summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2009-10-02drm/radeon/kms: Convert R100 to new init path (V2)Jerome Glisse8-189/+586
New init path allow to simply asic initialization and make easier to trace what happen on each different asic. We are removing most callback. More cleanup should happen latter to remove even more callback. Also cleanup register specific to R100,RV200,RV250. Version 2 correct the placement on IGP of the VRAM inside GPU address space to match the stollen RAM placement of IGP. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-02drm/radeon/kms: Convert R300 to new init pathJerome Glisse4-146/+345
Also cleanup register specific to R300. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-02drm/radeon/kms: Convert RS400/RS480 to new init path & fix legacy VGA (V3)Jerome Glisse11-144/+582
Also cleanup register specific to RS400/RS480. This patch also fix legacy VGA register used to disable VGA access we were programming wrong register. Now we should properly disable VGA on r100 up to rs400 asics. Note that RS400/RS480 resume is broken, it hangs the computer while reprogramming dynamic clock, doesn't work either without that patch. We need to spend more time investigating this issue. Version 2 of the patch remove dead code that was left commented out in the previous version. Version 3 correct the placement on IGP of the VRAM inside GPU address space to match the stollen RAM placement of IGP. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-29drm/radeon/kms: Convert R520 to new init path and associated cleanupJerome Glisse5-128/+376
Convert the r520 asic support to new init path, change are smaller than previous one as most of the architecture is now in place and more code sharing can happen btw various asics. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-09-29drm/radeon/kms: Convert RV515 to new init path and associated cleanupJerome Glisse11-158/+712
Convert the rv515 asic support to new init path also add an explanation in radeon.h about the new init path. There is also few cleanups associated with this change (others asic calling rv515 helper functions). Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-09-29drm: fix radeon DRM warnings when !CONFIG_DEBUG_FSMikael Pettersson1-4/+3
Compiling the radeon DRM driver with !CONFIG_DEBUG_FS throws the following warnings: drivers/gpu/drm/radeon/radeon_ttm.c: In function 'radeon_ttm_debugfs_init': drivers/gpu/drm/radeon/radeon_ttm.c:714: warning: unused variable 'i' drivers/gpu/drm/radeon/radeon_ttm.c: At top level: drivers/gpu/drm/radeon/radeon_ttm.c:692: warning: 'radeon_mem_types_list' defined but not used drivers/gpu/drm/radeon/radeon_ttm.c:693: warning: 'radeon_mem_types_names' defined but not used Fix: move these variables inside the #if defined(CONFIG_DEBUG_FS) block in radeon_ttm_debugsfs_init(), which is the only place using them. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-09-29drm: fix drm_fb_helper warning when !CONFIG_MAGIC_SYSRQMikael Pettersson1-0/+2
Compiling DRM throws the following warning if MAGIC_SYSRQ is disabled: drivers/gpu/drm/drm_fb_helper.c:101: warning: 'sysrq_drm_fb_helper_restore_op' defined but not used Fix: place sysrq_drm_fb_helper_restore_op and associated definitions inside #ifdef CONFIG_MAGIC_SYSRQ. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-09-28drm/r600: fix memory leak introduced with 64k malloc avoidance fix.Dave Airlie1-0/+2
The legacy r600 path shares code, but doesn't share quite enough to get the freeing correct. Free the pages here also. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-28drm/kms: make fb helper work for all drivers.Dave Airlie3-26/+43
This initialises the fb helper with the connector helper, so that the fb cmdline code works for intel as well. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-26drm/radeon/r600: fix offset handling in CS parserAlex Deucher1-5/+5
Need add reloc offset to the offset in the actual packet. Fixes use of the DRAW_INDEX packet by the 3D driver. [airlied: modified first one where idx_value == ib[idx+0] Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-09-26drm/radeon/kms/r600: fix forcing pci mode on agp cardsAlex Deucher1-4/+7
All we need to do on r6xx/r7xx is clear the RADEON_IS_AGP flag; the rest is handled in r600.c fixes fdo bug 23990: http://bugs.freedesktop.org/show_bug.cgi?id=23990 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-09-26drm/radeon/kms: fix for the extra pages copying.Dave Airlie1-3/+1
Thanks to Michel for pointing this out to me, this is why I need to get more sleep, over complicate this a bit. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-26drm/radeon/kms/r600: add support for vline relocsAlex Deucher3-1/+128
Provides support for anti-tearing functionality in the ddx. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-09-26drm/radeon/kms: fix some bugs in vline relocAlex Deucher1-6/+5
- fix offset of NOP packet for parsing - fix p->idx increments - fix bad mask when updating crtc vline info Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-09-26drm/radeon/kms/r600: clamp vram to aperture sizeAlex Deucher2-0/+14
r6xx and r7xx was missing this. We don't support non-CPU accessible vram yet. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-09-26drm/kms: protect against fb helper not being created.Dave Airlie2-4/+23
If drivers don't init the fb helper on the connector, the cmdline code won't work, but it shouldn't crash either. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-25drm/r600: get values from the passed in IB not the copy.Dave Airlie1-11/+13
this avoids reading back the IB on AGP, also it avoids the race where since we haven't fetched the page from the main IB and written it to the gpu one, reading back fetches 0. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-25drm: create gitignore file for radeonAmerigo Wang1-0/+3
Got lots of untracked files after compiling. These files are generated, thus should be ignored by git. Signed-off-by: WANG Cong <amwang@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-25drm/radeon/kms: remove unneeded master create/destroy functions.Dave Airlie2-54/+0
We shouldn't need these at all in radeon kms mode. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-25drm/kms: start adding command line interface using fb.Dave Airlie10-21/+386
[note this requires an fb patch posted to linux-fbdev-devel already] This uses the normal video= command line option to control the kms output setup at boot time. It is used to override the autodetection done by kms. video= normally takes a framebuffer as the first parameter, in kms it will take a connector name, DVI-I-1, or LVDS-1 etc. If no output connector is specified the mode string will apply to all connectors. The mode specification used will match down the probed modes, and if no mode is found it will add a CVT mode that matches. video=1024x768 - all connectors match a 1024x768 mode or add a CVT on video=VGA-1:1024x768, VGA-1 connector gets mode only. The same strings as used in current fb modedb.c are used, except I've added three more letters, e, D, d, e = enable, D = enable Digital, d = disable, which allow a connector to be forced into a certain state. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-25fb: change rules for global rules match.Dave Airlie1-1/+1
Having a : should be enough 'fb:' isn't really useful if the fb wants to a kms output ID. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-25drm/radeon/kms: don't require up to 64k allocations. (v2)Dave Airlie7-271/+370
This avoids needing to do a kmalloc > PAGE_SIZE for the main indirect buffer chunk, it adds an accessor for all reads from the chunk and caches a single page at a time for subsequent reads. changes since v1: Use a two page pool which should be the most common case a single packet spanning > PAGE_SIZE will be hit, but I'm having trouble seeing anywhere we currently generate anything like that. hopefully proper short page copying at end added parser_error flag to set deep errors instead of having to test every ib value fetch. fixed bug in patch that went to list. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-25drm/radeon/kms: enable dac load detection by default.Dave Airlie1-0/+8
when I added the property I forgot to enable it. Thanks to soreau on #radeon for tracking it down. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-25drm/radeon/kms: enable r600 tv outputs.Dave Airlie1-6/+3
I never changed this back when I wrote tv-out support. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-24drm/edid: Fix standard timing parse for EDID <= 1.2Adam Jackson1-5/+12
Aspect ratio code of 0 means 1:1 before EDID 1.3. Signed-off-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-24drm/edid: Detailed standard timing blocks have six timings, not five.Adam Jackson1-2/+1
Signed-off-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-24drm/edid: Ignore bad standard timings.Adam Jackson1-0/+16
Signed-off-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-24drm/edid: const cleanupAdam Jackson1-1/+3
Signed-off-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-23drm/radeon/r600: set correct pitch for 4 byte copyAndre Maasikas2-2/+2
[agd5f: also fix the non-kms path] Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
2009-09-23drm/radeon: consolidate family flags used in pciids.Dave Airlie3-121/+100
having these separate was pointless and introduced a bug when one got updated without the other. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-21drm/radeon: some r420s have a CP race with the DMA engine.Alex Deucher2-0/+26
This patch makes sure the CP doesn't DMA do VRAM while 2D is active by inserting a CP resync token. todo: port to kms. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-21drm/radeon/r600/kms: rv670 is not DCE3Alex Deucher1-1/+1
RV670 was using the wrong modesetting code. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-21drm/radeon/kms: r420 idle after programming GA_ENHANCEDave Airlie1-0/+5
https://bugs.freedesktop.org/show_bug.cgi?id=24041 The idle allows rs690 to startup properly. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-21drm/radeon/kms: more fixes to rv770 suspend/resume path.Dave Airlie2-10/+12
This resumes my RV730PRO (4650) RV770 (4850) fine. Still researching the RV4550 (RV710), resumes without X fine. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-18drm/radeon/kms: more alignment for rv770.c with r600.cDave Airlie1-0/+5
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-18drm/radeon/kms: rv770 blit init called too late.Dave Airlie1-5/+14
re-align with r600 code, to init blit earlier. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-18drm/radeon/kms: move around new init path code to avoid posting at initDave Airlie3-27/+101
We really don't want to post the card at init, it takes a relatively long time and isn't required, so split the resume path into a startup path called by both init/resume and separate resume entry point to do posting. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-18drm/radeon/r600: fix some issues with suspend/resume.Dave Airlie2-16/+21
a) don't zero gart table on gart enable b) move pinning shader object into resume path c) unpin shader object on suspend d) set cp ready to false after cp shutdown on suspend. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-18drm/radeon/kms: disable VGA rendering engine before taking over VRAMDave Airlie4-0/+20
Before we use any of VRAM, we need to disable the VGA rendering engine, this render text mode into a graphical framebuffer for scanout, however it does this on vblank, and can end up overwriting the GART table and r600 shader objects. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-18drm/radeon/kms: Move radeon_get_clock_info() call out of radeon_clocks_init().Michel Dänzer3-2/+4
Someone on IRC reported problems after commit 95a8f1bf4f48b434c9f839ab5a0773f66b39d7c6 ('drm/radeon/kms: Move radeon_clocks_init() call back after getting VRAM info.'). And indeed, at least some ASIC vram_info hooks use the clock info obtained by radeon_get_clock_info(). So, move that call out of radeon_clocks_init(), ahead of the radeon_vram_info() call. [airlied - fixup missing r600/rv770 calls] Signed-off-by: Michel Dänzer <daenzer@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com> drm/radeon/kms: fix get clock info calls for r600/rv770 init path. These were missed when it got split out. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-18drm/radeon/kms: add initial connector propertiesDave Airlie7-62/+376
This adds: coherent mode: TMDS coherent mode for atom cards. scaling mode: LVDS scaler mode load detect: DAC load detection, DVI-I, VGA, TV tmds pll: legacy TMDS pll selection tv standard: TV standard selection. for later: other TV ones? dvi subconnector selection using std prop [contains fixes pointed out on dri-devel for atom bios mixups by Michel] Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-18drm/radeon/kms: Use surfaces for scanout / cursor byte swapping on big endian.Michel Dänzer4-108/+31
Signed-off-by: Michel Dänzer <daenzer@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-18drm/radeon/kms: don't fail if we fail to init GPU accelerationJerome Glisse7-56/+61
Userspace can query if acceleration is working or not true get info ioctl and could fallback to software if for some reason kernel failed to initialize KMS. This should allow to give a working KMS setup in all case (even with non functionning accel). Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-18drm/r600/kms: fixup number of loops per blit calculation.Dave Airlie1-7/+14
Some people were seeing *ERROR* radeon: writting more dword to ring than expected after certain blits, the loops calculation didn't take into account that we do a separate blit for the remainder after doing the aligned blits. Acked-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-18drm/radeon/kms: reprogram format in set base.Dave Airlie2-0/+46
This should in theory fix the problem with a mode set being required for adjusting the color depth. This also adds in the necessary bits to the format tables for 8-bit, though it doesn't work yet. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-18drm/radeon: avivo chips have no separate int bit for displayDave Airlie1-2/+0
display interrupts are not enabled via this register, the DISPLAY_INT bit is a status only to show that other regs need to be read. Noticed by Alex Deucher Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-18drm/radeon/r600: don't do interruptsAlex Deucher2-1/+22
Interrupts are not supported yet. This prevents things like mesa from trying to use them. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-18drm: fix _DRM_GEM addmap error messagePekka Paalanen1-2/+2
Fix the error message: this is add, not rm. Move the closing brace to proper spot: _DRM_GEM branch should not be included in the block. Signed-off-by: Pekka Paalanen <pq@iki.fi> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-18drm: update crtc x/y when only fb changesBen Skeggs1-0/+3
Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-18drm: fix drm_fb_helper handling of kernel crtcsJesse Barnes1-37/+43
The drm_fb_helper shouldn't mess with CRTCs that aren't enabled or in its initial config. Ideally it shouldn't even include CRTCs in its initial config if they're not in use, but my old fix for that no longer works. At any rate, this fixes a real bug I was seeing where after a console blank, both pipes would come back on, even though only one had been enabled before that. Since the other pipe had a bogus config, this led to some screen corruption. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-12 14:42:44 +0300