summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-03-25net: ipa: reduce IPA version assumptionsAlex Elder5-30/+37
Modify conditional tests throughout the IPA code so they do not assume that IPA v3.5.1 is the oldest version supported. Also remove assumptions that IPA v4.5 is the newest version of IPA supported. Augment versions in comments with "+", to be clearer that the comment applies to a version and subsequent versions. (E.g., "present for IPA v4.2+" instead of just "present for v4.2".) Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25tcp_metrics: tcpm_hash_bucket is strictly localEric Dumazet1-1/+0
After commit 098a697b497e ("tcp_metrics: Use a single hash table for all network namespaces."), tcpm_hash_bucket is local to net/ipv4/tcp_metrics.c Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25inet: use bigger hash table for IP ID generationEric Dumazet1-14/+28
In commit 73f156a6e8c1 ("inetpeer: get rid of ip_id_count") I used a very small hash table that could be abused by patient attackers to reveal sensitive information. Switch to a dynamic sizing, depending on RAM size. Typical big hosts will now use 128x more storage (2 MB) to get a similar increase in security and reduction of hash collisions. As a bonus, use of alloc_large_system_hash() spreads allocated memory among all NUMA nodes. Fixes: 73f156a6e8c1 ("inetpeer: get rid of ip_id_count") Reported-by: Amit Klein <aksecurity@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25psample: Fix user API breakageIdo Schimmel1-4/+1
Cited commit added a new attribute before the existing group reference count attribute, thereby changing its value and breaking existing applications on new kernels. Before: # psample -l libpsample ERROR psample_group_foreach: failed to recv message: Operation not supported After: # psample -l Group Num Refcount Group Seq 1 1 0 Fix by restoring the value of the old attribute and remove the misleading comments from the enumerator to avoid future bugs. Cc: stable@vger.kernel.org Fixes: d8bed686ab96 ("net: psample: Add tunnel support") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reported-by: Adiel Bidani <adielb@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25math: Export mul_u64_u64_div_u64David S. Miller1-0/+1
Fixes: f51d7bf1dbe5 ("ptp_qoriq: fix overflow in ptp_qoriq_adjfine() u64 calcalation") Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25Merge branch 'mlxsw-resilient-nh-groups'David S. Miller9-23/+594
Ido Schimmel says: ==================== mlxsw: Add support for resilient nexthop groups This patchset adds support for resilient nexthop groups in mlxsw. As far as the hardware is concerned, resilient groups are the same as regular groups. The differences lie in how mlxsw manages the individual adjacency entries (nexthop buckets) that make up the group. The first difference is that unlike regular groups the driver needs to periodically update the kernel about activity of nexthop buckets so that the kernel will not treat the buckets as idle, given traffic is offloaded from the CPU to the ASIC. This is similar to what mlxsw is already doing with respect to neighbour entries. The update interval is set to 1 second to allow for short idle timers. The second difference is that nexthop buckets that correspond to an unresolved neighbour must be programmed to the device, as the size of the group must remain fixed. This is achieved by programming such entries with trap action, in order to trigger neighbour resolution by the kernel. The third difference is atomic replacement of individual nexthop buckets. While the driver periodically updates the kernel about activity of nexthop buckets, it is possible for a bucket to become active just before the kernel decides to replace it with a different nexthop. To avoid such situations and connections being reset, the driver instructs the device to only replace an adjacency entry if it is inactive. Failures are propagated back to the nexthop code. Patchset overview: Patches #1-#7 gradually add support for resilient nexthop groups Patch #8 finally enables such groups to be programmed to the device Patches #9-#10 add mlxsw-specific selftests ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25selftests: mlxsw: Add resilient nexthop groups configuration testsIdo Schimmel2-0/+87
Test that unsupported resilient nexthop group configurations are rejected and that offload / trap indication is correctly set on nexthop buckets in a resilient group. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25selftests: mlxsw: Test unresolved neigh trap with resilient nexthop groupsIdo Schimmel1-0/+31
The number of nexthop buckets in a resilient nexthop group never changes, so when the gateway address of a nexthop cannot be resolved, the nexthop buckets are programmed to trap packets to the CPU in order to trigger resolution. For example: # ip nexthop add id 1 via 198.51.100.1 dev swp3 # ip nexthop add id 10 group 1 type resilient buckets 32 # ip nexthop bucket get id 10 index 0 id 10 index 0 idle_time 1.44 nhid 1 trap Where 198.51.100.1 is a made-up IP. Test that in this case packets are indeed trapped to the CPU via the unresolved neigh trap. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25mlxsw: spectrum_router: Enable resilient nexthop groups to be programmedIdo Schimmel1-1/+85
Now that mlxsw supports resilient nexthop groups, allow them to be programmed after validating that their configuration conforms to the device's limitations (e.g., number of buckets is within predefined range). Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25mlxsw: spectrum_router: Periodically update activity of nexthop bucketsIdo Schimmel2-0/+102
The kernel periodically checks the idle time of nexthop buckets to determine if they are idle and can be re-populated with a new nexthop. When the resilient nexthop group is offloaded to hardware, the kernel will not see activity on nexthop buckets unless it is reported from hardware. Therefore, periodically (every 1 second) query the hardware for activity of adjacency entries used as part of a resilient nexthop group and report it to the nexthop code. The activity is only queried if resilient nexthop groups are in use. The delayed work is canceled otherwise. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25mlxsw: reg: Add Router Adjacency Table Activity Dump RegisterIdo Schimmel1-0/+55
The RATRAD register is used to dump and optionally clear activity bits of router adjacency table entries. Will be used by the next patch to query and clear the activity of nexthop buckets in a resilient nexthop group. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25mlxsw: spectrum_router: Update hardware flags on nexthop bucketsIdo Schimmel1-0/+37
So far, mlxsw only updated hardware flags ('offload' / 'trap') on nexthop objects. For resilient nexthop groups, these flags need to be updated on individual nexthop buckets as well. Update these flags whenever updating the flags of the encapsulating nexthop object and whenever a nexthop bucket is replaced. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25mlxsw: spectrum_router: Add nexthop bucket replacement supportIdo Schimmel1-0/+134
Replace a single nexthop bucket upon receiving a 'NEXTHOP_EVENT_BUCKET_REPLACE' notification. When the 'force' parameter is not set, instruct the device to only overwrite an adjacency entry if its activity is cleared, so as not to break existing flows using the adjacency entry. The device does not provide feedback if the replacement was successful in this case, so the contents of the adjacency entry after the replacement are compared with the replacement request. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25mlxsw: spectrum_router: Pass payload pointer to nexthop update functionIdo Schimmel5-17/+21
Have the caller pass a pointer to the payload of the RATR register to the function updating a single nexthop / adjacency entry. In a subsequent patch, this will allow the caller to make sure replacement was successful by querying the state of the adjacency entry after replacement and comparing with the initial request. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25mlxsw: spectrum_router: Add ability to overwrite adjacency entry only when ↵Ido Schimmel5-19/+32
inactive Allow the driver to instruct the device to only overwrite an adjacency entry if its activity is cleared. Currently, adjacency entry is always overwritten, regardless of activity. This will be used by subsequent patches to prevent replacement of active nexthop buckets. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25mlxsw: spectrum_router: Add support for resilient nexthop groupsIdo Schimmel1-1/+25
Parse the configuration of resilient nexthop groups to existing mlxsw data structures. Unlike non-resilient groups, nexthops without a valid MAC or router interface (RIF) are programmed with a trap action instead of not being programmed at all. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25Revert "xen: fix p2m size in dom0 for disabled memory hotplug case"Roger Pau Monne3-17/+14
This partially reverts commit 882213990d32 ("xen: fix p2m size in dom0 for disabled memory hotplug case") There's no need to special case XEN_UNPOPULATED_ALLOC anymore in order to correctly size the p2m. The generic memory hotplug option has already been tied together with the Xen hotplug limit, so enabling memory hotplug should already trigger a properly sized p2m on Xen PV. Note that XEN_UNPOPULATED_ALLOC depends on ZONE_DEVICE which pulls in MEMORY_HOTPLUG. Leave the check added to __set_phys_to_machine and the adjusted comment about EXTRA_MEM_RATIO. Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/20210324122424.58685-3-roger.pau@citrix.com [boris: fixed formatting issues] Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2021-03-25xen/x86: make XEN_BALLOON_MEMORY_HOTPLUG_LIMIT depend on MEMORY_HOTPLUGRoger Pau Monne2-4/+4
The Xen memory hotplug limit should depend on the memory hotplug generic option, rather than the Xen balloon configuration. It's possible to have a kernel with generic memory hotplug enabled, but without Xen balloon enabled, at which point memory hotplug won't work correctly due to the size limitation of the p2m. Rename the option to XEN_MEMORY_HOTPLUG_LIMIT since it's no longer tied to ballooning. Fixes: 9e2369c06c8a18 ("xen: add helpers to allocate unpopulated memory") Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/20210324122424.58685-2-roger.pau@citrix.com Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2021-03-25Add Open Routing Protocol ID to `rtnetlink.h`Cooper Lees1-0/+1
- The Open Routing (Open/R) network protocol netlink handler uses ID 99 - Will also add to `/etc/iproute2/rt_protos` once this is accepted - For more information: https://github.com/facebook/openr Signed-off-by: From: Cooper Lees <me@cooperlees.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25Merge series "MFD/extcon/ASoC: Rework arizona codec jack-detect support" ↵Mark Brown8-359/+306
from Hans de Goede <hdegoede@redhat.com>: Hi All, Here is v4 of my series to rework the arizona codec jack-detect support to use the snd_soc_jack helpers instead of direct extcon reporting. As discussed before here is a resend rebased on 5.12-rc2, making sure that all patches this depends on are in place. Lee, can you pick-up patches 1-6 through the MFD tree and then send a pull-req to Mark so that Mark can merge the Asoc parts throught the ASoC tree ? Patches 2-6 touch drivers/extcon, these all have an Ack from Chanwoo Choi for merging these through the MFD tree. Here is some more generic info on this series from the previous cover-letter: This is done by reworking the extcon driver into an arizona-jackdet library and then modifying the codec drivers to use that directly, replacing the old separate extcon child-devices and extcon-driver. This brings the arizona-codec jack-detect handling inline with how all other ASoC codec driver do this. This was developed and tested on a Lenovo Yoga Tablet 1051L with a WM5102 codec. This was also tested by Charles Keepax, one of the Cirrus Codec folks. Regards, Hans Hans de Goede (13): mfd: arizona: Drop arizona-extcon cells extcon: arizona: Fix some issues when HPDET IRQ fires after the jack has been unplugged extcon: arizona: Fix various races on driver unbind extcon: arizona: Fix flags parameter to the gpiod_get("wlf,micd-pol") call extcon: arizona: Always use pm_runtime_get_sync() when we need the device to be awake ASoC/extcon: arizona: Move arizona jack code to sound/soc/codecs/arizona-jack.c ASoC: arizona-jack: Move jack-detect variables to struct arizona_priv ASoC: arizona-jack: Use arizona->dev for runtime-pm ASoC: arizona-jack: convert into a helper library for codec drivers ASoC: arizona-jack: Use snd_soc_jack to report jack events ASoC: arizona-jack: Cleanup logging ASoC: arizona: Make the wm5102, wm5110, wm8997 and wm8998 drivers use the new jack library ASoC: Intel: bytcr_wm5102: Add jack detect support MAINTAINERS | 3 +- drivers/extcon/Kconfig | 8 - drivers/extcon/Makefile | 1 - drivers/mfd/arizona-core.c | 20 - sound/soc/codecs/Makefile | 2 +- .../soc/codecs/arizona-jack.c | 577 +++++++----------- sound/soc/codecs/arizona.h | 44 ++ sound/soc/codecs/wm5102.c | 12 +- sound/soc/codecs/wm5110.c | 12 +- sound/soc/codecs/wm8997.c | 14 +- sound/soc/codecs/wm8998.c | 9 + sound/soc/intel/boards/bytcr_wm5102.c | 28 +- 12 files changed, 325 insertions(+), 405 deletions(-) rename drivers/extcon/extcon-arizona.c => sound/soc/codecs/arizona-jack.c (76%) -- 2.30.1
2021-03-25md: Fix missing unused status line of /proc/mdstatJan Glauber1-1/+5
Reading /proc/mdstat with a read buffer size that would not fit the unused status line in the first read will skip this line from the output. So 'dd if=/proc/mdstat bs=64 2>/dev/null' will not print something like: unused devices: <none> Don't return NULL immediately in start() for v=2 but call show() once to print the status line also for multiple reads. Cc: stable@vger.kernel.org Fixes: 1f4aace60b0e ("fs/seq_file.c: simplify seq_file iteration code and interface") Signed-off-by: Jan Glauber <jglauber@digitalocean.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2021-03-25md/raid10: improve discard request for far layoutXiao Ni2-19/+61
For far layout, the discard region is not continuous on disks. So it needs far copies r10bio to cover all regions. It needs a way to know all r10bios have finish or not. Similar with raid10_sync_request, only the first r10bio master_bio records the discard bio. Other r10bios master_bio record the first r10bio. The first r10bio can finish after other r10bios finish and then return the discard bio. Tested-by: Adrian Huang <ahuang12@lenovo.com> Signed-off-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2021-03-25md/raid10: improve raid10 discard requestXiao Ni1-1/+262
Now the discard request is split by chunk size. So it takes a long time to finish mkfs on disks which support discard function. This patch improve handling raid10 discard request. It uses the similar way with patch 29efc390b (md/md0: optimize raid0 discard handling). But it's a little complex than raid0. Because raid10 has different layout. If raid10 is offset layout and the discard request is smaller than stripe size. There are some holes when we submit discard bio to underlayer disks. For example: five disks (disk1 - disk5) D01 D02 D03 D04 D05 D05 D01 D02 D03 D04 D06 D07 D08 D09 D10 D10 D06 D07 D08 D09 The discard bio just wants to discard from D03 to D10. For disk3, there is a hole between D03 and D08. For disk4, there is a hole between D04 and D09. D03 is a chunk, raid10_write_request can handle one chunk perfectly. So the part that is not aligned with stripe size is still handled by raid10_write_request. If reshape is running when discard bio comes and the discard bio spans the reshape position, raid10_write_request is responsible to handle this discard bio. I did a test with this patch set. Without patch: time mkfs.xfs /dev/md0 real4m39.775s user0m0.000s sys0m0.298s With patch: time mkfs.xfs /dev/md0 real0m0.105s user0m0.000s sys0m0.007s nvme3n1 259:1 0 477G 0 disk └─nvme3n1p1 259:10 0 50G 0 part nvme4n1 259:2 0 477G 0 disk └─nvme4n1p1 259:11 0 50G 0 part nvme5n1 259:6 0 477G 0 disk └─nvme5n1p1 259:12 0 50G 0 part nvme2n1 259:9 0 477G 0 disk └─nvme2n1p1 259:15 0 50G 0 part nvme0n1 259:13 0 477G 0 disk └─nvme0n1p1 259:14 0 50G 0 part Reviewed-by: Coly Li <colyli@suse.de> Reviewed-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Tested-by: Adrian Huang <ahuang12@lenovo.com> Signed-off-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2021-03-25md/raid10: pull the code that wait for blocked dev into one functionXiao Ni1-51/+69
The following patch will reuse these logics, so pull the same codes into one function. Tested-by: Adrian Huang <ahuang12@lenovo.com> Signed-off-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2021-03-25md/raid10: extend r10bio devs to raid disksXiao Ni1-5/+5
Now it allocs r10bio->devs[conf->copies]. Discard bio needs to submit to all member disks and it needs to use r10bio. So extend to r10bio->devs[geo.raid_disks]. Reviewed-by: Coly Li <colyli@suse.de> Tested-by: Adrian Huang <ahuang12@lenovo.com> Signed-off-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2021-03-25md: add md_submit_discard_bio() for submitting discard bioXiao Ni3-12/+24
Move these logic from raid0.c to md.c, so that we can also use it in raid10.c. Reviewed-by: Coly Li <colyli@suse.de> Reviewed-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Tested-by: Adrian Huang <ahuang12@lenovo.com> Signed-off-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2021-03-25net: enetc: don't depend on system endianness in enetc_set_mac_ht_fltVladimir Oltean1-6/+10
When enetc runs out of exact match entries for unicast address filtering, it switches to an approach based on hash tables, where multiple MAC addresses might end up in the same bucket. However, the enetc_set_mac_ht_flt function currently depends on the system endianness, because it interprets the 64-bit hash value as an array of two u32 elements. Modify this to use lower_32_bits and upper_32_bits. Tested by forcing enetc to go into hash table mode by creating two macvlan upper interfaces: ip link add link eno0 address 00:01:02:03:00:00 eno0.0 type macvlan && ip link set eno0.0 up ip link add link eno0 address 00:01:02:03:00:01 eno0.1 type macvlan && ip link set eno0.1 up and verified that the same bit values are written to the registers before and after: enetc_sync_mac_filters: addr 00:00:80:00:40:10 exact match 0 enetc_sync_mac_filters: addr 00:00:00:00:80:00 exact match 0 enetc_set_mac_ht_flt: hash 0x80008000000000 UMHFR0 0x0 UMHFR1 0x800080 Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25net: enetc: don't depend on system endianness in enetc_set_vlan_ht_filterVladimir Oltean1-4/+4
ENETC has a 64-entry hash table for VLAN RX filtering per Station Interface, which is accessed through two 32-bit registers: VHFR0 holding the low portion, and VHFR1 holding the high portion. The enetc_set_vlan_ht_filter function looks at the pf->vlan_ht_filter bitmap, which is fundamentally an unsigned long variable, and casts it to a u32 array of two elements. It puts the first u32 element into VHFR0 and the second u32 element into VHFR1. It is easy to imagine that this will not work on big endian systems (although, yes, we have bigger problems, because currently enetc assumes that the CPU endianness is equal to the controller endianness, aka little endian - but let's assume that we could add a cpu_to_le32 in enetc_wd_reg and a le32_to_cpu in enetc_rd_reg). Let's use lower_32_bits and upper_32_bits which are designed to work regardless of endianness. Tested that both the old and the new method produce the same results: $ ethtool -K eth1 rx-vlan-filter on $ ip link add link eth1 name eth1.100 type vlan id 100 enetc_set_vlan_ht_filter: method 1: si_idx 0 VHFR0 0x0 VHFR1 0x20 enetc_set_vlan_ht_filter: method 2: si_idx 0 VHFR0 0x0 VHFR1 0x20 $ ip link add link eth1 name eth1.101 type vlan id 101 enetc_set_vlan_ht_filter: method 1: si_idx 0 VHFR0 0x0 VHFR1 0x30 enetc_set_vlan_ht_filter: method 2: si_idx 0 VHFR0 0x0 VHFR1 0x30 $ ip link add link eth1 name eth1.34 type vlan id 34 enetc_set_vlan_ht_filter: method 1: si_idx 0 VHFR0 0x0 VHFR1 0x34 enetc_set_vlan_ht_filter: method 2: si_idx 0 VHFR0 0x0 VHFR1 0x34 $ ip link add link eth1 name eth1.1024 type vlan id 1024 enetc_set_vlan_ht_filter: method 1: si_idx 0 VHFR0 0x1 VHFR1 0x34 enetc_set_vlan_ht_filter: method 2: si_idx 0 VHFR0 0x1 VHFR1 0x34 Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25netdevsim: switch to memdup_user_nul()Wei Yongjun1-8/+3
Use memdup_user_nul() helper instead of open-coding to simplify the code. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25net: decnet: Fixed multiple Coding Style issuesSai Kalyaan Palla1-13/+13
Made changes to coding style as suggested by checkpatch.pl changes are of the type: space required before the open parenthesis '(' space required after that ',' Signed-off-by: Sai Kalyaan Palla <saikalyaan63@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25Merge branch 'phy-c45-loopback'David S. Miller3-0/+11
Wong Vee Khee says: ==================== Add support for Clause-45 PHY Loopback This patch series add support for Clause-45 PHY loopback. It involves adding a generic API in the PHY framework, which can be accessed by all C45 PHY drivers using the .set_loopback callback. Also, enable PHY loopback for the Marvell 88x3310/88x2110 driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25net: phy: marvell10g: Add PHY loopback supportWong Vee Khee1-0/+2
Add support for PHY loopback for Marvell 88x2110 and Marvell 88x3310. This allow user to perform PHY loopback test using ethtool selftest. Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25net: phy: add genphy_c45_loopbackWong Vee Khee2-0/+9
Add generic code to enable C45 PHY loopback into the common phy-c45.c file. This will allow C45 PHY drivers aceess this by setting .set_loopback. Suggested-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25rhashtable: avoid -Wrestrict warning on overlapping sprintf outputArnd Bergmann1-4/+5
sprintf() is declared with a restrict keyword to not allow input and output to point to the same buffer: lib/test_rhashtable.c: In function 'print_ht': lib/test_rhashtable.c:504:4: error: 'sprintf' argument 3 overlaps destination object 'buff' [-Werror=restrict] 504 | sprintf(buff, "%s\nbucket[%d] -> ", buff, i); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ lib/test_rhashtable.c:489:7: note: destination object referenced by 'restrict'-qualified argument 1 was declared here 489 | char buff[512] = ""; | ^~~~ Rework this function to remember the last offset instead to avoid the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25octeontx2: fix -Wnonnull warningArnd Bergmann1-32/+28
When compile testing this driver on a platform on which probe() is known to fail at compile time, gcc warns about the cgx_lmactype_string[] array being uninitialized: In function 'strncpy', inlined from 'link_status_user_format' at /git/arm-soc/drivers/net/ethernet/marvell/octeontx2/af/cgx.c:838:2, inlined from 'cgx_link_change_handler' at /git/arm-soc/drivers/net/ethernet/marvell/octeontx2/af/cgx.c:853:2: include/linux/fortify-string.h:27:30: error: argument 2 null where non-null expected [-Werror=nonnull] 27 | #define __underlying_strncpy __builtin_strncpy Address this by turning the runtime initialization into a fixed array, which should also produce better code. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25net: stmmac: Add hardware supported cross-timestampTan Tee Min9-0/+193
Cross timestamping is supported on Integrated Ethernet Controller in Intel SoC such as EHL and TGL with Always Running Timer. The hardware cross-timestamp result is made available to applications through the PTP_SYS_OFFSET_PRECISE ioctl which calls stmmac_getcrosststamp(). Device time is stored in the MAC Auxiliary register. The 64-bit System time (ART timestamp) is stored in registers that are only addressable by using MDIO space. Signed-off-by: Tan Tee Min <tee.min.tan@intel.com> Co-developed-by: Wong Vee Khee <vee.khee.wong@linux.intel.com> Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25sfc-falcon: Fix a typoBhaskar Chowdhury1-1/+1
s/maintaning/maintaining/ Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25net: sched: Mundane typo fixesBhaskar Chowdhury1-2/+2
s/procdure/procedure/ s/maintanance/maintenance/ Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25octeontx2-af: Few mundane typos fixedBhaskar Chowdhury1-6/+6
s/preceeds/precedes/ .....two different places s/rsponse/response/ s/cetain/certain/ s/precison/precision/ Fix a sentence construction as per suggestion. Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-24security: commoncap: fix -Wstringop-overread warningArnd Bergmann1-1/+1
gcc-11 introdces a harmless warning for cap_inode_getsecurity: security/commoncap.c: In function ‘cap_inode_getsecurity’: security/commoncap.c:440:33: error: ‘memcpy’ reading 16 bytes from a region of size 0 [-Werror=stringop-overread] 440 | memcpy(&nscap->data, &cap->data, sizeof(__le32) * 2 * VFS_CAP_U32); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The problem here is that tmpbuf is initialized to NULL, so gcc assumes it is not accessible unless it gets set by vfs_getxattr_alloc(). This is a legitimate warning as far as I can tell, but the code is correct since it correctly handles the error when that function fails. Add a separate NULL check to tell gcc about it as well. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: James Morris <jamorris@linux.microsoft.com>
2021-03-24arm64: irq: allow FIQs to be handledMark Rutland3-9/+38
On contemporary platforms we don't use FIQ, and treat any stray FIQ as a fatal event. However, some platforms have an interrupt controller wired to FIQ, and need to handle FIQ as part of regular operation. So that we can support both cases dynamically, this patch updates the FIQ exception handling code to operate the same way as the IRQ handling code, with its own handle_arch_fiq handler. Where a root FIQ handler is not registered, an unexpected FIQ exception will trigger the default FIQ handler, which will panic() as today. Where a root FIQ handler is registered, handling of the FIQ is deferred to that handler. As el0_fiq_invalid_compat is supplanted by el0_fiq, the former is removed. For !CONFIG_COMPAT builds we never expect to take an exception from AArch32 EL0, so we keep the common el0_fiq_invalid handler. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Hector Martin <marcan@marcan.st> Cc: James Morse <james.morse@arm.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20210315115629.57191-7-mark.rutland@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-03-24arm64: Always keep DAIF.[IF] in syncHector Martin7-25/+26
Apple SoCs (A11 and newer) have some interrupt sources hardwired to the FIQ line. We implement support for this by simply treating IRQs and FIQs the same way in the interrupt vectors. To support these systems, the FIQ mask bit needs to be kept in sync with the IRQ mask bit, so both kinds of exceptions are masked together. No other platforms should be delivering FIQ exceptions right now, and we already unmask FIQ in normal process context, so this should not have an effect on other systems - if spurious FIQs were arriving, they would already panic the kernel. Signed-off-by: Hector Martin <marcan@marcan.st> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Hector Martin <marcan@marcan.st> Cc: James Morse <james.morse@arm.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20210315115629.57191-6-mark.rutland@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-03-24arm64: entry: factor irq triage logic into macrosMarc Zyngier1-37/+43
In subsequent patches we'll allow an FIQ handler to be registered, and FIQ exceptions will need to be triaged very similarly to IRQ exceptions. So that we can reuse the existing logic, this patch factors the IRQ triage logic out into macros that can be reused for FIQ. The macros are named to follow the elX_foo_handler scheme used by the C exception handlers. For consistency with other top-level exception handlers, the kernel_entry/kernel_exit logic is not moved into the macros. As FIQ will use a different C handler, this handler name is provided as an argument to the macros. There should be no functional change as a result of this patch. Signed-off-by: Marc Zyngier <maz@kernel.org> [Mark: rework macros, commit message, rebase before DAIF rework] Signed-off-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Hector Martin <marcan@marcan.st> Cc: James Morse <james.morse@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20210315115629.57191-5-mark.rutland@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-03-24arm64: irq: rework root IRQ handler registrationMark Rutland1-4/+8
If we accidentally unmask IRQs before we've registered a root IRQ handler, handle_arch_irq will be NULL, and the IRQ exception handler will branch to a bogus address. To make this easier to debug, this patch initialises handle_arch_irq to a default handler which will panic(), making such problems easier to debug. When we add support for FIQ handlers, we can follow the same approach. When we add support for a root FIQ handler, it's possible to have root IRQ handler without an root FIQ handler, and in theory the inverse is also possible. To permit this, and to keep the IRQ/FIQ registration logic similar, this patch removes the panic in the absence of a root IRQ controller. Instead, set_handle_irq() logs when a handler is registered, which is sufficient for debug purposes. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Hector Martin <marcan@marcan.st> Cc: James Morse <james.morse@arm.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20210315115629.57191-4-mark.rutland@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-03-24arm64: don't use GENERIC_IRQ_MULTI_HANDLERMarc Zyngier3-1/+14
In subsequent patches we want to allow irqchip drivers to register as FIQ handlers, with a set_handle_fiq() function. To keep the IRQ/FIQ paths similar, we want arm64 to provide both set_handle_irq() and set_handle_fiq(), rather than using GENERIC_IRQ_MULTI_HANDLER for the former. This patch adds an arm64-specific implementation of set_handle_irq(). There should be no functional change as a result of this patch. Signed-off-by: Marc Zyngier <maz@kernel.org> [Mark: use a single handler pointer] Signed-off-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Hector Martin <marcan@marcan.st> Cc: James Morse <james.morse@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20210315115629.57191-3-mark.rutland@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-03-24genirq: Allow architectures to override set_handle_irq() fallbackMarc Zyngier1-0/+2
Some architectures want to provide the generic set_handle_irq() API, but for structural reasons need to provide their own implementation. For example, arm64 needs to do this to provide uniform set_handle_irq() and set_handle_fiq() registration functions. Make this possible by allowing architectures to provide their own implementation of set_handle_irq when CONFIG_GENERIC_IRQ_MULTI_HANDLER is not selected. Signed-off-by: Marc Zyngier <maz@kernel.org> [Mark: expand commit message] Signed-off-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Hector Martin <marcan@marcan.st> Cc: James Morse <james.morse@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20210315115629.57191-2-mark.rutland@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-03-24of: overlay: fix for_each_child.cocci warningskernel test robot1-0/+1
Function "for_each_child_of_node" should have of_node_put() before goto. Generated by: scripts/coccinelle/iterators/for_each_child.cocci Fixes: 82c2d81361ec ("coccinelle: iterators: Add for_each_child.cocci script") CC: Sumera Priyadarsini <sylphrenadin@gmail.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: kernel test robot <lkp@intel.com> Signed-off-by: Julia Lawall <julia.lawall@inria.fr> Reviewed-by: Frank Rowand <frank.rowand@sony.com> Tested-by: Frank Rowand <frank.rowand@sony.com> Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2103221918450.2918@hadrien Signed-off-by: Rob Herring <robh@kernel.org>
2021-03-24dt-bindings: msm: Couple of spelling fixesBhaskar Chowdhury1-2/+2
s/Subsytem/Subsystem/ s/contoller/controller/ Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Link: https://lore.kernel.org/r/20210320192553.29922-1-unixbhaskar@gmail.com Signed-off-by: Rob Herring <robh@kernel.org>
2021-03-24spi: pl022: Fix trailing whitespaceJay Fang1-1/+1
Fix checkpatch error: ERROR: trailing whitespace #1198: FILE: spi-pl022.c:1198: Signed-off-by: Jay Fang <f.fangjian@huawei.com> Link: https://lore.kernel.org/r/1616566602-13894-12-git-send-email-f.fangjian@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-24spi: rockchip: Fix code indent should use tabs where possibleJay Fang1-3/+3
Fix checkpatch errors: ERROR: code indent should use tabs where possible #484: FILE: spi-rockchip.c:484: +^I | CR0_BHT_8BIT << CR0_BHT_OFFSET$ ERROR: code indent should use tabs where possible #485: FILE: spi-rockchip.c:485: +^I | CR0_SSD_ONE << CR0_SSD_OFFSET$ ERROR: code indent should use tabs where possible #486: FILE: spi-rockchip.c:486: +^I | CR0_EM_BIG << CR0_EM_OFFSET;$ Signed-off-by: Jay Fang <f.fangjian@huawei.com> Link: https://lore.kernel.org/r/1616566602-13894-11-git-send-email-f.fangjian@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>