summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-05-26mtd: rawnand: Avoid accessing NV-DDR timings from legacy codeMiquel Raynal1-1/+1
Legacy code should not benefit from newer features, especially in helpers that have been deprecated for a very long time. People who want NV-DDR support must migrate their driver to the ->exec_op() API. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210505213750.257417-13-miquel.raynal@bootlin.com
2021-05-26mtd: rawnand: Add onfi_fill_nvddr_interface_config() helperMiquel Raynal3-0/+44
Same logic as for the SDR path, let's create a onfi_fill_nvddr_interface_config() helper to fill an interface configuration structure with NV-DDR timings, given a specific ONFI mode. There is one additional thing to do compared to SDR mode: tCAD timing can be fast or slow and this depends on an ONFI parameter page bit. By default the slow value is declared in the timings structure definition, but this helper can shrink it down if necessary. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210505213750.257417-12-miquel.raynal@bootlin.com
2021-05-26mtd: rawnand: Add an indirection on onfi_fill_interface_config()Miquel Raynal1-10/+22
This helper actually fills the interface configuration with SDR data. As part of the work to bring NV-DDR support, let's rename this helper onfi_fill_sdr_interface_config() and add a generic indirection to it. There are no functional changes here, but this will simplify a next change which adds onfi_fill_nvddr_interface_config() support. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210505213750.257417-11-miquel.raynal@bootlin.com
2021-05-26mtd: rawnand: Retrieve NV-DDR timing modes from the ONFI parameter pageMiquel Raynal2-0/+5
When parsing the ONFI parameter page, save the available NV-DDR timing modes in the core's dynamic ONFI structure. Once available to the rest of the core out of the ONFI driver, these values will then be used to derive the best timing mode. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210505213750.257417-10-miquel.raynal@bootlin.com
2021-05-26mtd: rawnand: Add NV-DDR timingsMiquel Raynal2-0/+367
Create the relevant ONFI NV-DDR timings structure and fill it with default values from the ONFI specification. Add the relevant structure entries and helpers. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210505213750.257417-9-miquel.raynal@bootlin.com
2021-05-26mtd: rawnand: Clarify the NV-DDR entries in the ONFI structureMiquel Raynal1-2/+3
Both src_sync_timing_mode and src_ssync_features entries of the ONFI parameter page have been updated and now are named nvddr_timing_modes, nvddr2_timing_modes and nvddr_nvddr2_features, which is much more understandable for someone which do not know the history of the ONFI specification. Update the relevant structure with regard to these changes. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210505213750.257417-8-miquel.raynal@bootlin.com
2021-05-26mtd: rawnand: Use more recent ONFI specification wordingMiquel Raynal5-9/+9
In particular, first ONFI specifications referred to SDR modes as asynchronous modes, which is not the term we usually have in mind. The spec has then been updated, so do the same here in the NAND subsystem to avoid any possible confusion. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210505213750.257417-7-miquel.raynal@bootlin.com
2021-05-26mtd: rawnand: Update dead URLMiquel Raynal1-2/+2
The current link to the ONFI specification is broken, the onfi.org website now points to materials on Micron's website. Update the URL accordingly. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210505213750.257417-6-miquel.raynal@bootlin.com
2021-05-26mtd: rawnand: onfi: Use the BIT() macro when possibleMiquel Raynal1-10/+10
Update the onfi.h header to use the BIT() macro. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Alexander Dahl <ada@thorsis.com> Link: https://lore.kernel.org/linux-mtd/20210505213750.257417-5-miquel.raynal@bootlin.com
2021-05-26mtd: rawnand: atmel: Check the proposed data interface is supportedMiquel Raynal1-0/+5
Check the data interface is supported in ->setup_interface() before acknowledging the timings. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210505213750.257417-4-miquel.raynal@bootlin.com
2021-05-26mtd: rawnand: arasan: Check the proposed data interface is supportedMiquel Raynal1-0/+5
Check the data interface is supported in ->setup_interface() before acknowledging the timings. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210505213750.257417-3-miquel.raynal@bootlin.com
2021-05-26mtd: rawnand: Add a helper to clarify the interface configurationMiquel Raynal2-2/+11
Name it nand_interface_is_sdr() which will make even more sense when nand_interface_is_nvddr() will be introduced. Use it when relevant. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210505213750.257417-2-miquel.raynal@bootlin.com
2021-05-26mtd: core: Potential NULL dereference in mtd_otp_size()Dan Carpenter1-1/+5
If kmalloc() fails then it could lead to a NULL dereference. Check and return -ENOMEM on error. Fixes: 4b361cfa8624 ("mtd: core: add OTP nvmem provider support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Michael Walle <michael@walle.cc> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/YJ6Iw3iNvGycAWV6@mwanda
2021-05-26mtd: core: Fix freeing of otp_info bufferJon Hunter1-4/+2
Commit 4b361cfa8624 ("mtd: core: add OTP nvmem provider support") is causing the following panic ... ------------[ cut here ]------------ kernel BUG at /local/workdir/tegra/linux_next/kernel/mm/slab.c:2730! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM Modules linked in: CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.13.0-rc2-next-20210518 #1 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) PC is at ___cache_free+0x3f8/0x51c ... [<c029bb1c>] (___cache_free) from [<c029c658>] (kfree+0xac/0x1bc) [<c029c658>] (kfree) from [<c06da094>] (mtd_otp_size+0xc4/0x108) [<c06da094>] (mtd_otp_size) from [<c06dc864>] (mtd_device_parse_register+0xe4/0x2b4) [<c06dc864>] (mtd_device_parse_register) from [<c06e3ccc>] (spi_nor_probe+0x210/0x2c0) [<c06e3ccc>] (spi_nor_probe) from [<c06e9578>] (spi_probe+0x88/0xac) [<c06e9578>] (spi_probe) from [<c066891c>] (really_probe+0x214/0x3a4) [<c066891c>] (really_probe) from [<c0668b14>] (driver_probe_device+0x68/0xc0) [<c0668b14>] (driver_probe_device) from [<c0666cf8>] (bus_for_each_drv+0x5c/0xbc) [<c0666cf8>] (bus_for_each_drv) from [<c0668694>] (__device_attach+0xe4/0x150) [<c0668694>] (__device_attach) from [<c06679e0>] (bus_probe_device+0x84/0x8c) [<c06679e0>] (bus_probe_device) from [<c06657f8>] (device_add+0x48c/0x868) [<c06657f8>] (device_add) from [<c06eb784>] (spi_add_device+0xa0/0x168) [<c06eb784>] (spi_add_device) from [<c06ec9a8>] (spi_register_controller+0x8b8/0xb38) [<c06ec9a8>] (spi_register_controller) from [<c06ecc3c>] (devm_spi_register_controller+0x14/0x50) [<c06ecc3c>] (devm_spi_register_controller) from [<c06f0510>] (tegra_spi_probe+0x33c/0x450) [<c06f0510>] (tegra_spi_probe) from [<c066abec>] (platform_probe+0x5c/0xb8) [<c066abec>] (platform_probe) from [<c066891c>] (really_probe+0x214/0x3a4) [<c066891c>] (really_probe) from [<c0668b14>] (driver_probe_device+0x68/0xc0) [<c0668b14>] (driver_probe_device) from [<c0668e30>] (device_driver_attach+0x58/0x60) [<c0668e30>] (device_driver_attach) from [<c0668eb8>] (__driver_attach+0x80/0xc8) [<c0668eb8>] (__driver_attach) from [<c0666c48>] (bus_for_each_dev+0x78/0xb8) [<c0666c48>] (bus_for_each_dev) from [<c0667c44>] (bus_add_driver+0x164/0x1e8) [<c0667c44>] (bus_add_driver) from [<c066997c>] (driver_register+0x7c/0x114) [<c066997c>] (driver_register) from [<c010223c>] (do_one_initcall+0x50/0x2b0) [<c010223c>] (do_one_initcall) from [<c11011f0>] (kernel_init_freeable+0x1a8/0x1fc) [<c11011f0>] (kernel_init_freeable) from [<c0c09190>] (kernel_init+0x8/0x118) [<c0c09190>] (kernel_init) from [<c01001b0>] (ret_from_fork+0x14/0x24) ... ---[ end trace 0f652dd222de75d7 ]--- In the function mtd_otp_size() a buffer is allocated by calling kmalloc() and a pointer to the buffer is stored in a variable 'info'. The pointer 'info' may then be incremented depending on the length returned from mtd_get_user/fact_prot_info(). If 'info' is incremented, when kfree() is called to free the buffer the above panic occurs because we are no longer passing the original address of the buffer allocated. Fix this by indexing through the buffer allocated to avoid incrementing the pointer. Fixes: 4b361cfa8624 ("mtd: core: add OTP nvmem provider support") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Reviewed-by: Michael Walle <michael@walle.cc> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210518185503.162787-1-jonathanh@nvidia.com
2021-05-26Merge branch 'bpf-xdp-bcast'Daniel Borkmann18-65/+1306
Hangbin Liu says: ==================== This patchset is a new implementation for XDP multicast support based on my previous 2 maps implementation[1]. The reason is that Daniel thinks the exclude map implementation is missing proper bond support in XDP context. And there is a plan to add native XDP bonding support. Adding a exclude map in the helper also increases the complexity of verifier and has drawbacks on performance. The new implementation just add two new flags BPF_F_BROADCAST and BPF_F_EXCLUDE_INGRESS to extend xdp_redirect_map for broadcast support. With BPF_F_BROADCAST the packet will be broadcasted to all the interfaces in the map. with BPF_F_EXCLUDE_INGRESS the ingress interface will be excluded when do broadcasting. The patchv11 link is here [2]. [1] https://lore.kernel.org/bpf/20210223125809.1376577-1-liuhangbin@gmail.com [2] https://lore.kernel.org/bpf/20210513070447.1878448-1-liuhangbin@gmail.com v12: As Daniel pointed out: a) defined as const u64 for flag_mask and action_mask in __bpf_xdp_redirect_map() b) remove BPF_F_ACTION_MASK in uapi header c) remove EXPORT_SYMBOL_GPL for xdpf_clone() v11: a) Use unlikely() when checking if this is for broadcast redirecting. b) Fix a tracepoint NULL pointer issue Jesper found c) Remove BPF_F_REDIR_MASK and just use OR flags to make the reader more clear about what's flags we are using d) Add the performace number with multi veth interfaces in patch 01 description. e) remove some sleeps to reduce the testing time in patch04. Re-struct the test and make clear what flags we are testing. v10: use READ/WRITE_ONCE when read/write map instead of xchg() v9: Update patch 01 commit description v8: use hlist_for_each_entry_rcu() when looping the devmap hash ojbs v7: No need to free xdpf in dev_map_enqueue_clone() if xdpf_clone failed. v6: Fix a skb leak in the error path for generic XDP v5: Just walk the map directly to get interfaces as get_next_key() of devmap hash may restart looping from the first key if the device get removed. After update the performace has improved 10% compired with v4. v4: Fix flags never cleared issue in patch 02. Update selftest to cover this. v3: Rebase the code based on latest bpf-next v2: fix flag renaming issue in patch 02 ==================== Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2021-05-26selftests/bpf: Add xdp_redirect_multi testHangbin Liu4-1/+526
Add a bpf selftest for new helper xdp_redirect_map_multi(). In this test there are 3 forward groups and 1 exclude group. The test will redirect each interface's packets to all the interfaces in the forward group, and exclude the interface in exclude map. Two maps (DEVMAP, DEVMAP_HASH) and two xdp modes (generic, drive) will be tested. XDP egress program will also be tested by setting pkt src MAC to egress interface's MAC address. For more test details, you can find it in the test script. Here is the test result. ]# time ./test_xdp_redirect_multi.sh Pass: xdpgeneric arp(F_BROADCAST) ns1-1 Pass: xdpgeneric arp(F_BROADCAST) ns1-2 Pass: xdpgeneric arp(F_BROADCAST) ns1-3 Pass: xdpgeneric IPv4 (F_BROADCAST|F_EXCLUDE_INGRESS) ns1-1 Pass: xdpgeneric IPv4 (F_BROADCAST|F_EXCLUDE_INGRESS) ns1-2 Pass: xdpgeneric IPv4 (F_BROADCAST|F_EXCLUDE_INGRESS) ns1-3 Pass: xdpgeneric IPv6 (no flags) ns1-1 Pass: xdpgeneric IPv6 (no flags) ns1-2 Pass: xdpdrv arp(F_BROADCAST) ns1-1 Pass: xdpdrv arp(F_BROADCAST) ns1-2 Pass: xdpdrv arp(F_BROADCAST) ns1-3 Pass: xdpdrv IPv4 (F_BROADCAST|F_EXCLUDE_INGRESS) ns1-1 Pass: xdpdrv IPv4 (F_BROADCAST|F_EXCLUDE_INGRESS) ns1-2 Pass: xdpdrv IPv4 (F_BROADCAST|F_EXCLUDE_INGRESS) ns1-3 Pass: xdpdrv IPv6 (no flags) ns1-1 Pass: xdpdrv IPv6 (no flags) ns1-2 Pass: xdpegress mac ns1-2 Pass: xdpegress mac ns1-3 Summary: PASS 18, FAIL 0 real 1m18.321s user 0m0.123s sys 0m0.350s Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/bpf/20210519090747.1655268-5-liuhangbin@gmail.com
2021-05-26sample/bpf: Add xdp_redirect_map_multi for redirect_map broadcast testHangbin Liu3-0/+393
This is a sample for xdp redirect broadcast. In the sample we could forward all packets between given interfaces. There is also an option -X that could enable 2nd xdp_prog on egress interface. Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/bpf/20210519090747.1655268-4-liuhangbin@gmail.com
2021-05-26xdp: Extend xdp_redirect_map with broadcast supportHangbin Liu11-15/+313
This patch adds two flags BPF_F_BROADCAST and BPF_F_EXCLUDE_INGRESS to extend xdp_redirect_map for broadcast support. With BPF_F_BROADCAST the packet will be broadcasted to all the interfaces in the map. with BPF_F_EXCLUDE_INGRESS the ingress interface will be excluded when do broadcasting. When getting the devices in dev hash map via dev_map_hash_get_next_key(), there is a possibility that we fall back to the first key when a device was removed. This will duplicate packets on some interfaces. So just walk the whole buckets to avoid this issue. For dev array map, we also walk the whole map to find valid interfaces. Function bpf_clear_redirect_map() was removed in commit ee75aef23afe ("bpf, xdp: Restructure redirect actions"). Add it back as we need to use ri->map again. With test topology: +-------------------+ +-------------------+ | Host A (i40e 10G) | ---------- | eno1(i40e 10G) | +-------------------+ | | | Host B | +-------------------+ | | | Host C (i40e 10G) | ---------- | eno2(i40e 10G) | +-------------------+ | | | +------+ | | veth0 -- | Peer | | | veth1 -- | | | | veth2 -- | NS | | | +------+ | +-------------------+ On Host A: # pktgen/pktgen_sample03_burst_single_flow.sh -i eno1 -d $dst_ip -m $dst_mac -s 64 On Host B(Intel(R) Xeon(R) CPU E5-2690 v3 @ 2.60GHz, 128G Memory): Use xdp_redirect_map and xdp_redirect_map_multi in samples/bpf for testing. All the veth peers in the NS have a XDP_DROP program loaded. The forward_map max_entries in xdp_redirect_map_multi is modify to 4. Testing the performance impact on the regular xdp_redirect path with and without patch (to check impact of additional check for broadcast mode): 5.12 rc4 | redirect_map i40e->i40e | 2.0M | 9.7M 5.12 rc4 | redirect_map i40e->veth | 1.7M | 11.8M 5.12 rc4 + patch | redirect_map i40e->i40e | 2.0M | 9.6M 5.12 rc4 + patch | redirect_map i40e->veth | 1.7M | 11.7M Testing the performance when cloning packets with the redirect_map_multi test, using a redirect map size of 4, filled with 1-3 devices: 5.12 rc4 + patch | redirect_map multi i40e->veth (x1) | 1.7M | 11.4M 5.12 rc4 + patch | redirect_map multi i40e->veth (x2) | 1.1M | 4.3M 5.12 rc4 + patch | redirect_map multi i40e->veth (x3) | 0.8M | 2.6M Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Link: https://lore.kernel.org/bpf/20210519090747.1655268-3-liuhangbin@gmail.com
2021-05-26bpf: Run devmap xdp_prog on flush instead of bulk enqueueJesper Dangaard Brouer1-51/+76
This changes the devmap XDP program support to run the program when the bulk queue is flushed instead of before the frame is enqueued. This has a couple of benefits: - It "sorts" the packets by destination devmap entry, and then runs the same BPF program on all the packets in sequence. This ensures that we keep the XDP program and destination device properties hot in I-cache. - It makes the multicast implementation simpler because it can just enqueue packets using bq_enqueue() without having to deal with the devmap program at all. The drawback is that if the devmap program drops the packet, the enqueue step is redundant. However, arguably this is mostly visible in a micro-benchmark, and with more mixed traffic the I-cache benefit should win out. The performance impact of just this patch is as follows: Using 2 10Gb i40e NIC, redirecting one to another, or into a veth interface, which do XDP_DROP on veth peer. With xdp_redirect_map in sample/bpf, send pkts via pktgen cmd: ./pktgen_sample03_burst_single_flow.sh -i eno1 -d $dst_ip -m $dst_mac -t 10 -s 64 There are about +/- 0.1M deviation for native testing, the performance improved for the base-case, but some drop back with xdp devmap prog attached. Version | Test | Generic | Native | Native + 2nd xdp_prog 5.12 rc4 | xdp_redirect_map i40e->i40e | 1.9M | 9.6M | 8.4M 5.12 rc4 | xdp_redirect_map i40e->veth | 1.7M | 11.7M | 9.8M 5.12 rc4 + patch | xdp_redirect_map i40e->i40e | 1.9M | 9.8M | 8.0M 5.12 rc4 + patch | xdp_redirect_map i40e->veth | 1.7M | 12.0M | 9.4M When bq_xmit_all() is called from bq_enqueue(), another packet will always be enqueued immediately after, so clearing dev_rx, xdp_prog and flush_node in bq_xmit_all() is redundant. Move the clear to __dev_flush(), and only check them once in bq_enqueue() since they are all modified together. This change also has the side effect of extending the lifetime of the RCU-protected xdp_prog that lives inside the devmap entries: Instead of just living for the duration of the XDP program invocation, the reference now lives all the way until the bq is flushed. This is safe because the bq flush happens at the end of the NAPI poll loop, so everything happens between a local_bh_disable()/local_bh_enable() pair. However, this is by no means obvious from looking at the call sites; in particular, some drivers have an additional rcu_read_lock() around only the XDP program invocation, which only confuses matters further. Cleaning this up will be done in a separate patch series. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20210519090747.1655268-2-liuhangbin@gmail.com
2021-05-26w1: fix build warning in w1_ds2438.rstGreg Kroah-Hartman1-1/+1
commit c999fbbdcf77 ("w1: ds2438: support for writing to offset register") added more documentation, but had a one-off line for the header of a section which caused the build warning: Documentation/w1/slaves/w1_ds2438.rst:56: WARNING: Title underline too short. Resolve this by fixing the underline to be long enough. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Link: https://lore.kernel.org/r/YKthRzCGan9WEcmP@kroah.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-26w1: ds2482: fix kernel-doc syntax in fileAditya Srivastava1-47/+47
The opening comment mark '/**' is used for highlighting the beginning of kernel-doc comments. The comments for drivers/w1/masters/ds2482.c follows this syntax, but the content inside does not comply with kernel-doc. Similarly, the syntax for function and arguments declaration as well. Fix all such occurrences appropriately. Tested-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Aditya Srivastava <yashsri421@gmail.com> Link: https://lore.kernel.org/r/20210523150122.21160-1-yashsri421@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-26sched: Stop PF_NO_SETAFFINITY from being inherited by various init system ↵Frederic Weisbecker1-1/+1
threads Commit: 00b89fe0197f ("sched: Make the idle task quack like a per-CPU kthread") ... added PF_KTHREAD | PF_NO_SETAFFINITY to the idle kernel threads. Unfortunately these properties are inherited to the init/0 children through kernel_thread() calls: init/1 and kthreadd. There are several side effects to that: 1) kthreadd affinity can not be reset anymore from userspace. Also PF_NO_SETAFFINITY propagates to all kthreadd children, including the unbound kthreads Therefore it's not possible anymore to overwrite the affinity of any of them. Here is an example of warning reported by rcutorture: WARNING: CPU: 0 PID: 116 at kernel/rcu/tree_nocb.h:1306 rcu_bind_current_to_nocb+0x31/0x40 Call Trace: rcu_torture_fwd_prog+0x62/0x730 kthread+0x122/0x140 ret_from_fork+0x22/0x30 2) init/1 does an exec() in the end which clears both PF_KTHREAD and PF_NO_SETAFFINITY so we are fine once kernel_init() escapes to userspace. But until then, no initcall or init code can successfully call sched_setaffinity() to init/1. Also PF_KTHREAD looks legit on init/1 before it calls exec() but we better be careful with unknown introduced side effects. One way to solve the PF_NO_SETAFFINITY issue is to not inherit this flag on copy_process() at all. The cases where it matters are: * fork_idle(): explicitly set the flag already. * fork() syscalls: userspace tasks that shouldn't be concerned by that. * create_io_thread(): the callers explicitly attribute the flag to the newly created tasks. * kernel_thread(): - Fix the issues on init/1 and kthreadd - Fix the issues on kthreadd children. - Usermode helper created by an unbound workqueue. This shouldn't matter. In the worst case it gives more control to userspace on setting affinity to these short living tasks although this can be tuned with inherited unbound workqueues affinity already. Fixes: 00b89fe0197f ("sched: Make the idle task quack like a per-CPU kthread") Reported-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Paul E. McKenney <paulmck@kernel.org> Link: https://lore.kernel.org/r/20210525235849.441842-1-frederic@kernel.org
2021-05-26riscv: Turn has_fpu into a static key if FPU=yJisheng Zhang4-8/+13
The has_fpu check sits at hot code path: switch_to(). Currently, has_fpu is a bool variable if FPU=y, switch_to() checks it each time, we can optimize out this check by turning the has_fpu into a static key. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-05-26riscv: Optimize switch_mm by passing "cpu" to flush_icache_deferred()Jisheng Zhang1-3/+4
Directly passing the cpu to flush_icache_deferred() rather than calling smp_processor_id() again. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> [Palmer: drop the QEMU performance numbers, and update the comment] Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-05-26riscv: mm: Drop redundant _sdata and _edata declarationKefeng Wang1-7/+1
The _sdata/_edata is already in sections.h, drop redundant declaration. Also move _xiprom/_exiprom declarations at the beginning of the file, cleanup one CONFIG_XIP_KERNEL. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-05-26riscv: Move setup_bootmem into paging_initKefeng Wang3-3/+2
Make setup_bootmem() static. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-05-26riscv: enable generic PCI resource mappingStanislaw Kardach1-0/+2
Enable the PCI resource mapping on RISC-V using the generic framework. This allows userspace applications to mmap PCI resources using /sys/devices/pci*/*/resource* interface. The mmap has been tested with Intel x520-DA2 NIC card on a HiFive Unmatched board (SiFive FU740 SoC). Signed-off-by: Stanislaw Kardach <kda@semihalf.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-05-26riscv: mm: Remove setup_zero_page()Jisheng Zhang1-6/+0
The empty_zero_page sits at .bss..page_aligned section, so will be cleared to zero during clearing bss, we don't need to clear it again. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-05-26riscv: mremap speedup - enable HAVE_MOVE_PUD and HAVE_MOVE_PMDJisheng Zhang2-0/+13
HAVE_MOVE_PUD enables remapping pages at the PUD level if both the source and destination addresses are PUD-aligned. HAVE_MOVE_PMD does similar speedup on the PMD level. With HAVE_MOVE_PUD enabled, there is about a 143x improvement on qemu With HAVE_MOVE_PMD enabled, there is about a 5x improvement on qemu Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-05-26net: Remove unnecessary variableszuoqilin1-5/+1
It is not necessary to define variables to receive -ENOMEM, directly return -ENOMEM. Signed-off-by: zuoqilin <zuoqilin@yulong.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2021-05-26soc: qcom: socinfo: Add more IDsLuca Weiss1-0/+27
Add the IDs for the following families of chips: 8064, 8226, 8610, 8625Q Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Link: https://lore.kernel.org/r/20210504203612.95056-1-luca@z3ntu.xyz Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-26soc: qcom: rpmhpd: Add SC8180XBjorn Andersson1-0/+21
Add the power domains exposed by RPMH in the Qualcomm SC8180X platform. Reviewed-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20210120225037.1611353-2-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-26dt-bindings: power: rpmpd: Add SC8180X to rpmpd bindingBjorn Andersson2-0/+14
Add compatible and constants for the power domains exposed by the RPMH in the Qualcomm SC8180X platform. Reviewed-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210120225037.1611353-1-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-26dt-bindings: soc: qcom: smd-rpm: Document SM6125 compatibleMartin Botka1-0/+1
Add the SM6125 compatible to the documentation Signed-off-by: Martin Botka <martin.botka@somainline.org> Link: https://lore.kernel.org/r/20210523211556.731976-3-martin.botka@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-26soc: qcom: smd-rpm: Add SM6125 compatibleMartin Botka1-0/+1
Add a compatible for SM6125 Signed-off-by: Martin Botka <martin.botka@somainline.org> Link: https://lore.kernel.org/r/20210523211556.731976-1-martin.botka@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-26soc: qcom: socinfo: Add remaining IPQ6018 family ID-sRobert Marko1-0/+4
ID for IPQ6018 was previously added, but ID-s for rest of the family are missing. So, lets add those based on downstream driver. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Reviewed-by: Kathiravan T <kathirav@codeaurora.org> Link: https://lore.kernel.org/r/20210517120034.3975027-1-robert.marko@sartura.hr Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-26soc: qcom: socinfo: Add missing SoC ID for SM6125Martin Botka1-0/+1
Add SM6125 SoC ID to the soc_id struct Signed-off-by: Martin Botka <martin.botka@somainline.org> Link: https://lore.kernel.org/r/20210523212038.736445-2-martin.botka@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-26drm/radeon: remove the repeated declarationShaokun Zhang1-2/+0
Function 'r300_mc_wait_for_idle' and 'r600_mc_wait_for_idle' are declared twice, remove the repeated declaration. Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-26drm/radeon/evergreen: Remove the repeated declarationShaokun Zhang1-1/+0
Function 'evergreen_print_gpu_status_regs' is declared twice, remove the repeated declaration. Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-26drm/amd/display: Remove the repeated declarationShaokun Zhang1-2/+0
Function 'dc_power_down_on_boot' is declared twice, remove the repeated declaration. Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-26drm/amdgpu: refine amdgpu_fru_get_product_infoJiansong Chen1-19/+23
1. eliminate potential array index out of bounds. 2. return meaningful value for failure. Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com> Reviewed-by: Jack Gui <Jack.Gui@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-26drm/amdgpu: Change IP init sequence to support PSP program IH_RB_CNTL on ↵Peng Ju Zhou1-2/+7
NV12 SRIOV To enable PSP program IH_RB_CNTL, the PSP IP should be initialized before IH IP, otherwise, it will hit psp NULL pointer. Signed-off-by: Peng Ju Zhou <PengJu.Zhou@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-26drm/amdgpu: Fix an error code in kfd_mem_attach_dmabuf()Dan Carpenter1-1/+3
If amdgpu_gem_prime_export() fails, then this code accidentally returns zero/success instead of a negative error code. Fixes: 5ac3c3e45fb93d ("drm/amdgpu: Add DMA mapping of GTT BOs") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-26drm/amdgpu: add missing unreserve on errorDan Carpenter1-2/+1
The amdgpu_bo_unreserve() has to be done on the error path as well. Fixes: 9e5d275319e224 ("drm/amdgpu: Move kfd_mem_attach outside reservation") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-26drm/amdgpu: add judgement for dc supportAsher Song1-1/+3
Drop DC initialization when DCN is harvested in VBIOS. The way doesn't affect virtual display ip initialization. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Signed-off-by: Asher Song <Asher.Song@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-26drm/amdgpu: fix typotony.huang_cp1-2/+2
change 'interupt' to 'interrupt' Signed-off-by: tony.huang_cp <huangwentao@yulong.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-26arm64: dts: qcom: msm8996: Add DMA to QUPs and UARTsKonrad Dybcio1-0/+38
Add BAM DMA nodes and add required properties to devices to enable DMA operations. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210525200246.118323-5-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-26arm64: dts: qcom: msm8996: Strictly limit USB2 host to USB2 speedsKonrad Dybcio1-0/+2
As the name implies, the USB2 controller should only operate at USB2 speeds. Make sure it does just that by pinning it to USB High-Speed (USB2) mode. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210525200246.118323-3-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-26arm64: dts: qcom: sc7280: Add ADC channel nodes for PMIC temperatures to ↵satya priya1-0/+30
sc7280-idp Add channel nodes for the on die temperatures of PMICS pmk8350, pm8350, pmr735a and pmr735b. Signed-off-by: satya priya <skakit@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/1621937466-1502-11-git-send-email-skakit@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-26arm64: dts: qcom: sc7280: Include PMIC DT files for sc7280-idpsatya priya1-0/+4
The sc7280-idp has four PMICs, include their .dtsi files. Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: satya priya <skakit@codeaurora.org> Link: https://lore.kernel.org/r/1621937466-1502-10-git-send-email-skakit@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>