summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-04-08Merge remote-tracking branch 'arm64/for-next/fiq'Hector Martin11-70/+125
The FIQ support series, already merged into arm64, is a dependency of the M1 bring-up series and was split off after the first few versions. Signed-off-by: Hector Martin <marcan@marcan.st>
2021-04-08drm/ttm: ioremap buffer according to TTM mem caching settingOak Zeng1-0/+14
If tbo.mem.bus.caching is cached, buffer is intended to be mapped as cached from CPU. Map it with ioremap_cache. This wasn't necessary before as device memory was never mapped as cached from CPU side. It becomes necessary for aldebaran as device memory is mapped cached from CPU. Signed-off-by: Oak Zeng <Oak.Zeng@amd.com> Reviewed-by: Christian Konig <Christian.Koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/1614638628-10508-1-git-send-email-Oak.Zeng@amd.com Signed-off-by: Christian König <christian.koenig@amd.com>
2021-04-08drm/ttm: Ignore signaled move fencesFelix Kuehling1-1/+2
Move fences that have already signaled should not prevent memory allocations with no_wait_gpu. Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210227034524.21763-1-Felix.Kuehling@amd.com Signed-off-by: Christian König <christian.koenig@amd.com>
2021-04-08drm/syncobj: use newly allocated stub fencesDavid Stevens3-7/+46
Allocate a new private stub fence in drm_syncobj_assign_null_handle, instead of using a static stub fence. When userspace creates a fence with DRM_SYNCOBJ_CREATE_SIGNALED or when userspace signals a fence via DRM_IOCTL_SYNCOBJ_SIGNAL, the timestamp obtained when the fence is exported and queried with SYNC_IOC_FILE_INFO should match when the fence's status was changed from the perspective of userspace, which is during the respective ioctl. When a static stub fence started being used in by these ioctls, this behavior changed. Instead, the timestamp returned by SYNC_IOC_FILE_INFO became the first time anything used the static stub fence, which has no meaning to userspace. Signed-off-by: David Stevens <stevensd@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210408095428.3983055-1-stevensd@google.com Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com>
2021-04-08Merge commit '71b25f4df984' from tty/tty-nextHector Martin72-12132/+605
This point in gregkh's tty-next tree includes all the samsung_tty changes that were part of v3 of the M1 bring-up series, and have already been merged in. Signed-off-by: Hector Martin <marcan@marcan.st>
2021-04-08nl80211: better document CMD_ROAM behaviorJames Prestwood1-0/+3
The docs were very sparse with how exactly CMD_ROAM should be used. Specifically related to BSS information normally obtained through a user space scan. Signed-off-by: James Prestwood <prestwoj@gmail.com> Link: https://lore.kernel.org/r/20210311230333.103934-1-prestwoj@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-04-08mac80211: set sk_pacing_shift for 802.3 txpathLorenzo Bianconi1-0/+3
Similar to 802.11 txpath, set socket sk_pacing_shift for 802.3 tx path. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/7230abc48dcf940657838546cdaef7dce691ecdd.1615240733.git.lorenzo@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-04-08mac80211: don't apply flow control on management framesJohannes Berg1-3/+15
In some cases (depending on the driver, but it's true e.g. for iwlwifi) we're using an internal TXQ for management packets, mostly to simplify the code and to have a place to queue them. However, it appears that in certain cases we can confuse the code and management frames are dropped, which is certainly not what we want. Short-circuit the processing of management frames. To keep the impact minimal, only put them on the frags queue and check the tid == management only for doing that and to skip the airtime fairness checks, if applicable. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20210319232800.0e876c800866.Id2b66eb5a17f3869b776c39b5ca713272ea09d5d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-04-08x86/msr: Make locally used functions staticZhao Xuehui1-2/+2
The functions msr_read() and msr_write() are not used outside of msr.c, make them static. [ bp: Massage commit message. ] Signed-off-by: Zhao Xuehui <zhaoxuehui1@huawei.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20210408095218.152264-1-zhaoxuehui1@huawei.com
2021-04-08Merge tag 'thunderbolt-for-v5.12-rc7' of ↵Greg Kroah-Hartman1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-linus Mika writes: thunderbolt: Fixes for v5.12-rc7 This includes two fixes: - Fix memory leak in tb_retimer_add() - Off by one in tb_port_find_retimer() Both have been in linux-next without reported issues. * tag 'thunderbolt-for-v5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: thunderbolt: Fix off by one in tb_port_find_retimer() thunderbolt: Fix a leak in tb_retimer_add()
2021-04-08drm/bridge: lt8912b: Add header file <linux/gpio/consumer.h>Zhang Jianhua1-0/+1
If CONFIG_DRM_LONTIUM_LT8912B=m, the following errors will be seen while compiling lontium-lt8912b.c drivers/gpu/drm/bridge/lontium-lt8912b.c: In function ‘lt8912_hard_power_on’: drivers/gpu/drm/bridge/lontium-lt8912b.c:252:2: error: implicit declaration of function ‘gpiod_set_value_cansleep’; did you mean ‘gpio_set_value_cansleep’? [-Werror=implicit-function-declaration] gpiod_set_value_cansleep(lt->gp_reset, 0); ^~~~~~~~~~~~~~~~~~~~~~~~ gpio_set_value_cansleep drivers/gpu/drm/bridge/lontium-lt8912b.c: In function ‘lt8912_parse_dt’: drivers/gpu/drm/bridge/lontium-lt8912b.c:628:13: error: implicit declaration of function ‘devm_gpiod_get_optional’; did you mean ‘devm_gpio_request_one’? [-Werror=implicit-function-declaration] gp_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); ^~~~~~~~~~~~~~~~~~~~~~~ devm_gpio_request_one drivers/gpu/drm/bridge/lontium-lt8912b.c:628:51: error: ‘GPIOD_OUT_HIGH’ undeclared (first use in this function); did you mean ‘GPIOF_INIT_HIGH’? gp_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); ^~~~~~~~~~~~~~ GPIOF_INIT_HIGH Signed-off-by: Zhang Jianhua <zhangjianhua18@huawei.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210408093822.207917-1-zhangjianhua18@huawei.com
2021-04-08nl80211: Add missing line in nl80211_fils_discovery_policyAloka Dixit1-3/+4
Add NL80211_FILS_DISCOVERY_ATTR_TMPL explicitly in nl80211_fils_discovery_policy definition. Signed-off-by: Aloka Dixit <alokad@codeaurora.org> Link: https://lore.kernel.org/r/20210222212059.22492-1-alokad@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-04-08mac80211: remove redundant assignment of variable resultColin Ian King1-1/+1
The variable result is being assigned a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210328213729.65819-1-colin.king@canonical.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-04-08mac80211: minstrel_ht: remove unused variable 'mg' in ↵Wei Yongjun1-2/+0
minstrel_ht_next_jump_rate() GCC reports the following warning with W=1: net/mac80211/rc80211_minstrel_ht.c:871:34: warning: variable 'mg' set but not used [-Wunused-but-set-variable] 871 | struct minstrel_mcs_group_data *mg; | ^~ This variable is not used in function , this commit remove it to fix the warning. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20210326024843.987941-1-weiyongjun1@huawei.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-04-08cfg80211: regulatory: use DEFINE_SPINLOCK() for spinlockQiheng Lin1-7/+3
spinlock can be initialized automatically with DEFINE_SPINLOCK() rather than explicitly calling spin_lock_init(). Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Qiheng Lin <linqiheng@huawei.com> Link: https://lore.kernel.org/r/20210325143854.13186-1-linqiheng@huawei.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-04-08mac80211_hwsim: use DEFINE_SPINLOCK() for spinlockGuobin Huang1-6/+2
spinlock can be initialized automatically with DEFINE_SPINLOCK() rather than explicitly calling spin_lock_init(). Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Guobin Huang <huangguobin4@huawei.com> Link: https://lore.kernel.org/r/1616839160-6654-1-git-send-email-huangguobin4@huawei.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-04-08rfkill: use DEFINE_SPINLOCK() for spinlockGuobin Huang1-3/+1
spinlock can be initialized automatically with DEFINE_SPINLOCK() rather than explicitly calling spin_lock_init(). Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Guobin Huang <huangguobin4@huawei.com> Link: https://lore.kernel.org/r/1617711116-49370-1-git-send-email-huangguobin4@huawei.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-04-08virt_wifi: Return micros for BSS TSF valuesA. Cody Schuffelen1-2/+3
cfg80211_inform_bss expects to receive a TSF value, but is given the time since boot in nanoseconds. TSF values are expected to be at microsecond scale rather than nanosecond scale. Signed-off-by: A. Cody Schuffelen <schuffelen@google.com> Link: https://lore.kernel.org/r/20210318200419.1421034-1-schuffelen@google.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-04-08cfg80211: remove WARN_ON() in cfg80211_sme_connectDu Cheng1-1/+1
A WARN_ON(wdev->conn) would trigger in cfg80211_sme_connect(), if multiple send_msg(NL80211_CMD_CONNECT) system calls are made from the userland, which should be anticipated and handled by the wireless driver. Remove this WARN_ON() to prevent kernel panic if kernel is configured to "panic_on_warn". Bug reported by syzbot. Reported-by: syzbot+5f9392825de654244975@syzkaller.appspotmail.com Signed-off-by: Du Cheng <ducheng2@gmail.com> Link: https://lore.kernel.org/r/20210407162756.6101-1-ducheng2@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-04-08mac80211: fix time-is-after bug in mlmeBen Greear1-1/+4
The incorrect timeout check caused probing to happen when it did not need to happen. This in turn caused tx performance drop for around 5 seconds in ath10k-ct driver. Possibly that tx drop is due to a secondary issue, but fixing the probe to not happen when traffic is running fixes the symptom. Signed-off-by: Ben Greear <greearb@candelatech.com> Fixes: 9abf4e49830d ("mac80211: optimize station connection monitor") Acked-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20210330230749.14097-1-greearb@candelatech.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-04-08mac80211: fix TXQ AC confusionJohannes Berg1-1/+1
Normally, TXQs have txq->tid = tid; txq->ac = ieee80211_ac_from_tid(tid); However, the special management TXQ actually has txq->tid = IEEE80211_NUM_TIDS; // 16 txq->ac = IEEE80211_AC_VO; This makes sense, but ieee80211_ac_from_tid(16) is the same as ieee80211_ac_from_tid(0) which is just IEEE80211_AC_BE. Now, normally this is fine. However, if the netdev queues were stopped, then the code in ieee80211_tx_dequeue() will propagate the stop from the interface (vif->txqs_stopped[]) if the AC 2 (ieee80211_ac_from_tid(txq->tid)) is marked as stopped. On wake, however, __ieee80211_wake_txqs() will wake the TXQ if AC 0 (txq->ac) is woken up. If a driver stops all queues with ieee80211_stop_tx_queues() and then wakes them again with ieee80211_wake_tx_queues(), the ieee80211_wake_txqs() tasklet will run to resync queue and TXQ state. If all queues were woken, then what'll happen is that _ieee80211_wake_txqs() will run in order of HW queues 0-3, typically (and certainly for iwlwifi) corresponding to ACs 0-3, so it'll call __ieee80211_wake_txqs() for each AC in order 0-3. When __ieee80211_wake_txqs() is called for AC 0 (VO) that'll wake up the management TXQ (remember its tid is 16), and the driver's wake_tx_queue() will be called. That tries to get a frame, which will immediately *stop* the TXQ again, because now we check against AC 2, and AC 2 hasn't yet been marked as woken up again in sdata->vif.txqs_stopped[] since we're only in the __ieee80211_wake_txqs() call for AC 0. Thus, the management TXQ will never be started again. Fix this by checking txq->ac directly instead of calculating the AC as ieee80211_ac_from_tid(txq->tid). Fixes: adf8ed01e4fd ("mac80211: add an optional TXQ for other PS-buffered frames") Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20210323210500.bf4d50afea4a.I136ffde910486301f8818f5442e3c9bf8670a9c4@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-04-08rfkill: revert back to old userspace API by defaultJohannes Berg2-15/+72
Recompiling with the new extended version of struct rfkill_event broke systemd in *two* ways: - It used "sizeof(struct rfkill_event)" to read the event, but then complained if it actually got something != 8, this broke it on new kernels (that include the updated API); - It used sizeof(struct rfkill_event) to write a command, but didn't implement the intended expansion protocol where the kernel returns only how many bytes it accepted, and errored out due to the unexpected smaller size on kernels that didn't include the updated API. Even though systemd has now been fixed, that fix may not be always deployed, and other applications could potentially have similar issues. As such, in the interest of avoiding regressions, revert the default API "struct rfkill_event" back to the original size. Instead, add a new "struct rfkill_event_ext" that extends it by the new field, and even more clearly document that applications should be prepared for extensions in two ways: * write might only accept fewer bytes on older kernels, and will return how many to let userspace know which data may have been ignored; * read might return anything between 8 (the original size) and whatever size the application sized its buffer at, indicating how much event data was supported by the kernel. Perhaps that will help avoid such issues in the future and we won't have to come up with another version of the struct if we ever need to extend it again. Applications that want to take advantage of the new field will have to be modified to use struct rfkill_event_ext instead now, which comes with the danger of them having already been updated to use it from 'struct rfkill_event', but I found no evidence of that, and it's still relatively new. Cc: stable@vger.kernel.org # 5.11 Reported-by: Takashi Iwai <tiwai@suse.de> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v12.0.0-r4 (x86-64) Link: https://lore.kernel.org/r/20210319232510.f1a139cfdd9c.Ic5c7c9d1d28972059e132ea653a21a427c326678@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-04-08mac80211: clear sta->fast_rx when STA removed from 4-addr VLANSeevalamuthu Mariappan1-1/+3
In some race conditions, with more clients and traffic configuration, below crash is seen when making the interface down. sta->fast_rx wasn't cleared when STA gets removed from 4-addr AP_VLAN interface. The crash is due to try accessing 4-addr AP_VLAN interface's net_device (fast_rx->dev) which has been deleted already. Resolve this by clearing sta->fast_rx pointer when STA removes from a 4-addr VLAN. [ 239.449529] Unable to handle kernel NULL pointer dereference at virtual address 00000004 [ 239.449531] pgd = 80204000 ... [ 239.481496] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.4.60 #227 [ 239.481591] Hardware name: Generic DT based system [ 239.487665] task: be05b700 ti: be08e000 task.ti: be08e000 [ 239.492360] PC is at get_rps_cpu+0x2d4/0x31c [ 239.497823] LR is at 0xbe08fc54 ... [ 239.778574] [<80739740>] (get_rps_cpu) from [<8073cb10>] (netif_receive_skb_internal+0x8c/0xac) [ 239.786722] [<8073cb10>] (netif_receive_skb_internal) from [<8073d578>] (napi_gro_receive+0x48/0xc4) [ 239.795267] [<8073d578>] (napi_gro_receive) from [<c7b83e8c>] (ieee80211_mark_rx_ba_filtered_frames+0xbcc/0x12d4 [mac80211]) [ 239.804776] [<c7b83e8c>] (ieee80211_mark_rx_ba_filtered_frames [mac80211]) from [<c7b84d4c>] (ieee80211_rx_napi+0x7b8/0x8c8 [mac8 0211]) [ 239.815857] [<c7b84d4c>] (ieee80211_rx_napi [mac80211]) from [<c7f63d7c>] (ath11k_dp_process_rx+0x7bc/0x8c8 [ath11k]) [ 239.827757] [<c7f63d7c>] (ath11k_dp_process_rx [ath11k]) from [<c7f5b6c4>] (ath11k_dp_service_srng+0x2c0/0x2e0 [ath11k]) [ 239.838484] [<c7f5b6c4>] (ath11k_dp_service_srng [ath11k]) from [<7f55b7dc>] (ath11k_ahb_ext_grp_napi_poll+0x20/0x84 [ath11k_ahb] ) [ 239.849419] [<7f55b7dc>] (ath11k_ahb_ext_grp_napi_poll [ath11k_ahb]) from [<8073ce1c>] (net_rx_action+0xe0/0x28c) [ 239.860945] [<8073ce1c>] (net_rx_action) from [<80324868>] (__do_softirq+0xe4/0x228) [ 239.871269] [<80324868>] (__do_softirq) from [<80324c48>] (irq_exit+0x98/0x108) [ 239.879080] [<80324c48>] (irq_exit) from [<8035c59c>] (__handle_domain_irq+0x90/0xb4) [ 239.886114] [<8035c59c>] (__handle_domain_irq) from [<8030137c>] (gic_handle_irq+0x50/0x94) [ 239.894100] [<8030137c>] (gic_handle_irq) from [<803024c0>] (__irq_svc+0x40/0x74) Signed-off-by: Seevalamuthu Mariappan <seevalam@codeaurora.org> Link: https://lore.kernel.org/r/1616163532-3881-1-git-send-email-seevalam@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-04-08media: venus: don't de-reference NULL pointers at IRQ timeMauro Carvalho Chehab1-3/+6
Smatch is warning that: drivers/media/platform/qcom/venus/hfi_venus.c:1100 venus_isr() warn: variable dereferenced before check 'hdev' (see line 1097) The logic basically does: hdev = to_hfi_priv(core); with is translated to: hdev = core->priv; If the IRQ code can receive a NULL pointer for hdev, there's a bug there, as it will first try to de-reference the pointer, and then check if it is null. After looking at the code, it seems that this indeed can happen: Basically, the venus IRQ thread is started with: devm_request_threaded_irq() So, it will only be freed after the driver unbinds. In order to prevent the IRQ code to work with freed data, the logic at venus_hfi_destroy() sets core->priv to NULL, which would make the IRQ code to ignore any pending IRQs. There is, however a race condition, as core->priv is set to NULL only after being freed. So, we need also to move the core->priv = NULL to happen earlier. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-08ALSA: hda/realtek: Fix speaker amp setup on Acer Aspire E1Takashi Iwai1-0/+16
We've got a report about Acer Aspire E1 (PCI SSID 1025:0840) that loses the speaker output after resume. With the comparison of COEF dumps, it was identified that the COEF 0x0d bits 0x6000 corresponds to the speaker amp. This patch adds the specific quirk for the device to restore the COEF bits at the codec (re-)initialization. BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1183869 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210407095730.12560-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-04-08pinctrl: stm32: Print invalid AF warning inside stm32_pctrl_is_function_valid()Marek Vasut1-9/+4
The "invalid function %d on pin %d .\n" message is triplicated in the driver in different variants, just pull it into the function and have it once in the driver. The bonus is that all variants of the message now print the pin number and AF consistently, so it is easier to debug such pinmux problems. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabien Dessenne <fabien.dessenne@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Acked-by: Fabien Dessenne <fabien.dessenne@foss.st.com> Link: https://lore.kernel.org/r/20210406180035.279249-1-marex@denx.de Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-04-08pinctrl: bcm63xx: Fix More dependenciesRandy Dunlap1-1/+6
The additional patch below fixes all of the kconfig warnings and build errors for me. Link: https://lore.kernel.org/r/9e1cec76-1c0a-9203-7995-4c2d09b711d8@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> [Tweaked some other line in the BCMxxx] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-04-08USB: serial: io_edgeport: drop unused definitionsJohan Hovold1-68/+0
Drop unused definitions relating to a never mainlined custom proc-interface and some likewise unused string descriptor definitions. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-08USB: serial: ti_usb_3410_5052: switch to 30-second closing waitJohan Hovold1-3/+0
Switch to using the system-wide default 30-second closing-wait timeout instead of the driver specific 40-second timeout. The timeout can be changed per port using TIOCSSERIAL (setserial) if needed. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-08USB: serial: ti_usb_3410_5052: drop closing_wait module parameterJohan Hovold1-7/+1
The ti_usb_3410_5052 has supported changing the closing_wait parameter through TIOCSSERIAL (setserial) for about a decade and commit f1175daa5312 ("USB: ti_usb_3410_5052: kill custom closing_wait"). It's time to drop the corresponding driver-specific module parameter. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-08USB: serial: io_ti: switch to 30-second closing waitJohan Hovold1-3/+0
Switch to using the system-wide default 30-second closing-wait timeout instead of the driver specific 40-second timeout. The timeout can be changed per port using TIOCSSERIAL (setserial) if needed. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-08USB: serial: io_ti: drop closing_wait module parameterJohan Hovold1-5/+1
Now that all USB serial drivers supports setting the closing_wait parameter through TIOCSSERIAL (setserial) it's time to drop the corresponding io_ti module parameter. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-08USB: serial: ftdi_sio: clean up TIOCSSERIALJohan Hovold1-6/+7
The TIOCSSERIAL implementation needs to compare the old flag and divisor settings with the new to detect ASYNC_SPD changes, but there's no need to copy all driver state to the stack for that. While at it, unbreak the function parameter list. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-08USB: serial: ftdi_sio: simplify TIOCGSERIAL permission checkJohan Hovold1-12/+1
Changing the deprecated custom_divisor field is an unprivileged operation so after verifying that flag field does not contain any privileged changes both updates can be carried out by any user. Combine the two branches and drop the erroneous comment. Note that private flags field is only used for ASYNC flags so there's no need to try to retain any other bits when updating the flags. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-08USB: serial: ftdi_sio: ignore baud_base changesJohan Hovold1-4/+0
The TIOCSSERIAL error handling is inconsistent at best, but drivers tend to ignore requests to change parameters which cannot be changed rather than return an error. The FTDI driver ignores change requests for all immutable parameters but baud_base so return success also in this case for consistency. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-08USB: serial: stop reporting legacy UART typesJohan Hovold11-58/+0
The TIOCGSERIAL ioctl can be used to set and retrieve the UART type for legacy UARTs, but some USB serial drivers have been reporting back random types in order to "make user-space happy". Some applications have historically expected TIOCGSERIAL to be implemented, but judging from the Debian sources, the port type not being PORT_UNKNOWN is only used to check for the existence of legacy serial ports (ttySn). Drivers like ftdi_sio have been using PORT_UNKNOWN for twenty years (and option for 10 years) without anyone complaining so let's stop reporting back anything else. In the unlikely event that this do cause problems, this should be fixed tree-wide anyway (e.g. for all USB serial drivers and also CDC-ACM). Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-08USB: serial: add generic support for TIOCSSERIALJohan Hovold19-226/+70
TIOCSSERIAL is a horrid, underspecified, legacy interface which for most serial devices is only useful for setting the close_delay and closing_wait parameters. The closing_wait parameter determines how long to wait for the transfer buffers to drain during close and the default timeout of 30 seconds may not be sufficient at low line speeds. In other cases, when for example flow is stopped, the default timeout may instead be too long. Add generic support for TIOCSSERIAL and TIOCGSERIAL with handling of the three common parameters close_delay, closing_wait and line for the benefit of all USB serial drivers while still allowing drivers to implement further functionality through the existing callbacks. This currently includes a few drivers that report their base baud clock rate even if that is really only of interest when setting custom divisors through the deprecated ASYNC_SPD_CUST interface; an interface which only the FTDI driver actually implements. Some drivers have also been reporting back a fake UART type, something which should no longer be needed and will be dropped by a follow-on patch. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-08USB: serial: fix return value for unsupported ioctlsJohan Hovold1-3/+3
Drivers should return -ENOTTY ("Inappropriate I/O control operation") when an ioctl isn't supported, while -EINVAL is used for invalid arguments. Fix up the TIOCMGET, TIOCMSET and TIOCGICOUNT helpers which returned -EINVAL when a USB serial driver did not implement the corresponding methods. Note that the TIOCMGET and TIOCMSET helpers predate git and do not get a corresponding Fixes tag below. Fixes: d281da7ff6f7 ("tty: Make tiocgicount a handler") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-08USB: serial: whiteheat: fix TIOCGSERIAL implementationJohan Hovold1-6/+2
TIOCSSERIAL is a horrid, underspecified, legacy interface which for most serial devices is only useful for setting the close_delay and closing_wait parameters. The port parameter is used to set the I/O port and does not make any sense to use for USB serial devices. The xmit_fifo_size parameter could be used to set the hardware transmit fifo size of a legacy UART when it could not be detected, but the interface is limited to eight bits and should be left unset when not used. The close_delay and closing_wait parameters returned by TIOCGSERIAL are specified in centiseconds (not jiffies). The driver does not yet support changing these, but let's report back the default values actually used (0.5 and 30 seconds, respectively). Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-08USB: serial: usb_wwan: fix TIOCGSERIAL implementationJohan Hovold1-2/+0
TIOCSSERIAL is a horrid, underspecified, legacy interface which for most serial devices is only useful for setting the close_delay and closing_wait parameters. The port parameter is used to set the I/O port and does not make any sense to use for USB serial devices. The baud_base parameter could be used to set the UART base clock when it could not be detected but might as well be left unset when it is not known. Fix the usb_wwan TIOCGSERIAL implementation by dropping its custom interpretation of the unused port and baud_base fields, which were set to the port index and current line speed, respectively. Fixes: 02303f73373a ("usb-wwan: implement TIOCGSERIAL and TIOCSSERIAL to avoid blocking close(2)") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-08USB: serial: usb_wwan: fix unprivileged TIOCCSERIALJohan Hovold1-2/+0
TIOCSSERIAL is a horrid, underspecified, legacy interface which for most serial devices is only useful for setting the close_delay and closing_wait parameters. A non-privileged user has only ever been able to set the since long deprecated ASYNC_SPD flags and trying to change any other *supported* feature should result in -EPERM being returned. Setting the current values for any supported features should return success. Fix the usb_wwan implementation which instead indicated that the TIOCSSERIAL ioctl was not even implemented when a non-privileged user set the current values. Fixes: 02303f73373a ("usb-wwan: implement TIOCGSERIAL and TIOCSSERIAL to avoid blocking close(2)") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-08USB: serial: usb_wwan: fix TIOCSSERIAL jiffies conversionsJohan Hovold1-4/+5
The port close_delay and closing_wait parameters set by TIOCSSERIAL are specified in jiffies and not milliseconds. Add the missing conversions so that the TIOCSSERIAL works as expected also when HZ is not 1000. Fixes: 02303f73373a ("usb-wwan: implement TIOCGSERIAL and TIOCSSERIAL to avoid blocking close(2)") Cc: stable@vger.kernel.org # 2.6.38 Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-08USB: serial: ti_usb_3410_5052: fix TIOCSSERIAL permission checkJohan Hovold1-2/+7
Changing the port closing-wait parameter is a privileged operation so make sure to return -EPERM if a regular user tries to change it. Cc: stable@vger.kernel.org Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-08USB: serial: ti_usb_3410_5052: fix TIOCGSERIAL implementationJohan Hovold1-2/+2
TIOCSSERIAL is a horrid, underspecified, legacy interface which for most serial devices is only useful for setting the close_delay and closing_wait parameters. The port parameter is used to set the I/O port and does not make any sense to use for USB serial devices. The xmit_fifo_size parameter could be used to set the hardware transmit fifo size of a legacy UART when it could not be detected, but the interface is limited to eight bits and should be left unset when not used. The close_delay and closing_wait parameters returned by TIOCGSERIAL are specified in centiseconds. The driver does not yet support changing close_delay, but let's report back the default value actually used (0.5 seconds). Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-08USB: serial: ssu100: fix TIOCGSERIAL implementationJohan Hovold1-6/+3
TIOCSSERIAL is a horrid, underspecified, legacy interface which for most serial devices is only useful for setting the close_delay and closing_wait parameters. The xmit_fifo_size parameter could be used to set the hardware transmit fifo size of a legacy UART when it could not be detected, but the interface is limited to eight bits and should be left unset when not used. Similarly, baud_base could be used to set the UART base clock when it could not be detected but might as well be left unset when it is not known. The close_delay and closing_wait parameters returned by TIOCGSERIAL are specified in centiseconds (not jiffies). The driver does not yet support changing these, but let's report back the default values actually used (0.5 and 30 seconds, respectively). Fixes: 52af95459939 ("USB: add USB serial ssu100 driver") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-08USB: serial: quatech2: fix TIOCGSERIAL implementationJohan Hovold1-6/+3
TIOCSSERIAL is a horrid, underspecified, legacy interface which for most serial devices is only useful for setting the close_delay and closing_wait parameters. The xmit_fifo_size parameter could be used to set the hardware transmit fifo size of a legacy UART when it could not be detected, but the interface is limited to eight bits and should be left unset when not used. Similarly, baud_base could be used to set the UART base clock when it could not be detected but might as well be left unset when it is not known. The close_delay and closing_wait parameters returned by TIOCGSERIAL are specified in centiseconds (not jiffies). The driver does not yet support changing these, but let's report back the default values actually used (0.5 and 30 seconds, respectively). Fixes: f7a33e608d9a ("USB: serial: add quatech2 usb to serial driver") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-08USB: serial: pl2303: fix TIOCGSERIAL implementationJohan Hovold1-2/+3
TIOCSSERIAL is a horrid, underspecified, legacy interface which for most serial devices is only useful for setting the close_delay and closing_wait parameters. The port parameter is used to set the I/O port and does not make any sense to use for USB serial devices. The baud_base parameter could be used to set the UART base clock when it could not be detected but might as well be left unset when it is not known. The close_delay and closing_wait parameters returned by TIOCGSERIAL are specified in centiseconds. The driver does not yet support changing these, but let's report back the default values actually used (0.5 and 30 seconds, respectively). Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-08USB: serial: opticon: fix TIOCGSERIAL implementationJohan Hovold1-6/+3
TIOCSSERIAL is a horrid, underspecified, legacy interface which for most serial devices is only useful for setting the close_delay and closing_wait parameters. The xmit_fifo_size parameter could be used to set the hardware transmit fifo size of a legacy UART when it could not be detected, but the interface is limited to eight bits and should be left unset when not used. Similarly, baud_base could be used to set the UART base clock when it could not be detected but might as well be left unset when it is not known. The close_delay and closing_wait parameters returned by TIOCGSERIAL are specified in centiseconds (not jiffies). The driver does not yet support changing these, but let's report back the default values actually used (0.5 and 30 seconds, respectively). Fixes: faac64ad9c7b ("USB: serial: opticon: add serial line ioctls") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-08USB: serial: mos7840: fix TIOCGSERIAL implementationJohan Hovold1-8/+4
TIOCSSERIAL is a horrid, underspecified, legacy interface which for most serial devices is only useful for setting the close_delay and closing_wait parameters. The port parameter is used to set the I/O port and does not make any sense to use for USB serial devices. The xmit_fifo_size parameter could be used to set the hardware transmit fifo size of a legacy UART when it could not be detected, but the interface is limited to eight bits and should be left unset when not used. Similarly, baud_base could be used to set the UART base clock when it could not be detected but might as well be left unset when it is not known. The close_delay and closing_wait parameters returned by TIOCGSERIAL are specified in centiseconds (not jiffies). The driver does not yet support changing these, but let's report back the default values actually used (0.5 and 30 seconds, respectively). Fixes: 3f5429746d91 ("USB: Moschip 7840 USB-Serial Driver") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-08USB: serial: mos7720: fix TIOCGSERIAL implementationJohan Hovold1-8/+4
TIOCSSERIAL is a horrid, underspecified, legacy interface which for most serial devices is only useful for setting the close_delay and closing_wait parameters. The port parameter is used to set the I/O port and does not make any sense to use for USB serial devices. The xmit_fifo_size parameter could be used to set the hardware transmit fifo size of a legacy UART when it could not be detected, but the interface is limited to eight bits and should be left unset when not used. Similarly, baud_base could be used to set the UART base clock when it could not be detected but might as well be left unset when it is not known. The close_delay and closing_wait parameters returned by TIOCGSERIAL are specified in centiseconds (not jiffies). The driver does not yet support changing these, but let's report back the default values actually used (0.5 and 30 seconds, respectively). Fixes: 0f64478cbc7a ("USB: add USB serial mos7720 driver") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>