summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2017-02-06drm: Micro-optimise drm_mm_for_each_node_in_range()Chris Wilson3-6/+11
As we require valid start/end parameters, we can replace the initial potential NULL with a pointer to the drm_mm.head_node and so reduce the test on every iteration from a NULL + address comparison to just an address comparison. add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-26 (-26) function old new delta i915_gem_evict_for_node 719 693 -26 (No other users outside of the test harness.) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170204111913.12416-1-chris@chris-wilson.co.uk
2017-02-06drm: mxsfb: Make local symbol mxsfb_funcs staticWei Yongjun1-1/+1
Fixes the following sparse warning: drivers/gpu/drm/mxsfb/mxsfb_drv.c:129:38: warning: symbol 'mxsfb_funcs' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170205160538.16594-1-weiyj.lk@gmail.com
2017-02-06drm: mxsfb: fix error return code in mxsfb_load()Wei Yongjun1-0/+1
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170205160036.7364-1-weiyj.lk@gmail.com
2017-02-03drm/nouveau/kms/nv50: Switch to using atomic helper for flip.Andrey Grodzovsky1-74/+10
v2: Update code after flip_flags moved from plane_state to crtc_state v5: Rename to pageflip_flags. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Link: http://patchwork.freedesktop.org/patch/msgid/1486072591-3893-3-git-send-email-Andrey.Grodzovsky@amd.com
2017-02-03drm/atomic: Save flip flags in drm_crtc_stateAndrey Grodzovsky2-15/+14
Allows using atomic flip helpers for drivers using ASYNC flip. Remove ASYNC_FLIP restriction in helpers and caches the page flip flags in drm_crtc_state to be used in the low level drivers. v2: Resending the patch since the original was broken. v3: Save flag in crtc_state instead of plane_state v4: Reset the flag before using again. v5: Fix type in header. Rename the field to pageflip_flags. Remove unrelated hunk. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Link: http://patchwork.freedesktop.org/patch/msgid/1486072591-3893-2-git-send-email-Andrey.Grodzovsky@amd.com
2017-02-03drm: kselftest for drm_mm and bottom-up allocationChris Wilson2-0/+101
Check that if we request bottom-up allocation from drm_mm_insert_node() we receive the next available hole from the bottom. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170202114434.3060-2-chris@chris-wilson.co.uk
2017-02-03drm: Improve drm_mm search (and fix topdown allocation) with rbtreesChris Wilson23-442/+470
The drm_mm range manager claimed to support top-down insertion, but it was neither searching for the top-most hole that could fit the allocation request nor fitting the request to the hole correctly. In order to search the range efficiently, we create a secondary index for the holes using either their size or their address. This index allows us to find the smallest hole or the hole at the bottom or top of the range efficiently, whilst keeping the hole stack to rapidly service evictions. v2: Search for holes both high and low. Rename flags to mode. v3: Discover rb_entry_safe() and use it! v4: Kerneldoc for enum drm_mm_insert_mode. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Eric Anholt <eric@anholt.net> Cc: Sinclair Yeh <syeh@vmware.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> # vmwgfx Reviewed-by: Lucas Stach <l.stach@pengutronix.de> #etnaviv Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170202210438.28702-1-chris@chris-wilson.co.uk
2017-02-03Merge remote-tracking branch 'airlied/drm-next' into drm-misc-nextDaniel Vetter14-123/+329
Yet another backmerge to get at latest etnaviv code, which is need for Chris' drm_mm patch. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2017-02-02Merge branch 'drm-etnaviv-next' of https://git.pengutronix.de/git/lst/linux ↵Dave Airlie14-123/+329
into drm-next It includes code cleanups from Bhumika and Liviu, a significant shader performance fix and additions to the cmdstream validator from Wladimir and the addition of a cmdbuf suballocator by myself. The suballocator improves performance on all chips by reducing the CPU overhead of the kernel driver and side steps the GC3000 FE MMU flush erratum, now making the workarounds in IOVA allocation we had before unnecessary, which results in a nice cleanup of the code in that area. * 'drm-etnaviv-next' of https://git.pengutronix.de/git/lst/linux: drm/etnaviv: Remove duplicate header file include Revert "drm/etnaviv: trick drm_mm into giving out a low IOVA" drm/etnaviv: add cmdbuf suballocator drm/etnaviv: get cmdbuf physical address through the cmdbuf abstraction drm/etnaviv: wire up iova handling in new cmdbuf abstraction drm/etnaviv: move cmdbuf de-/allocation into own file drm/etnaviv: always flush MMU TLBs on map/unmap drm/etnaviv: constify etnaviv_iommu_ops structures drm/etnaviv: set up initial PULSE_EATER register drm/etnaviv: add new GC3000 sensitive states
2017-02-02drm: Fix build when FBDEV_EMULATION is disabledGabriel Krisman Bertazi1-1/+1
Commit be7f735cd5ea ("drm: Rely on mode_config data for fb_helper initialization") broke the build when CONFIG_DRM_FBDEV_EMULATION is disabled because it didn't update the prototype for drm_fb_helper_init in that case. Fixes: be7f735cd5ea ("drm: Rely on mode_config data for fb_helper initialization") Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170202193900.22075-1-krisman@collabora.co.uk
2017-02-02drm: Rely on mode_config data for fb_helper initializationGabriel Krisman Bertazi38-73/+43
Instead of receiving the num_crts as a parameter, we can read it directly from the mode_config structure. I audited the drivers that invoke this helper and I believe all of them initialize the mode_config struct accordingly, prior to calling the fb_helper. I used the following coccinelle hack to make this transformation, except for the function headers and comment updates. The first and second rules are split because I couldn't find a way to remove the unused temporary variables at the same time I removed the parameter. // <smpl> @r@ expression A,B,D,E; identifier C; @@ ( - drm_fb_helper_init(A,B,C,D) + drm_fb_helper_init(A,B,D) | - drm_fbdev_cma_init_with_funcs(A,B,C,D,E) + drm_fbdev_cma_init_with_funcs(A,B,D,E) | - drm_fbdev_cma_init(A,B,C,D) + drm_fbdev_cma_init(A,B,D) ) @@ expression A,B,C,D,E; @@ ( - drm_fb_helper_init(A,B,C,D) + drm_fb_helper_init(A,B,D) | - drm_fbdev_cma_init_with_funcs(A,B,C,D,E) + drm_fbdev_cma_init_with_funcs(A,B,D,E) | - drm_fbdev_cma_init(A,B,C,D) + drm_fbdev_cma_init(A,B,D) ) @@ identifier r.C; type T; expression V; @@ - T C; <... when != C - C = V; ...> // </smpl> Changes since v1: - Rebased on top of the tip of drm-misc-next. - Remove mention to sti since a proper fix got merged. Suggested-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170202162640.27261-1-krisman@collabora.co.uk
2017-02-02drm: Provide a driver hook for drm_dev_release()Chris Wilson2-20/+58
Some state is coupled into the device lifetime outside of the load/unload timeframe and requires teardown during final unreference from drm_dev_release(). For example, dmabufs hold both a device and module reference and may live longer than expected (i.e. the current pattern of the driver tearing down its state and then releasing a reference to the drm device) and yet touch driver private state when destroyed. v2: Export drm_dev_fini() and move the responsibility for finalizing the drm_device and freeing it to the release callback. (If no callback is provided, the core will call drm_dev_fini() and kfree(dev) as before.) v3: Remember to add drm_dev_fini() to drm_drv.h v4: Tidy language for kerneldoc v5: Cross reference from drm_dev_init() to note that driver->release() allows for arbitrary embedding. v6: Refer to driver data rather than driver state, as state is now becoming associated with the struct drm_atomic_state and friends. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [danvet: Use the proper reference for struct members, which is &drm_driver.release.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170202093632.31017-1-chris@chris-wilson.co.uk
2017-02-02drm: meson: rename driver name to meson-drmNeil Armstrong1-2/+1
The platform driver name is currently "meson" which can lead to some confusion, this patch renames it to "meson-drm" and removes the owner attribute since is always added by __platform_driver_register called by the module_platform_driver() macro. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Daniel Vetter <daniel@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1486028864-19622-3-git-send-email-narmstrong@baylibre.com
2017-02-02drm: meson: rename module name to meson-drmNeil Armstrong1-3/+3
The module is currently named "meson.ko" which can lead to some confusion, this patches renames it "meson-drm.ko" Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1486028864-19622-2-git-send-email-narmstrong@baylibre.com
2017-02-02drm/bridge/sii8620: enable interlace modesAndrzej Hajda1-3/+0
Bug in DECON(CRTC) driver prevented interlace modes from proper work. Since DECON is fixed interlace modes can be enabled in MHL. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-26-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: enable MHL3 mode if possibleAndrzej Hajda1-11/+12
Since all sub-protocols of MHL3 are already supported MHL3 mode can be enabled. With this patch it is possible to use packed pixel modes and clocks up to 300MHz - 1920x1080@60Hz and 4K modes. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-25-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: add HSIC initialization codeAndrzej Hajda2-4/+44
In case of MHL3 HSIC should be initialized. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-24-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: improve gen2 write burst IRQ routineAndrzej Hajda1-1/+20
The patch adds code to report back feature complete IRQ, and code to read and drop burst writes from peer. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-23-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: send EMSC features on requestAndrzej Hajda2-12/+31
Device should report to the peer which features are really supported. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-22-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: rewrite hdmi start sequenceAndrzej Hajda2-33/+262
MHL3 protocol requires registry adjustments depending on chosen video mode. Necessary information is gathered in mode_fixup callback. In case of HDMI video modes driver should also send special AVI and MHL3 infoframes. The patch introduces generic helpers for handling MHL3 infoframes, in case of appearance of other users of MHL3 infoframes these function can be moved to common library. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-21-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/mhl: add MHL3 infoframe related definitionsAndrzej Hajda1-0/+32
MHL3 protocol uses vendor specific infoframes to transmit additional information to the sink. This patch adds definitions of structures and constants used to create such frames. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-20-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: fix disconnect sequenceAndrzej Hajda1-1/+3
The patch allows to avoid rare cases when discovery fails. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-19-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: split EDID read and write codeAndrzej Hajda1-4/+27
MHL3 requires that after reading EDID from the sink source should ask peer for features. To make both protocols happy the patch splits the code accordingly. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-18-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: add delay during cbus resetAndrzej Hajda1-5/+4
Without delay CBUS sometimes was not reset properly. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-17-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: do not stop MHL output when TMDS input is stoppedAndrzej Hajda1-13/+0
Stopping output causes full re-detection of the sink and slows down the process. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-16-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: set gen2 write burst before sending MSC commandAndrzej Hajda1-38/+50
Write burst should be enabled for MHL_INT_RC_FEAT_REQ and disabled for other commands. The patch moves functions up and adds delay setting for MHL3 burst mode. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-15-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: abstract out sink detection codeAndrzej Hajda1-15/+20
MHL1 and MHL3 have different initialization paths. To make both protocols happy sink detection is put into continuation after link mode enablement. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-14-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: fix initialization sequence for MHL2 receiversAndrzej Hajda1-2/+1
MHL2 receiver require disabling transmitter on initialization. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-13-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: fix MSC message removalAndrzej Hajda1-1/+1
Messages queue can be cleaned up by message callbacks, to avoid repeated removal of current message it should be removed from the queue before calling these callbacks. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-12-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: remove spare CBUS bring-up sequenceAndrzej Hajda1-4/+0
In case of MHL3 CBUS is bring-up already in sii8620_got_ecbus_speed. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-11-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: fix peer device capabilities read codeAndrzej Hajda1-1/+11
Peer capabilities should be read differently depending on protocol version. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-10-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: respond to feature requestsAndrzej Hajda1-0/+4
MHL3 protocol requires device to respond to feature request from peer. This minimal answer fulfills the requirement and allows to continue negotiation. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-9-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: add support for burst eMSC transmissionsAndrzej Hajda2-1/+197
Burst transmissions are used in MHL3 mode negotiation. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-8-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/mhl: add write burst related definitionsAndrzej Hajda1-0/+53
Burst transmissions are required in MHL3 modes. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-7-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: initial support for eCBUS-S modeAndrzej Hajda2-2/+107
The Single-ended eCBUS Mode (eCBUS-S) mode provides 60 Mb/s full-duplex bidirectional traffic for three channels: - CBUS data (CBUS1 channel), - High-bandwidth MHL data (eMSC channel), - tunneling data (T-CBUS channel). It is required to fully support MHL3 dongles. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-6-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: add continuations to messagesAndrzej Hajda1-0/+20
Due to asynchronous nature of MHL flow of execution is dispersed. Logical continuation of some actions happens after response of peer, i.e in interrupt handler. To simplify coding continuation mechanism has been added - it is now possible to provide continuation callback, which will be called after peer responds to given action. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-5-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: add reading device capability registersAndrzej Hajda1-0/+35
This functionality is necessary to implement MHL3 modes. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-4-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: add MHL3 mode check helperAndrzej Hajda1-2/+7
MHL3 modes differs significantly from MHL1 mode, this helper will be used frequently to clearly distinguish them. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-3-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: simplify MHL3 mode settingAndrzej Hajda1-6/+2
It is not necessary to set REG_COC_CTL0, REG_MHL_COC_CTL1 registers. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-2-git-send-email-a.hajda@samsung.com
2017-02-02drm/etnaviv: Remove duplicate header file includeLiviu Dudau1-1/+0
etnaviv_gem.h header gets included twice. Remove duplicate. Signed-off-by: Liviu Dudau <liviu@dudau.co.uk> Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
2017-02-02Revert "drm/etnaviv: trick drm_mm into giving out a low IOVA"Lucas Stach1-6/+1
Now that commandstreams are handled through the cmdbuf suballocator the workaround to make the IOVA games work is not needed anymore. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2017-02-02drm/etnaviv: add cmdbuf suballocatorLucas Stach7-58/+165
There are 3 big benefits to suballocating a single big DMA buffer for command submission: 1. Avoid hammering CMA. The old way of allocating and freeing a DMA buffer for each submission was hitting some of the real slow pathes in CMA, as this allocator was not designed for a concurrent small buffers load. 2. Less TLB flushes on IOMMUv2. If a new command buffer is mapped into the GPU address space the MMU TLBs need to be flushed. By having one big buffer statically mapped to the GPU, a lot of those flushes can be avoided. 3. No funky workarounds for GC3000. The FE TLB flush on GC3000 isn't reliable. To work around that we tried to lay out the cmdbufs in the GPU address space in a way to avoid this issue. This hasn't always worked if the address space is crowded. A single statically mapped buffer avoids the erratum completely. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2017-02-02drm/etnaviv: get cmdbuf physical address through the cmdbuf abstractionLucas Stach4-2/+10
Don't allow IOMMUv2 to peek directly into the cmdbuf, but get the needed PA through a dedicated function. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2017-02-02drm/etnaviv: wire up iova handling in new cmdbuf abstractionLucas Stach5-11/+18
Don't call the IOMMU directly, but go through the new cmdbuf abstraction. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2017-02-02drm/etnaviv: move cmdbuf de-/allocation into own fileLucas Stach11-66/+117
This will get more complex with the following changes, so move it into its own place. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2017-02-02drm/etnaviv: always flush MMU TLBs on map/unmapLucas Stach1-4/+3
This ensures that the GPU isn't able to write into already freed objects, as doing this in the IOVA reaper isn't enough, as the gem_free_object path will also cause unmaps to happen. On MMUv2 this also ensures that stale entries, which may have been prefetched into the TLB will be purged. The flush is low overhead, as it gets batched up with the next user command buffer, so this isn't incuring an overhead for each buffer map/unmap. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2017-02-02drm/etnaviv: constify etnaviv_iommu_ops structuresBhumika Goyal2-2/+2
Declare etnaviv_iommu_ops structure as const as it is only used when the reference of one of its field is stored in the ops field of a iommu_domain structure. This ops field is of type const, so etnaviv_iommu_ops structures having similar properties can be declared const too. Done using Coccinelle. Before and after size details of .o file remains the same after cross compiling for arm architecture. lst: Trimmed commit message, apply the same change to iommu_v2. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
2017-02-02drm: qxl: Embed drm_device into driver structureGabriel Krisman Bertazi10-57/+52
This is the recommended way to create the drm_device structure, according to DRM documentation. Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170127010548.27970-4-krisman@collabora.co.uk Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-02-02drm: qxl: Drop duplicated pci_device pointer attributeGabriel Krisman Bertazi3-3/+1
qxl_device duplicates the pointer to struct pci_dev, which is not needed since we already have it in the drm_device structure. Clean it up. Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170127010548.27970-3-krisman@collabora.co.uk Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-02-02drm: qxl: Drop duplicated device pointer attributeGabriel Krisman Bertazi4-14/+12
qxl_device duplicates a pointer to struct device, which is not needed since we already have it in the drm_device structure. Clean it up. Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170127010548.27970-2-krisman@collabora.co.uk Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-04 06:33:01 +0300