| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add an ethtool "legacy-rx" priv flag for toggling the Rx path. This
control knob will be mainly used for build_skb usage as well as buffer
size/MTU manipulation.
In preparation for adding build_skb support in a way that it takes
care of how we set the values of max_frame and rx_buf_len fields of
struct ice_vsi. Specifically, in this patch mentioned fields are set to
values that will allow us to provide headroom and tailroom in-place.
This can be mostly broken down onto following:
- for legacy-rx "on" ethtool control knob, old behaviour is kept;
- for standard 1500 MTU size configure the buffer of size 1536, as
network stack is expecting the NET_SKB_PAD to be provided and
NET_IP_ALIGN can have a non-zero value (these can be typically equal
to 32 and 2, respectively);
- for larger MTUs go with max_frame set to 9k and configure the 3k
buffer in case when PAGE_SIZE of underlying arch is less than 8k; 3k
buffer is implying the need for order 1 page, so that our page
recycling scheme can still be applied;
With that said, substitute the hardcoded ICE_RXBUF_2048 and PAGE_SIZE
values in DMA API that we're making use of with rx_ring->rx_buf_len and
ice_rx_pg_size(rx_ring). The latter is an introduced helper for
determining the page size based on its order (which was figured out via
ice_rx_pg_order). Last but not least, take care of truesize calculation.
In the followup patch the headroom/tailroom computation logic will be
introduced.
This change aligns the buffer and frame configuration with other Intel
drivers, most importantly with iavf.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Add zero copy AF_XDP support. This patch adds zero copy support for
Tx and Rx; code for zero copy is added to ice_xsk.h and ice_xsk.c.
For Tx, implement ndo_xsk_wakeup. As with other drivers, reuse
existing XDP Tx queues for this task, since XDP_REDIRECT guarantees
mutual exclusion between different NAPI contexts based on CPU ID. In
turn, a netdev can XDP_REDIRECT to another netdev with a different
NAPI context, since the operation is bound to a specific core and each
core has its own hardware ring.
For Rx, allocate frames as MEM_TYPE_ZERO_COPY on queues that AF_XDP is
enabled.
Signed-off-by: Krzysztof Kazimierczak <krzysztof.kazimierczak@intel.com>
Co-developed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
In preparation of AF XDP, move functions that will be used both by skb and
zero-copy paths to a new file called ice_txrx_lib.c. This allows us to
avoid using ifdefs to control the staticness of said functions.
Move other functions (ice_rx_csum, ice_rx_hash and ice_ptype_to_htype)
called only by the moved ones to the new file as well.
Signed-off-by: Krzysztof Kazimierczak <krzysztof.kazimierczak@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Commit 5bc60de50dfe ("selftests: bpf: Don't try to read files without
read permission") got reverted as the fix was not working as expected
and real fix came in via 8101e069418d ("selftests: bpf: Skip write
only files in debugfs"). When bpf-next got merged into net-next, the
test_offload.py had a small conflict. Fix the resolution in ae8a76fb8b5d
iby not reintroducing 5bc60de50dfe again.
Fixes: ae8a76fb8b5d ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Building with W=1 (cf.scripts/Makefile.extrawarn) outputs:
warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
Drop the unused 'ret' variable.
Signed-off-by: Christophe Roullier <christophe.roullier@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
IOC3 hardware needs a 16k aligned TX ring.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Set NETIF_F_HIGHDMA together with the NETIF_F_IP_CSUM flag instead of
letting the second assignment overwrite it. Probably doesn't matter
in practice as none of the systems an IOC3 is usually found in has
highmem to start with.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is no need to fall back to a lower mask these days, the DMA mask
just communicates the hardware supported features.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
dma_alloc_coherent always zeroes memory, there is no need for
__GFP_ZERO. Also doing a GFP_ATOMIC allocation just before a GFP_KERNEL
one is clearly bogus.
Fixes: ed870f6a7aa2 ("net: sgi: ioc3-eth: use dma-direct for dma allocations")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
dma_direct_ is a low-level API that must never be used by drivers
directly. Switch to use the proper DMA API instead.
Fixes: ed870f6a7aa2 ("net: sgi: ioc3-eth: use dma-direct for dma allocations")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Faster jhash2() can be used instead of jhash(), since
IPv6 addresses have the needed alignment requirement.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Before this change of_get_phy_mode() returned an enum,
phy_interface_t. On error, -ENODEV etc, is returned. If the result of
the function is stored in a variable of type phy_interface_t, and the
compiler has decided to represent this as an unsigned int, comparision
with -ENODEV etc, is a signed vs unsigned comparision.
Fix this problem by changing the API. Make the function return an
error, or 0 on success, and pass a pointer, of type phy_interface_t,
where the phy mode should be stored.
v2:
Return with *interface set to PHY_INTERFACE_MODE_NA on error.
Add error checks to all users of of_get_phy_mode()
Fixup a few reverse christmas tree errors
Fixup a few slightly malformed reverse christmas trees
v3:
Fix 0-day reported errors.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When commit df1c0b8468b3 ("[BRIDGE]: Packets leaking out of
disabled/blocked ports.") introduced the port state tests in
br_fdb_update() it was to avoid learning/refreshing from STP BPDUs, it was
also used to avoid learning/refreshing from user-space with NTF_USE. Those
two tests are done for every packet entering the bridge if it's learning,
but for the fast-path we already have them checked in br_handle_frame() and
is unnecessary to do it again. Thus push the checks to the unlikely cases
and drop them from br_fdb_update(), the new nbp_state_should_learn() helper
is used to determine if the port state allows br_fdb_update() to be called.
The two places which need to do it manually are:
- user-space add call with NTF_USE set
- link-local packet learning done in __br_handle_local_finish()
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for XDP. Implement ndo_bpf and ndo_xdp_xmit. Upon load of
an XDP program, allocate additional Tx rings for dedicated XDP use.
The following actions are supported: XDP_TX, XDP_DROP, XDP_REDIRECT,
XDP_PASS, and XDP_ABORTED.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
There's no reason for treating DCB as first class citizen when configuring
the Tx queues and going through TCs. Reverse the logic and base the
configuration logic on rings, which is the object of interest anyway.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Remove a few uses of kernel configuration flags from ice_lib.c by
introducing a new source file ice_base.c. Also move corresponding
function prototypes from ice_lib.h to ice_base.h and include ice_base.h
where required.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2019-11-01
Misc updates for mlx5 netdev and core driver
1) Steering Core: Replace CRC32 internal implementation with standard
kernel lib.
2) Steering Core: Support IPv4 and IPv6 mixed matcher.
3) Steering Core: Lockless FTE read lookups
4) TC: Bit sized fields rewrite support.
5) FPGA: Standalone FPGA support.
6) SRIOV: Reset VF parameters configurations on SRIOV disable.
7) netdev: Dump WQs wqe descriptors on CQE with error events.
8) MISC Cleanups.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
drivers/isdn/hardware/mISDN/mISDNisar.c:30:17:
warning: faxmodulation_s defined but not used [-Wunused-const-variable=]
It is never used, so can be removed.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The IDT ClockMatrix (TM) family includes integrated devices that provide
eight PLL channels. Each PLL channel can be independently configured as a
frequency synthesizer, jitter attenuator, digitally controlled
oscillator (DCO), or a digital phase lock loop (DPLL). Typically
these devices are used as timing references and clock sources for PTP
applications. This patch adds support for the device.
Co-developed-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Vincent Cheng <vincent.cheng.xh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add device tree binding doc for the IDT ClockMatrix PTP clock.
Signed-off-by: Vincent Cheng <vincent.cheng.xh@renesas.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
traceroute6 output can be confusing, in that it shows the address
that a router would use to reach the sender, rather than the address
the packet used to reach the router.
Consider this case:
------------------------ N2
| |
------ ------ N3 ----
| R1 | | R2 |------|H2|
------ ------ ----
| |
------------------------ N1
|
----
|H1|
----
where H1's default route is through R1, and R1's default route is
through R2 over N2.
traceroute6 from H1 to H2 shows R2's address on N1 rather than on N2.
The script below can be used to reproduce this scenario.
traceroute6 output without this patch:
traceroute to 2000:103::4 (2000:103::4), 30 hops max, 80 byte packets
1 2000:101::1 (2000:101::1) 0.036 ms 0.008 ms 0.006 ms
2 2000:101::2 (2000:101::2) 0.011 ms 0.008 ms 0.007 ms
3 2000:103::4 (2000:103::4) 0.013 ms 0.010 ms 0.009 ms
traceroute6 output with this patch:
traceroute to 2000:103::4 (2000:103::4), 30 hops max, 80 byte packets
1 2000:101::1 (2000:101::1) 0.056 ms 0.019 ms 0.006 ms
2 2000:102::2 (2000:102::2) 0.013 ms 0.008 ms 0.008 ms
3 2000:103::4 (2000:103::4) 0.013 ms 0.009 ms 0.009 ms
#!/bin/bash
#
# ------------------------ N2
# | |
# ------ ------ N3 ----
# | R1 | | R2 |------|H2|
# ------ ------ ----
# | |
# ------------------------ N1
# |
# ----
# |H1|
# ----
#
# N1: 2000:101::/64
# N2: 2000:102::/64
# N3: 2000:103::/64
#
# R1's host part of address: 1
# R2's host part of address: 2
# H1's host part of address: 3
# H2's host part of address: 4
#
# For example:
# the IPv6 address of R1's interface on N2 is 2000:102::1/64
#
# Nets are implemented by macvlan interfaces (bridge mode) over
# dummy interfaces.
#
# Create net namespaces
ip netns add host1
ip netns add host2
ip netns add rtr1
ip netns add rtr2
# Create nets
ip link add net1 type dummy; ip link set net1 up
ip link add net2 type dummy; ip link set net2 up
ip link add net3 type dummy; ip link set net3 up
# Add interfaces to net1, move them to their nemaspaces
ip link add link net1 dev host1net1 type macvlan mode bridge
ip link set host1net1 netns host1
ip link add link net1 dev rtr1net1 type macvlan mode bridge
ip link set rtr1net1 netns rtr1
ip link add link net1 dev rtr2net1 type macvlan mode bridge
ip link set rtr2net1 netns rtr2
# Add interfaces to net2, move them to their nemaspaces
ip link add link net2 dev rtr1net2 type macvlan mode bridge
ip link set rtr1net2 netns rtr1
ip link add link net2 dev rtr2net2 type macvlan mode bridge
ip link set rtr2net2 netns rtr2
# Add interfaces to net3, move them to their nemaspaces
ip link add link net3 dev rtr2net3 type macvlan mode bridge
ip link set rtr2net3 netns rtr2
ip link add link net3 dev host2net3 type macvlan mode bridge
ip link set host2net3 netns host2
# Configure interfaces and routes in host1
ip netns exec host1 ip link set lo up
ip netns exec host1 ip link set host1net1 up
ip netns exec host1 ip -6 addr add 2000:101::3/64 dev host1net1
ip netns exec host1 ip -6 route add default via 2000:101::1
# Configure interfaces and routes in rtr1
ip netns exec rtr1 ip link set lo up
ip netns exec rtr1 ip link set rtr1net1 up
ip netns exec rtr1 ip -6 addr add 2000:101::1/64 dev rtr1net1
ip netns exec rtr1 ip link set rtr1net2 up
ip netns exec rtr1 ip -6 addr add 2000:102::1/64 dev rtr1net2
ip netns exec rtr1 ip -6 route add default via 2000:102::2
ip netns exec rtr1 sysctl net.ipv6.conf.all.forwarding=1
# Configure interfaces and routes in rtr2
ip netns exec rtr2 ip link set lo up
ip netns exec rtr2 ip link set rtr2net1 up
ip netns exec rtr2 ip -6 addr add 2000:101::2/64 dev rtr2net1
ip netns exec rtr2 ip link set rtr2net2 up
ip netns exec rtr2 ip -6 addr add 2000:102::2/64 dev rtr2net2
ip netns exec rtr2 ip link set rtr2net3 up
ip netns exec rtr2 ip -6 addr add 2000:103::2/64 dev rtr2net3
ip netns exec rtr2 sysctl net.ipv6.conf.all.forwarding=1
# Configure interfaces and routes in host2
ip netns exec host2 ip link set lo up
ip netns exec host2 ip link set host2net3 up
ip netns exec host2 ip -6 addr add 2000:103::4/64 dev host2net3
ip netns exec host2 ip -6 route add default via 2000:103::2
# Ping host2 from host1
ip netns exec host1 ping6 -c5 2000:103::4
# Traceroute host2 from host1
ip netns exec host1 traceroute6 2000:103::4
# Delete nets
ip link del net3
ip link del net2
ip link del net1
# Delete namespaces
ip netns del rtr2
ip netns del rtr1
ip netns del host2
ip netns del host1
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Original-patch-by: Honggang Xu <hxu@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As mentioned in commit e95584a889e1 ("tipc: fix unlimited bundling of
small messages"), the current message bundling algorithm is inefficient
that can generate bundles of only one payload message, that causes
unnecessary overheads for both the sender and receiver.
This commit re-designs the 'tipc_msg_make_bundle()' function (now named
as 'tipc_msg_try_bundle()'), so that when a message comes at the first
place, we will just check & keep a reference to it if the message is
suitable for bundling. The message buffer will be put into the link
backlog queue and processed as normal. Later on, when another one comes
we will make a bundle with the first message if possible and so on...
This way, a bundle if really needed will always consist of at least two
payload messages. Otherwise, we let the first buffer go its way without
any need of bundling, so reduce the overheads to zero.
Moreover, since now we have both the messages in hand, we can even
optimize the 'tipc_msg_bundle()' function, make bundle of a very large
(size ~ MSS) and small messages which is not with the current algorithm
e.g. [1400-byte message] + [10-byte message] (MTU = 1500).
Acked-by: Ying Xue <ying.xue@windreiver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Even with icmp_errors_use_inbound_ifaddr set, traceroute returns the
primary address of the interface the packet was received on, even if
the path goes through a secondary address. In the example:
1.0.3.1/24
---- 1.0.1.3/24 1.0.1.1/24 ---- 1.0.2.1/24 1.0.2.4/24 ----
|H1|--------------------------|R1|--------------------------|H2|
---- N1 ---- N2 ----
where 1.0.3.1/24 is R1's primary address on N1, traceroute from
H1 to H2 returns:
traceroute to 1.0.2.4 (1.0.2.4), 30 hops max, 60 byte packets
1 1.0.3.1 (1.0.3.1) 0.018 ms 0.006 ms 0.006 ms
2 1.0.2.4 (1.0.2.4) 0.021 ms 0.007 ms 0.007 ms
After applying this patch, it returns:
traceroute to 1.0.2.4 (1.0.2.4), 30 hops max, 60 byte packets
1 1.0.1.1 (1.0.1.1) 0.033 ms 0.007 ms 0.006 ms
2 1.0.2.4 (1.0.2.4) 0.011 ms 0.007 ms 0.007 ms
Original-patch-by: Bill Fenner <fenner@arista.com>
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Tonghao Zhang says:
====================
optimize openvswitch flow looking up
This series patch optimize openvswitch for performance or simplify
codes.
Patch 1, 2, 4: Port Pravin B Shelar patches to
linux upstream with little changes.
Patch 5, 6, 7: Optimize the flow looking up and
simplify the flow hash.
Patch 8, 9: are bugfix.
The performance test is on Intel Xeon E5-2630 v4.
The test topology is show as below:
+-----------------------------------+
| +---------------------------+ |
| | eth0 ovs-switch eth1 | | Host0
| +---------------------------+ |
+-----------------------------------+
^ |
| |
| |
| |
| v
+-----+----+ +----+-----+
| netperf | Host1 | netserver| Host2
+----------+ +----------+
We use netperf send the 64B packets, and insert 255+ flow-mask:
$ ovs-dpctl add-flow ovs-switch "in_port(1),eth(dst=00:01:00:00:00:00/ff:ff:ff:ff:ff:01),eth_type(0x0800),ipv4(frag=no)" 2
...
$ ovs-dpctl add-flow ovs-switch "in_port(1),eth(dst=00:ff:00:00:00:00/ff:ff:ff:ff:ff:ff),eth_type(0x0800),ipv4(frag=no)" 2
$
$ netperf -t UDP_STREAM -H 2.2.2.200 -l 40 -- -m 18
* Without series patch, throughput 8.28Mbps
* With series patch, throughput 46.05Mbps
v6:
some coding style fixes
v5:
rewrite patch 8, release flow-mask when freeing flow
v4:
access ma->count with READ_ONCE/WRITE_ONCE API. More information,
see patch 5 comments.
v3:
update ma point when realloc mask_array in patch 5
v2:
simplify codes. e.g. use kfree_rcu instead of call_rcu
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
use the specified functions to init resource.
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Tested-by: Greg Rose <gvrose8192@gmail.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Unlocking of a not locked mutex is not allowed.
Other kernel thread may be in critical section while
we unlock it because of setting user_feature fail.
Fixes: 95a7233c4 ("net: openvswitch: Set OvS recirc_id from tc chain index")
Cc: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Tested-by: Greg Rose <gvrose8192@gmail.com>
Acked-by: William Tu <u9012063@gmail.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When we destroy the flow tables which may contain the flow_mask,
so release the flow mask struct.
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Tested-by: Greg Rose <gvrose8192@gmail.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The most case *index < ma->max, and flow-mask is not NULL.
We add un/likely for performance.
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Tested-by: Greg Rose <gvrose8192@gmail.com>
Acked-by: William Tu <u9012063@gmail.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Simplify the code and remove the unnecessary BUILD_BUG_ON.
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Tested-by: Greg Rose <gvrose8192@gmail.com>
Acked-by: William Tu <u9012063@gmail.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The full looking up on flow table traverses all mask array.
If mask-array is too large, the number of invalid flow-mask
increase, performance will be drop.
One bad case, for example: M means flow-mask is valid and NULL
of flow-mask means deleted.
+-------------------------------------------+
| M | NULL | ... | NULL | M|
+-------------------------------------------+
In that case, without this patch, openvswitch will traverses all
mask array, because there will be one flow-mask in the tail. This
patch changes the way of flow-mask inserting and deleting, and the
mask array will be keep as below: there is not a NULL hole. In the
fast path, we can "break" "for" (not "continue") in flow_lookup
when we get a NULL flow-mask.
"break"
v
+-------------------------------------------+
| M | M | NULL |... | NULL | NULL|
+-------------------------------------------+
This patch don't optimize slow or control path, still using ma->max
to traverse. Slow path:
* tbl_mask_array_realloc
* ovs_flow_tbl_lookup_exact
* flow_mask_find
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Tested-by: Greg Rose <gvrose8192@gmail.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Port the codes to linux upstream and with little changes.
Pravin B Shelar, says:
| In case hash collision on mask cache, OVS does extra flow
| lookup. Following patch avoid it.
Link: https://github.com/openvswitch/ovs/commit/0e6efbe2712da03522532dc5e84806a96f6a0dd1
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Tested-by: Greg Rose <gvrose8192@gmail.com>
Signed-off-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When creating and inserting flow-mask, if there is no available
flow-mask, we realloc the mask array. When removing flow-mask,
if necessary, we shrink mask array.
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Tested-by: Greg Rose <gvrose8192@gmail.com>
Acked-by: William Tu <u9012063@gmail.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Port the codes to linux upstream and with little changes.
Pravin B Shelar, says:
| mask caches index of mask in mask_list. On packet recv OVS
| need to traverse mask-list to get cached mask. Therefore array
| is better for retrieving cached mask. This also allows better
| cache replacement algorithm by directly checking mask's existence.
Link: https://github.com/openvswitch/ovs/commit/d49fc3ff53c65e4eca9cabd52ac63396746a7ef5
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Tested-by: Greg Rose <gvrose8192@gmail.com>
Acked-by: William Tu <u9012063@gmail.com>
Signed-off-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The idea of this optimization comes from a patch which
is committed in 2014, openvswitch community. The author
is Pravin B Shelar. In order to get high performance, I
implement it again. Later patches will use it.
Pravin B Shelar, says:
| On every packet OVS needs to lookup flow-table with every
| mask until it finds a match. The packet flow-key is first
| masked with mask in the list and then the masked key is
| looked up in flow-table. Therefore number of masks can
| affect packet processing performance.
Link: https://github.com/openvswitch/ovs/commit/5604935e4e1cbc16611d2d97f50b717aa31e8ec5
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Tested-by: Greg Rose <gvrose8192@gmail.com>
Acked-by: William Tu <u9012063@gmail.com>
Signed-off-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The commit ab92d68fc22f ("net: core: add generic lockdep keys") removed
all lockdep functionality from soft-interface.c but didn't remove the
include for this functionality.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
The usage of the '/* fall through */' comments in switches are no longer
marked as non-deprecated variant of implicit fall throughs for switch
statements. The commit 294f69e662d1 ("compiler_attributes.h: Add
'fallthrough' pseudo keyword for switch/case use") introduced a replacement
keyword which should be used instead.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
'aggr_list.lock' can safely be used in place of another explicit spinlock
when access to 'aggr_list' has to be guarded.
This avoids to take 2 locks, knowing that the 2nd one is always successful.
Now that the 'aggr_list.lock' is handled explicitly, the lock-free
__sbk_something() variants should be used when dealing with 'aggr_list'.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
Use 'skb_queue_purge()' instead of re-implementing it.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
Alexei Starovoitov says:
====================
pull-request: bpf-next 2019-11-02
The following pull-request contains BPF updates for your *net-next* tree.
We've added 30 non-merge commits during the last 7 day(s) which contain
a total of 41 files changed, 1864 insertions(+), 474 deletions(-).
The main changes are:
1) Fix long standing user vs kernel access issue by introducing
bpf_probe_read_user() and bpf_probe_read_kernel() helpers, from Daniel.
2) Accelerated xskmap lookup, from Björn and Maciej.
3) Support for automatic map pinning in libbpf, from Toke.
4) Cleanup of BTF-enabled raw tracepoints, from Alexei.
5) Various fixes to libbpf and selftests.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The only slightly tricky merge conflict was the netdevsim because the
mutex locking fix overlapped a lot of driver reload reorganization.
The rest were (relatively) trivial in nature.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Daniel Borkmann says:
====================
This set adds probe_read_{user,kernel}(), probe_read_str_{user,kernel}()
helpers, fixes probe_write_user() helper and selftests. For details please
see individual patches.
Thanks!
v2 -> v3:
- noticed two more things that are fixed in here:
- bpf uapi helper description used 'int size' for *_str helpers, now u32
- we need TASK_SIZE_MAX + guard page on x86-64 in patch 2 otherwise
we'll trigger the 00c42373d397 warn as well, so full range covered now
v1 -> v2:
- standardize unsafe_ptr terminology in uapi header comment (Andrii)
- probe_read_{user,kernel}[_str] naming scheme (Andrii)
- use global data in last test case, remove relaxed_maps (Andrii)
- add strict non-pagefault kernel read funcs to avoid warning in
kernel probe read helpers (Alexei)
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Tested on x86-64 and Ilya was also kind enough to give it a spin on
s390x, both passing with probe_user:OK there. The test is using the
newly added bpf_probe_read_user() to dump sockaddr from connect call
into .bss BPF map and overrides the user buffer via bpf_probe_write_user():
# ./test_progs
[...]
#17 pkt_md_access:OK
#18 probe_user:OK
#19 prog_run_xattr:OK
[...]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/90f449d8af25354e05080e82fc6e2d3179da30ea.1572649915.git.daniel@iogearbox.net
|
|
Use probe read *_{kernel,user}{,_str}() helpers instead of bpf_probe_read()
or bpf_probe_read_user_str() for program tests where appropriate.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/4a61d4b71ce3765587d8ef5cb93afa18515e5b3e.1572649915.git.daniel@iogearbox.net
|
|
Use bpf_probe_read_user() helper instead of bpf_probe_read() for samples that
attach to kprobes probing on user addresses.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/5b0144b3f8e031ec5e2438bd7de8d7877e63bf2f.1572649915.git.daniel@iogearbox.net
|
|
Commit 2a02759ef5f8 ("bpf: Add support for BTF pointers to interpreter")
explicitly states that the pointer to BTF object is a pointer to a kernel
object or NULL. Therefore we should also switch to using the strict kernel
probe helper which is restricted to kernel addresses only when architectures
have non-overlapping address spaces.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/d2b90827837685424a4b8008dfe0460558abfada.1572649915.git.daniel@iogearbox.net
|
|
The current bpf_probe_read() and bpf_probe_read_str() helpers are broken
in that they assume they can be used for probing memory access for kernel
space addresses /as well as/ user space addresses.
However, plain use of probe_kernel_read() for both cases will attempt to
always access kernel space address space given access is performed under
KERNEL_DS and some archs in-fact have overlapping address spaces where a
kernel pointer and user pointer would have the /same/ address value and
therefore accessing application memory via bpf_probe_read{,_str}() would
read garbage values.
Lets fix BPF side by making use of recently added 3d7081822f7f ("uaccess:
Add non-pagefault user-space read functions"). Unfortunately, the only way
to fix this status quo is to add dedicated bpf_probe_read_{user,kernel}()
and bpf_probe_read_{user,kernel}_str() helpers. The bpf_probe_read{,_str}()
helpers are kept as-is to retain their current behavior.
The two *_user() variants attempt the access always under USER_DS set, the
two *_kernel() variants will -EFAULT when accessing user memory if the
underlying architecture has non-overlapping address ranges, also avoiding
throwing the kernel warning via 00c42373d397 ("x86-64: add warning for
non-canonical user access address dereferences").
Fixes: a5e8c07059d0 ("bpf: add bpf_probe_read_str helper")
Fixes: 2541517c32be ("tracing, perf: Implement BPF programs attached to kprobes")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/796ee46e948bc808d54891a1108435f8652c6ca4.1572649915.git.daniel@iogearbox.net
|
|
Convert the bpf_probe_write_user() helper to probe_user_write() such that
writes are not attempted under KERNEL_DS anymore which is buggy as kernel
and user space pointers can have overlapping addresses. Also, given we have
the access_ok() check inside probe_user_write(), the helper doesn't need
to do it twice.
Fixes: 96ae52279594 ("bpf: Add bpf_probe_write_user BPF helper to be called in tracers")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/841c461781874c07a0ee404a454c3bc0459eed30.1572649915.git.daniel@iogearbox.net
|
|
Add two new probe_kernel_read_strict() and strncpy_from_unsafe_strict()
helpers which by default alias to the __probe_kernel_read() and the
__strncpy_from_unsafe(), respectively, but can be overridden by archs
which have non-overlapping address ranges for kernel space and user
space in order to bail out with -EFAULT when attempting to probe user
memory including non-canonical user access addresses [0]:
4-level page tables:
user-space mem: 0x0000000000000000 - 0x00007fffffffffff
non-canonical: 0x0000800000000000 - 0xffff7fffffffffff
5-level page tables:
user-space mem: 0x0000000000000000 - 0x00ffffffffffffff
non-canonical: 0x0100000000000000 - 0xfeffffffffffffff
The idea is that these helpers are complementary to the probe_user_read()
and strncpy_from_unsafe_user() which probe user-only memory. Both added
helpers here do the same, but for kernel-only addresses.
Both set of helpers are going to be used for BPF tracing. They also
explicitly avoid throwing the splat for non-canonical user addresses from
00c42373d397 ("x86-64: add warning for non-canonical user access address
dereferences").
For compat, the current probe_kernel_read() and strncpy_from_unsafe() are
left as-is.
[0] Documentation/x86/x86_64/mm.txt
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: x86@kernel.org
Link: https://lore.kernel.org/bpf/eefeefd769aa5a013531f491a71f0936779e916b.1572649915.git.daniel@iogearbox.net
|
|
Commit 3d7081822f7f ("uaccess: Add non-pagefault user-space read functions")
missed to add probe write function, therefore factor out a probe_write_common()
helper with most logic of probe_kernel_write() except setting KERNEL_DS, and
add a new probe_user_write() helper so it can be used from BPF side.
Again, on some archs, the user address space and kernel address space can
co-exist and be overlapping, so in such case, setting KERNEL_DS would mean
that the given address is treated as being in kernel address space.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/bpf/9df2542e68141bfa3addde631441ee45503856a8.1572649915.git.daniel@iogearbox.net
|
