summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-04-09xfs: fix return of uninitialized value in variable errorColin Ian King1-0/+1
A previous commit removed a call to xfs_attr3_leaf_read that assigned an error return code to variable error. We now have a few early error return paths to label 'out' that return error if error is set; however error now is uninitialized so potentially garbage is being returned. Fix this by setting error to zero to restore the original behaviour where error was zero at the label 'restart'. Addresses-Coverity: ("Uninitialized scalar variable") Fixes: 07120f1abdff ("xfs: Add xfs_has_attr and subroutines") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-04-09xfs: get rid of the ip parameter to xchk_setup_*Darrick J. Wong19-93/+61
Now that the scrub context stores a pointer to the file that was used to invoke the scrub call, the struct xfs_inode pointer that we passed to all the setup functions is no longer necessary. This is only ever used if the caller wants us to scrub the metadata of the open file. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2021-04-09xfs: fix scrub and remount-ro protection when running scrubDarrick J. Wong4-17/+35
While running a new fstest that races a readonly remount with scrub running in repair mode, I observed the kernel tripping over debugging assertions in the log quiesce code that were checking that the CIL was empty. When the sysadmin runs scrub in repair mode, the scrub code allocates real transactions (with reservations) to change things, but doesn't increment the superblock writers count to block a readonly remount attempt while it is running. We don't require the userspace caller to have a writable file descriptor to run repairs, so we have to call mnt_want_write_file to obtain freeze protection and increment the writers count. It's ok to remove the call to sb_start_write for the dry-run case because commit 8321ddb2fa29 removed the behavior where scrub and fsfreeze fight over the buffer LRU. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2021-04-09KVM: arm64: Fully zero the vcpu state on resetMarc Zyngier1-0/+5
On vcpu reset, we expect all the registers to be brought back to their initial state, which happens to be a bunch of zeroes. However, some recent commit broke this, and is now leaving a bunch of registers (such as the FP state) with whatever was left by the guest. My bad. Zero the reset of the state (32bit SPSRs and FPSIMD state). Cc: stable@vger.kernel.org Fixes: e47c2055c68e ("KVM: arm64: Make struct kvm_regs userspace-only") Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-04-09KVM: arm64: Clarify vcpu reset behaviourMarc Zyngier1-0/+12
Although the KVM_ARM_VCPU_INIT documentation mention that the registers are reset to their "initial values", it doesn't describe what these values are. Describe this state explicitly. Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com> Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-04-09Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds4-19/+37
Pull vdpa/mlx5 fixes from Michael Tsirkin: "Last minute fixes. These all look like something we are better off having than not ..." * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vdpa/mlx5: Fix suspend/resume index restoration vdpa/mlx5: Fix wrong use of bit numbers vdpa/mlx5: Retrieve BAR address suitable any function vdpa/mlx5: Use the correct dma device when registering memory vdpa/mlx5: should exclude header length and fcs from mtu
2021-04-09Merge tag 'rproc-v5.12-fixes' of ↵Linus Torvalds3-2/+22
git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc Pull remoteproc fixes from Bjorn Andersson: "This fixes an issue with firmware loading on the TI K3 PRU, fixes compatibility with GNU binutils for the same and resolves link error due to a 64-bit division in the Qualcomm PIL info. It also recognizes Mathieu Poirier as co-maintainer of the remoteproc and rpmsg subsystems" * tag 'rproc-v5.12-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: remoteproc: pru: Fix firmware loading crashes on K3 SoCs remoteproc: pru: Fix loading of GNU Binutils ELF MAINTAINERS: Add co-maintainer for remoteproc/RPMSG subsystems remoteproc: qcom: pil_info: avoid 64-bit division
2021-04-09Merge tag 'for-linus-5.12b-rc7-tag' of ↵Linus Torvalds1-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fix from Juergen Gross: "A single fix of a 5.12 patch for the rather uncommon problem of running as a Xen guest with a real time kernel config" * tag 'for-linus-5.12b-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/evtchn: Change irq_info lock to raw_spinlock_t
2021-04-09ext4: delete redundant uptodate check for bufferYang Guo1-4/+2
The buffer uptodate state has been checked in function set_buffer_uptodate, there is no need use buffer_uptodate before calling set_buffer_uptodate and delete it. Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Signed-off-by: Yang Guo <guoyang2@huawei.com> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com> Link: https://lore.kernel.org/r/1617260610-29770-1-git-send-email-zhangshaokun@hisilicon.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-04-09Merge tag 'clk-imx-5.13' of ↵Stephen Boyd19-272/+58
https://git.kernel.org/pub/scm/linux/kernel/git/abelvesa/linux into clk-imx Pull i.MX clk driver updates from Abel Vesa: - Fix reparenting of UART clocks by initializing only the ones associated to stdout - Correct the PCIE clocks for i.MX8MP and i.MX8MQ - Make LPCG and SCU clocks return on registering failure * tag 'clk-imx-5.13' of https://git.kernel.org/pub/scm/linux/kernel/git/abelvesa/linux: clk: imx: Reference preceded by free clk: imx8mq: Correct the pcie1 sels clk: imx8mp: Remove the none exist pcie clocks clk: imx: Fix reparenting of UARTs not associated with stdout
2021-04-09ext4: do not set SB_ACTIVE in ext4_orphan_cleanup()Zhang Yi1-3/+0
When CONFIG_QUOTA is enabled, if we failed to mount the filesystem due to some error happens behind ext4_orphan_cleanup(), it will end up triggering a after free issue of super_block. The problem is that ext4_orphan_cleanup() will set SB_ACTIVE flag if CONFIG_QUOTA is enabled, after we cleanup the truncated inodes, the last iput() will put them into the lru list, and these inodes' pages may probably dirty and will be write back by the writeback thread, so it could be raced by freeing super_block in the error path of mount_bdev(). After check the setting of SB_ACTIVE flag in ext4_orphan_cleanup(), it was used to ensure updating the quota file properly, but evict inode and trash data immediately in the last iput does not affect the quotafile, so setting the SB_ACTIVE flag seems not required[1]. Fix this issue by just remove the SB_ACTIVE setting. [1] https://lore.kernel.org/linux-ext4/99cce8ca-e4a0-7301-840f-2ace67c551f3@huawei.com/T/#m04990cfbc4f44592421736b504afcc346b2a7c00 Cc: stable@kernel.org Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Tested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20210331033138.918975-1-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-04-09PCI: Delay after FLR of Intel DC P4510 NVMeRaphael Norwitz1-0/+1
Like the Intel DC P3700 NVMe, the Intel P4510 NVMe exhibits a timeout failure when the driver tries to interact with the device too soon after an FLR. Add a device-specific reset method that delays 250ms after doing an FLR. Link: https://lore.kernel.org/r/20210408190521.16897-1-raphael.norwitz@nutanix.com Signed-off-by: Alay Shah <alay.shah@nutanix.com> Signed-off-by: Suresh Gumpula <suresh.gumpula@nutanix.com> Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
2021-04-09Merge tag 'acpi-5.12-rc7' of ↵Linus Torvalds3-18/+14
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Fix a build issue introduced by a previous fix in the ACPI processor driver (Vitaly Kuznetsov)" * tag 'acpi-5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: processor: Fix build when CONFIG_ACPI_PROCESSOR=m
2021-04-09integrity: Add declarations to init_once void arguments.Jiele Zhao1-1/+1
init_once is a callback to kmem_cache_create. The parameter type of this function is void *, so it's better to give a explicit cast here. Signed-off-by: Jiele Zhao <unclexiaole@gmail.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-04-09ima: Fix function name error in comment.Jiele Zhao1-1/+1
The original function name was ima_path_check(). The policy parsing still supports PATH_CHECK. Commit 9bbb6cad0173 ("ima: rename ima_path_check to ima_file_check") renamed the function to ima_file_check(), but missed modifying the function name in the comment. Fixes: 9bbb6cad0173 ("ima: rename ima_path_check to ima_file_check"). Signed-off-by: Jiele Zhao <unclexiaole@gmail.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-04-09rpmsg: qcom_glink_native: fix error return code of qcom_glink_rx_data()Jia-Ju Bai1-0/+1
When idr_find() returns NULL to intent, no error return code of qcom_glink_rx_data() is assigned. To fix this bug, ret is assigned with -ENOENT in this case. Fixes: 64f95f87920d ("rpmsg: glink: Use the local intents when receiving data") Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Link: https://lore.kernel.org/r/20210306133624.17237-1-baijiaju1990@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-09vdpa/mlx5: Fix suspend/resume index restorationEli Cohen1-13/+8
When we suspend the VM, the VDPA interface will be reset. When the VM is resumed again, clear_virtqueues() will clear the available and used indices resulting in hardware virqtqueue objects becoming out of sync. We can avoid this function alltogether since qemu will clear them if required, e.g. when the VM went through a reboot. Moreover, since the hw available and used indices should always be identical on query and should be restored to the same value same value for virtqueues that complete in order, we set the single value provided by set_vq_state(). In get_vq_state() we return the value of hardware used index. Fixes: b35ccebe3ef7 ("vdpa/mlx5: Restore the hardware used index after change map") Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices") Signed-off-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20210408091047.4269-6-elic@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2021-04-09vdpa/mlx5: Fix wrong use of bit numbersEli Cohen1-2/+2
VIRTIO_F_VERSION_1 is a bit number. Use BIT_ULL() with mask conditionals. Also, in mlx5_vdpa_is_little_endian() use BIT_ULL for consistency with the rest of the code. Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices") Signed-off-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20210408091047.4269-5-elic@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2021-04-09vdpa/mlx5: Retrieve BAR address suitable any functionEli Cohen1-1/+2
struct mlx5_core_dev has a bar_addr field that contains the correct bar address for the function regardless of whether it is pci function or sub function. Use it. Fixes: 1958fc2f0712 ("net/mlx5: SF, Add auxiliary device driver") Signed-off-by: Eli Cohen <elic@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Link: https://lore.kernel.org/r/20210408091047.4269-4-elic@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2021-04-09vdpa/mlx5: Use the correct dma device when registering memoryEli Cohen1-2/+7
In cases where the vdpa instance uses a SF (sub function), the DMA device is the parent device. Use a function to retrieve the correct DMA device. Fixes: 1958fc2f0712 ("net/mlx5: SF, Add auxiliary device driver") Signed-off-by: Eli Cohen <elic@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Link: https://lore.kernel.org/r/20210408091047.4269-3-elic@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2021-04-09vdpa/mlx5: should exclude header length and fcs from mtuSi-Wei Liu2-1/+18
When feature VIRTIO_NET_F_MTU is negotiated on mlx5_vdpa, 22 extra bytes worth of MTU length is shown in guest. This is because the mlx5_query_port_max_mtu API returns the "hardware" MTU value, which does not just contain the Ethernet payload, but includes extra lengths starting from the Ethernet header up to the FCS altogether. Fix the MTU so packets won't get dropped silently. Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices") Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20210408091047.4269-2-elic@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-04-09Bluetooth: btusb: Revert Fix the autosuspend enable and disableHans de Goede1-5/+2
drivers/usb/core/hub.c: usb_new_device() contains the following: /* By default, forbid autosuspend for all devices. It will be * allowed for hubs during binding. */ usb_disable_autosuspend(udev); So for anything which is not a hub, such as btusb devices, autosuspend is disabled by default and we must call usb_enable_autosuspend(udev) to enable it. This means that the "Fix the autosuspend enable and disable" commit, which drops the usb_enable_autosuspend() call when the enable_autosuspend module option is true, is completely wrong, revert it. This reverts commit 7bd9fb058d77213130e4b3e594115c028b708e7e. Cc: Hui Wang <hui.wang@canonical.com> Fixes: 7bd9fb058d77 ("Bluetooth: btusb: Fix the autosuspend enable and disable") Acked-by: Hui Wang <hui.wang@canonical.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-04-09sched/fair: Introduce a CPU capacity comparison helperValentin Schneider1-23/+10
During load-balance, groups classified as group_misfit_task are filtered out if they do not pass group_smaller_max_cpu_capacity(<candidate group>, <local group>); which itself employs fits_capacity() to compare the sgc->max_capacity of both groups. Due to the underlying margin, fits_capacity(X, 1024) will return false for any X > 819. Tough luck, the capacity_orig's on e.g. the Pixel 4 are {261, 871, 1024}. If a CPU-bound task ends up on one of those "medium" CPUs, misfit migration will never intentionally upmigrate it to a CPU of higher capacity due to the aforementioned margin. One may argue the 20% margin of fits_capacity() is excessive in the advent of counter-enhanced load tracking (APERF/MPERF, AMUs), but one point here is that fits_capacity() is meant to compare a utilization value to a capacity value, whereas here it is being used to compare two capacity values. As CPU capacity and task utilization have different dynamics, a sensible approach here would be to add a new helper dedicated to comparing CPU capacities. Also note that comparing capacity extrema of local and source sched_group's doesn't make much sense when at the day of the day the imbalance will be pulled by a known env->dst_cpu, whose capacity can be anywhere within the local group's capacity extrema. While at it, replace group_smaller_{min, max}_cpu_capacity() with comparisons of the source group's min/max capacity and the destination CPU's capacity. Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Reviewed-by: Qais Yousef <qais.yousef@arm.com> Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org> Tested-by: Lingutla Chandrasekhar <clingutla@codeaurora.org> Link: https://lkml.kernel.org/r/20210407220628.3798191-4-valentin.schneider@arm.com
2021-04-09sched/fair: Clean up active balance nr_balance_failed trickeryValentin Schneider1-16/+15
When triggering an active load balance, sd->nr_balance_failed is set to such a value that any further can_migrate_task() using said sd will ignore the output of task_hot(). This behaviour makes sense, as active load balance intentionally preempts a rq's running task to migrate it right away, but this asynchronous write is a bit shoddy, as the stopper thread might run active_load_balance_cpu_stop before the sd->nr_balance_failed write either becomes visible to the stopper's CPU or even happens on the CPU that appended the stopper work. Add a struct lb_env flag to denote active balancing, and use it in can_migrate_task(). Remove the sd->nr_balance_failed write that served the same purpose. Cleanup the LBF_DST_PINNED active balance special case. Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org> Link: https://lkml.kernel.org/r/20210407220628.3798191-3-valentin.schneider@arm.com
2021-04-09sched/fair: Ignore percpu threads for imbalance pullsLingutla Chandrasekhar1-0/+4
During load balance, LBF_SOME_PINNED will be set if any candidate task cannot be detached due to CPU affinity constraints. This can result in setting env->sd->parent->sgc->group_imbalance, which can lead to a group being classified as group_imbalanced (rather than any of the other, lower group_type) when balancing at a higher level. In workloads involving a single task per CPU, LBF_SOME_PINNED can often be set due to per-CPU kthreads being the only other runnable tasks on any given rq. This results in changing the group classification during load-balance at higher levels when in reality there is nothing that can be done for this affinity constraint: per-CPU kthreads, as the name implies, don't get to move around (modulo hotplug shenanigans). It's not as clear for userspace tasks - a task could be in an N-CPU cpuset with N-1 offline CPUs, making it an "accidental" per-CPU task rather than an intended one. KTHREAD_IS_PER_CPU gives us an indisputable signal which we can leverage here to not set LBF_SOME_PINNED. Note that the aforementioned classification to group_imbalance (when nothing can be done) is especially problematic on big.LITTLE systems, which have a topology the likes of: DIE [ ] MC [ ][ ] 0 1 2 3 L L B B arch_scale_cpu_capacity(L) < arch_scale_cpu_capacity(B) Here, setting LBF_SOME_PINNED due to a per-CPU kthread when balancing at MC level on CPUs [0-1] will subsequently prevent CPUs [2-3] from classifying the [0-1] group as group_misfit_task when balancing at DIE level. Thus, if CPUs [0-1] are running CPU-bound (misfit) tasks, ill-timed per-CPU kthreads can significantly delay the upgmigration of said misfit tasks. Systems relying on ASYM_PACKING are likely to face similar issues. Signed-off-by: Lingutla Chandrasekhar <clingutla@codeaurora.org> [Use kthread_is_per_cpu() rather than p->nr_cpus_allowed] [Reword changelog] Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org> Link: https://lkml.kernel.org/r/20210407220628.3798191-2-valentin.schneider@arm.com
2021-04-09sched/fair: Bring back select_idle_smt(), but differentlyRik van Riel1-12/+43
Mel Gorman did some nice work in 9fe1f127b913 ("sched/fair: Merge select_idle_core/cpu()"), resulting in the kernel being more efficient at finding an idle CPU, and in tasks spending less time waiting to be run, both according to the schedstats run_delay numbers, and according to measured application latencies. Yay. The flip side of this is that we see more task migrations (about 30% more), higher cache misses, higher memory bandwidth utilization, and higher CPU use, for the same number of requests/second. This is most pronounced on a memcache type workload, which saw a consistent 1-3% increase in total CPU use on the system, due to those increased task migrations leading to higher L2 cache miss numbers, and higher memory utilization. The exclusive L3 cache on Skylake does us no favors there. On our web serving workload, that effect is usually negligible. It appears that the increased number of CPU migrations is generally a good thing, since it leads to lower cpu_delay numbers, reflecting the fact that tasks get to run faster. However, the reduced locality and the corresponding increase in L2 cache misses hurts a little. The patch below appears to fix the regression, while keeping the benefit of the lower cpu_delay numbers, by reintroducing select_idle_smt with a twist: when a socket has no idle cores, check to see if the sibling of "prev" is idle, before searching all the other CPUs. This fixes both the occasional 9% regression on the web serving workload, and the continuous 2% CPU use regression on the memcache type workload. With Mel's patches and this patch together, task migrations are still high, but L2 cache misses, memory bandwidth, and CPU time used are back down to what they were before. The p95 and p99 response times for the memcache type application improve by about 10% over what they were before Mel's patches got merged. Signed-off-by: Rik van Riel <riel@surriel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vincent Guittot <vincent.guittot@linaro.org> Link: https://lkml.kernel.org/r/20210326151932.2c187840@imladris.surriel.com
2021-04-09USB: serial: do not use tty class device for debuggingJohan Hovold3-22/+21
Use the port struct device rather than tty class device for debugging. Note that while USB serial doesn't support serdev yet (due to serdev not handling hotplugging), serdev ttys do not have a corresponding class device and would have been logged using a "(NULL device *):" prefix. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-09ext4: make prefetch_block_bitmaps defaultHarshad Shirwadkar2-8/+9
Block bitmap prefetching is needed for these allocator optimization data structures to get populated and provide better group scanning order. So, turn it on bu default. prefetch_block_bitmaps mount option is now marked as removed and a new option no_prefetch_block_bitmaps is added to disable block bitmap prefetching. Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20210401172129.189766-8-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-04-09ext4: add proc files to monitor new structuresHarshad Shirwadkar3-0/+89
This patch adds a new file "mb_structs_summary" which allows us to see the summary of the new allocator structures added in this series. Here's the sample output of file: optimize_scan: 1 max_free_order_lists: list_order_0_groups: 0 list_order_1_groups: 0 list_order_2_groups: 0 list_order_3_groups: 0 list_order_4_groups: 0 list_order_5_groups: 0 list_order_6_groups: 0 list_order_7_groups: 0 list_order_8_groups: 0 list_order_9_groups: 0 list_order_10_groups: 0 list_order_11_groups: 0 list_order_12_groups: 0 list_order_13_groups: 40 fragment_size_tree: tree_min: 16384 tree_max: 32768 tree_nodes: 40 Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com> Link: https://lore.kernel.org/r/20210401172129.189766-7-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-04-09ext4: improve cr 0 / cr 1 group scanningHarshad Shirwadkar5-15/+452
Instead of traversing through groups linearly, scan groups in specific orders at cr 0 and cr 1. At cr 0, we want to find groups that have the largest free order >= the order of the request. So, with this patch, we maintain lists for each possible order and insert each group into a list based on the largest free order in its buddy bitmap. During cr 0 allocation, we traverse these lists in the increasing order of largest free orders. This allows us to find a group with the best available cr 0 match in constant time. If nothing can be found, we fallback to cr 1 immediately. At CR1, the story is slightly different. We want to traverse in the order of increasing average fragment size. For CR1, we maintain a rb tree of groupinfos which is sorted by average fragment size. Instead of traversing linearly, at CR1, we traverse in the order of increasing average fragment size, starting at the most optimal group. This brings down cr 1 search complexity to log(num groups). For cr >= 2, we just perform the linear search as before. Also, in case of lock contention, we intermittently fallback to linear search even in CR 0 and CR 1 cases. This allows us to proceed during the allocation path even in case of high contention. There is an opportunity to do optimization at CR2 too. That's because at CR2 we only consider groups where bb_free counter (number of free blocks) is greater than the request extent size. That's left as future work. All the changes introduced in this patch are protected under a new mount option "mb_optimize_scan". With this patchset, following experiment was performed: Created a highly fragmented disk of size 65TB. The disk had no contiguous 2M regions. Following command was run consecutively for 3 times: time dd if=/dev/urandom of=file bs=2M count=10 Here are the results with and without cr 0/1 optimizations introduced in this patch: |---------+------------------------------+---------------------------| | | Without CR 0/1 Optimizations | With CR 0/1 Optimizations | |---------+------------------------------+---------------------------| | 1st run | 5m1.871s | 2m47.642s | | 2nd run | 2m28.390s | 0m0.611s | | 3rd run | 2m26.530s | 0m1.255s | |---------+------------------------------+---------------------------| Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/20210401172129.189766-6-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-04-09ext4: add MB_NUM_ORDERS macroHarshad Shirwadkar2-9/+15
A few arrays in mballoc.c use the total number of valid orders as their size. Currently, this value is set as "sb->s_blocksize_bits + 2". This makes code harder to read. So, instead add a new macro MB_NUM_ORDERS(sb) to make the code more readable. Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com> Link: https://lore.kernel.org/r/20210401172129.189766-5-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-04-09ext4: add mballoc stats proc fileHarshad Shirwadkar3-2/+80
Add new stats for measuring the performance of mballoc. This patch is forked from Artem Blagodarenko's work that can be found here: https://github.com/lustre/lustre-release/blob/master/ldiskfs/kernel_patches/patches/rhel8/ext4-simple-blockalloc.patch This patch reorganizes the stats by cr level. This is how the output looks like: mballoc: reqs: 0 success: 0 groups_scanned: 0 cr0_stats: hits: 0 groups_considered: 0 useless_loops: 0 bad_suggestions: 0 cr1_stats: hits: 0 groups_considered: 0 useless_loops: 0 bad_suggestions: 0 cr2_stats: hits: 0 groups_considered: 0 useless_loops: 0 cr3_stats: hits: 0 groups_considered: 0 useless_loops: 0 extents_scanned: 0 goal_hits: 0 2^n_hits: 0 breaks: 0 lost: 0 buddies_generated: 0/40 buddies_time_used: 0 preallocated: 0 discarded: 0 Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com> Link: https://lore.kernel.org/r/20210401172129.189766-4-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-04-09ext4: add ability to return parsed options from parse_optionsHarshad Shirwadkar1-21/+30
Before this patch, the function parse_options() was returning journal_devnum and journal_ioprio variables to the caller. This patch generalizes that interface to allow parse_options to return any parsed options to return back to the caller. In this patch series, it gets used to capture the value of "mb_optimize_scan=%u" mount option. Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com> Link: https://lore.kernel.org/r/20210401172129.189766-3-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-04-09ext4: drop s_mb_bal_lock and convert protected fields to atomicHarshad Shirwadkar2-11/+7
s_mb_buddies_generated gets used later in this patch series to determine if the cr 0 and cr 1 optimziations should be performed or not. Currently, s_mb_buddies_generated is protected under a spin_lock. In the allocation path, it is better if we don't depend on the lock and instead read the value atomically. In order to do that, we drop s_bal_lock altogether and we convert the only two protected fields by it s_mb_buddies_generated and s_mb_generation_time to atomic type. Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com> Link: https://lore.kernel.org/r/20210401172129.189766-2-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-04-09ext4: fix check to prevent false positive report of incorrect used inodesZhang Yi1-16/+32
Commit <50122847007> ("ext4: fix check to prevent initializing reserved inodes") check the block group zero and prevent initializing reserved inodes. But in some special cases, the reserved inode may not all belong to the group zero, it may exist into the second group if we format filesystem below. mkfs.ext4 -b 4096 -g 8192 -N 1024 -I 4096 /dev/sda So, it will end up triggering a false positive report of a corrupted file system. This patch fix it by avoid check reserved inodes if no free inode blocks will be zeroed. Cc: stable@kernel.org Fixes: 50122847007 ("ext4: fix check to prevent initializing reserved inodes") Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Suggested-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20210331121516.2243099-1-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-04-09Merge series "spi: spi-zynqmp-gpspi: fix some issues" from ↵Mark Brown1-26/+27
quanyang.wang@windriver.com Quanyang Wang <quanyang.wang@windriver.com>: From: Quanyang Wang <quanyang.wang@windriver.com> Hello, This series fix some issues that occurs when the gqspi driver switches to spi-mem framework. Hi Amit, I rewrite the "Subject" and "commit message" of these patches, so they look different from the ones which you reviewed before. I still keep your "Reviewed-by" and hope you will not mind. Regards, Quanyang Wang Quanyang Wang (4): spi: spi-zynqmp-gqspi: use wait_for_completion_timeout to make zynqmp_qspi_exec_op not interruptible spi: spi-zynqmp-gqspi: add mutex locking for exec_op spi: spi-zynqmp-gqspi: transmit dummy circles by using the controller's internal functionality spi: spi-zynqmp-gqspi: fix incorrect operating mode in zynqmp_qspi_read_op drivers/spi/spi-zynqmp-gqspi.c | 53 +++++++++++++++++----------------- 1 file changed, 27 insertions(+), 26 deletions(-) -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
2021-04-09PM: runtime: Add documentation for pm_runtime_resume_and_get()Alan Stern1-0/+4
Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter") added a new runtime-PM API function without updating the documentation in runtime_pm.rst. Add the missing documentation. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Fixes: dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-04-09cpufreq: intel_pstate: Simplify intel_pstate_update_perf_limits()Rafael J. Wysocki1-16/+6
Because pstate.max_freq is always equal to the product of pstate.max_pstate and pstate.scaling and, analogously, pstate.turbo_freq is always equal to the product of pstate.turbo_pstate and pstate.scaling, the result of the max_policy_perf computation in intel_pstate_update_perf_limits() is always equal to the quotient of policy_max and pstate.scaling, regardless of whether or not turbo is disabled. Analogously, the result of min_policy_perf in intel_pstate_update_perf_limits() is always equal to the quotient of policy_min and pstate.scaling. Accordingly, intel_pstate_update_perf_limits() need not check whether or not turbo is enabled at all and in order to compute max_policy_perf and min_policy_perf it can always divide policy_max and policy_min, respectively, by pstate.scaling. Make it do so. While at it, move the definition and initialization of the turbo_max local variable to the code branch using it. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Chen Yu <yu.c.chen@intel.com>
2021-04-09tty: pti: Remove Kconfig leftoversAndy Shevchenko1-30/+0
The commit 8ba59e9dee31 ("misc: pti: Remove driver for deprecated platform") got rid of deprecated drivers under TTY subsystem, but cleaned only one Kconfig entry. Remove Kconfig leftovers. Fixes: 8ba59e9dee31 ("misc: pti: Remove driver for deprecated platform") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210406131615.85432-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-09debugfs: Make debugfs_allow RO after initKees Cook1-1/+1
Since debugfs_allow is only set at boot time during __init, make it read-only after being set. Fixes: a24c6f7bc923 ("debugfs: Add access restriction option") Cc: Peter Enderborg <peter.enderborg@sony.com> Reviewed-by: Peter Enderborg <peter.enderborg@sony.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20210405213959.3079432-1-keescook@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-09Merge branch 'ima-module-signing-v4' into next-integrityMimi Zohar8-18/+76
From the series cover letter: Kernel modules are currently only signed when CONFIG_MODULE_SIG is enabled. The kernel module signing key is a self-signed CA only loaded onto the .builtin_trusted_key keyring. On secure boot enabled systems with an arch specific IMA policy enabled, but without MODULE_SIG enabled, kernel modules are not signed, nor is the kernel module signing public key loaded onto the IMA keyring. In order to load the the kernel module signing key onto the IMA trusted keyring ('.ima'), the certificate needs to be signed by a CA key either on the builtin or secondary keyrings. The original version of this patch set created and loaded a kernel-CA key onto the builtin keyring. The kernel-CA key signed the kernel module signing key, allowing it to be loaded onto the IMA trusted keyring. However, missing from this version was support for the kernel-CA to sign the hardware token certificate. Adding that support would add additional complexity. Since the kernel module signing key is embedded into the Linux kernel at build time, instead of creating and loading a kernel-CA onto the builtin trusted keyring, this version makes an exception and allows the self-signed kernel module signing key to be loaded directly onto the trusted IMA keyring.
2021-04-09ima: enable loading of build time generated key on .ima keyringNayna Jain4-11/+61
The kernel currently only loads the kernel module signing key onto the builtin trusted keyring. Load the module signing key onto the IMA keyring as well. Signed-off-by: Nayna Jain <nayna@linux.ibm.com> Acked-by: Stefan Berger <stefanb@linux.ibm.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-04-09ima: enable signing of modules with build time generated keyNayna Jain3-4/+12
The kernel build process currently only signs kernel modules when MODULE_SIG is enabled. Also, sign the kernel modules at build time when IMA_APPRAISE_MODSIG is enabled. Signed-off-by: Nayna Jain <nayna@linux.ibm.com> Acked-by: Stefan Berger <stefanb@linux.ibm.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-04-09keys: cleanup build time module signing keysNayna Jain1-3/+3
The "mrproper" target is still looking for build time generated keys in the kernel root directory instead of certs directory. Fix the path and remove the names of the files which are no longer generated. Fixes: cfc411e7fff3 ("Move certificate handling to its own directory") Signed-off-by: Nayna Jain <nayna@linux.ibm.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-04-09staging: rtl8723bs: remove MSG_8192C macro definitionsFabio Aiuto1-6/+0
remove obsolete MSG_8192C macro definitions. MSG_8192C is a private trace mechanism macro and is deactivated. (i.e. the default behaviour is _do nothing_) The only way to activate it is to manually define a debug symbol. So just remove it. Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com> Link: https://lore.kernel.org/r/97f38f269e8dabb3dd7464d49022a62cd9773657.1617971593.git.fabioaiuto83@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-09staging: rtl8723bs: remove commented out MSG_8192C logFabio Aiuto1-3/+0
remove commented out MSG_8192C log. MSG_8192C is a private trace mechanism macro and is deactivated. (i.e. the default behaviour is _do nothing_) The only way to activate it is to manually define a debug symbol. So just remove it. Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com> Link: https://lore.kernel.org/r/845969563d7c90d1b7aa3215ae29dd91afc5100c.1617971592.git.fabioaiuto83@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-09staging: rtl8723bs: remove all MSG_8192C logsFabio Aiuto2-8/+0
remove all MSG_8192C logs. MSG_8192C is a private trace mechanism macro and is deactivated. (i.e. the default behaviour is _do nothing_) The only way to activate it is to manually define a debug symbol. So just remove it. Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com> Link: https://lore.kernel.org/r/fa7f52aa90928dc86b3249ca9c5b27f92c2b071b.1617971592.git.fabioaiuto83@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-09staging: rtl8723bs: remove decl of unused static const variable in ↵Fabio Aiuto1-4/+0
os_dep/ioctl_linux.c fix following kernel test robot warning: At top level: drivers/staging/rtl8723bs/os_dep/ioctl_linux.c:36:27: warning: 'iw_operation_mode' defined but not used [-Wunused-const-variable=] 36 | static const char * const iw_operation_mode[] = { | ^~~~~~~~~~~~~~~~~ Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com> Link: https://lore.kernel.org/r/05cc97a114269ee55ac9a91c61493c885fcc0193.1617962215.git.fabioaiuto83@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-09staging: rtl8723bs: remove unused variable in os_dep/ioctl_linux.cFabio Aiuto1-3/+0
fix following kernel test robot warning: drivers/staging/rtl8723bs/os_dep/ioctl_linux.c: In function ‘rtw_wx_set_mlme’: drivers/staging/rtl8723bs/os_dep/ioctl_linux.c:1128:6: warning: variable ‘reason’ set but not used [-Wunused-but-set-variable] u16 reason; ^~~~~~ Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com> Link: https://lore.kernel.org/r/6211c4177a9ef1e677987c9ebac445df08605f40.1617962215.git.fabioaiuto83@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-09staging: rtl8723bs: remove unused variable declaration in include/rtw_security.hFabio Aiuto1-18/+0
fix following kernel test robot warning: At top level: drivers/staging/rtl8723bs/include/rtw_security.h:336:28: warning: 'K' defined but not used [-Wunused-const-variable=] 336 | static const unsigned long K[64] = { | ^ Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com> Link: https://lore.kernel.org/r/819680ab87bbe543aba966f1fe47b209d3d8a69f.1617962215.git.fabioaiuto83@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>