summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-08-25scsi: lpfc: Add cmf_info sysfs entryJames Smart7-10/+235
Allow abbreviated cm framework status information to be obtained via sysfs. Link: https://lore.kernel.org/r/20210816162901.121235-14-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-25scsi: lpfc: Add debugfs support for cm framework buffersJames Smart3-0/+234
Add support via debugfs to report the cm statistics, cm enablement, and rx monitor information. Link: https://lore.kernel.org/r/20210816162901.121235-13-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-25scsi: lpfc: Add support for maintaining the cm statistics bufferJames Smart3-1/+542
Add the logic to move the congestion management and event information into the cmd statistics buffer maintained for the adapter. The update includes rolling up values for the last minute, hour, and day information. Link: https://lore.kernel.org/r/20210816162901.121235-12-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-25scsi: lpfc: Add rx monitoring statisticsJames Smart5-0/+92
The driver provides overwatch of the cm behavior by maintaining a set of rx I/O statistics. This information is also used in later updating of the cm statistics buffer. Link: https://lore.kernel.org/r/20210816162901.121235-11-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-25scsi: lpfc: Add support for the CM frameworkJames Smart12-34/+912
Complete the enablement of the cm framework feature in the adapter. Perform the following: - Detect the presence of the congestion management framework feature. When the cm framework is present: - Issue the SET_FEATURE command to enable the feature. - Register the cm statistics buffer with the adapter. - Read the cm enablement buffer to determine the cm framework state for cm management. When cm management is enabled: - Monitor all FPIN and congestion signalling events, incrementing counters. - Regularly sync with the adapter to communicate congestion events and to receive an rx request limit. - Monitor requests for rx data and ensure that no more than the adapter prescribed limit is issued on the link. If the limit is exceeded, SCSI and/or NVMe traffic is temporarily suspended. - Maintain the minute, hourly, daily statistics buffer. - Monitor for congestion enablement change events, causing a reread of the enablement buffer and acting on any change in enablement. And: - Add teardown logic, including buffer deregistration, on adapter detachment or reset. Link: https://lore.kernel.org/r/20210816162901.121235-10-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-25scsi: lpfc: Add cmfsync WQE supportJames Smart5-3/+268
When congestion mgmt is enabled, cmf has the driver regularly issue a command to synchronize reporting of congestion mgmt events such as fpin and signal delivery. This patch adds the definition of the CMF_SYNC WQE and its CQE fields as well as support for issuing the command. The patch also adds the few remaining cmf-related SLI additions, such as feature definition for enablement of CMF and notifications to the driver if the cm enablement mode changes. Link: https://lore.kernel.org/r/20210816162901.121235-9-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-25scsi: lpfc: Add support for cm enablement bufferJames Smart6-5/+363
As part of the cmf framework, the firmware maintains a table with congestion related state information, specifically whether enabled and if enabled, whether monitoring or actively managing congestion. Add definition of the table and add support to read the table from the adapter and determine if it is enabled. In support of this, the READ_OBJECT mailbox command definition is added to the driver. Link: https://lore.kernel.org/r/20210816162901.121235-8-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-25scsi: lpfc: Add cm statistics buffer supportJames Smart5-0/+272
The cmf framework requires the driver to maintain a cm statistics table, accessible inband, of congestion related statistics that are reported per minute, rolled up to per hour, and rolled up again per day. Several days worth may be maintained. The table is registered with the adapter when the MIB feature is enabled. Add definition of the table and add support to register the table with the adapter. Includes definition and initialization of event counters that are later added to the statistics table. Link: https://lore.kernel.org/r/20210816162901.121235-7-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-25scsi: lpfc: Add EDC ELS supportJames Smart10-11/+988
When congestion management is enabled, issue EDC ELS to register congestion signaling capabilities with the fabric. The response handling will process the fabric parameters and set the reporting parameters. Similarly, add support for receiving an EDC request from the fabric generating a corresponding response. Implement handlers for congestion signals from the fabric and maintain statistics for them. Link: https://lore.kernel.org/r/20210816162901.121235-6-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-25scsi: lpfc: Expand FPIN and RDF receive loggingJames Smart2-41/+322
Expand FPIN logging: - Display Attached Port Names for Link Integrity and Peer Congestion events - Log Delivery, Peer Congestion, and Congestion events - Sanity check FPIN descriptor lengths when processing FPIN descriptors. Log RDF events when congestion logging is enabled. Link: https://lore.kernel.org/r/20210816162901.121235-5-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-25scsi: lpfc: Add MIB feature enablement supportJames Smart5-20/+123
MIB support is currently limited to detecting support in the adapter and ensuring FDMI support is enabled if present. For the new framework MIB support also requires active enablement of support via the SET_FEATURES command with the firmware. Rework the MIB detection and enablement for the following: - Move detection away from the get_sli4_parameters routine, and into the hba_setup path. get_sli4_parameters is only called once at attachment while hba_setup is called as part of any SLI port reset path. This ensures detection after firmware download. - Update SET_FEATURES mbx command for the MIB enablement feature and add support for the feature. - Create the cmf_setup routine to encapsulate the detection of MIB support and perform the enablement of the MIB support feature. Link: https://lore.kernel.org/r/20210816162901.121235-4-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-25scsi: lpfc: Add SET_HOST_DATA mbox cmd to pass date/time info to firmwareJames Smart2-2/+79
Implement the SET_HOST_DATA mbox command to set date / time during initialization. It is used by the firmware for various purposes including congestion management and firmware dumps. Link: https://lore.kernel.org/r/20210816162901.121235-3-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-25scsi: fc: Add EDC ELS definitionJames Smart1-0/+106
Add Exchange Diagnostic Capabilities (EDC) ELS definition and the following capability descriptors: - Link Fault Capability Descriptor - Congestion Signaling Capability Descriptor Definitions taken from FC-LS-5 r5.01 Link: https://lore.kernel.org/r/20210816162901.121235-2-jsmart2021@gmail.com Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-25scsi: ufs: ufshpb: Fix typo in commentsKeoseong Park1-1/+1
Change "allcation" to "allocation". Link: https://lore.kernel.org/r/1891546521.01629282781634.JavaMail.epsvc@epcpadp4 Signed-off-by: Keoseong Park <keosung.park@samsung.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-25scsi: mpi3mr: Set up IRQs in resume pathKashyap Desai3-25/+44
Driver is not setting up IRQs in the resume path. As a result, hibernation path is broken and controller will not be operational after system is resumed. Set up IRQs to handle the hibernation case. Link: https://lore.kernel.org/r/20210818081755.1274470-1-kashyap.desai@broadcom.com Cc: sathya.prakash@broadcom.com Cc: thenzl@redhat.com Reported-by: Marco Patalano <mpatalan@redhat.com> Tested-by: Marco Patalano <mpatalan@redhat.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-25scsi: core: scsi_ioctl: Fix error code propagation in SG_IOHalil Pasic1-1/+1
Link: https://lore.kernel.org/r/20210823133458.3536824-1-pasic@linux.ibm.com Fixes: f2542a3be327 ("scsi: scsi_ioctl: Move the "block layer" SCSI ioctl handling to drivers/scsi") Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-25scsi: ufs: ufshpb: Fix possible memory leakKeoseong Park1-3/+3
When HPB pinned region exists and mctx allocation for this region fails, a memory leak is possible because memory is not released for the subregion table of the current region. Free memory for the subregion table of the current region. Link: https://lore.kernel.org/r/1891546521.01629711601304.JavaMail.epsvc@epcpadp3 Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Keoseong Park <keosung.park@samsung.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-25scsi: snic: Fix spelling mistake 'progres' -> 'progress'Colin Ian King1-1/+1
There is a spelling mistake in a SNIC_HOST_INFO message. Fix it. Link: https://lore.kernel.org/r/20210820151835.59804-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-25scsi: ncr53c8xx: Remove unused codeHannes Reinecke1-163/+0
Link: https://lore.kernel.org/r/20210820095405.12801-4-hare@suse.de Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-25scsi: ncr53c8xx: Complete all commands during bus resetHannes Reinecke1-33/+2
ncr_reset_bus() will complete all outstanding commands anyway, so there's no need to single out a specific command. Link: https://lore.kernel.org/r/20210820095405.12801-3-hare@suse.de Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-25scsi: ncr53c8xx: Remove 'sync_reset' argument from ncr_reset_bus()Hannes Reinecke1-6/+5
Always '1', so we can remove it. Link: https://lore.kernel.org/r/20210820095405.12801-2-hare@suse.de Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-24scsi: core: Fix missing FORCE for scsi_devinfo_tbl.c build ruleMasahiro Yamada1-2/+4
Add FORCE so that if_changed can detect the command line change. scsi_devinfo_tbl.c must be added to 'targets' too. Link: https://lore.kernel.org/r/20210819012339.709409-1-masahiroy@kernel.org Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-24scsi: qla1280: Stop using scsi_cmnd.tagJohn Garry1-1/+1
Use scsi_cmd_to_rq(cmd)->tag instead of scsi_cmnd.tag as preference. Link: https://lore.kernel.org/r/1629294801-32102-2-git-send-email-john.garry@huawei.com Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-24scsi: qla2xxx: Open-code qla2xxx_eh_device_reset()Hannes Reinecke1-31/+23
Device reset and target reset will be using different calling sequences, so open-code __qla2xxx_eh_generic_reset() in qla2xxx_eh_device_reset(), and remove the now obsolete function __qla2xxx_eh_generic_reset(). No functional changes. Link: https://lore.kernel.org/r/20210819091913.94436-4-hare@suse.de Cc: Nilesh Javali <njavali@marvell.com> Reviewed-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-24scsi: qla2xxx: Open-code qla2xxx_eh_target_reset()Hannes Reinecke1-3/+53
Device reset and target reset will be using different calling sequences, so open-code __qla2xxx_eh_generic_reset() in qla2xxx_eh_target_reset(). No functional changes. Link: https://lore.kernel.org/r/20210819091913.94436-3-hare@suse.de Cc: Nilesh Javali <njavali@marvell.com> Reviewed-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-24scsi: qla2xxx: Do not call fc_block_scsi_eh() during bus resetHannes Reinecke1-10/+0
When calling bus reset the driver will be doing a full SAN resync, so there is no need to wait for any pending RSCNs; they'll be re-issued during resync anyway. Link: https://lore.kernel.org/r/20210819091913.94436-2-hare@suse.de Cc: Nilesh Javali <njavali@marvell.com> Reviewed-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-24scsi: qla2xxx: Update version to 10.02.06.200-kNilesh Javali1-2/+2
Link: https://lore.kernel.org/r/20210817051315.2477-13-njavali@marvell.com Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-24scsi: qla2xxx: edif: Fix returnvar.cocci warningskernel test robot1-2/+1
drivers/scsi/qla2xxx/qla_edif.c:213:25-29: Unneeded variable: "rval". Return "0" on line 264 Remove unneeded variable used to store return value. Generated by: scripts/coccinelle/misc/returnvar.cocci Link: https://lore.kernel.org/r/20210817051315.2477-12-njavali@marvell.com Fixes: 7ebb336e45ef ("scsi: qla2xxx: edif: Add start + stop bsgs") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: kernel test robot <lkp@intel.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-24scsi: qla2xxx: Fix NVMe session down detectionQuinn Tran3-5/+26
When Target port transitions personality from one to another (NVMe <--> FCP), there could be some overlap of the two where one layer is going down while the other layer is coming up. This overlap can cause temporary I/O error. Detect those errors/transitions and recover from them. Triggers session tear down and allow relogin to re-drive the connection under the following conditions: - NVMe command error - On PRLO + N2N (rida format 2) Link: https://lore.kernel.org/r/20210817051315.2477-11-njavali@marvell.com Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-24scsi: qla2xxx: Fix NVMe retryQuinn Tran5-26/+40
For target port that register itself as both FCP + NVMe, initiator driver will try to login one mode at a time. If the last mode did not succeed, then driver will try the other mode. When error is encountered, current code only flip to other mode one time (NVMe->FCP) and remain on the last mode. Driver wrongly assumed target port does not support PRLI NVMe, instead it was not ready to receive PRLI. This patch will alternate back and forth on every PRLI failure until login retry count has depleted or it is succeeded. Link: https://lore.kernel.org/r/20210817051315.2477-10-njavali@marvell.com Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-24scsi: qla2xxx: Fix hang on NVMe command timeoutsArun Easi4-14/+25
The abort callback gets called only when it gets posted to firmware. The refcounting is done properly in the callback. On internal errors, the callback is not invoked leading to a hung I/O. Fix this by having separate error code when command gets returned from firmware. Link: https://lore.kernel.org/r/20210817051315.2477-9-njavali@marvell.com Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-24scsi: qla2xxx: Fix NVMe | FCP personality changeQuinn Tran2-2/+4
Currently driver saves the personality type (FCP|NVMe) at the start of first discovery of the remote device. If the remote device personality do change over time, then qla driver needs to present that to user to decide. Link: https://lore.kernel.org/r/20210817051315.2477-8-njavali@marvell.com Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-24scsi: qla2xxx: edif: Do secure PLOGI when auth app is presentQuinn Tran5-14/+10
For initiator mode, always do secure login when authentication app started. Also remove redundant flags to indicate secure connection. Link: https://lore.kernel.org/r/20210817051315.2477-7-njavali@marvell.com Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-24scsi: qla2xxx: edif: Add N2N support for EDIFQuinn Tran11-66/+234
For EDIF + N2N to work, firmware 9.8 or later is required. The driver will pause after PLOGI to allow app to authenticate. Once authentication completes, app will tell driver to do PRLI. Link: https://lore.kernel.org/r/20210817051315.2477-6-njavali@marvell.com Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-24scsi: qla2xxx: Fix hang during NVMe session tear downArun Easi1-1/+1
The following hung task call trace was seen: [ 1230.183294] INFO: task qla2xxx_wq:523 blocked for more than 120 seconds. [ 1230.197749] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1230.205585] qla2xxx_wq D 0 523 2 0x80004000 [ 1230.205636] Workqueue: qla2xxx_wq qlt_free_session_done [qla2xxx] [ 1230.205639] Call Trace: [ 1230.208100] __schedule+0x2c4/0x700 [ 1230.211607] schedule+0x38/0xa0 [ 1230.214769] schedule_timeout+0x246/0x2f0 [ 1230.222651] wait_for_completion+0x97/0x100 [ 1230.226921] qlt_free_session_done+0x6a0/0x6f0 [qla2xxx] [ 1230.232254] process_one_work+0x1a7/0x360 ...when device side port resets were done. Abort threads were getting out without processing due to the "deleted" flag check. The delete thread, meanwhile, could not proceed with a logout (that would have cleared out pending requests) as the logout IOCB work was not progressing. It appears like the hung qlt_free_session_done() thread is causing the ha->wq works on hold. The qlt_free_session_done() was hung waiting for nvme_fc_unregister_remoteport() + localport_delete cb to be complete, which would only happen when all I/Os are released. Fix this by allowing abort to progress until device delete is completely done. This should make the qlt_free_session_done() proceed without hang and thus clear up the deadlock. Link: https://lore.kernel.org/r/20210817051315.2477-5-njavali@marvell.com Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-24scsi: qla2xxx: edif: Fix EDIF enable flagQuinn Tran2-3/+13
edif_enabled is prematurely turned on if hardware is capable of handling the feature. However, firmware also needs to support EDIF before enabling this bit. Link: https://lore.kernel.org/r/20210817051315.2477-4-njavali@marvell.com Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-24scsi: qla2xxx: edif: Reject AUTH ELS on session downQuinn Tran3-2/+8
Reject inflight AUTH ELS if driver is going through session recovery. Link: https://lore.kernel.org/r/20210817051315.2477-3-njavali@marvell.com Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-24scsi: qla2xxx: edif: Fix stale sessionQuinn Tran3-0/+11
When firmware indicates session has been torn down via UPDATE SA IOCB or ELS Passthrough IOCB, the driver needs to also tear down the session. Link: https://lore.kernel.org/r/20210817051315.2477-2-njavali@marvell.com Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-18scsi: sd: Do not exit sd_spinup_disk() quietlyChristian Loehle1-1/+3
The sd_spinup_disk() function logs what is happening. Unfortunately this output stops if the media was marked as removed in the meantime. Add a print for this case too. Link: https://lore.kernel.org/r/CWXP265MB26803209FD08A64222EEEA02C4FD9@CWXP265MB2680.GBRP265.PROD.OUTLOOK.COM Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Christian Loehle <cloehle@hyperstone.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-18scsi: ibmvfc: Do not wait for initial device scanHannes Reinecke2-3/+9
The initial device scan might take some time, and there really is no need to wait for it during probe(). So return immediately from scsi_scan_host() during probe() and avoid any udev stalls during booting. Link: https://lore.kernel.org/r/20210817075306.11315-1-mwilck@suse.com Acked-by: Tyrel Datwyler <tyreld@linux.ibm.com> Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-18scsi: target: Fix sense key for invalid EXTENDED COPY requestSergey Samoylenko1-11/+15
TCM fails to pass the following tests in libiscsi: SCSI.ExtendedCopy.DescrType SCSI.ExtendedCopy.DescrLimits SCSI.ExtendedCopy.ParamHdr SCSI.ExtendedCopy.ValidSegDescr SCSI.ExtendedCopy.ValidTgtDescr The xcopy code always returns the same NOT READY sense key for all detected errors. Change the sense key for invalid requests to ILLEGAL REQUEST, and for aborted transfers to COPY ABORTED. Link: https://lore.kernel.org/r/20210803145410.80147-3-s.samoylenko@yadro.com Fixes: d877d7275be3 ("target: Fix a deadlock between the XCOPY code and iSCSI session shutdown") Reviewed-by: David Disseldorp <ddiss@suse.de> Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Konstantin Shelekhin <k.shelekhin@yadro.com> Signed-off-by: Sergey Samoylenko <s.samoylenko@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-18scsi: target: Allows backend drivers to fail with specific sense codesSergey Samoylenko3-3/+15
Currently, backend drivers can fail I/O with SAM_STAT_CHECK_CONDITION which gets us TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE. Add a new helper that allows backend drivers to fail with specific sense codes. This is based on a patch from Mike Christie <michael.christie@oracle.com>. Cc: Mike Christie <michael.christie@oracle.com> Link: https://lore.kernel.org/r/20210803145410.80147-2-s.samoylenko@yadro.com Reviewed-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Sergey Samoylenko <s.samoylenko@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-18scsi: smartpqi: Replace one-element array with flexible-array memberGustavo A. R. Silva2-3/+2
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use "flexible array members"[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. Refactor the code a bit according to the use of a flexible-array member in struct pqi_event_config instead of a one-element array, and use the struct_size() helper. This helps with the ongoing efforts to globally enable -Warray-bounds and get us closer to being able to tighten the FORTIFY_SOURCE routines on memcpy(). This issue was found with the help of Coccinelle and audited and fixed, manually. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.10/process/deprecated.html#zero-length-and-one-element-arrays Link: https://github.com/KSPP/linux/issues/79 Link: https://github.com/KSPP/linux/issues/109 Link: https://lore.kernel.org/r/20210810210741.GA58765@embeddedor Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-18scsi: target: pscsi: Fix possible null-pointer dereference in ↵Tuo Li1-9/+9
pscsi_complete_cmd() The return value of transport_kmap_data_sg() is assigned to the variable buf: buf = transport_kmap_data_sg(cmd); And then it is checked: if (!buf) { This indicates that buf can be NULL. However, it is dereferenced in the following statements: if (!(buf[3] & 0x80)) buf[3] |= 0x80; if (!(buf[2] & 0x80)) buf[2] |= 0x80; To fix these possible null-pointer dereferences, dereference buf and call transport_kunmap_data_sg() only when buf is not NULL. Link: https://lore.kernel.org/r/20210810040414.248167-1-islituo@gmail.com Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Reviewed-by: Bodo Stroesser <bostroesser@gmail.com> Signed-off-by: Tuo Li <islituo@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-18scsi: core: Remove scsi_cmnd.tagJohn Garry2-2/+0
It is never read, so get rid of it. Link: https://lore.kernel.org/r/1628862553-179450-4-git-send-email-john.garry@huawei.com Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-18scsi: ibmvfc: Stop using scsi_cmnd.tagJohn Garry1-1/+1
Use scsi_cmd_to_rq(scsi_cmnd)->tag in preference to scsi_cmnd.tag. Link: https://lore.kernel.org/r/1629207817-211936-1-git-send-email-john.garry@huawei.com Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-16scsi: fnic: Stop setting scsi_cmnd.tagJohn Garry1-1/+1
It is never read. Setting it and the request tag seems dodgy anyway. Link: https://lore.kernel.org/r/1628862553-179450-3-git-send-email-john.garry@huawei.com Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-16scsi: wd719: Stop using scsi_cmnd.tagJohn Garry1-3/+5
Use scsi_cmd_to_rq(cmd)->tag instead. Link: https://lore.kernel.org/r/1628862553-179450-2-git-send-email-john.garry@huawei.com Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-16scsi: qedf: Fix error codes in qedf_alloc_global_queues()Dan Carpenter1-5/+5
This driver has some left over "return 1" on failure style code mixed with "return negative error codes" style code. The caller doesn't care so we should just convert everything to return negative error codes. Then there was a problem that there were two variables used to store error codes which just resulted in confusion. If qedf_alloc_bdq() returned a negative error code, we accidentally returned success instead of propagating the error code. So get rid of the "rc" variable and use "status" every where. Also remove the "status = 0" initialization so that these sorts of bugs will be detected by the compiler in the future. Link: https://lore.kernel.org/r/20210810085023.GA23998@kili Fixes: 61d8658b4a43 ("scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.") Acked-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-16scsi: qedi: Fix error codes in qedi_alloc_global_queues()Dan Carpenter1-7/+7
This function had some left over code that returned 1 on error instead negative error codes. Convert everything to use negative error codes. The caller treats all non-zero returns the same so this does not affect run time. A couple places set "rc" instead of "status" so those error paths ended up returning success by mistake. Get rid of the "rc" variable and use "status" everywhere. Remove the bogus "status = 0" initialization, as a future proofing measure so the compiler will warn about uninitialized error codes. Link: https://lore.kernel.org/r/20210810084753.GD23810@kili Fixes: ace7f46ba5fd ("scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.") Acked-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-29 14:28:23 +0300