summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-03-24bus: ti-sysc: remove unneeded semicolonYang Li1-2/+2
Eliminate the following coccicheck warning: ./drivers/bus/ti-sysc.c:1595:2-3: Unneeded semicolon ./drivers/bus/ti-sysc.c:2833:3-4: Unneeded semicolon Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-24ARM: OMAP2+: Replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTEJiapeng Chong1-2/+2
Fix the following coccicheck warning: ./arch/arm/mach-omap2/pm-debug.c:171:0-23: WARNING: pwrdm_suspend_fops should be defined with DEFINE_DEBUGFS_ATTRIBUTE. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-24hv: hyperv.h: a few mundane typo fixesBhaskar Chowdhury1-4/+4
s/sructure/structure/ s/extention/extension/ s/offerred/offered/ s/adversley/adversely/ Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20210321233108.3885240-1-unixbhaskar@gmail.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2021-03-24ima: Fix the error code for restoring the PCR valueLi Huafei1-2/+2
In ima_restore_measurement_list(), hdr[HDR_PCR].data is pointing to a buffer of type u8, which contains the dumped 32-bit pcr value. Currently, only the least significant byte is used to restore the pcr value. We should convert hdr[HDR_PCR].data to a pointer of type u32 before fetching the value to restore the correct pcr value. Fixes: 47fdee60b47f ("ima: use ima_parse_buf() to parse measurements headers") Signed-off-by: Li Huafei <lihuafei1@huawei.com> Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-03-24drm/i915: make lockdep slightly happier about execbuf.Maarten Lankhorst4-19/+36
As soon as we install fences, we should stop allocating memory in order to prevent any potential deadlocks. This is required later on, when we start adding support for dma-fence annotations. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-11-maarten.lankhorst@linux.intel.com
2021-03-24drm/i915: Convert i915_gem_object_attach_phys() to ww locking, v2.Maarten Lankhorst3-10/+22
Simple adding of i915_gem_object_lock, we may start to pass ww to get_pages() in the future, but that won't be the case here; We override shmem's get_pages() handling by calling i915_gem_object_get_pages_phys(), no ww is needed. Changes since v1: - Call shmem put pages directly, the callback would go down the phys free path. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-10-maarten.lankhorst@linux.intel.com
2021-03-24drm/i915: Rework struct phys attachment handlingMaarten Lankhorst4-60/+78
Instead of creating a separate object type, we make changes to the shmem type, to clear struct page backing. This will allow us to ensure we never run into a race when we exchange obj->ops with other function pointers. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-9-maarten.lankhorst@linux.intel.com
2021-03-24drm/i915: Move HAS_STRUCT_PAGE to obj->flagsMaarten Lankhorst21-52/+63
We want to remove the changing of ops structure for attaching phys pages, so we need to kill off HAS_STRUCT_PAGE from ops->flags, and put it in the bo. This will remove a potential race of dereferencing the wrong obj->ops without ww mutex held. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> [danvet: apply with wiggle] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-8-maarten.lankhorst@linux.intel.com
2021-03-24drm/i915: Add gem object locking to madvise.Maarten Lankhorst1-1/+7
Doesn't need the full ww lock, only checking if pages are bound. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #irc Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-7-maarten.lankhorst@linux.intel.com
2021-03-24drm/i915: Ensure we hold the object mutex in pin correctly.Maarten Lankhorst3-2/+14
Currently we have a lot of places where we hold the gem object lock, but haven't yet been converted to the ww dance. Complain loudly about those places. i915_vma_pin shouldn't have the obj lock held, so we can do a ww dance, while i915_vma_pin_ww should. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #irc Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-6-maarten.lankhorst@linux.intel.com
2021-03-24drm/i915: Add missing -EDEADLK handling to execbuf pinning, v2.Maarten Lankhorst1-11/+24
i915_vma_pin may fail with -EDEADLK when we start locking page tables, so ensure we handle this correctly. Changes since v1: - Drop -EDEADLK todo, this commit handles it. - Change eb_pin_vma from sort-of-bool + -EDEADLK to a proper int. (Matt) Cc: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-5-maarten.lankhorst@linux.intel.com
2021-03-24drm/i915: Move cmd parser pinning to execbufferMaarten Lankhorst8-80/+142
We need to get rid of allocations in the cmd parser, because it needs to be called from a signaling context, first move all pinning to execbuf, where we already hold all locks. Allocate jump_whitelist in the execbuffer, and add annotations around intel_engine_cmd_parser(), to ensure we only call the command parser without allocating any memory, or taking any locks we're not supposed to. Because i915_gem_object_get_page() may also allocate memory, add a path to i915_gem_object_get_sg() that prevents memory allocations, and walk the sg list manually. It should be similarly fast. This has the added benefit of being able to catch all memory allocation errors before the point of no return, and return -ENOMEM safely to the execbuf submitter. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-4-maarten.lankhorst@linux.intel.com
2021-03-24drm/i915: Pin timeline map after first timeline pin, v4.Maarten Lankhorst5-44/+83
We're starting to require the reservation lock for pinning, so wait until we have that. Update the selftests to handle this correctly, and ensure pin is called in live_hwsp_rollover_user() and mock_hwsp_freelist(). Changes since v1: - Fix NULL + XX arithmatic, use casts. (kbuild) Changes since v2: - Clear entire cacheline when pinning. Changes since v3: - CACHELINE_BYTES -> TIMELINE_SEQNO_BYTES. (jekstrand) Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-3-maarten.lankhorst@linux.intel.com
2021-03-24drm/i915: Do not share hwsp across contexts any more, v8.Maarten Lankhorst11-417/+178
Instead of sharing pages with breadcrumbs, give each timeline a single page. This allows unrelated timelines not to share locks any more during command submission. As an additional benefit, seqno wraparound no longer requires i915_vma_pin, which means we no longer need to worry about a potential -EDEADLK at a point where we are ready to submit. Changes since v1: - Fix erroneous i915_vma_acquire that should be a i915_vma_release (ickle). - Extra check for completion in intel_read_hwsp(). Changes since v2: - Fix inconsistent indent in hwsp_alloc() (kbuild) - memset entire cacheline to 0. Changes since v3: - Do same in intel_timeline_reset_seqno(), and clflush for good measure. Changes since v4: - Use refcounting on timeline, instead of relying on i915_active. - Fix waiting on kernel requests. Changes since v5: - Bump amount of slots to maximum (256), for best wraparounds. - Add hwsp_offset to i915_request to fix potential wraparound hang. - Ensure timeline wrap test works with the changes. - Assign hwsp in intel_timeline_read_hwsp() within the rcu lock to fix a hang. Changes since v6: - Rename i915_request_active_offset to i915_request_active_seqno(), and elaborate the function. (tvrtko) Changes since v7: - Move hunk to where it belongs. (jekstrand) - Replace CACHELINE_BYTES with TIMELINE_SEQNO_BYTES. (jekstrand) Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com> #v1 Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-2-maarten.lankhorst@linux.intel.com
2021-03-24ARM: OMAP2+: Fix warning for omap_init_time_of()Tony Lindgren1-1/+1
Fix warning: no previous prototype for 'omap_init_time_of'. Fixes: e69b4e1a7577 ("ARM: OMAP2+: Add omap_init_time_of()") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-24ARM: OMAP2+: Make symbol 'pdata_quirks_init_clocks' staticWei Yongjun1-1/+1
The sparse tool complains as follows: arch/arm/mach-omap2/pdata-quirks.c:578:1: warning: symbol 'pdata_quirks_init_clocks' was not declared. Should it be static? This symbol is not used outside of pdata-quirks.c, so this commit marks it static. Fixes: a15de032a72d ("ARM: OMAP2+: Init both prm and prcm nodes early for clocks") Reported-by: Hulk Robot <hulkci@huawei.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-24drm/tilcdc: fix pixel clock setting warning messageDario Binacchi1-5/+5
The warning message did not printed the LCD pixel clock rate but the LCD clock divisor input rate. As a consequence, the required and real pixel clock rates are now passed to the tilcdc_pclk_diff(). Signed-off-by: Dario Binacchi <dariobin@libero.it> Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Jyri Sarha <jyri.sarha@iki.fi> Link: https://patchwork.freedesktop.org/patch/msgid/20210322213337.26667-4-dariobin@libero.it
2021-03-24drm/tilcdc: fix LCD pixel clock settingDario Binacchi1-2/+3
The tilcdc_pclk_diff() compares the requested pixel clock rate to the real one, so passing it clk_rate instead of clk_rate / clkdiv caused it to fail even if the clk_rate was properly set. Adding the real_pclk_rate variable makes the code more readable. Signed-off-by: Dario Binacchi <dariobin@libero.it> Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Jyri Sarha <jyri.sarha@iki.fi> Link: https://patchwork.freedesktop.org/patch/msgid/20210322213337.26667-3-dariobin@libero.it
2021-03-24drm/tilcdc: rename req_rate to pclk_rateDario Binacchi1-6/+6
The req_rate name is a little misleading, so let's rename to pclk_rate (pixel clock rate). Signed-off-by: Dario Binacchi <dariobin@libero.it> Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Jyri Sarha <jyri.sarha@iki.fi> Link: https://patchwork.freedesktop.org/patch/msgid/20210322213337.26667-2-dariobin@libero.it
2021-03-24drm/tilcdc: panel: fix platform_no_drv_owner.cocci warningsYang Li1-1/+0
./drivers/gpu/drm/tilcdc/tilcdc_panel.c:402:3-8: No need to set .owner here. The core will do it. Remove .owner field if calls are used which set it automatically Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Jyri Sarha <jyri.sarha@iki.fi> Link: https://patchwork.freedesktop.org/patch/msgid/1614762267-98454-1-git-send-email-yang.lee@linux.alibaba.com
2021-03-24i915_vma: Rename vma_lookup to i915_vma_lookupLiam Howlett1-2/+2
Use i915 prefix to avoid name collision with future vma_lookup() in mm. Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210323134208.3077275-1-Liam.Howlett@Oracle.com
2021-03-24selftests/sgx: Use getauxval() to simplify test codeTianjia Zhang1-20/+4
Use the library function getauxval() instead of a custom function to get the base address of the vDSO. [ bp: Massage commit message. ] Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lkml.kernel.org/r/20210314111621.68428-1-tianjia.zhang@linux.alibaba.com
2021-03-24MIPS: fix local_irq_{disable,enable} in asmmacro.hHuang Pei1-2/+1
commit ba9196d2e005 ("MIPS: Make DIEI support as a config option") use CPU_HAS_DIEI to indicate whether di/ei is implemented correctly, without this patch, "local_irq_disable" from entry.S in 3A1000 (with buggy di/ei) lose protection of commit e97c5b609880 ("MIPS: Make irqflags.h functions preempt-safe for non-mipsr2 cpus") Fixes: ba9196d2e005 ("MIPS: Make DIEI support as a config option") Signed-off-by: Huang Pei <huangpei@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-03-24clk: renesas: Couple of spelling fixesBhaskar Chowdhury1-2/+2
s/suposed/supposed/ s/concurent/concurrent/ Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20210321075813.9471-1-unixbhaskar@gmail.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-03-24pinctrl: renesas: r8a7791: Add bias pinconf supportGeert Uytterhoeven1-16/+371
Implement support for pull-up (most pins) and pull-down (ASEBRK#/ACK) handling for R-Car M2-W and M2-N, and RZ/G1M and RZ/G1N SoCs, using the common R-Car bias handling. Note that on RZ/G1 SoCs, the "ASEBRK#/ACK" pin is called "ACK", but the code doesn't handle that naming difference. Hence users should use the R-Car naming in DTS files. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20210303132619.3938128-7-geert+renesas@glider.be
2021-03-24pinctrl: renesas: Add support for R-Car SoCs with pull-down only pinsGeert Uytterhoeven2-19/+34
Currently, the common R-Car bias handling supports pin controllers with either: 1. Separate pin Pull-Enable (PUEN) and pin Pull-Up/Down control (PUD) registers, for controlling both pin pull-up and pin pull-down, 2. A single pin Pull-Up control register (PUPR), for controlling pin pull-up. Add support for a variant of #2, where some bits in the single pin Pull-Up control register (PUPR) control pin pull-down instead of pin pull-up. This is the case for the "ASEBRK#/ACK" pin on R-Car M2-W, M2-N, and E2, and the "ACK" pin on RZ/G1M, RZ/G1N, RZ/G1E, and RZ/G1C. To describe such a register, SoC-specific drivers need to provide two instances of pinmux_bias_reg: a first one with the puen field filled in, listing pins with pull-up functionality, and a second one with the pud field filled in, listing pins with pull-down functionality. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20210303132619.3938128-6-geert+renesas@glider.be
2021-03-24pinctrl: renesas: Add PORT_GP_CFG_7 macrosGeert Uytterhoeven1-2/+6
Add PORT_GP_CFG_7() and PORT_GP_7() helper macros, to be used by the r8a7791 subdriver. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20210303132619.3938128-5-geert+renesas@glider.be
2021-03-24pinctrl: renesas: Factor out common R-Mobile bias handlingGeert Uytterhoeven5-126/+59
The pin control sub-drivers for SH/R-Mobile SoCs contain almost identical bias handling. The only SoC-specific part is the mapping from pin numbers to PORTnCR registers. Reduce code duplication by factoring out the bias handling to the common pinctrl.c code. Use a callback to handle the pin/register mapping. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20210303132619.3938128-4-geert+renesas@glider.be
2021-03-24pinctrl: renesas: Move R-Car bias helpers to sh_pfc.hGeert Uytterhoeven13-15/+7
The Renesas Pin Function Controller driver uses two header files: - sh_pfc.h, for use by both core code and SoC-specific drivers, - core.h, for internal use by the core code only. Hence move the R-Car bias helper declarations from core.h to sh_pfc.h, and drop the inclusion of core.h from SoC-specific drivers that no longer need it. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20210303132619.3938128-3-geert+renesas@glider.be
2021-03-24pinctrl: renesas: Make sh_pfc_pin_to_bias_reg() staticGeert Uytterhoeven3-26/+22
Now all R-Car pin control drivers have been converted to the common R-Car bias handling, sh_pfc_pin_to_bias_reg() is only called from a single place. Move it from core.c to pinctrl.c, make it static, and rename it to rcar_pin_to_bias_reg(), as it is specific to R-Car SoCs. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20210303132619.3938128-2-geert+renesas@glider.be
2021-03-24MIPS: SiByte: Enable pata_platform with SWARM defconfigMaciej W. Rozycki1-0/+8
Enable support for the onboard PATA PIO mode3 interface, which is one of the boot devices supported by the CFE firmware with the Broadcom SWARM board. Include disk, CD-ROM and generic storage drivers. Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-03-24MIPS: SiByte: Regenerate stale SWARM defconfigMaciej W. Rozycki1-8/+1
Options have been removed and reordered since the last update, so regenerate the template so as not to interfere with actual changes. Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-03-24MIPS: disable CONFIG_IDE in malta*_defconfigChristoph Hellwig2-6/+0
Various malta defconfigs enable CONFIG_IDE for the tc86c001 ide driver, hich is a Toshiba plug in card that does not make much sense to use on bigsur platforms. For all other ATA cards libata support is already enabled. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-03-24arm64: dts: renesas: r8a77961: Add VIN and CSI-2 device nodesNiklas Söderlund1-10/+304
Add device nodes for VIN and CSI-2 to R-Car M3-W+ r8a77961 device tree. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Tested-by: LUU HOAI <hoai.luu.ub@renesas.com> Link: https://lore.kernel.org/r/20210312131020.1747344-1-niklas.soderlund+renesas@ragnatech.se Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-03-24MIPS: disable CONFIG_IDE in bigsur_defconfigChristoph Hellwig1-4/+0
bigsur_defconfig enables CONFIG_IDE for the tc86c001 ide driver, which is a Toshiba plug in card that does not make much sense to use on bigsur platforms. For all other ATA cards libata support is already enabled. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-03-24MIPS: disable CONFIG_IDE in rbtx49xx_defconfigChristoph Hellwig1-3/+0
rbtx49xx_defconfig enables CONFIG_IDE for the tx4938 and tx4939 ide drivers, but those aren't actually used by the last known remaining user: https://lore.kernel.org/lkml/20210107.101729.1936921832901251107.anemo@mba.ocn.ne.jp/ Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-03-24MIPS: switch workpad_defconfig from legacy IDE to libataChristoph Hellwig1-3/+6
Use libata instead of the deprecated legacy ide driver in workpad_defconfig. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-03-24MIPS: disable CONFIG_IDE in sb1250_swarm_defconfigChristoph Hellwig1-3/+0
sb1250_swarm_defconfig enables CONFIG_IDE but no actual host controller driver, so just drop CONFIG_IDE, CONFIG_BLK_DEV_IDECD and CONFIG_BLK_DEV_IDETAPE as they are useless. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-03-24ARM: dts: koelsch: Configure pull-up for SOFT_SW GPIO keysGeert Uytterhoeven1-0/+8
The GPIO pins connected to the 4 Software Switches ("SOFT_SW", SW2) do not have external pull-up resistors, but rely on internal pull-ups being enabled. Fortunately this is satisfied by the initial state of these pins. Make this explicit by enabling bias-pull-up, to remove the dependency on initial state and/or boot loader configuration. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20210303132941.3938516-1-geert+renesas@glider.be
2021-03-24KVM: s390: VSIE: fix MVPG handling for prefixing and MSOClaudio Imbrenda1-1/+4
Prefixing needs to be applied to the guest real address to translate it into a guest absolute address. The value of MSO needs to be added to a guest-absolute address in order to obtain the host-virtual. Fixes: bdf7509bbefa ("s390/kvm: VSIE: correctly handle MVPG when in VSIE") Reported-by: Janosch Frank <frankja@linux.ibm.com> Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210322140559.500716-3-imbrenda@linux.ibm.com [borntraeger@de.ibm.com simplify mso] Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2021-03-24KVM: s390: split kvm_s390_real_to_absClaudio Imbrenda1-6/+17
A new function _kvm_s390_real_to_abs will apply prefixing to a real address with a given prefix value. The old kvm_s390_real_to_abs becomes now a wrapper around the new function. This is needed to avoid code duplication in vSIE. Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210322140559.500716-2-imbrenda@linux.ibm.com Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2021-03-24KVM: s390: VSIE: correctly handle MVPG when in VSIEClaudio Imbrenda1-5/+93
Correctly handle the MVPG instruction when issued by a VSIE guest. Fixes: a3508fbe9dc6d ("KVM: s390: vsie: initial support for nested virtualization") Cc: stable@vger.kernel.org # f85f1baaa189: KVM: s390: split kvm_s390_logical_to_effective Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Acked-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Link: https://lore.kernel.org/r/20210302174443.514363-4-imbrenda@linux.ibm.com [borntraeger@de.ibm.com: apply fixup from Claudio] Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2021-03-24MIPS: PCI: Fix a typoBhaskar Chowdhury1-1/+1
s/packt/packet/ Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-03-24mips: asm: octeon: A typo fix in the file cvmx-address.hBhaskar Chowdhury1-1/+1
s/techically/technically/ Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-03-24ARM: dts: sun8i: h3: beelink-x2: Add power buttonJernej Skrabec1-0/+11
Beelink X2 has power button. Add node for it. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210323204341.28825-1-jernej.skrabec@siol.net
2021-03-24KVM: s390: extend kvm_s390_shadow_fault to return entry pointerClaudio Imbrenda3-10/+34
Extend kvm_s390_shadow_fault to return the pointer to the valid leaf DAT table entry, or to the invalid entry. Also return some flags in the lower bits of the address: PEI_DAT_PROT: indicates that DAT protection applies because of the protection bit in the segment (or, if EDAT, region) tables. PEI_NOT_PTE: indicates that the address of the DAT table entry returned does not refer to a PTE, but to a segment or region table. Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Cc: stable@vger.kernel.org Reviewed-by: Janosch Frank <frankja@de.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Link: https://lore.kernel.org/r/20210302174443.514363-3-imbrenda@linux.ibm.com [borntraeger@de.ibm.com: fold in a fix from Claudio] Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2021-03-24xfrm: Fix NULL pointer dereference on policy lookupSteffen Klassert1-1/+1
When xfrm interfaces are used in combination with namespaces and ESP offload, we get a dst_entry NULL pointer dereference. This is because we don't have a dst_entry attached in the ESP offloading case and we need to do a policy lookup before the namespace transition. Fix this by expicit checking of skb_dst(skb) before accessing it. Fixes: f203b76d78092 ("xfrm: Add virtual xfrm interfaces") Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2021-03-24xfrm: BEET mode doesn't support fragments for inner packetsXin Long1-0/+13
BEET mode replaces the IP(6) Headers with new IP(6) Headers when sending packets. However, when it's a fragment before the replacement, currently kernel keeps the fragment flag and replace the address field then encaps it with ESP. It would cause in RX side the fragments to get reassembled before decapping with ESP, which is incorrect. In Xiumei's testing, these fragments went over an xfrm interface and got encapped with ESP in the device driver, and the traffic was broken. I don't have a good way to fix it, but only to warn this out in dmesg. Reported-by: Xiumei Mu <xmu@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2021-03-24drm/rockchip: Remove unused variableMaxime Ripard1-2/+0
Commit 977697e20b3d ("drm/atomic: Pass the full state to planes atomic disable and update") added the old_state variable instead of what used to be a parameter, but it also removed the sole user of that variable in the vop_plane_atomic_update function leading to an usused variable. Remove it. Fixes: 977697e20b3d ("drm/atomic: Pass the full state to planes atomic disable and update") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210319152920.262035-1-maxime@cerno.tech
2021-03-24Bluetooth: Remove trailing semicolon in macrosMeng Yu1-2/+2
Macros should not use a trailing semicolon. Signed-off-by: Meng Yu <yumeng18@huawei.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>