| Age | Commit message (Collapse) | Author | Files | Lines |
|
When DRM_TOSHIBA_TC358762 is enabled and DRM_KMS_HELPER is disabled,
Kbuild gives the following warning:
WARNING: unmet direct dependencies detected for DRM_PANEL_BRIDGE
Depends on [n]: HAS_IOMEM [=y] && DRM_BRIDGE [=y] && DRM_KMS_HELPER [=n]
Selected by [y]:
- DRM_TOSHIBA_TC358762 [=y] && HAS_IOMEM [=y] && DRM [=y] && DRM_BRIDGE [=y] && OF [=y]
This is because DRM_TOSHIBA_TC358762 selects DRM_PANEL_BRIDGE,
without depending on or selecting DRM_KMS_HELPER,
despite that config option depending on DRM_KMS_HELPER.
Signed-off-by: Julian Braha <julianbraha@gmail.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210222215502.24487-1-julianbraha@gmail.com
|
|
Clang warns about the comparison when using a 32-bit phys_addr_t:
drivers/bus/mvebu-mbus.c:621:17: error: result of comparison of constant 4294967296 with expression of type 'phys_addr_t' (aka 'unsigned int') is always false [-Werror,-Wtautological-constant-out-of-range-compare]
if (reg_start >= 0x100000000ULL)
Add a cast to shut up the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20210323131952.2835509-1-arnd@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The default initializer at the start of the array causes a warning
when building with W=1:
In file included from arch/arm/mach-pxa/mainstone.c:47:
arch/arm/mach-pxa/mainstone.h:124:33: error: initialized field overwritten [-Werror=override-init]
124 | #define MAINSTONE_IRQ(x) (MAINSTONE_NR_IRQS + (x))
| ^
arch/arm/mach-pxa/mainstone.h:133:33: note: in expansion of macro 'MAINSTONE_IRQ'
133 | #define MAINSTONE_S0_CD_IRQ MAINSTONE_IRQ(9)
| ^~~~~~~~~~~~~
arch/arm/mach-pxa/mainstone.c:506:15: note: in expansion of macro 'MAINSTONE_S0_CD_IRQ'
506 | [5] = MAINSTONE_S0_CD_IRQ,
| ^~~~~~~~~~~~~~~~~~~
Rework the initializer to list each element explicitly and only once.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210323130849.2362001-1-arnd@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The clang integrated assembler fails to build one file with
a complex asm instruction:
arch/arm/mach-omap1/ams-delta-fiq-handler.S:249:2: error: invalid instruction, any one of the following would fix this:
mov r10, #(1 << (((NR_IRQS_LEGACY + 12) - NR_IRQS_LEGACY) % 32)) @ set deferred_fiq bit
^
arch/arm/mach-omap1/ams-delta-fiq-handler.S:249:2: note: instruction requires: armv6t2
mov r10, #(1 << (((NR_IRQS_LEGACY + 12) - NR_IRQS_LEGACY) % 32)) @ set deferred_fiq bit
^
arch/arm/mach-omap1/ams-delta-fiq-handler.S:249:2: note: instruction requires: thumb2
mov r10, #(1 << (((NR_IRQS_LEGACY + 12) - NR_IRQS_LEGACY) % 32)) @ set deferred_fiq bit
^
The problem is that 'NR_IRQS_LEGACY' is not defined here. Apparently
gas does not care because we first add and then subtract this number,
leading to the immediate value to be the same regardless of the
specific definition of NR_IRQS_LEGACY.
Neither the way that 'gas' just silently builds this file, nor the
way that clang IAS makes nonsensical suggestions for how to fix it
is great. Fortunately there is an easy fix, which is to #include
the header that contains the definition.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20210308153430.2530616-1-arnd@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
When building with W=1, gcc points out that the __packed attribute
on struct qm_eqcr_entry conflicts with the 8-byte alignment
attribute on struct qm_fd inside it:
drivers/soc/fsl/qbman/qman.c:189:1: error: alignment 1 of 'struct qm_eqcr_entry' is less than 8 [-Werror=packed-not-aligned]
I assume that the alignment attribute is the correct one, and
that qm_eqcr_entry cannot actually be unaligned in memory,
so add the same alignment on the outer struct.
Fixes: c535e923bb97 ("soc/fsl: Introduce DPAA 1.x QMan device driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210323131530.2619900-1-arnd@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
clang warns about an impossible condition when building with 32-bit
phys_addr_t:
arch/arm/mach-keystone/keystone.c:79:16: error: result of comparison of constant 51539607551 with expression of type 'phys_addr_t' (aka 'unsigned int') is always false [-Werror,-Wtautological-constant-out-of-range-compare]
mem_end > KEYSTONE_HIGH_PHYS_END) {
~~~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~~~
arch/arm/mach-keystone/keystone.c:78:16: error: result of comparison of constant 34359738368 with expression of type 'phys_addr_t' (aka 'unsigned int') is always true [-Werror,-Wtautological-constant-out-of-range-compare]
if (mem_start < KEYSTONE_HIGH_PHYS_START ||
~~~~~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~~~~~
Change the temporary variable to a fixed-size u64 to avoid the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Link: https://lore.kernel.org/r/20210323131814.2751750-1-arnd@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
According to bspec icl+ no longer need any extra cdclk guardband
for 64bpp formats. Make it so.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210330162416.18616-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Split the glk+ stuff into it's own version of the .min_cdclk()
vfunc.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210330162416.18616-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
commit f01195148967 ("drm/mediatek: mtk_dpi: Create connector for bridges")
broke the display support for elm device since mtk_dpi calls
drm_bridge_attach with the flag DRM_BRIDGE_ATTACH_NO_CONNECTOR
while mtk_hdmi does not yet support this flag.
Fix this by accepting DRM_BRIDGE_ATTACH_NO_CONNECTOR in bridge attachment.
Implement the drm_bridge_funcs .detect() and .get_edid() operations, and
call drm_bridge_hpd_notify() to report HPD. This provides the
necessary API to support disabling connector creation.
In addition, the field 'conn' is removed from the mtk_hdmi struct since
mtk_hdmi don't create a connector. It is replaced with a pointer
'curr_conn' that points to the current connector which can be access
through the global state.
This patch is inspired by a similar patch for bridge/synopsys/dw-hdmi.c:
commit ec971aaa6775
("drm: bridge: dw-hdmi: Make connector creation optional")
But with the difference that in mtk-hdmi only the option of not creating
a connector is supported.
Fixes: f01195148967 ("drm/mediatek: mtk_dpi: Create connector for bridges")
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
The bridge operation '.enable' and the audio cb '.get_eld'
access hdmi->conn. In the future we will want to support
the flag DRM_BRIDGE_ATTACH_NO_CONNECTOR and then we will
not have direct access to the connector.
The atomic version '.atomic_enable' allows accessing the
current connector from the state.
This patch switches the bridge to the atomic version to
prepare access to the connector in later patches.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
The TI specific compatible should be followed by the generic
"cdns,qspi-nor" compatible.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210326130034.15231-4-p.yadav@ti.com
|
|
The TI specific compatible should be followed by the generic
"cdns,qspi-nor" compatible.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210326130034.15231-3-p.yadav@ti.com
|
|
The TI specific compatible should be followed by the generic
"cdns,qspi-nor" compatible.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210326130034.15231-2-p.yadav@ti.com
|
|
This patch fixes Dan Carpenter's report that the static checker
found a problem where memcpy() was copying into too small of a buffer.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: e0639dc5805a ("NFSD introduce async copy feature")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Dai Ngo <dai.ngo@oracle.com>
|
|
Commit bce74491c300 ("powerpc/vdso: fix unnecessary rebuilds of
vgettimeofday.o") moved vdso32_wrapper.o and vdso64_wrapper.o out
of arch/powerpc/kernel/vdso[32/64]/ and removed the dependencies in
the Makefile. This leads to the wrappers not being re-build hence the
kernel embedding the old vdso library.
Add back missing dependencies to ensure vdso32_wrapper.o and vdso64_wrapper.o
are rebuilt when vdso32.so.dbg and vdso64.so.dbg are changed.
Fixes: bce74491c300 ("powerpc/vdso: fix unnecessary rebuilds of vgettimeofday.o")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8bb015bc98c51d8ced581415b7e3d157e18da7c9.1617181918.git.christophe.leroy@csgroup.eu
|
|
PPC32 encounters a KUAP fault when trying to handle a signal with
VDSO unmapped.
Kernel attempted to read user page (7fc07ec0) - exploit attempt? (uid: 0)
BUG: Unable to handle kernel data access on read at 0x7fc07ec0
Faulting instruction address: 0xc00111d4
Oops: Kernel access of bad area, sig: 11 [#1]
BE PAGE_SIZE=16K PREEMPT CMPC885
CPU: 0 PID: 353 Comm: sigreturn_vdso Not tainted 5.12.0-rc4-s3k-dev-01553-gb30c310ea220 #4814
NIP: c00111d4 LR: c0005a28 CTR: 00000000
REGS: cadb3dd0 TRAP: 0300 Not tainted (5.12.0-rc4-s3k-dev-01553-gb30c310ea220)
MSR: 00009032 <EE,ME,IR,DR,RI> CR: 48000884 XER: 20000000
DAR: 7fc07ec0 DSISR: 88000000
GPR00: c0007788 cadb3e90 c28d4a40 7fc07ec0 7fc07ed0 000004e0 7fc07ce0 00000000
GPR08: 00000001 00000001 7fc07ec0 00000000 28000282 1001b828 100a0920 00000000
GPR16: 100cac0c 100b0000 105c43a4 105c5685 100d0000 100d0000 100d0000 100b2e9e
GPR24: ffffffff 105c43c8 00000000 7fc07ec8 cadb3f40 cadb3ec8 c28d4a40 00000000
NIP [c00111d4] flush_icache_range+0x90/0xb4
LR [c0005a28] handle_signal32+0x1bc/0x1c4
Call Trace:
[cadb3e90] [100d0000] 0x100d0000 (unreliable)
[cadb3ec0] [c0007788] do_notify_resume+0x260/0x314
[cadb3f20] [c000c764] syscall_exit_prepare+0x120/0x184
[cadb3f30] [c00100b4] ret_from_syscall+0xc/0x28
--- interrupt: c00 at 0xfe807f8
NIP: 0fe807f8 LR: 10001060 CTR: c0139378
REGS: cadb3f40 TRAP: 0c00 Not tainted (5.12.0-rc4-s3k-dev-01553-gb30c310ea220)
MSR: 0000d032 <EE,PR,ME,IR,DR,RI> CR: 28000482 XER: 20000000
GPR00: 00000025 7fc081c0 77bb1690 00000000 0000000a 28000482 00000001 0ff03a38
GPR08: 0000d032 00006de5 c28d4a40 00000009 88000482 1001b828 100a0920 00000000
GPR16: 100cac0c 100b0000 105c43a4 105c5685 100d0000 100d0000 100d0000 100b2e9e
GPR24: ffffffff 105c43c8 00000000 77ba7628 10002398 10010000 10002124 00024000
NIP [0fe807f8] 0xfe807f8
LR [10001060] 0x10001060
--- interrupt: c00
Instruction dump:
38630010 7c001fac 38630010 4200fff0 7c0004ac 4c00012c 4e800020 7c001fac
2c0a0000 38630010 4082ffcc 4bffffe4 <7c00186c> 2c070000 39430010 4082ff8c
---[ end trace 3973fb72b049cb06 ]---
This is because flush_icache_range() is called on user addresses.
The same problem was detected some time ago on PPC64. It was fixed by
enabling KUAP in commit 59bee45b9712 ("powerpc/mm: Fix missing KUAP
disable in flush_coherent_icache()").
PPC32 doesn't use flush_coherent_icache() and fallbacks on
clean_dcache_range() and invalidate_icache_range().
We could fix it similarly by enabling user access in those functions,
but this is overkill for just flushing two instructions.
The two instructions are 8 bytes aligned, so a single dcbst/icbi is
enough to flush them. Do like __patch_instruction() and inline
a dcbst followed by an icbi just after the write of the instructions,
while user access is still allowed. The isync is not required because
rfi will be used to return to user.
icbi() is handled as a read so read-write user access is needed.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/bde9154e5351a5ac7bca3d59cdb5a5e8edacbb79.1617199569.git.christophe.leroy@csgroup.eu
|
|
CONFIG_PPC_FPU_REGS
An #ifdef CONFIG_PPC_FPU_REGS is missing in arch_ptrace() leading
to the following Oops because [REGSET_FPR] entry is not initialised in
native_regsets[].
[ 41.917608] BUG: Unable to handle kernel instruction fetch
[ 41.922849] Faulting instruction address: 0xff8fd228
[ 41.927760] Oops: Kernel access of bad area, sig: 11 [#1]
[ 41.933089] BE PAGE_SIZE=4K PREEMPT CMPC885
[ 41.940753] Modules linked in:
[ 41.943768] CPU: 0 PID: 366 Comm: gdb Not tainted 5.12.0-rc5-s3k-dev-01666-g7aac86a0f057-dirty #4835
[ 41.952800] NIP: ff8fd228 LR: c004d9e0 CTR: ff8fd228
[ 41.957790] REGS: caae9df0 TRAP: 0400 Not tainted (5.12.0-rc5-s3k-dev-01666-g7aac86a0f057-dirty)
[ 41.966741] MSR: 40009032 <EE,ME,IR,DR,RI> CR: 82004248 XER: 20000000
[ 41.973540]
[ 41.973540] GPR00: c004d9b4 caae9eb0 c1b64f60 c1b64520 c0713cd4 caae9eb8 c1bacdfc 00000004
[ 41.973540] GPR08: 00000200 ff8fd228 c1bac700 00001032 28004242 1061aaf4 00000001 106d64a0
[ 41.973540] GPR16: 00000000 00000000 7fa0a774 10610000 7fa0aef9 00000000 10610000 7fa0a538
[ 41.973540] GPR24: 7fa0a580 7fa0a570 c1bacc00 c1b64520 c1bacc00 caae9ee8 00000108 c0713cd4
[ 42.009685] NIP [ff8fd228] 0xff8fd228
[ 42.013300] LR [c004d9e0] __regset_get+0x100/0x124
[ 42.018036] Call Trace:
[ 42.020443] [caae9eb0] [c004d9b4] __regset_get+0xd4/0x124 (unreliable)
[ 42.026899] [caae9ee0] [c004da94] copy_regset_to_user+0x5c/0xb0
[ 42.032751] [caae9f10] [c002f640] sys_ptrace+0xe4/0x588
[ 42.037915] [caae9f30] [c0011010] ret_from_syscall+0x0/0x28
[ 42.043422] --- interrupt: c00 at 0xfd1f8e4
[ 42.047553] NIP: 0fd1f8e4 LR: 1004a688 CTR: 00000000
[ 42.052544] REGS: caae9f40 TRAP: 0c00 Not tainted (5.12.0-rc5-s3k-dev-01666-g7aac86a0f057-dirty)
[ 42.061494] MSR: 0000d032 <EE,PR,ME,IR,DR,RI> CR: 48004442 XER: 00000000
[ 42.068551]
[ 42.068551] GPR00: 0000001a 7fa0a040 77dad7e0 0000000e 00000170 00000000 7fa0a078 00000004
[ 42.068551] GPR08: 00000000 108deb88 108dda40 106d6010 44004442 1061aaf4 00000001 106d64a0
[ 42.068551] GPR16: 00000000 00000000 7fa0a774 10610000 7fa0aef9 00000000 10610000 7fa0a538
[ 42.068551] GPR24: 7fa0a580 7fa0a570 1078fe00 1078fd70 1078fd70 00000170 0fdd3244 0000000d
[ 42.104696] NIP [0fd1f8e4] 0xfd1f8e4
[ 42.108225] LR [1004a688] 0x1004a688
[ 42.111753] --- interrupt: c00
[ 42.114768] Instruction dump:
[ 42.117698] XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
[ 42.125443] XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
[ 42.133195] ---[ end trace d35616f22ab2100c ]---
Adding the missing #ifdef is not good because gdb doesn't like getting
an error when getting registers.
Instead, make ptrace return 0s when CONFIG_PPC_FPU_REGS is not set.
Fixes: b6254ced4da6 ("powerpc/signal: Don't manage floating point regs when no FPU")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/9121a44a2d50ba1af18d8aa5ada06c9a3bea8afd.1617200085.git.christophe.leroy@csgroup.eu
|
|
Memory backed or zoned null block devices may generate actual request
timeout errors due to the submission path being blocked on memory
allocation or zone locking. Unlike fake timeouts or injected timeouts,
the request submission path will call blk_mq_complete_request() or
blk_mq_end_request() for these real timeout errors, causing a double
completion and use after free situation as the block layer timeout
handler executes blk_mq_rq_timed_out() and __blk_mq_free_request() in
blk_mq_check_expired(). This problem often triggers a NULL pointer
dereference such as:
BUG: kernel NULL pointer dereference, address: 0000000000000050
RIP: 0010:blk_mq_sched_mark_restart_hctx+0x5/0x20
...
Call Trace:
dd_finish_request+0x56/0x80
blk_mq_free_request+0x37/0x130
null_handle_cmd+0xbf/0x250 [null_blk]
? null_queue_rq+0x67/0xd0 [null_blk]
blk_mq_dispatch_rq_list+0x122/0x850
__blk_mq_do_dispatch_sched+0xbb/0x2c0
__blk_mq_sched_dispatch_requests+0x13d/0x190
blk_mq_sched_dispatch_requests+0x30/0x60
__blk_mq_run_hw_queue+0x49/0x90
process_one_work+0x26c/0x580
worker_thread+0x55/0x3c0
? process_one_work+0x580/0x580
kthread+0x134/0x150
? kthread_create_worker_on_cpu+0x70/0x70
ret_from_fork+0x1f/0x30
This problem very often triggers when running the full btrfs xfstests
on a memory-backed zoned null block device in a VM with limited amount
of memory.
Avoid this by executing blk_mq_complete_request() in null_timeout_rq()
only for commands that are marked for a fake timeout completion using
the fake_timeout boolean in struct null_cmd. For timeout errors injected
through debugfs, the timeout handler will execute
blk_mq_complete_request()i as before. This is safe as the submission
path does not execute complete requests in this case.
In null_timeout_rq(), also make sure to set the command error field to
BLK_STS_TIMEOUT and to propagate this error through to the request
completion.
Reported-by: Johannes Thumshirn <Johannes.Thumshirn@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Tested-by: Johannes Thumshirn <Johannes.Thumshirn@wdc.com>
Reviewed-by: Johannes Thumshirn <Johannes.Thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210331225244.126426-1-damien.lemoal@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Another issue found by KASAN. The bit finding is buried inside the
dp_for_each_set_bit() macro (that passes on to for_each_set_bit() that
calls the bit stuff. These bit functions want an unsigned long pointer
as input and just dumbly casting leads to out-of-bounds accesses.
This fixes that.
Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: James Qian Wang <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210204131102.68658-1-carsten.haitzler@foss.arm.com
|
|
Fix the following coccicheck warning:
drivers/gpu/drm/arm/display/komeda/komeda_dev.c:97:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu/drm/arm/display/komeda/komeda_dev.c:88:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu/drm/arm/display/komeda/komeda_dev.c:65:8-16: WARNING:
use scnprintf or sprintf
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: James Qian Wang <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1617067518-31091-1-git-send-email-tiantao6@hisilicon.com
|
|
Instead of just reporting an assertion failure, report enough information
that we can start diagnosing exactly went wrong.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
The throbber could race with creation of the anchor entry and cause the
IDR to have zero entries in it, which would cause the test to fail.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
When run on a single CPU, this test would frequently access already-freed
memory. Due to timing, this bug never showed up on multi-CPU tests.
Reported-by: Chris von Recklinghausen <crecklin@redhat.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
Several test runners register individual worker threads with the
RCU library, but neglect to register the main thread, which can lead
to objects being freed while the main thread is in what appears to be
an RCU critical section.
Reported-by: Chris von Recklinghausen <crecklin@redhat.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
Commit 496121c02127 ("ACPI: processor: idle: Allow probing on platforms
with one ACPI C-state") broke CPU0 hotplug on certain systems, e.g.
I'm observing the following on AWS Nitro (e.g r5b.xlarge but other
instance types are affected as well):
# echo 0 > /sys/devices/system/cpu/cpu0/online
# echo 1 > /sys/devices/system/cpu/cpu0/online
<10 seconds delay>
-bash: echo: write error: Input/output error
In fact, the above mentioned commit only revealed the problem and did
not introduce it. On x86, to wakeup CPU an NMI is being used and
hlt_play_dead()/mwait_play_dead() loops are prepared to handle it:
/*
* If NMI wants to wake up CPU0, start CPU0.
*/
if (wakeup_cpu0())
start_cpu0();
cpuidle_play_dead() -> acpi_idle_play_dead() (which is now being called on
systems where it wasn't called before the above mentioned commit) serves
the same purpose but it doesn't have a path for CPU0. What happens now on
wakeup is:
- NMI is sent to CPU0
- wakeup_cpu0_nmi() works as expected
- we get back to while (1) loop in acpi_idle_play_dead()
- safe_halt() puts CPU0 to sleep again.
The straightforward/minimal fix is add the special handling for CPU0 on x86
and that's what the patch is doing.
Fixes: 496121c02127 ("ACPI: processor: idle: Allow probing on platforms with one ACPI C-state")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: 5.10+ <stable@vger.kernel.org> # 5.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
struct spi_transfer is declared twice. One is declared at 24th line.
The blew one is not needed though. Remove the duplicate.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Link: https://lore.kernel.org/r/20210401065904.994121-1-wanjiabing@vivo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
s/struture/structure/
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Link: https://lore.kernel.org/r/20210322065238.151920-1-unixbhaskar@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
NPL clock rate is twice the MCLK rate, so set this correctly to
avoid soundwire timeouts.
Fixes: af3d54b99764 ("ASoC: codecs: lpass-rx-macro: add support for lpass rx macro")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210331171235.24824-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
NPL clock rate is twice the MCLK rate, so set this correctly to
avoid soundwire timeouts.
Fixes: c39667ddcfc5 ("ASoC: codecs: lpass-tx-macro: add support for lpass tx macro")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210331171235.24824-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
All of the currently known MStar/SigmaStar ARMv7 SoCs have at least
one MPLL and it seems to always be at the same place so add it to
the base dtsi.
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Link: https://lore.kernel.org/r/20210301123542.2800643-4-daniel@0x0f.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
All of the currently known MStar/SigmaStar ARMv7 SoCs have an "xtal"
clock input that is usually 24MHz and an "RTC xtal" that is usually 32KHz.
The xtal input has to be connected to something so it's enabled by default.
The MSC313 and MSC313E do not bring the RTC clock input out to the pins
so it's impossible to connect it. The SSC8336 does bring the input
out to the pins but it's not always actually connected to something.
The RTC node needs to always be present because in the future the nodes
for the clock muxes will refer to it even if it's not usable.
The RTC node is disabled by default and should be enabled at the board
level if the RTC input is wired up.
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Link: https://lore.kernel.org/r/20210301123542.2800643-3-daniel@0x0f.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
All of the ARCH_MSTARV7 chips have an MPLL as the source for
peripheral clocks so select MSTAR_MSC313_MPLL.
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Link: https://lore.kernel.org/r/20210301123542.2800643-2-daniel@0x0f.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add the PTP clock to the Ethernet controller. Otherwise, the driver uses the
main clock to derive the PTP frequency which is not necessarily the correct one.
Tested with linuxptp on Olimex STMP1-OLinuXino-LIME2.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
The tca6416 chip is active low. Fix the reset-gpios value.
Fixes: e2a8fa1e0faa ("arm64: dts: mediatek: fix tca6416 reset GPIOs in pumpkin")
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Link: https://lore.kernel.org/r/20210223221826.2063911-1-fparent@baylibre.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Add the power domains names for the mt8167 SoC.
Fixes: 207f13b419a6 ("soc: mediatek: pm-domains: Add support for mt8167")
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org>
Link: https://lore.kernel.org/r/20210225175000.824661-4-enric.balletbo@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Add the power domains names for the mt8192 SoC.
Fixes: a49d5e7a89d6 ("soc: mediatek: pm-domains: Add support for mt8192")
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org>
Link: https://lore.kernel.org/r/20210225175000.824661-3-enric.balletbo@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Add the power domains names for the mt8183 SoC. This removes the debugfs
errors like the following:
debugfs: Directory 'power-domain' with parent 'pm_genpd' already present!
Fixes: eb9fa767fbe1 ("soc: mediatek: pm-domains: Add support for mt8183")
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org>
Link: https://lore.kernel.org/r/20210225175000.824661-2-enric.balletbo@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Add the power domains names to the power domain struct so we
have meaningful name for every power domain. This also removes the
following debugfs error message.
[ 2.242068] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present!
[ 2.249949] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present!
[ 2.257784] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present!
...
Fixes: 59b644b01cf4 ("soc: mediatek: Add MediaTek SCPSYS power domains")
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org>
Link: https://lore.kernel.org/r/20210225175000.824661-1-enric.balletbo@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.12, round 2:
- Fix a system failure on imx6qdl-phytec-pfla02 board when booting from
SD, by adding missing vmmc supply for SD interfaces.
- Fix address typo in i.MX8MM/Q IOMUXC_SD1_DATA0_GPIO2_IO2 definition.
* tag 'imx-fixes-5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx6: pbab01: Set vmmc supply for both SD interfaces
arm64: dts: imx8mm/q: Fix pad control of SD1_DATA0
Link: https://lore.kernel.org/r/20210330090236.GQ22955@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
More fixes for omaps for v5.12-rc cycle
Two fixes for hangs, mmc slot order fix, and a voltage typo fix:
- Remove unused duplicate sha2md5_fck clock node that can race with the
OMAP4_SHA2MD5_CLKCTRL clock node for disable for unused clocks
- Add aliases for omap4/5 mmc to put the slots back into the right
order again
- Fix typo for bionic voltage controllers that accidentally use mpu
for all instances instead of mpu, core and iva
- Fix random hangs for droid4 caused by missing fix from TI Android
kernel tree to do a dummy smc call on cpuidle wakeup path
* tag 'omap-for-v5.12/fixes-rc4-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP4: PM: update ROM return address for OSWR and OFF
ARM: OMAP4: Fix PMIC voltage domains for bionic
ARM: dts: Fix moving mmc devices with aliases for omap4 & 5
ARM: dts: Drop duplicate sha2md5_fck to fix clk_disable race
Link: https://lore.kernel.org/r/pull-1616584662-702939@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM-based SoC changes for 5.12,
please pull the following:
- Florian reverts the adding of the second level interrupt controller
for HDMI BSC interrupts since they collide with the main I2C
controller (i2c-bcm2835).
* tag 'arm-soc/for-5.12/devicetree-part2' of https://github.com/Broadcom/stblinux:
Revert "ARM: dts: bcm2711: Add the BSC interrupt controller"
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The MT8183 Pumpkin board is manufactured by OLogic and includes
a MediaTek MT8183 SoC with 2GB of RAM.
The board provides the following IOs:
* 2 USB Type-A ports
* Ethernet
* Serial UART over micro-USB port
* 1 USB Type-C dual role port
* 1 USB Type-C power only port
* 1 Jack for audio
* RPI compatible header
* MT7668 wiresless chip with Wi-Fi AC and BT 5
* Micro-HDMI port
* 2 connectors for CSI cameras
* 1 connector for DSI display
* 1 JTAG port
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Link: https://lore.kernel.org/r/20210217205945.830006-2-fparent@baylibre.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Add binding documentation for the MT8183 Pumpkin board.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210217205945.830006-1-fparent@baylibre.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Enable the CRC accelerator on all STM32MP15xx DHSOM based systems
and CRYP accelerator on all STM32MP15x[CF] DHSOM based systems.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
The sparse tool complains as follows:
drivers/soc/mediatek/mtk-mutex.c:464:24: warning:
symbol 'mtk_mutex_driver' was not declared. Should it be static?
This symbol is not used outside of mtk-mutex.c, so this
commit marks it static.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://lore.kernel.org/r/20210210075656.1096251-1-weiyongjun1@huawei.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
<p.yadav@ti.com>:
Hi,
This series picks up Ramuthevar's effort on converting the Cadence QSPI
bindings to yaml [0]. During the conversion process, I discovered that
some TI device tree files were not using the compatible correctly. Those
are fixed in patches 1-3.
[0] https://patchwork.kernel.org/project/spi-devel-general/patch/20201116031003.19062-6-vadivel.muruganx.ramuthevar@linux.intel.com/
Pratyush Yadav (3):
arm64: dts: ti: k3-j721e-mcu: Fix ospi compatible
arm64: dts: ti: k3-j7200-mcu: Fix ospi compatible
arm64: dts: ti: k3-am64-main: Fix ospi compatible
Ramuthevar Vadivel Murugan (1):
dt-bindings: spi: Convert cadence-quadspi.txt to cadence-quadspi.yaml
.../bindings/spi/cadence-quadspi.txt | 68 ---------
.../bindings/spi/cdns,qspi-nor.yaml | 143 ++++++++++++++++++
arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 2 +-
.../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 2 +-
.../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 4 +-
5 files changed, 147 insertions(+), 72 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/spi/cadence-quadspi.txt
create mode 100644 Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
--
2.30.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
|
|
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
There are the last two patches in the cleanups, this time I am not
sure what the code does and what the proper fix might be. Feedback
welcome.
Pierre-Louis Bossart (2):
ASoC: lm49453: fix useless assignment before return
ASoC: da732x: simplify code
sound/soc/codecs/da732x.c | 17 ++++++-----------
sound/soc/codecs/da732x.h | 12 ++++--------
sound/soc/codecs/lm49453.c | 2 --
3 files changed, 10 insertions(+), 21 deletions(-)
--
2.25.1
|
|
Herring <robh@kernel.org>:
This series refactors the audio-graph-port.yaml schema moving the
'port' node out of the schema and updating to use graph.yaml schema.
This allows users to define what each 'port' node is like other graph
binding users.
v2:
- Rebase on ASoC tree
Rob
Cc: alsa-devel@alsa-project.org
Cc: linux-tegra@vger.kernel.org
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Lubomir Rintel <lkundrak@v3.sk>
Cc: Mark Brown <broonie@kernel.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Sameer Pujar <spujar@nvidia.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Rob Herring (3):
ASoC: dt-bindings: Move port/ports properties out of
audio-graph-port.yaml
ASoC: dt-bindings: Use OF graph schema
ASoC: dt-bindings: socionext: Use audio-graph-port schema
.../bindings/sound/audio-graph-port.yaml | 104 ++++++++----------
.../bindings/sound/marvell,mmp-sspa.yaml | 6 +-
.../bindings/sound/nvidia,tegra186-dspk.yaml | 11 +-
.../sound/nvidia,tegra210-admaif.yaml | 11 +-
.../bindings/sound/nvidia,tegra210-ahub.yaml | 11 +-
.../bindings/sound/nvidia,tegra210-dmic.yaml | 11 +-
.../bindings/sound/nvidia,tegra210-i2s.yaml | 11 +-
.../bindings/sound/renesas,rsnd.yaml | 5 +-
.../sound/socionext,uniphier-aio.yaml | 8 +-
.../sound/socionext,uniphier-evea.yaml | 8 +-
10 files changed, 89 insertions(+), 97 deletions(-)
--
2.27.0
|
|
Morimoto <kuninori.morimoto.gx@renesas.com>:
Hi Mark
These are small clanup patches for soc-core.
[1/2] patch adds missing explanation, and
[2/2] patch fixup error handling of rtd.
Kuninori Morimoto (2):
ASoC: soc-core: add comment for rtd freeing
ASoC: soc-core: use device_unregister() if rtd allocation failed
sound/soc/soc-core.c | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
--
2.25.1
|
|
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Trivial cleanups to make cppcheck less verbose.
There should be no functionality change, except for the 'sti_uniperif'
patch where an error check was added.
Pierre-Louis Bossart (17):
ASoC: amd: renoir: acp3x-pdm-dma: remove unnecessary assignments
ASoC: atmel: fix shadowed variable
ASoC: atmel: atmel-i2s: remove useless initialization
ASoC: bcm: cygnus_ssp: remove useless initialization
ASoC: meson: axg-tdmin: remove useless assignment
ASoC: meson: axg-tdmout: remove useless assignment
ASoC: pxa: remove useless assignment
ASoC: sti: sti_uniperif: add missing error check
ASoC: sti: uniperif: align function prototypes
ASoC: stm: stm32_adfsdm: fix snprintf format string
ASoC: sunxi: sun8i-codec: clarify expression
ASoC: tegra: tegra20_das: clarify expression
ASoC: tegra: tegra20_das: align function prototypes
ASoC: ti: omap-abe-twl6040: remove useless assignment
ASoC: ti: omap-mcsp: remove duplicate test
ASoC: ux500: mop500: rename shadowing variable
ASoC: ux500: mop500: align function prototype
sound/soc/amd/renoir/acp3x-pdm-dma.c | 2 --
sound/soc/atmel/atmel-classd.c | 6 +++---
sound/soc/atmel/atmel-i2s.c | 2 +-
sound/soc/bcm/cygnus-ssp.c | 2 +-
sound/soc/meson/axg-tdmin.c | 2 +-
sound/soc/meson/axg-tdmout.c | 2 +-
sound/soc/pxa/mmp-pcm.c | 2 +-
sound/soc/sti/sti_uniperif.c | 2 ++
sound/soc/sti/uniperif.h | 4 ++--
sound/soc/stm/stm32_adfsdm.c | 2 +-
sound/soc/sunxi/sun8i-codec.c | 2 +-
sound/soc/tegra/tegra20_das.c | 8 ++++----
sound/soc/tegra/tegra20_das.h | 6 +++---
sound/soc/ti/omap-abe-twl6040.c | 2 +-
sound/soc/ti/omap-mcbsp.c | 3 +--
sound/soc/ux500/mop500.c | 6 +++---
sound/soc/ux500/mop500_ab8500.h | 2 +-
17 files changed, 27 insertions(+), 28 deletions(-)
--
2.25.1
|