summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-04-20x86/tsx: Disable TSX development mode at bootPawan Gupta6-18/+55
commit 400331f8ffa3bec5c561417e5eec6848464e9160 upstream. A microcode update on some Intel processors causes all TSX transactions to always abort by default[*]. Microcode also added functionality to re-enable TSX for development purposes. With this microcode loaded, if tsx=on was passed on the cmdline, and TSX development mode was already enabled before the kernel boot, it may make the system vulnerable to TSX Asynchronous Abort (TAA). To be on safer side, unconditionally disable TSX development mode during boot. If a viable use case appears, this can be revisited later. [*]: Intel TSX Disable Update for Selected Processors, doc ID: 643557 [ bp: Drop unstable web link, massage heavily. ] Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com> Suggested-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Neelima Krishnan <neelima.krishnan@intel.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/347bd844da3a333a9793c6687d4e4eb3b2419a3e.1646943780.git.pawan.kumar.gupta@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20x86/tsx: Use MSR_TSX_CTRL to clear CPUID bitsPawan Gupta2-7/+48
commit 258f3b8c3210b03386e4ad92b4bd8652b5c1beb3 upstream. tsx_clear_cpuid() uses MSR_TSX_FORCE_ABORT to clear CPUID.RTM and CPUID.HLE. Not all CPUs support MSR_TSX_FORCE_ABORT, alternatively use MSR_IA32_TSX_CTRL when supported. [ bp: Document how and why TSX gets disabled. ] Fixes: 293649307ef9 ("x86/tsx: Clear CPUID bits when TSX always force aborts") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Neelima Krishnan <neelima.krishnan@intel.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/5b323e77e251a9c8bcdda498c5cc0095be1e1d3c.1646943780.git.pawan.kumar.gupta@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20drm/amdgpu: Enable gfxoff quirk on MacBook ProTomasz Moń1-0/+2
commit 4593c1b6d159f1e5c35c07a7f125e79e5a864302 upstream. Enabling gfxoff quirk results in perfectly usable graphical user interface on MacBook Pro (15-inch, 2019) with Radeon Pro Vega 20 4 GB. Without the quirk, X server is completely unusable as every few seconds there is gpu reset due to ring gfx timeout. Signed-off-by: Tomasz Moń <desowin@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20drm/amd/display: don't ignore alpha property on pre-multiplied modeMelissa Wen2-10/+18
commit e4f1541caf60fcbe5a59e9d25805c0b5865e546a upstream. "Pre-multiplied" is the default pixel blend mode for KMS/DRM, as documented in supported_modes of drm_plane_create_blend_mode_property(): https://cgit.freedesktop.org/drm/drm-misc/tree/drivers/gpu/drm/drm_blend.c In this mode, both 'pixel alpha' and 'plane alpha' participate in the calculation, as described by the pixel blend mode formula in KMS/DRM documentation: out.rgb = plane_alpha * fg.rgb + (1 - (plane_alpha * fg.alpha)) * bg.rgb Considering the blend config mechanisms we have in the driver so far, the alpha mode that better fits this blend mode is the _PER_PIXEL_ALPHA_COMBINED_GLOBAL_GAIN, where the value for global_gain is the plane alpha (global_alpha). With this change, alpha property stops to be ignored. It also addresses Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1734 v2: * keep the 8-bit value for global_alpha_value (Nicholas) * correct the logical ordering for combined global gain (Nicholas) * apply to dcn10 too (Nicholas) Signed-off-by: Melissa Wen <mwen@igalia.com> Tested-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Tested-by: Simon Ser <contact@emersion.fr> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20ipv6: fix panic when forwarding a pkt with no in6 devNicolas Dichtel1-1/+1
commit e3fa461d8b0e185b7da8a101fe94dfe6dd500ac0 upstream. kongweibin reported a kernel panic in ip6_forward() when input interface has no in6 dev associated. The following tc commands were used to reproduce this panic: tc qdisc del dev vxlan100 root tc qdisc add dev vxlan100 root netem corrupt 5% CC: stable@vger.kernel.org Fixes: ccd27f05ae7b ("ipv6: fix 'disable_policy' for fwd packets") Reported-by: kongweibin <kongweibin2@huawei.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20nl80211: correctly check NL80211_ATTR_REG_ALPHA2 sizeJohannes Berg1-1/+2
commit 6624bb34b4eb19f715db9908cca00122748765d7 upstream. We need this to be at least two bytes, so we can access alpha2[0] and alpha2[1]. It may be three in case some userspace used NUL-termination since it was NLA_STRING (and we also push it out with NUL-termination). Cc: stable@vger.kernel.org Reported-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220411114201.fd4a31f06541.Ie7ff4be2cf348d8cc28ed0d626fc54becf7ea799@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20ALSA: pcm: Test for "silence" field in struct "pcm_format_data"Fabio M. De Francesco1-1/+1
commit 2f7a26abb8241a0208c68d22815aa247c5ddacab upstream. Syzbot reports "KASAN: null-ptr-deref Write in snd_pcm_format_set_silence".[1] It is due to missing validation of the "silence" field of struct "pcm_format_data" in "pcm_formats" array. Add a test for valid "pat" and, if it is not so, return -EINVAL. [1] https://lore.kernel.org/lkml/000000000000d188ef05dc2c7279@google.com/ Reported-and-tested-by: syzbot+205eb15961852c2c5974@syzkaller.appspotmail.com Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220409012655.9399-1-fmdefrancesco@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20ALSA: hda/realtek: add quirk for Lenovo Thinkpad X12 speakersTao Jin1-0/+1
commit 264fb03497ec1c7841bba872571bcd11beed57a7 upstream. For this specific device on Lenovo Thinkpad X12 tablet, the verbs were dumped by qemu running a guest OS that init this codec properly. After studying the dump, it turns out that the same quirk used by the other Lenovo devices can be reused. The patch was tested working against the mainline kernel. Cc: <stable@vger.kernel.org> Signed-off-by: Tao Jin <tao-j@outlook.com> Link: https://lore.kernel.org/r/CO6PR03MB6241CD73310B37858FE64C85E1E89@CO6PR03MB6241.namprd03.prod.outlook.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20ALSA: hda/realtek: Add quirk for Clevo PD50PNTTim Crawford1-0/+1
commit 9eb6f5c388060d8cef3c8b616cc31b765e022359 upstream. Fixes speaker output and headset detection on Clevo PD50PNT. Signed-off-by: Tim Crawford <tcrawford@system76.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220405182029.27431-1-tcrawford@system76.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20btrfs: mark resumed async balance as writingNaohiro Aota1-0/+2
commit a690e5f2db4d1dca742ce734aaff9f3112d63764 upstream. When btrfs balance is interrupted with umount, the background balance resumes on the next mount. There is a potential deadlock with FS freezing here like as described in commit 26559780b953 ("btrfs: zoned: mark relocation as writing"). Mark the process as sb_writing to avoid it. Reviewed-by: Filipe Manana <fdmanana@suse.com> CC: stable@vger.kernel.org # 4.9+ Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20btrfs: fix root ref counts in error handling in btrfs_get_root_refJia-Ju Bai1-2/+3
commit 168a2f776b9762f4021421008512dd7ab7474df1 upstream. In btrfs_get_root_ref(), when btrfs_insert_fs_root() fails, btrfs_put_root() can happen for two reasons: - the root already exists in the tree, in that case it returns the reference obtained in btrfs_lookup_fs_root() - another error so the cleanup is done in the fail label Calling btrfs_put_root() unconditionally would lead to double decrement of the root reference possibly freeing it in the second case. Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Fixes: bc44d7c4b2b1 ("btrfs: push btrfs_grab_fs_root into btrfs_get_fs_root") CC: stable@vger.kernel.org # 5.10+ Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20ath9k: Fix usage of driver-private space in tx_infoToke Høiland-Jørgensen2-11/+21
commit 5a6b06f5927c940fa44026695779c30b7536474c upstream. The ieee80211_tx_info_clear_status() helper also clears the rate counts and the driver-private part of struct ieee80211_tx_info, so using it breaks quite a few other things. So back out of using it, and instead define a ath-internal helper that only clears the area between the status_driver_data and the rates info. Combined with moving the ath_frame_info struct to status_driver_data, this avoids clearing anything we shouldn't be, and so we can keep the existing code for handling the rate information. While fixing this I also noticed that the setting of tx_info->status.rates[tx_rateindex].count on hardware underrun errors was always immediately overridden by the normal setting of the same fields, so rearrange the code so that the underrun detection actually takes effect. The new helper could be generalised to a 'memset_between()' helper, but leave it as a driver-internal helper for now since this needs to go to stable. Cc: stable@vger.kernel.org Reported-by: Peter Seiderer <ps.report@gmx.net> Fixes: 037250f0a45c ("ath9k: Properly clear TX status area before reporting to mac80211") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Reviewed-by: Peter Seiderer <ps.report@gmx.net> Tested-by: Peter Seiderer <ps.report@gmx.net> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220404204800.2681133-1-toke@toke.dk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20ath9k: Properly clear TX status area before reporting to mac80211Toke Høiland-Jørgensen1-3/+2
commit 037250f0a45cf9ecf5b52d4b9ff8eadeb609c800 upstream. The ath9k driver was not properly clearing the status area in the ieee80211_tx_info struct before reporting TX status to mac80211. Instead, it was manually filling in fields, which meant that fields introduced later were left as-is. Conveniently, mac80211 actually provides a helper to zero out the status area, so use that to make sure we zero everything. The last commit touching the driver function writing the status information seems to have actually been fixing an issue that was also caused by the area being uninitialised; but it only added clearing of a single field instead of the whole struct. That is now redundant, though, so revert that commit and use it as a convenient Fixes tag. Fixes: cc591d77aba1 ("ath9k: Make sure to zero status.tx_time before reporting TX status") Reported-by: Bagas Sanjaya <bagasdotme@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Tested-by: Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220330164409.16645-1-toke@toke.dk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20cifs: verify that tcon is valid before dereference in cifs_kill_sbRonnie Sahlberg1-3/+3
commit 8b6c58458ee3206dde345fce327a4cb83e69caf9 upstream. On umount, cifs_sb->tlink_tree might contain entries that do not represent a valid tcon. Check the tcon for error before we dereference it. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Cc: stable@vger.kernel.org Reviewed-by: Shyam Prasad N <sprasad@microsoft.com> Reported-by: Xiaoli Feng <xifeng@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20gcc-plugins: latent_entropy: use /dev/urandomJason A. Donenfeld1-17/+27
commit c40160f2998c897231f8454bf797558d30a20375 upstream. While the latent entropy plugin mostly doesn't derive entropy from get_random_const() for measuring the call graph, when __latent_entropy is applied to a constant, then it's initialized statically to output from get_random_const(). In that case, this data is derived from a 64-bit seed, which means a buffer of 512 bits doesn't really have that amount of compile-time entropy. This patch fixes that shortcoming by just buffering chunks of /dev/urandom output and doling it out as requested. At the same time, it's important that we don't break the use of -frandom-seed, for people who want the runtime benefits of the latent entropy plugin, while still having compile-time determinism. In that case, we detect whether gcc's set_random_seed() has been called by making a call to get_random_seed(noinit=true) in the plugin init function, which is called after set_random_seed() is called but before anything that calls get_random_seed(noinit=false), and seeing if it's zero or not. If it's not zero, we're in deterministic mode, and so we just generate numbers with a basic xorshift prng. Note that we don't detect if -frandom-seed is being used using the documented local_tick variable, because it's assigned via: local_tick = (unsigned) tv.tv_sec * 1000 + tv.tv_usec / 1000; which may well overflow and become -1 on its own, and so isn't reliable: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=105171 [kees: The 256 byte rnd_buf size was chosen based on average (250), median (64), and std deviation (575) bytes of used entropy for a defconfig x86_64 build] Fixes: 38addce8b600 ("gcc-plugins: Add latent_entropy plugin") Cc: stable@vger.kernel.org Cc: PaX Team <pageexec@freemail.hu> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220405222815.21155-1-Jason@zx2c4.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20memory: renesas-rpc-if: fix platform-device leak in error pathJohan Hovold1-1/+9
commit b452dbf24d7d9a990d70118462925f6ee287d135 upstream. Make sure to free the flash platform device in the event that registration fails during probe. Fixes: ca7d8b980b67 ("memory: add Renesas RPC-IF driver") Cc: stable@vger.kernel.org # 5.8 Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20220303180632.3194-1-johan@kernel.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20SUNRPC: Fix NFSD's request deferral on RDMA transportsChuck Lever3-1/+5
commit 773f91b2cf3f52df0d7508fdbf60f37567cdaee4 upstream. Trond Myklebust reports an NFSD crash in svc_rdma_sendto(). Further investigation shows that the crash occurred while NFSD was handling a deferred request. This patch addresses two inter-related issues that prevent request deferral from working correctly for RPC/RDMA requests: 1. Prevent the crash by ensuring that the original svc_rqst::rq_xprt_ctxt value is available when the request is revisited. Otherwise svc_rdma_sendto() does not have a Receive context available with which to construct its reply. 2. Possibly since before commit 71641d99ce03 ("svcrdma: Properly compute .len and .buflen for received RPC Calls"), svc_rdma_recvfrom() did not include the transport header in the returned xdr_buf. There should have been no need for svc_defer() and friends to save and restore that header, as of that commit. This issue is addressed in a backport-friendly way by simply having svc_rdma_recvfrom() set rq_xprt_hlen to zero unconditionally, just as svc_tcp_recvfrom() does. This enables svc_deferred_recv() to correctly reconstruct an RPC message received via RPC/RDMA. Reported-by: Trond Myklebust <trondmy@hammerspace.com> Link: https://lore.kernel.org/linux-nfs/82662b7190f26fb304eb0ab1bb04279072439d4e.camel@hammerspace.com/ Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20KVM: x86/mmu: Resolve nx_huge_pages when kvm.ko is loadedSean Christopherson3-8/+37
commit 1d0e84806047f38027d7572adb4702ef7c09b317 upstream. Resolve nx_huge_pages to true/false when kvm.ko is loaded, leaving it as -1 is technically undefined behavior when its value is read out by param_get_bool(), as boolean values are supposed to be '0' or '1'. Alternatively, KVM could define a custom getter for the param, but the auto value doesn't depend on the vendor module in any way, and printing "auto" would be unnecessarily unfriendly to the user. In addition to fixing the undefined behavior, resolving the auto value also fixes the scenario where the auto value resolves to N and no vendor module is loaded. Previously, -1 would result in Y being printed even though KVM would ultimately disable the mitigation. Rename the existing MMU module init/exit helpers to clarify that they're invoked with respect to the vendor module, and add comments to document why KVM has two separate "module init" flows. ========================================================================= UBSAN: invalid-load in kernel/params.c:320:33 load of value 255 is not a valid value for type '_Bool' CPU: 6 PID: 892 Comm: tail Not tainted 5.17.0-rc3+ #799 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Call Trace: <TASK> dump_stack_lvl+0x34/0x44 ubsan_epilogue+0x5/0x40 __ubsan_handle_load_invalid_value.cold+0x43/0x48 param_get_bool.cold+0xf/0x14 param_attr_show+0x55/0x80 module_attr_show+0x1c/0x30 sysfs_kf_seq_show+0x93/0xc0 seq_read_iter+0x11c/0x450 new_sync_read+0x11b/0x1a0 vfs_read+0xf0/0x190 ksys_read+0x5f/0xe0 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae </TASK> ========================================================================= Fixes: b8e8c8303ff2 ("kvm: mmu: ITLB_MULTIHIT mitigation") Cc: stable@vger.kernel.org Reported-by: Bruno Goncalves <bgoncalv@redhat.com> Reported-by: Jan Stancek <jstancek@redhat.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20220331221359.3912754-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20mm: kmemleak: take a full lowmem check in kmemleak_*_phys()Patrick Wang1-4/+4
commit 23c2d497de21f25898fbea70aeb292ab8acc8c94 upstream. The kmemleak_*_phys() apis do not check the address for lowmem's min boundary, while the caller may pass an address below lowmem, which will trigger an oops: # echo scan > /sys/kernel/debug/kmemleak Unable to handle kernel paging request at virtual address ff5fffffffe00000 Oops [#1] Modules linked in: CPU: 2 PID: 134 Comm: bash Not tainted 5.18.0-rc1-next-20220407 #33 Hardware name: riscv-virtio,qemu (DT) epc : scan_block+0x74/0x15c ra : scan_block+0x72/0x15c epc : ffffffff801e5806 ra : ffffffff801e5804 sp : ff200000104abc30 gp : ffffffff815cd4e8 tp : ff60000004cfa340 t0 : 0000000000000200 t1 : 00aaaaaac23954cc t2 : 00000000000003ff s0 : ff200000104abc90 s1 : ffffffff81b0ff28 a0 : 0000000000000000 a1 : ff5fffffffe01000 a2 : ffffffff81b0ff28 a3 : 0000000000000002 a4 : 0000000000000001 a5 : 0000000000000000 a6 : ff200000104abd7c a7 : 0000000000000005 s2 : ff5fffffffe00ff9 s3 : ffffffff815cd998 s4 : ffffffff815d0e90 s5 : ffffffff81b0ff28 s6 : 0000000000000020 s7 : ffffffff815d0eb0 s8 : ffffffffffffffff s9 : ff5fffffffe00000 s10: ff5fffffffe01000 s11: 0000000000000022 t3 : 00ffffffaa17db4c t4 : 000000000000000f t5 : 0000000000000001 t6 : 0000000000000000 status: 0000000000000100 badaddr: ff5fffffffe00000 cause: 000000000000000d scan_gray_list+0x12e/0x1a6 kmemleak_scan+0x2aa/0x57e kmemleak_write+0x32a/0x40c full_proxy_write+0x56/0x82 vfs_write+0xa6/0x2a6 ksys_write+0x6c/0xe2 sys_write+0x22/0x2a ret_from_syscall+0x0/0x2 The callers may not quite know the actual address they pass(e.g. from devicetree). So the kmemleak_*_phys() apis should guarantee the address they finally use is in lowmem range, so check the address for lowmem's min boundary. Link: https://lkml.kernel.org/r/20220413122925.33856-1-patrick.wang.shcn@gmail.com Signed-off-by: Patrick Wang <patrick.wang.shcn@gmail.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20mm: fix unexpected zeroed page mapping with zram swapMinchan Kim1-54/+0
commit e914d8f00391520ecc4495dd0ca0124538ab7119 upstream. Two processes under CLONE_VM cloning, user process can be corrupted by seeing zeroed page unexpectedly. CPU A CPU B do_swap_page do_swap_page SWP_SYNCHRONOUS_IO path SWP_SYNCHRONOUS_IO path swap_readpage valid data swap_slot_free_notify delete zram entry swap_readpage zeroed(invalid) data pte_lock map the *zero data* to userspace pte_unlock pte_lock if (!pte_same) goto out_nomap; pte_unlock return and next refault will read zeroed data The swap_slot_free_notify is bogus for CLONE_VM case since it doesn't increase the refcount of swap slot at copy_mm so it couldn't catch up whether it's safe or not to discard data from backing device. In the case, only the lock it could rely on to synchronize swap slot freeing is page table lock. Thus, this patch gets rid of the swap_slot_free_notify function. With this patch, CPU A will see correct data. CPU A CPU B do_swap_page do_swap_page SWP_SYNCHRONOUS_IO path SWP_SYNCHRONOUS_IO path swap_readpage original data pte_lock map the original data swap_free swap_range_free bd_disk->fops->swap_slot_free_notify swap_readpage read zeroed data pte_unlock pte_lock if (!pte_same) goto out_nomap; pte_unlock return on next refault will see mapped data by CPU B The concern of the patch would increase memory consumption since it could keep wasted memory with compressed form in zram as well as uncompressed form in address space. However, most of cases of zram uses no readahead and do_swap_page is followed by swap_free so it will free the compressed form from in zram quickly. Link: https://lkml.kernel.org/r/YjTVVxIAsnKAXjTd@google.com Fixes: 0bcac06f27d7 ("mm, swap: skip swapcache for swapin of synchronous device") Reported-by: Ivan Babrou <ivan@cloudflare.com> Tested-by: Ivan Babrou <ivan@cloudflare.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: David Hildenbrand <david@redhat.com> Cc: <stable@vger.kernel.org> [4.14+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20mm, page_alloc: fix build_zonerefs_node()Juergen Gross1-1/+1
commit e553f62f10d93551eb883eca227ac54d1a4fad84 upstream. Since commit 6aa303defb74 ("mm, vmscan: only allocate and reclaim from zones with pages managed by the buddy allocator") only zones with free memory are included in a built zonelist. This is problematic when e.g. all memory of a zone has been ballooned out when zonelists are being rebuilt. The decision whether to rebuild the zonelists when onlining new memory is done based on populated_zone() returning 0 for the zone the memory will be added to. The new zone is added to the zonelists only, if it has free memory pages (managed_zone() returns a non-zero value) after the memory has been onlined. This implies, that onlining memory will always free the added pages to the allocator immediately, but this is not true in all cases: when e.g. running as a Xen guest the onlined new memory will be added only to the ballooned memory list, it will be freed only when the guest is being ballooned up afterwards. Another problem with using managed_zone() for the decision whether a zone is being added to the zonelists is, that a zone with all memory used will in fact be removed from all zonelists in case the zonelists happen to be rebuilt. Use populated_zone() when building a zonelist as it has been done before that commit. There was a report that QubesOS (based on Xen) is hitting this problem. Xen has switched to use the zone device functionality in kernel 5.9 and QubesOS wants to use memory hotplugging for guests in order to be able to start a guest with minimal memory and expand it as needed. This was the report leading to the patch. Link: https://lkml.kernel.org/r/20220407120637.9035-1-jgross@suse.com Fixes: 6aa303defb74 ("mm, vmscan: only allocate and reclaim from zones with pages managed by the buddy allocator") Signed-off-by: Juergen Gross <jgross@suse.com> Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Reviewed-by: Wei Yang <richard.weiyang@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20mm/secretmem: fix panic when growing a memfd_secretAxel Rasmussen1-0/+17
commit f9b141f93659e09a52e28791ccbaf69c273b8e92 upstream. When one tries to grow an existing memfd_secret with ftruncate, one gets a panic [1]. For example, doing the following reliably induces the panic: fd = memfd_secret(); ftruncate(fd, 10); ptr = mmap(NULL, 10, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0); strcpy(ptr, "123456789"); munmap(ptr, 10); ftruncate(fd, 20); The basic reason for this is, when we grow with ftruncate, we call down into simple_setattr, and then truncate_inode_pages_range, and eventually we try to zero part of the memory. The normal truncation code does this via the direct map (i.e., it calls page_address() and hands that to memset()). For memfd_secret though, we specifically don't map our pages via the direct map (i.e. we call set_direct_map_invalid_noflush() on every fault). So the address returned by page_address() isn't useful, and when we try to memset() with it we panic. This patch avoids the panic by implementing a custom setattr for memfd_secret, which detects resizes specifically (setting the size for the first time works just fine, since there are no existing pages to try to zero), and rejects them with EINVAL. One could argue growing should be supported, but I think that will require a significantly more lengthy change. So, I propose a minimal fix for the benefit of stable kernels, and then perhaps to extend memfd_secret to support growing in a separate patch. [1]: BUG: unable to handle page fault for address: ffffa0a889277028 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD afa01067 P4D afa01067 PUD 83f909067 PMD 83f8bf067 PTE 800ffffef6d88060 Oops: 0002 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI CPU: 0 PID: 281 Comm: repro Not tainted 5.17.0-dbg-DEV #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:memset_erms+0x9/0x10 Code: c1 e9 03 40 0f b6 f6 48 b8 01 01 01 01 01 01 01 01 48 0f af c6 f3 48 ab 89 d1 f3 aa 4c 89 c8 c3 90 49 89 f9 40 88 f0 48 89 d1 <f3> aa 4c 89 c8 c3 90 49 89 fa 40 0f b6 ce 48 b8 01 01 01 01 01 01 RSP: 0018:ffffb932c09afbf0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffda63c4249dc0 RCX: 0000000000000fd8 RDX: 0000000000000fd8 RSI: 0000000000000000 RDI: ffffa0a889277028 RBP: ffffb932c09afc00 R08: 0000000000001000 R09: ffffa0a889277028 R10: 0000000000020023 R11: 0000000000000000 R12: ffffda63c4249dc0 R13: ffffa0a890d70d98 R14: 0000000000000028 R15: 0000000000000fd8 FS: 00007f7294899580(0000) GS:ffffa0af9bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffa0a889277028 CR3: 0000000107ef6006 CR4: 0000000000370ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? zero_user_segments+0x82/0x190 truncate_inode_partial_folio+0xd4/0x2a0 truncate_inode_pages_range+0x380/0x830 truncate_setsize+0x63/0x80 simple_setattr+0x37/0x60 notify_change+0x3d8/0x4d0 do_sys_ftruncate+0x162/0x1d0 __x64_sys_ftruncate+0x1c/0x20 do_syscall_64+0x44/0xa0 entry_SYSCALL_64_after_hwframe+0x44/0xae Modules linked in: xhci_pci xhci_hcd virtio_net net_failover failover virtio_blk virtio_balloon uhci_hcd ohci_pci ohci_hcd evdev ehci_pci ehci_hcd 9pnet_virtio 9p netfs 9pnet CR2: ffffa0a889277028 [lkp@intel.com: secretmem_iops can be static] Signed-off-by: kernel test robot <lkp@intel.com> [axelrasmussen@google.com: return EINVAL] Link: https://lkml.kernel.org/r/20220324210909.1843814-1-axelrasmussen@google.com Link: https://lkml.kernel.org/r/20220412193023.279320-1-axelrasmussen@google.com Signed-off-by: Axel Rasmussen <axelrasmussen@google.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: <stable@vger.kernel.org> Cc: kernel test robot <lkp@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20perf/imx_ddr: Fix undefined behavior due to shift overflowing the constantBorislav Petkov1-1/+1
[ Upstream commit d02b4dd84e1a90f7f1444d027c0289bf355b0d5a ] Fix: In file included from <command-line>:0:0: In function ‘ddr_perf_counter_enable’, inlined from ‘ddr_perf_irq_handler’ at drivers/perf/fsl_imx8_ddr_perf.c:651:2: ././include/linux/compiler_types.h:352:38: error: call to ‘__compiletime_assert_729’ \ declared with attribute error: FIELD_PREP: mask is not constant _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) ... See https://lore.kernel.org/r/YkwQ6%2BtIH8GQpuct@zn.tnic for the gory details as to why it triggers with older gccs only. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Frank Li <Frank.li@nxp.com> Cc: Will Deacon <will@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: linux-arm-kernel@lists.infradead.org Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20220405151517.29753-10-bp@alien8.de Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20io_uring: use nospec annotation for more indexesPavel Begunkov1-6/+5
[ Upstream commit 4cdd158be9d09223737df83136a1fb65269d809a ] There are still several places that using pre array_index_nospec() indexes, fix them up. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/b01ef5ee83f72ed35ad525912370b729f5d145f4.1649336342.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20io_uring: zero tag on rsrc removalPavel Begunkov1-1/+3
[ Upstream commit 8f0a24801bb44aa58496945aabb904c729176772 ] Automatically default rsrc tag in io_queue_rsrc_removal(), it's safer than leaving it there and relying on the rest of the code to behave and not use it. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/1cf262a50df17478ea25b22494dcc19f3a80301f.1649336342.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20drivers: net: slip: fix NPD bug in sl_tx_timeout()Duoming Zhou1-1/+1
[ Upstream commit ec4eb8a86ade4d22633e1da2a7d85a846b7d1798 ] When a slip driver is detaching, the slip_close() will act to cleanup necessary resources and sl->tty is set to NULL in slip_close(). Meanwhile, the packet we transmit is blocked, sl_tx_timeout() will be called. Although slip_close() and sl_tx_timeout() use sl->lock to synchronize, we don`t judge whether sl->tty equals to NULL in sl_tx_timeout() and the null pointer dereference bug will happen. (Thread 1) | (Thread 2) | slip_close() | spin_lock_bh(&sl->lock) | ... ... | sl->tty = NULL //(1) sl_tx_timeout() | spin_unlock_bh(&sl->lock) spin_lock(&sl->lock); | ... | ... tty_chars_in_buffer(sl->tty)| if (tty->ops->..) //(2) | ... | synchronize_rcu() We set NULL to sl->tty in position (1) and dereference sl->tty in position (2). This patch adds check in sl_tx_timeout(). If sl->tty equals to NULL, sl_tx_timeout() will goto out. Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20220405132206.55291-1-duoming@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20scsi: megaraid_sas: Target with invalid LUN ID is deleted during scanChandrakanth patil2-0/+10
[ Upstream commit 56495f295d8e021f77d065b890fc0100e3f9f6d8 ] The megaraid_sas driver supports single LUN for RAID devices. That is LUN 0. All other LUNs are unsupported. When a device scan on a logical target with invalid LUN number is invoked through sysfs, that target ends up getting removed. Add LUN ID validation in the slave destroy function to avoid the target deletion. Link: https://lore.kernel.org/r/20220324094711.48833-1-chandrakanth.patil@broadcom.com Signed-off-by: Chandrakanth patil <chandrakanth.patil@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20scsi: mvsas: Add PCI ID of RocketRaid 2640Alexey Galakhov1-0/+1
[ Upstream commit 5f2bce1e222028dc1c15f130109a17aa654ae6e8 ] The HighPoint RocketRaid 2640 is a low-cost SAS controller based on Marvell chip. The chip in question was already supported by the kernel, just the PCI ID of this particular board was missing. Link: https://lore.kernel.org/r/20220309212535.402987-1-agalakhov@gmail.com Signed-off-by: Alexey Galakhov <agalakhov@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20scsi: mpt3sas: Fail reset operation if config request timed outSreekanth Reddy1-3/+6
[ Upstream commit f61eb1216c959f93ffabd3b8781fa5b2b22f8907 ] As part of controller reset operation the driver issues a config request command. If this command gets times out, then fail the controller reset operation instead of retrying it. Link: https://lore.kernel.org/r/20220405120637.20528-1-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20drbd: set QUEUE_FLAG_STABLE_WRITESChristoph Böhmwalder1-0/+1
[ Upstream commit 286901941fd18a52b2138fddbbf589ad3639eb00 ] We want our pages not to change while they are being written. Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20drm/amd/display: Fix allocate_mst_payload assert on resumeRoman Li1-1/+2
[ Upstream commit f4346fb3edf7720db3f7f5e1cab1f667cd024280 ] [Why] On resume we do link detection for all non-MST connectors. MST is handled separately. However the condition for telling if connector is on mst branch is not enough for mst hub case. Link detection for mst branch link leads to mst topology reset. That causes assert in dc_link_allocate_mst_payload() [How] Use link type as indicator for mst link. Reviewed-by: Wayne Lin <Wayne.Lin@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20drm/amd/display: Revert FEC check in validationMartin Leung1-4/+0
[ Upstream commit b2075fce104b88b789c15ef1ed2b91dc94198e26 ] why and how: causes failure on install on certain machines Reviewed-by: George Shen <George.Shen@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Martin Leung <Martin.Leung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20drm/amd/display: Enable power gating before init_pipesRoman Li3-6/+9
[ Upstream commit 58e16c752e9540b28a873c44c3bee83e022007c1 ] [Why] In init_hw() we call init_pipes() before enabling power gating. init_pipes() tries to power gate dsc but it may fail because required force-ons are not released yet. As a result with dsc config the following errors observed on resume: "REG_WAIT timeout 1us * 1000 tries - dcn20_dsc_pg_control" "REG_WAIT timeout 1us * 1000 tries - dcn20_dpp_pg_control" "REG_WAIT timeout 1us * 1000 tries - dcn20_hubp_pg_control" [How] Move enable_power_gating_plane() before init_pipes() in init_hw() Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Eric Yang <Eric.Yang2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20spi: cadence-quadspi: fix protocol setup for non-1-1-X operationsMatthias Schiffer1-34/+12
[ Upstream commit 97e4827d775faa9a32b5e1a97959c69dd77d17a3 ] cqspi_set_protocol() only set the data width, but ignored the command and address width (except for 8-8-8 DTR ops), leading to corruption of all transfers using 1-X-X or X-X-X ops. Fix by setting the other two widths as well. While we're at it, simplify the code a bit by replacing the CQSPI_INST_TYPE_* constants with ilog2(). Tested on a TI AM64x with a Macronix MX25U51245G QSPI flash with 1-4-4 read and write operations. Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Link: https://lore.kernel.org/r/20220331110819.133392-1-matthias.schiffer@ew.tq-group.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20myri10ge: fix an incorrect free for skb in myri10ge_sw_tsoXiaomeng Tong1-4/+2
[ Upstream commit b423e54ba965b4469b48e46fd16941f1e1701697 ] All remaining skbs should be released when myri10ge_xmit fails to transmit a packet. Fix it within another skb_list_walk_safe. Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20net: usb: aqc111: Fix out-of-bounds accesses in RX fixupMarcin Kozlowski1-2/+7
[ Upstream commit afb8e246527536848b9b4025b40e613edf776a9d ] aqc111_rx_fixup() contains several out-of-bounds accesses that can be triggered by a malicious (or defective) USB device, in particular: - The metadata array (desc_offset..desc_offset+2*pkt_count) can be out of bounds, causing OOB reads and (on big-endian systems) OOB endianness flips. - A packet can overlap the metadata array, causing a later OOB endianness flip to corrupt data used by a cloned SKB that has already been handed off into the network stack. - A packet SKB can be constructed whose tail is far beyond its end, causing out-of-bounds heap data to be considered part of the SKB's data. Found doing variant analysis. Tested it with another driver (ax88179_178a), since I don't have a aqc111 device to test it, but the code looks very similar. Signed-off-by: Marcin Kozlowski <marcinguy@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20Drivers: hv: balloon: Disable balloon and hot-add accordinglyBoqun Feng1-2/+34
[ Upstream commit be5802795cf8d0b881745fa9ba7790293b382280 ] Currently there are known potential issues for balloon and hot-add on ARM64: * Unballoon requests from Hyper-V should only unballoon ranges that are guest page size aligned, otherwise guests cannot handle because it's impossible to partially free a page. This is a problem when guest page size > 4096 bytes. * Memory hot-add requests from Hyper-V should provide the NUMA node id of the added ranges or ARM64 should have a functional memory_add_physaddr_to_nid(), otherwise the node id is missing for add_memory(). These issues require discussions on design and implementation. In the meanwhile, post_status() is working and essential to guest monitoring. Therefore instead of disabling the entire hv_balloon driver, the ballooning (when page size > 4096 bytes) and hot-add are disabled accordingly for now. Once the issues are fixed, they can be re-enable in these cases. Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20220325023212.1570049-3-boqun.feng@gmail.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20net: axienet: setup mdio unconditionallyAndy Chiu1-7/+6
[ Upstream commit d1c4f93e3f0a023024a6f022a61528c06cf1daa9 ] The call to axienet_mdio_setup should not depend on whether "phy-node" pressents on the DT. Besides, since `lp->phy_node` is used if PHY is in SGMII or 100Base-X modes, move it into the if statement. And the next patch will remove `lp->phy_node` from driver's private structure and do an of_node_put on it right away after use since it is not used elsewhere. Signed-off-by: Andy Chiu <andy.chiu@sifive.com> Reviewed-by: Greentime Hu <greentime.hu@sifive.com> Reviewed-by: Robert Hancock <robert.hancock@calian.com> Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20tlb: hugetlb: Add more sizes to tlb_remove_huge_tlb_entrySteve Capper1-3/+7
[ Upstream commit 697a1d44af8ba0477ee729e632f4ade37999249a ] tlb_remove_huge_tlb_entry only considers PMD_SIZE and PUD_SIZE when updating the mmu_gather structure. Unfortunately on arm64 there are two additional huge page sizes that need to be covered: CONT_PTE_SIZE and CONT_PMD_SIZE. Where an end-user attempts to employ contiguous huge pages, a VM_BUG_ON can be experienced due to the fact that the tlb structure hasn't been correctly updated by the relevant tlb_flush_p.._range() call from tlb_remove_huge_tlb_entry. This patch adds inequality logic to the generic implementation of tlb_remove_huge_tlb_entry s.t. CONT_PTE_SIZE and CONT_PMD_SIZE are effectively covered on arm64. Also, as well as ptes, pmds and puds; p4ds are now considered too. Reported-by: David Hildenbrand <david@redhat.com> Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/linux-mm/811c5c8e-b3a2-85d2-049c-717f17c3a03a@redhat.com/ Signed-off-by: Steve Capper <steve.capper@arm.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20220330112543.863-1-steve.capper@arm.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20arm64: alternatives: mark patch_alternative() as `noinstr`Joey Gouly1-3/+3
[ Upstream commit a2c0b0fbe01419f8f5d1c0b9c581631f34ffce8b ] The alternatives code must be `noinstr` such that it does not patch itself, as the cache invalidation is only performed after all the alternatives have been applied. Mark patch_alternative() as `noinstr`. Mark branch_insn_requires_update() and get_alt_insn() with `__always_inline` since they are both only called through patch_alternative(). Booting a kernel in QEMU TCG with KCSAN=y and ARM64_USE_LSE_ATOMICS=y caused a boot hang: [ 0.241121] CPU: All CPU(s) started at EL2 The alternatives code was patching the atomics in __tsan_read4() from LL/SC atomics to LSE atomics. The following fragment is using LL/SC atomics in the .text section: | <__tsan_unaligned_read4+304>: ldxr x6, [x2] | <__tsan_unaligned_read4+308>: add x6, x6, x5 | <__tsan_unaligned_read4+312>: stxr w7, x6, [x2] | <__tsan_unaligned_read4+316>: cbnz w7, <__tsan_unaligned_read4+304> This LL/SC atomic sequence was to be replaced with LSE atomics. However since the alternatives code was instrumentable, __tsan_read4() was being called after only the first instruction was replaced, which led to the following code in memory: | <__tsan_unaligned_read4+304>: ldadd x5, x6, [x2] | <__tsan_unaligned_read4+308>: add x6, x6, x5 | <__tsan_unaligned_read4+312>: stxr w7, x6, [x2] | <__tsan_unaligned_read4+316>: cbnz w7, <__tsan_unaligned_read4+304> This caused an infinite loop as the `stxr` instruction never completed successfully, so `w7` was always 0. Signed-off-by: Joey Gouly <joey.gouly@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20220405104733.11476-1-joey.gouly@arm.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20regulator: wm8994: Add an off-on delay for WM8994 variantJonathan Bakker1-3/+39
[ Upstream commit 92d96b603738ec4f35cde7198c303ae264dd47cb ] As per Table 130 of the wm8994 datasheet at [1], there is an off-on delay for LDO1 and LDO2. In the wm8958 datasheet [2], I could not find any reference to it. I could not find a wm1811 datasheet to double-check there, but as no one has complained presumably it works without it. This solves the issue on Samsung Aries boards with a wm8994 where register writes fail when the device is powered off and back-on quickly. [1] https://statics.cirrus.com/pubs/proDatasheet/WM8994_Rev4.6.pdf [2] https://statics.cirrus.com/pubs/proDatasheet/WM8958_v3.5.pdf Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/CY4PR04MB056771CFB80DC447C30D5A31CB1D9@CY4PR04MB0567.namprd04.prod.outlook.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20gpu: ipu-v3: Fix dev_dbg frequency outputLeo Ruan1-2/+3
[ Upstream commit 070a88fd4a03f921b73a2059e97d55faaa447dab ] This commit corrects the printing of the IPU clock error percentage if it is between -0.1% to -0.9%. For example, if the pixel clock requested is 27.2 MHz but only 27.0 MHz can be achieved the deviation is -0.8%. But the fixed point math had a flaw and calculated error of 0.2%. Before: Clocks: IPU 270000000Hz DI 24716667Hz Needed 27200000Hz IPU clock can give 27000000 with divider 10, error 0.2% Want 27200000Hz IPU 270000000Hz DI 24716667Hz using IPU, 27000000Hz After: Clocks: IPU 270000000Hz DI 24716667Hz Needed 27200000Hz IPU clock can give 27000000 with divider 10, error -0.8% Want 27200000Hz IPU 270000000Hz DI 24716667Hz using IPU, 27000000Hz Signed-off-by: Leo Ruan <tingquan.ruan@cn.bosch.com> Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20220207151411.5009-1-mark.jonas@de.bosch.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20ata: libata-core: Disable READ LOG DMA EXT for Samsung 840 EVOsChristian Lamparter1-0/+3
[ Upstream commit 5399752299396a3c9df6617f4b3c907d7aa4ded8 ] Samsung' 840 EVO with the latest firmware (EXT0DB6Q) locks up with the a message: "READ LOG DMA EXT failed, trying PIO" during boot. Initially this was discovered because it caused a crash with the sata_dwc_460ex controller on a WD MyBook Live DUO. The reporter "Tice Rex" which has the unique opportunity that he has two Samsung 840 EVO SSD! One with the older firmware "EXT0BB0Q" which booted fine and didn't expose "READ LOG DMA EXT". But the newer/latest firmware "EXT0DB6Q" caused the headaches. BugLink: https://github.com/openwrt/openwrt/issues/9505 Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20net: micrel: fix KS8851_MLL KconfigRandy Dunlap1-0/+1
[ Upstream commit c3efcedd272aa6dd5929e20cf902a52ddaa1197a ] KS8851_MLL selects MICREL_PHY, which depends on PTP_1588_CLOCK_OPTIONAL, so make KS8851_MLL also depend on PTP_1588_CLOCK_OPTIONAL since 'select' does not follow any dependency chains. Fixes kconfig warning and build errors: WARNING: unmet direct dependencies detected for MICREL_PHY Depends on [m]: NETDEVICES [=y] && PHYLIB [=y] && PTP_1588_CLOCK_OPTIONAL [=m] Selected by [y]: - KS8851_MLL [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_MICREL [=y] && HAS_IOMEM [=y] ld: drivers/net/phy/micrel.o: in function `lan8814_ts_info': micrel.c:(.text+0xb35): undefined reference to `ptp_clock_index' ld: drivers/net/phy/micrel.o: in function `lan8814_probe': micrel.c:(.text+0x2586): undefined reference to `ptp_clock_register' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20scsi: ibmvscsis: Increase INITIAL_SRP_LIMIT to 1024Tyrel Datwyler1-1/+1
[ Upstream commit 0bade8e53279157c7cc9dd95d573b7e82223d78a ] The adapter request_limit is hardcoded to be INITIAL_SRP_LIMIT which is currently an arbitrary value of 800. Increase this value to 1024 which better matches the characteristics of the typical IBMi Initiator that supports 32 LUNs and a queue depth of 32. This change also has the secondary benefit of being a power of two as required by the kfifo API. Since, Commit ab9bb6318b09 ("Partially revert "kfifo: fix kfifo_alloc() and kfifo_init()"") the size of IU pool for each target has been rounded down to 512 when attempting to kfifo_init() those pools with the current request_limit size of 800. Link: https://lore.kernel.org/r/20220322194443.678433-1-tyreld@linux.ibm.com Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20scsi: lpfc: Fix queue failures when recovering from PCI parity errorJames Smart1-0/+2
[ Upstream commit df0101197c4d9596682901631f3ee193ed354873 ] When recovering from a pci-parity error the driver is failing to re-create queues, causing recovery to fail. Looking deeper, it was found that the interrupt vector count allocated on the recovery was fewer than the vectors originally allocated. This disparity resulted in CPU map entries with stale information. When the driver tries to re-create the queues, it attempts to use the stale information which indicates an eq/interrupt vector that was no longer created. Fix by clearng the cpup map array before enabling and requesting the IRQs in the lpfc_sli_reset_slot_s4 routine(). Link: https://lore.kernel.org/r/20220317032737.45308-4-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20scsi: target: tcmu: Fix possible page UAFXiaoguang Wang1-1/+2
[ Upstream commit a6968f7a367f128d120447360734344d5a3d5336 ] tcmu_try_get_data_page() looks up pages under cmdr_lock, but it does not take refcount properly and just returns page pointer. When tcmu_try_get_data_page() returns, the returned page may have been freed by tcmu_blocks_release(). We need to get_page() under cmdr_lock to avoid concurrent tcmu_blocks_release(). Link: https://lore.kernel.org/r/20220311132206.24515-1-xiaoguang.wang@linux.alibaba.com Reviewed-by: Bodo Stroesser <bostroesser@gmail.com> Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20Drivers: hv: vmbus: Prevent load re-ordering when reading ring bufferMichael Kelley1-1/+10
[ Upstream commit b6cae15b5710c8097aad26a2e5e752c323ee5348 ] When reading a packet from a host-to-guest ring buffer, there is no memory barrier between reading the write index (to see if there is a packet to read) and reading the contents of the packet. The Hyper-V host uses store-release when updating the write index to ensure that writes of the packet data are completed first. On the guest side, the processor can reorder and read the packet data before the write index, and sometimes get stale packet data. Getting such stale packet data has been observed in a reproducible case in a VM on ARM64. Fix this by using virt_load_acquire() to read the write index, ensuring that reads of the packet data cannot be reordered before it. Preventing such reordering is logically correct, and with this change, getting stale data can no longer be reproduced. Signed-off-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Link: https://lore.kernel.org/r/1648394710-33480-1-git-send-email-mikelley@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20PCI: hv: Propagate coherence from VMbus device to PCI deviceMichael Kelley1-0/+9
[ Upstream commit 8d21732475c637c7efcdb91dc927a4c594e97898 ] PCI pass-thru devices in a Hyper-V VM are represented as a VMBus device and as a PCI device. The coherence of the VMbus device is set based on the VMbus node in ACPI, but the PCI device has no ACPI node and defaults to not hardware coherent. This results in extra software coherence management overhead on ARM64 when devices are hardware coherent. Fix this by setting up the PCI host bus so that normal PCI mechanisms will propagate the coherence of the VMbus device to the PCI device. There's no effect on x86/x64 where devices are always hardware coherent. Signed-off-by: Michael Kelley <mikelley@microsoft.com> Acked-by: Boqun Feng <boqun.feng@gmail.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/1648138492-2191-3-git-send-email-mikelley@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20Drivers: hv: vmbus: Deactivate sysctl_record_panic_msg by default in ↵Andrea Parri (Microsoft)1-6/+12
isolated guests [ Upstream commit 9f8b577f7b43b2170628d6c537252785dcc2dcea ] hv_panic_page might contain guest-sensitive information, do not dump it over to Hyper-V by default in isolated guests. While at it, update some comments in hyperv_{panic,die}_event(). Reported-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Reviewed-by: Dexuan Cui <decui@microsoft.com> Link: https://lore.kernel.org/r/20220301141135.2232-1-parri.andrea@gmail.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-02 16:08:01 +0300