summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-03-29pinctrl: add a pincontrol driver for BCM63268Álvaro Fernández Rojas3-0/+652
Add a pincontrol driver for BCM63268. BCM63268 allows muxing GPIOs to different functions. Depending on the mux, these are either single pin configurations or whole pin groups. Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Link: https://lore.kernel.org/r/20210324081923.20379-20-noltari@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-03-29dt-bindings: add BCM63268 GPIO sysctl binding documentationÁlvaro Fernández Rojas1-0/+194
Add binding documentation for the GPIO sysctl found in BCM63268 SoCs. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210324081923.20379-19-noltari@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-03-29dt-bindings: add BCM63268 pincontroller binding documentationÁlvaro Fernández Rojas1-0/+164
Add binding documentation for the pincontrol core found in the BCM63268 family SoCs. Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210324081923.20379-18-noltari@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-03-29pinctrl: add a pincontrol driver for BCM6368Álvaro Fernández Rojas3-0/+532
Add a pincontrol driver for BCM6368. BCM6368 allows muxing the first 32 GPIOs onto alternative functions. Not all are documented. Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Link: https://lore.kernel.org/r/20210324081923.20379-17-noltari@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-03-29dt-bindings: add BCM6368 GPIO sysctl binding documentationÁlvaro Fernández Rojas1-0/+246
Add binding documentation for the GPIO sysctl found in BCM6368 SoCs. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210324081923.20379-16-noltari@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-03-29dt-bindings: add BCM6368 pincontroller binding documentationÁlvaro Fernández Rojas1-0/+217
Add binding documentation for the pincontrol core found in BCM6368 SoCs. Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210324081923.20379-15-noltari@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-03-29pinctrl: add a pincontrol driver for BCM6362Álvaro Fernández Rojas3-0/+626
Add a pincotrol driver for BCM6362. BCM6362 allows muxing individual GPIO pins to the LED controller, to be available by the integrated wifi, or other functions. It also supports overlay groups, of which only NAND is documented. Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Link: https://lore.kernel.org/r/20210324081923.20379-14-noltari@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-03-29dt-bindings: add BCM6362 GPIO sysctl binding documentationÁlvaro Fernández Rojas1-0/+236
Add binding documentation for the GPIO sysctl found in BCM6362 SoCs. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210324081923.20379-13-noltari@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-03-29dt-bindings: add BCM6362 pincontroller binding documentationÁlvaro Fernández Rojas1-0/+206
Add binding documentation for the pincontrol core found in BCM6362 SoCs. Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210324081923.20379-12-noltari@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-03-29pinctrl: add a pincontrol driver for BCM6358Álvaro Fernández Rojas3-0/+378
Add a pincotrol driver for BCM6358. BCM6358 allow overlaying different functions onto the GPIO pins. It does not support configuring individual pins but only whole groups. These groups may overlap, and still require the directions to be set correctly in the GPIO register. In addition the functions register controls other, not directly mux related functions. Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Link: https://lore.kernel.org/r/20210324081923.20379-11-noltari@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-03-29dt-bindings: add BCM6358 GPIO sysctl binding documentationÁlvaro Fernández Rojas1-0/+130
Add binding documentation for the GPIO sysctl found in BCM6358 SoCs. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210324081923.20379-10-noltari@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-03-29dt-bindings: add BCM6358 pincontroller binding documentationÁlvaro Fernández Rojas1-0/+93
Add binding documentation for the pincontrol core found in BCM6358 SoCs. Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210324081923.20379-9-noltari@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-03-29pinctrl: add a pincontrol driver for BCM6328Álvaro Fernández Rojas3-0/+413
Add a pincontrol driver for BCM6328. BCM6328 supports muxing 32 pins as GPIOs, as LEDs for the integrated LED controller, or various other functions. Its pincontrol mux registers also control other aspects, like switching the second USB port between host and device mode. Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Link: https://lore.kernel.org/r/20210324081923.20379-8-noltari@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-03-29dt-bindings: add BCM6328 GPIO sysctl binding documentationÁlvaro Fernández Rojas1-0/+162
Add binding documentation for the GPIO sysctl found in BCM6328 SoCs. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210324081923.20379-7-noltari@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-03-29dt-bindings: add BCM6328 pincontroller binding documentationÁlvaro Fernández Rojas1-0/+127
Add binding documentation for the pincontrol core found in BCM6328 SoCs. Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210324081923.20379-6-noltari@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-03-29pinctrl: bcm: add bcm63xx base codeÁlvaro Fernández Rojas4-0/+160
Add a helper for registering BCM63XX pin controllers. Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Link: https://lore.kernel.org/r/20210324081923.20379-5-noltari@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-03-29dt-bindings: improve BCM6345 GPIO binding documentationÁlvaro Fernández Rojas2-46/+86
Convert existing BCM6345 GPIO binding documentation to YAML and add binding documentation for the GPIO controller found in BCM6318, BCM6328, BCM6358, BCM6362, BCM6368 and BCM63268 SoCs. Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210324081923.20379-4-noltari@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-03-29gpio: regmap: set gpio_chip of_nodeÁlvaro Fernández Rojas2-0/+9
This is needed for properly registering GPIO regmap as a child of a regmap pin controller. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Michael Walle <michael@walle.cc> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Link: https://lore.kernel.org/r/20210324081923.20379-3-noltari@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-03-29gpio: guard gpiochip_irqchip_add_domain() with GPIOLIB_IRQCHIPÁlvaro Fernández Rojas1-0/+9
The current code doesn't check if GPIOLIB_IRQCHIP is enabled, which results in a compilation error when trying to build gpio-regmap if CONFIG_GPIOLIB_IRQCHIP isn't enabled. Fixes: 6a45b0e2589f ("gpiolib: Introduce gpiochip_irqchip_add_domain()") Suggested-by: Michael Walle <michael@walle.cc> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Michael Walle <michael@walle.cc> Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Link: https://lore.kernel.org/r/20210324081923.20379-2-noltari@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-03-29iio: imu: inv_mpu6050: Use as standalone triggerLinus Walleij1-0/+10
It may happen that the MPU6050 is the only hardware trigger available on your system such as this: > lsiio Device 003: hscdtd008a Device 001: mpu6050 Device 002: gp2ap002 Device 000: ab8500-gpadc Trigger 000: mpu6050-dev1 And when you want to use it to read periodically from your magnetometer like this: > iio_generic_buffer -a -c 100 -n hscdtd008a -t mpu6050-dev1 Then the following happens: [ 209.951334] Internal error: Oops: 5 [#1] SMP ARM (...) [ 209.981969] Hardware name: ST-Ericsson Ux5x0 platform (Device Tree Support) [ 209.988925] PC is at inv_scan_query_mpu6050+0x8/0xb8 [ 209.993914] LR is at inv_mpu6050_set_enable+0x40/0x194 This is because since we are not using any channels from the same device, the indio_dev->active_scan_mask is NULL. Just checking for that and bailing out is however not enough: we have to enable some kind of FIFO for the readout to work. So enable the temperature as a dummy FIFO and all works fine. Not suitable for backporting to stable. It is an odd corner case and does not represent a regression. Fixes: 09a642b78523 ("Invensense MPU6050 Device Driver.") Cc: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Link: https://lore.kernel.org/r/20210322132408.1003443-1-linus.walleij@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-03-29iio:accel:adis16201: Fix wrong axis assignment that prevents loadingJonathan Cameron1-1/+1
Whilst running some basic tests as part of writing up the dt-bindings for this driver (to follow), it became clear it doesn't actually load currently. iio iio:device1: tried to double register : in_incli_x_index adis16201 spi0.0: Failed to create buffer sysfs interfaces adis16201: probe of spi0.0 failed with error -16 Looks like a cut and paste / update bug. Fixes tag obviously not accurate but we don't want to bother carry thing back to before the driver moved out of staging. Fixes: 591298e54cea ("Staging: iio: accel: adis16201: Move adis16201 driver out of staging") Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: <Stable@vger.kernel.org> Cc: Himanshu Jha <himanshujha199640@gmail.com> Cc: Nuno Sá <nuno.sa@analog.com> Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com> Link: https://lore.kernel.org/r/20210321182956.844652-1-jic23@kernel.org
2021-03-29iio: dac: Convert powerdown read callbacks to sysfs_emit()Lars-Peter Clausen19-23/+23
Update DAC drivers powerdown attribute show callback to use the new sysfs_emit() function. sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it knows about the sysfs buffer specifics and has some built-in sanity checks. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20210320071405.9347-5-lars@metafoo.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-03-29iio: __iio_format_value(): Convert to sysfs_emit_at()Lars-Peter Clausen1-26/+26
sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it knows about the sysfs buffer specifics and has some built-in sanity checks. Convert __iio_format_value() and related functions to use this new interface. This conversion involves changing the signature of __iio_format_value() so that it similar to sysfs_emit_at() and takes the buffers start address and an offset where to write within the buffer. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20210320071405.9347-4-lars@metafoo.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-03-29iio: iio_enum_available_read(): Convert to sysfs_emit_at()Lars-Peter Clausen1-1/+1
sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it knows about the sysfs buffer specifics and has some built-in sanity checks. Convert the iio_enum_available_read() function to use sysfs_emit_at() instead of scnprintf(). The conversion is straight forward, the only difference is that sysfs_emit_at() takes the buffers start address and an offset as parameters and already knows about the buffer's size limit. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20210320071405.9347-3-lars@metafoo.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-03-29iio: core: Use sysfs_emit() (trivial bits)Lars-Peter Clausen4-21/+21
sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it knows about the sysfs buffer specifics and has some built-in sanity checks. This patch converts the places in the iio core that follow the pattern of return s*printf(...) to return sysfs_emit(...) Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20210320071405.9347-2-lars@metafoo.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-03-29iio:imu:mpu6050: Modify matricies to matricesGuoqing Chi1-1/+1
The plural of "matrix" is "matrices". Signed-off-by: Guoqing Chi <chiguoqing@yulong.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Link: https://lore.kernel.org/r/20210322013024.1849-1-chi962464zy@163.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-03-29erofs: add on-disk compression configurationsGao Xiang4-7/+157
Add a bitmap for available compression algorithms and a variable-sized on-disk table for compression options in preparation for upcoming big pcluster and LZMA algorithm, which follows the end of super block. To parse the compression options, the bitmap is scanned one by one. For each available algorithm, there is data followed by 2-byte `length' correspondingly (it's enough for most cases, or entire fs blocks should be used.) With such available algorithm bitmap, kernel itself can also refuse to mount such filesystem if any unsupported compression algorithm exists. Note that COMPR_CFGS feature will be enabled with BIG_PCLUSTER. Link: https://lore.kernel.org/r/20210329100012.12980-1-hsiangkao@aol.com Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
2021-03-29arm64: smp: Add missing prototype for some smp.c functionsChen Lifu2-0/+3
In commit eb631bb5bf5b ("arm64: Support arch_irq_work_raise() via self IPIs") a new function "arch_irq_work_raise" was added without a prototype. In commit d914d4d49745 ("arm64: Implement panic_smp_self_stop()") a new function "panic_smp_self_stop" was added without a prototype. We get the following warnings on W=1: arch/arm64/kernel/smp.c:842:6: warning: no previous prototype for ‘arch_irq_work_raise’ [-Wmissing-prototypes] arch/arm64/kernel/smp.c:862:6: warning: no previous prototype for ‘panic_smp_self_stop’ [-Wmissing-prototypes] Fix the warnings by: 1. Adding the prototype for 'arch_irq_work_raise' in irq_work.h 2. Adding the prototype for 'panic_smp_self_stop' in smp.h Signed-off-by: Chen Lifu <chenlifu@huawei.com> Link: https://lore.kernel.org/r/20210329034343.183974-1-chenlifu@huawei.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-03-29ARM: configs: at91: Modernize UBI defconfig partNicolas Ferre2-2/+2
UBI_GLUEBI is not so common and UBI_FASTMAP is used for several years. Make them part of a modernization of UBI defconfig options. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2021-03-29ARM: configs: at91: Add USB Video webcam classNicolas Ferre2-0/+4
USB webcams are used during validation process, add them as modules. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2021-03-29ARM: configs: at91: Add mtd tests as modulesNicolas Ferre2-0/+2
Add MTD tests as they are used in CI and for validation plan. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2021-03-29ARM: configs: at91: sama5: Add audio MIKROE PROTO boardCodrin Ciubotariu1-0/+1
Add this board as a module as it's useful for testing audio on multiple AT91 boards. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> [nicolas.ferre@microchip.com: adap to newer kernel] Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2021-03-29ARM: configs: at91: sama5: Enable LAN78XX as moduleRazvan Stefanescu1-0/+1
Include this driver as the USB-Ethernet chip is present on SAMA5D2-ICP board. Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com> [nicolas.ferre@microchip.com: update commit subject and message] Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2021-03-29ARM: configs: at91: sama5: PIOBU as built-inRazvan Stefanescu1-1/+1
Include as built-in as it's used by multiple boards. Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com> [nicolas.ferre@microchip.com: adap to newer kernel] Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2021-03-29ARM: configs: at91: sama5: MCP16502 regulator as built-inNicolas Ferre1-1/+1
This regulator is needed by several SoC or external peripherals on different boards, providing required power rails. Make it built-in to match usual use-cases. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2021-03-29ARM: configs: at91: sama5: enable the Hantro G1 engineEmil Velikov1-0/+3
The SoC features a Hantro G1 compatible engine. Enable it by default, so people can make use of it. Keep it a module, as suggested by Nicolas Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20210311154055.3496076-11-emil.l.velikov@gmail.com
2021-03-29ARM: configs: at91: sama5: update with savedefconfigEmil Velikov1-19/+18
While enabling an extra config, I've noticed that savedefconfig produced a notable delta. Split out the no-op changes for clarity sake. Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20210311154055.3496076-10-emil.l.velikov@gmail.com
2021-03-29MIPS: Loongson64: enable CONFIG_USB_SERIAL_PL2303Qing Zhang1-0/+1
When using the Loongson-3A4000 machine for serial port debugging, there is no /dev/ttyUSB* output, which makes the serial port unavailable, For convenience, we open this configuration. zhangqing@loongson-pc:~$ cat /sys/firmware/lefi/boardinfo Board Info Manufacturer : THTF Board Name : THTF-LS3A4000-7A1000-ML4A Family : LOONGSON3 BIOS Info Vendor : ZD tech Version : ZD tech-V2.1.1 ROM Size : 4 KB Release Date : 2020-06-29 zhangqing@loongson-pc:~$ lsusb Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 005 Device 003: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse Bus 005 Device 002: ID 0c45:760b Microdia USB Keyboard Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 003: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-03-29crypto: mips: add poly1305-core.S to .gitignoreIlya Lipnitskiy1-0/+2
poly1305-core.S is an auto-generated file, so it should be ignored. Fixes: a11d055e7a64 ("crypto: mips/poly1305 - incorporate OpenSSL/CRYPTOGAMS optimized implementation") Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Cc: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-03-29MIPS: ralink: mt7621: add memory detection supportChuanhong Guo4-7/+32
mt7621 has the following memory map: 0x0-0x1c000000: lower 448m memory 0x1c000000-0x2000000: peripheral registers 0x20000000-0x2400000: higher 64m memory detect_memory_region in arch/mips/kernel/setup.c only adds the first memory region and isn't suitable for 512m memory detection because it may accidentally read the memory area for peripheral registers. This commit adds memory detection capability for mt7621: 1. Add the highmem area when 512m is detected. 2. Guard memcmp from accessing peripheral registers: This only happens when a user decided to change kernel load address to 256m or higher address. Since this is a quite unusual case, we just skip 512m testing and return 256m as memory size. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> [Minor commit message reword, make mt7621_memory_detect static] Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-03-29MIPS: ralink: annotate prom_soc_init() with __initIlya Lipnitskiy6-6/+6
prom_soc_init is only called from prom_init in arch/mips/ralink/prom.c, which is already annotated with __init, so annotate prom_soc_init with __init too. Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-03-29arch: mips: fix unmet dependency for MTD_COMPLEX_MAPPINGSJulian Braha1-0/+1
When CAVIUM_OCTEON_SOC is enabled, and MTD is disabled, Kbuild gives the following warning: WARNING: unmet direct dependencies detected for MTD_COMPLEX_MAPPINGS Depends on [n]: MTD [=n] && HAS_IOMEM [=y] Selected by [y]: - CAVIUM_OCTEON_SOC [=y] && <choice> This is because CAVIUM_OCTEON_SOC selects MTD_COMPLEX_MAPPINGS, without selecting or depending on MTD, despite MTD_COMPLEX_MAPPINGS depending on MTD. Signed-off-by: Julian Braha <julianbraha@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-03-29arch: mips: fix unmet dependency for DEBUG_INFOJulian Braha1-0/+1
When SB1XXX_CORELIS is enabled, COMPILE_TEST is disabled, and DEBUG_KERNEL is disabled, Kbuild gives the following warning: WARNING: unmet direct dependencies detected for DEBUG_INFO Depends on [n]: DEBUG_KERNEL [=n] && !COMPILE_TEST [=n] Selected by [y]: - SB1XXX_CORELIS [=y] && SIBYTE_SB1xxx_SOC [=y] && !COMPILE_TEST [=n] This is because SB1XXX_CORELIS selects DEBUG_INFO without selecting or depending on DEBUG_KERNEL, despite DEBUG_INFO depending on DEBUG_KERNEL. Signed-off-by: Julian Braha <julianbraha@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-03-29MIPS/bpf: Enable bpf_probe_read{, str}() on MIPS againTiezhu Yang1-0/+1
After commit 0ebeea8ca8a4 ("bpf: Restrict bpf_probe_read{, str}() only to archs where they work"), bpf_probe_read{, str}() functions were no longer available on MIPS, so there exist some errors when running bpf program: root@linux:/home/loongson/bcc# python examples/tracing/task_switch.py bpf: Failed to load program: Invalid argument [...] 11: (85) call bpf_probe_read#4 unknown func bpf_probe_read#4 [...] Exception: Failed to load BPF program count_sched: Invalid argument ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE should be restricted to archs with non-overlapping address ranges, but they can overlap in EVA mode on MIPS, so select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE if !EVA in arch/mips/Kconfig, otherwise the bpf old helper bpf_probe_read() will not be available. This is similar with the commit d195b1d1d119 ("powerpc/bpf: Enable bpf_probe_read{, str}() on powerpc again"). Fixes: 0ebeea8ca8a4 ("bpf: Restrict bpf_probe_read{, str}() only to archs where they work") Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-03-29ARM: dts: stm32: enable the analog filter for all I2C nodes in stm32mp151Alain Volmat1-0/+6
Enable the analog filter for all I2C nodes of the stm32mp151. Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-03-29drm/ttm: switch back to static allocation limits for nowChristian König3-76/+53
The shrinker based approach still has some flaws. Especially that we need temporary pages to free up the pages allocated to the driver is problematic in a shrinker. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210324134845.2338-1-christian.koenig@amd.com
2021-03-29firmware: arm_scmi: Port clock protocol to new protocols interfaceCristian Marussi2-63/+139
Convert internals of protocol implementation to use protocol handles and expose a new protocol operations interface for SCMI driver using the new get/put common operations, while keeping the old handle->clk_ops still around to ease transition. Remove handle->clock_priv now unused. Link: https://lore.kernel.org/r/20210316124903.35011-18-cristian.marussi@arm.com Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-03-29firmware: arm_scmi: Remove legacy scmi_power_ops protocol interfaceCristian Marussi2-58/+0
Now that all the SCMI driver users have been migrated to the new interface remove the legacy interface and all the transient code. Link: https://lore.kernel.org/r/20210316124903.35011-17-cristian.marussi@arm.com Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-03-29firmware: arm_scmi: Port genpd driver to the new scmi_power_proto_ops interfaceCristian Marussi1-10/+16
Port the scmi genpd driver to the new SCMI power interface based on protocol handles and common devm_get_ops(). Link: https://lore.kernel.org/r/20210316124903.35011-16-cristian.marussi@arm.com Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-03-29firmware: arm_scmi: Port power protocol to new protocols interfaceCristian Marussi2-56/+105
Convert internals of protocol implementation to use protocol handles and expose a new protocol operations interface for SCMI driver using the new get/put common operations, while keeping the old handle->power_ops still around to ease transition. Remove handle->power_priv now unused. Link: https://lore.kernel.org/r/20210316124903.35011-15-cristian.marussi@arm.com Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>