| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This patch adds support for the ultrasonic ranger srf04 of devantech.
This device is measuring the distance of objects in a range between 1 cm
and 3 meters and a theoretical resolution of 3 mm.
There are two GPIOs used:
- trigger: set as output to the device when the measurement should start
- echo: set by the device when the ultrasonic wave is sent out and reset
when the echo is recognized; this needs to be an interrupt input
The time between setting and resetting the echo pin is the time the
waveform needed for one round trip. This time is recorded in the interrupt
handler.
The distance is calculated in the read function by using the ultrasonic
speed at 20 degrees celsius which is about 343 m/s.
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
This patch adds dt binding for devantech ultrasonic ranger srf04.
The vendor "devantech" was already added to the vendor list with
"[PATCH v4 1/3] iio: distance: srf08: add trivial DT binding"
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Changed symbolic permissions to octal permissions.
Found using checkpatch
Signed-off-by: Derek Robson <robsonde@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Signed-off-by: Matt Ranostay <matt@ranostay.consulting>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
This replaces the last occurrence of the deprecated <asm/uaccess.h> include
in the staging directory with the newer <linux/uaccess.h>
Signed-off-by: Seraphime Kirkovski <kirkseraph@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The problem is that we copy hdr.ioc_len, we verify it, then we copy it
again without checking to see if it has changed in between the two
copies.
This could result in an information leak.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This is a patch to fix "WARNING: line over 80 characters" found by
checkpatch.pl in vvp_page.c.
Signed-off-by: Zhengyi Shen <shenzhengyi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The reason for __REQ_LAYOUT_USER__ was to expose a
section of code in layout.c to userland for a utility
similar to wireshark. This was done before wireshark
existed but now that it does we no longer need to do
this type of hack. This also reduces lustre_acl.h to
strictly a kernel header now.
Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8945
Reviewed-on: https://review.whamcloud.com/24396
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The use of 64 bit time introduces an expensive 64 bit
division operation. Since the time lapse being calculated
in osc_cache_too_much will never be more than seventy years
we can cast the time lapse to an long and perform a normal
32 bit divison operation instead.
Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8835
Reviewed-on: https://review.whamcloud.com/23814
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If an application attempts to remove millions of files in a
single directory it will fail. This failure was tracked down to
the nlink < 2 check in lmv_revalidate_slaves, because after
nlink reaches to maximum value of LDISKFS_LINK_MAX (65000),
the nlink broadcast back from the server will be reported as
one. The return value of 1 is not invalid so lets remove
the check.
Signed-off-by: wang di <di.wang@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6984
Reviewed-on: http://review.whamcloud.com/16490
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Jian Yu <jian.yu@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The function generic_file_read_iter() does not check EOF
before invoke direct_IO callback. So we have to check it
ourselves.
Signed-off-by: Yang Sheng <yang.sheng@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8969
Reviewed-on: https://review.whamcloud.com/24552
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Building the lustre client with W=1 reports the following
error:
obdclass/obd_mount.c: In function lmd_parse:
obdclass/obd_mount.c:880: warning: variable set but not used
The solution is to move s3 to the inner loop
where it is only used.
Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8378
Reviewed-on: https://review.whamcloud.com/23820
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch makes no functional changes. Struct initializers in the
fid directory that use C89 or GCC-only syntax are updated to C99
syntax.
The C99 syntax prevents incorrect initialization if values are
accidently placed in the wrong position, allows changes in the struct
definition, and clears any members that are not given an explicit
value.
The following struct initializers have been updated:
lustre/fid/fid_lib.c:
const struct lu_seq_range LUSTRE_SEQ_SPACE_RANGE
const struct lu_seq_range LUSTRE_SEQ_ZERO_RANGE
lustre/fid/lproc_fid.c:
struct lprocfs_vars seq_client_debugfs_list
Signed-off-by: Steve Guminski <stephenx.guminski@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6210
Reviewed-on: https://review.whamcloud.com/23789
Reviewed-by: Nathaniel Clark <nathaniel.l.clark@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The replay cursor should be updated properly when close happened
during replay, otherwise, ptlrpc_replay_next() could run into a
dead loop due to an invalid replay cursor:
- replay cursor is moved to an open request during replay;
- application close that open file, so the rq_replay of the open
request is cleared;
- ptlrpc_replay_next() calls ptlrpc_free_committed() to free
committed/closed requests, the open request is removed from
the committed list, so the replay cursor is changed to an
empty list_head now. The open request won't be freed now since
it's still held by the pending close request;
- ptlrpc_replay_next() continue to move the replay cursor to
next and run into a dead loop at the end;
Another change in this patch is to remove the out of date comments
in ptlrpc_replay_next() and cover the whole process of finding
replay request within imp_lock, because:
1. With two separated replay lists and replay cursor introduced,
finding replay request won't take much time as before, it's
not necessary to do this "lock -> unlock -> lock -> unlock"
trick anymore;
2. Nowadays there are various kind of non-replay requests are
allowed during recovery, so ptlrpc_free_committed() may run in
parallel to remove an open request while ptlrpc_replay_next()
is iterating the open requests list;
Signed-off-by: Niu Yawei <yawei.niu@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8765
Reviewed-on: https://review.whamcloud.com/23418
Reviewed-by: Yang Sheng <yang.sheng@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Update max_ptlrpcds module parameter descriptions to let
users know its obsolete. Change cpt to CPT for the module
parameter description ptlrpcd_per_cpt_max so it matches
documentation.
Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8890
Reviewed-on: https://review.whamcloud.com/24065
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Environment for request interpreters is not used any more.
Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8887
Reviewed-on: https://review.whamcloud.com/24061
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove the inline function socklnd_init_msg.
Its only used by the kernel code so no point
keeping it in an UAPI header.
Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/18506
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ksocklnd reaper thread always tries to close the connection for the
first timedout zero-copy TX. This is wrong if this connection is
already being closed, because the reaper will see the same TX again
and again and cannot find out other timedout zero-copy TXs and close
connections for them.
Signed-off-by: Liang Zhen <liang.zhen@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8867
Reviewed-on: https://review.whamcloud.com/23973
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In mdc_close() if ptlrpc_request_pack() fails then set req to NULL so
that an already freed request is not returned in *request.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8811
Reviewed-on: https://review.whamcloud.com/23843
Reviewed-by: Patrick Farrell <paf@cray.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
An earlier commit accidentally changed handling of IT_OPEN,
making it take the MDS_INODELOCK_UPDATE bits lock instead of
MDS_INODELOCK_LOOKUP. This does not cause any known bugs.
Signed-off-by: Patrick Farrell <paf@cray.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8842
Reviewed-on: https://review.whamcloud.com/23797
Fixes: 70a251f68dea ("staging: lustre: obd: decruft md_enqueue() and md_intent_lock()"
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch makes no functional changes. Struct initializers in the
libcfs directory that use C89 or GCC-only syntax are updated to C99
syntax.
The C99 syntax prevents incorrect initialization if values are
accidently placed in the wrong position, allows changes in the struct
definition, and clears any members that are not given an explicit
value.
The following struct initializers have been updated:
libcfs/include/libcfs/libcfs_crypto.h:
static struct cfs_crypto_hash_type hash_types[]
Signed-off-by: Steve Guminski <stephenx.guminski@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6210
Reviewed-on: https://review.whamcloud.com/23332
Reviewed-by: Frank Zago <fzago@cray.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Nathaniel Clark <nathaniel.l.clark@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Don't treat unability to set CPU partition affinity as error.
Improve those warning messages.
Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8703
Reviewed-on: https://review.whamcloud.com/23307
Reviewed-by: Patrick Farrell <paf@cray.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
None of the obd_notify() handlers listen for the OBD_NOTIFY_CREATE
event, so remove it and its sole use in lov_add_target().
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8403
Reviewed-on: https://review.whamcloud.com/21420
Reviewed-by: Ben Evans <bevans@cray.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ptlrpc_import_delay_req() refuses to delay blocking asts when import
is not in LUSTRE_IMP_FULL yet. That leads to client eviction assuming
that it failed to respond.
Allow delays for blocking asts being resent.
Signed-off-by: Vladimir Saveliev <vladimir.saveliev@seagate.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8351
Seagate-bug-id: MRP-3500
Reviewed-on: https://review.whamcloud.com/21065
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The patch updates the prototype in osc_internal.h to match the
enums used in the declaration.
The osc_match_base declaration in lustre/osc/osc_request.c uses
enums for stricter checking on the type and mode parameters:
int osc_match_base(struct obd_export *exp,
...
--> enum ldlm_type type,
union ldlm_policy_data *policy,
--> enum ldlm_mode mode,
... int unref)
The prototype in lustre/osc/osc_internal.h instead used unsigned ints:
int osc_match_base(struct obd_export *exp,
...
--> __u32 type,
union ldlm_policy_data *policy,
--> __u32 mode,
... int unref);
Signed-off-by: Steve Guminski <stephenx.guminski@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8189
Reviewed-on: http://review.whamcloud.com/23167
Reviewed-by: Frank Zago <fzago@cray.com>
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
reply_out_callback() should call ptlrpc_schedule_difficult_reply()
to finalize the rs if it's already not on uncommitted list, otherwise,
the rs and the export held by rs could be leaked:
- target_send_reply() sends a difficult reply before the transaction
committed, the reply is linked to scp_rep_active;
- export gets disconnected by umount or whatever reason,
server_disconnect_export() is called to complete all outstanding
replies, which will calls into ptlrpc_handle_rs() to dispose of
the rs, so the rs is removed from the uncommitted list and
LNetMDUnlink() is called to unlink the reply buffer and generate
an unlink event;
- reply_out_callback() is called to process above unlink event,
ptlrpc_schedule_difficult_reply() is supposed to be called to
dispose of the rs finally. However, it could be skipped because of
following flawed code snippet:
if (!rs->rs_no_ack ||
rs->rs_transno <= rs->rs_export->exp_obd->obd_last_committed)
ptlrpc_schedule_difficult_reply(rs);
The intention of above code is: if rs_no_ack is true (COS enabled),
and transaction is not committed, we should rely on commit callback
to release the rs. However, it overlooked the situation that rs
could have been removed from the uncommitted list by disconnecting
export.
Signed-off-by: Niu Yawei <yawei.niu@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7903
Reviewed-on: http://review.whamcloud.com/22696
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace the ulong_ptr_t and long_ptr_t with standard
kernel types.
Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6245
Reviewed-on: http://review.whamcloud.com/20204
Reviewed-by: Frank Zago <fzago@cray.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There exists timing race between umount and other
thread which will increment the reference count on
mnt e.g. getattr. If umount thread lose the race
then umount fails with EBUSY error. To avoid this
timed wait is added so that umount thread will wait
for user to decrement the mnt reference count.
Signed-off-by: Rahul Deshmukh <rahul.deshmukh@seagate.com>
Signed-off-by: Lokesh Nagappa Jaliminche <lokesh.jaliminche@seagate.com>
Signed-off-by: Jian Yu <jian.yu@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-1882
Seagate-bug-id: MRP-1192
Reviewed-on: http://review.whamcloud.com/20061
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
So that debug log only contains relevant messages for debugging
purpose.
Signed-off-by: Bobi Jam <bobijam.xu@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8413
Reviewed-on: http://review.whamcloud.com/22753
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In the case of interval_tree.h only interval_set()
uses LASSERT which is removed in this patch and
interval_set() instead reports a real error. The
header libcfs.h for interval_tree.h is not needed
anymore so we can just use the standard linux
kernel headers instead.h
Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6401
Reviewed-on: https://review.whamcloud.com/22522
Reviewed-on: https://review.whamcloud.com/24323
Reviewed-by: Frank Zago <fzago@cray.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
lov_device::ld_target[ost_idx] could be NULL if the OST target is
not filled in lov_device::ld_lov::lov_tgt_desc[ost_idx] yet.
Signed-off-by: Bobi Jam <bobijam.xu@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8018
Reviewed-on: http://review.whamcloud.com/21411
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Change default value of CPT pattern and make it match NUMA topology
Signed-off-by: Liang Zhen <liang.zhen@intel.com>
Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5050
Reviewed-on: http://review.whamcloud.com/22377
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Olaf Weber <olaf@sgi.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The function cfs_cpt_table_create_pattern() alters the string
passed to it. Currently we are passing in the module parameter
string cpu_pattern which is incorrect. Instead lets duplicate
the module parameter string and pass that to the function
cfs_cpt_table_create_pattern().
Signed-off-by: Liang Zhen <liang.zhen@intel.com>
Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5050
Reviewed-on: http://review.whamcloud.com/22377
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Olaf Weber <olaf@sgi.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
OSC has to make sure that it won't issue write RPCs with too many
chunks otherwise it will casue ZFS to create transactions much
bigger than DMU_MAX_ACCESS in size, which will end up with write
failure.
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8135
Reviewed-on: http://review.whamcloud.com/22369
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8632
Reviewed-on: http://review.whamcloud.com/22654
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Patrick Farrell <paf@cray.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Sync write should update m/ctime promptly, otherwise, stale m/ctime
could be updated on the OST object by the sync write RPC.
Signed-off-by: Niu Yawei <yawei.niu@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7310
Reviewed-on: http://review.whamcloud.com/21063
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The 'fld_read_server' uses 'RMF_GENERIC_DATA' to hold the 'FLD_QUERY'
RPC reply that is composed of 'struct lu_seq_range_array'. But there
is not registered swabber function for 'RMF_GENERIC_DATA'. So the RPC
peers need to handle the RPC reply with fixed little-endian format.
In theory, we can define new structure with some swabber registered
to handle the 'FLD_QUERY' RPC reply result automatically. But from
the implementation view, it is not easy to be done within current
'struct req_msg_field' framework. Because the sequence range array
in the RPC reply is not fixed length, instead, its length depends
on 'lu_seq_range' count, that is unknown when prepare the RPC buffer.
Generally, for such flexible length RPC usage, there will be a field
in the RPC layout to indicate the data length. But for the 'FLD_READ'
RPC, we have no way to do that unless we add new length filed that
will broken the on-wire RPC protocol and cause interoperability
trouble with old peer.
Signed-off-by: Fan Yong <fan.yong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6284
Reviewed-on: http://review.whamcloud.com/22309
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Setting extended attributes permissions are properly checked with and
without ACLs. In user.* namespace, only regular files and directories
can have extended attributes. For sticky directories, only the owner
and privileged user can write attributes.
Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-1482
Reviewed-on: http://review.whamcloud.com/21496
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Whole policy structure was zeroed twice. Once during enqueue
and second time during resend or replay. Policy structure
should be initialized with default values only in ldlm_lock_new().
Signed-off-by: Andriy Skulysh <andriy.skulysh@seagate.com>
Signed-off-by: Ben Evans <bevans@cray.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8349
Seagate-bug-id: MRP-2536, MRP-2909
Reviewed-on: http://review.whamcloud.com/21061
Reviewed-by: Alexander Boyko <alexander.boyko@seagate.com>
Reviewed-by: Vitaly Fertman <vitaly.fertman@seagate.com>
Reviewed-by: Mike Pershin <mike.pershin@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Originally, the logic of handling config_llog_data::cld_refcount
is some confusing, it may cause the cld_refcount to be leaked or
trigger "LASSERT(atomic_read(&cld->cld_refcount) > 0);" when put
the reference. This patch clean related logic as following:
1) When the 'cld' is created, its reference is set as 1.
2) No need additional reference when add the 'cld' into the list
'config_llog_list'.
3) Inrease 'cld_refcount' when set lock data after mgc_enqueue()
done successfully by mgc_process_log().
4) When mgc_requeue_thread() traversals the 'config_llog_list',
it needs to take additional reference on each 'cld' to avoid
being freed during subsequent processing. The reference also
prevents the 'cld' to be dropped from the 'config_llog_list',
then the mgc_requeue_thread() can safely locate next 'cld',
and then decrease the 'cld_refcount' for previous one.
5) mgc_blocking_ast() will drop the reference of 'cld_refcount'
that is taken in mgc_process_log().
6) The others need to call config_log_find() to find the 'cld'
if want to access related config log data. That will increase
the 'cld_refcount' to avoid being freed during accessing. The
sponsor needs to call config_log_put() after using the 'cld'.
7) Other confused or redundant logic are dropped.
On the other hand, the patch also enhances the protection for
'config_llog_data' flags, such as 'cld_stopping'/'cld_lostlock'
as following.
a) Use 'config_list_lock' (spinlock) to handle the possible
parallel accessing of these flags among mgc_requeue_thread()
and others config llog data visitors, such as mount/umount,
blocking_ast, and so on.
b) Use 'config_llog_data::cld_lock' (mutex) to pretect other
parallel accessing of these flags among kinds of blockable
operations, such as mount, umount, and blocking ast.
The 'config_llog_data::cld_lock' is also used for protecting
the sub-cld members, such as 'cld_sptlrpc'/'cld_params', and
so on.
Signed-off-by: Fan Yong <fan.yong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8408
Reviewed-on: http://review.whamcloud.com/21616
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: Hongchao Zhang <hongchao.zhang@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
By forcing creates to always go via lookup we lose some
important caching benefits too.
Instead let's trust creates with positive cached entries.
Then we have 3 possible outcomes:
1. Negative dentry - we go via atomic_open and do the create
by name there.
2. Positive dentry, no contention - we just go straight to
ll_intent_file_open and open by fid.
3. positive dentry, contention - by the time we reach the server,
the inode is gone. We get ENOENT which is unacceptable to return
from create. But since we know it's a create, we substitute it
with ESTALE and VFS retries again with LOOKUP_REVAL set, we catch
that in revalidate and force a lookup (same path as before this
patch).
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8371
Reviewed-on: http://review.whamcloud.com/21168
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Current client doesn't check permission before updating filesystem
default stripe on MGS, which isn't secure and obvious.
Since we setattr on MDS first, and then set default stripe on MGS,
we can just return error upon setattr failure.
Now filesystem default stripe is stored in ROOT in MDT, so saving
it in system config is for compatibility with old servers, this
will be removed in the future.
Signed-off-by: Lai Siyao <lai.siyao@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8454
Reviewed-on: http://review.whamcloud.com/21612
Reviewed-on: http://review.whamcloud.com/22580
Reviewed-by: Jian Yu <jian.yu@intel.com>
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
These #if 0 blocks have been in place for years. Assume
they are not used and remove them
Signed-off-by: Ben Evans <bevans@cray.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8058
Reviewed-on: http://review.whamcloud.com/20416
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Frank Zago <fzago@cray.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove the unused lmv.*.placement parameter along with supporting
functions and struct members.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7674
Reviewed-on: http://review.whamcloud.com/18019
Reviewed-by: Ben Evans <bevans@cray.com>
Reviewed-by: Frank Zago <fzago@cray.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove obsolete comments about the behavior of ll_unlink()
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8003
Reviewed-on: http://review.whamcloud.com/19881
Reviewed-by: Andrew Perepechko <andrew.perepechko@seagate.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Change the order of checks for inactive OSCs in lov_prep_statfs_set()
so that administratively disabled OSTs do not generate any output in
"lfs df" at all, to avoid needlessly cluttering the output.
Enable the lazystatfs mount option by default, so that "df" does not
hang when an OST is temporarily offline.
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7759
Reviewed-on: http://review.whamcloud.com/19195
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch resolves IO vs eviction race.
After eviction failed export stayed at stale list,
a client had IO processing and reconnected during it.
A client sent brw rpc with last lock cookie and new connection.
The lock with failed export was found and assert was happened.
(ost_handler.c:1812:ost_prolong_lock_one())
ASSERTION( lock->l_export == opd->opd_exp ) failed:
1. Skip the lock at ldlm_handle2lock if lock export failed.
2. Validation of lock for IO was added at hpreq_check(). The lock
searching is based on granted interval tree. If server doesn`t
have a valid lock, it reply to client with ESTALE.
Signed-off-by: Alexander Boyko <alexander.boyko@seagate.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7702
Seagate-bug-id: MRP-2787
Reviewed-on: http://review.whamcloud.com/18120
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Vitaly Fertman <vitaly.fertman@seagate.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
First of all, this is expensive procedure including a global
mutex and per-bucket spinlocks. also, all the threads observed
exceed will be calling lu_site_purge() and essentially serialized
on that. instead we can let other threads to skip the whole
procedure.
Signed-off-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7896
Reviewed-on: http://review.whamcloud.com/19082
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Mike Pershin <mike.pershin@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ignore_layout can be set for operations that layout won't be changed,
typically page operations. Ignoring layout change in group lock
request will confuse layout change code at LOV layer and hit
assertion.
Signed-off-by: Henri Doreau <henri.doreau@cea.fr>
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: Bobi Jam <bobijam.xu@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2766
Reviewed-on: http://review.whamcloud.com/6828
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The function hai_dump_data_field will do a stack buffer
overrun when cat'ing /sys/fs/lustre/.../hsm/actions if an action has
some data in it.
hai_dump_data_field uses snprintf. But there is no check for
truncation, and the value returned by snprintf is used as-is. The
coordinator code calls hai_dump_data_field with 12 bytes in the
buffer. The 6th byte of data is printed incompletely to make room for
the terminating NUL. However snprintf still returns 2, so when
hai_dump_data_field writes the final NUL, it does it outside the
reserved buffer, in the 13th byte of the buffer. This stack buffer
overrun hangs my VM.
Fix by checking that there is enough room for the next 2 characters
plus the NUL terminator. Don't print half bytes. Change the format to
02X instead of .2X, which makes more sense.
Signed-off-by: frank zago <fzago@cray.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8171
Reviewed-on: http://review.whamcloud.com/20338
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Jean-Baptiste Riaux <riaux.jb@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This issue is found by smatch; has been reported as-
Unchecked usage of potential ERR_PTR result in lmv_hsm_req_count
and lmv_hsm_req_build. Added ERR_PTR in both functions and also
return value check added.
Signed-off-by: Ulka Vaze <ulka.vaze@yahoo.in>
Signed-off-by: Aditya Pandit <panditadityashreesh@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6523
Reviewed-on: http://review.whamcloud.com/14918
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
