Age | Commit message (Expand) | Author | Files | Lines |
2014-02-09 | ARM: dts: imx27-phytec-phycore-som: Add spi-cs-high property to PMIC | Alexander Shiyan | 1 | -1/+2 |
2014-02-09 | ARM: dts: imx27-phytec-phycore-rdk: Enable 1-Wire module | Alexander Shiyan | 1 | -0/+12 |
2014-02-09 | ARM: dts: imx27-phytec-phycore-som: Add NFC pin group | Alexander Shiyan | 1 | -0/+14 |
2014-02-09 | ARM: dts: Add support for the i.MX35. | Steffen Trumtrar | 1 | -0/+359 |
2014-02-09 | ARM: dts: mxs: Add iio-hwmon to mx23 soc | Alexandre Belloni | 1 | -1/+6 |
2014-02-09 | ARM: dts: mxs: Add iio-hwmon to mx28 soc | Alexandre Belloni | 1 | -0/+5 |
2014-02-09 | ARM: dts: imx27-phytec-phycore-som: Rename file to .dtsi | Alexander Shiyan | 3 | -2/+1 |
2014-02-09 | ARM: dts: imx27-phytec-phycore-som: Add pinctrl for CSPI1 and GPIOs used on m... | Alexander Shiyan | 1 | -0/+12 |
2014-02-09 | ARM: dts: mxs: add #io-channel-cells to mx28 lradc | Alexandre Belloni | 1 | -0/+1 |
2014-02-09 | ARM: i.MX28: dts: rename usbphy pin names | Michael Grzeschik | 8 | -11/+11 |
2014-02-09 | ARM: dts: Add support for the cpuimx25 board from Eukrea and its baseboard. | Denis Carikli | 3 | -0/+248 |
2014-02-09 | ARM: mxs: Add support for the eukrea-cpuimx28. | Eric BĂ©nard | 5 | -0/+456 |
2014-02-09 | ARM: dts: mxs: Add a new pin config for the usb0 ID. | Denis Carikli | 1 | -0/+11 |
2014-02-09 | ARM: dts: mxs: Add 18bit pin config for lcdif. | Denis Carikli | 1 | -0/+27 |
2014-02-09 | ARM: dts: imx53: Enable AHCI SATA for imx53-qsb | Robert Nelson | 1 | -0/+4 |
2014-02-09 | ARM: dts: i.MX27: Configure GPIOs as "input" by default | Alexander Shiyan | 1 | -192/+192 |
2014-02-09 | ARM: dts: imx27-apf27dev: Add pinctrl for cspi, sdhci, leds and keys | Gwenhael Goavec-Merou | 1 | -3/+31 |
2014-02-09 | ARM: dts: apf27dev: Add pwm support | Gwenhael Goavec-Merou | 1 | -0/+11 |
2014-02-09 | ARM: imx28: add apf28 specific initialization (macaddr) | Gwenhael Goavec-Merou | 1 | -0/+13 |
2014-02-09 | ARM: dts: apf28dev: set gpio polarity for usb regulator and pinctrl for regul... | Gwenhael Goavec-Merou | 1 | -0/+13 |
2014-02-09 | ARM: dts: i.MX27 boards: Switch to use standard GPIO and IRQ flags definitions | Alexander Shiyan | 6 | -16/+20 |
2014-02-09 | ARM: dts: imx27-phytec-phycore-som: Update FEC node | Alexander Shiyan | 1 | -0/+16 |
2014-02-09 | ARM: dts: imx27-phytec-phycore-rdk: Add DT node for camera module | Alexander Shiyan | 1 | -0/+22 |
2014-02-09 | ARM: dts: imx27-phytec-phycore-som: Add on-flash BBT support | Alexander Shiyan | 1 | -0/+1 |
2014-02-09 | ARM: dts: imx27: imx27-apf27dev: add pinctrl for cspi, i2c, sdhc and framebuffer | Gwenhael Goavec-Merou | 1 | -0/+89 |
2014-02-09 | ARM: dts: imx27: imx27-apf27: add pinctrl for fec and uart1 | Gwenhael Goavec-Merou | 1 | -0/+38 |
2014-02-09 | ARM: dts: imx51-babbage: Define FEC reset pin | Alexander Shiyan | 1 | -0/+3 |
2014-02-09 | ARM: dts: imx51-babbage: Fix chipselect level for dataflash on spi0.1 | Alexander Shiyan | 1 | -1/+1 |
2014-02-09 | ARM: dts: imx28-evk: Run I2C0 at 400kHz | Fabio Estevam | 1 | -0/+1 |
2014-02-09 | ARM: dts: imx27-apf27dev: fix display size | Gwenhael Goavec-Merou | 1 | -2/+2 |
2014-02-09 | ARM: dts: imx27 phycore pinctrl | Markus Pargmann | 2 | -0/+65 |
2014-02-09 | ARM: dts: imx27 phycore move uart1 to rdk | Markus Pargmann | 2 | -4/+1 |
2014-02-09 | ARM: dts: imx27 phyCARD-S pinctrl | Markus Pargmann | 3 | -0/+93 |
2014-02-09 | ARM: dts: imx27 iomux device node | Markus Pargmann | 1 | -58/+66 |
2014-02-09 | ARM: dts: imx53: Enable AHCI SATA for M53EVK | Marek Vasut | 1 | -0/+4 |
2014-02-09 | ARM: dts: imx53: Add AHCI SATA DT node | Marek Vasut | 1 | -0/+11 |
2014-02-09 | ARM: dts: i.MX51 boards: Switch to use standard GPIO flags definitions | Alexander Shiyan | 4 | -11/+15 |
2014-02-09 | ARM: dts: i.MX51: Move usbphy0 node from AIPS1 | Alexander Shiyan | 1 | -7/+13 |
2014-02-09 | ARM: dts: cfa10036: Add dr_mode and phy_type properties to the DT | Maxime Ripard | 1 | -0/+2 |
2014-02-09 | ARM: mxs: cfa10049: Add NAU7802 ADCs to the device tree | Maxime Ripard | 1 | -0/+24 |
2014-02-09 | ARM: dts: imx53: Add USB support for M53EVK | Marek Vasut | 1 | -0/+22 |
2014-02-09 | ARM: dts: imx53: Fix backlight for M53EVK | Marek Vasut | 1 | -2/+12 |
2014-02-09 | ARM: dts: imx53: Fix display pinmux for M53EVK | Marek Vasut | 1 | -12/+34 |
2014-02-09 | ARM: imx50: use clock defines in DTS files | Lucas Stach | 1 | -28/+51 |
2014-02-09 | ARM: imx51: use clock defines in DTS files | Lucas Stach | 1 | -37/+61 |
2014-02-09 | ARM: imx53: use clock defines in DTS files | Lucas Stach | 4 | -48/+80 |
2014-02-09 | ARM: dts: imx27 pin functions | Markus Pargmann | 1 | -0/+526 |
2014-02-09 | ARM: imx27-apf27dev: Add sdhci support | Gwenhael Goavec-Merou | 1 | -0/+6 |
2014-02-09 | ARM: dts: i.MX51: Switch to use standard IRQ flags definitions | Alexander Shiyan | 2 | -1/+2 |
2014-02-09 | ARM: dts: i.MX51: Add dummy clock to AUDMUX | Alexander Shiyan | 1 | -0/+2 |