summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-05-31block, bfq: prevent soft_rt_next_start from being stuck at infinityDavide Sapienza1-27/+2
BFQ can deem a bfq_queue as soft real-time only if the queue - periodically becomes completely idle, i.e., empty and with no still-outstanding I/O request; - after becoming idle, gets new I/O only after a special reference time soft_rt_next_start. In this respect, after commit "block, bfq: consider also past I/O in soft real-time detection", the value of soft_rt_next_start can never decrease. This causes a problem with the following special updating case for soft_rt_next_start: to prevent queues that are not completely idle to be wrongly detected as soft real-time (when they become non-empty again), soft_rt_next_start is temporarily set to infinity for empty queues with still outstanding I/O requests. But, if such an update is actually performed, then, because of the above commit, soft_rt_next_start will be stuck at infinity forever, and the queue will have no more chance to be considered soft real-time. On slow systems, this problem does cause actual soft real-time applications to be occasionally not detected as such. This commit addresses this issue by eliminating the pushing of soft_rt_next_start to infinity, and by changing the way non-empty queues are prevented from being wrongly detected as soft real-time. Simply, a queue that becomes non-empty again can now be detected as soft real-time only if it has no outstanding I/O request. Signed-off-by: Davide Sapienza <sapienza.dav@gmail.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-31block, bfq: increase weight-raising duration for interactive appsDavide Sapienza1-11/+15
The maximum possible duration of the weight-raising period for interactive applications is limited to 13 seconds, as this is the time needed to load the largest application that we considered when tuning weight raising. Unfortunately, in such an evaluation, we did not consider the case of very slow virtual machines. For example, on a QEMU/KVM virtual machine - running in a slow PC; - with a virtual disk stacked on a slow low-end 5400rpm HDD; - serving a heavy I/O workload, such as the sequential reading of several files; mplayer takes 23 seconds to start, if constantly weight-raised. To address this issue, this commit conservatively sets the upper limit for weight-raising duration to 25 seconds. Signed-off-by: Davide Sapienza <sapienza.dav@gmail.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-31block, bfq: remove slow-system classPaolo Valente2-105/+46
BFQ computes the duration of weight raising for interactive applications automatically, using some reference parameters. In particular, BFQ uses the best durations (see comments in the code for how these durations have been assessed) for two classes of systems: slow and fast ones. Examples of slow systems are old phones or systems using micro HDDs. Fast systems are all the remaining ones. Using these parameters, BFQ computes the actual duration of the weight raising, for the system at hand, as a function of the relative speed of the system w.r.t. the speed of a reference system, belonging to the same class of systems as the system at hand. This slow vs fast differentiation proved to be useful in the past, but happens to have little meaning with current hardware. Even worse, it does cause problems in virtual systems, where the speed of the system can vary frequently, and so widely to just confuse the class-detection mechanism, and, as we have verified experimentally, to cause BFQ to compute non-sensical weight-raising durations. This commit addresses this issue by removing the slow class and the class-detection mechanism. Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-31block, bfq: add description of weight-raising heuristicsPaolo Valente1-24/+56
A description of how weight raising works is missing in BFQ sources. In addition, the code for handling weight raising is scattered across a few functions. This makes it rather hard to understand the mechanism and its rationale. This commits adds such a description at the beginning of the main source file. Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-31block, bfq: remove the removal of 'next' rq in bfq_requests_mergedFilippo Muzzini1-7/+0
Since bfq_finish_request() is always called on the request 'next', after bfq_requests_merged() is finished, and bfq_finish_request() removes 'next' from its bfq_queue if needed, it isn't necessary to do such a removal in advance in bfq_merged_requests(). This commit removes such a useless 'next' removal. Signed-off-by: Filippo Muzzini <filippo.muzzini@outlook.it> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-31block, bfq: remove wrong check in bfq_requests_mergedPaolo Valente1-6/+20
The request rq passed to the function bfq_requests_merged is always in a bfq_queue, so the check !RB_EMPTY_NODE(&rq->rb_node) at the beginning of bfq_requests_merged always succeeds, and the control flow systematically skips to the end of the function. This implies that the body of the function is never executed, i.e., the repositioning of rq is never performed. On the opposite end, a control is missing in the body of the function: 'next' must be removed only if it is inside a bfq_queue. This commit removes the wrong check on rq, and adds the missing check on 'next'. In addition, this commit adds comments on bfq_requests_merged. Signed-off-by: Filippo Muzzini <filippo.muzzini@outlook.it> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-31block, bfq: remove wrong lock in bfq_requests_mergedFilippo Muzzini1-2/+0
In bfq_requests_merged(), there is a deadlock because the lock on bfqq->bfqd->lock is held by the calling function, but the code of this function tries to grab the lock again. This deadlock is currently hidden by another bug (fixed by next commit for this source file), which causes the body of bfq_requests_merged() to be never executed. This commit removes the deadlock by removing the lock/unlock pair. Signed-off-by: Filippo Muzzini <filippo.muzzini@outlook.it> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-31Merge tag 'platform-drivers-x86-v4.17-4' of ↵Linus Torvalds1-10/+13
git://git.infradead.org/linux-platform-drivers-x86 Pull x86 platform driver fix from Andy Shevchenko: "Fix NULL pointer dereference in asus-wmi on rfkill cleanup. The effective change is just one new condition - two lines of code. But it required moving one static helper function, which is why the diff looks a bit bigger" * tag 'platform-drivers-x86-v4.17-4' of git://git.infradead.org/linux-platform-drivers-x86: platform/x86: asus-wmi: Fix NULL pointer dereference
2018-05-31platform/x86: asus-wmi: Fix NULL pointer dereferenceJoão Paulo Rechi Vita1-10/+13
Do not perform the rfkill cleanup routine when (asus->driver->wlan_ctrl_by_user && ashs_present()) is true, since nothing is registered with the rfkill subsystem in that case. Doing so leads to the following kernel NULL pointer dereference: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff816c7348>] __mutex_lock_slowpath+0x98/0x120 PGD 1a3aa8067 PUD 1a3b3d067 PMD 0 Oops: 0002 [#1] PREEMPT SMP Modules linked in: bnep ccm binfmt_misc uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core hid_a4tech videodev x86_pkg_temp_thermal intel_powerclamp coretemp ath3k btusb btrtl btintel bluetooth kvm_intel snd_hda_codec_hdmi kvm snd_hda_codec_realtek snd_hda_codec_generic irqbypass crc32c_intel arc4 i915 snd_hda_intel snd_hda_codec ath9k ath9k_common ath9k_hw ath i2c_algo_bit snd_hwdep mac80211 ghash_clmulni_intel snd_hda_core snd_pcm snd_timer cfg80211 ehci_pci xhci_pci drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm xhci_hcd ehci_hcd asus_nb_wmi(-) asus_wmi sparse_keymap r8169 rfkill mxm_wmi serio_raw snd mii mei_me lpc_ich i2c_i801 video soundcore mei i2c_smbus wmi i2c_core mfd_core CPU: 3 PID: 3275 Comm: modprobe Not tainted 4.9.34-gentoo #34 Hardware name: ASUSTeK COMPUTER INC. K56CM/K56CM, BIOS K56CM.206 08/21/2012 task: ffff8801a639ba00 task.stack: ffffc900014cc000 RIP: 0010:[<ffffffff816c7348>] [<ffffffff816c7348>] __mutex_lock_slowpath+0x98/0x120 RSP: 0018:ffffc900014cfce0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8801a54315b0 RCX: 00000000c0000100 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff8801a54315b4 RBP: ffffc900014cfd30 R08: 0000000000000000 R09: 0000000000000002 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801a54315b4 R13: ffff8801a639ba00 R14: 00000000ffffffff R15: ffff8801a54315b8 FS: 00007faa254fb700(0000) GS:ffff8801aef80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001a3b1b000 CR4: 00000000001406e0 Stack: ffff8801a54315b8 0000000000000000 ffffffff814733ae ffffc900014cfd28 ffffffff8146a28c ffff8801a54315b0 0000000000000000 ffff8801a54315b0 ffff8801a66f3820 0000000000000000 ffffc900014cfd48 ffffffff816c73e7 Call Trace: [<ffffffff814733ae>] ? acpi_ut_release_mutex+0x5d/0x61 [<ffffffff8146a28c>] ? acpi_ns_get_node+0x49/0x52 [<ffffffff816c73e7>] mutex_lock+0x17/0x30 [<ffffffffa00a3bb4>] asus_rfkill_hotplug+0x24/0x1a0 [asus_wmi] [<ffffffffa00a4421>] asus_wmi_rfkill_exit+0x61/0x150 [asus_wmi] [<ffffffffa00a49f1>] asus_wmi_remove+0x61/0xb0 [asus_wmi] [<ffffffff814a5128>] platform_drv_remove+0x28/0x40 [<ffffffff814a2901>] __device_release_driver+0xa1/0x160 [<ffffffff814a29e3>] device_release_driver+0x23/0x30 [<ffffffff814a1ffd>] bus_remove_device+0xfd/0x170 [<ffffffff8149e5a9>] device_del+0x139/0x270 [<ffffffff814a5028>] platform_device_del+0x28/0x90 [<ffffffff814a50a2>] platform_device_unregister+0x12/0x30 [<ffffffffa00a4209>] asus_wmi_unregister_driver+0x19/0x30 [asus_wmi] [<ffffffffa00da0ea>] asus_nb_wmi_exit+0x10/0xf26 [asus_nb_wmi] [<ffffffff8110c692>] SyS_delete_module+0x192/0x270 [<ffffffff810022b2>] ? exit_to_usermode_loop+0x92/0xa0 [<ffffffff816ca560>] entry_SYSCALL_64_fastpath+0x13/0x94 Code: e8 5e 30 00 00 8b 03 83 f8 01 0f 84 93 00 00 00 48 8b 43 10 4c 8d 7b 08 48 89 63 10 41 be ff ff ff ff 4c 89 3c 24 48 89 44 24 08 <48> 89 20 4c 89 6c 24 10 eb 1d 4c 89 e7 49 c7 45 08 02 00 00 00 RIP [<ffffffff816c7348>] __mutex_lock_slowpath+0x98/0x120 RSP <ffffc900014cfce0> CR2: 0000000000000000 ---[ end trace 8d484233fa7cb512 ]--- note: modprobe[3275] exited with preempt_count 2 https://bugzilla.kernel.org/show_bug.cgi?id=196467 Reported-by: red.f0xyz@gmail.com Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-05-31Merge tag 'perf-urgent-for-mingo-4.17-20180531' of ↵Ingo Molnar9-21/+185
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: - Fix 'perf test Session topology' segfault on s390 (Thomas Richter) - Fix NULL return handling in bpf__prepare_load() (YueHaibing) - Fix indexing on Coresight ETM packet queue decoder (Mathieu Poirier) - Fix perf.data format description of NRCPUS header (Arnaldo Carvalho de Melo) - Update perf.data documentation section on cpu topology - Handle uncore event aliases in small groups properly (Kan Liang) - Add missing perf_sample.addr into python sample dictionary (Leo Yan) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-05-31sched/headers: Fix typoDavidlohr Bueso1-1/+1
I cannot spell 'throttling'. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180530224940.17839-1-dave@stgolabs.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-05-31sched/deadline: Fix missing clock updateJuri Lelli1-3/+3
A missing clock update is causing the following warning: rq->clock_update_flags < RQCF_ACT_SKIP WARNING: CPU: 10 PID: 0 at kernel/sched/sched.h:963 inactive_task_timer+0x5d6/0x720 Call Trace: <IRQ> __hrtimer_run_queues+0x10f/0x530 hrtimer_interrupt+0xe5/0x240 smp_apic_timer_interrupt+0x79/0x2b0 apic_timer_interrupt+0xf/0x20 </IRQ> do_idle+0x203/0x280 cpu_startup_entry+0x6f/0x80 start_secondary+0x1b0/0x200 secondary_startup_64+0xa5/0xb0 hardirqs last enabled at (793919): [<ffffffffa27c5f6e>] cpuidle_enter_state+0x9e/0x360 hardirqs last disabled at (793920): [<ffffffffa2a0096e>] interrupt_entry+0xce/0xe0 softirqs last enabled at (793922): [<ffffffffa20bef78>] irq_enter+0x68/0x70 softirqs last disabled at (793921): [<ffffffffa20bef5d>] irq_enter+0x4d/0x70 This happens because inactive_task_timer() calls sub_running_bw() (if TASK_DEAD and non_contending) that might trigger a schedutil update, which might access the clock. Clock is however currently updated only later in inactive_task_timer() function. Fix the problem by updating the clock right after task_rq_lock(). Reported-by: kernel test robot <xiaolong.ye@intel.com> Signed-off-by: Juri Lelli <juri.lelli@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Claudio Scordino <claudio@evidence.eu.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luca Abeni <luca.abeni@santannapisa.it> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180530160809.9074-1-juri.lelli@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-05-31sched/core: Require cpu_active() in select_task_rq(), for user tasksPaul Burton1-2/+1
select_task_rq() is used in a few paths to select the CPU upon which a thread should be run - for example it is used by try_to_wake_up() & by fork or exec balancing. As-is it allows use of any online CPU that is present in the task's cpus_allowed mask. This presents a problem because there is a period whilst CPUs are brought online where a CPU is marked online, but is not yet fully initialized - ie. the period where CPUHP_AP_ONLINE_IDLE <= state < CPUHP_ONLINE. Usually we don't run any user tasks during this window, but there are corner cases where this can happen. An example observed is: - Some user task A, running on CPU X, forks to create task B. - sched_fork() calls __set_task_cpu() with cpu=X, setting task B's task_struct::cpu field to X. - CPU X is offlined. - Task A, currently somewhere between the __set_task_cpu() in copy_process() and the call to wake_up_new_task(), is migrated to CPU Y by migrate_tasks() when CPU X is offlined. - CPU X is onlined, but still in the CPUHP_AP_ONLINE_IDLE state. The scheduler is now active on CPU X, but there are no user tasks on the runqueue. - Task A runs on CPU Y & reaches wake_up_new_task(). This calls select_task_rq() with cpu=X, taken from task B's task_struct, and select_task_rq() allows CPU X to be returned. - Task A enqueues task B on CPU X's runqueue, via activate_task() & enqueue_task(). - CPU X now has a user task on its runqueue before it has reached the CPUHP_ONLINE state. In most cases, the user tasks that schedule on the newly onlined CPU have no idea that anything went wrong, but one case observed to be problematic is if the task goes on to invoke the sched_setaffinity syscall. The newly onlined CPU reaches the CPUHP_AP_ONLINE_IDLE state before the CPU that brought it online calls stop_machine_unpark(). This means that for a portion of the window of time between CPUHP_AP_ONLINE_IDLE & CPUHP_ONLINE the newly onlined CPU's struct cpu_stopper has its enabled field set to false. If a user thread is executed on the CPU during this window and it invokes sched_setaffinity with a CPU mask that does not include the CPU it's running on, then when __set_cpus_allowed_ptr() calls stop_one_cpu() intending to invoke migration_cpu_stop() and perform the actual migration away from the CPU it will simply return -ENOENT rather than calling migration_cpu_stop(). We then return from the sched_setaffinity syscall back to the user task that is now running on a CPU which it just asked not to run on, and which is not present in its cpus_allowed mask. This patch resolves the problem by having select_task_rq() enforce that user tasks run on CPUs that are active - the same requirement that select_fallback_rq() already enforces. This should ensure that newly onlined CPUs reach the CPUHP_AP_ACTIVE state before being able to schedule user tasks, and also implies that bringup_wait_for_ap() will have called stop_machine_unpark() which resolves the sched_setaffinity issue above. I haven't yet investigated them, but it may be of interest to review whether any of the actions performed by hotplug states between CPUHP_AP_ONLINE_IDLE & CPUHP_AP_ACTIVE could have similar unintended effects on user tasks that might schedule before they are reached, which might widen the scope of the problem from just affecting the behaviour of sched_setaffinity. Signed-off-by: Paul Burton <paul.burton@mips.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180526154648.11635-2-paul.burton@mips.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-05-31sched/core: Fix rules for running on online && !active CPUsPeter Zijlstra1-12/+30
As already enforced by the WARN() in __set_cpus_allowed_ptr(), the rules for running on an online && !active CPU are stricter than just being a kthread, you need to be a per-cpu kthread. If you're not strictly per-CPU, you have better CPUs to run on and don't need the partially booted one to get your work done. The exception is to allow smpboot threads to bootstrap the CPU itself and get kernel 'services' initialized before we allow userspace on it. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 955dbdf4ce87 ("sched: Allow migrating kthreads into online but inactive CPUs") Link: http://lkml.kernel.org/r/20170725165821.cejhb7v2s3kecems@hirez.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-05-31spi: Fix typo on SPI_MEM help textFabio Estevam1-1/+1
The correct form is "a high-level", so fix it accordingly. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-05-31xfrm Fix potential error pointer dereference in xfrm_bundle_create.Steffen Klassert1-3/+2
We may derference an invalid pointer in the error path of xfrm_bundle_create(). Fix this by returning this error pointer directly instead of assigning it to xdst0. Fixes: 45b018beddb6 ("ipsec: Create and use new helpers for dst child access.") Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-05-31fs: clear writeback errors in inode_init_alwaysDarrick J. Wong1-0/+1
In inode_init_always(), we clear the inode mapping flags, which clears any retained error (AS_EIO, AS_ENOSPC) bits. Unfortunately, we do not also clear wb_err, which means that old mapping errors can leak through to new inodes. This is crucial for the XFS inode allocation path because we recycle old in-core inodes and we do not want error state from an old file to leak into the new file. This bug was discovered by running generic/036 and generic/047 in a loop and noticing that the EIOs generated by the collision of direct and buffered writes in generic/036 would survive the remount between 036 and 047, and get reported to the fsyncs (on different files!) in generic/047. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Brian Foster <bfoster@redhat.com>
2018-05-31block: fixup bioset_integrity_create() callJens Axboe1-1/+1
Missed converting the bioset_integrity_create() bounce bio set call. Fixes: 338aa96d5661 ("block: convert bounce, q->bio_split to bioset_init()/mempool_init()") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-31Merge tag 'drm-misc-fixes-2018-05-30' of ↵Dave Airlie3-13/+6
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes dw-hdmi: Fix Oops regression from rc1 (Neil) Cc: Neil Armstrong <narmstrong@baylibre.com> * tag 'drm-misc-fixes-2018-05-30' of git://anongit.freedesktop.org/drm/drm-misc: drm/bridge/synopsys: dw-hdmi: fix dw_hdmi_setup_rx_sense
2018-05-31Merge tag 'for-linus-20180530' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+1
Pull block fix from Jens Axboe: "Just a single fix that should make it into this release, fixing a regression with T10-DIF on NVMe" * tag 'for-linus-20180530' of git://git.kernel.dk/linux-block: nvme: fix extended data LBA supported setting
2018-05-31Merge tag 'selinux-pr-20180530' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux Pull SELinux fix from Paul Moore: "One more small fix for SELinux: a small string length fix found by KASAN. I dislike sending patches this late in the release cycle, but this patch fixes a legitimate problem, is very small, limited in scope, and well understood. There are two threads with more information on the problem, the latest is linked below: https://marc.info/?t=152723737400001&r=1&w=2 Stephen points out in the thread linked above: 'Such a setxattr() call can only be performed by a process with CAP_MAC_ADMIN that is also allowed mac_admin permission in SELinux policy. Consequently, this is never possible on Android (no process is allowed mac_admin permission, always enforcing) and is only possible in Fedora/RHEL for a few domains (if enforcing)'" * tag 'selinux-pr-20180530' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: KASAN: slab-out-of-bounds in xattr_getsecurity
2018-05-31block: Drop bioset_create()Kent Overstreet2-52/+15
All users have been converted to bioset_init(), kill off the old API. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-31xfs: convert to bioset_init()/mempool_init()Kent Overstreet3-8/+7
Convert XFS to embedded bio sets. Acked-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-31btrfs: convert to bioset_init()/mempool_init()Kent Overstreet1-14/+11
Convert btrfs to embedded bio sets. Acked-by: Chris Mason <clm@fb.com> Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-31fs: convert block_dev.c to bioset_init()Kent Overstreet1-6/+3
Convert block DIO code to embedded bio sets. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-31target: convert to bioset_init()/mempool_init()Kent Overstreet2-9/+7
Convert the target code to embedded bio sets. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-31dm: convert to bioset_init()/mempool_init()Kent Overstreet17-206/+197
Convert dm to embedded bio sets. Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-31md: convert to bioset_init()/mempool_init()Kent Overstreet15-181/+159
Convert md to embedded bio sets. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-31bcache: convert to bioset_init()/mempool_init()Kent Overstreet7-52/+37
Convert bcache to embedded bio sets. Reviewed-by: Coly Li <colyli@suse.de> Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-31lightnvm: convert to bioset_init()/mempool_init()Kent Overstreet6-65/+65
Convert lightnvm to embedded bio sets. Reviewed-by: Javier González <javier@cnexlabs.com> Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-31pktcdvd: convert to bioset_init()/mempool_init()Kent Overstreet2-26/+26
Convert pktcdvd to embedded bio sets. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-31drbd: convert to bioset_init()/mempool_init()Kent Overstreet6-59/+38
Convert drbd to embedded bio sets and mempools. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-31block: convert bounce, q->bio_split to bioset_init()/mempool_init()Kent Overstreet7-33/+41
Convert the core block functionality to embedded bio sets. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-31Merge branch 'linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fix from Herbert Xu: "This fixes a potential kernel panic in the inside-secure driver" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: inside-secure - do not use memset on MMIO
2018-05-30platform/chrome: Use to_cros_ec_dev more broadlyGwendal Grignou4-22/+12
Move to_cros_ec_dev macro to cros_ec.h and use it when the private ec object is needed from device object. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Benson Leung <bleung@chromium.org>
2018-05-30blk-throttle: return proper bool type to caller instead of 0/1Chengguang Xu1-5/+5
Change to return true/false only for bool type return code. Signed-off-by: Chengguang Xu <cgxu519@gmx.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-30perf tools: Fix perf.data format description of NRCPUS headerArnaldo Carvalho de Melo1-1/+1
In the perf.data HEADER_CPUDESC feadure header we store first the number of available CPUs in the system, then the number of CPUs at the time of writing the header, not the other way around. Reported-by: Thomas-Mich Richter <tmricht@linux.ibm.com> Acked-by: Andi Kleen <ak@linux.intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kim Phillips <kim.phillips@arm.com> Cc: Lakshman Annadorai <lakshmana@google.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Simon Que <sque@chromium.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-j7o92acm2vnxjv70y4o3swoc@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-05-30perf script python: Add addr into perf sample dictLeo Yan1-0/+2
ARM CoreSight auxtrace uses 'sample->addr' to record the target address for branch instructions, so the data of 'sample->addr' is required for tracing data analysis. This commit collects data of 'sample->addr' into perf sample dict, finally can be used for python script for parsing event. Signed-off-by: Leo Yan <leo.yan@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Walker <robert.walker@arm.com> Cc: Tor Jeremiassen <tor@ti.com> Cc: coresight@lists.linaro.org Cc: kim.phillips@arm.co Cc: linux-arm-kernel@lists.infradead.org Cc: linux-doc@vger.kernel.org Link: http://lkml.kernel.org/r/1527497103-3593-3-git-send-email-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-05-30perf data: Update documentation section on cpu topologyThomas Richter1-0/+8
Add an explanation of each cpu's core and socket identifier to the perf.data file format documentation. Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20180528074433.16652-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-05-30perf cs-etm: Fix indexing for decoder packet queueMathieu Poirier1-2/+10
The tail of a queue is supposed to be pointing to the next available slot in a queue. In this implementation the tail is incremented before it is used and as such points to the last used element, something that has the immense advantage of centralizing tail management at a single location and eliminating a lot of redundant code. But this needs to be taken into consideration on the dequeueing side where the head also needs to be incremented before it is used, or the first available element of the queue will be skipped. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Tested-by: Leo Yan <leo.yan@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Walker <robert.walker@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1527289854-10755-1-git-send-email-mathieu.poirier@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-05-30perf bpf: Fix NULL return handling in bpf__prepare_load()YueHaibing1-3/+3
bpf_object__open()/bpf_object__open_buffer can return error pointer or NULL, check the return values with IS_ERR_OR_NULL() in bpf__prepare_load and bpf__prepare_load_buffer Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: netdev@vger.kernel.org Link: https://lkml.kernel.org/n/tip-psf4xwc09n62al2cb9s33v9h@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-05-30drm/bridge/synopsys: dw-hdmi: fix dw_hdmi_setup_rx_senseNeil Armstrong3-13/+6
The dw_hdmi_setup_rx_sense exported function should not use struct device to recover the dw-hdmi context using drvdata, but take struct dw_hdmi directly like other exported functions. This caused a regression using Meson DRM on S905X since v4.17-rc1 : Internal error: Oops: 96000007 [#1] PREEMPT SMP [...] CPU: 0 PID: 124 Comm: irq/32-dw_hdmi_ Not tainted 4.17.0-rc7 #2 Hardware name: Libre Technology CC (DT) [...] pc : osq_lock+0x54/0x188 lr : __mutex_lock.isra.0+0x74/0x530 [...] Process irq/32-dw_hdmi_ (pid: 124, stack limit = 0x00000000adf418cb) Call trace: osq_lock+0x54/0x188 __mutex_lock_slowpath+0x10/0x18 mutex_lock+0x30/0x38 __dw_hdmi_setup_rx_sense+0x28/0x98 dw_hdmi_setup_rx_sense+0x10/0x18 dw_hdmi_top_thread_irq+0x2c/0x50 irq_thread_fn+0x28/0x68 irq_thread+0x10c/0x1a0 kthread+0x128/0x130 ret_from_fork+0x10/0x18 Code: 34000964 d00050a2 51000484 9135c042 (f864d844) ---[ end trace 945641e1fbbc07da ]--- note: irq/32-dw_hdmi_[124] exited with preempt_count 1 genirq: exiting task "irq/32-dw_hdmi_" (124) is an active IRQ thread (irq 32) Fixes: eea034af90c6 ("drm/bridge/synopsys: dw-hdmi: don't clobber drvdata") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Koen Kooi <koen@dominion.thruhere.net> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/1527673438-20643-1-git-send-email-narmstrong@baylibre.com
2018-05-30blk-mq: only iterate over inflight requests in blk_mq_tagset_busy_iterChristoph Hellwig5-21/+4
We already check for started commands in all callbacks, but we should also protect against already completed commands. Do this by taking the checks to common code. Acked-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-30nbd: clear DISCONNECT_REQUESTED flag once disconnection occurs.Kevin Vigor1-6/+15
When a userspace client requests a NBD device be disconnected, the DISCONNECT_REQUESTED flag is set. While this flag is set, the driver will not inform userspace when a connection is closed. Unfortunately the flag was never cleared, so once a disconnect was requested the driver would thereafter never tell userspace about a closed connection. Thus when connections failed due to timeout, no attempt to reconnect was made and eventually the device would fail. Fix by clearing the DISCONNECT_REQUESTED flag (and setting the DISCONNECTED flag) once all connections are closed. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Kevin Vigor <kvigor@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-30vhost_net: flush batched heads before trying to busy pollingJason Wang1-13/+24
After commit e2b3b35eb989 ("vhost_net: batch used ring update in rx"), we tend to batch updating used heads. But it doesn't flush batched heads before trying to do busy polling, this will cause vhost to wait for guest TX which waits for the used RX. Fixing by flush batched heads before busy loop. 1 byte TCP_RR performance recovers from 13107.83 to 50402.65. Fixes: e2b3b35eb989 ("vhost_net: batch used ring update in rx") Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-30blk-throttle: fix potential NULL pointer dereference in throtl_select_dispatchLiu Bo1-1/+2
tg in throtl_select_dispatch is used first and then do check. Since tg may be NULL, it has potential NULL pointer dereference risk. So fix it. Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com> Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-30block: kyber: make kyber more friendly with mergingJianchao Wang1-32/+158
Currently, kyber is very unfriendly with merging. kyber depends on ctx rq_list to do merging, however, most of time, it will not leave any requests in ctx rq_list. This is because even if tokens of one domain is used up, kyber will try to dispatch requests from other domain and flush the rq_list there. To improve this, we setup kyber_ctx_queue (kcq) which is similar with ctx, but it has rq_lists for different domain and build same mapping between kcq and khd as the ctx & hctx. Then we could merge, insert and dispatch for different domains separately. At the same time, only flush the rq_list of kcq when get domain token successfully. Then if one domain token is used up, the requests could be left in the rq_list of that domain and maybe merged with following io. Following is my test result on machine with 8 cores and NVMe card INTEL SSDPEKKR128G7 fio size=256m ioengine=libaio iodepth=64 direct=1 numjobs=8 seq/random +------+---------------------------------------------------------------+ |patch?| bw(MB/s) | iops | slat(usec) | clat(usec) | merge | +----------------------------------------------------------------------+ | w/o | 606/612 | 151k/153k | 6.89/7.03 | 3349.21/3305.40 | 0/0 | +----------------------------------------------------------------------+ | w/ | 1083/616 | 277k/154k | 4.93/6.95 | 1830.62/3279.95 | 223k/3k | +----------------------------------------------------------------------+ When set numjobs to 16, the bw and iops could reach 1662MB/s and 425k on my platform. Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-30blk-mq: abstract out blk-mq-sched rq list iteration bio merge helperJens Axboe2-11/+26
No functional changes in this patch, just a prep patch for utilizing this in an IO scheduler. Signed-off-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Omar Sandoval <osandov@fb.com>
2018-05-30Merge branch 'for-linus' of ↵Linus Torvalds2-3/+6
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: - a missing -msoft-float for the compile of the kexec purgatory - a fix for the dasd driver to avoid the double use of a field in the 'struct request' [ That latter one is being discussed, and Christoph asked for something cleaner, but for now it's a fix ] * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/dasd: use blk_mq_rq_from_pdu for per request data s390/purgatory: Fix endless interrupt loop
2018-05-30perf test: "Session topology" dumps core on s390Thomas Richter1-6/+24
The "perf test Session topology" entry fails with core dump on s390. The root cause is a NULL pointer dereference in function check_cpu_topology() line 76 (or line 82 without -v). The session->header.env.cpu variable is NULL because on s390 function process_cpu_topology() returns with error: socket_id number is too big. You may need to upgrade the perf tool. and releases the env.cpu variable via zfree() and sets it to NULL. Here is the gdb output: (gdb) n 76 pr_debug("CPU %d, core %d, socket %d\n", i, (gdb) n Program received signal SIGSEGV, Segmentation fault. 0x00000000010f4d9e in check_cpu_topology (path=0x3ffffffd6c8 "/tmp/perf-test-J6CHMa", map=0x14a1740) at tests/topology.c:76 76 pr_debug("CPU %d, core %d, socket %d\n", i, (gdb) Make sure the env.cpu variable is not used when its NULL. Test for NULL pointer and return TEST_SKIP if so. Output before: [root@p23lp27 perf]# ./perf test -F 39 39: Session topology :Segmentation fault (core dumped) [root@p23lp27 perf]# Output after: [root@p23lp27 perf]# ./perf test -vF 39 39: Session topology : --- start --- templ file: /tmp/perf-test-Ajx59D socket_id number is too big.You may need to upgrade the perf tool. ---- end ---- Session topology: Skip [root@p23lp27 perf]# Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20180528073657.11743-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-08 18:17:40 +0300