summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2011-12-07caif-hsi: Remove wake line modification when flushing FIFOChristian Auby1-11/+0
Raising wake before flushing FIFO and lowering it after caused a spike on AC wake that were sometimes detected and acted upon by the modem. Fixed this by remove wake line modification when flushing FIFO. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-07ipv6: Move xfrm_lookup() call down into icmp6_dst_alloc().David S. Miller4-29/+12
And return error pointers. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-07ipv6: Make third arg to anycast_dst_alloc() bool.David S. Miller4-4/+4
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-07bnx2x: Fix compile errors if CONFIG_CNIC is not setMichael Chan1-2/+2
Don't provide FCoE and iSCSI statistics to management firmware if CONFIG_CNIC is not set. Some needed structure fields are not defined without CONFIG_CNIC. Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-07mac80211: Remove WARN_ON in apply-ht-override logic.Ben Greear1-1/+3
AP interfaces routinely call this logic, so just silently return when this happens instead of splatting the kernel logs. Reported-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-07bcma: pci: use fixed windows when possibleRafał Miłecki1-11/+21
Some cores are mapped in the fixed way, they registers can be accessed all the time. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-07mac80211: accept public action frames with mismatched BSSIDJohannes Berg2-3/+27
Arik's patch "mac80211: allow action frames with unknown BSSID in GO mode" allowed any action frames in P2P mode to go through, but only to cooked monitor interfaces as the IEEE80211_RX_RA_MATCH was still cleared. As a result my no-monitor patches broke invitation responses. Instead of allowing any action frames in P2P GO mode to go through with a wrong BSSID like that patch did, allow all public action frames. They will never be processed by mac80211, but can be reported via nl80211 then. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-07mac80211: fix retransmitJohannes Berg1-1/+4
This fixes another regression from my "pass all fragments to driver at once" patches -- if the packet is being retransmitted then we don't go through all handlers, but we still need to move it to the skbs list, otherwise we run into the first warning in __ieee80211_tx() and leak the skb. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-07iwlwifi: move ucode notification from iwl_priv to iwl_sharedDon Fry9-134/+143
Move the notification structures for ucode operations from the iwl_priv structure to the iwl_shared structure, with associated code changes. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-07iwlwifi: move ucode_type from iwl_priv to iwl_sharedDon Fry7-29/+43
Move the ucode_type variable from the iwl_priv to the iwl_shared structure with associated code changes. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-07iwlwifi: replace iwl_priv reference with iwl_trans for ucode.Don Fry3-36/+36
Replace the references to the iwl_priv structure with the iwl_trans structure as the priv structure is never referenced other than to access the trans structure. Rename from iwlagn to iwl. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-07iwlwifi: rename iwl-agn-ucode as iwl-ucodeDon Fry2-1/+1
iwl-agn-ucode is generic ucode operations, not limited just to iwlagn. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-07iwlwifi: Rename file name from iwl-sv-open.c to iwl-testmode.cWey-Yi Guy2-1/+1
The file dealing with all the operations through testmode, rename it. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-07iwlwifi: add WOWLAN uCode loading support by testmodeHsu, Kenny2-1/+20
Create new tm command for WOWLAN uCode loading to support further debugging function in userspace. - IWL_TM_CMD_APP2DEV_LOAD_WOWLAN_FW Signed-off-by: Kenny Hsu <kenny.hsu@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-07iwlagn: make debug levels more readableJohannes Berg1-31/+27
Using the actual shifted constants here allows one to read and or them more easily. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-07iwlagn: remove MACDUMP debugJohannes Berg2-6/+1
This is only used for TX debugging where there already is more debugging and tracing is more useful anyway, so remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-07iwlagn: remove HC_DUMP debugJohannes Berg1-2/+1
This debug level is unused, remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-07iwlagn: remove TX_REPLY_LIMIT debugJohannes Berg1-2/+0
This macro is unused right now. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-07iwlwifi: declare static for iwl_sram_cleanup functionWey-Yi Guy1-1/+1
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-07iwlwifi: add generic chunk size of tm dumpit packetHsu, Kenny2-11/+13
Use generic chunk size of dumpit packet for all necessary testmode commands instead of add declaration individually. Signed-off-by: Kenny Hsu <kenny.hsu@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-07iwlwifi: add range checking in tm sram read commandKenny Hsu1-1/+22
The size of sram may alter according to ucode type. Retrieve the maximum sram size by current ucode type for range checking to prevent wrong data access. Signed-off-by: Kenny Hsu <kenny.hsu@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-07iwlwifi: add tm commands for sram reading by dumpitHsu, Kenny3-2/+141
Create new testmode commands and attributes to suppot sram data reading. Because the amount of sram data may exceed single skb packet size. Using the nl80211 dump it funtion to deliver sram data to userspace. - IWL_TM_CMD_APP2DEV_READ_SRAM - IWL_TM_CMD_APP2DEV_DUMP_SRAM - IWL_TM_ATTR_SRAM_ADDR - IWL_TM_ATTR_SRAM_SIZE - IWL_TM_ATTR_SRAM_DUMP Signed-off-by: Kenny Hsu <kenny.hsu@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-07ath9k: clarify max_streams for AR9462Mohammed Shafi Shajakhan1-0/+2
max_streams for AR9462 is '2'. it does not fixes anything, but improves the code readability Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-07ath9k_hw: sync to latest AR9462 INIMohammed Shafi Shajakhan2-22/+21
based on systems change to improve rx dynamic range, and enables heavy clip for 5G HT40 MCS0 to improve spectral mask power. also remove an unused function declaration Cc: Wilson Tsao <wtsao@qca.qualcomm.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-07rtl8192c: Do not log firmware load message unless actually doneLarry Finger1-1/+1
A previous commit fixed a problem whereby the rtl8192c driver loaded the firmware from disk many times; however, the log message was not moved. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-07mac80211: Add HT operation modes for IBSSAlexander Simon7-12/+87
The HT mode is set by iw (previous patchsets). The interface is set into the specified HT mode. HT mode and capabilities are announced in beacons. If we add a station that uses HT also, the fastest matching HT mode will be used for transmission. That means if we are using HT40+ and we add a station running on HT40-, we would transfer at HT20. If we join an IBSS with HT40, but the secondary channel is not available, we will fall back into HT20 as well. Allow frame aggregation to start in IBSS mode. Signed-off-by: Alexander Simon <an.alexsimon@googlemail.com> [siwu@hrz.tu-chemnitz.de: Updates] * remove implicit channel_type enum assumptions * use rate_control_rate_init() if channel type changed * remove channel flags check * activate HT IBSS feature support * slightly reword commit message * rebase on wireless-testing Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-07mac80211: handle protection mode, RIFS and ADDBA for HT IBSSSimon Wunderlich3-0/+44
* Follow 802.11n-2009 9.13.3.1 for protection mode and ADDBA * Send ADDBA only to HT STAs - implement 11.5.1.1 partially Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-07nl80211: Parse channel type attribute in an ibss join requestAlexander Simon4-7/+50
Prepare cfg80211 for IBSS HT: * extend cfg80211 ibss struct with channel_type * Check if extension channel can be used * Export can_beacon_sec_chan for use in mac80211 (will be called from ibss.c later). Signed-off-by: Alexander Simon <an.alexsimon@googlemail.com> [siwu@hrz.tu-chemnitz.de: Updates] * fix cfg80211_can_beacon_ext_chan comment * remove implicit channel_type enum assumptions * remove radar channel flags check * add HT IBSS feature flag * reword commit message Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-07iwlegacy: Use kcalloc instead of kzalloc to allocate arrayThomas Meyer1-3/+2
The advantage of kcalloc is, that will prevent integer overflows which could result from the multiplication of number of elements and size and it is also a bit nicer to read. The semantic patch that makes this change is available in https://lkml.org/lkml/2011/11/25/107 Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-07rt2x00: Use kcalloc instead of kzalloc to allocate arrayThomas Meyer1-2/+2
The advantage of kcalloc is, that will prevent integer overflows which could result from the multiplication of number of elements and size and it is also a bit nicer to read. The semantic patch that makes this change is available in https://lkml.org/lkml/2011/11/25/107 Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-07Merge branch 'master' of ↵John W. Linville18-281/+880
git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth-next
2011-12-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds19-132/+155
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net: Silence seq_scale() unused warning ipv4:correct description for tcp_max_syn_backlog pasemi_mac: Fix building as module netback: Fix alert message. r8169: fix Rx index race between FIFO overflow recovery and NAPI handler. r8169: Rx FIFO overflow fixes. ipv4: Fix peer validation on cached lookup. ipv4: make sure RTO_ONLINK is saved in routing cache iwlwifi: change the default behavior of watchdog timer iwlwifi: do not re-configure HT40 after associated iwlagn: fix HW crypto for TX-only keys Revert "mac80211: clear sta.drv_priv on reconfiguration" mac80211: fill rate filter for internal scan requests cfg80211: amend regulatory NULL dereference fix cfg80211: fix race on init and driver registration
2011-12-06Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds6-5/+15
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: ftrace: Fix hash record accounting bug perf: Fix parsing of __print_flags() in TP_printk() jump_label: jump_label_inc may return before the code is patched ftrace: Remove force undef config value left for testing tracing: Restore system filter behavior tracing: fix event_subsystem ref counting
2011-12-06net: Silence seq_scale() unused warningStephen Boyd1-0/+2
On a CONFIG_NET=y build net/core/secure_seq.c:22: warning: 'seq_scale' defined but not used Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-06sock_diag: Move the sock_ code to net/core/Pavel Emelyanov3-100/+158
This patch moves the sock_ code from inet_diag.c to generic sock_diag.c file and provides necessary request_module-s calls and a pointer on inet_diag_compat dumping routine. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-06inet_diag: Cleanup type2proto last userPavel Emelyanov1-23/+24
Now all the code works with sock_diag_req-compatible structs, so it's possible to stop using the inet_diag_type2proto in inet_csk_diag_fill. Pass the inet_diag_req into it and use the sdiag_protocol field. At the same time remove the explicit ext argument, since it's also on the req. However, this conversion is still required in _compat code, so just move this routine, not remove. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-06inet_diag: Introduce socket family checksPavel Emelyanov1-1/+11
The new API will specify family to work with. Teach the existing socket walking code to bypass not interesting ones. To preserve compatibility with existing behavior the _compat code sets interesting family to AF_UNSPEC to dump them all. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-06inet_diag: Switch the _dump to work with new headerPavel Emelyanov1-18/+53
Make inet_diag_dumo work with given header instead of calculating one from the nl message. The SOCK_DIAG_BY_FAMILY just passes skb's one through, the compat code converts the old header to new one. Also fix the bytecode calculation to find one at proper offset. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-06inet_diag: Switch the _get_exact to work with new headerPavel Emelyanov1-7/+22
Make inet_diag_get_exact work with given header instead of calculating one from the nl message. The SOCK_DIAG_BY_FAMILY just passes skb's one through, the compat code converts the old header to new one. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-06inet_diag: Introduce new inet_diag_req headerPavel Emelyanov2-8/+17
This one coinsides with the sock_diag_req in the beginning and contains only used fields from its previous analogue. The existing code is patched to use the _compat version of it for now. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-06sock_diag: Initial skeletonPavel Emelyanov2-2/+123
When receiving the SOCK_DIAG_BY_FAMILY message we have to find the handler for provided family and pass the nl message to it. This patch describes an infrastructure to work with such nandlers and implements stubs for AF_INET(6) ones. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-06inet_diag: Switch from _GETSOCK to IPPROTO_ numbersPavel Emelyanov3-15/+27
Sorry, but the vger didn't let this message go to the list. Re-sending it with less spam-filter-prone subject. When dumping the AF_INET/AF_INET6 sockets user will also specify the protocol, so prepare the protocol diag handlers to work with IPPROTO_ constants. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-06inet_diag: Move byte-code finding up the call-stackPavel Emelyanov1-19/+17
Current code calculates it at fixed offset. This offset will change, so move the BC calculation upper to make the further patching simpler. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-06sock_diag: Introduce new message typePavel Emelyanov2-2/+16
This type will run the family+protocol based socket dumping. Also prepare the stub function for it. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-06inet_diag: Partly rename inet_ to sock_Pavel Emelyanov5-18/+25
The ultimate goal is to get the sock_diag module, that works in family+protocol terms. Currently this is suitable to do on the inet_diag basis, so rename parts of the code. It will be moved to sock_diag.c later. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-06batman-adv: format multi-line if in the correct wayAntonio Quartulli1-2/+1
in an multi-line if statement leading edges should line up to the opening parenthesis Reported-by: David Miller <davem@davemloft.net> Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-12-06batman-adv: remove extra negation in gw_out_of_range()Dan Carpenter1-1/+1
There is a typo here where an extra '!' made the check to the opposite of what was intended. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-12-06caif-spi: Bugfix for dump upon device removalErwan Bracq2-88/+92
Fix dump upon device removal, by moving deinitialization from platform-device-remove to network-interface-uninit. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-06Merge branch 'for-davem' of ↵David S. Miller132-2805/+6635
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next
2011-12-06bnx2x: fix crash while ethtool -tDmitry Kravkov1-0/+3
commit 2df1a70aaf70e8dff11b89b938a5f317556ee640 "bnx2x: Support for byte queue limits" has introduced an asymmetry in usage of netdev_tx_completed_queue and netdev_tx_sent_queue. Missing call to netdev_tx_sent_queue causes the crash during ethtool -t. The patch adds the missing call. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-07 16:49:20 +0300