summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-04-20hwmon: (pmbus) Add pmbus_set_update() function to set update flagErik Rosen2-0/+12
For the STPDDC60 chip, the vout alarm-limits are represented as an offset relative to the commanded output voltage. This means that the limits are dynamic and must not be cached by the pmbus driver. This patch adds a pmbus_set_sensor() function to pmbus_core to be able to set the update flag on selected sensors after auto-detection of limit attributes. Signed-off-by: Erik Rosen <erik.rosen@metormote.com> Link: https://lore.kernel.org/r/20210218115249.28513-2-erik.rosen@metormote.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: (nct6683) Support NCT6686DJiqi Li1-2/+9
Add support for NCT6686D chip used in the Lenovo P620. Signed-off-by: Jiqi Li <lijq9@lenovo.com> Reviewed-by: Mark Pearson <markpearson@lenovo.com> Link: https://lore.kernel.org/r/20210304104421.1912934-1-lijq9@lenovo.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: (pmbus) Add driver for Infineon IR36021Chris Packham5-0/+153
The IR36021 is a dual‐loop digital multi‐phase buck controller. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Link: https://lore.kernel.org/r/20210301035954.16713-3-chris.packham@alliedtelesis.co.nz Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20dt-bindings: trivial-devices: Add infineon,ir36021Chris Packham1-0/+2
Add infineon,ir36021 to trivial-devices.yaml. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210301035954.16713-2-chris.packham@alliedtelesis.co.nz Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: (corsair-psu) Update calculation of LINEAR11 valuesWilken Gottwalt1-22/+8
Changes the way how LINEAR11 values are calculated. The new method increases the precision of 2-3 digits. old method: corsairpsu-hid-3-1 Adapter: HID adapter v_in: 230.00 V v_out +12v: 12.00 V v_out +5v: 5.00 V v_out +3.3v: 3.00 V psu fan: 0 RPM vrm temp: +44.0°C case temp: +37.0°C power total: 152.00 W power +12v: 112.00 W power +5v: 38.00 W power +3.3v: 5.00 W curr in: N/A curr +12v: 9.00 A curr +5v: 7.00 A curr +3.3v: 1000.00 mA new method: corsairpsu-hid-3-1 Adapter: HID adapter v_in: 230.00 V v_out +12v: 12.16 V v_out +5v: 5.01 V v_out +3.3v: 3.30 V psu fan: 0 RPM vrm temp: +44.5°C case temp: +37.8°C power total: 148.00 W power +12v: 108.00 W power +5v: 37.00 W power +3.3v: 4.50 W curr in: N/A curr +12v: 9.25 A curr +5v: 7.50 A curr +3.3v: 1.50 A Co-developed-by: Jack Doan <me@jackdoan.com> Signed-off-by: Jack Doan <me@jackdoan.com> Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net> Link: https://lore.kernel.org/r/YDoSMqFbgoTXyoru@monster.powergraphx.local Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: Switch to using the new API kobj_to_dev()Yang Li1-1/+1
fixed the following coccicheck: ./drivers/hwmon/hwmon.c:82:60-61: WARNING opportunity for kobj_to_dev() Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/1614071667-5665-1-git-send-email-yang.lee@linux.alibaba.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: (adm9240) Convert to devm_hwmon_device_register_with_info APIGuenter Roeck1-495/+445
Also use regmap for register caching. This change reduces code and data size by more than 40%. While at it, fixed some warnings reported by checkpatch. Cc: Chris Packham <Chris.Packham@alliedtelesis.co.nz> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: (adm9240) Store i2c device instead of client in local dataGuenter Roeck1-15/+14
We only use the pointer to i2c_client to access &client->dev. Store the device pointer directly instead of retrieving it from i2c_client. Cc: Chris Packham <Chris.Packham@alliedtelesis.co.nz> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: (adm9240) Drop log messages from detect functionGuenter Roeck1-12/+5
Not detecting a chip in the detect function is normal and should not generate any log messages, much less error messages. Cc: Chris Packham <Chris.Packham@alliedtelesis.co.nz> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20Merge tag 'gvt-fixes-2021-04-20' of https://github.com/intel/gvt-linux into ↵Rodrigo Vivi1-6/+13
drm-intel-fixes gvt-fixes-2021-04-20 - Fix cmd parser regression on BDW (Zhenyu) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> From: Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210420023312.GL1551@zhen-hp.sh.intel.com
2021-04-20PCI: Refactor HT advertising of NO_MSI flagMarc Zyngier1-11/+4
The few quirks that deal with NO_MSI tend to be copy-paste heavy. Refactor them so that the hierarchy of conditions is slightly cleaner. Link: https://lore.kernel.org/r/20210330151145.997953-15-maz@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2021-04-20PCI/MSI: Document the various ways of ending up with NO_MSIMarc Zyngier1-2/+9
We have now three ways of ending up with NO_MSI being set. Document them. Link: https://lore.kernel.org/r/20210330151145.997953-14-maz@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2021-04-20PCI: mediatek: Advertise lack of built-in MSI handlingThomas Gleixner1-0/+4
Some Mediatek host bridges cannot handle MSIs, which is sad. This also results in an ugly warning at device probe time, as the core PCI code wasn't told that MSIs were not available. Advertise this fact to the rest of the core PCI code by using the 'msi_domain' attribute, which still opens the possibility for another block to provide the MSI functionnality. [maz: commit message, switched over to msi_domain attribute] Link: https://lore.kernel.org/r/20210330151145.997953-13-maz@kernel.org Reported-by: Frank Wunderlich <frank-w@public-files.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2021-04-20PCI/MSI: Make pci_host_common_probe() declare its reliance on MSI domainsMarc Zyngier1-0/+1
The generic PCI host driver relies on MSI domains for MSIs to be provided to its end-points. Make this dependency explicit. This cures the warnings occuring on arm/arm64 VMs when booted with PCI virtio devices and no MSI controller (no GICv3 ITS, for example). It is likely that other drivers will need to express the same dependency. Link: https://lore.kernel.org/r/20210330151145.997953-12-maz@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2021-04-20PCI/MSI: Let PCI host bridges declare their reliance on MSI domainsMarc Zyngier2-0/+3
There is a whole class of host bridges that cannot know whether MSIs will be provided or not, as they rely on other blocks to provide the MSI functionnality, using MSI domains. This is the case for example on systems that use the ARM GIC architecture. Introduce a new attribute ('msi_domain') indicating that implicit dependency, and use this property to set the NO_MSI flag when no MSI domain is found at probe time. Link: https://lore.kernel.org/r/20210330151145.997953-11-maz@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2021-04-20PCI/MSI: Kill default_teardown_msi_irqs()Marc Zyngier2-11/+1
It doesn't have any caller left. Link: https://lore.kernel.org/r/20210330151145.997953-10-maz@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2021-04-20PCI/MSI: Kill msi_controller structureMarc Zyngier1-15/+1
msi_controller had a good, long life as the abstraction for a driver providing MSIs to PCI devices. But it has been replaced in all drivers by the more expressive generic MSI framework. Farewell, struct msi_controller. Link: https://lore.kernel.org/r/20210330151145.997953-9-maz@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2021-04-20PCI/MSI: Drop use of msi_controller from core codeMarc Zyngier3-26/+1
As there is no driver using msi_controller, we can now safely remove its use from the PCI probe code. Link: https://lore.kernel.org/r/20210330151145.997953-8-maz@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2021-04-20PCI: hv: Drop msi_controller structureMarc Zyngier1-4/+0
The Hyper-V PCI driver still makes use of a msi_controller structure, but it looks more like a distant leftover than anything actually useful, since it is initialised to 0 and never used for anything. Just remove it. Link: https://lore.kernel.org/r/20210330151145.997953-7-maz@kernel.org Tested-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2021-04-20PCI: xilinx: Convert to MSI domainsMarc Zyngier2-138/+106
In anticipation of the removal of the msi_controller structure, convert the ancient xilinx host controller driver to MSI domains. We end-up with the usual two domain structure, the top one being a generic PCI/MSI domain, the bottom one being xilinx-specific and handling the actual HW interrupt allocation. This allows us to fix some of the most appaling MSI programming, where the message programmed in the device is the virtual IRQ number instead of the allocated vector number. The allocator is also made safe with a mutex. This should allow support for MultiMSI, but I decided not to even try, since I cannot test it. Link: https://lore.kernel.org/r/20210330151145.997953-6-maz@kernel.org Tested-by: Bharat Kumar Gogada <bharatku@xilinx.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2021-04-20PCI: xilinx: Don't allocate extra memory for the MSI capture addressMarc Zyngier1-12/+6
A long cargo-culted behaviour of PCI drivers is to allocate memory to obtain an address that is fed to the controller as the MSI capture address (i.e. the MSI doorbell). But there is no actual requirement for this address to be RAM. All it needs to be is a suitable aligned address that will *not* be DMA'd to. Use the physical address of the 'port' data structure as the MSI capture address, aligned on a 4K boundary. Link: https://lore.kernel.org/r/20210330151145.997953-5-maz@kernel.org Tested-by: Bharat Kumar Gogada <bharatku@xilinx.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2021-04-20PCI: rcar: Convert to MSI domainsMarc Zyngier2-183/+169
In anticipation of the removal of the msi_controller structure, convert the Rcar host controller driver to MSI domains. We end-up with the usual two domain structure, the top one being a generic PCI/MSI domain, the bottom one being Rcar-specific and handling the actual HW interrupt allocation. Link: https://lore.kernel.org/r/20210330151145.997953-4-maz@kernel.org Tested-by: Marek Vasut <marek.vasut+renesas@gmail.com> Signed-off-by: Marc Zyngier <maz@kernel.org> [lorenzo.pieralisi@arm.com: merged fix https://lore.kernel.org/linux-pci/87y2e2p9wk.wl-maz@kernel.org] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2021-04-20PCI: rcar: Don't allocate extra memory for the MSI capture addressMarc Zyngier1-11/+7
A long cargo-culted behaviour of PCI drivers is to allocate memory to obtain an address that is fed to the controller as the MSI capture address (i.e. the MSI doorbell). But there is no actual requirement for this address to be RAM. All it needs to be is a suitable aligned address that will *not* be DMA'd to. Since the rcar platform already has a requirement that this address should be in the first 4GB of the physical address space, use the controller's own base address as the capture address. Link: https://lore.kernel.org/r/20210330151145.997953-3-maz@kernel.org Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
2021-04-20PCI: tegra: Convert to MSI domainsMarc Zyngier2-159/+191
In anticipation of the removal of the msi_controller structure, convert the Tegra host controller driver to MSI domains. We end-up with the usual two domain structure, the top one being a generic PCI/MSI domain, the bottom one being Tegra-specific and handling the actual HW interrupt allocation. While at it, convert the normal interrupt handler to a chained handler, handle the controller's MSI IRQ edge triggered, support multiple MSIs per device and use the AFI_MSI_EN_VEC* registers to provide MSI masking. [treding@nvidia.com: fix, clean up and address TODOs from Marc's draft] Link: https://lore.kernel.org/r/20210330151145.997953-2-maz@kernel.org Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2021-04-20s390/pci: expose a PCI device's UID as its indexNiklas Schnelle2-4/+42
On s390 each PCI device has a user-defined ID (UID) exposed under /sys/bus/pci/devices/<dev>/uid. This ID was designed to serve as the PCI device's primary index and to match the device within Linux to the device configured in the hypervisor. To serve as a primary identifier the UID must be unique within the Linux instance, this is guaranteed by the platform if and only if the UID Uniqueness Checking flag is set within the CLP List PCI Functions response. In this sense the UID serves an analogous function as the SMBIOS instance number or ACPI index exposed as the "index" respectively "acpi_index" device attributes and used by e.g. systemd to set interface names. As s390 does not use and will likely never use ACPI nor SMBIOS there is no conflict and we can just expose the UID under the "index" attribute whenever UID Uniqueness Checking is active and get systemd's interface naming support for free. Link: https://lore.kernel.org/lkml/20210412135905.1434249-1-schnelle@linux.ibm.com/ Acked-by: Viktor Mihajlovski <mihajlov@linux.ibm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Narendra K <narendra_k@dell.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-04-20spi: stm32-qspi: Fix compilation warning in ARM64Patrice Chotard1-1/+1
This fixes warnings detected when compiling in ARM64. Introduced by 'commit 18674dee3cd6 ("spi: stm32-qspi: Add dirmap support")' Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Link: https://lore.kernel.org/r/20210420082103.1693-1-patrice.chotard@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-20ASoC: simple-card-utils: Allocate link info structure on heapThierry Reding2-17/+24
struct link_info can grow fairly large and may cause the stack frame size to be exceeded when allocated on the stack. Some architectures such as 32-bit ARM, RISC-V or PowerPC have small stack frames where this causes a compiler warning, so allocate these structures on the heap instead of the stack. Fixes: 343e55e71877 ("ASoC: simple-card-utils: Increase maximum number of links to 128") Reported-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/20210419164117.1422242-1-thierry.reding@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-20ASoC: rt1015p: add support on format S32_LEJack Yu1-1/+2
Add support on format S32_LE for rt1015p. Signed-off-by: Jack Yu <jack.yu@realtek.com> Link: https://lore.kernel.org/r/377f0ee05d514c66b567eb6385ac7753@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-20RDMA/mlx5: Fix type assignment for ICM DMMaor Gottlieb1-10/+13
We should hold the UAPI DM type in the base struct and not the internal mlx5 type. Fixes: 251b9d788750 ("RDMA/mlx5: Re-organize the DM code") Link: https://lore.kernel.org/r/58dedbd5c132660f808e59166d434e2eaa6ecf7a.1618753425.git.leonro@nvidia.com Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-04-20IB/mlx5: Set right RoCE l3 type and roce version while deleting GIDParav Pandit2-6/+6
Currently when GID is deleted, it zero out all the fields of the RoCE address in the SET_ROCE_ADDRESS command for a specified index. roce_version = 0 means RoCEv1 in the SET_ROCE_ADDRESS command. This assumes that device has RoCEv1 always enabled which is not always correct. For example Subfunction does not support RoCEv1. Due to this assumption a previously added RoCEv2 GID is always deleted as RoCEv1 GID. This results in a below syndrome: mlx5_core.sf mlx5_core.sf.4: mlx5_cmd_check:777:(pid 4256): SET_ROCE_ADDRESS(0x761) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x12822d) Hence set the right RoCE version during GID deletion provided by the core. Link: https://lore.kernel.org/r/d3f54129c90ca329caf438dbe31875d8ad08d91a.1618753425.git.leonro@nvidia.com Signed-off-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-04-20ALSA: hda/realtek: Enable mute/micmute LEDs and limit mic boost on EliteBook ↵Kai-Heng Feng1-0/+8
845 G8 On HP EliteBook 845 G8, the audio LEDs can be enabled by ALC285_FIXUP_HP_MUTE_LED. So use it accordingly. In addition to that, the mic captures lots of noises, so also limits the mic boost. The quality of capture audio becomes crystal clear after limiting the mic boost. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20210420115530.1349353-1-kai.heng.feng@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-04-20RDMA/i40iw: Fix error unwinding when i40iw_hmc_sd_one failsSindhu Devale1-4/+2
When i40iw_hmc_sd_one fails, chunk is freed without the deletion of chunk entry in the PBLE info list. Fix it by adding the chunk entry to the PBLE info list only after successful addition of SD in i40iw_hmc_sd_one. This fixes a static checker warning reported here: https://lore.kernel.org/linux-rdma/YHV4CFXzqTm23AOZ@mwanda/ Fixes: 9715830157be ("i40iw: add pble resource files") Link: https://lore.kernel.org/r/20210416002104.323-1-shiraz.saleem@intel.com Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sindhu Devale <sindhu.devale@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-04-20RDMA/cxgb4: add missing qpid incrementPotnuri Bharat Teja1-1/+1
missing qpid increment leads to skipping few qpids while allocating QP. This eventually leads to adapter running out of qpids after establishing fewer connections than it actually supports. Current patch increments the qpid correctly. Fixes: cfdda9d76436 ("RDMA/cxgb4: Add driver for Chelsio T4 RNIC") Link: https://lore.kernel.org/r/20210415151422.9139-1-bharat@chelsio.com Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-04-20IB/ipoib: Remove unnecessary struct declarationWan Jiabing1-2/+0
struct ipoib_cm_tx is defined at 245th line. And the definition is independent on the MACRO. The declaration here is unnecessary. Remove it. Link: https://lore.kernel.org/r/20210415092124.27684-1-wanjiabing@vivo.com Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Reviewed-by: Christoph Lameter <cl@linux.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-04-20perf tools: Add a build-test variant to use in builds from a tarballArnaldo Carvalho de Melo2-3/+24
To use in automated tests inside containers from a tarball generated by 'make perf-tar-src-pkg*', where testing building from a tarball is obviously not needed, so add a 'build-test-tarball' for that case. And don't build with gtk2 as this complicates things for cross builds where we don't always have all the libraries a full perf build requires available for the target arch, ditto for static builds. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-20perf data: Fix error return code in perf_data__create_dir()Zhen Lei1-2/+3
Although 'ret' has been initialized to -1, but it will be reassigned by the "ret = open(...)" statement in the for loop. So that, the value of 'ret' is unknown when asprintf() failed. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210415083417.3740-1-thunder.leizhen@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-20perf arm64: Fix off-by-one directory paths.Ian Rogers3-6/+6
Relative path include works in the regular build due to -I paths but may break in other situations. Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Stephane Eranian <eranian@google.com> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lore.kernel.org/lkml/20210416214113.552252-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-20perf annotate: Add line number like in TUI and source location at EOLMartin Liška1-16/+14
The patch changes the output format in 2 ways: - line number is displayed for all source lines (matching TUI mode) - source locations for the hottest lines are printed at the line end in order to preserve layout Before: 0.00 : 405ef1: inc %r15 : tmpsd * (TD + tmpsd * TDD))); 0.01 : 405ef4: vfmadd213sd 0x2b9b3(%rip),%xmm0,%xmm3 # 4318b0 <_IO_stdin_used+0x8b0> : tmpsd * (TC + eff.c:1811 0.67 : 405efd: vfmadd213sd 0x2b9b2(%rip),%xmm0,%xmm3 # 4318b8 <_IO_stdin_used+0x8b8> : TA + tmpsd * (TB + 0.35 : 405f06: vfmadd213sd 0x2b9b1(%rip),%xmm0,%xmm3 # 4318c0 <_IO_stdin_used+0x8c0> : dumbo = eff.c:1809 1.41 : 405f0f: vfmadd213sd 0x2b9b0(%rip),%xmm0,%xmm3 # 4318c8 <_IO_stdin_used+0x8c8> : sumi -= sj * tmpsd * dij2i * dumbo; eff.c:1813 2.58 : 405f18: vmulsd %xmm3,%xmm0,%xmm0 2.81 : 405f1c: vfnmadd213sd 0x30(%rsp),%xmm1,%xmm0 3.78 : 405f23: vmovsd %xmm0,0x30(%rsp) : for (k = 0; k < lpears[i] + upears[i]; k++) { eff.c:1761 0.90 : 405f29: cmp %r15d,%r12d After: 0.00 : 405ef1: inc %r15 : 1812 tmpsd * (TD + tmpsd * TDD))); 0.01 : 405ef4: vfmadd213sd 0x2b9b3(%rip),%xmm0,%xmm3 # 4318b0 <_IO_stdin_used+0x8b0> : 1811 tmpsd * (TC + 0.67 : 405efd: vfmadd213sd 0x2b9b2(%rip),%xmm0,%xmm3 # 4318b8 <_IO_stdin_used+0x8b8> // eff.c:1811 : 1810 TA + tmpsd * (TB + 0.35 : 405f06: vfmadd213sd 0x2b9b1(%rip),%xmm0,%xmm3 # 4318c0 <_IO_stdin_used+0x8c0> : 1809 dumbo = 1.41 : 405f0f: vfmadd213sd 0x2b9b0(%rip),%xmm0,%xmm3 # 4318c8 <_IO_stdin_used+0x8c8> // eff.c:1809 : 1813 sumi -= sj * tmpsd * dij2i * dumbo; 2.58 : 405f18: vmulsd %xmm3,%xmm0,%xmm0 // eff.c:1813 2.81 : 405f1c: vfnmadd213sd 0x30(%rsp),%xmm1,%xmm0 3.78 : 405f23: vmovsd %xmm0,0x30(%rsp) : 1761 for (k = 0; k < lpears[i] + upears[i]; k++) { Where e.g. '// eff.c:1811' shares the same color as the percentantage at the line beginning. Signed-off-by: Martin Liška <mliska@suse.cz> Link: http://lore.kernel.org/lkml/a0d53f31-f633-5013-c386-a4452391b081@suse.cz Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-20perf: Update .gitignore fileAlexander Antonov1-0/+1
After a "make -C tools/perf", git reports the following untracked file: perf-iostat Add this generated file to perf's .gitignore file. Signed-off-by: Alexander Antonov <alexander.antonov@linux.intel.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey V Bayduraev <alexey.v.bayduraev@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20210419094147.15909-5-alexander.antonov@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-20perf stat: Enable iostat mode for x86 platformsAlexander Antonov6-1/+466
This functionality is based on recently introduced sysfs attributes for Intel® Xeon® Scalable processor family (code name Skylake-SP): Commit bb42b3d39781d7fc ("perf/x86/intel/uncore: Expose an Uncore unit to IIO PMON mapping") Mode is intended to provide four I/O performance metrics in MB per each PCIe root port: - Inbound Read: I/O devices below root port read from the host memory - Inbound Write: I/O devices below root port write to the host memory - Outbound Read: CPU reads from I/O devices below root port - Outbound Write: CPU writes to I/O devices below root port Each metric requiries only one uncore event which increments at every 4B transfer in corresponding direction. The formulas to compute metrics are generic: #EventCount * 4B / (1024 * 1024) Acked-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Alexander Antonov <alexander.antonov@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey V Bayduraev <alexey.v.bayduraev@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20210419094147.15909-4-alexander.antonov@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-20perf stat: Helper functions for PCIe root ports list in iostat modeAlexander Antonov1-0/+110
Introduce helper functions to control PCIe root ports list. These helpers will be used in the follow-up patch. Signed-off-by: Alexander Antonov <alexander.antonov@linux.intel.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey V Bayduraev <alexey.v.bayduraev@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20210419094147.15909-3-alexander.antonov@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-20perf stat: Basic support for iostat in perfAlexander Antonov7-12/+156
Add basic flow for a new iostat mode in perf. Mode is intended to provide four I/O performance metrics per each PCIe root port: Inbound Read, Inbound Write, Outbound Read, Outbound Write. The actual code to compute the metrics and attribute it to root port is in follow-on patches. Signed-off-by: Alexander Antonov <alexander.antonov@linux.intel.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey V Bayduraev <alexey.v.bayduraev@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20210419094147.15909-2-alexander.antonov@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-20perf vendor events: Initial JSON/events list for power10 platformKajol Jain11-0/+1296
Patch adds initial JSON/events for POWER10. Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Reviewed-by: Paul Clarke <pc@us.ibm.com> Tested-by: Paul Clarke <pc@us.ibm.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lore.kernel.org/lkml/20210419112001.71466-1-kjain@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-20dmaengine: idxd: remove detection of device typeDave Jiang6-75/+48
Move all static data type for per device type to an idxd_driver_data data structure. The data can be attached to the pci_device_id and provided by the pci probe function. This removes a lot of unnecessary type detection and setup code. Suggested-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/161852988924.2203940.2787590808682466398.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-04-20dmaengine: idxd: iax bus removalDave Jiang4-87/+13
There is no need to have an additional bus for the IAX device. The removal of IAX will change user ABI as /sys/bus/iax will no longer exist. The iax device will be moved to the dsa bus. The device id for dsa and iax will now be combined rather than unique for each device type in order to accommodate the iax devices. This is in preparation for fixing the sub-driver code for idxd. There's no hardware deployment for Sapphire Rapids platform yet, which means that users have no reason to have developed scripts against this ABI. There is some exposure to released versions of accel-config, but those are being fixed up and an accel-config upgrade is reasonable to get IAX support. As far as accel-config is concerned IAX support starts when these devices appear under /sys/bus/dsa, and old accel-config just assumes that an empty / missing /sys/bus/iax just means a lack of platform support. Fixes: f25b463883a8 ("dmaengine: idxd: add IAX configuration support in the IDXD driver") Suggested-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/161852988298.2203940.4529909758034944428.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-04-20dmaengine: idxd: fix cdev setup and free device lifetime issuesDave Jiang5-89/+63
The char device setup and cleanup has device lifetime issues regarding when parts are initialized and cleaned up. The initialization of struct device is done incorrectly. device_initialize() needs to be called on the 'struct device' and then additional changes can be added. The ->release() function needs to be setup via device_type before dev_set_name() to allow proper cleanup. The change re-parents the cdev under the wq->conf_dev to get natural reference inheritance. No known dependency on the old device path exists. Reported-by: Jason Gunthorpe <jgg@nvidia.com> Fixes: 42d279f9137a ("dmaengine: idxd: add char driver to expose submission portal to userland") Signed-off-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Link: https://lore.kernel.org/r/161852987721.2203940.1478218825576630810.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-04-20dmaengine: idxd: fix group conf_dev lifetimeDave Jiang4-59/+88
Remove devm_* allocation and fix group->conf_dev 'struct device' lifetime. Address issues flagged by CONFIG_DEBUG_KOBJECT_RELEASE. Add release functions in order to free the allocated memory at the group->conf_dev destruction time. Reported-by: Jason Gunthorpe <jgg@nvidia.com> Fixes: bfe1d56091c1 ("dmaengine: idxd: Init and probe for Intel data accelerators") Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/161852987144.2203940.8830315575880047.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-04-20dmaengine: idxd: fix engine conf_dev lifetimeDave Jiang4-51/+86
Remove devm_* allocation and fix engine->conf_dev 'struct device' lifetime. Address issues flagged by CONFIG_DEBUG_KOBJECT_RELEASE. Add release functions in order to free the allocated memory at the engine conf_dev destruction time. Reported-by: Jason Gunthorpe <jgg@nvidia.com> Fixes: bfe1d56091c1 ("dmaengine: idxd: Init and probe for Intel data accelerators") Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/161852986460.2203940.16603218225412118431.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-04-20dmaengine: idxd: fix wq conf_dev 'struct device' lifetimeDave Jiang5-91/+146
Remove devm_* allocation and fix wq->conf_dev 'struct device' lifetime. Address issues flagged by CONFIG_DEBUG_KOBJECT_RELEASE. Add release functions in order to free the allocated memory for the wq context at device destruction time. Reported-by: Jason Gunthorpe <jgg@nvidia.com> Fixes: bfe1d56091c1 ("dmaengine: idxd: Init and probe for Intel data accelerators") Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/161852985907.2203940.6840120734115043753.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-04-20dmaengine: idxd: fix idxd conf_dev 'struct device' lifetimeDave Jiang3-90/+94
The devm managed lifetime is incompatible with 'struct device' objects that resides in idxd context. This is one of the series that clean up the idxd driver 'struct device' lifetime. Fix idxd->conf_dev 'struct device' lifetime. Address issues flagged by CONFIG_DEBUG_KOBJECT_RELEASE. Add release functions in order to free the allocated memory at the appropriate time. Reported-by: Jason Gunthorpe <jgg@nvidia.com> Fixes: bfe1d56091c1 ("dmaengine: idxd: Init and probe for Intel data accelerators") Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/161852985319.2203940.4650791514462735368.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>