revision that matches with the USB/xHCI spec to help with the version checking within the driver. Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/ed330e95a19dc367819c5b4d78bf7a541c35aa0a.1615432770.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23usb: xhci: Init root hub SSP rateThinh Nguyen1-0/+2
Initialize USB 3.x root hub SuperSpeed Plus rate. Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/f1698a96d5f9dfaefb857b95e5db6135ae0c9e93.1615432770.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23media: staging: media: ipu3: code style fix - missing a blank line after ↵Nikolay Kyx1-0/+1
declarations This patch fixes the following checkpatch.pl warning: WARNING: Missing a blank line after declarations in file ipu3-css-fw.h Link: https://lore.kernel.org/linux-media/20210221081236.9758-2-knv418@gmail.com Signed-off-by: Nikolay Kyx <knv418@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-23media: staging: media/atomisp: don't compile unused codekarthik alapati1-2/+3
currently the functions defined in ibuf_ctrl_rmgr.c file are only used by isys_init.c when CONFIG_VIDEO_ATOMISP_ISP2401 is selected so dont't compile it when not needed, also fixes some sparse warnings Link: https://lore.kernel.org/linux-media/YDEZu3oniT/vUMMY@karthik-strix-linux.karthek.com Signed-off-by: karthik alapati <mail@karthek.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-23media: atomisp: do not free kmalloc memory by vfreeJiri Slaby1-1/+1
fw_minibuffer[i].buffer is allocated by kmalloc in sh_css_load_blob_info and by vmalloc in setup_binary. So use kvfree to decide which of those allocators to use for freeing. Also remove the useless cast. Link: https://lore.kernel.org/linux-media/20210219101216.28406-1-jslaby@suse.cz Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-23x86/build: Turn off -fcf-protection for realmode targetsArnd Bergmann1-1/+1
The new Ubuntu GCC packages turn on -fcf-protection globally, which causes a build failure in the x86 realmode code: cc1: error: ‘-fcf-protection’ is not compatible with this target Turn it off explicitly on compilers that understand this option. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20210323124846.1584944-1-arnd@kernel.org
2021-03-23power: reset: replace curly brackets in MakefileDaniel Golle1-1/+1
Normal parentheses should be used when referring to config variables in Makefile. Replace the accidentally introduced curly brackets by regular parentheses. Fixes: a7f79f99541ef ("power: reset: add driver for LinkStation power off") Acked-by: Daniel González Cabanelas <dgcbueu@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-03-23PCI: Release OF node in pci_scan_device()'s error pathDmitry Baryshkov1-0/+1
In pci_scan_device(), if pci_setup_device() fails for any reason, the code will not release device's of_node by calling pci_release_of_node(). Fix that by calling the release function. Fixes: 98d9f30c820d ("pci/of: Match PCI devices to OF nodes dynamically") Link: https://lore.kernel.org/r/20210124232826.1879-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
2021-03-23x86/kprobes: Use int3 instead of debug trap for single-stepMasami Hiramatsu3-188/+353
Use int3 instead of debug trap exception for single-stepping the probed instructions. Some instructions which change the ip registers or modify IF flags are emulated because those are not able to be single-stepped by int3 or may allow the interrupt while single-stepping. This actually changes the kprobes behavior. - kprobes can not probe following instructions; int3, iret, far jmp/call which get absolute address as immediate, indirect far jmp/call, indirect near jmp/call with addressing by memory (register-based indirect jmp/call are OK), and vmcall/vmlaunch/vmresume/vmxoff. - If the kprobe post_handler doesn't set before registering, it may not be called in some case even if you set it afterwards. (IOW, kprobe booster is enabled at registration, user can not change it) But both are rare issue, unsupported instructions will not be used in the kernel (or rarely used), and post_handlers are rarely used (I don't see it except for the test code). Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/161469874601.49483.11985325887166921076.stgit@devnote2
2021-03-23x86/kprobes: Identify far indirect JMP correctlyMasami Hiramatsu1-2/+1
Since Grp5 far indirect JMP is FF "mod 101 r/m", it should be (modrm & 0x38) == 0x28, and near indirect JMP is also 0x38 == 0x20. So we can mask modrm with 0x30 and check 0x20. This is actually what the original code does, it also doesn't care the last bit. So the result code is same. Thus, I think this is just a cosmetic cleanup. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/161469873475.49483.13257083019966335137.stgit@devnote2
2021-03-23x86/kprobes: Retrieve correct opcode for group instructionMasami Hiramatsu1-1/+5
Since the opcodes start from 0xff are group5 instruction group which is not 2 bytes opcode but the extended opcode determined by the MOD/RM byte. The commit abd82e533d88 ("x86/kprobes: Do not decode opcode in resume_execution()") used insn->opcode.bytes[1], but that is not correct. We have to refer the insn->modrm.bytes[1] instead. Fixes: abd82e533d88 ("x86/kprobes: Do not decode opcode in resume_execution()") Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/161469872400.49483.18214724458034233166.stgit@devnote2
2021-03-23Bluetooth: Remove trailing semicolon in macrosMeng Yu1-2/+2
remove trailing semicolon in macros and coding style fix. Signed-off-by: Meng Yu <yumeng18@huawei.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-03-23Bluetooth: check for zapped sk before connectingArchie Pusaka1-0/+8
There is a possibility of receiving a zapped sock on l2cap_sock_connect(). This could lead to interesting crashes, one such case is tearing down an already tore l2cap_sock as is happened with this call trace: __dump_stack lib/dump_stack.c:15 [inline] dump_stack+0xc4/0x118 lib/dump_stack.c:56 register_lock_class kernel/locking/lockdep.c:792 [inline] register_lock_class+0x239/0x6f6 kernel/locking/lockdep.c:742 __lock_acquire+0x209/0x1e27 kernel/locking/lockdep.c:3105 lock_acquire+0x29c/0x2fb kernel/locking/lockdep.c:3599 __raw_spin_lock_bh include/linux/spinlock_api_smp.h:137 [inline] _raw_spin_lock_bh+0x38/0x47 kernel/locking/spinlock.c:175 spin_lock_bh include/linux/spinlock.h:307 [inline] lock_sock_nested+0x44/0xfa net/core/sock.c:2518 l2cap_sock_teardown_cb+0x88/0x2fb net/bluetooth/l2cap_sock.c:1345 l2cap_chan_del+0xa3/0x383 net/bluetooth/l2cap_core.c:598 l2cap_chan_close+0x537/0x5dd net/bluetooth/l2cap_core.c:756 l2cap_chan_timeout+0x104/0x17e net/bluetooth/l2cap_core.c:429 process_one_work+0x7e3/0xcb0 kernel/workqueue.c:2064 worker_thread+0x5a5/0x773 kernel/workqueue.c:2196 kthread+0x291/0x2a6 kernel/kthread.c:211 ret_from_fork+0x4e/0x80 arch/x86/entry/entry_64.S:604 Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reported-by: syzbot+abfc0f5e668d4099af73@syzkaller.appspotmail.com Reviewed-by: Alain Michaud <alainm@chromium.org> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-03-23sched/fair: Reduce long-tail newly idle balance costAubrey Li1-0/+9
A long-tail load balance cost is observed on the newly idle path, this is caused by a race window between the first nr_running check of the busiest runqueue and its nr_running recheck in detach_tasks. Before the busiest runqueue is locked, the tasks on the busiest runqueue could be pulled by other CPUs and nr_running of the busiest runqueu becomes 1 or even 0 if the running task becomes idle, this causes detach_tasks breaks with LBF_ALL_PINNED flag set, and triggers load_balance redo at the same sched_domain level. In order to find the new busiest sched_group and CPU, load balance will recompute and update the various load statistics, which eventually leads to the long-tail load balance cost. This patch clears LBF_ALL_PINNED flag for this race condition, and hence reduces the long-tail cost of newly idle balance. Signed-off-by: Aubrey Li <aubrey.li@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org> Link: https://lkml.kernel.org/r/1614154549-116078-1-git-send-email-aubrey.li@intel.com
2021-03-23sched/fair: Optimize test_idle_cores() for !SMTBarry Song1-3/+5
update_idle_core() is only done for the case of sched_smt_present. but test_idle_cores() is done for all machines even those without SMT. This can contribute to up 8%+ hackbench performance loss on a machine like kunpeng 920 which has no SMT. This patch removes the redundant test_idle_cores() for !SMT machines. Hackbench is ran with -g {2..14}, for each g it is ran 10 times to get an average. $ numactl -N 0 hackbench -p -T -l 20000 -g $1 The below is the result of hackbench w/ and w/o this patch: g= 2 4 6 8 10 12 14 w/o: 1.8151 3.8499 5.5142 7.2491 9.0340 10.7345 12.0929 w/ : 1.8428 3.7436 5.4501 6.9522 8.2882 9.9535 11.3367 +4.1% +8.3% +7.3% +6.3% Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org> Acked-by: Mel Gorman <mgorman@suse.de> Link: https://lkml.kernel.org/r/20210320221432.924-1-song.bao.hua@hisilicon.com
2021-03-23psi: Reduce calls to sched_clock() in psiShakeel Butt1-9/+10
We noticed that the cost of psi increases with the increase in the levels of the cgroups. Particularly the cost of cpu_clock() sticks out as the kernel calls it multiple times as it traverses up the cgroup tree. This patch reduces the calls to cpu_clock(). Performed perf bench on Intel Broadwell with 3 levels of cgroup. Before the patch: $ perf bench sched all # Running sched/messaging benchmark... # 20 sender and receiver processes per group # 10 groups == 400 processes run Total time: 0.747 [sec] # Running sched/pipe benchmark... # Executed 1000000 pipe operations between two processes Total time: 3.516 [sec] 3.516689 usecs/op 284358 ops/sec After the patch: $ perf bench sched all # Running sched/messaging benchmark... # 20 sender and receiver processes per group # 10 groups == 400 processes run Total time: 0.640 [sec] # Running sched/pipe benchmark... # Executed 1000000 pipe operations between two processes Total time: 3.329 [sec] 3.329820 usecs/op 300316 ops/sec Signed-off-by: Shakeel Butt <shakeelb@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Link: https://lkml.kernel.org/r/20210321205156.4186483-1-shakeelb@google.com
2021-03-23stop_machine: Add caller debug info to queue_stop_cpus_workValentin Schneider1-0/+1
Most callsites were covered by commit a8b62fd08505 ("stop_machine: Add function and caller debug info") but this skipped queue_stop_cpus_work(). Add caller debug info to it. Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20201210163830.21514-2-valentin.schneider@arm.com
2021-03-23USB: gadget: f_fs: fix memdup_user.cocci warningskernel test robot1-8/+3
drivers/usb/gadget/function/f_fs.c:3829:8-15: WARNING opportunity for memdup_user Use memdup_user rather than duplicating its implementation This is a little bit restricted to reduce false positives Generated by: scripts/coccinelle/api/memdup_user.cocci Fixes: 8704fd73bf56 ("USB: gadget: f_fs: remove likely/unlikely") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20210308070951.GA83949@8a16bdd473dc Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23watchdog: retu_wdt: Clean-up by using managed work initMatti Vaittinen1-16/+6
Few drivers implement remove call-back only for ensuring a delayed work gets cancelled prior driver removal. Clean-up these by switching to use devm_delayed_work_autocancel() instead. This change is compile-tested only. All testing is appreciated. Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/be299515fbee2c311162ca99ea0dbee933044b56.1616506559.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23regulator: qcom_spmi-regulator: Clean-up by using managed work initMatti Vaittinen1-26/+8
Few drivers implement remove call-back only for ensuring a delayed work gets cancelled prior driver removal. Clean-up these by switching to use devm_delayed_work_autocancel() instead. Additionally, this helps avoiding mixing devm and manual resource management and cleans up a (theoretical?) bug where devm managed over-current IRQ might schedule a new work item after wq was cleaned at remove(). This change is compile-tested only. All testing is appreciated. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/3bd35bb43257f4bf5b99f75d207ed5e1e08d1d38.1616506559.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23power: supply: Clean-up few drivers by using managed work initMatti Vaittinen4-46/+23
Few drivers implement remove call-back only for ensuring a delayed work gets cancelled prior driver removal. Clean-up these by switching to use devm_delayed_work_autocancel() instead. This change is compile-tested only. All testing is appreciated. Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/e5b1b0380cdd1aa066c9ac6d7a8b1a86ba1ddbbe.1616506559.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23platform/x86: gpd pocket fan: Clean-up by using managed work initMatti Vaittinen1-11/+6
Few drivers implement remove call-back only for ensuring a delayed work gets cancelled prior driver removal. Clean-up these by switching to use devm_delayed_work_autocancel() instead. This change is compile-tested only. All testing is appreciated. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/aa25a6781ba016772b045cd6e630da8c559a665d.1616506559.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23hwmon: raspberry-pi: Clean-up few drivers by using managed work initMatti Vaittinen1-11/+6
Few drivers implement remove call-back only for ensuring a delayed work gets cancelled prior driver removal. Clean-up these by switching to use devm_delayed_work_autocancel() instead. This change is compile-tested only. All testing is appreciated. Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/4830f52d46278ea1c92ad7252f6050540346d8b7.1616506559.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23extconn: Clean-up few drivers by using managed work initMatti Vaittinen4-45/+20
Few drivers implement remove call-back only for ensuring a delayed work gets cancelled prior driver removal. Clean-up these by switching to use devm_delayed_work_autocancel() instead. Additionally, this helps avoiding mixing devm and manual resource management and cleans up a (theoretical?) bug from extconn-palmas.c and extcon-qcom-spmi-misc.c where (devm managed)IRQ might schedule new work item after wq was cleaned at remove(). This change is compile-tested only. All testing is appreciated. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/b1030eddbf0069f2d39e951be1d8e40d6413aeeb.1616506559.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23MAINTAINERS: Add entry for devm helpersMatti Vaittinen1-0/+6
Devm helper header containing small inline helpers was added. Hans promised to maintain it. Add Hans as maintainer and myself as designated reviewer. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/eec1797734e3d080662aa732c565ed4a3c261799.1616506559.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23workqueue: Add resource managed version of delayed work initMatti Vaittinen1-0/+53
A few drivers which need a delayed work-queue must cancel work at driver detach. Some of those implement remove() solely for this purpose. Help drivers to avoid unnecessary remove and error-branch implementation by adding managed verision of delayed work initialization. This will also help drivers to avoid mixing manual and devm based unwinding when other resources are handled by devm. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/51769ea4668198deb798fe47fcfb5f5288d61586.1616506559.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23staging: rtl8723bs: remove blank line os_dep/os_intfs.cFabio Aiuto1-1/+0
remove blank line Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com> Link: https://lore.kernel.org/r/ae5671883e9a869aced3eece40b587c51e15d520.1616503354.git.fabioaiuto83@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23staging: rtl8723bs: remove unnecessary extern in os_dep/sdio_intf.cFabio Aiuto1-2/+0
remove unnecessary extern. The function is defined static in os_dep/os_intfs.c and used only once in the same file Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com> Link: https://lore.kernel.org/r/f3a7b2c00221aa09ed782fb30ce55936f443a12d.1616503354.git.fabioaiuto83@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23staging: rtl8723bs: remove undefined function prototype in of os_dep/sdio_intf.cFabio Aiuto1-1/+0
fix the following checkpatch issue: WARNING: externs should be avoided in .c files 486: FILE: drivers/staging/rtl8723bs/os_dep/sdio_intf.c:486: +extern int pm_netdev_close(struct net_device *pnetdev, u8 bnormal); Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com> Link: https://lore.kernel.org/r/06d61465fd33b6cf6d9428ac983e55f50afd448b.1616503354.git.fabioaiuto83@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23staging: rtl8723bs: move function prototypes out of os_dep/int_fs.cFabio Aiuto3-5/+3
fix the following checkpatch issues: WARNING: externs should be avoided in .c files 196: FILE: drivers/staging/rtl8723bs/os_dep/os_intfs.c:196: +int _netdev_open(struct net_device *pnetdev); -- WARNING: externs should be avoided in .c files 197: FILE: drivers/staging/rtl8723bs/os_dep/os_intfs.c:197: +int netdev_open(struct net_device *pnetdev); moved function prototype in include/osdep_intf.h removed function prototype and made a static removed unnecessary extern declaration in os_dep/ioctl_cfg80211.c Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com> Link: https://lore.kernel.org/r/4604b856b9c20f1141e19894f46934cb860eebd4.1616503354.git.fabioaiuto83@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>