summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2012-09-12powerpc/fsl-pci: Unify pci/pcie initialization codeJia Hongtao33-537/+249
We unified the Freescale pci/pcie initialization by changing the fsl_pci to a platform driver. In previous PCI code architecture the initialization routine is called at board_setup_arch stage. Now the initialization is done in probe function which is architectural better. Also It's convenient for adding PM support for PCI controller in later patch. Now we registered pci controllers as platform devices. So we combine two initialization code as one platform driver. Signed-off-by: Jia Hongtao <B38951@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-12powerpc/pci: Use PCIe IP block revision register instead of compatibleRoy Zang1-6/+8
Freescale PCIe IP block revision bigger than rev2.2 will also need redefine the sequence of inbound windows. So change to use IP block revision instead of compatible for the judgment. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-12powerpc/pci: Add IP revision register define for Freescale PCIe controllerRoy Zang1-1/+4
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-12powerpc/p5040: fix dtb build warning of p5040ds.dtbShaohui Xie1-4/+4
Device node adt7461 was wrongly added in p5040ds.dts, it should be added into i2c instead of localbus, when build p5040ds.dtb, a warning will dump: Warning (reg_format): "reg" property in /localbus@ffe124000/nand@2,0/adt7461@4c has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1) This was introduced by: commit ea6b1ba692bcb5f6e39f409a78cf8b04fdf23baa Author: Jia Hongtao <B38951@freescale.com> Date: Tue Aug 28 10:00:55 2012 +0800 powerpc: add adt7461 thermal monitor support to applicable boards Add thermal monitor support to following boards: P1022DS, MPC8536DS, P2041RDB, P3041DS, P4080DS, P5020DS, P5040DS Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-12powerpc/8544ds: add partition table for norflashWang Dongsheng2-1/+42
create partition table for norflash. Signed-off-by: Wang Dongsheng <Dongsheng.Wang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-12powerpc: add adt7461 thermal monitor support to applicable boardsJia Hongtao7-0/+28
Add thermal monitor support to following boards: P1022DS, MPC8536DS, P2041RDB, P3041DS, P4080DS, P5020DS, P5040DS Signed-off-by: Jia Hongtao <B38951@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-12powerpc/mpc85xx: Add new ext fields to Integrated FLash ControllerPrabhakar Kushwaha1-6/+8
Freescale's Integrated Flash controller(IFC) v1.1.0 supports 40 bit address bus width. In case more than 32 bit address is used, the EXT registers should be set. Add support of ext registers. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-12powerpc: Update Integrated Flash controller device tree bindingsPrabhakar Kushwaha1-3/+6
Freescale's Integrated Flash controller (IFC) may have one or two interrupts. In case of single interrupt line, it will cover all IFC interrupts. Update this information in IFC device tree bindings Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-12powerpc/e5500: Add Power ISA properties to comply with ePAPR 1.1Olivia Yin3-0/+65
power-isa-version and power-isa-* are cpu node general properties defined in ePAPR. If the power-isa-version property exists, then for each category from the Categories section of Book I of the Power ISA version indicated, the existence of a property named power-isa-[CAT], where [CAT] is the abbreviated category name with all uppercase letters converted to lowercase, indicates that the category is supported by the implementation. This patch update all the e5500 platforms. Signed-off-by: Liu Yu <yu.liu@freescale.com> Signed-off-by: Olivia Yin <hong-hua.yin@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-12powerpc/e500mc: Add Power ISA properties to comply with ePAPR 1.1Olivia Yin4-0/+67
power-isa-version and power-isa-* are cpu node general properties defined in ePAPR. If the power-isa-version property exists, then for each category from the Categories section of Book I of the Power ISA version indicated, the existence of a property named power-isa-[CAT], where [CAT] is the abbreviated category name with all uppercase letters converted to lowercase, indicates that the category is supported by the implementation. The patch update all the e500mc platforms. Signed-off-by: Liu Yu <yu.liu@freescale.com> Signed-off-by: Olivia Yin <hong-hua.yin@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-12powerpc/e500v2: Add Power ISA properties to comply with ePAPR 1.1Olivia Yin17-0/+96
power-isa-version and power-isa-* are cpu node general properties defined in ePAPR. If the power-isa-version property exists, then for each category from the Categories section of Book I of the Power ISA version indicated, the existence of a property named power-isa-[CAT], where [CAT] is the abbreviated category name with all uppercase letters converted to lowercase, indicates that the category is supported by the implementation. The patch update all e500v2 platforms. Signed-off-by: Liu Yu <yu.liu@freescale.com> Signed-off-by: Olivia Yin <hong-hua.yin@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-12powerpc/mpic: FSL MPIC error interrupt support.Varun Sethi5-2/+229
All SOC device error interrupts are muxed and delivered to the core as a single MPIC error interrupt. Currently all the device drivers requiring access to device errors have to register for the MPIC error interrupt as a shared interrupt. With this patch we add interrupt demuxing capability in the mpic driver, allowing device drivers to register for their individual error interrupts. This is achieved by handling error interrupts in a cascaded fashion. MPIC error interrupt is handled by the "error_int_handler", which subsequently demuxes it using the EISR and delivers it to the respective drivers. The error interrupt capability is dependent on the MPIC EIMR register, which was introduced in FSL MPIC version 4.1 (P4080 rev2). So, error interrupt demuxing capability is dependent on the MPIC version and can be used for versions >= 4.1. Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com> Signed-off-by: Bogdan Hamciuc <bogdan.hamciuc@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-12powerpc/swiotlb: Enable at early stage and disable if not necessaryJia Hongtao7-14/+32
Remove the dependency on PCI initialization for SWIOTLB initialization. So that PCI can be initialized at proper time. SWIOTLB is partly determined by PCI inbound/outbound map which is assigned in PCI initialization. But swiotlb_init() should be done at the stage of mem_init() which is much earlier than PCI initialization. So we reserve the memory for SWIOTLB first and free it if not necessary. All boards are converted to fit this change. Signed-off-by: Jia Hongtao <B38951@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Acked-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-12powerpc/booke: Add CPU_FTR_EMB_HV check for e5500.Varun Sethi1-0/+6
Added CPU_FTR_EMB_HV feature check for e5500. Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com> Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-12powerpc/booke: Separate out restore_e5500/setup_e5500 routines.Varun Sethi2-18/+32
For the 64 bit case separate out e5500 cpu_setup and cpu_restore functions. The cpu_setup function (for the primary core) is passed the cpu_spec pointer, which is not there in case of the cpu_restore function. Also, in our case we will have to manipulate the CPU_FTR_EMB_HV flag on the primary core. Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-12powerpc/booke: Merge the 32 bit e5500/e500mc cpu setup code.Varun Sethi2-4/+7
Merge the 32 bit cpu setup code for e500mc/e5500 and define the "cpu_restore" routine (for e5500/e6500) only for the 64 bit case. The cpu_restore routine is used in the 64 bit case for setting up the secondary cores. Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-12powepc/booke: Separate out E.HV check and ivor setup code.Varun Sethi2-17/+30
Move the E.HV check and CPU_FTR_EMB_HV flag manipulation to the cpu setup code. Create a separate routine for E.HV ivors setup. Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-12powerpc/85xx: add HOTPLUG_CPU supportZhao Chenhui5-15/+112
Add support to disable and re-enable individual cores at runtime on MPC85xx/QorIQ SMP machines. Currently support e500v1/e500v2 core. MPC85xx machines use ePAPR spin-table in boot page for CPU kick-off. This patch uses the boot page from bootloader to boot core at runtime. It supports 32-bit and 36-bit physical address. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jin Qing <b24347@freescale.com> Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-12powerpc/85xx: implement hardware timebase syncZhao Chenhui2-0/+84
Do hardware timebase sync. Firstly, stop all timebases, and transfer the timebase value of the boot core to the other core. Finally, start all timebases. Only apply to dual-core chips, such as MPC8572, P2020, etc. Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-12powerpc/smp: add generic_set_cpu_up() to set cpu_state as CPU_UP_PREPAREZhao Chenhui2-1/+12
In the case of cpu hotplug, the cpu_state should be set to CPU_UP_PREPARE when kicking cpu. Otherwise, the cpu_state is always CPU_DEAD after calling generic_set_cpu_dead(), which makes the delay in generic_cpu_die() not happen. Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-12powerpc/85xx: Replace epapr spin table macros/defines with a structZhao Chenhui1-23/+23
Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-12powerpc/mpic: finish supporting timer group B on Freescale chipsVarun Sethi2-16/+47
Previously, these interrupts would be mapped, but the offset calculation was broken, and only the first group was initialized. Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-12powerpc/85xx: introduce support for the Freescale / iVeia P1022RDKTimur Tabi6-0/+393
The Freescale / iVeia P1022RDK reference board is a small-factor board with a Freescale P1022 SOC. It includes: 1) 512 MB 64-bit DDR3-800 (max) memory 2) 8MB SPI serial flash memory for boot loader 3) Bootable 4-bit SD/MMC port 4) Two 10/100/1000 Ethernet connectors 5) One SATA port 6) Two USB ports 7) One PCIe x4 slot 8) DVI video connector 9) Audio input and output jacks, powered by a Wolfson WM8960 codec. Unlike the P1022DS, the P1022RDK does not have any localbus devices, presumably because of the localbus / DIU multiplexing restriction of the P1022 SOC. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-12powerpc/85xx: Add support for P5040DS boardTimur Tabi7-1/+318
Add support for the Freescale P5040DS Reference Board ("Superhydra"), which is similar to the P5020DS. Features of the P5040 are listed below, but not all of these features (e.g. DPAA networking) are currently supported. Four P5040 single-threaded e5500 cores built Up to 2.4 GHz with 64-bit ISA support Three levels of instruction: user, supervisor, hypervisor CoreNet platform cache (CPC) 2.0 MB configures as dual 1 MB blocks hierarchical interconnect fabric Two 64-bit DDR3/3L SDRAM memory controllers with ECC and interleaving support Up to 1600MT/s Memory pre-fetch engine DPAA incorporating acceleration for the following functions Packet parsing, classification, and distribution (FMAN) Queue management for scheduling, packet sequencing and congestion management (QMAN) Hardware buffer management for buffer allocation and de-allocation (BMAN) Cryptography acceleration (SEC 5.0) at up to 40 Gbps SerDes 20 lanes at up to 5 Gbps Supports SGMII, XAUI, PCIe rev1.1/2.0, SATA Ethernet interfaces Two 10 Gbps Ethernet MACs Ten 1 Gbps Ethernet MACs High-speed peripheral interfaces Two PCI Express 2.0/3.0 controllers Additional peripheral interfaces Two serial ATA (SATA 2.0) controllers Two high-speed USB 2.0 controllers with integrated PHY Enhanced secure digital host controller (SD/MMC/eMMC) Enhanced serial peripheral interface (eSPI) Two I2C controllers Four UARTs Integrated flash controller supporting NAND and NOR flash DMA Dual four channel Support for hardware virtualization and partitioning enforcement Extra privileged level for hypervisor support QorIQ Trust Architecture 1.1 Secure boot, secure debug, tamper detection, volatile key storage Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-12powerpc/85xx: add Freescale P5040 SOC and SEC v5.2 device treesKim Phillips3-0/+549
Add device tree (dtsi) files for the Freescale P5040 SOC. Since this SOC introduces SEC v5.2, add the dtsi file for that also. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-12powerpc/fsl-pci: add fsl,qoriq-pcie-v2.4 compatible stringTimur Tabi1-0/+1
The PCI controller on the Freescale P5040 is v2.4. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-12powerpc/85xx: remove P1020RDB and P2020RDB CAMP device treesTimur Tabi4-396/+0
We only need two examples of CAMP device trees in the upstream kernel. Co-operative Asymmetric Multi-Processing (CAMP) is a technique where two or more operating systems (typically multiple copies of the same Linux kernel) are loaded into memory, and each kernel is given a subset of the available cores to execute on. For example, on a four-core system, one kernel runs on cores 0 and 1, and the other runs on cores 2 and 3. The devices are also partitioned among the operating systems, and this is done with customized device trees. Each kernel gets its own device tree that has only the devices that it should know about. Unfortunately, this approach is very hackish. The kernels are trusted to only access devices in their respective device trees, and the partitioning only works for devices that can be handled. Crafting the device trees is a tricky process, and getting U-Boot to load and start all kernels is cumbersome. But most importantly, each CAMP setup is very application-specific, since the actual partitioning of resources is done in the DTS by the system designer. Therefore, it doesn't make a lot of sense to have a lot of CAMP device trees, since we only expect them to be used as examples. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-12powerpc/85xx: L2sram - Add compatible string to the device id listTang Yuantian1-0/+10
The following platforms are supported: mpc8544, mpc8572, mpc8536, p1021, p1025, p1024, p1010. Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-10powerpc/mm: Match variable types to APIJoe MacDonald1-2/+4
sys_subpage_prot() takes an unsigned long for 'addr' then does some stuff with it and the result is stored in a signed int, i, which is eventually used as the size parameter in a copy_from_user call. Update 'i' to be an unsigned long as well and since 'nw' is used in a size_t context which, depending on whether this is 32- or 64-bit may be unsigned int or unsigned long, switch that to a size_t and always be right. Finally, since we're in the neighbourhood, make the same changes to subpage_prot_clear(). Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Joe MacDonald <joe.macdonald@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-10powerpc/iommu: Add ppc_md.tce_get() callback for use by VFIOAlexey Kardashevskiy1-0/+6
The upcoming VFIO support requires a way to know which entry in the TCE map is not empty in order to do cleanup at QEMU exit/crash. This patch adds such functionality to POWERNV platform code. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-10powerpc: cleanup old DABRX #definesMichael Neuling1-5/+0
These are no longer used so get rid of them Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-10powerpc: Dynamically calculate the dabrx based on kernel/user/hypervisorMichael Neuling3-5/+13
Currently we mark the DABRX to interrupt on all matches (hypervisor/kernel/user and then filter in software. We can be a lot smarter now that we can set the DABRX dynamically. This sets the DABRX based on the flags passed by the user. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-10powerpc: Rework set_dabr so it can take a DABRX value as wellMichael Neuling14-30/+46
Rework set_dabr to take a DABRX value as well. Both the pseries and PS3 hypervisors do some checks on the DABRX values that are passed in the hcall. This patch stops bogus values from being passed to hypervisor. Also, in the case where we are clearing the breakpoint, where DABR and DABRX are zero, we modify the DABRX value to make it valid so that the hcall won't fail. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-10powerpc/eeh: Cleanup on EEH PCI address cacheGavin Shan5-33/+32
The patch does cleanup on EEH PCI address cache based on the fact EEH core is the only user of the component. * Cleanup on function names so that they all have prefix "eeh" and looks more short. * Function printk() has been replaced with pr_debug() or pr_warning() accordingly. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-10powerpc/eeh: Trace eeh device from I/O cacheGavin Shan6-32/+28
The idea comes from Benjamin Herrenschmidt. The eeh cache helps fetching the pci device according to the given I/O address. Since the eeh cache is serving for eeh, it's reasonable for eeh cache to trace eeh device except pci device. The patch make eeh cache to trace eeh device. Also, the major eeh entry function eeh_dn_check_failure has been renamed to eeh_dev_check_failure since it will take eeh device as input parameter. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-10powerpc/eeh: Probe mode supportGavin Shan4-109/+140
While EEH module is installed, PCI devices is checked one by one to see if it supports eeh. On different platforms, the PCI devices are referred through different ways when the EEH module is loaded. For example, on pSeries platform, that is done by OF node. However, we would do that by real PCI devices (struct pci_dev) on PowerNV platform in future. So we needs some mechanism to differentiate those cases by classifying them to probe modes, either from OF nodes or real PCI devices. The patch implements the support to eeh probe mode. Also, the EEH on pSeries has set it into EEH_PROBE_MODE_DEVTREE. That means the probe will be done based on OF nodes on pSeries platform. In addition, On pSeries platform, it's done by OF nodes. The patch moves the the probe function from EEH core to platform dependent backend and some cleanup applied. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-10powerpc/eeh: Move stats to PEGavin Shan5-32/+8
The patch removes the eeh related statistics for eeh device since they have been maintained by the corresponding eeh PE. Also, the flags used to trace the state of eeh device and PE have been reworked for a little bit. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-10powerpc/eeh: Handle EEH error based on PEGavin Shan5-137/+125
The patch reworks the current implementation so that the eeh errors will be handled basing on PE instead of eeh device. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-10powerpc/eeh: Make EEH handler PE sensitiveGavin Shan1-15/+10
Once eeh error is found, eeh event will be created and put it into the global linked list. At the mean while, kernel thread will be started to process it. The handler for the kernel thread originally was eeh device sensitive. The patch reworks the handler of the kernel thread so that it's PE sensitive. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-10powerpc/eeh: Do reset based on PEGavin Shan2-58/+35
The patch implements reset based on PE instead of eeh device. Also, The functions used to retrieve the reset type, either hot or fundamental reset, have been reworked for a little bit. More specificly, it's implemented based the the eeh device traverse function. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-10powerpc/eeh: I/O enable and log retrival based on PEGavin Shan2-27/+21
The patch refactors the original implementation in order to enable I/O and retrieve EEH log based on PE. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-10powerpc/eeh: Device bars restore based on PEGavin Shan4-80/+97
The patch introduces the function to traverse the devices of the specified PE and its child PEs. Also, the restore on device bars is implemented based on the traverse function. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-10powerpc/eeh: Make EEH operations based on PEGavin Shan3-86/+74
Originally, all the EEH operations were implemented based on OF node. Actually, it explicitly breaks the rules that the operation target is PE instead of device. Therefore, the patch makes all the operations based on PE instead of device. Unfortunately, the backend for config space has to be kept as original because it doesn't depend on PE. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-10powerpc/eeh: Trace error based on PE from beginningGavin Shan3-33/+25
There're 2 conditions to trigger EEH error detection: invalid value returned from reading I/O or config space. On each case, the function eeh_dn_check_failure will be called to initialize EEH event and put it into the poll for further processing. The patch changes the function for a little bit so that the EEH error will be traced based on PE instead of EEH device any more. Also, the function eeh_find_device_pe() has been removed since the eeh device is tracing the PE by struct eeh_dev::pe. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-10powerpc/eeh: Trace EEH state based on PEGavin Shan4-104/+84
Since we've introduced dedicated struct to trace individual PEs, it's reasonable to trace its state through the dedicated struct instead of using "eeh_dev" any more. The patches implements the state tracing based on PE. It's notable that the PE state will be applied to the specified PE as well as its child PEs. That complies with the rule that problematic parent PE will prevent those child PEs from working properly. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-10powerpc/eeh: Build EEH event based on PEGavin Shan2-23/+10
The original implementation builds EEH event based on EEH device. We already had dedicated struct to depict PE. It's reasonable to build EEH event based on PE. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-10powerpc/eeh: Remove PE at appropriate timeGavin Shan3-0/+49
During PCI hotplug and EEH recovery, the PE hierarchy tree might be changed due to the PCI topology changes. At later point when the PCI device is added, the PE will be created dynamically again. The patch introduces new function to remove EEH devices from the associated PE. That also can cause that the parent PE is removed from the PE tree if the parent PE doesn't include valid EEH devices and child PEs. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-10powerpc/eeh: Create PEs duing EEH initializationGavin Shan3-0/+87
The patch creates PEs and associated the newly created PEs with it parent/silbing as well as EEH devices. It would become more straight to trace EEH errors and recover them accordingly. Once the EEH functionality on one PCI IOA has been enabled, we tries to create PE against it. If there's existing PE, to which the current PCI IOA should be attached, the existing PE will be converted from "device" type to "bus" type accordingly. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-10powerpc/eeh: Search PE based on requirementGavin Shan2-0/+144
The patch implements searching PE based on the following requirements: * Search PE according to PE address, which is traditional PE address that is composed of PCI bus/device/function number, or unified PE address assigned by firmware or platform. * Search parent PE according to the given EEH device. It's useful when creating new PE and put it into right position. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-10powerpc/eeh: Create PEs for PHBsGavin Shan4-2/+129
For one particular PE, it's only meaningful in the ancestor PHB domain. Therefore, each PHB should have its own PE hierarchy tree to trace those PEs created against the PHB. The patch creates PEs for the PHBs and put those PEs into the global link list traced by "eeh_phb_pe". The link list of PEs would be first level of overall PE hierarchy tree across the system. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-30 06:19:00 +0300