summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-05-31thunderbolt: Add wake from DisplayPortMika Westerberg5-5/+14
Latest USB4 spec added a new wake bit for DisplayPort so add this to the driver when runtime suspending. This way wake up the domain when a new monitor is plugged in to any of the device routers. Also do the same for pre-USB4 devices through the link controller registers as documented in chapter 13 of the USB4 spec. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-05-31Documentation / thunderbolt: Clean up entriesMika Westerberg1-22/+22
Align the "What" entries along with the rest and move nvm_authenticate_on_disconnect to correct place. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-05-31thunderbolt: Use generic tb_nvm_[read|write]_data() for Thunderbolt 2/3 devicesMika Westerberg1-79/+15
Now that we have generic functionality available in nvm.c make the DMA port code call it instead of duplicating the functionality. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-05-31thunderbolt: Split NVM read/write generic functions out from usb4.cMika Westerberg3-92/+124
We do this for Thunderbolt 2/3 devices through DMA port, USB4 devices and retimers pretty much the same way. Only the actual block read/write is different. For this reason split out the NVM read/write functions from usb4.c to nvm.c and make USB4 device code call these when needed. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-05-31thunderbolt: Add self-authenticate support for new dockCrag Wang1-0/+1
Add new device known to support self-authenticate on disconnect. Signed-off-by: Crag Wang <crag.wang@dell.com> Reviewed-by: Mario Limonciello <mario.limonciello@outlook.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-05-31drm/bridge: lt8912b: Drop unused includesLinus Walleij1-2/+0
The Lontium bridge is including legacy header files for GPIO but not using them. Delete the includes. Cc: Adrien Grassein <adrien.grassein@gmail.com> Cc: Robert Foss <robert.foss@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Adren Grassein <adrien.grassein@gmail.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210529002759.468964-1-linus.walleij@linaro.org
2021-05-31soundwire: cadence: remove the repeated declarationShaokun Zhang1-3/+0
Function 'cdns_reset_page_addr' is declared twice, so remove the repeated declaration. Cc: Vinod Koul <vkoul@kernel.org> Cc: Bard Liao <yung-chuan.liao@linux.intel.com> Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Cc: Sanyog Kale <sanyog.r.kale@intel.com> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/1622114698-7943-1-git-send-email-zhangshaokun@hisilicon.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-31gfs2: Fix use-after-free in gfs2_glock_shrink_scanHillf Danton1-1/+1
The GLF_LRU flag is checked under lru_lock in gfs2_glock_remove_from_lru() to remove the glock from the lru list in __gfs2_glock_put(). On the shrink scan path, the same flag is cleared under lru_lock but because of cond_resched_lock(&lru_lock) in gfs2_dispose_glock_lru(), progress on the put side can be made without deleting the glock from the lru list. Keep GLF_LRU across the race window opened by cond_resched_lock(&lru_lock) to ensure correct behavior on both sides - clear GLF_LRU after list_del under lru_lock. Reported-by: syzbot <syzbot+34ba7ddbf3021981a228@syzkaller.appspotmail.com> Signed-off-by: Hillf Danton <hdanton@sina.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2021-05-31m68k: defconfig: Update defconfigs for v5.13-rc1Geert Uytterhoeven12-24/+36
- Drop CONFIG_NF_LOG_NETDEV=m (removed in commit 1510618e45cb9fb7 ("netfilter: nf_log_netdev: merge with nf_log_syslog")), - Enable modular build of IPv4 packet logging (no longer auto-enabled since commit db3187ae21bb0cff ("netfilter: nf_log_ipv4: rename to nf_log_syslog")), - Drop CONFIG_NF_LOG_BRIDGE=m (removed in commit 77ccee96a67422ac ("netfilter: nf_log_bridge: merge with nf_log_syslog")), - Enable modular build of ECDSA crypto algorithm, - Enable modular build of 64bit/32bit division and modulo test. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/20210510095302.4125561-1-geert@linux-m68k.org
2021-05-31MAINTAINERS, .mailmap: Update Finn Thain's email addressFinn Thain2-2/+3
Signed-off-by: Finn Thain <fthain@linux-m68k.org> Link: https://lore.kernel.org/r/fc397a7074d627e22974ef8927910ad08744db5c.1621988847.git.fthain@linux-m68k.org Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2021-05-31dt-bindings: soc: rockchip: convert grf.txt to YAMLJohan Jonker2-61/+260
Current dts files with 'grf' nodes are manually verified. In order to automate this process grf.txt has to be converted to YAML. Most compatibility strings are in use with "simple-mfd" added. Changed compatibles: "rockchip,rk3066-grf", "syscon", "simple-mfd" "rockchip,rk3188-grf", "syscon", "simple-mfd" Add description already in use: "rockchip,rv1108-pmugrf", "syscon" Add new descriptions for: "rockchip,rk3568-grf", "syscon", "simple-mfd" "rockchip,rk3568-pmugrf", "syscon", "simple-mfd" Signed-off-by: Johan Jonker <jbx6244@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210512122346.9463-3-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-05-31ARM: tegra_defconfig: Enable CONFIG_DEVFREQ_THERMALDmitry Osipenko1-0/+1
Memory-related Tegra devfreq devices now could be used as a cooling devices. Enable CONFIG_DEVFREQ_THERMAL by default since this option enables cooling functionality of the devfreq drivers. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-05-31ARM: dts: sun8i: v3s: enable emac for zero DockAndreas Rehn1-4/+13
dwmac-sun8i supports v3s and Licheepi-zero Dock provides an ethernet port furthermore, align nodes in alphabetical order Signed-off-by: Andreas Rehn <rehn.andreas86@gmail.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210525173159.183415-1-rehn.andreas86@gmail.com
2021-05-31ARM: tegra: ouya: Enable memory frequency thermal throttling using ACTMONDmitry Osipenko1-1/+3
The ACTMON module monitors activity of memory clients and then devfreq driver makes decisions about a required memory frequency based on info from ACTMON. Add ACTMON device to the thermal zone of Ouya in order to use it as a cooling device which throttles memory freq on overheat. Tested-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Matt Merhar <mattmerhar@protonmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-05-31ARM: tegra: nexus7: Enable memory frequency thermal throttling using ACTMONDmitry Osipenko1-1/+3
The ACTMON module monitors activity of memory clients and then devfreq driver makes decisions about a required memory frequency based on info from ACTMON. Add ACTMON device to the thermal zone of Nexus 7 in order to use it as a cooling device which throttles memory freq on overheat. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-05-31ARM: tegra: Add cooling cells to ACTMON device-tree nodeDmitry Osipenko2-2/+4
The ACTMON module monitors activity of memory clients and decisions about a minimum required memory frequency are made based on info from ACTMON. Add cooling cells to ACTMON device-tree node in order to turn it into a cooling device that will throttle memory freq on overheat. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-05-31ARM: tegra: nexus7: Correct 3v3 regulator GPIO of PM269 variantDmitry Osipenko1-1/+1
The 3v3 regulator GPIO is GP6 and not GP7, which is the DDR regulator. Both regulators are always-on, nevertheless the DT model needs to be corrected, fix it. Reported-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-05-31ARM: tegra: nexus7: Remove monitored-battery propertyDmitry Osipenko1-1/+0
The bq27541 Linux kernel driver will try to reprogram controller based on the values from monitored-battery node, but it fails to do so because controller was locked by manufacturer. Still this is a very undesirable behaviour, hence let's remove the optional battery node. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-05-31ARM: tegra: nexus7: Improve thermal zonesDmitry Osipenko1-9/+2
Remove unused thermal zone just to clean up device-tree and set critical temperature further apart from the passive cooling trip point since during or thermal testing of Asus Transformer devices we found that CPU could reach the critical temperature in a certain kernel configurations for a brief moment if critical trip point is set close to the passive trip point and then device will be immediately shut off without getting a chance to cool down using passive cooling. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-05-31ARM: tegra: nexus7: Add i2c-thermtrip nodeDmitry Osipenko2-0/+18
Add i2c-thermtrip node which enables emergency shutdown by PMC on SoC die overheat detected by TSENSOR. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-05-31ARM: tegra: paz00: Add CPU thermal zoneDmitry Osipenko1-2/+40
Add thermal zone with a passive cooling trip for CPU. Attach it to the LM90 sensor which monitors CPU temperature. Now CPU frequencies will be throttled once trip point is reached, preventing critical overheat. Tested-by: Agneli <poczt@protonmail.ch> Tested-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-05-31ARM: tegra: wm8903: Fix polarity of headphones-detection GPIO in device-treesDmitry Osipenko8-8/+8
All Tegra boards which use WM8903 audio codec are specifying a wrong polarity for the headphones detection GPIO. The kernel driver hardcodes the polarity to active-low, which is the correct polarity, so we can fix the device-trees safely. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-05-31ARM: tegra: Add reg property to Tegra20 EMC table device-tree nodesDmitry Osipenko2-0/+5
The reg property is now specified for the emc-tables nodes in the Tegra20 device-tree binding. Add reg property to the EMC table device-tree nodes of Tegra20 board device-trees in order to silence dt_binding_check warning about the missing property. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-05-31ARM: tegra: acer-a500: Bump thermal trips by 10CDmitry Osipenko1-4/+4
It's possible to hit the temperature of the thermal zone in a very warm environment under a constant load, like watching a video using software decoding. It's even easier to hit the limit with a slightly overclocked CPU. Bump the temperature limit by 10C in order to improve user experience. Acer A500 has a large board and 10" display panel which are used for the heat dissipation, the SoC is placed far away from battery, hence we can safely bump the temperature limit. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-05-31ARM: tegra: acer-a500: Specify proper voltage for WiFi SDIO busDmitry Osipenko1-1/+1
Tegra20 has v2.00 SDMMC controller which doesn't support voltage switching and the WiFi SDIO bus voltage is fixed to 1.8v in accordance to the board's schematics, while MMC core confusingly saying that it's 3.3v because of the v2.00. Let's correct the voltage in the device-tree just for consistency. This is a minor improvement which doesn't fix any problems. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-05-31ARM: tegra: acer-a500: Improve microphone detectionDmitry Osipenko1-1/+4
Use edge-triggered interrupt and set delay to 100ms for microphone hook detection. This doesn't fix any known problems, but there is a smaller chance to miss insertion of the microphone now, which previously happened rarely. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-05-31pinctrl: renesas: r8a77980: Add bias pinconf supportGeert Uytterhoeven1-6/+203
Implement support for pull-up and pull-down handling for the R-Car V3H SoC, using the common R-Car bias handling. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/448f47ccd89d9bc8621c7fda8c81508deb05cb82.1619785375.git.geert+renesas@glider.be
2021-05-31pinctrl: renesas: r8a77970: Add bias pinconf supportGeert Uytterhoeven1-6/+169
Implement support for pull-up (most pins, excl. DU_DOTCLKIN and EXTALR) and pull-down (most pins, excl. JTAG) handling for the R-Car V3M SoC, using the common R-Car bias handling. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/bcfad447624d874258a45a92554574b8fe9f712f.1619785375.git.geert+renesas@glider.be
2021-05-31pinctrl: renesas: r8a7794: Add bias pinconf supportGeert Uytterhoeven1-9/+351
Implement support for pull-up (most pins) and pull-down (ASEBRK#/ACK) handling for R-Car E2 and RZ/G1E SoCs, using the common R-Car bias handling. Note that on RZ/G1E, the "ASEBRK#/ACK" pin is called "ACK", but the code doesn't handle that naming difference. Hence users should use the R-Car naming in DTS files. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/f78da2ba937ce98ae9196f4ee54149a5214fd545.1619785375.git.geert+renesas@glider.be
2021-05-31pinctrl: renesas: r8a7792: Add bias pinconf supportGeert Uytterhoeven1-12/+521
Implement support for pull-up (most pins) and pull-down (EDBGREQ) handling for the R-Car V2H SoC, using the common R-Car bias handling. Note that the R-Car V2H Hardware User's Manual Rev. 1.00 says that the LSI Pin Pull-Up Control Register 11 (PUPR11) controls pull-ups for the {SCK,WS,SDATA}[01] pins. These are assumed to be typos, as R-Car V2H has only Serial Sound Interface channels 3 and 4. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/48d2abdd63ee43ed99cb32ed4a5f4d76ba563162.1619785375.git.geert+renesas@glider.be
2021-05-31pinctrl: renesas: r8a7790: Add bias pinconf supportGeert Uytterhoeven1-7/+294
Implement support for pull-up (most pins) and pull-down (ASEBRK#/ACK) handling for R-Car H2 and RZ/G1H SoCs, using the common R-Car bias handling. Note that on RZ/G1H, the "ASEBRK#/ACK" pin is called "ACK", but the code doesn't handle that naming difference. Hence users should use the R-Car naming in DTS files. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/dde6e0b36a4e4494039a3466df208b5ec5c594ee.1619785375.git.geert+renesas@glider.be
2021-05-31pinctrl: renesas: r8a77470: Add bias pinconf supportGeert Uytterhoeven1-40/+306
Implement support for pull-up (most pins) and pull-down (ASEBRK#/ACK) handling for the RZ/G1C SoC, using the common R-Car bias handling. Note that on RZ/G1C, the "ASEBRK#/ACK" pin is called "ACK", but the code doesn't handle that naming difference. Hence users should use the R-Car naming in DTS files. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/18c8ebf9fa9e239253a723857e9dffeec775db7e.1619785375.git.geert+renesas@glider.be
2021-05-31x86/cstate: Allow ACPI C1 FFH MWAIT use on Hygon systemsPu Wen1-1/+2
Hygon systems support the MONITOR/MWAIT instructions and these can be used for ACPI C1 in the same way as on AMD and Intel systems. The BIOS declares a C1 state in _CST to use FFH and CPUID_Fn00000005_EDX is non-zero on Hygon systems. Allow ffh_cstate_init() to succeed on Hygon systems to default using FFH MWAIT instead of HALT for ACPI C1. Signed-off-by: Pu Wen <puwen@hygon.cn> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20210528081417.31474-1-puwen@hygon.cn
2021-05-31ARM: dts: silk: Configure pull-up for SOFT_SW GPIO keysGeert Uytterhoeven1-1/+9
The GPIO pins connected to the 4 Software Switches ("SOFT_SW", SW12) do not have external pull-up resistors, but rely on internal pull-ups being enabled. Fortunately this is satisfied by the initial state of these pins. Make this explicit by enabling bias-pull-up, to remove the dependency on initial state and/or boot loader configuration. While at it, rename the surrounding device node from "gpio-keys" to "keyboard", to comply with generic node name recommendations. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/45f38a5333feba9bea80efeb5a41a6c3f60deda2.1619785905.git.geert+renesas@glider.be
2021-05-31ARM: dts: gose: Configure pull-up for SOFT_SW GPIO keysGeert Uytterhoeven1-1/+9
The GPIO pins connected to the 4 Software Switches ("SOFT_SW", SW2) do not have external pull-up resistors, but rely on internal pull-ups being enabled. Fortunately this is satisfied by the initial state of these pins. Make this explicit by enabling bias-pull-up, to remove the dependency on initial state and/or boot loader configuration. While at it, rename the surrounding device node from "gpio-keys" to "keyboard", to comply with generic node name recommendations. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/1cdec892b1491309b12bdaf7bc8428b3a19b1ed5.1619785905.git.geert+renesas@glider.be
2021-05-31ARM: dts: blanche: Configure pull-up for SOFT_SW and SW25 GPIO keysGeert Uytterhoeven1-0/+8
The GPIO pins connected to the 4 Software Switches (SW2) and the second Tact Switch (SW25) do not have external pull-up resistors, but rely on internal pull-ups being enabled. Fortunately this is satisfied by the initial state of these pins. Make this explicit by enabling bias-pull-up, to remove the dependency on initial state and/or boot loader configuration. Note that the GPIO pin connected to the first Tact Switch (SW24) does have an external pull-up resistor. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/011e4c461767f2dd690b655b3dd501eb554184c1.1619785905.git.geert+renesas@glider.be
2021-05-31ARM: dts: lager: Configure pull-up for SOFT_SW GPIO keysGeert Uytterhoeven1-0/+8
The GPIO pins connected to the 4 Software Switches (SW2) do not have external pull-up resistors, but rely on internal pull-ups being enabled. Fortunately this is satisfied by the initial state of these pins. Make this explicit by enabling bias-pull-up, to remove the dependency on initial state and/or boot loader configuration. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/9fae3c0c2c0000f6b43c9ce87fe64a594b30a7da.1619785905.git.geert+renesas@glider.be
2021-05-31arm64: dts: renesas: r8a7796[01]: Fix OPP table entry voltagesGeert Uytterhoeven2-6/+6
Correct the voltages in the "Power Optimized" (<= 1.5 GHz) Cortex-A57 operating point table entries for the R-Car M3-W and M3-W+ SoCs from 0.82V to 0.83V, as per the R-Car Gen3 EC Manual Errata for Revision 0.53. Based on a patch for R-Car M3-W in the BSP by Takeshi Kihara <takeshi.kihara.df@renesas.com>. Fixes: da7e3113344fda50 ("arm64: dts: renesas: r8a7796: Add OPPs table for cpu devices") Fixes: f51746ad7d1ff6b4 ("arm64: dts: renesas: Add Renesas R8A77961 SoC support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/b9e9db907514790574429b83d070c823b36085ef.1619699909.git.geert+renesas@glider.be
2021-05-31arm64: dts: renesas: Add missing opp-suspend propertiesGeert Uytterhoeven3-0/+3
Tag the highest "Power Optimized" (1.5 GHz) Cortex-A57 operating point table entries for the RZ/G2M, R-Car M3-W and M3-W+ SoCs with the "opp-suspend" property. This makes sure the system will enter suspend in the same performance state as it will be resumed by the firmware later, avoiding state inconsistencies after resume. Based on a patch for R-Car M3-W in the BSP by Takeshi Kihara <takeshi.kihara.df@renesas.com>. Fixes: 800037e815b91d8c ("arm64: dts: renesas: r8a774a1: Add operating points") Fixes: da7e3113344fda50 ("arm64: dts: renesas: r8a7796: Add OPPs table for cpu devices") Fixes: f51746ad7d1ff6b4 ("arm64: dts: renesas: Add Renesas R8A77961 SoC support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/45a061c3b0463aac7d10664f47c4afdd999da50d.1619699721.git.geert+renesas@glider.be
2021-05-31phy: ti: Fix an error code in wiz_probe()Yang Li1-0/+1
When the code execute this if statement, the value of ret is 0. However, we can see from the dev_err() log that the value of ret should be -EINVAL. Clean up smatch warning: drivers/phy/ti/phy-j721e-wiz.c:1216 wiz_probe() warn: missing error code 'ret' Reported-by: Abaci Robot <abaci@linux.alibaba.com> Fixes: c9f9eba06629 ("phy: ti: j721e-wiz: Manage typec-gpio-dir") Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/1621939832-65535-1-git-send-email-yang.lee@linux.alibaba.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-31phy: phy-twl4030-usb: use DEVICE_ATTR_RO macroYueHaibing1-3/+3
Use DEVICE_ATTR_RO helper instead of plain DEVICE_ATTR, which makes the code a bit shorter and easier to read. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20210520135132.37628-1-yuehaibing@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-31dt-bindings: phy: convert rockchip-usb-phy.txt to YAMLJohan Jonker2-52/+81
Current dts files with Rockchip 'usbphy' nodes are manually verified. In order to automate this process rockchip-usb-phy.txt has to be converted to YAML. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210518165658.12764-2-jbx6244@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-31phy: phy-rockchip-inno-usb2: add support for RK3308 USB phyTobias Schramm1-0/+44
The RK3308 SoC uses a slightly different USB phy than other Rockchip parts. This commit adds support for that phy. Signed-off-by: Tobias Schramm <t.schramm@manjaro.org> Link: https://lore.kernel.org/r/20210514150044.2099298-3-t.schramm@manjaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-31dt-bindings: phy: rockchip-inno-usb2: add compatible for rk3308 USB phyTobias Schramm1-0/+1
The RK3308 features a slightly different USB phy than other Rockchip SoCs. This patch adds a compatible string for it. Signed-off-by: Tobias Schramm <t.schramm@manjaro.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210514150044.2099298-2-t.schramm@manjaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-31phy: stm32: manage optional vbus regulator on phy_power_on/offAmelie Delaunay1-0/+31
This patch adds support for optional vbus regulator. It is managed on phy_power_on/off calls and may be needed for host mode. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20210517120821.26466-3-amelie.delaunay@foss.st.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-31dt-bindings: phy: add vbus-supply optional property to phy-stm32-usbphycAmelie Delaunay1-0/+11
This patch adds vbus-supply optional property to phy sub-nodes using connector node. A regulator for USB VBUS may be needed for host mode. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20210517120821.26466-2-amelie.delaunay@foss.st.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-31phy: qcom-qmp: remove redundant error of clock bulkChunfeng Yun1-6/+2
There is error log in clk_bulk_prepare/enable() Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1621229841-22984-1-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-31phy: phy-xgene.c: Fix alignment of commentShubhankar Kuranagatti1-1/+2
A * has been added at the starting of new line The closing */ of multi line comment shifted to new line This is done to maintain code uniformity. Signed-off-by: Shubhankar Kuranagatti <shubhankarvk@gmail.com> Link: https://lore.kernel.org/r/20210428165515.o47o5awzdxirxkqi@kewl-virtual-machine Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-31phy: phy-mtk-tphy: Fix some resource leaks in mtk_phy_init()Tiezhu Yang1-0/+2
Use clk_disable_unprepare() in the error path of mtk_phy_init() to fix some resource leaks. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1621420659-15858-1-git-send-email-yangtiezhu@loongson.cn Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-31phy: cadence: Sierra: Fix error return code in cdns_sierra_phy_probe()Wang Wensheng1-0/+1
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: a43f72ae136a ("phy: cadence: Sierra: Change MAX_LANES of Sierra to 16") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Wensheng <wangwensheng4@huawei.com> Link: https://lore.kernel.org/r/20210517015749.127799-1-wangwensheng4@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>