summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-08-25s390/pci: simplify CLP List PCI handlingNiklas Schnelle3-87/+102
Currently clp_get_state() and clp_refresh_fh() awkwardly use the clp_list_pci() callback mechanism to find the entry for a specific FID and update its zdev, respectively return its state. This is both needlessly complex and means we are always going through the entire PCI function list even if the FID has already been found. Instead lets introduce a clp_find_pci() function to find a specific entry and share the CLP List PCI request handling code with clp_list_pci(). With that in place we can also easily make the function handle a simple out parameter instead of directly altering the zdev allowing easier access to the updated function handle by the caller. Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-25s390/pci: handle FH state mismatch only on disableNiklas Schnelle3-6/+16
Instead of always treating CLP_RC_SETPCIFN_ALRDY as success and blindly updating the function handle restrict this special handling to the disable case by moving it into zpci_disable_device() and still treating it as an error while also updating the function handle such that a subsequent zpci_disable_device() succeeds or the caller can ignore the error when aborting is not an option such as for zPCI event 0x304. Also print this occurrence to the log such that an admin can tell why a disable operation returned an error. A mismatch between the state of the underlying device and our view of it can naturally happen when the device suddenly enters the error state but we haven't gotten the error notification yet, it must not happen on enable though. Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-25s390/pci: fix misleading rc in clp_set_pci_fn()Niklas Schnelle2-20/+20
Currently clp_set_pci_fn() always returns 0 as long as the CLP request itself succeeds even if the operation itself returns a response code other than CLP_RC_OK or CLP_RC_SETPCIFN_ALRDY. This is highly misleading because calling code assumes that a zero rc means that the operation was successful. Fix this by returning the response code or cc on failure with the exception of the special handling for CLP_RC_SETPCIFN_ALRDY. Also let's not assume that the returned function handle for CLP_RC_SETPCIFN_ALRDY is 0, we don't need it anyway. Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-25s390/boot: factor out offset_vmlinux_info() functionAlexander Gordeev1-8/+12
Move offsetting all of vmlinux_info fields to a separate function for better readability. Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-25s390/kasan: fix large PMD pages address alignment checkAlexander Gordeev1-21/+20
It is currently possible to initialize a large PMD page when the address is not aligned on page boundary. Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-25s390/zcrypt: remove gratuitious NULL check in .remove() callbacksJulian Wiedmann3-12/+10
As .remove() is only called after a successful .probe() call, we can trust that the drvdata is valid. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-25s390/ap: use the common driver-data pointerJulian Wiedmann6-45/+30
The device struct provides a pointer for driver-private data. Use this in the zcrypt drivers (as vfio_ap already does), and then remove the custom pointer from the AP device structs. As really_probe() will always clear the drvdata pointer on error, we no longer have to do so ourselves. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-25s390/ap: use the common device_driver pointerJulian Wiedmann3-8/+4
The device struct itself already contains a pointer to its driver. Use this consistently, instead of duplicating it. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-25s390/pci: reset zdev->zbus on registration failureNiklas Schnelle1-1/+2
On failure to register a struct zpci_dev with a struct zpci_bus we left a dangling pointer in zdev->zbus. As zpci_create_device() bails if zpci_bus_device_register() fails this is of no consequence but still bad practice. Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-25s390/pci: cleanup resources only if necessaryNiklas Schnelle1-1/+2
It's currently safe to call zpci_cleanup_bus_resources() even if the resources were never created but it makes no sense so check zdev->has_resources before we call zpci_cleanup_bus_resources() in zpci_release_device(). Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Acked-by: Pierre Morel <pmorel@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-25microblaze: move core-y in arch/microblaze/Makefile to arch/microblaze/KbuildMasahiro Yamada2-5/+4
Use obj-y to clean up Makefile. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/r/20210811164518.187497-1-masahiroy@kernel.org Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-08-25Revert "USB: serial: ch341: fix character loss at high transfer rates"Johan Hovold1-1/+0
This reverts commit 3c18e9baee0ef97510dcda78c82285f52626764b. These devices do not appear to send a zero-length packet when the transfer size is a multiple of the bulk-endpoint max-packet size. This means that incoming data may not be processed by the driver until a short packet is received or the receive buffer is full. Revert back to using endpoint-sized receive buffers to avoid stalled reads. Reported-by: Paul Größel <pb.g@gmx.de> Link: https://bugzilla.kernel.org/show_bug.cgi?id=214131 Fixes: 3c18e9baee0e ("USB: serial: ch341: fix character loss at high transfer rates") Cc: stable@vger.kernel.org Cc: Willy Tarreau <w@1wt.eu> Link: https://lore.kernel.org/r/20210824121926.19311-1-johan@kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2021-08-25powerpc/64s: Remove WORT SPR from POWER9/10Nicholas Piggin2-5/+0
This register is not architected and not implemented in POWER9 or 10, it just reads back zeroes for compatibility. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com> Link: https://lore.kernel.org/r/20210811160134.904987-11-npiggin@gmail.com
2021-08-25KVM: PPC: Book3S HV Nested: Reflect guest PMU in-use to L0 when guest SPRs ↵Nicholas Piggin2-0/+27
are live After the L1 saves its PMU SPRs but before loading the L2's PMU SPRs, switch the pmcregs_in_use field in the L1 lppaca to the value advertised by the L2 in its VPA. On the way out of the L2, set it back after saving the L2 PMU registers (if they were in-use). This transfers the PMU liveness indication between the L1 and L2 at the points where the registers are not live. This fixes the nested HV bug for which a workaround was added to the L0 HV by commit 63279eeb7f93a ("KVM: PPC: Book3S HV: Always save guest pmu for guest capable of nesting"), which explains the problem in detail. That workaround is no longer required for guests that include this bug fix. Fixes: 360cae313702 ("KVM: PPC: Book3S HV: Nested guest entry via hypercall") Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com> Link: https://lore.kernel.org/r/20210811160134.904987-10-npiggin@gmail.com
2021-08-25KVM: PPC: Book3S HV Nested: save_hv_return_state does not require trap argumentFabiano Rosas1-3/+3
vcpu is already anargument so vcpu->arch.trap can be used directly. Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210811160134.904987-9-npiggin@gmail.com
2021-08-25KVM: PPC: Book3S HV Nested: Stop forwarding all HFUs to L1Fabiano Rosas1-2/+29
If the nested hypervisor has no access to a facility because it has been disabled by the host, it should also not be able to see the Hypervisor Facility Unavailable that arises from one of its guests trying to access the facility. This patch turns a HFU that happened in L2 into a Hypervisor Emulation Assistance interrupt and forwards it to L1 for handling. The ones that happened because L1 explicitly disabled the facility for L2 are still let through, along with the corresponding Cause bits in the HFSCR. Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com> [np: move handling into kvmppc_handle_nested_exit] Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210811160134.904987-8-npiggin@gmail.com
2021-08-25KVM: PPC: Book3S HV Nested: Make nested HFSCR state accessibleNicholas Piggin4-2/+8
When the L0 runs a nested L2, there are several permutations of HFSCR that can be relevant. The HFSCR that the L1 vcpu L1 requested, the HFSCR that the L1 vcpu may use, and the HFSCR that is actually being used to run the L2. The L1 requested HFSCR is not accessible outside the nested hcall handler, so copy that into a new kvm_nested_guest.hfscr field. The permitted HFSCR is taken from the HFSCR that the L1 runs with, which is also not accessible while the hcall is being made. Move this into a new kvm_vcpu_arch.hfscr_permitted field. These will be used by the next patch to improve facility handling for nested guests, and later by facility demand faulting patches. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210811160134.904987-7-npiggin@gmail.com
2021-08-25KVM: PPC: Book3S HV Nested: Sanitise vcpu registersFabiano Rosas1-48/+46
As one of the arguments of the H_ENTER_NESTED hypercall, the nested hypervisor (L1) prepares a structure containing the values of various hypervisor-privileged registers with which it wants the nested guest (L2) to run. Since the nested HV runs in supervisor mode it needs the host to write to these registers. To stop a nested HV manipulating this mechanism and using a nested guest as a proxy to access a facility that has been made unavailable to it, we have a routine that sanitises the values of the HV registers before copying them into the nested guest's vcpu struct. However, when coming out of the guest the values are copied as they were back into L1 memory, which means that any sanitisation we did during guest entry will be exposed to L1 after H_ENTER_NESTED returns. This patch alters this sanitisation to have effect on the vcpu->arch registers directly before entering and after exiting the guest, leaving the structure that is copied back into L1 unchanged (except when we really want L1 to access the value, e.g the Cause bits of HFSCR). Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Link: https://lore.kernel.org/r/20210811160134.904987-6-npiggin@gmail.com
2021-08-25KVM: PPC: Book3S HV Nested: Fix TM softpatch HFAC interrupt emulationNicholas Piggin3-34/+48
Have the TM softpatch emulation code set up the HFAC interrupt and return -1 in case an instruction was executed with HFSCR bits clear, and have the interrupt exit handler fall through to the HFAC handler. When the L0 is running a nested guest, this ensures the HFAC interrupt is correctly passed up to the L1. The "direct guest" exit handler will turn these into PROGILL program interrupts so functionality in practice will be unchanged. But it's possible an L1 would want to handle these in a different way. Also rearrange the FAC interrupt emulation code to match the HFAC format while here (mainly, adding the FSCR_INTR_CAUSE mask). Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210811160134.904987-5-npiggin@gmail.com
2021-08-25KVM: PPC: Book3S HV P9: Fixes for TM softpatch interrupt NIPNicholas Piggin1-2/+15
The softpatch interrupt sets HSRR0 to the faulting instruction +4, so it should subtract 4 for the faulting instruction address in the case it is a TM softpatch interrupt (the instruction was not executed) and it was not emulated. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210811160134.904987-4-npiggin@gmail.com
2021-08-25KVM: PPC: Book3S HV: Remove TM emulation from POWER7/8 pathNicholas Piggin1-42/+0
TM fake-suspend emulation is only used by POWER9. Remove it from the old code path. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210811160134.904987-3-npiggin@gmail.com
2021-08-25KVM: PPC: Book3S HV: Initialise vcpu MSR with MSR_MENicholas Piggin1-0/+1
It is possible to create a VCPU without setting the MSR before running it, which results in a warning in kvmhv_vcpu_entry_p9() that MSR_ME is not set. This is pretty harmless because the MSR_ME bit is added to HSRR1 before HRFID to guest, and a normal qemu guest doesn't hit it. Initialise the vcpu MSR with MSR_ME set. Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210811160134.904987-2-npiggin@gmail.com
2021-08-25can: mscan: mpc5xxx_can: mpc5xxx_can_probe(): remove useless BUG_ON()Tang Bin1-1/+0
In the function mpc5xxx_can_probe(), the variable 'data' has already been determined in the above code, so the BUG_ON() in this place is useless, remove it. Link: https://lore.kernel.org/r/20210823141033.17876-1-tangbin@cmss.chinamobile.com Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-08-25can: mscan: mpc5xxx_can: mpc5xxx_can_probe(): use of_device_get_match_data ↵Tang Bin1-4/+2
to simplify code Retrieve OF match data, it's better and cleaner to use 'of_device_get_match_data' over 'of_match_device'. Link: https://lore.kernel.org/r/20210823113338.3568-4-tangbin@cmss.chinamobile.com Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-08-25can: rcar_canfd: rcar_canfd_handle_channel_tx(): fix redundant assignmentLad Prabhakar1-1/+1
Fix redundant assignment of 'priv' to itself in rcar_canfd_handle_channel_tx(). Fixes: 76e9353a80e9 ("can: rcar_canfd: Add support for RZ/G2L family") Link: https://lore.kernel.org/r/20210820161449.18169-1-prabhakar.mahadev-lad.rj@bp.renesas.com Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-08-25can: rcar: Kconfig: Add helper dependency on COMPILE_TESTCai Huoqing1-2/+2
it's helpful for complie test in other platform(e.g.X86) Link: https://lore.kernel.org/r/20210825062341.2332-1-caihuoqing@baidu.com Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-08-25configfs: fix a race in configfs_lookup()Sishuai Gong1-3/+4
When configfs_lookup() is executing list_for_each_entry(), it is possible that configfs_dir_lseek() is calling list_del(). Some unfortunate interleavings of them can cause a kernel NULL pointer dereference error Thread 1 Thread 2 //configfs_dir_lseek() //configfs_lookup() list_del(&cursor->s_sibling); list_for_each_entry(sd, ...) Fix this by grabbing configfs_dirent_lock in configfs_lookup() while iterating ->s_children. Signed-off-by: Sishuai Gong <sishuai@purdue.edu> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-08-25configfs: fold configfs_attach_attr into configfs_lookupChristoph Hellwig1-49/+24
This makes it more clear what gets added to the dcache and prepares for an additional locking fix. Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-08-25configfs: simplify the configfs_dirent_is_readyChristoph Hellwig1-3/+1
Return the error directly instead of using a goto. Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-08-25configfs: return -ENAMETOOLONG earlier in configfs_lookupChristoph Hellwig1-2/+3
Just like most other file systems: get the simple checks out of the way first. Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-08-25riscv: explicitly use symbol offsets for VDSOSaleem Abdulrasool5-32/+22
The current implementation of the `__rt_sigaction` reference computed an absolute offset relative to the mapped base of the VDSO. While this can be handled in the medlow model, the medany model cannot handle this as it is meant to be position independent. The current implementation relied on the BFD linker relaxing the PC-relative relocation into an absolute relocation as it was a near-zero address allowing it to be referenced relative to `zero`. We now extract the offsets and create a generated header allowing the build with LLVM and lld to succeed as we no longer depend on the linker rewriting address references near zero. This change was largely modelled after the ARM64 target which does something similar. Signed-off-by: Saleem Abdulrasool <abdulras@google.com> Tested-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-08-25Merge pull request #69 from namjaejeon/cifsd-for-nextSteve French1-1/+2
ksmbd-fixes
2021-08-25MAINTAINERS: ksmbd: add cifs_common directory to ksmbd entryNamjae Jeon1-0/+1
The codes that shared between cifs and ksmbd will move into the cifs_common directory. This patch add it to the ksmbd entry in the MAINTAINERS file. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2021-08-25MAINTAINERS: ksmbd: update my email addressNamjae Jeon1-1/+1
My email address in ksmbd entry will be not available in a few days. Update it to my own kernel.org address. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2021-08-25riscv: Enable Undefined Behavior Sanitizer UBSANJisheng Zhang2-0/+2
Select ARCH_HAS_UBSAN_SANITIZE_ALL in order to allow the user to enable CONFIG_UBSAN_SANITIZE_ALL and instrument the entire kernel for ubsan checks. VDSO is excluded because its build doesn't include the __ubsan_handle_*() functions from lib/ubsan.c, and the VDSO has no sane way to report errors even if it has definitions of these functions. Passed lib/test_ubsan.c test. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-08-25riscv: Keep the riscv Kconfig selects sortedJisheng Zhang1-3/+3
Move three Kconfig selects: ARCH_STACKWALK, ARCH_SUPPORTS_ATOMIC_RMW and ARCH_SUPPORTS_DEBUG_PAGEALLOC to the right place. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-08-25riscv: dts: microchip: Add ethernet0 to the aliases nodeBin Meng1-0/+4
U-Boot expects this alias to be in place in order to fix up the mac address of the ethernet node. Note on the Icicle Kit board, currently only emac1 is enabled so it becomes the 'ethernet0'. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-08-25riscv: dts: microchip: Use 'local-mac-address' for emac1Bin Meng1-1/+1
Per the DT spec, 'local-mac-address' is used to specify MAC address that was assigned to the network device, while 'mac-address' is used to specify the MAC address that was last used by the boot program, and shall be used only if the value differs from 'local-mac-address' property value. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: conor dooley <conor.dooley@microchip.com> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-08-25riscv: Ensure the value of FP registers in the core dump file is up to dateVincent Chen1-0/+4
The value of FP registers in the core dump file comes from the thread.fstate. However, kernel saves the FP registers to the thread.fstate only before scheduling out the process. If no process switch happens during the exception handling process, kernel will not have a chance to save the latest value of FP registers to thread.fstate. It will cause the value of FP registers in the core dump file may be incorrect. To solve this problem, this patch force lets kernel save the FP register into the thread.fstate if the target task_struct equals the current. Signed-off-by: Vincent Chen <vincent.chen@sifive.com> Reviewed-by: Jisheng Zhang <jszhang@kernel.org> Fixes: b8c8a9590e4f ("RISC-V: Add FP register ptrace support for gdb.") Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-08-25powerpc: Use lwarx/ldarx directly instead of PPC_LWARX/LDARX macrosChristophe Leroy5-13/+11
Force the eh flag at 0 on PPC32. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1fc81f07cabebb875b963e295408cc3dd38c8d85.1614674882.git.christophe.leroy@csgroup.eu
2021-08-25powerpc/ptrace: Make user_mode() common to PPC32 and PPC64Christophe Leroy1-4/+0
Today we have: #ifdef __powerpc64__ #define user_mode(regs) ((((regs)->msr) >> MSR_PR_LG) & 0x1) #else #define user_mode(regs) (((regs)->msr & MSR_PR) != 0) #endif With ppc64_defconfig, we get: if (!user_mode(regs)) 14b4: e9 3e 01 08 ld r9,264(r30) 14b8: 71 29 40 00 andi. r9,r9,16384 14bc: 41 82 07 a4 beq 1c60 <.emulate_instruction+0x7d0> If taking the ppc32 definition of user_mode(), the exact same code is generated for ppc64_defconfig. So, only keep one version of user_mode(), preferably the one not using MSR_PR_LG which should be kept internal to reg.h. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/000a28c51808bbd802b505af42d2cb316c2be7d3.1629216000.git.christophe.leroy@csgroup.eu
2021-08-25powerpc/syscalls: Simplify do_mmap2()Christophe Leroy1-11/+4
When shift is nul, operations remain valid so no test needed. And 'ret' is unnecessary. And use IS_ALIGNED() to check alignment, that's more clear. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/373ec500f386374bc5735007df3d3869eac47be1.1624618701.git.christophe.leroy@csgroup.eu
2021-08-25powerpc/ptdump: Convert powerpc to GENERIC_PTDUMPChristophe Leroy6-144/+47
This patch converts powerpc to the generic PTDUMP implementation. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/03166d569526be70214fe9370a7bad219d2f41c8.1625762907.git.christophe.leroy@csgroup.eu
2021-08-25powerpc/ptdump: Reduce level numbers by 1 in note_page() and add p4d levelChristophe Leroy4-14/+21
Do the same as commit f8f0d0b6fa20 ("mm: ptdump: reduce level numbers by 1 in note_page()") and add missing p4d level. This will align powerpc to the users of generic ptdump. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/d76495c574132b197b445a1f133755cca4b912a4.1625762906.git.christophe.leroy@csgroup.eu
2021-08-25powerpc/ptdump: Remove unused 'page_size' parameterChristophe Leroy1-3/+3
note_page_update_state() doesn't use page_size. Remove it. Could also be removed to note_page() but as a following patch will remove all current users of note_page(), just leave it as is for now. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/e2f80d052001155251bfe009c360d0c5d9242c6b.1625762906.git.christophe.leroy@csgroup.eu
2021-08-25powerpc/ptdump: Use DEFINE_SHOW_ATTRIBUTE()Christophe Leroy4-46/+5
Use DEFINE_SHOW_ATTRIBUTE() instead of open coding open() and fops. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/b864a92693ca8413ef0b19f0c12065c212899b6e.1625762905.git.christophe.leroy@csgroup.eu
2021-08-25powerpc: Avoid link stack corruption in misc asm functionsChristophe Leroy5-10/+10
bl;mflr is used at several places to get code position. Use bcl 20,31,+4 instead of bl in order to preserve link stack. See commit c974809a26a1 ("powerpc/vdso: Avoid link stack corruption in __get_datapage()") for details. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/c6eabb4fb6c156f75d56dcbcc6f243e5ac0fba42.1629791763.git.christophe.leroy@csgroup.eu
2021-08-25powerpc/booke: Avoid link stack corruption in several placesChristophe Leroy6-16/+16
Use bcl 20,31,+4 instead of bl in order to preserve link stack. See commit c974809a26a1 ("powerpc/vdso: Avoid link stack corruption in __get_datapage()") for details. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/e9fbc285eceb720e6c0e032ef47fe8b05f669b48.1629791751.git.christophe.leroy@csgroup.eu
2021-08-25powerpc/32: indirect function call use bctrl rather than blrl in ↵Christophe Leroy1-2/+2
ret_from_kernel_thread Copied from commit 89bbe4c798bc ("powerpc/64: indirect function call use bctrl rather than blrl in ret_from_kernel_thread") blrl is not recommended to use as an indirect function call, as it may corrupt the link stack predictor. This is not a performance critical path but this should be fixed for consistency. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/91b1d242525307ceceec7ef6e832bfbacdd4501b.1629436472.git.christophe.leroy@csgroup.eu
2021-08-25scsi: ufs: Fix ufshcd_request_sense_async() for Samsung KLUFG8RHDA-B2D1Adrian Hunter1-7/+29
Samsung KLUFG8RHDA-B2D1 does not clear the unit attention condition if the length is zero. So go back to requesting all the sense data, as it was before patch "scsi: ufs: Request sense data asynchronously". That is simpler than creating and maintaining a quirk for affected devices. Link: https://lore.kernel.org/r/20210824114150.2105-1-adrian.hunter@intel.com Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit v1.2.3 (git 2.39.0) at 2026-11-10 09:05:49 +0300