summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-04-15iommu/vt-d: Force to flush iotlb before creating superpageLongpeng(Mike)1-14/+38
The translation caches may preserve obsolete data when the mapping size is changed, suppose the following sequence which can reveal the problem with high probability. 1.mmap(4GB,MAP_HUGETLB) 2. while (1) { (a) DMA MAP 0,0xa0000 (b) DMA UNMAP 0,0xa0000 (c) DMA MAP 0,0xc0000000 * DMA read IOVA 0 may failure here (Not present) * if the problem occurs. (d) DMA UNMAP 0,0xc0000000 } The page table(only focus on IOVA 0) after (a) is: PML4: 0x19db5c1003 entry:0xffff899bdcd2f000 PDPE: 0x1a1cacb003 entry:0xffff89b35b5c1000 PDE: 0x1a30a72003 entry:0xffff89b39cacb000 PTE: 0x21d200803 entry:0xffff89b3b0a72000 The page table after (b) is: PML4: 0x19db5c1003 entry:0xffff899bdcd2f000 PDPE: 0x1a1cacb003 entry:0xffff89b35b5c1000 PDE: 0x1a30a72003 entry:0xffff89b39cacb000 PTE: 0x0 entry:0xffff89b3b0a72000 The page table after (c) is: PML4: 0x19db5c1003 entry:0xffff899bdcd2f000 PDPE: 0x1a1cacb003 entry:0xffff89b35b5c1000 PDE: 0x21d200883 entry:0xffff89b39cacb000 (*) Because the PDE entry after (b) is present, it won't be flushed even if the iommu driver flush cache when unmap, so the obsolete data may be preserved in cache, which would cause the wrong translation at end. However, we can see the PDE entry is finally switch to 2M-superpage mapping, but it does not transform to 0x21d200883 directly: 1. PDE: 0x1a30a72003 2. __domain_mapping dma_pte_free_pagetable Set the PDE entry to ZERO Set the PDE entry to 0x21d200883 So we must flush the cache after the entry switch to ZERO to avoid the obsolete info be preserved. Cc: David Woodhouse <dwmw2@infradead.org> Cc: Lu Baolu <baolu.lu@linux.intel.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Kevin Tian <kevin.tian@intel.com> Cc: Gonglei (Arei) <arei.gonglei@huawei.com> Fixes: 6491d4d02893 ("intel-iommu: Free old page tables before creating superpage") Cc: <stable@vger.kernel.org> # v3.0+ Link: https://lore.kernel.org/linux-iommu/670baaf8-4ff8-4e84-4be3-030b95ab5a5e@huawei.com/ Suggested-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20210415004628.1779-1-longpeng2@huawei.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-15nfsd: removed unused argument in nfsd_startup_generic()Vasily Averin1-4/+4
Since commit 501cb1849f86 ("nfsd: rip out the raparms cache") nrservs is not used in nfsd_startup_generic() Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2021-04-15nfsd: remove unused functionJiapeng Chong1-9/+0
Fix the following clang warning: fs/nfsd/nfs4state.c:6276:1: warning: unused function 'end_offset' [-Wunused-function]. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2021-04-15iommu/amd: Put newline after closing bracket in warningPaul Menzel1-1/+1
Currently, on the Dell OptiPlex 5055 the EFR mismatch warning looks like below. [ 1.479774] smpboot: CPU0: AMD Ryzen 5 PRO 1500 Quad-Core Processor (family: 0x17, model: 0x1, stepping: 0x1) […] [ 2.507370] AMD-Vi: [Firmware Warn]: EFR mismatch. Use IVHD EFR (0xf77ef22294ada : 0x400f77ef22294ada ). Add the newline after the `).`, so it’s on one line. Fixes: a44092e326d4 ("iommu/amd: Use IVHD EFR for early initialization of IOMMU features") Cc: iommu@lists.linux-foundation.org Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Robert Richter <rrichter@amd.com> Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Link: https://lore.kernel.org/r/20210412180141.29605-1-pmenzel@molgen.mpg.de Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-15iommu/vt-d: Fix an error handling path in 'intel_prepare_irq_remapping()'Christophe JAILLET1-1/+1
If 'intel_cap_audit()' fails, we should return directly, as already done in the surrounding error handling path. Fixes: ad3d19029979 ("iommu/vt-d: Audit IOMMU Capabilities and add helper functions") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/98d531caabe66012b4fffc7813fd4b9470afd517.1618124777.git.christophe.jaillet@wanadoo.fr Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-15iommu/vt-d: Fix build error of pasid_enable_wpe() with !X86Lu Baolu1-0/+2
Commit f68c7f539b6e9 ("iommu/vt-d: Enable write protect for supervisor SVM") added pasid_enable_wpe() which hit below compile error with !X86. ../drivers/iommu/intel/pasid.c: In function 'pasid_enable_wpe': ../drivers/iommu/intel/pasid.c:554:22: error: implicit declaration of function 'read_cr0' [-Werror=implicit-function-declaration] 554 | unsigned long cr0 = read_cr0(); | ^~~~~~~~ In file included from ../include/linux/build_bug.h:5, from ../include/linux/bits.h:22, from ../include/linux/bitops.h:6, from ../drivers/iommu/intel/pasid.c:12: ../drivers/iommu/intel/pasid.c:557:23: error: 'X86_CR0_WP' undeclared (first use in this function) 557 | if (unlikely(!(cr0 & X86_CR0_WP))) { | ^~~~~~~~~~ ../include/linux/compiler.h:78:42: note: in definition of macro 'unlikely' 78 | # define unlikely(x) __builtin_expect(!!(x), 0) | ^ ../drivers/iommu/intel/pasid.c:557:23: note: each undeclared identifier is reported only once for each function it appears in 557 | if (unlikely(!(cr0 & X86_CR0_WP))) { | ^~~~~~~~~~ ../include/linux/compiler.h:78:42: note: in definition of macro 'unlikely' 78 | # define unlikely(x) __builtin_expect(!!(x), 0) | Add the missing dependency. Cc: Sanjay Kumar <sanjay.k.kumar@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Randy Dunlap <rdunlap@infradead.org> Fixes: f68c7f539b6e9 ("iommu/vt-d: Enable write protect for supervisor SVM") Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Link: https://lore.kernel.org/r/20210411062312.3057579-1-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-15iommu/amd: Remove performance counter pre-initialization testSuravee Suthikulpanit1-23/+1
In early AMD desktop/mobile platforms (during 2013), when the IOMMU Performance Counter (PMC) support was first introduced in commit 30861ddc9cca ("perf/x86/amd: Add IOMMU Performance Counter resource management"), there was a HW bug where the counters could not be accessed. The result was reading of the counter always return zero. At the time, the suggested workaround was to add a test logic prior to initializing the PMC feature to check if the counters can be programmed and read back the same value. This has been working fine until the more recent desktop/mobile platforms start enabling power gating for the PMC, which prevents access to the counters. This results in the PMC support being disabled unnecesarily. Unfortunatly, there is no documentation of since which generation of hardware the original PMC HW bug was fixed. Although, it was fixed soon after the first introduction of the PMC. Base on this, we assume that the buggy platforms are less likely to be in used, and it should be relatively safe to remove this legacy logic. Link: https://lore.kernel.org/linux-iommu/alpine.LNX.3.20.13.2006030935570.3181@monopod.intra.ispras.ru/ Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201753 Cc: Tj (Elloe Linux) <ml.linux@elloe.vision> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Alexander Monakov <amonakov@ispras.ru> Cc: David Coe <david.coe@live.co.uk> Cc: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20210409085848.3908-3-suravee.suthikulpanit@amd.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-15Revert "iommu/amd: Fix performance counter initialization"Paul Menzel1-34/+11
This reverts commit 6778ff5b21bd8e78c8bd547fd66437cf2657fd9b. The original commit tries to address an issue, where PMC power-gating causing the IOMMU PMC pre-init test to fail on certain desktop/mobile platforms where the power-gating is normally enabled. There have been several reports that the workaround still does not guarantee to work, and can add up to 100 ms (on the worst case) to the boot process on certain platforms such as the MSI B350M MORTAR with AMD Ryzen 3 2200G. Therefore, revert this commit as a prelude to removing the pre-init test. Link: https://lore.kernel.org/linux-iommu/alpine.LNX.3.20.13.2006030935570.3181@monopod.intra.ispras.ru/ Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201753 Cc: Tj (Elloe Linux) <ml.linux@elloe.vision> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Alexander Monakov <amonakov@ispras.ru> Cc: David Coe <david.coe@live.co.uk> Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Link: https://lore.kernel.org/r/20210409085848.3908-2-suravee.suthikulpanit@amd.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-15iommu/amd: Remove duplicate check of devidShaokun Zhang1-8/+1
'devid' has been checked in function check_device, no need to double check and clean up this. Cc: Joerg Roedel <joro@8bytes.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Link: https://lore.kernel.org/r/1617939040-35579-1-git-send-email-zhangshaokun@hisilicon.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-15iommu/exynos: Remove unneeded local variable initializationKrzysztof Kozlowski1-1/+1
The initialization of 'fault_addr' local variable is not needed as it is shortly after overwritten. Addresses-Coverity: Unused value Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20210408201622.78009-1-krzysztof.kozlowski@canonical.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-15KVM: s390: fix guarded storage control register handlingHeiko Carstens1-2/+2
store_regs_fmt2() has an ordering problem: first the guarded storage facility is enabled on the local cpu, then preemption disabled, and then the STGSC (store guarded storage controls) instruction is executed. If the process gets scheduled away between enabling the guarded storage facility and before preemption is disabled, this might lead to a special operation exception and therefore kernel crash as soon as the process is scheduled back and the STGSC instruction is executed. Fixes: 4e0b1ab72b8a ("KVM: s390: gs support for kvm guests") Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Cc: <stable@vger.kernel.org> # 4.12 Link: https://lore.kernel.org/r/20210415080127.1061275-1-hca@linux.ibm.com Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2021-04-15Merge tag 'drm-intel-fixes-2021-04-15' of ↵Daniel Vetter3-5/+4
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes Display panel & power related fixes: - Backlight fix (Lyude) - Display watermark fix (Ville) - VLV panel power fix (Hans) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YHg4nz/ndzDRmPjd@intel.com
2021-04-15Merge branch 'for-next/pac-set-get-enabled-keys' into for-next/coreCatalin Marinas16-83/+316
* for-next/pac-set-get-enabled-keys: : Introduce arm64 prctl(PR_PAC_{SET,GET}_ENABLED_KEYS). arm64: pac: Optimize kernel entry/exit key installation code paths arm64: Introduce prctl(PR_PAC_{SET,GET}_ENABLED_KEYS) arm64: mte: make the per-task SCTLR_EL1 field usable elsewhere
2021-04-15Merge branch 'for-next/mte-async-kernel-mode' into for-next/coreCatalin Marinas14-23/+329
* for-next/mte-async-kernel-mode: : Add MTE asynchronous kernel mode support kasan, arm64: tests supports for HW_TAGS async mode arm64: mte: Report async tag faults before suspend arm64: mte: Enable async tag check fault arm64: mte: Conditionally compile mte_enable_kernel_*() arm64: mte: Enable TCO in functions that can read beyond buffer limits kasan: Add report for async mode arm64: mte: Drop arch_enable_tagging() kasan: Add KASAN mode kernel parameter arm64: mte: Add asynchronous mode support
2021-04-15Merge branches 'for-next/misc', 'for-next/kselftest', 'for-next/xntable', ↵Catalin Marinas86-728/+3142
'for-next/vdso', 'for-next/fiq', 'for-next/epan', 'for-next/kasan-vmalloc', 'for-next/fgt-boot-init', 'for-next/vhe-only' and 'for-next/neon-softirqs-disabled', remote-tracking branch 'arm64/for-next/perf' into for-next/core * for-next/misc: : Miscellaneous patches arm64/sve: Add compile time checks for SVE hooks in generic functions arm64/kernel/probes: Use BUG_ON instead of if condition followed by BUG. arm64/sve: Remove redundant system_supports_sve() tests arm64: mte: Remove unused mte_assign_mem_tag_range() arm64: Add __init section marker to some functions arm64/sve: Rework SVE access trap to convert state in registers docs: arm64: Fix a grammar error arm64: smp: Add missing prototype for some smp.c functions arm64: setup: name `tcr` register arm64: setup: name `mair` register arm64: stacktrace: Move start_backtrace() out of the header arm64: barrier: Remove spec_bar() macro arm64: entry: remove test_irqs_unmasked macro ARM64: enable GENERIC_FIND_FIRST_BIT arm64: defconfig: Use DEBUG_INFO_REDUCED * for-next/kselftest: : Various kselftests for arm64 kselftest: arm64: Add BTI tests kselftest/arm64: mte: Report filename on failing temp file creation kselftest/arm64: mte: Fix clang warning kselftest/arm64: mte: Makefile: Fix clang compilation kselftest/arm64: mte: Output warning about failing compiler kselftest/arm64: mte: Use cross-compiler if specified kselftest/arm64: mte: Fix MTE feature detection kselftest/arm64: mte: common: Fix write() warnings kselftest/arm64: mte: user_mem: Fix write() warning kselftest/arm64: mte: ksm_options: Fix fscanf warning kselftest/arm64: mte: Fix pthread linking kselftest/arm64: mte: Fix compilation with native compiler * for-next/xntable: : Add hierarchical XN permissions for all page tables arm64: mm: use XN table mapping attributes for user/kernel mappings arm64: mm: use XN table mapping attributes for the linear region arm64: mm: add missing P4D definitions and use them consistently * for-next/vdso: : Minor improvements to the compat vdso and sigpage arm64: compat: Poison the compat sigpage arm64: vdso: Avoid ISB after reading from cntvct_el0 arm64: compat: Allow signal page to be remapped arm64: vdso: Remove redundant calls to flush_dcache_page() arm64: vdso: Use GFP_KERNEL for allocating compat vdso and signal pages * for-next/fiq: : Support arm64 FIQ controller registration arm64: irq: allow FIQs to be handled arm64: Always keep DAIF.[IF] in sync arm64: entry: factor irq triage logic into macros arm64: irq: rework root IRQ handler registration arm64: don't use GENERIC_IRQ_MULTI_HANDLER genirq: Allow architectures to override set_handle_irq() fallback * for-next/epan: : Support for Enhanced PAN (execute-only permissions) arm64: Support execute-only permissions with Enhanced PAN * for-next/kasan-vmalloc: : Support CONFIG_KASAN_VMALLOC on arm64 arm64: Kconfig: select KASAN_VMALLOC if KANSAN_GENERIC is enabled arm64: kaslr: support randomized module area with KASAN_VMALLOC arm64: Kconfig: support CONFIG_KASAN_VMALLOC arm64: kasan: abstract _text and _end to KERNEL_START/END arm64: kasan: don't populate vmalloc area for CONFIG_KASAN_VMALLOC * for-next/fgt-boot-init: : Booting clarifications and fine grained traps setup arm64: Require that system registers at all visible ELs be initialized arm64: Disable fine grained traps on boot arm64: Document requirements for fine grained traps at boot * for-next/vhe-only: : Dealing with VHE-only CPUs (a.k.a. M1) arm64: Get rid of CONFIG_ARM64_VHE arm64: Cope with CPUs stuck in VHE mode arm64: cpufeature: Allow early filtering of feature override * arm64/for-next/perf: arm64: perf: Remove redundant initialization in perf_event.c perf/arm_pmu_platform: Clean up with dev_printk perf/arm_pmu_platform: Fix error handling perf/arm_pmu_platform: Use dev_err_probe() for IRQ errors docs: perf: Address some html build warnings docs: perf: Add new description on HiSilicon uncore PMU v2 drivers/perf: hisi: Add support for HiSilicon PA PMU driver drivers/perf: hisi: Add support for HiSilicon SLLC PMU driver drivers/perf: hisi: Update DDRC PMU for programmable counter drivers/perf: hisi: Add new functions for HHA PMU drivers/perf: hisi: Add new functions for L3C PMU drivers/perf: hisi: Add PMU version for uncore PMU drivers. drivers/perf: hisi: Refactor code for more uncore PMUs drivers/perf: hisi: Remove unnecessary check of counter index drivers/perf: Simplify the SMMUv3 PMU event attributes drivers/perf: convert sysfs sprintf family to sysfs_emit drivers/perf: convert sysfs scnprintf family to sysfs_emit_at() and sysfs_emit() drivers/perf: convert sysfs snprintf family to sysfs_emit * for-next/neon-softirqs-disabled: : Run kernel mode SIMD with softirqs disabled arm64: fpsimd: run kernel mode NEON with softirqs disabled arm64: assembler: introduce wxN aliases for wN registers arm64: assembler: remove conditional NEON yield macros
2021-04-15arm64/sve: Add compile time checks for SVE hooks in generic functionsMark Brown1-2/+3
The FPSIMD code was relying on IS_ENABLED() checks in system_suppors_sve() to cause the compiler to delete references to SVE functions in some places, add explicit IS_ENABLED() checks back. Fixes: ef9c5d09797d ("arm64/sve: Remove redundant system_supports_sve() tests") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20210415121742.36628-1-broonie@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-04-15drm/i915/gvt: Fix error code in intel_gvt_init_device()Dan Carpenter1-4/+4
The intel_gvt_init_vgpu_type_groups() function is only called from intel_gvt_init_device(). If it fails then the intel_gvt_init_device() prints the error code and propagates it back again. That's a bug because false is zero/success. The fix is to modify it to return zero or negative error codes and make everything consistent. Fixes: c5d71cb31723 ("drm/i915/gvt: Move vGPU type related code into gvt file") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/YHaFQtk/DIVYK1u5@mwanda Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2021-04-15drm/i915/gvt: remove useless functionJiapeng Chong1-6/+0
Fix the following clang warning: drivers/gpu/drm/i915/gvt/gtt.c:590:20: warning: unused function 'ppgtt_set_guest_root_entry' [-Wunused-function]. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1618294728-78952-1-git-send-email-jiapeng.chong@linux.alibaba.com Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2021-04-15mmc: sdhci-s3c: constify uses of driver/match dataKrzysztof Kozlowski1-5/+5
The driver data (struct sdhci_s3c_drv_data) stored in of_device_id table is allocated as const and used only in const-way. Skip unnecessary const-away casts and convert all users to work with pointer to const. This is both more logical and safer. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Sylwester Nawrocki <snawrocki@kernel.org> Link: https://lore.kernel.org/r/20210415084412.51125-3-krzysztof.kozlowski@canonical.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-04-15mmc: sdhci-s3c: correct kerneldoc of sdhci_s3c_drv_dataKrzysztof Kozlowski1-1/+1
Correct the name of sdhci_s3c_drv_data structure in kerneldoc: drivers/mmc/host/sdhci-s3c.c:143: warning: expecting prototype for struct sdhci_s3c_driver_data. Prototype was for struct sdhci_s3c_drv_data instead Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Sylwester Nawrocki <snawrocki@kernel.org> Link: https://lore.kernel.org/r/20210415084412.51125-2-krzysztof.kozlowski@canonical.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-04-15mmc: sdhci-s3c: simplify getting of_device_id match dataKrzysztof Kozlowski1-9/+3
Use of_device_get_match_data() to make the code slightly smaller and to remove the of_device_id table forward declaration. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Sylwester Nawrocki <snawrocki@kernel.org> Link: https://lore.kernel.org/r/20210415084412.51125-1-krzysztof.kozlowski@canonical.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-04-15mmc: tmio: always restore irq registerWolfram Sang2-7/+6
Currently, only SDHI on R-Car Gen2+ reinitializes the irq register during reset but it should be done on all instances. We can move it from the SDHI driver to the TMIO core, because we now have the 'sd_irq_mask_all' variable which carries the proper value to use. That also means we can remove the initialization from tmio_mmc_probe() because it calls tmio_mmc_reset(), too. We only move that tmio_mmc_reset() call there a little to ensure 'sd_irq_mask_all' is properly set. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20210413083137.11171-1-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-04-15mmc: sdhci-pci-gli: Enlarge ASPM L1 entry delay of GL975xBen Chuang1-0/+32
GL975x enters ASPM L1 state after a short idle in default. Enlarge the idle period to 7.9us for improving the R/W performance. Signed-off-by: Ben Chuang <benchuanggli@gmail.com> Link: https://lore.kernel.org/r/20210415032637.5219-1-benchuanggli@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-04-15platform/x86: intel_chtdc_ti_pwrbtn: Fix missing IRQF_ONESHOT as only ↵Guangqing Zhu1-1/+1
threaded handler Coccinelle noticed: drivers/platform/x86/intel_chtdc_ti_pwrbtn.c:59:7-32: ERROR: Threaded IRQ with no primary handler requested without IRQF_ONESHOT Signed-off-by: Guangqing Zhu <zhuguangqing83@gmail.com> Link: https://lore.kernel.org/r/20210415091435.10486-1-zhuguangqing83@gmail.com Tested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-04-15mmc: core: Let eMMC sanitize not retry in case of timeout/failureBean Huo1-2/+2
Not all commands need to be retried in case of a timeout/failure. This is the case for the eMMC sanitize command, for example, which is issued through the ioctl interface. More precisely, in case of timeout, retrying could make the user wait for a very long time as each retry loop could last for a couple of minutes. Therefore, let's not use retries for the eMMC sanitize command. Signed-off-by: Bean Huo <beanhuo@micron.com> Link: https://lore.kernel.org/r/20210414212236.346813-3-huobean@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-04-15mmc: core: Add a retries parameter to __mmc_switch functionBean Huo3-15/+16
Add command retries parameter to __mmc_switch(), let caller pass retries according to the caller's condition. Signed-off-by: Bean Huo <beanhuo@micron.com> Link: https://lore.kernel.org/r/20210414212236.346813-2-huobean@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-04-15drm/imx: Don't set allow_fb_modifiers explicitlyDaniel Vetter2-2/+0
Since commit 890880ddfdbe256083170866e49c87618b706ac7 Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Date: Fri Jan 4 09:56:10 2019 +0100 drm: Auto-set allow_fb_modifiers when given modifiers at plane init this is done automatically as part of plane init, if drivers set the modifier list correctly. Which is the case here for both dcss and imx-drm drivers. Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://patchwork.freedesktop.org/patch/msgid/20210413094904.3736372-5-daniel.vetter@ffwll.ch
2021-04-15drm/vc4: Don't set allow_fb_modifiers explicitlyDaniel Vetter1-1/+0
Since commit 890880ddfdbe256083170866e49c87618b706ac7 Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Date: Fri Jan 4 09:56:10 2019 +0100 drm: Auto-set allow_fb_modifiers when given modifiers at plane init this is done automatically as part of plane init, if drivers set the modifier list correctly. Which is the case here. Acked-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Eric Anholt <eric@anholt.net> Cc: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210413094904.3736372-11-daniel.vetter@ffwll.ch
2021-04-15drm/tegra: Don't set allow_fb_modifiers explicitlyDaniel Vetter2-4/+8
Since commit 890880ddfdbe256083170866e49c87618b706ac7 Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Date: Fri Jan 4 09:56:10 2019 +0100 drm: Auto-set allow_fb_modifiers when given modifiers at plane init this is done automatically as part of plane init, if drivers set the modifier list correctly. Which is the case here. It was slightly inconsistently though, since planes with only linear modifier support haven't listed that explicitly. Fix that, and cc: stable to allow userspace to rely on this. Again don't backport further than where Paul's patch got added. Cc: stable@vger.kernel.org # v5.1 + Cc: Pekka Paalanen <pekka.paalanen@collabora.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: linux-tegra@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20210413094904.3736372-10-daniel.vetter@ffwll.ch
2021-04-15media: coda: fix macroblocks count control usageMarco Felsch1-1/+3
Commit b2d3bef1aa78 ("media: coda: Add a V4L2 user for control error macroblocks count") add the control for the decoder devices. But during streamon() this ioctl gets called for all (encoder and decoder) devices and on encoder devices this causes a null pointer exception. Fix this by setting the control only if it is really accessible. Fixes: b2d3bef1aa78 ("media: coda: Add a V4L2 user for control error macroblocks count") Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Cc: <stable@vger.kernel.org> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-15media: rkisp1: params: fix wrong bits settingsDafna Hirschfeld1-1/+0
The histogram mode is set using 'rkisp1_params_set_bits'. Only the bits of the mode should be the value argument for that function. Otherwise bits outside the mode mask are turned on which is not what was intended. Fixes: bae1155cf579 ("media: staging: rkisp1: add output device for parameters") Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-15dt-bindings: thermal: qcom-tsens: Add compatible for sm8350Robert Foss1-0/+1
Add tsens bindings for sm8350. Signed-off-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210324124308.1265626-1-robert.foss@linaro.org
2021-04-15thermal/drivers/tsens: Fix missing put_device errorGuangqing Zhu1-2/+4
Fixes coccicheck error: drivers/thermal/qcom/tsens.c:759:4-10: ERROR: missing put_device; call of_find_device_by_node on line 715, but without a corresponding object release within this function. Fixes: a7ff82976122 ("drivers: thermal: tsens: Merge tsens-common.c into tsens.c") Signed-off-by: Guangqing Zhu <zhuguangqing83@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210404125431.12208-1-zhuguangqing83@gmail.com
2021-04-15MAINTAINERS: update thermal CPU cooling sectionLukasz Luba1-1/+1
Update maintainers responsible for CPU cooling on Arm side. Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Javi Merino <javi.merino@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210217115908.22547-1-lukasz.luba@arm.com
2021-04-15thermal/drivers/qcom-spmi-temp-alarm: Add support for GEN2 rev 1 PMIC ↵David Collins1-30/+61
peripherals Add support for TEMP_ALARM GEN2 PMIC peripherals with digital major revision 1. This revision utilizes a different temperature threshold mapping than earlier revisions. Signed-off-by: David Collins <collinsd@codeaurora.org> Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/69c90a004b3f5b7ae282f5ec5ca2920a48f23e02.1596040416.git.gurus@codeaurora.org
2021-04-15thermal/drivers/cpufreq_cooling: Fix slab OOB issuebrian-sy yang1-1/+1
Slab OOB issue is scanned by KASAN in cpu_power_to_freq(). If power is limited below the power of OPP0 in EM table, it will cause slab out-of-bound issue with negative array index. Return the lowest frequency if limited power cannot found a suitable OPP in EM table to fix this issue. Backtrace: [<ffffffd02d2a37f0>] die+0x104/0x5ac [<ffffffd02d2a5630>] bug_handler+0x64/0xd0 [<ffffffd02d288ce4>] brk_handler+0x160/0x258 [<ffffffd02d281e5c>] do_debug_exception+0x248/0x3f0 [<ffffffd02d284488>] el1_dbg+0x14/0xbc [<ffffffd02d75d1d4>] __kasan_report+0x1dc/0x1e0 [<ffffffd02d75c2e0>] kasan_report+0x10/0x20 [<ffffffd02d75def8>] __asan_report_load8_noabort+0x18/0x28 [<ffffffd02e6fce5c>] cpufreq_power2state+0x180/0x43c [<ffffffd02e6ead80>] power_actor_set_power+0x114/0x1d4 [<ffffffd02e6fac24>] allocate_power+0xaec/0xde0 [<ffffffd02e6f9f80>] power_allocator_throttle+0x3ec/0x5a4 [<ffffffd02e6ea888>] handle_thermal_trip+0x160/0x294 [<ffffffd02e6edd08>] thermal_zone_device_check+0xe4/0x154 [<ffffffd02d351cb4>] process_one_work+0x5e4/0xe28 [<ffffffd02d352f44>] worker_thread+0xa4c/0xfac [<ffffffd02d360124>] kthread+0x33c/0x358 [<ffffffd02d289940>] ret_from_fork+0xc/0x18 Fixes: 371a3bc79c11b ("thermal/drivers/cpufreq_cooling: Fix wrong frequency converted from power") Signed-off-by: brian-sy yang <brian-sy.yang@mediatek.com> Signed-off-by: Michael Kao <michael.kao@mediatek.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Cc: stable@vger.kernel.org #v5.7 Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201229050831.19493-1-michael.kao@mediatek.com
2021-04-15thermal/drivers/hisi: Use the correct HiSilicon copyrightHao Fang1-3/+3
s/Hisilicon/HiSilicon/g. It should use capital S, according to https://www.hisilicon.com/en/terms-of-use. Signed-off-by: Hao Fang <fanghao11@huawei.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1617086733-2705-1-git-send-email-fanghao11@huawei.com
2021-04-15dt-bindings: tsens: qcom: Document MDM9607 compatibleKonrad Dybcio1-0/+2
Add the compatible for MDM9607. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210319220802.198215-1-konrad.dybcio@somainline.org
2021-04-15thermal/drivers/cpuidle_cooling: Fix use after errorDaniel Lezcano1-3/+5
When the function successfully finishes it logs an information about the registration of the cooling device and use its name to build the message. Unfortunately it was freed right before: drivers/thermal/cpuidle_cooling.c:218 __cpuidle_cooling_register() warn: 'name' was already freed. Fix this by freeing after the message happened. Fixes: 6fd1b186d900 ("thermal/drivers/cpuidle_cooling: Use device name instead of auto-numbering") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lore.kernel.org/r/20210319202522.891061-1-daniel.lezcano@linaro.org
2021-04-15thermal/drivers/devfreq_cooling: Fix wrong return on error pathDaniel Lezcano1-1/+1
The following error is reported by kbuild: smatch warnings: drivers/thermal/devfreq_cooling.c:433 of_devfreq_cooling_register_power() warn: passing zero to 'ERR_PTR' Fix the error code by the setting the 'err' variable instead of 'cdev'. Fixes: f8d354e821b2 ("thermal/drivers/devfreq_cooling: Use device name instead of auto-numbering") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210319202424.890968-1-daniel.lezcano@linaro.org
2021-04-15thermal/core: Fix memory leak in the error pathDaniel Lezcano1-0/+1
Fix the following error: smatch warnings: drivers/thermal/thermal_core.c:1020 __thermal_cooling_device_register() warn: possible memory leak of 'cdev' by freeing the cdev when exiting the function in the error path. Fixes: 584837618100 ("thermal/drivers/core: Use a char pointer for the cooling device name") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210319202257.890848-1-daniel.lezcano@linaro.org
2021-04-15media: cedrus: Fix H265 status definitionsJernej Skrabec1-8/+9
Some of the H265 status flags are wrong. Redefine them to corespond to Allwinner CedarC open source userspace library. Only one of these flags is actually used and new value also matches value used in libvdpau-sunxi library, which is proven to be working. Note that wrong (old) value in right circumstances (in combination with another H265 decoding bug) causes driver lock up. With this fix decoding is still broken (green output) but at least driver doesn't lock up. Fixes: 86caab29da78 ("media: cedrus: Add HEVC/H.265 decoding support") Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-15media: meson-ge2d: fix rotation parametersNeil Armstrong1-2/+2
With these settings, 90deg and 270deg rotation leads to inverted vertical, fix them to have correct rotation. Fixes: 59a635327ca7 ("media: meson: Add M2M driver for the Amlogic GE2D Accelerator Unit") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-15media: v4l2-ctrls: fix reference to freed memoryHans Verkuil2-79/+70
When controls are used together with the Request API, then for each request a v4l2_ctrl_handler struct is allocated. This contains the controls that can be set in a request. If a control is *not* set in the request, then the value used in the most recent previous request must be used, or the current value if it is not found in any outstanding requests. The framework tried to find such a previous request and it would set the 'req' pointer in struct v4l2_ctrl_ref to the v4l2_ctrl_ref of the control in such a previous request. So far, so good. However, when that previous request was applied to the hardware, returned to userspace, and then userspace would re-init or free that request, any 'ref' pointer in still-queued requests would suddenly point to freed memory. This was not noticed before since the drivers that use this expected that each request would always have the controls set, so there was never any need to find a control in older requests. This requirement was relaxed, and now this bug surfaced. It was also made worse by changeset 2fae4d6aabc8 ("media: v4l2-ctrls: v4l2_ctrl_request_complete() should always set ref->req") which increased the chance of this happening. The use of the 'req' pointer in v4l2_ctrl_ref was very fragile, so drop this entirely. Instead add a valid_p_req bool to indicate that p_req contains a valid value for this control. And if it is false, then just use the current value of the control. Note that VIDIOC_G_EXT_CTRLS will always return -EACCES when attempting to get a control from a request until the request is completed. And in that case, all controls in the request will have the control value set (i.e. valid_p_req is true). This means that the whole 'find the most recent previous request containing a control' idea is pointless, and the code can be simplified considerably. The v4l2_g_ext_ctrls_common() function was refactored a bit to make it more understandable. It also avoids updating volatile controls in a completed request since that was already done when the request was completed. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Fixes: 2fae4d6aabc8 ("media: v4l2-ctrls: v4l2_ctrl_request_complete() should always set ref->req") Fixes: 6fa6f831f095 ("media: v4l2-ctrls: add core request support") Cc: <stable@vger.kernel.org> # for v5.9 and up Tested-by: Alexandre Courbot <acourbot@chromium.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-15media: venus : hfi: add venus image info into smemDikshita Agarwal2-3/+19
Fill fw version info into smem to be printed as part of soc info. Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-15media: venus: Fix internal buffer size calculations for v6.Dikshita Agarwal1-8/+18
- Update persist buffer size for encoder to 204800. - Update persist buffer size calculation for h264 decoder. - h264d level 6 support needs update in internal buffer size. update below buffers size - h264 decoder colocated motion vector buffer. - h264 decoder VPP command buffer. - h265 decoder VPP command buffer. - Update VP9_NUM_FRAME_INFO_BUF to 32. Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-15media: venus: helpers: keep max bandwidth when mbps exceeds the supported rangeVikash Garodia1-1/+1
When the video usecase have macro blocks per sec which is more than supported, keep the required bus bandwidth as the maximum supported. Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-15media: venus: fix hw overload error log conditionMansur Alisha Shaik1-1/+1
In current video driver, frequency is calculated for all the running video instances and check aganist maximum supported frequency. If both calculated frequency and maximum supported frequency are same, even then HW overload error is printed. Fix this by printing error log only when frequency is greater than maximum supported frequency. Signed-off-by: Mansur Alisha Shaik <mansur@codeaurora.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-15media: venus: core: correct firmware name for sm8250Dmitry Baryshkov1-1/+1
Firmware name for venus should be qcom/vpu-1.0/venus.mdt, not qcom/sm8250/venus.mdt. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-15media: venus: core,pm: fix potential infinite loopColin Ian King1-2/+2
The for-loop iterates with a u8 loop counter i and compares this with the loop upper limit of res->resets_num which is an unsigned int type. There is a potential infinite loop if res->resets_num is larger than the u8 loop counter i. Fix this by making the loop counter the same type as res->resets_num. Addresses-Coverity: ("Infinite loop") Fixes: 3bca43585e22 ("media: venus: core,pm: Add handling for resets") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>