| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In nfp_flower_spawn_phy_reprs, in the for loop over eth_tbl if any of
intermediate allocations or initializations fail memory is leaked.
requiered releases are added.
Fixes: b94524529741 ("nfp: flower: add per repr private data for LAG offload")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This a new feature, it is preferred that it defaults to N.
We will probe the feature support from userspace before actually using it.
Fixes: 95a7233c452a ('net: openvswitch: Set OvS recirc_id from tc chain index')
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A user reported that vrf create fails when IPv6 is disabled at boot using
'ipv6.disable=1':
https://bugzilla.kernel.org/show_bug.cgi?id=204903
The failure is adding fib rules at create time. Add RTNL_FAMILY_IP6MR to
the check in vrf_fib_rule if ipv6_mod_enabled is disabled.
Fixes: e4a38c0c4b27 ("ipv6: add vrf table handling code for ipv6 mcast")
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Patrick Ruddy <pruddy@vyatta.att-mail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull NTB updates from Jon Mason:
"A few bugfixes and support for new AMD NTB hardware"
* tag 'ntb-5.4' of git://github.com/jonmason/ntb:
NTB: fix IDT Kconfig typos/spellos
ntb_hw_amd: Add memory window support for new AMD hardware
ntb_hw_amd: Add a new NTB PCI device ID
NTB: ntb_transport: remove redundant assignment to rc
ntb_hw_switchtec: make ntb_mw_set_trans() work when addr == 0
ntb: point to right memory window index
|
|
To address a major procedural concern on Linus's part the keyrings needs
a co-maintainer.
Suggested-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2019-09-27
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix libbpf's BTF dumper to not skip anonymous enum definitions, from Andrii.
2) Fix BTF verifier issues when handling the BTF of vmlinux, from Alexei.
3) Fix nested calls into bpf_event_output() from TCP sockops BPF
programs, from Allan.
4) Fix NULL pointer dereference in AF_XDP's xsk map creation when
allocation fails, from Jonathan.
5) Remove unneeded 64 byte alignment requirement of the AF_XDP UMEM
headroom, from Bjorn.
6) Remove unused XDP_OPTIONS getsockopt() call which results in an error
on older kernels, from Toke.
7) Fix a client/server race in tcp_rtt BPF kselftest case, from Stanislav.
8) Fix indentation issue in BTF's btf_enum_check_kflag_member(), from Colin.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
[BUG]
The following script can cause btrfs qgroup data space leak:
mkfs.btrfs -f $dev
mount $dev -o nospace_cache $mnt
btrfs subv create $mnt/subv
btrfs quota en $mnt
btrfs quota rescan -w $mnt
btrfs qgroup limit 128m $mnt/subv
for (( i = 0; i < 3; i++)); do
# Create 3 64M holes for latter fallocate to fail
truncate -s 192m $mnt/subv/file
xfs_io -c "pwrite 64m 4k" $mnt/subv/file > /dev/null
xfs_io -c "pwrite 128m 4k" $mnt/subv/file > /dev/null
sync
# it's supposed to fail, and each failure will leak at least 64M
# data space
xfs_io -f -c "falloc 0 192m" $mnt/subv/file &> /dev/null
rm $mnt/subv/file
sync
done
# Shouldn't fail after we removed the file
xfs_io -f -c "falloc 0 64m" $mnt/subv/file
[CAUSE]
Btrfs qgroup data reserve code allow multiple reservations to happen on
a single extent_changeset:
E.g:
btrfs_qgroup_reserve_data(inode, &data_reserved, 0, SZ_1M);
btrfs_qgroup_reserve_data(inode, &data_reserved, SZ_1M, SZ_2M);
btrfs_qgroup_reserve_data(inode, &data_reserved, 0, SZ_4M);
Btrfs qgroup code has its internal tracking to make sure we don't
double-reserve in above example.
The only pattern utilizing this feature is in the main while loop of
btrfs_fallocate() function.
However btrfs_qgroup_reserve_data()'s error handling has a bug in that
on error it clears all ranges in the io_tree with EXTENT_QGROUP_RESERVED
flag but doesn't free previously reserved bytes.
This bug has a two fold effect:
- Clearing EXTENT_QGROUP_RESERVED ranges
This is the correct behavior, but it prevents
btrfs_qgroup_check_reserved_leak() to catch the leakage as the
detector is purely EXTENT_QGROUP_RESERVED flag based.
- Leak the previously reserved data bytes.
The bug manifests when N calls to btrfs_qgroup_reserve_data are made and
the last one fails, leaking space reserved in the previous ones.
[FIX]
Also free previously reserved data bytes when btrfs_qgroup_reserve_data
fails.
Fixes: 524725537023 ("btrfs: qgroup: Introduce btrfs_qgroup_reserve_data function")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
Under the following case with qgroup enabled, if some error happened
after we have reserved delalloc space, then in error handling path, we
could cause qgroup data space leakage:
From btrfs_truncate_block() in inode.c:
ret = btrfs_delalloc_reserve_space(inode, &data_reserved,
block_start, blocksize);
if (ret)
goto out;
again:
page = find_or_create_page(mapping, index, mask);
if (!page) {
btrfs_delalloc_release_space(inode, data_reserved,
block_start, blocksize, true);
btrfs_delalloc_release_extents(BTRFS_I(inode), blocksize, true);
ret = -ENOMEM;
goto out;
}
[CAUSE]
In the above case, btrfs_delalloc_reserve_space() will call
btrfs_qgroup_reserve_data() and mark the io_tree range with
EXTENT_QGROUP_RESERVED flag.
In the error handling path, we have the following call stack:
btrfs_delalloc_release_space()
|- btrfs_free_reserved_data_space()
|- btrsf_qgroup_free_data()
|- __btrfs_qgroup_release_data(reserved=@reserved, free=1)
|- qgroup_free_reserved_data(reserved=@reserved)
|- clear_record_extent_bits();
|- freed += changeset.bytes_changed;
However due to a completion bug, qgroup_free_reserved_data() will clear
EXTENT_QGROUP_RESERVED flag in BTRFS_I(inode)->io_failure_tree, other
than the correct BTRFS_I(inode)->io_tree.
Since io_failure_tree is never marked with that flag,
btrfs_qgroup_free_data() will not free any data reserved space at all,
causing a leakage.
This type of error handling can only be triggered by errors outside of
qgroup code. So EDQUOT error from qgroup can't trigger it.
[FIX]
Fix the wrong target io_tree.
Reported-by: Josef Bacik <josef@toxicpanda.com>
Fixes: bc42bda22345 ("btrfs: qgroup: Fix qgroup reserved space underflow by only freeing reserved ranges")
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We got a null pointer deference BUG_ON in blk_mq_rq_timed_out()
as following:
[ 108.825472] BUG: kernel NULL pointer dereference, address: 0000000000000040
[ 108.827059] PGD 0 P4D 0
[ 108.827313] Oops: 0000 [#1] SMP PTI
[ 108.827657] CPU: 6 PID: 198 Comm: kworker/6:1H Not tainted 5.3.0-rc8+ #431
[ 108.829503] Workqueue: kblockd blk_mq_timeout_work
[ 108.829913] RIP: 0010:blk_mq_check_expired+0x258/0x330
[ 108.838191] Call Trace:
[ 108.838406] bt_iter+0x74/0x80
[ 108.838665] blk_mq_queue_tag_busy_iter+0x204/0x450
[ 108.839074] ? __switch_to_asm+0x34/0x70
[ 108.839405] ? blk_mq_stop_hw_queue+0x40/0x40
[ 108.839823] ? blk_mq_stop_hw_queue+0x40/0x40
[ 108.840273] ? syscall_return_via_sysret+0xf/0x7f
[ 108.840732] blk_mq_timeout_work+0x74/0x200
[ 108.841151] process_one_work+0x297/0x680
[ 108.841550] worker_thread+0x29c/0x6f0
[ 108.841926] ? rescuer_thread+0x580/0x580
[ 108.842344] kthread+0x16a/0x1a0
[ 108.842666] ? kthread_flush_work+0x170/0x170
[ 108.843100] ret_from_fork+0x35/0x40
The bug is caused by the race between timeout handle and completion for
flush request.
When timeout handle function blk_mq_rq_timed_out() try to read
'req->q->mq_ops', the 'req' have completed and reinitiated by next
flush request, which would call blk_rq_init() to clear 'req' as 0.
After commit 12f5b93145 ("blk-mq: Remove generation seqeunce"),
normal requests lifetime are protected by refcount. Until 'rq->ref'
drop to zero, the request can really be free. Thus, these requests
cannot been reused before timeout handle finish.
However, flush request has defined .end_io and rq->end_io() is still
called even if 'rq->ref' doesn't drop to zero. After that, the 'flush_rq'
can be reused by the next flush request handle, resulting in null
pointer deference BUG ON.
We fix this problem by covering flush request with 'rq->ref'.
If the refcount is not zero, flush_end_io() return and wait the
last holder recall it. To record the request status, we add a new
entry 'rq_status', which will be used in flush_end_io().
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: stable@vger.kernel.org # v4.18+
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
-------
v2:
- move rq_status from struct request to struct blk_flush_queue
v3:
- remove unnecessary '{}' pair.
v4:
- let spinlock to protect 'fq->rq_status'
v5:
- move rq_status after flush_running_idx member of struct blk_flush_queue
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Vlad Buslov says:
====================
Fix Qdisc destroy issues caused by adding fine-grained locking to filter API
TC filter API unlocking introduced several new fine-grained locks. The
change caused sleeping-while-atomic BUGs in several Qdiscs that call cls
APIs which need to obtain new mutex while holding sch tree spinlock. This
series fixes affected Qdiscs by ensuring that cls API that became sleeping
is only called outside of sch tree lock critical section.
====================
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Recent changes that removed rtnl dependency from rules update path of tc
also made tcf_block_put() function sleeping. This function is called from
ops->destroy() of several Qdisc implementations, which in turn is called by
qdisc_put(). Some Qdiscs call qdisc_put() while holding sch tree spinlock,
which results sleeping-while-atomic BUG.
Steps to reproduce for sfb:
tc qdisc add dev ens1f0 handle 1: root sfb
tc qdisc add dev ens1f0 parent 1:10 handle 50: sfq perturb 10
tc qdisc change dev ens1f0 root handle 1: sfb
Resulting dmesg:
[ 7265.938717] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:909
[ 7265.940152] in_atomic(): 1, irqs_disabled(): 0, pid: 28579, name: tc
[ 7265.941455] INFO: lockdep is turned off.
[ 7265.942744] CPU: 11 PID: 28579 Comm: tc Tainted: G W 5.3.0-rc8+ #721
[ 7265.944065] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017
[ 7265.945396] Call Trace:
[ 7265.946709] dump_stack+0x85/0xc0
[ 7265.947994] ___might_sleep.cold+0xac/0xbc
[ 7265.949282] __mutex_lock+0x5b/0x960
[ 7265.950543] ? tcf_chain0_head_change_cb_del.isra.0+0x1b/0xf0
[ 7265.951803] ? tcf_chain0_head_change_cb_del.isra.0+0x1b/0xf0
[ 7265.953022] tcf_chain0_head_change_cb_del.isra.0+0x1b/0xf0
[ 7265.954248] tcf_block_put_ext.part.0+0x21/0x50
[ 7265.955478] tcf_block_put+0x50/0x70
[ 7265.956694] sfq_destroy+0x15/0x50 [sch_sfq]
[ 7265.957898] qdisc_destroy+0x5f/0x160
[ 7265.959099] sfb_change+0x175/0x330 [sch_sfb]
[ 7265.960304] tc_modify_qdisc+0x324/0x840
[ 7265.961503] rtnetlink_rcv_msg+0x170/0x4b0
[ 7265.962692] ? netlink_deliver_tap+0x95/0x400
[ 7265.963876] ? rtnl_dellink+0x2d0/0x2d0
[ 7265.965064] netlink_rcv_skb+0x49/0x110
[ 7265.966251] netlink_unicast+0x171/0x200
[ 7265.967427] netlink_sendmsg+0x224/0x3f0
[ 7265.968595] sock_sendmsg+0x5e/0x60
[ 7265.969753] ___sys_sendmsg+0x2ae/0x330
[ 7265.970916] ? ___sys_recvmsg+0x159/0x1f0
[ 7265.972074] ? do_wp_page+0x9c/0x790
[ 7265.973233] ? __handle_mm_fault+0xcd3/0x19e0
[ 7265.974407] __sys_sendmsg+0x59/0xa0
[ 7265.975591] do_syscall_64+0x5c/0xb0
[ 7265.976753] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 7265.977938] RIP: 0033:0x7f229069f7b8
[ 7265.979117] Code: 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 65 8f 0c 00 8b 00 85 c0 75 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83 ec 28 89 5
4
[ 7265.981681] RSP: 002b:00007ffd7ed2d158 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[ 7265.983001] RAX: ffffffffffffffda RBX: 000000005d813ca1 RCX: 00007f229069f7b8
[ 7265.984336] RDX: 0000000000000000 RSI: 00007ffd7ed2d1c0 RDI: 0000000000000003
[ 7265.985682] RBP: 0000000000000000 R08: 0000000000000001 R09: 000000000165c9a0
[ 7265.987021] R10: 0000000000404eda R11: 0000000000000246 R12: 0000000000000001
[ 7265.988309] R13: 000000000047f640 R14: 0000000000000000 R15: 0000000000000000
In sfb_change() function use qdisc_purge_queue() instead of
qdisc_tree_flush_backlog() to properly reset old child Qdisc and save
pointer to it into local temporary variable. Put reference to Qdisc after
sch tree lock is released in order not to call potentially sleeping cls API
in atomic section. This is safe to do because Qdisc has already been reset
by qdisc_purge_queue() inside sch tree lock critical section.
Reported-by: syzbot+ac54455281db908c581e@syzkaller.appspotmail.com
Fixes: c266f64dbfa2 ("net: sched: protect block state with mutex")
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Recent changes that removed rtnl dependency from rules update path of tc
also made tcf_block_put() function sleeping. This function is called from
ops->destroy() of several Qdisc implementations, which in turn is called by
qdisc_put(). Some Qdiscs call qdisc_put() while holding sch tree spinlock,
which results sleeping-while-atomic BUG.
Steps to reproduce for multiq:
tc qdisc add dev ens1f0 root handle 1: multiq
tc qdisc add dev ens1f0 parent 1:10 handle 50: sfq perturb 10
ethtool -L ens1f0 combined 2
tc qdisc change dev ens1f0 root handle 1: multiq
Resulting dmesg:
[ 5539.419344] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:909
[ 5539.420945] in_atomic(): 1, irqs_disabled(): 0, pid: 27658, name: tc
[ 5539.422435] INFO: lockdep is turned off.
[ 5539.423904] CPU: 21 PID: 27658 Comm: tc Tainted: G W 5.3.0-rc8+ #721
[ 5539.425400] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017
[ 5539.426911] Call Trace:
[ 5539.428380] dump_stack+0x85/0xc0
[ 5539.429823] ___might_sleep.cold+0xac/0xbc
[ 5539.431262] __mutex_lock+0x5b/0x960
[ 5539.432682] ? tcf_chain0_head_change_cb_del.isra.0+0x1b/0xf0
[ 5539.434103] ? __nla_validate_parse+0x51/0x840
[ 5539.435493] ? tcf_chain0_head_change_cb_del.isra.0+0x1b/0xf0
[ 5539.436903] tcf_chain0_head_change_cb_del.isra.0+0x1b/0xf0
[ 5539.438327] tcf_block_put_ext.part.0+0x21/0x50
[ 5539.439752] tcf_block_put+0x50/0x70
[ 5539.441165] sfq_destroy+0x15/0x50 [sch_sfq]
[ 5539.442570] qdisc_destroy+0x5f/0x160
[ 5539.444000] multiq_tune+0x14a/0x420 [sch_multiq]
[ 5539.445421] tc_modify_qdisc+0x324/0x840
[ 5539.446841] rtnetlink_rcv_msg+0x170/0x4b0
[ 5539.448269] ? netlink_deliver_tap+0x95/0x400
[ 5539.449691] ? rtnl_dellink+0x2d0/0x2d0
[ 5539.451116] netlink_rcv_skb+0x49/0x110
[ 5539.452522] netlink_unicast+0x171/0x200
[ 5539.453914] netlink_sendmsg+0x224/0x3f0
[ 5539.455304] sock_sendmsg+0x5e/0x60
[ 5539.456686] ___sys_sendmsg+0x2ae/0x330
[ 5539.458071] ? ___sys_recvmsg+0x159/0x1f0
[ 5539.459461] ? do_wp_page+0x9c/0x790
[ 5539.460846] ? __handle_mm_fault+0xcd3/0x19e0
[ 5539.462263] __sys_sendmsg+0x59/0xa0
[ 5539.463661] do_syscall_64+0x5c/0xb0
[ 5539.465044] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 5539.466454] RIP: 0033:0x7f1fe08177b8
[ 5539.467863] Code: 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 65 8f 0c 00 8b 00 85 c0 75 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83 ec 28 89 5
4
[ 5539.470906] RSP: 002b:00007ffe812de5d8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[ 5539.472483] RAX: ffffffffffffffda RBX: 000000005d8135e3 RCX: 00007f1fe08177b8
[ 5539.474069] RDX: 0000000000000000 RSI: 00007ffe812de640 RDI: 0000000000000003
[ 5539.475655] RBP: 0000000000000000 R08: 0000000000000001 R09: 000000000182e9b0
[ 5539.477203] R10: 0000000000404eda R11: 0000000000000246 R12: 0000000000000001
[ 5539.478699] R13: 000000000047f640 R14: 0000000000000000 R15: 0000000000000000
Rearrange locking in multiq_tune() in following ways:
- In loop that removes Qdiscs from disabled queues, call
qdisc_purge_queue() instead of qdisc_tree_flush_backlog() on Qdisc that
is being destroyed. Save the Qdisc in temporary allocated array and call
qdisc_put() on each element of the array after sch tree lock is released.
This is safe to do because Qdiscs have already been reset by
qdisc_purge_queue() inside sch tree lock critical section.
- Do the same change for second loop that initializes Qdiscs for newly
enabled queues in multiq_tune() function. Since sch tree lock is obtained
and released on each iteration of this loop, just call qdisc_put()
directly outside of critical section. Don't verify that old Qdisc is not
noop_qdisc before releasing reference to it because such check is already
performed by qdisc_put*() functions.
Fixes: c266f64dbfa2 ("net: sched: protect block state with mutex")
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Recent changes that removed rtnl dependency from rules update path of tc
also made tcf_block_put() function sleeping. This function is called from
ops->destroy() of several Qdisc implementations, which in turn is called by
qdisc_put(). Some Qdiscs call qdisc_put() while holding sch tree spinlock,
which results sleeping-while-atomic BUG.
Steps to reproduce for htb:
tc qdisc add dev ens1f0 root handle 1: htb default 12
tc class add dev ens1f0 parent 1: classid 1:1 htb rate 100kbps ceil 100kbps
tc qdisc add dev ens1f0 parent 1:1 handle 40: sfq perturb 10
tc class add dev ens1f0 parent 1:1 classid 1:2 htb rate 100kbps ceil 100kbps
Resulting dmesg:
[ 4791.148551] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:909
[ 4791.151354] in_atomic(): 1, irqs_disabled(): 0, pid: 27273, name: tc
[ 4791.152805] INFO: lockdep is turned off.
[ 4791.153605] CPU: 19 PID: 27273 Comm: tc Tainted: G W 5.3.0-rc8+ #721
[ 4791.154336] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017
[ 4791.155075] Call Trace:
[ 4791.155803] dump_stack+0x85/0xc0
[ 4791.156529] ___might_sleep.cold+0xac/0xbc
[ 4791.157251] __mutex_lock+0x5b/0x960
[ 4791.157966] ? console_unlock+0x363/0x5d0
[ 4791.158676] ? tcf_chain0_head_change_cb_del.isra.0+0x1b/0xf0
[ 4791.159395] ? tcf_chain0_head_change_cb_del.isra.0+0x1b/0xf0
[ 4791.160103] tcf_chain0_head_change_cb_del.isra.0+0x1b/0xf0
[ 4791.160815] tcf_block_put_ext.part.0+0x21/0x50
[ 4791.161530] tcf_block_put+0x50/0x70
[ 4791.162233] sfq_destroy+0x15/0x50 [sch_sfq]
[ 4791.162936] qdisc_destroy+0x5f/0x160
[ 4791.163642] htb_change_class.cold+0x5df/0x69d [sch_htb]
[ 4791.164505] tc_ctl_tclass+0x19d/0x480
[ 4791.165360] rtnetlink_rcv_msg+0x170/0x4b0
[ 4791.166191] ? netlink_deliver_tap+0x95/0x400
[ 4791.166907] ? rtnl_dellink+0x2d0/0x2d0
[ 4791.167625] netlink_rcv_skb+0x49/0x110
[ 4791.168345] netlink_unicast+0x171/0x200
[ 4791.169058] netlink_sendmsg+0x224/0x3f0
[ 4791.169771] sock_sendmsg+0x5e/0x60
[ 4791.170475] ___sys_sendmsg+0x2ae/0x330
[ 4791.171183] ? ___sys_recvmsg+0x159/0x1f0
[ 4791.171894] ? do_wp_page+0x9c/0x790
[ 4791.172595] ? __handle_mm_fault+0xcd3/0x19e0
[ 4791.173309] __sys_sendmsg+0x59/0xa0
[ 4791.174024] do_syscall_64+0x5c/0xb0
[ 4791.174725] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 4791.175435] RIP: 0033:0x7f0aa41497b8
[ 4791.176129] Code: 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 65 8f 0c 00 8b 00 85 c0 75 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83 ec 28 89 5
4
[ 4791.177532] RSP: 002b:00007fff4e37d588 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[ 4791.178243] RAX: ffffffffffffffda RBX: 000000005d8132f7 RCX: 00007f0aa41497b8
[ 4791.178947] RDX: 0000000000000000 RSI: 00007fff4e37d5f0 RDI: 0000000000000003
[ 4791.179662] RBP: 0000000000000000 R08: 0000000000000001 R09: 00000000020149a0
[ 4791.180382] R10: 0000000000404eda R11: 0000000000000246 R12: 0000000000000001
[ 4791.181100] R13: 000000000047f640 R14: 0000000000000000 R15: 0000000000000000
In htb_change_class() function save parent->leaf.q to local temporary
variable and put reference to it after sch tree lock is released in order
not to call potentially sleeping cls API in atomic section. This is safe to
do because Qdisc has already been reset by qdisc_purge_queue() inside sch
tree lock critical section.
Fixes: c266f64dbfa2 ("net: sched: protect block state with mutex")
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In rds_bind(), laddr_check is called without checking if it is NULL or
not. And rs_transport should be reset if rds_add_bound() fails.
Fixes: c5c1a030a7db ("net/rds: An rds_sock is added too early to the hash table")
Reported-by: syzbot+fae39afd2101a17ec624@syzkaller.appspotmail.com
Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Eric Dumazet says:
====================
tcp: provide correct skb->priority
SO_PRIORITY socket option requests TCP egress packets
to contain a user provided value.
TCP manages to send most packets with the requested values,
notably for TCP_ESTABLISHED state, but fails to do so for
few packets.
These packets are control packets sent on behalf
of SYN_RECV or TIME_WAIT states.
Note that to test this with packetdrill, it is a bit
of a hassle, since packetdrill can not verify priority
of egress packets, other than indirect observations,
using for example sch_prio on its tunnel device.
The bad skb priorities cause problems for GCP,
as this field is one of the keys used in routing.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ctl packets sent on behalf of TIME_WAIT sockets currently
have a zero skb->priority, which can cause various problems.
In this patch we :
- add a tw_priority field in struct inet_timewait_sock.
- populate it from sk->sk_priority when a TIME_WAIT is created.
- For IPv4, change ip_send_unicast_reply() and its two
callers to propagate tw_priority correctly.
ip_send_unicast_reply() no longer changes sk->sk_priority.
- For IPv6, make sure TIME_WAIT sockets pass their tw_priority
field to tcp_v6_send_response() and tcp_v6_send_ack().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We can populate skb->priority for some ctl packets
instead of always using zero.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, ip6_xmit() sets skb->priority based on sk->sk_priority
This is not desirable for TCP since TCP shares the same ctl socket
for a given netns. We want to be able to send RST or ACK packets
with a non zero skb->priority.
This patch has no functional change.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
BPF_PROG_TYPE_SOCK_OPS program can reenter bpf_event_output because it
can be called from atomic and non-atomic contexts since we don't have
bpf_prog_active to prevent it happen.
This patch enables 3 levels of nesting to support normal, irq and nmi
context.
We can easily reproduce the issue by running netperf crr mode with 100
flows and 10 threads from netperf client side.
Here is the whole stack dump:
[ 515.228898] WARNING: CPU: 20 PID: 14686 at kernel/trace/bpf_trace.c:549 bpf_event_output+0x1f9/0x220
[ 515.228903] CPU: 20 PID: 14686 Comm: tcp_crr Tainted: G W 4.15.0-smp-fixpanic #44
[ 515.228904] Hardware name: Intel TBG,ICH10/Ikaria_QC_1b, BIOS 1.22.0 06/04/2018
[ 515.228905] RIP: 0010:bpf_event_output+0x1f9/0x220
[ 515.228906] RSP: 0018:ffff9a57ffc03938 EFLAGS: 00010246
[ 515.228907] RAX: 0000000000000012 RBX: 0000000000000001 RCX: 0000000000000000
[ 515.228907] RDX: 0000000000000000 RSI: 0000000000000096 RDI: ffffffff836b0f80
[ 515.228908] RBP: ffff9a57ffc039c8 R08: 0000000000000004 R09: 0000000000000012
[ 515.228908] R10: ffff9a57ffc1de40 R11: 0000000000000000 R12: 0000000000000002
[ 515.228909] R13: ffff9a57e13bae00 R14: 00000000ffffffff R15: ffff9a57ffc1e2c0
[ 515.228910] FS: 00007f5a3e6ec700(0000) GS:ffff9a57ffc00000(0000) knlGS:0000000000000000
[ 515.228910] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 515.228911] CR2: 0000537082664fff CR3: 000000061fed6002 CR4: 00000000000226f0
[ 515.228911] Call Trace:
[ 515.228913] <IRQ>
[ 515.228919] [<ffffffff82c6c6cb>] bpf_sockopt_event_output+0x3b/0x50
[ 515.228923] [<ffffffff8265daee>] ? bpf_ktime_get_ns+0xe/0x10
[ 515.228927] [<ffffffff8266fda5>] ? __cgroup_bpf_run_filter_sock_ops+0x85/0x100
[ 515.228930] [<ffffffff82cf90a5>] ? tcp_init_transfer+0x125/0x150
[ 515.228933] [<ffffffff82cf9159>] ? tcp_finish_connect+0x89/0x110
[ 515.228936] [<ffffffff82cf98e4>] ? tcp_rcv_state_process+0x704/0x1010
[ 515.228939] [<ffffffff82c6e263>] ? sk_filter_trim_cap+0x53/0x2a0
[ 515.228942] [<ffffffff82d90d1f>] ? tcp_v6_inbound_md5_hash+0x6f/0x1d0
[ 515.228945] [<ffffffff82d92160>] ? tcp_v6_do_rcv+0x1c0/0x460
[ 515.228947] [<ffffffff82d93558>] ? tcp_v6_rcv+0x9f8/0xb30
[ 515.228951] [<ffffffff82d737c0>] ? ip6_route_input+0x190/0x220
[ 515.228955] [<ffffffff82d5f7ad>] ? ip6_protocol_deliver_rcu+0x6d/0x450
[ 515.228958] [<ffffffff82d60246>] ? ip6_rcv_finish+0xb6/0x170
[ 515.228961] [<ffffffff82d5fb90>] ? ip6_protocol_deliver_rcu+0x450/0x450
[ 515.228963] [<ffffffff82d60361>] ? ipv6_rcv+0x61/0xe0
[ 515.228966] [<ffffffff82d60190>] ? ipv6_list_rcv+0x330/0x330
[ 515.228969] [<ffffffff82c4976b>] ? __netif_receive_skb_one_core+0x5b/0xa0
[ 515.228972] [<ffffffff82c497d1>] ? __netif_receive_skb+0x21/0x70
[ 515.228975] [<ffffffff82c4a8d2>] ? process_backlog+0xb2/0x150
[ 515.228978] [<ffffffff82c4aadf>] ? net_rx_action+0x16f/0x410
[ 515.228982] [<ffffffff830000dd>] ? __do_softirq+0xdd/0x305
[ 515.228986] [<ffffffff8252cfdc>] ? irq_exit+0x9c/0xb0
[ 515.228989] [<ffffffff82e02de5>] ? smp_call_function_single_interrupt+0x65/0x120
[ 515.228991] [<ffffffff82e020e1>] ? call_function_single_interrupt+0x81/0x90
[ 515.228992] </IRQ>
[ 515.228996] [<ffffffff82a11ff0>] ? io_serial_in+0x20/0x20
[ 515.229000] [<ffffffff8259c040>] ? console_unlock+0x230/0x490
[ 515.229003] [<ffffffff8259cbaa>] ? vprintk_emit+0x26a/0x2a0
[ 515.229006] [<ffffffff8259cbff>] ? vprintk_default+0x1f/0x30
[ 515.229008] [<ffffffff8259d9f5>] ? vprintk_func+0x35/0x70
[ 515.229011] [<ffffffff8259d4bb>] ? printk+0x50/0x66
[ 515.229013] [<ffffffff82637637>] ? bpf_event_output+0xb7/0x220
[ 515.229016] [<ffffffff82c6c6cb>] ? bpf_sockopt_event_output+0x3b/0x50
[ 515.229019] [<ffffffff8265daee>] ? bpf_ktime_get_ns+0xe/0x10
[ 515.229023] [<ffffffff82c29e87>] ? release_sock+0x97/0xb0
[ 515.229026] [<ffffffff82ce9d6a>] ? tcp_recvmsg+0x31a/0xda0
[ 515.229029] [<ffffffff8266fda5>] ? __cgroup_bpf_run_filter_sock_ops+0x85/0x100
[ 515.229032] [<ffffffff82ce77c1>] ? tcp_set_state+0x191/0x1b0
[ 515.229035] [<ffffffff82ced10e>] ? tcp_disconnect+0x2e/0x600
[ 515.229038] [<ffffffff82cecbbb>] ? tcp_close+0x3eb/0x460
[ 515.229040] [<ffffffff82d21082>] ? inet_release+0x42/0x70
[ 515.229043] [<ffffffff82d58809>] ? inet6_release+0x39/0x50
[ 515.229046] [<ffffffff82c1f32d>] ? __sock_release+0x4d/0xd0
[ 515.229049] [<ffffffff82c1f3e5>] ? sock_close+0x15/0x20
[ 515.229052] [<ffffffff8273b517>] ? __fput+0xe7/0x1f0
[ 515.229055] [<ffffffff8273b66e>] ? ____fput+0xe/0x10
[ 515.229058] [<ffffffff82547bf2>] ? task_work_run+0x82/0xb0
[ 515.229061] [<ffffffff824086df>] ? exit_to_usermode_loop+0x7e/0x11f
[ 515.229064] [<ffffffff82408171>] ? do_syscall_64+0x111/0x130
[ 515.229067] [<ffffffff82e0007c>] ? entry_SYSCALL_64_after_hwframe+0x3d/0xa2
Fixes: a5a3a828cd00 ("bpf: add perf event notificaton support for sock_ops")
Signed-off-by: Allan Zhang <allanzhang@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20190925234312.94063-2-allanzhang@google.com
|
|
The CPU port does not have a PHY connected to it. So calling
phy_support_asym_pause() results in an Opps. As with other DSA
drivers, add a guard that the port is a user port.
Reported-by: Michal Vokáč <michal.vokac@ysoft.com>
Fixes: 0394a63acfe2 ("net: dsa: enable and disable all ports")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
qdisc_root() use from netem_enqueue() triggers a lockdep warning.
__dev_queue_xmit() uses rcu_read_lock_bh() which is
not equivalent to rcu_read_lock() + local_bh_disable_bh as far
as lockdep is concerned.
WARNING: suspicious RCU usage
5.3.0-rc7+ #0 Not tainted
-----------------------------
include/net/sch_generic.h:492 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
3 locks held by syz-executor427/8855:
#0: 00000000b5525c01 (rcu_read_lock_bh){....}, at: lwtunnel_xmit_redirect include/net/lwtunnel.h:92 [inline]
#0: 00000000b5525c01 (rcu_read_lock_bh){....}, at: ip_finish_output2+0x2dc/0x2570 net/ipv4/ip_output.c:214
#1: 00000000b5525c01 (rcu_read_lock_bh){....}, at: __dev_queue_xmit+0x20a/0x3650 net/core/dev.c:3804
#2: 00000000364bae92 (&(&sch->q.lock)->rlock){+.-.}, at: spin_lock include/linux/spinlock.h:338 [inline]
#2: 00000000364bae92 (&(&sch->q.lock)->rlock){+.-.}, at: __dev_xmit_skb net/core/dev.c:3502 [inline]
#2: 00000000364bae92 (&(&sch->q.lock)->rlock){+.-.}, at: __dev_queue_xmit+0x14b8/0x3650 net/core/dev.c:3838
stack backtrace:
CPU: 0 PID: 8855 Comm: syz-executor427 Not tainted 5.3.0-rc7+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x172/0x1f0 lib/dump_stack.c:113
lockdep_rcu_suspicious+0x153/0x15d kernel/locking/lockdep.c:5357
qdisc_root include/net/sch_generic.h:492 [inline]
netem_enqueue+0x1cfb/0x2d80 net/sched/sch_netem.c:479
__dev_xmit_skb net/core/dev.c:3527 [inline]
__dev_queue_xmit+0x15d2/0x3650 net/core/dev.c:3838
dev_queue_xmit+0x18/0x20 net/core/dev.c:3902
neigh_hh_output include/net/neighbour.h:500 [inline]
neigh_output include/net/neighbour.h:509 [inline]
ip_finish_output2+0x1726/0x2570 net/ipv4/ip_output.c:228
__ip_finish_output net/ipv4/ip_output.c:308 [inline]
__ip_finish_output+0x5fc/0xb90 net/ipv4/ip_output.c:290
ip_finish_output+0x38/0x1f0 net/ipv4/ip_output.c:318
NF_HOOK_COND include/linux/netfilter.h:294 [inline]
ip_mc_output+0x292/0xf40 net/ipv4/ip_output.c:417
dst_output include/net/dst.h:436 [inline]
ip_local_out+0xbb/0x190 net/ipv4/ip_output.c:125
ip_send_skb+0x42/0xf0 net/ipv4/ip_output.c:1555
udp_send_skb.isra.0+0x6b2/0x1160 net/ipv4/udp.c:887
udp_sendmsg+0x1e96/0x2820 net/ipv4/udp.c:1174
inet_sendmsg+0x9e/0xe0 net/ipv4/af_inet.c:807
sock_sendmsg_nosec net/socket.c:637 [inline]
sock_sendmsg+0xd7/0x130 net/socket.c:657
___sys_sendmsg+0x3e2/0x920 net/socket.c:2311
__sys_sendmmsg+0x1bf/0x4d0 net/socket.c:2413
__do_sys_sendmmsg net/socket.c:2442 [inline]
__se_sys_sendmmsg net/socket.c:2439 [inline]
__x64_sys_sendmmsg+0x9d/0x100 net/socket.c:2439
do_syscall_64+0xfd/0x6a0 arch/x86/entry/common.c:296
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After commit a2c11b034142 ("kcm: use BPF_PROG_RUN")
syzbot easily triggers the warning in cant_sleep().
As explained in commit 6cab5e90ab2b ("bpf: run bpf programs
with preemption disabled") we need to disable preemption before
running bpf programs.
BUG: assuming atomic context at net/kcm/kcmsock.c:382
in_atomic(): 0, irqs_disabled(): 0, pid: 7, name: kworker/u4:0
3 locks held by kworker/u4:0/7:
#0: ffff888216726128 ((wq_completion)kstrp){+.+.}, at: __write_once_size include/linux/compiler.h:226 [inline]
#0: ffff888216726128 ((wq_completion)kstrp){+.+.}, at: arch_atomic64_set arch/x86/include/asm/atomic64_64.h:34 [inline]
#0: ffff888216726128 ((wq_completion)kstrp){+.+.}, at: atomic64_set include/asm-generic/atomic-instrumented.h:855 [inline]
#0: ffff888216726128 ((wq_completion)kstrp){+.+.}, at: atomic_long_set include/asm-generic/atomic-long.h:40 [inline]
#0: ffff888216726128 ((wq_completion)kstrp){+.+.}, at: set_work_data kernel/workqueue.c:620 [inline]
#0: ffff888216726128 ((wq_completion)kstrp){+.+.}, at: set_work_pool_and_clear_pending kernel/workqueue.c:647 [inline]
#0: ffff888216726128 ((wq_completion)kstrp){+.+.}, at: process_one_work+0x88b/0x1740 kernel/workqueue.c:2240
#1: ffff8880a989fdc0 ((work_completion)(&strp->work)){+.+.}, at: process_one_work+0x8c1/0x1740 kernel/workqueue.c:2244
#2: ffff888098998d10 (sk_lock-AF_INET){+.+.}, at: lock_sock include/net/sock.h:1522 [inline]
#2: ffff888098998d10 (sk_lock-AF_INET){+.+.}, at: strp_sock_lock+0x2e/0x40 net/strparser/strparser.c:440
CPU: 0 PID: 7 Comm: kworker/u4:0 Not tainted 5.3.0+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: kstrp strp_work
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x172/0x1f0 lib/dump_stack.c:113
__cant_sleep kernel/sched/core.c:6826 [inline]
__cant_sleep.cold+0xa4/0xbc kernel/sched/core.c:6803
kcm_parse_func_strparser+0x54/0x200 net/kcm/kcmsock.c:382
__strp_recv+0x5dc/0x1b20 net/strparser/strparser.c:221
strp_recv+0xcf/0x10b net/strparser/strparser.c:343
tcp_read_sock+0x285/0xa00 net/ipv4/tcp.c:1639
strp_read_sock+0x14d/0x200 net/strparser/strparser.c:366
do_strp_work net/strparser/strparser.c:414 [inline]
strp_work+0xe3/0x130 net/strparser/strparser.c:423
process_one_work+0x9af/0x1740 kernel/workqueue.c:2269
Fixes: a2c11b034142 ("kcm: use BPF_PROG_RUN")
Fixes: 6cab5e90ab2b ("bpf: run bpf programs with preemption disabled")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The "gmac->phy_mode" variable is an enum and in this context GCC will
treat it as an unsigned int so the error handling will never be
triggered.
Fixes: b1c17215d718 ("stmmac: add ipq806x glue layer")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The "priv->phy_mode" is an enum and in this context GCC will treat it
as an unsigned int so it can never be less than zero.
Fixes: 492caffa8a1a ("net: ethernet: nixge: Add support for National Instruments XGE netdev")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The "iface" variable is an enum and in this context GCC treats it as
an unsigned int so the error handling is never triggered.
Fixes: b78624125304 ("of_mdio: Abstract a general interface for phy connect")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The "lp->phy_mode" is an enum but in this context GCC treats it as an
unsigned int so the error handling is never triggered.
Fixes: ee06b1728b95 ("net: axienet: add support for standard phy-mode binding")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The "dwmac->phy_mode" is an enum and in this context GCC treats it as
an unsigned int so the error handling is never triggered.
Fixes: 566e82516253 ("net: stmmac: add a glue driver for the Amlogic Meson 8b / GXBB DWMAC")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The "phy_mode" variable is an enum and in this context GCC treats it as
an unsigned int so the error handling is never triggered.
Fixes: 4c270b55a5af ("net: ethernet: socionext: add AVE ethernet driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The "priv->if_mode" is type phy_interface_t which is an enum. In this
context GCC will treat the enum as an unsigned int so this error
handling is never triggered.
Fixes: d4fd0404c1c9 ("enetc: Introduce basic PF and VF ENETC ethernet drivers")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The "priv->phy_interface" variable is an enum and in this context GCC
will treat it as an unsigned int so the error handling is never
triggered.
Fixes: 533dd11a12f6 ("net: socionext: Add Synquacer NetSec driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The "priv->phy_interface" variable is an enum and in this context GCC
will treat it as unsigned so the error handling will never be
triggered.
Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The "priv->phy_mode" variable is an enum and in this context GCC will
treat it as unsigned to the error handling will never trigger.
Fixes: 57c5bc9ad7d7 ("net: hisilicon: add hix5hd2 mac driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The "chip" variable is an enum, and it's treated as unsigned int by GCC
in this context so the error handling isn't triggered.
Fixes: e8d452923ae6 ("cxgb4: clean up init_one")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The irqreturn_t type is an enum or an unsigned int in GCC. That
creates to problems because it can't detect if the
self->aq_hw_ops->hw_irq_read() call fails and at the end the function
always returns IRQ_HANDLED.
drivers/net/ethernet/aquantia/atlantic/aq_vec.c:316 aq_vec_isr_legacy() warn: unsigned 'err' is never less than zero.
drivers/net/ethernet/aquantia/atlantic/aq_vec.c:329 aq_vec_isr_legacy() warn: always true condition '(err >= 0) => (0-u32max >= 0)'
Fixes: 970a2e9864b0 ("net: ethernet: aquantia: Vector operations")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
According to Tal Gilboa the only benefit from DIM comes from a driver
that uses it. So it doesn't make sense to make this symbol user visible,
instead all drivers that use it should select it (as is already the case
AFAICT).
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We have updated limits after calling wbt_set_min_lat(). No need to
update again.
Reviewed-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
s/CONFIG_IOV/CONFIG_PCI_IOV/
Whoops.
Fixes: bd6461cc7b3c ("powerpc/eeh: Add a eeh_dev_break debugfs interface")
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
[mpe: Fixup the #endif comment as well]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190926122502.14826-1-oohall@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Ingo Molnar:
"Fix a timer expiry bug that would cause spurious delay of timers"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timer: Read jiffies once when forwarding base clk
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull more perf updates from Ingo Molnar:
"The only kernel change is comment typo fixes.
The rest is mostly tooling fixes, but also new vendor event additions
and updates, a bigger libperf/libtraceevent library and a header files
reorganization that came in a bit late"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (108 commits)
perf unwind: Fix libunwind build failure on i386 systems
perf parser: Remove needless include directives
perf build: Add detection of java-11-openjdk-devel package
perf jvmti: Include JVMTI support for s390
perf vendor events: Remove P8 HW events which are not supported
perf evlist: Fix access of freed id arrays
perf stat: Fix free memory access / memory leaks in metrics
perf tools: Replace needless mmap.h with what is needed, event.h
perf evsel: Move config terms to a separate header
perf evlist: Remove unused perf_evlist__fprintf() method
perf evsel: Introduce evsel_fprintf.h
perf evsel: Remove need for symbol_conf in evsel_fprintf.c
perf copyfile: Move copyfile routines to separate files
libperf: Add perf_evlist__poll() function
libperf: Add perf_evlist__add_pollfd() function
libperf: Add perf_evlist__alloc_pollfd() function
libperf: Add libperf_init() call to the tests
libperf: Merge libperf_set_print() into libperf_init()
libperf: Add libperf dependency for tests targets
libperf: Use sys/types.h to get ssize_t, not unistd.h
...
|
|
There may be situations when a server negotiates SMB 2.1
protocol version or higher but responds to a CREATE request
with an oplock rather than a lease.
Currently the client doesn't handle such a case correctly:
when another CREATE comes in the server sends an oplock
break to the initial CREATE and the client doesn't send
an ack back due to a wrong caching level being set (READ
instead of RWH). Missing an oplock break ack makes the
server wait until the break times out which dramatically
increases the latency of the second CREATE.
Fix this by properly detecting oplocks when using SMB 2.1
protocol version and higher.
Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
|
|
Various SMB3 ACL related flags (for security descriptor and
ACEs for example) were missing and some fields are different
in SMB3 and CIFS. Update cifsacl.h definitions based on
current MS-DTYP specification.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"Srikar Dronamraju fixed a bug in the newmulti probe code"
* tag 'trace-v5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing/probe: Fix same probe event argument matching
|
|
Naresh Kamboju reported, that on the i386 build pr_err()
doesn't get defined properly due to header ordering:
perf-in.o: In function `libunwind__x86_reg_id':
tools/perf/util/libunwind/../../arch/x86/util/unwind-libunwind.c:109:
undefined reference to `pr_err'
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull usercopy fix from Kees Cook:
"Fix hardened usercopy under CONFIG_DEBUG_VIRTUAL"
* tag 'usercopy-v5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
usercopy: Avoid HIGHMEM pfn warning
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest updates from Shuah Khan:
"Fixes to existing tests"
* tag 'linux-kselftest-5.4-rc1.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: tpm2: install python files
selftests: livepatch: add missing fragments to config
selftests: watchdog: cleanup whitespace in usage options
selftest/ftrace: Fix typo in trigger-snapshot.tc
selftests: watchdog: Add optional file argument
selftests/seccomp: fix build on older kernels
selftests: use "$(MAKE)" instead of "make"
|
|
Pull NFS client updates from Anna Schumaker:
"Stable bugfixes:
- Dequeue the request from the receive queue while we're re-encoding
# v4.20+
- Fix buffer handling of GSS MIC without slack # 5.1
Features:
- Increase xprtrdma maximum transport header and slot table sizes
- Add support for nfs4_call_sync() calls using a custom
rpc_task_struct
- Optimize the default readahead size
- Enable pNFS filelayout LAYOUTGET on OPEN
Other bugfixes and cleanups:
- Fix possible null-pointer dereferences and memory leaks
- Various NFS over RDMA cleanups
- Various NFS over RDMA comment updates
- Don't receive TCP data into a reset request buffer
- Don't try to parse incomplete RPC messages
- Fix congestion window race with disconnect
- Clean up pNFS return-on-close error handling
- Fixes for NFS4ERR_OLD_STATEID handling"
* tag 'nfs-for-5.4-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (53 commits)
pNFS/filelayout: enable LAYOUTGET on OPEN
NFS: Optimise the default readahead size
NFSv4: Handle NFS4ERR_OLD_STATEID in LOCKU
NFSv4: Handle NFS4ERR_OLD_STATEID in CLOSE/OPEN_DOWNGRADE
NFSv4: Fix OPEN_DOWNGRADE error handling
pNFS: Handle NFS4ERR_OLD_STATEID on layoutreturn by bumping the state seqid
NFSv4: Add a helper to increment stateid seqids
NFSv4: Handle RPC level errors in LAYOUTRETURN
NFSv4: Handle NFS4ERR_DELAY correctly in return-on-close
NFSv4: Clean up pNFS return-on-close error handling
pNFS: Ensure we do clear the return-on-close layout stateid on fatal errors
NFS: remove unused check for negative dentry
NFSv3: use nfs_add_or_obtain() to create and reference inodes
NFS: Refactor nfs_instantiate() for dentry referencing callers
SUNRPC: Fix congestion window race with disconnect
SUNRPC: Don't try to parse incomplete RPC messages
SUNRPC: Rename xdr_buf_read_netobj to xdr_buf_read_mic
SUNRPC: Fix buffer handling of GSS MIC without slack
SUNRPC: RPC level errors should always set task->tk_rpc_status
SUNRPC: Don't receive TCP data into a request buffer that has been reset
...
|
|
When brk was moved for binaries without an interpreter, it should have
been limited to ET_DYN only. In other words, the special case was an
ET_DYN that lacks an INTERP, not just an executable that lacks INTERP.
The bug manifested for giant static executables, where the brk would end
up in the middle of the text area on 32-bit architectures.
Reported-and-tested-by: Richard Kojedzinszky <richard@kojedz.in>
Fixes: bbdc6076d2e5 ("binfmt_elf: move brk out of mmap when doing direct loader exec")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull xfs fixes from Darrick Wong:
"There are a couple of bug fixes and some small code cleanups that came
in recently:
- Minor code cleanups
- Fix a superblock logging error
- Ensure that collapse range converts the data fork to extents format
when necessary
- Revert the ALLOC_USERDATA cleanup because it caused subtle behavior
regressions"
* tag 'xfs-5.4-merge-8' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: avoid unused to_mp() function warning
xfs: log proper length of superblock
xfs: revert 1baa2800e62d ("xfs: remove the unused XFS_ALLOC_USERDATA flag")
xfs: removed unneeded variable
xfs: convert inode to extent format after extent merge due to shift
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull jffs2 fix from Al Viro:
"braino fix for mount API conversion for jffs2"
* 'work.mount3' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
jffs2: Fix mounting under new mount API
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Vasily Gorbik:
- Fix three kasan findings
- Add PERF_EVENT_IOC_PERIOD ioctl support
- Add Crypto Express7S support and extend sysfs attributes for pkey
- Minor common I/O layer documentation corrections
* tag 's390-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/cio: exclude subchannels with no parent from pseudo check
s390/cio: avoid calling strlen on null pointer
s390/topology: avoid firing events before kobjs are created
s390/cpumf: Remove mixed white space
s390/cpum_sf: Support ioctl PERF_EVENT_IOC_PERIOD
s390/zcrypt: CEX7S exploitation support
s390/cio: fix intparm documentation
s390/pkey: Add sysfs attributes to emit AES CIPHER key blobs
|
