| Age | Commit message (Collapse) | Author | Files | Lines |
|
With commit f8425c939663 ("fuse: 32-bit user space ioctl compat for fuse
device") the matching constraints for the FUSE_DEV_IOC_CLONE ioctl command
are relaxed, limited to the testing of command type and number. As Arnd
noticed, this is wrong as it wouldn't ensure the correctness of the data
size or direction for the received FUSE device ioctl.
Fix by bringing back the comparison of the ioctl received by the FUSE
device to the originally generated FUSE_DEV_IOC_CLONE.
Fixes: f8425c939663 ("fuse: 32-bit user space ioctl compat for fuse device")
Reported-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Alessio Balsini <balsini@android.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
s/reponsible/responsible/
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
All callers of fuse_short_read already set the .page_zeroing flag, so no
need to do the tail zeroing again.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
'Maxmum' -> 'Maximum'
Signed-off-by: Connor Kuehl <ckuehl@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
There are two modes for write(2) and friends in fuse:
a) write through (update page cache, send sync WRITE request to userspace)
b) buffered write (update page cache, async writeout later)
The write through method kept all the page cache pages locked that were
used for the request. Keeping more than one page locked is deadlock prone
and Qian Cai demonstrated this with trinity fuzzing.
The reason for keeping the pages locked is that concurrent mapped reads
shouldn't try to pull possibly stale data into the page cache.
For full page writes, the easy way to fix this is to make the cached page
be the authoritative source by marking the page PG_uptodate immediately.
After this the page can be safely unlocked, since mapped/cached reads will
take the written data from the cache.
Concurrent mapped writes will now cause data in the original WRITE request
to be updated; this however doesn't cause any data inconsistency and this
scenario should be exceedingly rare anyway.
If the WRITE request returns with an error in the above case, currently the
page is not marked uptodate; this means that a concurrent read will always
read consistent data. After this patch the page is uptodate between
writing to the cache and receiving the error: there's window where a cached
read will read the wrong data. While theoretically this could be a
regression, it is unlikely to be one in practice, since this is normal for
buffered writes.
In case of a partial page write to an already uptodate page the locking is
also unnecessary, with the above caveats.
Partial write of a not uptodate page still needs to be handled. One way
would be to read the complete page before doing the write. This is not
possible, since it might break filesystems that don't expect any READ
requests when the file was opened O_WRONLY.
The other solution is to serialize the synchronous write with reads from
the partial pages. The easiest way to do this is to keep the partial pages
locked. The problem is that a write() may involve two such pages (one head
and one tail). This patch fixes it by only locking the partial tail page.
If there's a partial head page as well, then split that off as a separate
WRITE request.
Reported-by: Qian Cai <cai@lca.pw>
Link: https://lore.kernel.org/linux-fsdevel/4794a3fa3742a5e84fb0f934944204b55730829b.camel@lca.pw/
Fixes: ea9b9907b82a ("fuse: implement perform_write")
Cc: <stable@vger.kernel.org> # v2.6.26
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Removed multiple blank lines to make code better and neater.
Reported by checkpatch.
Signed-off-by: Mitali Borkar <mitaliborkar810@gmail.com>
Link: https://lore.kernel.org/r/2bfe551f152a611cc49a71a4984f41ef7ee69df5.1618380932.git.mitaliborkar810@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Removed an extra blank line after close brace '{' as it was not
necessary.
Reported by checkpatch
Signed-off-by: Mitali Borkar <mitaliborkar810@gmail.com>
Link: https://lore.kernel.org/r/40f72a84750f402c342b4685e0a2f15d27875c9a.1618380932.git.mitaliborkar810@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Removed an extra blank line before close brace as it was not necessary.
Reported by checkpatch.
Signed-off-by: Mitali Borkar <mitaliborkar810@gmail.com>
Link: https://lore.kernel.org/r/cad6a7885f30dcfabaf1ccab1fd0644416fea194.1618380932.git.mitaliborkar810@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Added spaces around binary operators like '+', '*', '|', '-', '&',
to improve readability and to meet linux kernel coding style.
Signed-off-by: Mitali Borkar <mitaliborkar810@gmail.com>
Link: https://lore.kernel.org/r/28cbc4825fdfacf5d5ea8bb688a8bd6a1c65f059.1618380932.git.mitaliborkar810@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Removed four variables that were set but not used.
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Link: https://lore.kernel.org/r/20210414061346.11423-1-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
remove dump_drv_version() and dump_log_level() function
definitions and prototypes. Those functions are unused,
and add unnecessary wrap level to log calls.
They wrap DBG_871X_SEL_NL which will be replaced by
netdev_dbg() with coccinelle script application.
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Link: https://lore.kernel.org/r/2e8dd88c053735daed95701140b2f03b4cfe2a2e.1618325614.git.fabioaiuto83@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
remove unnecessary dump_drv_version() usage.
This prepares dump_drv_version() for removal, before
coccinelle script application.
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Link: https://lore.kernel.org/r/9ce6559cac69eaebfdb07206921d14e99d2b1967.1618325614.git.fabioaiuto83@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
replace dump_drv_version() usage with netdev_dbg().
There's no need to further wrap a netdev_dbg() call
for such a low number of occurrences.
The string printed is the same contained in DBG_871X_SEL_NL macro
called inside dump_drv_version().
This is just preparation before bulk DBG_871X_SEL_NL macro
replacement by coccinelle, as the semantic patch that will be
used just replaces, doesn't remove.
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Link: https://lore.kernel.org/r/a4df375dba6c004a22cf197ff8d498d0e4f3b52e.1618325614.git.fabioaiuto83@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Removed "ledBlink_param" because it was set to the value of "pbuf" but was
never reused. This set was made by direct assignment (no helper had been
called), therefore it had no side effect to the location pointed by "pbuf".
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Link: https://lore.kernel.org/r/20210413150517.12533-1-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to devm_request_irq() (which
takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding
an original error code. Stop calling devm_request_irq() with invalid
IRQ #s.
Fixes: a26c20b1fa6d ("i2c: Renesas SH7760 I2C master driver")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Moved "static const struct channel_table[]" from include/rtw_mlme_ext.h
to core/rtw_ioctl_set.c because the latter is the only file that uses
that array of struct(s) in the whole driver. "make rtl8188eu/ W=1" output
several warnings about "'channel_table' defined but not used
[-Wunused-const-variable=]".
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Link: https://lore.kernel.org/r/20210413102033.24781-1-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to devm_request_irq() (which
takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding
an original error code. Stop calling devm_request_irq() with the
invalid IRQ #s.
Fixes: 6ccbe607132b ("i2c: add Renesas R-Car I2C driver")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Fixed checkpatch.pl warning:
CHECK: Blank lines aren't necessary before a close brace '}'
+
+ }
Signed-off-by: Mikko Talikka <mikko.talikka@live.com>
Link: https://lore.kernel.org/r/AM0PR01MB42597C4CAA1B9E51D4AE3D5E974F9@AM0PR01MB4259.eurprd01.prod.exchangelabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to devm_request_irq() (which
takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding
an original error code. Stop calling devm_request_irq() with invalid
IRQ #s.
Fixes: b5b5b32081cd ("i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to devm_request_irq() (which
takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding
an original error code. Stop calling devm_request_irq() with invalid
IRQ #s.
Fixes: ba92222ed63a ("i2c: jz4780: Add i2c bus controller driver for Ingenic JZ4780")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to devm_request_irq() (which
takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding
an original error code. Stop calling devm_request_irq() with invalid
IRQ #s.
Fixes: 5faf6e1f58b4 ("i2c: emev2: add driver")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to devm_request_irq() (which
takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding
an original error code. Stop calling devm_request_irq() with invalid
IRQ #s.
Fixes: df8eb5691c48 ("i2c: Add driver for Cadence I2C controller")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Now that we've eliminated INTEL_GEN(), IS_GEN_RANGE(), etc. from the
display code, we should also kill off our use of the IS_GEN9_* macros
too. We'll do the conversion manually this time instead of using
Coccinelle since the most logical substitution can depend heavily on the
code context, and sometimes we can keep the code simpler if we make
additional adjustments such as swapping the order of if/else arms.
v2:
- Restore a lost negation in intel_pll_is_valid().
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210407203945.1432531-1-matthew.d.roper@intel.com
(cherry picked from commit 70bfb30743d5da73058b0a2271e9c127a84fb494)
[Jani: cherry picked to topic branch to reduce conflicts]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
pm_runtime_get_sync() will increment the PM reference count even on
failure. Forgetting to put the reference again will result in a leak.
Replace it with pm_runtime_resume_and_get() to keep the usage counter
balanced.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ye Weihua <yeweihua4@huawei.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
The PM reference count is not expected to be incremented on
return in xiic_xfer and xiic_i2c_remove.
However, pm_runtime_get_sync will increment the PM reference
count even failed. Forgetting to putting operation will result
in a reference leak here.
Replace it with pm_runtime_resume_and_get to keep usage
counter balanced.
Fixes: 10b17004a74c ("i2c: xiic: Fix the clocking across bind unbind")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
The PM reference count is not expected to be incremented on
return in these stm32f7_i2c_xx serious functions.
However, pm_runtime_get_sync will increment the PM reference
count even failed. Forgetting to putting operation will result
in a reference leak here.
Replace it with pm_runtime_resume_and_get to keep usage
counter balanced.
Fixes: ea6dd25deeb5 ("i2c: stm32f7: add PM_SLEEP suspend/resume support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
The PM reference count is not expected to be incremented on
return in sprd_i2c_master_xfer() and sprd_i2c_remove().
However, pm_runtime_get_sync will increment the PM reference
count even failed. Forgetting to putting operation will result
in a reference leak here.
Replace it with pm_runtime_resume_and_get to keep usage
counter balanced.
Fixes: 8b9ec0719834 ("i2c: Add Spreadtrum I2C controller driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
The PM reference count is not expected to be incremented on
return in omap_i2c_probe() and omap_i2c_remove().
However, pm_runtime_get_sync will increment the PM reference
count even failed. Forgetting to putting operation will result
in a reference leak here. I Replace it with pm_runtime_resume_and_get
to keep usage counter balanced.
What's more, error path 'err_free_mem' seems not like a proper
name any more. So I change the name to err_disable_pm and move
pm_runtime_disable below, for pm_runtime of 'pdev->dev' should
be disabled when pm_runtime_resume_and_get fails.
Fixes: 3b0fb97c8dc4 ("I2C: OMAP: Handle error check for pm runtime")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
In i2c_imx_xfer() and i2c_imx_remove(), the pm reference count
is not expected to be incremented on return.
However, pm_runtime_get_sync will increment pm reference count
even failed. Forgetting to putting operation will result in a
reference leak here.
Replace it with pm_runtime_resume_and_get to keep usage
counter balanced.
Fixes: 3a5ee18d2a32 ("i2c: imx: implement master_xfer_atomic callback")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
The PM reference count is not expected to be incremented on
return in lpi2c_imx_master_enable.
However, pm_runtime_get_sync will increment the PM reference
count even failed. Forgetting to putting operation will result
in a reference leak here.
Replace it with pm_runtime_resume_and_get to keep usage
counter balanced.
Fixes: 13d6eb20fc79 ("i2c: imx-lpi2c: add runtime pm support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
The PM reference count is not expected to be incremented on
return in functions img_i2c_xfer and img_i2c_init.
However, pm_runtime_get_sync will increment the PM reference
count even failed. Forgetting to putting operation will result
in a reference leak here.
Replace it with pm_runtime_resume_and_get to keep usage
counter balanced.
Fixes: 93222bd9b966 ("i2c: img-scb: Add runtime PM")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
The PM reference count is not expected to be incremented on
return in functions cdns_i2c_master_xfer and cdns_reg_slave.
However, pm_runtime_get_sync will increment pm usage counter
even failed. Forgetting to putting operation will result in a
reference leak here.
Replace it with pm_runtime_resume_and_get to keep usage
counter balanced.
Fixes: 7fa32329ca03 ("i2c: cadence: Move to sensible power management")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
During the handling of CAN bus errors, a CAN error SKB is allocated
using alloc_can_err_skb(). Even if the allocation of the SKB fails,
the function continues in order to do the stats handling.
All access to the can_frame pointer (cf) should be guarded by an if
statement:
if (cf)
However, the increment of the rx_bytes stats:
netdev->stats.rx_bytes += cf->can_dlc;
dereferences the cf pointer and was not guarded by an if condition
leading to a NULL pointer dereference if the can_err_skb() function
failed.
Replacing the cf->can_dlc by the macro CAN_ERR_DLC (which is the
length of any CAN error frames) solves this NULL pointer dereference.
Fixes: 8537257874e9 ("can: etas_es58x: add core support for ETAS ES58X CAN USB interfaces")
Link: https://lore.kernel.org/r/20210413114242.2760-1-mailhol.vincent@wanadoo.fr
Reported-by: Arunachalam Santhanam <arunachalam.santhanam@in.bosch.com>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
When PINCTRL_MSM is enabled, and GPIOLIB is disabled,
Kbuild gives the following warning:
WARNING: unmet direct dependencies detected for GPIOLIB_IRQCHIP
Depends on [n]: GPIOLIB [=n]
Selected by [y]:
- PINCTRL_MSM [=y] && PINCTRL [=y] && (ARCH_QCOM || COMPILE_TEST [=y])
This is because PINCTRL_MSM selects GPIOLIB_IRQCHIP,
without selecting or depending on GPIOLIB, despite
GPIOLIB_IRQCHIP depending on GPIOLIB. Having PINCTRL_MSM
select GPIOLIB will cause a recursive dependency error.
Signed-off-by: Julian Braha <julianbraha@gmail.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210414025138.480085-1-julianbraha@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/pinctrl/intel into fixes
intel-pinctrl for v5.12-4
* Fix pin numbering per community in Intel Lewisburg driver
The following is an automated git shortlog grouped by driver:
lewisburg:
- Update number of pins in community
|
|
Fbdev's helpers for handling conflicting framebuffer drivers are
related to framebuffer apertures, not console emulation. Therefore
remove them from drm_fb_helper.h and inline them into the aperture
helpers. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210412131043.5787-4-tzimmermann@suse.de
|
|
Mass-convert all drivers from FB helpers to aperture interfaces. No
functional changes besides checking for returned errno codes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210412131043.5787-3-tzimmermann@suse.de
|
|
Platform devices might operate on firmware framebuffers, such as VESA
or EFI. Before a native driver for the graphics hardware can take over
the device, it has to remove any platform driver that operates on the
firmware framebuffer. Aperture helpers provide the infrastructure for
native drivers to remove the generic ones.
For now, this only concerns generic fbdev drivers. Code for removing
these is provided by drm_fb_helper_remove_conflicting_framebuffers() et
al. Simply wrap these functions for now. At a later point, code can be
added for generic DRM drivers to acquire firmware framebuffers.
v2:
* fix docs for drm_aperture_remove_framebuffers()
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210412131043.5787-2-tzimmermann@suse.de
|
|
Compile menu.c as an independent compilation unit.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
This helper is the same as the sample code in the NCURSES HOWTO [1],
but it is over-engineering to be used for nconf.
I do not see any good reason to use the 'float' type just for the
division by 2.
All the call-sites pass a non-NULL pointer to the first argument,
so 'if (win == NULL) win = stdscr;' is dead code.
'if (startx != 0) x = startx;' is dead code because 'x' will be
overridden some lines below, by 'x = startx + (int)temp;'.
All the call-sites pass a non-zero value to the second argument,
so 'if (starty != 0)' is always true.
getyx(win, y, x) is also dead-code because both 'y' and 'x' are
overridden.
All the call-sites pass 0 to the third parameter, so 'startx' can
be removed.
All the call-sites pass a non-zero value to the fourth parameter,
so 'if (width == 0) width = 80;' is dead code.
The window will be refreshed later, so there is no need to call
refresh() in this function.
Change the type of the last parameter from 'chtype' to 'int' to be
aligned with the prototype, 'int wattrset(WINDOW *win, int attrs);'
I also slightly cleaned up the indentation style.
[1]: https://tldp.org/HOWTO/NCURSES-Programming-HOWTO/color.html
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
This attribute is not used because it will be overridden some lines
below:
wattrset(main_window, attr_main_menu_box);
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
No one uses the return value of this function.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The current attributes setup code is strange; the array attribute[]
is set to values outside the range of the attribute_t enum.
At least,
attributes_t attributes[ATTR_MAX+1] = {0};
... should be
int attribute[ATTR_MAX+1] = {0};
Also, there is no need to hard-code the color-pair numbers in
attributes_t.
The current code is messy. Rewrite it.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The rootmenu always has a prompt even if the 'mainmenu' statement is
missing in the top Kconfig file.
conf_parse() calls menu_add_prompt(P_MENU, "Main menu", NULL) in this
case.
So, every 'menu' has a prompt.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
This reverts commit 10175ba65fde ("nconfig: Silence unused return values
from wattrset").
With this patch applied, recent GCC versions can cleanly build nconf
without "value computed is not used" warnings.
The wattrset() used to be implemented as a macro, like this:
#define wattrset(win,at) \
(NCURSES_OK_ADDR(win) \
? ((win)->_attrs = NCURSES_CAST(attr_t, at), \
OK) \
: ERR)
The GCC bugzilla [1] reported a false-positive -Wunused-value warning
in a similar test case. It was fixed by GCC 4.4.1.
Let's revert that commit, and see if somebody will claim the issue.
[1]: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=39889
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The lower 8-bit of attributes should be 0, but this code wrongly
sets it to NORMAL (=1). The correct one is A_NORMAL.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
snprintf() always terminates the destination buffer with '\0' even if
the buffer is not long enough. (In this case, the last element of the
buffer becomes '\0'.)
The explicit termination is unneeded.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
When the .config file is missing, 'make config', 'make menuconfig', etc.
uses a file listed in DEFCONFIG_LIST, if found, as base configuration.
Ususally, /boot/config-$(uname -r) exists, and is used as default.
However, when you are cross-compiling the kernel, it does not make
sense to use /boot/config-* on the build host. It should default to
arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG).
UML previously did not use DEFCONFIG_LIST at all, but it should be
able to use arch/um/configs/$(KBUILD_DEFCONFIG) as a base config file.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
sym_change_count has no good reason to be 'int' type.
sym_set_change_count() compares the old and new values after casting
both of them to (bool). I do not see any practical diffrence between
sym_set_change_count(1) and sym_add_change_count(1).
Use the boolean flag, conf_changed.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The following code in get_mext_match():
index = (index + items_num) % items_num;
... makes the program crash when items_num is zero (that is, the menu
is empty).
A menu can be empty when all the options in it are hidden by unmet
'depends on'.
For example,
menu "This menu will be empty"
config FOO
bool "foo"
depends on BROKEN
endmenu
If you visit this menu and press a '/' key and then another key, nconf
crashes with:
Floating point exception (core dumped)
When the number of items is zero, it does not make sense to search in
the menu. In this case, current_item() returns NULL, and item_index()
ERR, but get_mext_match() does not check it.
Let's make get_mext_match() just return if the menu is empty.
While I am here, change items_num from 'int' to 'unsigned int' because
it should never become negative.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|