summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2012-12-27ipv6/ip6_gre: set transport header correctlyIsaku Yamahata1-2/+1
ip6gre_xmit2() incorrectly sets transport header to inner payload instead of GRE header. It seems copy-and-pasted from ipip.c. Set transport header to gre header. (In ipip case the transport header is the inner ip header, so that's correct.) Found by inspection. In practice the incorrect transport header doesn't matter because the skb usually is sent to another net_device or socket, so the transport header isn't referenced. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-27ipv4/ip_gre: set transport header correctly to gre headerIsaku Yamahata1-1/+1
ipgre_tunnel_xmit() incorrectly sets transport header to inner payload instead of GRE header. It seems copy-and-pasted from ipip.c. So set transport header to gre header. (In ipip case the transport header is the inner ip header, so that's correct.) Found by inspection. In practice the incorrect transport header doesn't matter because the skb usually is sent to another net_device or socket, so the transport header isn't referenced. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-27IB/rds: suppress incompatible protocol when version is knownMarciniszyn, Mike1-6/+5
Add an else to only print the incompatible protocol message when version hasn't been established. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-27IB/rds: Correct ib_api use with gs_dma_address/sg_dma_lenMarciniszyn, Mike1-3/+6
0b088e00 ("RDS: Use page_remainder_alloc() for recv bufs") added uses of sg_dma_len() and sg_dma_address(). This makes RDS DOA with the qib driver. IB ulps should use ib_sg_dma_len() and ib_sg_dma_address respectively since some HCAs overload ib_sg_dma* operations. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-27net/vxlan: Use the underlying device index when joining/leaving multicast groupsYan Burman1-2/+4
The socket calls from vxlan to join/leave multicast group aren't using the index of the underlying device, as a result the stack uses the first interface that is up. This results in vxlan being non functional over a device which isn't the 1st to be up. Fix this by providing the iflink field to the vxlan instance to the multicast calls. Signed-off-by: Yan Burman <yanb@mellanox.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-27tcp: should drop incoming frames without ACK flag setEric Dumazet1-4/+10
In commit 96e0bf4b5193d (tcp: Discard segments that ack data not yet sent) John Dykstra enforced a check against ack sequences. In commit 354e4aa391ed5 (tcp: RFC 5961 5.2 Blind Data Injection Attack Mitigation) I added more safety tests. But we missed fact that these tests are not performed if ACK bit is not set. RFC 793 3.9 mandates TCP should drop a frame without ACK flag set. " fifth check the ACK field, if the ACK bit is off drop the segment and return" Not doing so permits an attacker to only guess an acceptable sequence number, evading stronger checks. Many thanks to Zhiyun Qian for bringing this issue to our attention. See : http://web.eecs.umich.edu/~zhiyunq/pub/ccs12_TCP_sequence_number_inference.pdf Reported-by: Zhiyun Qian <zhiyunq@umich.edu> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Nandita Dukkipati <nanditad@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: John Dykstra <john.dykstra1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-27mm: Fix PageHead when !CONFIG_PAGEFLAGS_EXTENDEDChristoffer Dall1-1/+7
Unfortunately with !CONFIG_PAGEFLAGS_EXTENDED, (!PageHead) is false, and (PageHead) is true, for tail pages. If this is indeed the intended behavior, which I doubt because it breaks cache cleaning on some ARM systems, then the nomenclature is highly problematic. This patch makes sure PageHead is only true for head pages and PageTail is only true for tail pages, and neither is true for non-compound pages. [ This buglet seems ancient - seems to have been introduced back in Apr 2008 in commit 6a1e7f777f61: "pageflags: convert to the use of new macros". And the reason nobody noticed is because the PageHead() tests are almost all about just sanity-checking, and only used on pages that are actual page heads. The fact that the old code returned true for tail pages too was thus not really noticeable. - Linus ] Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu> Acked-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Will Deacon <Will.Deacon@arm.com> Cc: Steve Capper <Steve.Capper@arm.com> Cc: Christoph Lameter <cl@linux.com> Cc: stable@kernel.org # 2.6.26+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-27netprio_cgroup: define sk_cgrp_prioidx only if NETPRIO_CGROUP is enabledLi Zefan1-1/+1
sock->sk_cgrp_prioidx won't be used at all if CONFIG_NETPRIO_CGROUP=n. Signed-off-by: Li Zefan <lizefan@huawei.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-27cpts: fix a run time warn_on.Richard Cochran1-1/+1
This patch fixes a warning in clk_enable by calling clk_prepare_enable instead. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-27cpts: fix build error by removing useless code.Richard Cochran2-2/+0
The cpts driver tries to obtain the input clock frequency by calling the clock's internal 'recalc' method. Since <plat/clock.h> has been removed, this code can no longer compile. However, the driver never makes use of the frequency value, so this patch fixes the issue by removing the offending code altogether. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-27batman-adv: fix random jitter calculationAkinobu Mita1-1/+1
batadv_iv_ogm_emit_send_time() attempts to calculates a random integer in the range of 'orig_interval +- BATADV_JITTER' by the below lines. msecs = atomic_read(&bat_priv->orig_interval) - BATADV_JITTER; msecs += (random32() % 2 * BATADV_JITTER); But it actually gets 'orig_interval' or 'orig_interval - BATADV_JITTER' because '%' and '*' have same precedence and associativity is left-to-right. This adds the parentheses at the appropriate position so that it matches original intension. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Antonio Quartulli <ordex@autistici.org> Cc: Marek Lindner <lindner_marek@yahoo.de> Cc: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Cc: Antonio Quartulli <ordex@autistici.org> Cc: b.a.t.m.a.n@lists.open-mesh.org Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-26PCI: Reduce Ricoh 0xe822 SD card reader base clock frequency to 50MHzAndy Lutomirski2-2/+6
Otherwise it fails like this on cards like the Transcend 16GB SDHC card: mmc0: new SDHC card at address b368 mmcblk0: mmc0:b368 SDC 15.0 GiB mmcblk0: error -110 sending status command, retrying mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0xb0 Tested on my Lenovo x200 laptop. [bhelgaas: changelog] Signed-off-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Chris Ball <cjb@laptop.org> CC: Manoj Iyer <manoj.iyer@canonical.com> CC: stable@vger.kernel.org
2012-12-26PCI/PM: Do not suspend port if any subordinate device needs PME pollingHuang Ying1-1/+19
Ulrich reported that his USB3 cardreader does not work reliably when connected to the USB3 port. It turns out that USB3 controller failed to awaken when plugging in the USB3 cardreader. Further experiments found that the USB3 host controller can only be awakened via polling, not via PME interrupt. But if the PCIe port to which the USB3 host controller is connected is suspended, we cannot poll the controller because its config space is not accessible when the PCIe port is in a low power state. To solve the issue, the PCIe port will not be suspended if any subordinate device needs PME polling. [bhelgaas: use bool consistently rather than mixing int/bool] Reference: http://lkml.kernel.org/r/50841CCC.9030809@uli-eckhardt.de Reported-by: Ulrich Eckhardt <usb@uli-eckhardt.de> Tested-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> CC: stable@vger.kernel.org # v3.6+
2012-12-26PCI: Add PCIe Link Capability link speed and width namesBjorn Helgaas1-0/+2
Add standard #defines for the Supported Link Speeds field in the PCIe Link Capabilities register. Note that prior to PCIe spec r3.0, these encodings were defined: 0001b 2.5GT/s Link speed supported 0010b 5.0GT/s and 2.5GT/s Link speed supported Starting with spec r3.0, these encodings refer to bits 0 and 1 in the Supported Link Speeds Vector in the Link Capabilities 2 register, and bits 0 and 1 there mean 2.5 GT/s and 5.0 GT/s, respectively. Therefore, code that followed r2.0 and interpreted 0x1 as 2.5GT/s and 0x2 as 5.0GT/s will continue to work, and we can identify a device using the new encodings because it will have a non-zero Link Capabilities 2 register. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-12-26PCI: Work around Stratus ftServer broken PCIe hierarchy (fix DMI check)Myron Stowe1-1/+2
Commit 284f5f9 was intended to disable the "only_one_child()" optimization on Stratus ftServer systems, but its DMI check is wrong. It looks for DMI_SYS_VENDOR that contains "ftServer", when it should look for DMI_SYS_VENDOR containing "Stratus" and DMI_PRODUCT_NAME containing "ftServer". Tested on Stratus ftServer 6400. Reported-by: Fadeeva Marina <astarta@rat.ru> Reference: https://bugzilla.kernel.org/show_bug.cgi?id=51331 Signed-off-by: Myron Stowe <myron.stowe@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v3.5+
2012-12-26PCI: Remove spurious error for sriov_numvfs store and simplify flowBjorn Helgaas1-51/+34
If we request "num_vfs" and the driver's sriov_configure() method enables exactly that number ("num_vfs_enabled"), we complain "Invalid value for number of VFs to enable" and return an error. We should silently return success instead. Also, use kstrtou16() since numVFs is defined to be a 16-bit field and rework to simplify control flow. Reported-by: Greg Rose <gregory.v.rose@intel.com> Reference: http://lkml.kernel.org/r/20121214101911.00002f59@unknown Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Donald Dutile <ddutile@redhat.com>
2012-12-26f2fs: Don't assign e_id in f2fs_acl_from_diskEric W. Biederman1-1/+0
With user namespaces enabled building f2fs fails with: CC fs/f2fs/acl.o fs/f2fs/acl.c: In function ‘f2fs_acl_from_disk’: fs/f2fs/acl.c:85:21: error: ‘struct posix_acl_entry’ has no member named ‘e_id’ make[2]: *** [fs/f2fs/acl.o] Error 1 make[2]: Target `__build' not remade because of errors. e_id is a backwards compatibility field only used for file systems that haven't been converted to use kuids and kgids. When the posix acl tag field is neither ACL_USER nor ACL_GROUP assigning e_id is unnecessary. Remove the assignment so f2fs will build with user namespaces enabled. Cc: Namjae Jeon <namjae.jeon@samsung.com> Cc: Amit Sahrawat <a.sahrawat@samsung.com> Acked-by: Jaegeuk Kim <jaegeuk.kim@samsung.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-12-26proc: Allow proc_free_inum to be called from any contextEric W. Biederman1-6/+7
While testing the pid namespace code I hit this nasty warning. [ 176.262617] ------------[ cut here ]------------ [ 176.263388] WARNING: at /home/eric/projects/linux/linux-userns-devel/kernel/softirq.c:160 local_bh_enable_ip+0x7a/0xa0() [ 176.265145] Hardware name: Bochs [ 176.265677] Modules linked in: [ 176.266341] Pid: 742, comm: bash Not tainted 3.7.0userns+ #18 [ 176.266564] Call Trace: [ 176.266564] [<ffffffff810a539f>] warn_slowpath_common+0x7f/0xc0 [ 176.266564] [<ffffffff810a53fa>] warn_slowpath_null+0x1a/0x20 [ 176.266564] [<ffffffff810ad9ea>] local_bh_enable_ip+0x7a/0xa0 [ 176.266564] [<ffffffff819308c9>] _raw_spin_unlock_bh+0x19/0x20 [ 176.266564] [<ffffffff8123dbda>] proc_free_inum+0x3a/0x50 [ 176.266564] [<ffffffff8111d0dc>] free_pid_ns+0x1c/0x80 [ 176.266564] [<ffffffff8111d195>] put_pid_ns+0x35/0x50 [ 176.266564] [<ffffffff810c608a>] put_pid+0x4a/0x60 [ 176.266564] [<ffffffff8146b177>] tty_ioctl+0x717/0xc10 [ 176.266564] [<ffffffff810aa4d5>] ? wait_consider_task+0x855/0xb90 [ 176.266564] [<ffffffff81086bf9>] ? default_spin_lock_flags+0x9/0x10 [ 176.266564] [<ffffffff810cab0a>] ? remove_wait_queue+0x5a/0x70 [ 176.266564] [<ffffffff811e37e8>] do_vfs_ioctl+0x98/0x550 [ 176.266564] [<ffffffff810b8a0f>] ? recalc_sigpending+0x1f/0x60 [ 176.266564] [<ffffffff810b9127>] ? __set_task_blocked+0x37/0x80 [ 176.266564] [<ffffffff810ab95b>] ? sys_wait4+0xab/0xf0 [ 176.266564] [<ffffffff811e3d31>] sys_ioctl+0x91/0xb0 [ 176.266564] [<ffffffff810a95f0>] ? task_stopped_code+0x50/0x50 [ 176.266564] [<ffffffff81939199>] system_call_fastpath+0x16/0x1b [ 176.266564] ---[ end trace 387af88219ad6143 ]--- It turns out that spin_unlock_bh(proc_inum_lock) is not safe when put_pid is called with another spinlock held and irqs disabled. For now take the easy path and use spin_lock_irqsave(proc_inum_lock) in proc_free_inum and spin_loc_irq in proc_alloc_inum(proc_inum_lock). Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-12-26pidns: Stop pid allocation when init diesEric W. Biederman4-4/+20
Oleg pointed out that in a pid namespace the sequence. - pid 1 becomes a zombie - setns(thepidns), fork,... - reaping pid 1. - The injected processes exiting. Can lead to processes attempting access their child reaper and instead following a stale pointer. That waitpid for init can return before all of the processes in the pid namespace have exited is also unfortunate. Avoid these problems by disabling the allocation of new pids in a pid namespace when init dies, instead of when the last process in a pid namespace is reaped. Pointed-out-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-12-25ext4: do not try to write superblock on ro remount w/o journalMichael Tokarev1-1/+1
When a journal-less ext4 filesystem is mounted on a read-only block device (blockdev --setro will do), each remount (for other, unrelated, flags, like suid=>nosuid etc) results in a series of scary messages from kernel telling about I/O errors on the device. This is becauese of the following code ext4_remount(): if (sbi->s_journal == NULL) ext4_commit_super(sb, 1); at the end of remount procedure, which forces writing (flushing) of a superblock regardless whenever it is dirty or not, if the filesystem is readonly or not, and whenever the device itself is readonly or not. We only need call ext4_commit_super when the file system had been previously mounted read/write. Thanks to Eric Sandeen for help in diagnosing this issue. Signed-off-By: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
2012-12-25ext4: include journal blocks in df overhead calcsEric Sandeen1-0/+4
To more accurately calculate overhead for "bsd" style df reporting, we should count the journal blocks as overhead as well. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Tested-by: Eric Whitney <enwlinux@gmail.com>
2012-12-25ext4: remove unaligned AIO warning printkEric Sandeen1-8/+0
Although I put this in, I now think it was a bad decision. For most users, there is very little to be done in this case. They get the message, once per day, with no real context or proposed action. TBH, it generates support calls when it probably does not need to; the message sounds more dire than the situation really is. Just nuke it. Normal investigation via blktrace or whatnot can reveal poor IO patterns if bad performance is encountered. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-25ext4: fix an incorrect comment about i_mutexAndy Lutomirski1-2/+0
i_mutex is not held when ->sync_file is called. Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-25ext4: fix deadlock in journal_unmap_buffer()Jan Kara3-25/+86
We cannot wait for transaction commit in journal_unmap_buffer() because we hold page lock which ranks below transaction start. We solve the issue by bailing out of journal_unmap_buffer() and jbd2_journal_invalidatepage() with -EBUSY. Caller is then responsible for waiting for transaction commit to finish and try invalidation again. Since the issue can happen only for page stradding i_size, it is simple enough to manually call jbd2_journal_invalidatepage() for such page from ext4_setattr(), check the return value and wait if necessary. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-25ext4: split off ext4_journalled_invalidatepage()Jan Kara2-8/+29
In data=journal mode we don't need delalloc or DIO handling in invalidatepage and similarly in other modes we don't need the journal handling. So split invalidatepage implementations. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-25pidns: Outlaw thread creation after unshare(CLONE_NEWPID)Eric W. Biederman1-0/+8
The sequence: unshare(CLONE_NEWPID) clone(CLONE_THREAD|CLONE_SIGHAND|CLONE_VM) Creates a new process in the new pid namespace without setting pid_ns->child_reaper. After forking this results in a NULL pointer dereference. Avoid this and other nonsense scenarios that can show up after creating a new pid namespace with unshare by adding a new check in copy_prodcess. Pointed-out-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-12-25arp: fix a regression in arp_solicit()Cong Wang1-3/+3
Sedat reported the following commit caused a regression: commit 9650388b5c56578fdccc79c57a8c82fb92b8e7f1 Author: Eric Dumazet <edumazet@google.com> Date: Fri Dec 21 07:32:10 2012 +0000 ipv4: arp: fix a lockdep splat in arp_solicit This is due to the 6th parameter of arp_send() needs to be NULL for the broadcast case, the above commit changed it to an all-zero array by mistake. Reported-by: Sedat Dilek <sedat.dilek@gmail.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Cc: Sedat Dilek <sedat.dilek@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Cc: David S. Miller <davem@davemloft.net> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-23Merge branch 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linuxLinus Torvalds54-247/+241
Pull i2c __dev* attribute removal from Wolfram Sang: "The squashed patches from Bill to get rid of the __dev* annotations in the i2c subsystem. I couldn't include it in my previous pull request due to some dependency with the mfd subsystem. I had this patch in linux-next for two days before rc1 and nothing popped up." * 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: i2c: remove __dev* attributes from subsystem
2012-12-23mm: modify pgdat_balanced() so that it also handles order-0Zlatko Calusic1-60/+45
Teach pgdat_balanced() about order-0 allocations so that we can simplify code in a few places in vmstat.c. Suggested-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Zlatko Calusic <zlatko.calusic@iskon.hr> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-23Partly revert "[media] uvcvideo: Set error_idx properly for extended ↵Rafael J. Wysocki2-18/+13
controls API failures" Commit f0ed2ce840b3 ("[media] uvcvideo: Set error_idx properly for extended controls API failures") causes user space to behave incorrectly on one of my test machines (there is no sound under KDE 4.9.4 using pulseaudio and there is a knotify4 process occupying one of the CPU cores 100% of the time). Reverting that commit entirely fixes the problem for me. However, commit f0ed2ce840b3 appears to do more than it follows from its changelog, because the changelog only says about the changes related to ctrls->error_idx, while the commit additionally changes error codes returned by various functions in uvc_ctrl.c and uvc_v4l2.c. It turns out that the changes of the returned error codes confuse the user spce, so it is sufficient to revert the part of commit f0ed2ce840b3 not mentioned in its changelog to fix the problem. [ 'ENOENT' is not a valid error return from an ioctl to begin with, and I don't understand how anybody ever even thought it would be. - Linus ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-23sunxi: Change the machine compatible string.Maxime Ripard1-2/+2
Commit 68136b10 ("ARM: sunxi: Change device tree naming scheme for sunxi") changed the naming scheme and the compatible strings used in the device trees related to the sunXi platform, but forgot to change the compatible string in the DT machine definition. This prevents the kernel from booting on these boards. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2012-12-23ARM: multi_v7_defconfig: Add ARCH_SUNXIMaxime Ripard1-0/+1
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2012-12-23drm/nve0/graph: fix fuc, and enable acceleration on all known chipsetsBen Skeggs5-86/+108
Also adds GK106 to chipsets known by ucode. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-12-23drm/nvc0/graph: fix fuc, and enable acceleration on GF119Ben Skeggs3-83/+85
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-12-23drm/nouveau/bios: cache ramcfg strap on later chipsetsBen Skeggs2-1/+18
This fixes suspend/resume on at least Quadro 400. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-12-23drm/nouveau/mxm: silence output if no bios dataBen Skeggs1-1/+1
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-12-23drm/nouveau/bios: parse/display extra version componentBen Skeggs2-2/+4
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-12-23drm/nouveau/bios: implement opcode 0xa9Ben Skeggs5-8/+53
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-12-23drm/nouveau/bios: update gpio parsing apis to match current designBen Skeggs5-61/+90
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-12-23drm/nouveau: initial support for GK106Ben Skeggs3-0/+30
Modesetting seems to work alright, as does graphics (using binary driver fuc from nve7...). Lots to be done no doubt, but this'll get an image on the screen for people. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-12-22i2c: remove __dev* attributes from subsystemBill Pemberton54-247/+241
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Peter Korsgaard <peter.korsgaard@barco.com> (for ocores and mux-gpio) Acked-by: Havard Skinnemoen <hskinnemoen@gmail.com> (for i2c-gpio) Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> (for puf3) Acked-by: Barry Song <baohua.song@csr.com> (for sirf) Reviewed-by: Jean Delvare <khali@linux-fr.org> [wsa: Fixed "foo* bar" flaws while we are here] Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-12-22hwmon: (emc6w201) Fix DIV_ROUND_CLOSEST problem with unsigned divisorsGuenter Roeck1-1/+1
Result of DIV_ROUND_CLOSEST is undefined for negative dividends if the divisor variable type is unsigned. Fix by declaring divisor as signed variable. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jean Delvare <khali@linux-fr.org>
2012-12-22net: sched: integer overflow fixStefan Hasko1-1/+1
Fixed integer overflow in function htb_dequeue Signed-off-by: Stefan Hasko <hasko.stevo@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-22CONFIG_HOTPLUG removal from networking coreGreg KH3-15/+0
CONFIG_HOTPLUG is always enabled now, so remove the unused code that was trying to be compiled out when this option was disabled, in the networking core. Cc: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-22Drivers: network: more __dev* removalGreg KH3-14/+13
Remove some __dev* markings that snuck in the 3.8-rc1 merge window in the drivers/net/* directory. Cc: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-22hwmon: (lm73} Detect and report i2c bus errorsChris Verges1-5/+11
If an LM73 device does not exist on an I2C bus, attempts to communicate with the device result in an error code returned from the i2c read/write functions. The current lm73 driver casts that return value from a s32 type to a s16 type, then converts it to a temperature in celsius. Because negative temperatures are valid, it is difficult to distinguish between an error code printed to the response buffer and a negative temperature recorded by the sensor. The solution is to evaluate the return value from the i2c functions before performing any temperature calculations. If the i2c function did not succeed, the error code should be passed back through the virtual file system layer instead of being printed into the response buffer. Before: $ cat /sys/class/hwmon/hwmon0/device/temp1_input -46 After: $ cat /sys/class/hwmon/hwmon0/device/temp1_input cat: read error: No such device or address Signed-off-by: Chris Verges <kg4ysn@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-12-22Linux 3.8-rc1v3.8-rc1Linus Torvalds1-2/+2
2012-12-22Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds19-445/+738
Pull watchdog updates from Wim Van Sebroeck: "This includes some fixes and code improvements (like clk_prepare_enable and clk_disable_unprepare), conversion from the omap_wdt and twl4030_wdt drivers to the watchdog framework, addition of the SB8x0 chipset support and the DA9055 Watchdog driver and some OF support for the davinci_wdt driver." * git://www.linux-watchdog.org/linux-watchdog: (22 commits) watchdog: mei: avoid oops in watchdog unregister code path watchdog: Orion: Fix possible null-deference in orion_wdt_probe watchdog: sp5100_tco: Add SB8x0 chipset support watchdog: davinci_wdt: add OF support watchdog: da9052: Fix invalid free of devm_ allocated data watchdog: twl4030_wdt: Change TWL4030_MODULE_PM_RECEIVER to TWL_MODULE_PM_RECEIVER watchdog: remove depends on CONFIG_EXPERIMENTAL watchdog: Convert dev_printk(KERN_<LEVEL> to dev_<level>( watchdog: DA9055 Watchdog driver watchdog: omap_wdt: eliminate goto watchdog: omap_wdt: delete redundant platform_set_drvdata() calls watchdog: omap_wdt: convert to devm_ functions watchdog: omap_wdt: convert to new watchdog core watchdog: WatchDog Timer Driver Core: fix comment watchdog: s3c2410_wdt: use clk_prepare_enable and clk_disable_unprepare watchdog: imx2_wdt: Select the driver via ARCH_MXC watchdog: cpu5wdt.c: add missing del_timer call watchdog: hpwdt.c: Increase version string watchdog: Convert twl4030_wdt to watchdog core davinci_wdt: preparation for switch to common clock framework ...
2012-12-22Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds4-17/+18
Pull CIFS fixes from Steve French: "Misc small cifs fixes" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: cifs: eliminate cifsERROR variable cifs: don't compare uniqueids in cifs_prime_dcache unless server inode numbers are in use cifs: fix double-free of "string" in cifs_parse_mount_options
2012-12-22Merge tag 'dm-3.8-fixes' of ↵Linus Torvalds30-443/+522
git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm Pull dm update from Alasdair G Kergon: "Miscellaneous device-mapper fixes, cleanups and performance improvements. Of particular note: - Disable broken WRITE SAME support in all targets except linear and striped. Use it when kcopyd is zeroing blocks. - Remove several mempools from targets by moving the data into the bio's new front_pad area(which dm calls 'per_bio_data'). - Fix a race in thin provisioning if discards are misused. - Prevent userspace from interfering with the ioctl parameters and use kmalloc for the data buffer if it's small instead of vmalloc. - Throttle some annoying error messages when I/O fails." * tag 'dm-3.8-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm: (36 commits) dm stripe: add WRITE SAME support dm: remove map_info dm snapshot: do not use map_context dm thin: dont use map_context dm raid1: dont use map_context dm flakey: dont use map_context dm raid1: rename read_record to bio_record dm: move target request nr to dm_target_io dm snapshot: use per_bio_data dm verity: use per_bio_data dm raid1: use per_bio_data dm: introduce per_bio_data dm kcopyd: add WRITE SAME support to dm_kcopyd_zero dm linear: add WRITE SAME support dm: add WRITE SAME support dm: prepare to support WRITE SAME dm ioctl: use kmalloc if possible dm ioctl: remove PF_MEMALLOC dm persistent data: improve improve space map block alloc failure message dm thin: use DMERR_LIMIT for errors ...