summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-04-05usbip: synchronize event handler with sysfs code pathsShuah Khan1-0/+2
Fuzzing uncovered race condition between sysfs code paths in usbip drivers. Device connect/disconnect code paths initiated through sysfs interface are prone to races if disconnect happens during connect and vice versa. Use sysfs_lock to synchronize event handler with sysfs paths in usbip drivers. Cc: stable@vger.kernel.org Reported-and-tested-by: syzbot+a93fba6d384346a761e3@syzkaller.appspotmail.com Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/c5c8723d3f29dfe3d759cfaafa7dd16b0dfe2918.1616807117.git.skhan@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-05usbip: vudc synchronize sysfs code pathsShuah Khan2-0/+6
Fuzzing uncovered race condition between sysfs code paths in usbip drivers. Device connect/disconnect code paths initiated through sysfs interface are prone to races if disconnect happens during connect and vice versa. Use sysfs_lock to protect sysfs paths in vudc. Cc: stable@vger.kernel.org Reported-and-tested-by: syzbot+a93fba6d384346a761e3@syzkaller.appspotmail.com Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/caabcf3fc87bdae970509b5ff32d05bb7ce2fb15.1616807117.git.skhan@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-05usbip: stub-dev synchronize sysfs code pathsShuah Khan1-2/+9
Fuzzing uncovered race condition between sysfs code paths in usbip drivers. Device connect/disconnect code paths initiated through sysfs interface are prone to races if disconnect happens during connect and vice versa. Use sysfs_lock to protect sysfs paths in stub-dev. Cc: stable@vger.kernel.org Reported-and-tested-by: syzbot+a93fba6d384346a761e3@syzkaller.appspotmail.com Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/2b182f3561b4a065bf3bf6dce3b0e9944ba17b3f.1616807117.git.skhan@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-05usbip: add sysfs_lock to synchronize sysfs code pathsShuah Khan3-5/+29
Fuzzing uncovered race condition between sysfs code paths in usbip drivers. Device connect/disconnect code paths initiated through sysfs interface are prone to races if disconnect happens during connect and vice versa. This problem is common to all drivers while it can be reproduced easily in vhci_hcd. Add a sysfs_lock to usbip_device struct to protect the paths. Use this in vhci_hcd to protect sysfs paths. For a complete fix, usip_host and usip-vudc drivers and the event handler will have to use this lock to protect the paths. These changes will be done in subsequent patches. Cc: stable@vger.kernel.org Reported-and-tested-by: syzbot+a93fba6d384346a761e3@syzkaller.appspotmail.com Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/b6568f7beae702bbc236a545d3c020106ca75eac.1616807117.git.skhan@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-05Merge tag 'v5.12-rc5' of ↵Greg Kroah-Hartman1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-linus Peter writes: Fixes one issue with dequeuing requests after disabling endpoint for cdnsp udc driver * tag 'v5.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb: usb: cdnsp: Fixes issue with dequeuing requests after disabling endpoint
2021-04-05Merge 5.12-rc6 into tty-nextGreg Kroah-Hartman884-3902/+6978
We need the serial/tty fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-05Merge 5.12-rc6 into staging-nextGreg Kroah-Hartman493-2126/+4534
We need the staging fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-05Merge 5.12-rc6 into usb-nextGreg Kroah-Hartman492-2125/+4525
We want the USB fixes in here as well and it resolves a merge issue with xhci-mtk.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-05Merge 5.12-rc6 into driver-core-nextGreg Kroah-Hartman493-2126/+4534
We need the driver core fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-05Merge 5.12-rc6 into char-misc-nextGreg Kroah-Hartman884-3902/+6978
We need the char/misc fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-05xtensa: ISS: add GDBIO implementation to semihosting interfaceMax Filippov3-0/+92
Add GDBIO implementation for the xtensa semihosting interface. It offers less functions than the simcall interface, so make some semihosting functions optional and return error when implementation is not available. Add Kconfig menu to select semihosting implementation and add simcall and GDBIO choices there. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2021-04-05xtensa: ISS: split simcall implementation from semihosting interfaceMax Filippov2-68/+75
Disconnect existing ISS simcall implementation from the semihosting interface to allow for alternative implementations selectable at configure time. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2021-04-05xtensa: simcall.h: Change compitible to compatibleBhaskar Chowdhury1-1/+1
s/compitible/compatible/ Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Message-Id: <20210326012739.18038-1-unixbhaskar@gmail.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2021-04-05xtensa: Couple of typo fixesBhaskar Chowdhury1-2/+2
s/contans/contains/ s/desination/destination/ Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Message-Id: <20210325040832.26018-1-unixbhaskar@gmail.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2021-04-05xtensa: drop extraneous register load from initialize_mmuMax Filippov1-1/+1
Commit a9f2fc628e3a ("xtensa: cleanup MMU setup and kernel layout macros") removed the use of a2 in the beginning of the initialize_mmu macro, but left the register load that is no longer used. Remove it as well. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2021-04-05xtensa: fix pgprot_noncached assumptionsMax Filippov1-1/+3
pgprot_noncached assumes that cache bypass attribute is represented as zero. This may not always be true. Fix pgprot_noncached definition by adding _PAGE_CA_BYPASS to the result. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2021-04-05xtensa: simplify coherent_kvaddr logicMax Filippov2-38/+7
Functions coherent_kvaddr, clear_page_alias and copy_page_alias use physical address 0 as a special value that means 'this page is in the KSEG mapping and its existing virtual address has the same color as the virtual address of its future mapping, so don't map it to the TLBTEMP_BASE area'. Simplify this logic and drop special handling of low memory pages/pages with coherent mapping and always use TLBTEMP_BASE area. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2021-04-05xtensa: syscalls: switch to generic syscallhdr.shMasahiro Yamada2-41/+2
Many architectures duplicate similar shell scripts. This commit converts xtensa to use scripts/syscallhdr.sh. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Message-Id: <20210301153656.363839-3-masahiroy@kernel.org> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2021-04-05xtensa: syscalls: switch to generic syscalltbl.shMasahiro Yamada3-39/+3
Many architectures duplicate similar shell scripts. This commit converts xtensa to use scripts/syscalltbl.sh. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Message-Id: <20210301153656.363839-2-masahiroy@kernel.org> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2021-04-05xtensa: stop filling syscall array with sys_ni_syscallMasahiro Yamada1-5/+2
arch/xtensa/kernel/syscalls/syscalltbl.sh fills missing syscall numbers with sys_ni_syscall. So, the generated arch/xtensa/include/generated/asm/syscall_table.h has no hole. Hence, the line: [0 ... __NR_syscalls - 1] = (syscall_t)&sys_ni_syscall, is meaningless. The number of generated __SYSCALL() macros is the same as __NR_syscalls (this is 442 as of v5.11). Hence, the array size, [__NR_syscalls] is unneeded. The designated initializer, '[nr] =', is also unneeded. This file does not need to know __NR_syscalls. Drop the unneeded <asm/unistd.h> include directive. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Message-Id: <20210301153656.363839-1-masahiroy@kernel.org> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2021-04-05xtensa: remove unneeded export in boot-elf/MakefileMasahiro Yamada1-3/+2
No one uses these as environment variables. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Message-Id: <20210313122342.69995-2-masahiroy@kernel.org> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2021-04-05xtensa: move CONFIG_CPU_*_ENDIAN defines to KconfigMasahiro Yamada5-22/+9
Move the definition of CONFIG_CPU_*_ENDIAN to Kconfig, the best place for CONFIG options. I slightly simplified the test code. You can use the -P option to suppress linemarker generation. The grep command is unneeded. $ echo __XTENSA_EB__ | xtensa-linux-gcc -E - # 1 "<stdin>" # 1 "<built-in>" # 1 "<command-line>" # 1 "<stdin>" 1 $ echo __XTENSA_EB__ | xtensa-linux-gcc -E -P - 1 Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Message-Id: <20210313122342.69995-1-masahiroy@kernel.org> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2021-04-05xtensa: fix warning comparing pointer to 0Jiapeng Chong1-1/+1
Fix the following coccicheck warning: ./arch/xtensa/kernel/pci.c:79:17-18: WARNING comparing pointer to 0. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Message-Id: <1615360238-22508-1-git-send-email-jiapeng.chong@linux.alibaba.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2021-04-05xtensa: fix spelling mistake in Kconfig "wont" -> "won't"Colin Ian King1-1/+1
There is a spelling mistake in the Kconfig help text. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Message-Id: <20201217172427.58009-1-colin.king@canonical.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2021-04-05cgroup: misc: mark dummy misc_cg_res_total_usage() static inlineTejun Heo1-1/+1
The dummy implementation was missing static inline triggering the following compile warning on llvm. In file included from arch/x86/kvm/svm/sev.c:17: >> include/linux/misc_cgroup.h:98:15: warning: no previous prototype for function 'misc_cg_res_total_usage' [-Wmissing-prototypes] unsigned long misc_cg_res_total_usage(enum misc_res_type type) ^ include/linux/misc_cgroup.h:98:1: note: declare 'static' if the function is not intended to be used outside of this translation unit unsigned long misc_cg_res_total_usage(enum misc_res_type type) ^ static 1 warning generated. Add it. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: kernel test robot <lkp@intel.com>
2021-04-05Linux 5.12-rc6Linus Torvalds1-1/+1
2021-04-05firewire: nosy: Fix a use-after-free bug in nosy_ioctl()Zheyu Ma1-2/+7
For each device, the nosy driver allocates a pcilynx structure. A use-after-free might happen in the following scenario: 1. Open nosy device for the first time and call ioctl with command NOSY_IOC_START, then a new client A will be malloced and added to doubly linked list. 2. Open nosy device for the second time and call ioctl with command NOSY_IOC_START, then a new client B will be malloced and added to doubly linked list. 3. Call ioctl with command NOSY_IOC_START for client A, then client A will be readded to the doubly linked list. Now the doubly linked list is messed up. 4. Close the first nosy device and nosy_release will be called. In nosy_release, client A will be unlinked and freed. 5. Close the second nosy device, and client A will be referenced, resulting in UAF. The root cause of this bug is that the element in the doubly linked list is reentered into the list. Fix this bug by adding a check before inserting a client. If a client is already in the linked list, don't insert it. The following KASAN report reveals it: BUG: KASAN: use-after-free in nosy_release+0x1ea/0x210 Write of size 8 at addr ffff888102ad7360 by task poc CPU: 3 PID: 337 Comm: poc Not tainted 5.12.0-rc5+ #6 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 Call Trace: nosy_release+0x1ea/0x210 __fput+0x1e2/0x840 task_work_run+0xe8/0x180 exit_to_user_mode_prepare+0x114/0x120 syscall_exit_to_user_mode+0x1d/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae Allocated by task 337: nosy_open+0x154/0x4d0 misc_open+0x2ec/0x410 chrdev_open+0x20d/0x5a0 do_dentry_open+0x40f/0xe80 path_openat+0x1cf9/0x37b0 do_filp_open+0x16d/0x390 do_sys_openat2+0x11d/0x360 __x64_sys_open+0xfd/0x1a0 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae Freed by task 337: kfree+0x8f/0x210 nosy_release+0x158/0x210 __fput+0x1e2/0x840 task_work_run+0xe8/0x180 exit_to_user_mode_prepare+0x114/0x120 syscall_exit_to_user_mode+0x1d/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae The buggy address belongs to the object at ffff888102ad7300 which belongs to the cache kmalloc-128 of size 128 The buggy address is located 96 bytes inside of 128-byte region [ffff888102ad7300, ffff888102ad7380) [ Modified to use 'list_empty()' inside proper lock - Linus ] Link: https://lore.kernel.org/lkml/1617433116-5930-1-git-send-email-zheyuma97@gmail.com/ Reported-and-tested-by: 马哲宇 (Zheyu Ma) <zheyuma97@gmail.com> Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-04-04clk: imx: Reference preceded by freeJian Dong2-0/+2
When register failed, clk will be freed, it will generate dangling pointer problem in later reference. it should return directly. Signed-off-by: Jian Dong <dongjian@yulong.com> Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2021-04-04clk: imx8mq: Correct the pcie1 selsRichard Zhu1-2/+2
- The sys2_pll_50m should be one of the clock sels of PCIE_AUX clock. Change the sys2_pll_500m to sys2_pll_50m. - Correct one misspell of the imx8mq_pcie1_ctrl_sels definition, from "sys2_pll_250m" to "sys2_pll_333m". Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2021-04-04clk: imx8mp: Remove the none exist pcie clocksRichard Zhu2-18/+0
In the i.MX8MP PCIe design, the PCIe PHY REF clock comes from external OSC or internal system PLL. It is configured in the IOMUX_GPR14 register directly, and can't be contolled by CCM at all. Remove the PCIE PHY clock from clock driver to clean up codes. There is only one PCIe in i.MX8MP, remove the none exist second PCIe related clocks. Remove the none exsits clocks IDs together. Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Reviewed-by: Jason Liu <jason.hui.liu@nxp.com> Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2021-04-04clk: imx: Fix reparenting of UARTs not associated with stdoutAdam Ford16-252/+54
Most if not all i.MX SoC's call a function which enables all UARTS. This is a problem for users who need to re-parent the clock source, because any attempt to change the parent results in an busy error due to the fact that the clocks have been enabled already. clk: failed to reparent uart1 to sys_pll1_80m: -16 Instead of pre-initializing all UARTS, scan the device tree to see which UART clocks are associated to stdout, and only enable those UART clocks if it's needed early. This will move initialization of the remaining clocks until after the parenting of the clocks. When the clocks are shutdown, this mechanism will also disable any clocks that were pre-initialized. Fixes: 9461f7b33d11c ("clk: fix CLK_SET_RATE_GATE with clock rate protection") Suggested-by: Aisheng Dong <aisheng.dong@nxp.com> Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Tested-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2021-04-04arm64: dts: qcom: Move rmtfs memory regionSujit Kautkar2-3/+3
Move rmtfs memory region so that it does not overlap with system RAM (kernel data) when KAsan is enabled. This puts rmtfs right after mba_mem which is not supposed to increase beyond 0x94600000 Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Sujit Kautkar <sujitka@chromium.org> Link: https://lore.kernel.org/r/20210330014610.1451198-1-sujitka@chromium.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-04arm64: dts: qcom: Add sound node for sc7180-trogdor-coachzSrinivasa Rao Mandadapu1-0/+10
This is a trgodor variant, required to have sound node variable for coachz specific platform. Tested-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20210314061054.19451-3-srivasam@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-04arm64: dts: qcom: sc7180-trogdor: Add lpass dai link for I2S driverAjit Pandey1-0/+58
Add dai link for supporting lpass I2S driver, which is used for audio capture and playback. Add lpass-cpu node with pin controls and i2s primary and secondary dai-links. Tested-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Ajit Pandey <ajitp@codeaurora.org> Signed-off-by: V Sujith Kumar Reddy <vsujithk@codeaurora.org> Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org> Link: https://lore.kernel.org/r/20210314061054.19451-2-srivasam@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-04arm64: dts: qcom: use dp_phy to provide clocks to dispccDmitry Baryshkov1-2/+2
Plug dp_phy-provided clocks to display clock controller. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210331151614.3810197-8-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-04arm64: dts: qcom: sm8250: switch usb1 qmp phy to USB3+DP modeDmitry Baryshkov1-5/+18
USB1 QMP PHY is not just a USB3 PHY, but USB3+DP PHY. Change device tree nodes accordingly. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210331151614.3810197-7-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-04arm64: dts: qcom: sm8250: Add venus DT nodeBryan O'Donoghue1-0/+59
Add DT entries for the sm8250 venus encoder/decoder. Co-developed-by: Jonathan Marek <jonathan@marek.ca> Signed-off-by: Jonathan Marek <jonathan@marek.ca> Co-developed-by: Dikshita Agarwal <dikshita@qti.qualcomm.com> Signed-off-by: Dikshita Agarwal <dikshita@qti.qualcomm.com> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20210401174256.1810044-3-bryan.odonoghue@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-04arm64: dts: qcom: sm8250: Add videocc DT nodejonathan@marek.ca1-0/+14
This commit adds the videocc DTS node for sm8250. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20210401174256.1810044-2-bryan.odonoghue@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-04arm64: dts: qcom: sm8350: Add interconnectsVinod Koul1-0/+78
Add interconnect nodes and add them for modem and cdsp nodes Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20210401113252.3078466-1-vkoul@kernel.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-04arm64: dts: qcom: sm8350: Add support for PRNG EERobert Foss1-0/+7
RNG (Random Number Generator) in SM8350 features PRNG EE (Execution Environment), hence add devicetree support for it. Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://lore.kernel.org/r/20210401101536.1014560-1-robert.foss@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-04arm64: dts: qcom: sc7280: Add RPMh regulators for sc7280-idpsatya priya1-0/+212
Add regulator devices for SC7280 as RPMh regulators. This ensures that consumers are able to modify the physical state of PMIC regulators. Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: satya priya <skakit@codeaurora.org> Link: https://lore.kernel.org/r/1617192339-3760-4-git-send-email-skakit@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-04arm64: dts: qcom: sdm845: add required clocks on the gccDmitry Baryshkov1-0/+12
Specify input clocks to the SDM845's Global Clock Controller as required by the bindings. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20210402233944.273275-4-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-04svm/sev: Register SEV and SEV-ES ASIDs to the misc controllerVipin Sharma4-10/+73
Secure Encrypted Virtualization (SEV) and Secure Encrypted Virtualization - Encrypted State (SEV-ES) ASIDs are used to encrypt KVMs on AMD platform. These ASIDs are available in the limited quantities on a host. Register their capacity and usage to the misc controller for tracking via cgroups. Signed-off-by: Vipin Sharma <vipinsh@google.com> Reviewed-by: David Rientjes <rientjes@google.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2021-04-04cgroup: Miscellaneous cgroup documentation.Vipin Sharma3-2/+76
Documentation of miscellaneous cgroup controller. This new controller is used to track and limit the usage of scalar resources. Signed-off-by: Vipin Sharma <vipinsh@google.com> Reviewed-by: David Rientjes <rientjes@google.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2021-04-04cgroup: Add misc cgroup controllerVipin Sharma5-0/+546
The Miscellaneous cgroup provides the resource limiting and tracking mechanism for the scalar resources which cannot be abstracted like the other cgroup resources. Controller is enabled by the CONFIG_CGROUP_MISC config option. A resource can be added to the controller via enum misc_res_type{} in the include/linux/misc_cgroup.h file and the corresponding name via misc_res_name[] in the kernel/cgroup/misc.c file. Provider of the resource must set its capacity prior to using the resource by calling misc_cg_set_capacity(). Once a capacity is set then the resource usage can be updated using charge and uncharge APIs. All of the APIs to interact with misc controller are in include/linux/misc_cgroup.h. Miscellaneous controller provides 3 interface files. If two misc resources (res_a and res_b) are registered then: misc.capacity A read-only flat-keyed file shown only in the root cgroup. It shows miscellaneous scalar resources available on the platform along with their quantities:: $ cat misc.capacity res_a 50 res_b 10 misc.current A read-only flat-keyed file shown in the non-root cgroups. It shows the current usage of the resources in the cgroup and its children:: $ cat misc.current res_a 3 res_b 0 misc.max A read-write flat-keyed file shown in the non root cgroups. Allowed maximum usage of the resources in the cgroup and its children.:: $ cat misc.max res_a max res_b 4 Limit can be set by:: # echo res_a 1 > misc.max Limit can be set to max by:: # echo res_a max > misc.max Limits can be set more than the capacity value in the misc.capacity file. Signed-off-by: Vipin Sharma <vipinsh@google.com> Reviewed-by: David Rientjes <rientjes@google.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2021-04-04workqueue/watchdog: Make unbound workqueues aware of touch_softlockup_watchdog()Wang Qing2-13/+9
84;0;0c84;0;0c There are two workqueue-specific watchdog timestamps: + @wq_watchdog_touched_cpu (per-CPU) updated by touch_softlockup_watchdog() + @wq_watchdog_touched (global) updated by touch_all_softlockup_watchdogs() watchdog_timer_fn() checks only the global @wq_watchdog_touched for unbound workqueues. As a result, unbound workqueues are not aware of touch_softlockup_watchdog(). The watchdog might report a stall even when the unbound workqueues are blocked by a known slow code. Solution: touch_softlockup_watchdog() must touch also the global @wq_watchdog_touched timestamp. The global timestamp can no longer be used for bound workqueues because it is now updated from all CPUs. Instead, bound workqueues have to check only @wq_watchdog_touched_cpu and these timestamps have to be updated for all CPUs in touch_all_softlockup_watchdogs(). Beware: The change might cause the opposite problem. An unbound workqueue might get blocked on CPU A because of a real softlockup. The workqueue watchdog would miss it when the timestamp got touched on CPU B. It is acceptable because softlockups are detected by softlockup watchdog. The workqueue watchdog is there to detect stalls where a work never finishes, for example, because of dependencies of works queued into the same workqueue. V3: - Modify the commit message clearly according to Petr's suggestion. Signed-off-by: Wang Qing <wangqing@vivo.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2021-04-04workqueue: Move the position of debug_work_activate() in __queue_work()Zqiang1-1/+1
The debug_work_activate() is called on the premise that the work can be inserted, because if wq be in WQ_DRAINING status, insert work may be failed. Fixes: e41e704bc4f4 ("workqueue: improve destroy_workqueue() debuggability") Signed-off-by: Zqiang <qiang.zhang@windriver.com> Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2021-04-04ARM: dts: qcom: msm8974-samsung-klte: correct fuel gauge interrupt trigger levelKrzysztof Kozlowski1-1/+1
The Maxim fuel gauge datasheets describe the interrupt line as active low with a requirement of acknowledge from the CPU. The falling edge interrupt will mostly work but it's not correct. Fixes: da8d46992e67 ("ARM: dts: qcom: msm8974-klte: Add fuel gauge") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-By: Iskren Chernev <iskren.chernev@gmail.com> Tested-By: Iskren Chernev <iskren.chernev@gmail.com> Link: https://lore.kernel.org/r/20210303182816.137255-2-krzk@kernel.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-04ARM: dts: qcom: msm8974-lge-nexus5: correct fuel gauge interrupt trigger levelKrzysztof Kozlowski1-1/+1
The Maxim fuel gauge datasheets describe the interrupt line as active low with a requirement of acknowledge from the CPU. The falling edge interrupt will mostly work but it's not correct. Fixes: 45dfa741df86 ("ARM: dts: qcom: msm8974-lge-nexus5: Add fuel gauge") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Iskren Chernev <iskren.chernev@gmail.com> Link: https://lore.kernel.org/r/20210303182816.137255-1-krzk@kernel.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-04ARM: dts: qcom: msm8974-hammerhead: add mount matrix for IMULuca Weiss1-0/+4
Configure the mount matrix to account for the sensor placement on the board. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Link: https://lore.kernel.org/r/20210403105902.1867344-1-luca@z3ntu.xyz Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>